Maytag MDBH949PAM0 User Instructions

Marque: Maytag

Modèle: MDBH949PAM0

Catégorie: Lave-vaisselle

Taper: User Instructions

THANK YOU for purchasing this high-quality product. Ifyou should experience a problem not covered in TROUBLESHOOTING,

please visit our website at www.maytag.com for additional information. Ifyou still need assistance, call us at 1-800-688-9900.

In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.

You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.

Para obtener acceso a "lnstrucciones para el usuario de la lavavajillas" enespa_ol, o para informaci6n adicional de su producto

visite : www.maytag.com

Tenga listo su nSmero de modelo completo. Puede encontrar su nQmerode modelo y de serie en la etiqueta ubicada cerca de la

puerta al lado derecho o izquierdo del interior de la lavavajillas.

b/e ..........

DISHWASHER SAFETY ............................................................. 1

QUICK STEPS ............................................................................. 3

DISHWASHER USE .................................................................... 3

CYCLE AND OPTION DESCRIPTIONS .................................... 5

DISHWASHER FEEDBACK ....................................................... 7

DISHWASHER FEATURES ........................................................ 8

DISHWASHER CARE ................................................................. 9

TROUBLESHOOTING .............................................................. 10

WAR RANTY .............................................................................. 12

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

W10401489A

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

[] Read all instructions before using the dishwasher. [] Do not tamper with controls.

[] Use the dishwasher only for its intended function.

[] Use only detergents or rinse agents recommended for use in

a dishwasher, and keep them out of the reach of children.

[] When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut-type injuries.

[] Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

[] Do not touch the heating element during or immediately after

use.

[] Do not operate the dishwasher unless all enclosure panels

are properly in place.

[] Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

[] To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

[] Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

[] Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

SAVE THESE iNSTRUCTiONS

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for

electric current. The dishwasher is equipped with a cord

having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

[]

Check with a qualified electrician or service representative

if you are in doubt whether the dishwasher is properly

grounded. Do not modify the plug provided with the

dishwasher; if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the dishwasher.

SAVE THESE iNSTRUCTiONS

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

Prepare and load _f'_

dishwasher. _

Select a cycle and option (cycles and options vary

by model).

[] [] [] [] [] []

cycles soil sensing technology

248

[] [] [] [] ___ []

l t

.... b wash ihre_ ted isanitize i h.... i tCo°cn_r°L

options

2 Add detergent

and rinse aid. S

_ Start dishwasher.

[]

15tartI

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other

hard items from the dishes. Remove labels from containers before

washing.

Upper rack

Alternative Rack Loading.

Lower rack

Upper rack Lower rack

Make sure nothing keeps spray arm(s) from

spinning freely. It is important for the water

spray to reach all soiled surfaces.

) ._

Make sure that when the dishwasher door is closed no items

are blocking the detergent dispenser.

• Items should be loaded with soiled surfaces facing down and

inward to the spray as shown. This will improve cleaning and

drying results.

• Avoid overlapping items like bowls or plates that may trap food.

• Place plastics, small plates and glasses in the upper rack.

Wash only plastic items marked "dishwasher safe."

• To avoid thumping/clattering noises during operation: Load

dishes so they do not touch one another. Make sure lightweight

load items are secured in the racks.

When loading silverware, always place sharp

items pointing down. Mix other items

pointing up and some pointing down.

STEP 2

Add Detergent

NOTE: If you do not plan to run a wash cycle soon, run a rinse

cycle. Do not use detergent.

• Use automatic dishwasher detergent only. Add powder, liquid

or tablet detergent just before starting a cycle.

• Fresh automatic

dishwasher

detergent results in

better cleaning. Store

tightly closed

detergent container

in a cool, dry place.

• For optimum

performance, tablet

detergent is

recommended.

Premeasured Detergents

Many detergents now come in premeasured forms (gel packs,

tablets, or powder packs). These forms are suitable for all hardness

and soil levels. Always place premeasured detergents in the main

compartment and close the lid.

Using dishwasher detergent tablets and packs have been proven

better than powder, liquid or gel detergents to reduce filming on

your dishes. By using these tablets and packs, over time this will

start to reduce or eliminate white film. Also, by using a rinse aid you

can minimize repeat buildup of white film.

Powder and Gels

• The amount of detergent to use depends on:

How much soil remains on the items - Heavily soiled loads

require more detergent.

The hardness of the water - If you use too little in hard water,

dishes won't be clean. If you use too much in soft water,

glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon)

[typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon)

[well water and some city water]

• Depending on your water hardness, fill the Main Wash section

of the dispenser as shown. Fill the Pre-Wash section to the

level shown, if needed.

NOTE: Fill amounts shown

are for standard powdered

detergent. Follow instructions

on the package when using

other dishwasher detergent.

Add Rinse Aid

HardWater

SoftWater

HerdWater

SoftWater

MainWash Pre-Wash

Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid your dishes and dishwasher

interior will have excessive moisture. The heated dry option will

not perform as well without rinse aid.

Rinse aid keeps water from forming droplets that can

dry as spots or streaks. It also improves drying by

allowing water to drain off of the dishes after the final

rinse.

Rinse aid helps to reduce excess moisture on the

dish racks and interior of your dishwasher.

Full

Add

Check the rinse aid indicator. Add rinse aid when indicator

drops to "Refill" level.

To add rinse aid, turn the

dispenser cap to "Open"

and lift off. Pour rinse aid

into the opening until the

indicator level is at "Full."

Replace the dispenser cap

and turn to "Lock." Make

sure cap is fully locked.

USERINSEAIDFOR

BETTERDRYINGLock i

Open_ Add

1/4turn to lock

NOTE: For most water conditions, the

factory setting of 2 will give good

results. If you have hard water or

notice rings or spots, try a higher

setting. Turn the arrow adjuster inside

the dispenser by either using your

fingers or inserting a flat-blade

screwdriver into the center of the

arrow and turning.

STEP3

Select a Cycle (cycles vary by model)

See "Cycle and Option Descriptions" charts in the following

section.

Heavier cycles and options affect cycle length. Some cycles and

options will take up to 31/2hours to complete.

m m m m m m

I ..... ..... 1

..........I,,oo° Iw,,, °

cycles soil sensing technology

Select Options (options vary by model)

See "Cycle and Option Descriptions" charts in the following

section.

You can customize your cycles by pressing the options desired and

press Start/Resume.

p m m m _

(touh ' steam detay 1

scrugt_ I hiatsehmp Idhr(_ted Isanitize Ih.... IICo°cn_r°l

options

Start or Resume a Cycle

• Run hot water at the sink nearest your dishwasher until the

water is hot. Turn off water.

