Yamaha CDC-95 Manuel utilisateur

Marque: Yamaha

Modèle: CDC-95

Catégorie: Lecteur CD

Taper: Manuel utilisateur

IMPORTANT!

Please record the serial number of this

unit in the space below.

Model:

Serial No.:

The serial number is located on the rear

of the unit.

Retain this Owner’s Manual in a safe

place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

Natural Sound Compact Disc Player

5-Disc Carousel Auto-changer

PLAYXCHANGE; Disc changing capability while playing another

Random Access Programmable Play

Random-Sequence Play

Single Track/Entire Disc/All Disc Repeat Play

CDC-95

Thank you for selecting this YAMAHA Compact Disc Player.

OWNER’S MANUAL

CONTENTS

Safety Instructions.................... 2

Connections............................. 4

Identification of Components.... 5

Loading the Disc/Disc Play....... 6

Random-Sequence Play .......... 9

Program Play.......................... 10

Repeat Play............................ 12

Notes about Handling

Compact Discs....................... 13

Troubleshooting...................... 14

Specifications......................... 14

SAFETY INSTRUCTIONS

1 Read Instructions – All the safety and operating

instructions should be read before the unit is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other instructions

should be followed.

5 Water and Moisture – The unit should not be used near

water – for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a swimming

pool, etc.

6 Carts and Stands – The unit should be used only with a

cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the unit and cart combination

to overturn.

7 Wall or Ceiling Mounting – The unit should be mounted to

a wall or ceiling only as recommended by the

manufacturer.

8 Ventilation – The unit should be situated so that its

location or position does not interfere with its proper

ventilation. For example, the unit should not be situated

on a bed, sofa, rug, or similar surface, that may block the

ventilation openings; or placed in a built-in installation,

such as a bookcase or cabinet that may impede the flow

of air through the ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances that

produce heat.

10 Power Sources – The unit should be connected to a

power supply only of the type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should be

unplugged from the outlet when left unused for a long

period of time.

14 Object and Liquid Entry – Care should be taken so that

objects do not fall into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The unit should be serviced

by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into the

unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet damaged.

16 Servicing – The user should not attempt to service the unit

beyond those means described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17 Power Lines – An outdoor antenna should be located

away from power lines.

18 Grounding or Polarization – Precautions should be taken

so that the grounding or polarization is not defeated.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

IMPORTANT!

Please record the serial number of this unit in the space

below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference

1 To ensure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install your unit in a cool, dry, clean place – away from

windows, heat sources, and too much vibration, dust,

moisture or cold. Avoid sources of hum (transformers,

motors). To prevent fire or electrical shock, do not expose

to rain and water.

3 Do not operate the unit upside-down. It may overheat,

possibly causing damage.

4 Never open the cabinet. If a foreign object drops into the

set, contact your dealer.

5 Do not use force on switches, knobs or cords. When

moving the set, first turn the unit off. Then gently

disconnect the power plug and the cords connecting to

other equipment. Never pull the cord itself.

6 Do not attempt to clean the unit with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

7 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that your unit

is faulty.

8. Do not place another component on top of this unit,

because to do so will discolor or damage the surface of

the unit.

9. To prevent damage by lightning, disconnect the power

cord from the household AC outlet during an electrical

storm.

10. When disconnecting the power cord from the household

AC outlet, grasp the plug; do not pull the cord.

11. When moving the unit, be sure to first disconnect the

power cord from the household AC outlet, and disconnect

cords connected to other equipment.

CAUTION FOR CARRYING THIS UNIT

Be sure not to carry or tip the unit with discs remaining in it.

CAUTION FOR MOVING THIS UNIT

When moving this unit, first remove all discs from the disc tray and

close the tray by pressing the OPEN/CLOSE button, and then

switch off the power after you confirm that the display indicates as

follows.

Never switch off the power if the display is not pictured as above,

otherwise the unit will get out of order during moving because the

internal mechanism is not locked.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT

As the laser beam used in this compact disc player is harmful

to the eyes, do not attempt to disassemble the cabinet. Refer

servicing to qualified personel only.

To avoid electrical shock, do not open the unit. Refer

servicing to qualified personnel only.

DANGER: The use of optical instrument with this product will

increase eye hazard.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

DANGER

Invisible laser radiation when open and interlock failed or

defeated.

Avoid direct exposure to beam.

The apparatus is not disconnected from the AC power

source as long as it is connected to the wall outlet, even if

the apparatus itself is turned off.

WARNING

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring or

distortion – and, most importantly, without affecting your

sensitive hearing. Since hearing damage from loud sounds is

often undetectable until it is too late, YAMAHA

and the Electronic Industries Association’s

Consumer Electronics Group recommend you to

avoid prolonged exposure from excessive

volume levels.