• Push door firmly closed. The door latches

automatically. Select the wash cycle and options [start I

desired and press START/RESUME OR press

START/RESUME to repeat the same cycle and

options as in the previous wash cycle.

• You can add an item anytime before the main wash starts.

Open the door slowly and add the item. Close the door firmly.

Press the START/RESUME button, the cycle resumes

automatically at the point of interruption.

For fully integrated models (controls on top of console)

• Select the wash cycle and options desired.

• Press the START/RESUME button once and close the door.

After a brief pause, the cycle will begin. The door must be

closed within 3 seconds after pushing START/RESUME or the

lights will flash, and the dishwasher will not begin. Press the

START/RESUME button again and shut the door within

3 seconds.

You can add an item anytime before the main wash starts. Open

the door slowly and add the item. Press the START/RESUME then

close the door.

S'%JO'II;I:I_=" =

cycles soil sensing technology options

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

_c(eal m salitized

CYCLES

This Cycle senses the load Sizel s0il amoUnt, and

n toughness of soil. This cycle is optimized to achieve the

II#t% best cleaning with minimal water and energyl

This is the toughest cycle for your toughest food soils.

Use for hard-to-clean, heavily soiled pots, pans,

casseroles, and regular tableware.

SOIL LEVEL WASH TIME* (MINS.) WATER

USAGE

Typical** Max GALLONS

W/O (Liters)

Options

I I

Light to Medium 90 150 4;2 (16,1)

Tough!Baked,On I 95 !60 7;!(26,8)

I ;

Heavy. 95 160 7;1 (26,8)

Tough/Baked- 135 160 12.3 (46.6)

On/Heavy

Use for hard,to,clean, heavily soi!ed pots, pans, Heavy!Baked,On 100 160 7:1 (26,8)

casseroles, and regu!ar tab!eware.This cyc!e forces

maximum time, water, and heat. During thewash, the I I I I

he=vy wash act on w repeated y pause for severe seconds I I I I

. .

150 4.2 (16.1)

I normal

Senses the soil level and makes adjustments in the

water and energy used. The Energy Guide information

is based on this cycle.

Light

Medium

Heavy

150

5.1 (19.1)

7.1 (26.8)

I i i i i

I i i i

quick

l wash

For fast results, this cycle will clean your lightly soiled

dishes using more water and energy. For improved

drying, select the heated dry option.

Use for rinsing dishes glasses and silverware that Wi!!

not be washed right awaY:

1117

Do not use detergent, During the wash, the wash action

will repeated!y pause for several seconds.

Light to Medium 35 55 7.1 (26.8)

All s0il levels 20 20 119(7i2)

Wash times depend on water temperature, heavy soil condition, dish load size and options selected. Adding options will add time to the

cycle.

*Adding options will add time to the cycle. See options information section.

**This is the approximate cycle time obtained with 120°F (49°C) hot water available at the dishwasher. Increase in time results from low

temperature of the incoming water.

OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH: ADDED

TIME TO

CYCLE

Tough food s0 S Adds heat and wash t me to the cyc e JetCeanPusSteam, Norma, 5mn.

I and Auto Clean I

tou_h

• , , ,

Tough food soils Increases the target water Jet Clean Plus Steam, Normal, 10 rain.

,m temperature during the wash portions and Auto Clean

hi temp

Iw=sh of the cycle. Adds heat, time, and

water.

I AII!0ads ' Use for best drying results in Jet Clean Plus Steam, N0rmal, 25 min,

combination with rinse aid, Turn off Light, Quick Wash and Auto Clean

"°=°_ When cads conta n past c

cjihnn;;wa:re;[qat mdaylb_ tsienstiie t0

. higher temperatures,

steam

Isanitize

To sanitize your dishes Raises the water temperature in the Jet Clean Plus Steam, Normal, 30 min.

and glassware final rinse to approximately 154°F and Auto Clean

(68°C). This high temperature rinse

sanitizes your dishes and glassware

in accordance with NSF/ANSl

Standard 184 for Residential

Dishwashers. Certified residential

dishwashers are not intended for

licensed food establishments.The

Sanitize option adds heat and time to

the cycle.

DelaYs the start Of a CYc!eup to Ai! cYc!es 2;

8 hours. ' hours

All loads When Control Lock is lit, all buttons All cycles

are disabled. If you press any pad

while your dishwasher is locked, the

light flashes. The door can be opened

while the controls are locked.

CONTROLS AND CYCLE STATUS

CONTROL PURPOSE COMMENTS

To start or iesume a If the door is opened during a cYcle or the power is interrupted, the START/RESUME

wash cycle indicator f!ashes. The cycle wi!I not resume until the door is closed and START/RESUME is

pressed.

NOTE" Ifthe START/RESUME button is located ontop of door, push door firm!y closed

within 3 seconds of pressing START/RESUME. Ifthe door is not closed within 3 seconds,

the start button LED will flash, an audible tone wi!! be heard (on som e models), and the

cYClewill not start,

To reset any cycle or

options during

selection.

To cancel a wash

cycle after it's

started.

Press CANCEL/DRAIN to reset any control selections made.

See "Canceling A Cycle" and "Changing a Cycle After Dishwasher Is Started" sections.

To turn the audible Press and hold the Hi Temp Wash button for3 Seconds to turn the audible tones on or off.

,,= tones on or off. Only audible tones for confirming button presses can be turned on/off, Important audible

hi temp

Iw=,, tones, such as indicating a cycle has been interrupted, cannot be deactivated, (Not

available on all models.)

CONTROL PURPOSE COMMENTS

m w_sh m d_v mclean m sanitized

The Cycle Status Indicator Clean indicator glows when a cycle is finished.

Lights are used to follow the If you select the Steam Sanitize option, when the Steam Sanitize cycle is

progress OTme oJsnwasner finished, the Sanitized indicator glows. Ifyour dishwasher did not properly

cycle. Located on the front sanitize your dishes, the light flashes at the end of the cycle. This can

of the dishwasher for front

control models, and located happen if the cycle is interrupted, or the water could not be heated to the

on the top of the door for required temperature.

hidden control models. The Clean and Sanitized lights go off when you open and close the door or

press CANCEL.

Canceling A Cycle

1. Open the door slightly to stop the cycle. Wait for the spraying

action to stop before completely opening the door.

2. Press CANCEL/DRAIN button once. The Cancel/Drain light will

light up.

3. Close the door and the dishwasher starts a drain cycle (ifwater

remains in bottom of dishwasher). Let the dishwasher drain

completely. The Cancel/Drain light turns off after 2 minutes.

Changing A Cycle After Dishwasher Is Started

1. You can interrupt a cycle and restart your dishwasher from the

beginning using the following procedure.

2. Open the door slightly to stop the cycle. Wait for the spraying

action to stop, then open the door completely.

3. Check that detergent dispenser cover is still closed. If cover is

open, you will need to refill the detergent dispenser before

restarting your new cycle.

4. Press CANCEL!DRAIN twice to reset the control.

5. Select new cycles and options.

6. Press START/RESUME.

Adding A Dish After Dishwasher Is Started

1. Check if Add a Dish indicator is lit. (Available on some models.

Otherwise, proceed to Step 2.)

2. Open the door slightly to stop the cycle. Wait for the spraying

action to stop, then open the door completely.

3. Check whether the detergent dispenser cover is still closed. If

it is open, the wash cycle has already started and adding a

dish is not recommended.

4. If detergent has not yet been used (detergent dispenser cover

is closed), you may add a dish.

5. Press START/RESUME.

Your Maytag dishwasher may have some or all of these features.

Split & FitTM Utensil Basket

The split silverware basket can be

separated and placed in various

locations in the lower rack. Load

flatware and utensils into both

sections or just one, depending on

your load.

To split the basket:

Hold the basket firmly along the

sides. Unlock the baskets.

Silverware basket lids:

Use silverware basket lids to provide

optimal spacing and best cleaning

performance.

Cup Clips

The Cup Clips located in the center of the upper

rack can be used to hold lightweight plastic items,

cooking utensils and knives in place. Clip the item

between the tine and the clip.

Cup Shelf

Fold down the extra shelf on the left-hand

or right-hand side of the top rack to hold

additional cups, stemware, or long items

such as utensils and spatulas.

Removable Upper Rack

The removable rack allows you to wash larger items such as stock

pots, roasters, and cookie sheets in the lower level rack.

IMPORTANT: Remove dishes prior to removing the upper rack

from the dishwasher.

To remove the rack (push tab rack stop):

1. Roll the rack ½ to ½ of the way out.

2. Remove each plastic push tab rack stop

from the end of each track by pushing

inward toward the rack on the ridged area

of the rack stop. The rack stop will snap

open and can be easily removed by

pulling straight out. Be sure to support the

track while removing rack stops.

Roll the rack all the way out of the track and remove from the

dishwasher.

To replace the rack:

Reverse the above steps 1-3 to replace the rack into the

dishwasher.

Manual Adjustable 2-Position Top Rack

oao

Iower the top _ __ _.

rack to fit tall

items in either

the top or

bottom rack.

Adjusters are _/

located on each

side of the top _:_;,,_

rack. Raise the _ _:_

top rack to

accommodate

items up to 9" (22 cm) in the top rack and 13" (33 cm) in the bottom

rack, or lower the top rack to accommodate items up to 11"

(28 cm) in both the top and bottom racks.

IMPORTANT: Remove dishes prior to removing the top rack from

the dishwasher.

To raise, remove rack and slide lower wheels into the rails as

directed in "Removable Upper Rack" section.

To lower, remove rack and slide upper wheels into the rails as

directed in "Removable Upper Rack" section.

CLEANING THE DISHWASHER

Cleaning the exterior

Clean the exterior of the dishwasher with a soft, damp cloth and

mild detergent. Ifyour dishwasher has a stainless steel exterior, a

stainless steel cleaner is recommended - Stainless Steel Cleaner

and Polish Part Number 31464.

Cleaning the interior

Clean the interior of the dishwasher, with a paste of powdered

dishwasher detergent and water or use liquid dishwasher detergent

on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is

an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe

measuring cup on the bottom rack. Run the dishwasher through a

complete washing cycle without using a heated dry option. Do not

use detergent. Vinegar will mix with the wash water.

Dishwasher Maintenance Procedure

To help avoid odor or odor-causing residue inyour dishwasher, use

affresh ®_dishwasher and disposer cleaner (recommended) once a

month as part of routine maintenance. Affresh ®dishwasher and

disposer cleaner is effective in all dishwasher brands.

IMPORTANT:

• Read these instructions and the instructions found on the

affresh®product package completely before beginning the

cleaning process.

• Use foil wrapper or gloves when handling the tablet.

1. Remove all dishware from the dishwasher. Open the

dishwasher and place 1 affresh ®dishwasher and disposer

tablet in the main detergent tray and close the tray. Place

another tablet in the prewash tray or simply place 1 tablet in

the bottom of the dishwasher. Close the dishwasher. Run the

dishwasher on the most aggressive cycle - heavy duty scrub,

heated water, etc.

2. Place 1 affresh ®dishwasher and disposal tablet into the

garbage disposal. Turn on hot water to slow flow. Run the

disposal and water for 15 seconds. Turn off disposal and

water. Do not flush disposal completely with water. Water from

the dishwasher will clean out the disposal. If no garbage

disposal, skip this step.

Drain air gap

If you have a drain air gap,

check and clean it if the

dishwasher isn't draining

well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months,

turn off the water and power supply to the dishwasher. In the

winter, if the dishwasher could be exposed to near freezing

temperatures or is left in aseasonal dwelling such as a second

home or vacation home, avoid water damage by having your

dishwasher winterized by authorized service personnel.

t_,AFFRESH is a registered trademark of Whirlpool, U.S.A.

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

PROBLEM SOLUTION

DISHWASHER DOES

NOT RUN

NOTE: It is normal for the dishwasher to repeatedly pause several times during a cycle.

If the START/RESUME light is blinking, press START/RESUME and close the door firmly within

3 seconds.

Be sure the door is closed and latched.

Be sure you have selected a cycle. (See "Cycles and Options Descriptions.")

Be sure there is power to the dishwasher. A circuit breaker or fuse may have tripped.

If lights other than START/RESUME blink and the unit will not run, you will need to call for service.

DETERGENT REMAINS IN THE

DISPENSER OR

TABLET IS ON BOTTOM

OFTUB

Check for dishware such as cookie sheets, cutting boards, or large containers, etc., that may be

blocking the detergent dispenser from opening properly.

Be sure your detergent is fresh and lump free.

Be sure the cycle has completed (green light is on). If it has not completed, you will need to resume

the cycle by pressing START/RESUME and closing the door within 3 seconds.

CYCLE RUNS TOO LONG NOTES:

• To use less water and reduce energy consumption you will encounter cycles that typically run

for up to 3 hours.

• A water heater setting of 120°F (49°C) is best. The dishwasher will delay longer while heating

cooler water.

• Some options will add time to the cycle. (See "Cycles and Options Descriptions" section.) The

Heated Dry option adds 1/2hour.

Try the Quick Wash cycle.

Run the hot water at a faucet close to the dishwasher before starting the cycle.

DISHWASHER NOT DRYING

NOTE: Plastic and items with nonstick surfaces are difficult to dry because they have a porous

surface which tends to collect water droplets. Towel drying may be necessary.

Use of rinse aid along with the Heated Dry option is needed for proper drying.

Proper loading of items can affect drying. (See specific loading instructions within this guide.)

Glasses and cups with concave bottoms hold water. This water may spill onto other items when

unloading.

• Unload the bottom rack first.

• Locate these items on the more slanted side of the rack for improved results.

WILL NOT FILL Be sure the water is turned on to the dishwasher.

Check that the float is free from obstructions. (See "Parts and Features.")

Check for suds in the dishwasher. If foam or suds are detected, the dishwasher

may not operate properly or may not fill with water.

WATER REMAINS IN THE TUB/

WILL NOT DRAIN

Be sure the cycle has completed (the green light is on). If the cycle has not completed, you will need

to resume the cycle by pressing START/RESUME and closing the door within 3 seconds.

If dishwasher is connected to a food waste disposer, be sure the knockout plug has been removed

from the disposer inlet.

Check for kinks in the drain hose.

Check for food obstructions in the drain or disposer.

Check your house fuse or circuit breaker.

HARD WATER

(WHITE RESIDUE ON

DISHWASHER INTERIOR OR

G LASSWAR E)

NOTE: Extremely hard water mineral deposits can cause damage to your dishwasher and make it

difficult to achieve good cleaning. A water softener is strongly recommended if your hardness is

15 grains or more. If a water softener is not installed, the following steps may help:

Use a commercial cleaner designed for dishwashers once per month.

Always use a rinse aid.

Always use a high-quality, fresh detergent.

Use a detergent booster/water softener additive designed for dishwashers.

ODORS

NOTE: If the dishwasher is not used daily, you can run a rinse cycle with the partial load daily until a

full load is ready to run.

Run a vinegar rinse through the dishwasher by putting 2 cups (500 mL) of white vinegar in an

upright glass measuring cup in the lower rack. Run a normal cycle with the Heated Dry option

turned off. Do not use detergent.

The dishwasher may not be draining properly. See "WATER REMAINS IN THE TUB/WILL NOT

DRAIN" in "Troubleshooting."

PROBLEM SOLUTION

NOISY

FOOD SOILS REMAIN

ON DISHES

DID NOT SANITIZE

DAMAGE TO DISHWARE

BLINKING LIGHTS

CLOUDY OR SPOTTED

DISHWARE (AND HARD

WATER SOLUTION)

ETCHING (PERMANENT

CLOUDINESS)

LEAKING WATER

NOTES:

• Surging sounds can occur periodically throughout the cycle while the dishwasher is draining.

• Normal water valve hissing may be heard periodically.

• A normal snap sound may be heard when the detergent dispenser opens during the cycle and

when the door is opened at the end of the cycle.

• Improper installation will affect noise levels.

Press and hold HI TEMP WASH for 3 seconds to turn the audible tones on or off.

Be sure the filters are properly installed.

A thumping sound may be heard if items extend beyond the racks and interfere with the wash arms.

Readjust the dishware and resume the cycle.

Be sure the dishwasher is loaded correctly. Improper loading can greatly decrease the washing

performance (see "Prepare and Load the Dishwasher").

Select the proper cycle and option for the type of soils. The Jet Clean Plus Steam cycle with the

Steam Sanitize option can be used for tougher loads.

Be sure the incoming water temperature is at least 120°F (49°C).

Use the proper amount of fresh detergent. More detergent is needed for heavier-soiled loads and

hard water conditions.

Scrape food from dishes prior to loading (do not prerinse).

If the sanitized light is blinking, the load is NOT sanitized. The cycle was interrupted in the final

rinse, or your water heater is set too low. Set your water heater to 120°F (49°C).

Improper loading can cause dishes to become chipped or damaged. (See specific loading

instructions within this guide.)

Ifthe START/RESUME light is blinking, press START/RESUME and close the door within 3 seconds.

If the Clean light or any other lights are blinking and the dishwasher will not run, call for service.

NOTES:

• Liquid rinse aid is necessary for drying and to reduce spotting.

• Use the correct amount of detergent.

Confirm that the cloudiness is removable by soaking the item in white vinegar for 5 minutes. If the

cloudiness disappears, it is due to hard water. Adjust the amount of detergent and rinse aid. See

("HARD WATER [WHITE RESIDUE ON DISHWASHER INTERIOR OR GLASSWARE]") in

"Troubleshooting." If it does not come clear, it is due to etching (see below).

Be sure the incoming water temperature is set at 120°F (49°C).

Try using the Hi Temp and Steam Sanitize options.

To remove spotting, run a vinegar rinse through the dishwasher.

• Wash and rinse the affected dishware and load into dishwasher. Remove all silverware and

metal items. Put 2 cups (500 mL) of white vinegar in a glass measuring cup in the lower rack.

Run a normal cycle with the Heated Dry option turned off. No detergent is needed.

This is an erosion of the surface of the glassware and can be caused by a combination of: water

that is too hot, from using too much detergent with soft water or by pre-washing. Detergent needs

food soil to act upon. If etching has occurred, the glassware is permanently damaged. To avoid

further etching, adjust the detergent amount to match the water hardness, stop pre-washing, and

use water heating options only when incoming water temperature is below 120°F (49°C).

Be sure dishwasher has been installed properly and is level.

Suds can cause the dishwasher to overflow. Measure the detergent accurately and use only

detergents designed for use in a dishwasher. Less detergent is needed in soft water. Try another

brand of detergent if sudsing continues.

To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached and avoid

overfilling.

TUB IS DISCOLORED NOTES:

• High iron content in the water can discolor the tub.

• Tomato-based foods can discolor the tub or dishware.

A citrus-based cleaner can be used to clean.

visdN'A ,c,MASOR RRAN /'

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter "Maytag") will pay for factory

specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Maytag designated service

company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the

country in which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original

purchase date is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair

house fuses, or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is

contrary to published user or operator instructions and/or installation instructions.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of consumables or cleaning products not approved by Maytag.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Maytag within 30 days from the date of purchase.

6. Any food loss due to refrigerator or freezer product failures.

7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be

repaired in the home and only in-home service is covered by this warranty.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Maytag servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty is

void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. MAYTAG SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS,

SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

If outside the 50 United States and Canada, contact your authorized Maytag dealer to determine if another warranty applies.

9/o7

For additional product information, in the U.S.A., visit www.maytag.com

In Canada, visit www.maytag.ca

Ifyou do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact Maytag at the number below.

Have your complete model number ready. You can find your model number and serial number on the label located near the door on the

right-hand or left-hand side of the dishwasher interior.

For assistance or service in the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777.

If you need further assistance, you can write to Maytag with any questions or concerns at the address below:

In the U.S.A.: In Canada:

Maytag Brand Home Appliances Maytag Brand Home Appliances

Customer eXperience Center Customer eXperience Centre

553 Benson Road 200 - 6750 Century Ave.

Benton Harbor, MI 49022-2692 Mississauga ON L5N 0B7

Please include a daytime phone number in your correspondence.

Please keep this User Instructions and model number information for future reference.

W10401489A

SP W10438315A

@2012

1/12

Printed in U.S.A.

Nous vous REMERCIONS d'avoir achete ce produit de haute qualite. Si vous rencontrez un probleme non mentionne dans la

section DI_PANNAGE,veuillez visiter notre site Web www.maytag.com pour des informations supplementaires. Si vous avez

toujours besoin d'assistance, veuillez nous tel6phoner au 1-800-688-9900. Au Canada, visitez notre site Web www.maytag.ca ou

tel6phonez-nous au 1-800-807-6777.

Vous aurez besoin de vos num@os de modele et de s@iesitues pres de la porte sur lec6te droit ou gauche, A I'int@ieur du lave-

vaisselle.

b/e

SECURITE OU L_VE-VAISSELLE ........................................... 13

ET_PES RAP_DES .................................................................... 15

UTILISATION DU LAVE-VAISSELLE ...................................... 15

DESCRIPTION DES PROGRAMMES ET OPTIONS .............. 17

SECTION COMMENTAIRES SUR L'UTILISATION

DU LAVE-VAISSELLE .............................................................. 20

CARACTI:!::RISTIQUES DU LAVE-VAISSELLE ........................ 21

ENTRETIEN DU LAVE-VAISSELLE ......................................... 22

DEPANNAGE ............................................................................ 23

GARANTIE ................................................................................. 26

cu4@ isse/te

Votre securite et celle des autres est tres importante.

Nous donnons de nombreux messages de s_curit_ importants dans ce manuel et sur votre appareil m_nager. Assurez-vous de

toujours lire tousles messages de s_curit_ et de vous y conformer.

Voici le symbole d'alerte de s_curit_.

Ce symbole d'alerte de s_curit_ vous signale les dangers potentiels de d_c_s et de blessures graves a vous

eta d'autres.

Tousles messages de s_curit_ suivront le symbole d'alerte de s_curit_ et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient •

Risque possible de d_ces ou de blessure grave si vous ne

suivez pas imm_diatement les instructions.

Risque possible de d_ces ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de s_curit_ vous diront quel est le danger potentiel et vous disent comment r_duire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

IMPORTANTES INSTRUCTIONS DE SI_CURITI_

AVERTISSEMENT : Lors de I'utilisation du lave-vaisselle, suivre les precautions el6mentaires dont les suivantes :

m Lire la totalite des instructions avant d'utiliser le

lave-vaisselle.

m N'utiliser le lave-vaisselle que pour laver la vaisselle.

m Utiliser uniquement les detersifs ou agents de ringage

recommandes pour lave-vaisselle et les garder hors de la

portee des enfants.

m Lorsque vous chargez le lave-vaisselle :

1) Placer les objets coupants de fagon qu'ils ne puissent

endommager lejoint de la porte; et

2) Placer les couteaux le manche vers le haut de fagon &ne

pas vous couper.

m Ne pas laver d'articles en plastique & moins qu'ils nesoient

marques "Peut aller au lave-vaisselle" ou I'equivalent. Si

I'article ne porte aucune indication, verifier aupres du

fabricant.

m Ne pas toucher I'el6ment chauffant pendant le

fonctionnement ou immediatement apres.

m Ne pas faire fonctionner le lave-vaisselle si tousles

panneaux de I'enceinte ne sont pas en place.

m Ne pas jouer avec les commandes.

m Ne pas abuser, vous asseoir ni monter sur la porte,

le couvercle ou les paniers du lave-vaisselle.

m Pour eviter tout risque d'accident, ne pas laisser les

enfants jouer dans ou sur le lave-vaisselle.

m Sous certaines conditions, de I'hydrogene peut se former

dans un reseau d'eau chaude inutilise depuis deux

semaines ou plus. L'HYDROG#NE EST UN GAZ

EXPLOSIBLE. Si le systeme d'eau chaude n'a pas et6

utilise depuis un certain temps, laisser couler I'eau chaude

des robinets pendant quelques minutes avant de faire

fonctionner le lave-vaisselle. Cette mesure permettra &

I'hydrogene de s'evaporer. Ce gaz etant inflammable, ne

pas fumer ni utiliser de flamme nue pendant cette periode.

m Enlever la porte ou le couvercle du compartiment de lavage

Iorsque vous remplacez ou mettez au rebut un vieux

lave-vaisselle.

CONSERVEZ CES INSTRUCTIONS

Avertissements de la proposition 65 de I'¢:tat de Californie :

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par I'¢:tat de Californie pour 6tre & I'origine de

cancers.

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par I'¢:tat de Californie pour 6tre & I'origine de

malformations et autres d6ficiences de naissance.

iNSTRUCTIONS DE MISE A LA TERRE

Pour un lave-vaisselle reli6 & la terre, branch6 avec un

cordon :

Le lave-vaisselle doit etre relie& la terre. En cas d'un

mauvais fonctionnement ou d'une panne, la raise &terre

reduira le risque d'un choc electrique en fournissant le moins

de resistance pour le courant electrique. Le lave-vaisselle est

equipe d'un cordon avec un conducteur pour relier les

appareils & la terre et d'une fiche de raise &la terre. La fiche

doit etre branchee sur une prise appropriee, installee et reliee

& la terre conformement aux codes et reglements Iocaux.

AVERTiSSEMENT : La connexion incorrecte du

conducteur pour relier les appareils &la terre peut causer le

risque de choc electrique. Verifier avec un electricien

competent ou un representant de service si vous avez

des doutes si le lave-vaisselle est correctement relie & la

terre. Ne pas modifier la fiche fournie avec le lave-

vaisselle; si elle n'entre pas dans la prise, faire installer

une prise appropriee par un electricien competent.

Pour un lave=vaisselle branch_ en permanence :

Le lave-vaisselle doit etre branche & un systeme

d'installation electrique permanent en metal relie& la

terre, ou un conducteur pour relier les appareils & la terre

doit etre relie avec les conducteurs du circuit et branche

&une borne pour relier les appareils &la terre ou au

cordon d'alimentation electrique avec le lave-vaisselle.

CONSERVEZ CES INSTRUCTIONS

Risque de basculement

Ne pas utiliser le lave=vaisselle jusqu'a ce qu'il soit compl_tement installS.

Ne pas appuyer sur la porte ouverte.

Le non-respect de ces instructions peut causer des blessures graves ou des coupures.

Preparer et _f'_

charger le lave- _QI

vaisselle.

S_lectionner un programme et une option (les

programmes et options varient selon le module.)

cycles soil sensing technology

_o,=u_i_'_' il,__°_i_n,_,_oi".... i,_o°'_='

options

Verser le

d_tergent et

I'agent de

rin(;age.

_ Mettre en marche

le lave-vaisselle.

Preparation et chargement du lave-vaisselle

IMPORTANT : Enlever les restes alimentaires, os, cure-dents et

autres articles durs de la vaisselle. Enlever les etiquettes des

recipients avant de les laver.

Panier sup#rieur

Autre m_thode de chargement.

Panier inf#rieur

Panier sup#rieur

Panier inf#rieur

S'assurer que rien n'emp_che le(s) bras

d'aspersion de tourner librement. IIest

important que lejet d'eau atteigne toutes

les surfaces sales.

• Verifier qu'aucun article ne bloque le distributeur de detergent

Iorsque la porte du lave-vaisselle est fermee.

• Charger dans le panier les articles en orientant la surface sale

vers I'interieur, vers le bras d'aspersion, tel qu'illustr& Ceci

ameliorera les resultats de nettoyage et de sechage.

• 12viterle chevauchement d'articles tels que bols ou assiettes

pouvant retenir les aliments.

• Placer les articles de plastique, les petites assiettes et les

verres dans le panier superieur. Ne laver au lave-vaisselle que

les articles de plastique identifies comme "lavable au lave-

vaisselle".

Pour eviter les bruits de choc et d'entrechoc durant le

fonctionnement : Charger la vaisselle de fa(;on & ce que les

articles ne se touchent pas les uns les autres. S'assurer que les

articles legers sont bien retenus dans les paniers.

Pour le chargement des couverts, les articles

pointus doivent toujours _tre orientes vers le

bas. Orienter certains articles vers le haut et

d'autres vers le bas Iorsqu'on les place

ensemble.

Verser le d_tergent

REMARQUE : Si vous n'avez pas I'intention d'effectuer un

programme de lavage dans I'immediat, executer un programme de

rin£;age. Ne pas utiliser de detergent.

• Utiliser uniquement du detergent pour lave-vaisselle

automatique. Verser le detergent en poudre, liquide ou en

pastille juste avant de demarrer un programme.

• Pour de meilleurs

resultats de lavage,

il est recommande

d'utiliser un

detergent & lave-

vaisselle

automatique frais.

Conserver le

recipient du

detergent bien

ferme dans un lieu

sec et frais.

• Pour une performance optimale, on recommande I'utilisation

d'un detergent en pastille.

D_tergents pr_-mesur_s

Beaucoup de detergents sont vendus en format pre-mesur6

(sachets de gel, pastilles ou sachets de poudre). Ces formats sont

ideaux quelle que soit la durete de I'eau et de salet& Toujours

placer les detergents pre-mesur6s dans le compartiment principal

et fermer le couvercle.

IIest prouve que les detergents pour lave-vaisselle en pastilles ou

en sachet reduisent plus efficacement la formation de pellicule sur

la vaisselle que les detergents liquides, en poudre ou en gel. Gr&ce

& I'utilisation reguliere de ces pastilles et sachets, la pellicule

blanche commencera a diminuer ou & disparaYtre. L'utilisation d'un

agent de rin£;age peut aussi vous aider a reduire la frequence de

formation de cette pellicule blanche.

Produits sous forme de poudre ou de gel

• La quantite de detergent & utiliser depend des elements

suivants :

Degre de salete de la vaisselle - les charges tres sales

necessitent plus de detergent.

Durete de I'eau - si I'on n'utilise pas assez de detergent avec

une eau dure, la vaisselle ne sera pas parfaitement lavee. Si

I'on utilise trop de detergent avec une eau douce, la solution

attaquera les articles en verre.

Eau douce &moyenne (0 & 6 grains par gallon U.S.)

[eau venant d'adoucisseur d'eau general et eau du service

d'eau de la ville]

Eau moyenne a dure (7 a 12 grains par gallon U.S.)

[eau de puits et du service d'eau de la ville]

• Selon la durete de I'eau, remplir la section de lavage principal

du distributeur tel qu'illustr& Remplir la section de prelavage

jusqu'au niveau indique, si necessaire.

REMARQUE : Les quantites

indiquees correspondent a X Hardwater II HardWater

I'emploi d'un detergent en S0ftWater J

poudre standard. Lors de

I'utilisation d'un autre Lavageprincipal Pr_lavage

detergent, proceder

conformement aux instructions indiquees sur I'emballage.

Verser I'agent de ringage

Votre lave-vaisselle est con(;u pour utiliser un agent de rin(;age

afin d'obtenir un sechage satisfaisant. Sans agent de rin£;age,

la vaisselle et I'interieur du lave-vaisselle seront trop humides.

L'option de sechage avec chaleur ne fonctionnera pas de

maniere optimale sans agent de rin(;age.

• Un agent de rin£;age emp_che I'eau de former des _ Full

gouttelettes qui peuvent laisser des taches ou des

coulees en sechant. II ameliore egalement le sechage

en permettant a I'eau de s'ecouler de la vaisselle

apres le rin£;age final.

• Un agent de rin(_ageaide a reduire I'exces d'humidite Add

sur les paniers a vaisselle et & I'interieur du lave-

vaisselle.

Contr61er I'indicateur d'agent de rin(;age. Ajouter de I'agent de

rin£;age Iorsque I'indicateur tombe au niveau "Refill" (remplir).

Pour ajouter de I'agent de

rin£;age, tourner le

bouchon du distributeur

sur "Open" (ouvrir) et le

soulever pour le degager.

Verser I'agent de rin£;age

dans I'ouverture jusqu'& ce

que I'indicateur soit sur

"Full" (plein). Remettre en

place le bouchon du

distributeur et le tourner

jusqu'& ce qu'il soit sur

"Lock" (verrouillage).

S'assurer que le bouchon

est bien verrouill&

USERINSEAIDFOR Full

BETTERDRYING

Lock

Open_ Add

¼ tour pour verrouiller

REMARQUE : Pour la

plupart des types d'eau, le

reglage 2 effectue & I'usine

donnera de bons resultats.

Si I'eau du domicile est dure

ou si I'on remarque la

presence d'anneaux ou de

taches, essayer un reglage

plus elev& Tourner I'ajusteur

&fleche & I'interieur du distributeur soit &la main, soit en inserant

un tournevis & lame plate au centre de la fleche et en tournant.

ETAPE 3

S_lectionner un programme (les programmes varient

selon les modules)

Voir les tableaux "Descriptions des programmes et des options"

dans la section qui suit.

Les programmes plus intenses et les options modifient la duree du

programme. L'execution de certains programmes et options

prendra jusqu'& 31/2heures.

B m m B m m

.........I I.o,, I

cycles soil sensing technology

S_lectionner des options (les options varient selon le

module)

Voir les tableaux "Descriptions des programmes et des options"

dans la section qui suit.

On peut personnaliser les programmes en appuyant sur les options

desirees et sur Start/Resume (mise en marche/reprise).

tou h " steam delay 1

eptions

F:TAPE4

D_marrer ou reprendre un programme

• Laisser couler I'eau du robinet le plus proche du lave-vaisselle

jusqu'& ce qu'elle soit chaude. Fermer le robinet.

• Bien fermer la porte. Le verrou de la porte s'engage

automatiquement. Selectionner le programme de

lavage et les options souhaites et appuyer sur

START/RESUME (mise en marche/reprise) OU

appuyer sur START/RESUME pour rep6ter le m_me

programme et les m_mes options que le programme de lavage

prec6dent.

• On peut ajouter un article &n'importe quel moment avant le

debut du lavage principal. Ouvrir la porte doucement et ajouter

I'article. Bien fermer la porte. Appuyer sur le bouton START/

RESUME (mise en marche/reprise), le programme reprend alors

automatiquement I&oQ il a et6 interrompu.

Pour les modules pleinement int_gr_s (commandes sur

la console)

• Choisir le programme et les options de lavage desir6s.

• Appuyer une fois sur le bouton START/RESUME (mise en

marche/reprise) et fermer la porte. Apres une courte pause, le

programme commence. La porte doit _tre fermee dans les

3 secondes qui suivent la selection de START/RESUME. A

defaut, les temoins clignotent et le lave-vaisselle nese met pas

en marche. Appuyer & nouveau sur le bouton START/RESUME

et fermer la porte dans les 3 secondes.

On peut ajouter un article &n'importe quel moment avant le debut

du lavage principal. Ouvrir la porte doucement et ajouter I'article.

Appuyer sur START/RESUME puis refermer la porte.

m m m m m m

...........I ,000 Iw0, °

cycles soil sensing technology

_ _ _ _ /_ R r_l __ Imwash Idry Iclea n Isanitize d

' steam delay ]

toughscrub Ihwlatsehrnp Idhr_ ted Isanit,ze Ih.... I,_oo'_r°'

options

Ces renseignements couvrent plusieurs modeles differents. Votre lave-vaisselle peut ne pas comporter tousles programmes et options

indiques.

PROGRAMMES NIVEAU DE

SALETI_

DURI_E DE LAVAGE* (MIN) CON-

SOM-

Normal** Max MATION

sans D'EAU EN

options GALLONS

(Litres)

Ce programmedetectel ataille de lacharge, laquantite _ L6ger&mod6r6 I 90 _ !50 . 4,2 (16,!)

de saletes et I adherence des saletes. Ce programme

I_%% est optimis6 pour atteindre un nettoyage max ma avec Difficile/Adh6rant 160 711(26,8 )

un minimum d eau et d energie ' aux surfaces I I I

I apr_s cuisson I I I

• Intense

IIs'agit du programme le plus puissant pour nettoyer Tenace/Adherant 135 160 12,3 (46,6)

les saletes les plus tenaces. Utiliser ce programme aux surfaces

jetdean pour les casseroles, les po_les et la vaisselle ordinaire apres cuisson/

difficiles & nettoyer et tres sales. Difficile

i i I

Utiliser ce programme pour les casseroles, les po61es Difficile/Adh#rant 100 160 7,1(26,8)

et lavaisselle ordinaire difficiles A nettoyer et tr_s sales, aux surfaces

ce programme requiert une duree de lavage Un apr_s cuisson

Vo ume d eau et un n veau de cha eu[ max maux: Lors

Ihe"vy du lavage, I'action de lavage fera des pauses r6p6tees I I I I

pendant quelques secondes. I I I I

I normal

Detecte le niveau de salete et effectue les ajustements

de consommation d'eau et d'energie necessaires.

Uetiquette de consommation d'energie est basee sur

ce programme.

Leger 90

Moyenne 90

Intense 90

150 4,2 (16,1)

150 5,1 (19,1)

150 7,1 (26,8)

Utiliser Ce programme pour les articles legerement Leger 70

B sales.

-- i i

i i i i

, i i i

PROGRAMMES NIVEAU DE

SALETI_

DURI_E DE LAVAGE* (MIN)

Normal** Max

sans

options

CON-

SOM-

MATION

D'EAU EN

GALLONS

(Litres)

quick

wash

Pour des resultats rapides, ce programme utilise plus

d'eau et d'energie pour nettoyer la vaisselle. Pour un

meilleur sechage, selectionner I'option Heated Dry

(sechage avec chaleur).

utiliser ce pr0gramme poUr rincer la_aissellel !es

verres et les couverts qui ne seront pas lav6s

Jrinse [ imm6diatement.

dN!pa_g!t_ JeSaerdd:s_etesrgent L_t?ed p leavc_get' _:C_qnes

Leger a moder6 35 55

Tousles niveaux 20 20

de salet6

7,1 (26,8)

i i

Les durees de lavage dependent de la temperature de I'eau, du degre de salete, de la taille de la charge de vaisselle ainsi que des options

selectionn6es.

*Certaines options augmenteront la dur_e du programme. Voir la section d'information sur les options.

**Dur_e de programme approximative obtenue avec de I'eau chaude & 120°F (49°C) fournie au lave-vaisselle. Si les dur_es sont plus

Iongues, cela signifie que I'eau d'arriv_e est moins chaude.

OPTIONS Types de charges de DESCRIPTIONS

vaisselle

A UTILISER AVEC : DURI_E

SUPPLI_-

MENTAIRE

DU PRO-

GRAMME

R6siduS alimentaires ceci augmente le niveau de chaleui Jet Clean Plus steam (nettoyage 5 min

[ tenace s [et !a dur6ede !avage du pr0gramme [ par aspersion avec vapeu0, [

Itou_, I Normal et Auto Clean

. (autonettoYage)

Residus alimentaires Augmente la temperature cible de Jet Clean Plus Steam (nettoyage 10 rain

== tenaces I'eau durant les etapes de lavage du par aspersion avec vapeur),

hi temp

Iwa,h programme. Ajoute de la chaleur, du Normal et Auto Clean

temps et de I'eau au programme. (autonettoyage)

Toutes !es charges A uti!iser avec un agent de ringage Jet C!ean Plus Steam (nettoyage 25 rain

_.. pourun me eur s_chage, D6sactver par asperson avecvapeur),

I_,'?ted I !0rsque les charges contiennent de la Normal, Light (16ger),Quick Wash

I I vaissel!e en p!astique susceptible de (lavage rapide) et Auto Clean

ne pas r6sister & des temp6ratures (autonettoyage)

. 61ev6es. : :

Pour assainir la vaisselle,

y compris les articles en

verre

steam

sanitize

Lors du ringage final, la temperature

de I'eau s'eleve & environ 154°C

(68°C). Ce rin(_age & haute

temperature assainit la vaisselle et la

verrerie conformement & la norme

184 NSF/ANSI pour lave-vaisselle &

usage domestique. Les lave-vaisselle

&usage domestique certifies ne sont

pas destines aux etablissements

alimentaires autorises. L'option

Sanitize (assainissement) augmente

le niveau de chaleur et la duree du

programme.

Jet Clean Plus Steam (nettoyage

par aspersion avec vapeur),

Normal et Auto Clean

(autonettoyage)

30 min

OPTIONS

Types de charges de

vaisselle

DESCRIPTIONS A UTILISER AVEC : DURI_E

SUPPLI_-

MENTAIRE

DU PRO-

GRAMME

Toutes les charges Lorsque Control Lock (verrouillage

des commandes) est allume, tousles

boutons sont desactiv6s. Si I'on

appuie sur une touche alors que le

lave-vaisselle est verrouille, le temoin

lumineux clignote. On peut ouvrir la

porte alors que les commandes sont

verrouillees.

Tousles programmes

COMMANDE FONCTION COMMENTAIRES

Pour d6marrer ou Si I'on ouvre la porte durant un programme ou si une panne de cou rant se produit, le

poursuivre un t6mol n lumineux START/RESUME (mlse en marche/reprise) clignote. Le programme ne

programme de reprend pas tant que la porte n'est pas ferm6e et que I'on n'a pas appuy6 sur START/

lavage RESUME (mise en marche/reprise)

REMARQUE • Si le bouton START/RESUME (mise en marche/reprise) se trouve sur le

dessus de la porte, bien fermer la porte dans les 3 secondes qui suivent I'appui sur la

touche START/RESU ME (mise en marche/reprise). Si la porte n'est pas ferm6e dans les

3 secondes qui suivent, le bouton de mise en marche DEL clignote, un signal sonore

retentit et le programme ne d6marre pas.

Pour revenir &tout

programme/option

initial au cours de la

selection.

Pour annuler un

programme de

lavage apr_s son

demarrage.

Appuyer sur CANCEL/DRAIN (annulation/vidange) pour revenir a toute selection de

commande initiale.

Voir les sections "Annulation d'un programme apr_s le demarrage du lave-vaisselle" et

"Modification d'un programme apr_s le demarrage du lave-vaisselle".

Pour activer ou Appuyer surle bouton Hi Temp Wash (lavage a haute temp6rature)pendant 3 sec0ndes

d6sactiver !es pour activer ou d6sactiver les signaux sonores. Seuls les signaux sonores de confirmation

hitemp signaux sonores, d activation de boutons sont activables/d6sactivablesl Les signaux sonores importants

iwasn , , [, , [ ....

tels ceux indlquant I interrupt!on dun programme, ne sont pas desactlvables (Option qul

n'esst pas disponible sur tous les modules.)

COMMANDE FONCTION COMMENTAIRES

[] wash [] dry [] cLea_l [] sanitized

Les indicateurs lumineux de L'ind _cateur Clean (propre) s'allume Iorsqu'un programme est term n&

1'6tat d'avancement du

programme illustrent la

progression du programme

du lave-vaisselle, IIssont

situ6s & I'avant du lave-

vaisselle sur les mod@les

disposant des commandes

Lorsq ue I'on s61ectionne 'option Sani-Rinse (ringage avec

assainissement), I'indicateur Sanitized (assainissement) s'allume d@sque

le programme est termin& Si le lave-vaisselle n'a pas bien assaini la

vaisselle, le t6moin clignote & la fin du programme. Ceci peut se produire si

le programme a 6t6 interrompu ou si I'eau n'a pas pu 6tre suffisamment

chauff6e pour atteindre la temp6rature requ ise.

I'avant, et sur le dessus de la Le voyant Clean and Sanitized (propre et assaini) s'6teint Iorsque I'on

porte pour les mod@les dont ouvre et ferme la porte ou que I'on appuie sur CANCEL (annulation).

les commandes sont

dissimul6es,

Annulation d'un programme

1. Ouvrir legerement la porte pour arr_ter le programme. Attendre

que I'action d'arrosage s'arr_te avant d'ouvrir la porte.

2. Appuyer une fois sur le bouton CANCEL/DRAIN (annulation/

vidange). Le temoin lumineux Cancel/Drain (annulation/

vidange) s'allume.

3. Fermer la porte et le lave-vaisselle entame un programme de

vidange (s'il reste de I'eau au fond du lave-vaisselle). Laisser le

lave-vaisselle evacuer I'eau completement. Le temoin Cancel/

Drain (annulation/vidange) s'eteint apr_s 2 minutes.

Ajout d'un plat apr_s la mise en marche du lave-

vaisselle

Modification d'un programme apr_s la mise en marche

du lave-vaisselle

1. On peut interrompre un programme et redemarrer le lave-

vaisselle depuis le debut en suivant la procedure suivante.

2. Ouvrir legerement la porte pour arr_ter le programme. Attendre

que I'action d'arrosage s'arr_te avant d'ouvrir la porte.

3. Verifier que le couvercle du distributeur de detergent est bien

ferm& Si le couvercle est ouvert, remplir & nouveau le

distributeur de detergent avant de redemarrer un nouveau

programme.

4. Appuyer deux fois sur CANCEL!DRAIN (annulation/vidange)

pour reinitialiser le module de commande.

5. Choisir un nouveau programme et les options.

1. Verifier que le temoin lumineux Add a Dish (ajouter un plat) est

bien allum& (sur certains modeles. Sinon, passer a I'etape 2.)

2. Ouvrir legerement la porte pour arr_ter le programme. Attendre

que I'action d'arrosage s'arr_te avant d'ouvrir la porte.

3. Verifier que le couvercle du distributeur de detergent est

toujours ferm& S'il est ouvert, cela signifie que le programme

de lavage a d6j& commence et il n'est pas conseille d'ajouter

un plat.

4. Si I'on n'a pas encore utilise de detergent (couvercle du

distributeur de detergent ferme), on peut ajouter un plat.

5. Appuyer sur START/RESUME (mise en marche/reprise).

6. Appuyer sur START/RESUME (mise en marche/reprise).

La page charge ...

Maytag MDBH949PAM0 User Instructions

Marque: Maytag

Modèle: MDBH949PAM0

Catégorie: Lave-vaisselle

Taper: User Instructions

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MDBH949PAM0

Maytag MDBH949PAM0 User Instructions

Maytag MDBH949PAM0 User Instructions

dans d''autres langues

Documents connexes

Autres documents