We Want You Listening For A Lifetime

Laser Diode Properties

• Material: GaAlAs

• Wavelength: 780nm

• Emission Duration: continuous

• Laser Output: max. 44.6µW*

* This output is the value measured at a distance of about

200mm from the objective lens surface on the Optical Pick-

up Block.

CONNECTIONS

●

Before making any connections, switch OFF the power to

the unit and the amplifier or other component.

●

Connect the “LINE OUT” terminals to the “CD” (or “AUX”)

terminals of the amplifier. If the amplifier does not have

such terminals, use the “TAPE PB” terminals. For additional

details concerning these connections, refer to the operation

instructions for the amplifier being used.

●

Be sure that the left (“L”) and right (“R”) LINE OUT terminals

are connected to the corresponding (left and right) terminals

of the amplifier or other component.

●

If the placement of this unit causes noise to other

equipment, such as a tuner, separate them from each other.

To AC outlet

This unit

Amplifier

Connection cord (included)

IDENTIFICATION OF COMPONENTS

FRONT PANEL

* Remote control sensor

The remote control sensor receives the control signal from

the remote control transmitter that belongs to the system

amplifier.

ENGLISH

POWER

TIME

1 2345

SKIP

PROG

PLAYXCHANGE

OPEN/CLOSE

PLAY

STOP

DISC SKIP

CLEAR

REPEAT

RANDOM

DISC

MODE

DIMMER

PAUSE

OPEN/CLOSE

button

buttons

DISC SKIP

STOP

button

PLAYXCHANGE

button

PLAY

RANDOM button

REPEAT

button

PROG

button

SKIP

button

select button

TIME

display mode-

Display panel

*Remote control sensor

POWER

switch

DISC

-select buttons

select button

Disc play -

MODE

Disc tray

DIMMER button

button

PAUSE

button

CLEAR

LOADING THE DISC/DISC PLAY

Select the disc play mode (DISC MODE: SINGLE or

ALL) while watching the display.

“SINGLE” mode: The unit will play a designated disc only.

“ALL” mode: The unit will play all discs in the tray in

sequence.

* If necessary, select a desired disc by using a DISC-select

button or the DISC SKIP buttons.

Notes

●

After closing the disc tray by pressing the OPEN/CLOSE

button in the stop mode or after selecting any disc by using

the DISC SKIP buttons, the display shows the total number

of tracks and the total recorded time of the disc to be played

for a few seconds.

●

Additionally, you can close the disc tray by pressing the

PLAY button, a DISC-select button or the RANDOM button,

or by pressing the front edge of the disc tray gently. If the

tray is closed in these ways, play will begin automatically,

however, the display will not show the total number of tracks

and the total recorded time of the first disc to be played.

PLAYXCHANGE

During play, you can open the disc tray by pressing the

PLAYXCHANGE button without interrupting disc play.

However, in this case, pressing the DISC SKIP buttons has no

effect.

Note

You can load or replace discs on the trays when the disc tray

is opening, however, never load a disc on the tray hidden

inside the unit. If doing so, the disc and the unit may be

damaged, because the tray already has a disc, which is being

played.

6 6 2,4

3,6

DISC SKIP

Shows the selected disc

mode.

Label side

upward

Disc tray

Load the fifth disc.

To stop play temporarily

* To resume play, press the PAUSE button again or the

PLAY button.

To stop play completely

SKIP PLAY

●

To play from the beginning of the track following the one

now playing

●

To play from the beginning of the track now playing

●

To play from the beginning of the track before the one now

playing

* These operations can also be performed when the unit is in

the pause or stop mode.

(twice)

Display information at disc play

➀

Encloses the tray number of the disc standing by to be

played or the disc now playing.

➁

Shows the tray numbers with discs.

➂

Shows the track number to be played.

➃

Shows the time displays. (Refer to “Selecting time

displays” on the next page.)

➄

Displays the numbers that correspond to the numbers of

the tracks (as high as number 15) on the disc. After each

track is played, its corresponding number disappears so

the number of remaining tracks (and their numbers) can be

seen at a glance.

ENGLISH

To play a desired track on the disc

➀➁➂ ➃

➄

To advance or reverse play rapidly (MANUAL SEARCH)

To advance rapidly

To reverse rapidly

●

The sound can be heard (although slightly garbled) during

manual search in either direction. This is convenient for

locating a precise position within a track, or for reviewing the

contents quickly.

●

Manual search can also be performed while disc play is

paused, though no sound will be heard.

Notes

●

The remaining time

➁

will not be displayed for track

number 21 or higher.

●

You can also select one of the three levels of brightness of

the display by pressing the DIMMER button.

Selecting time displays

You can select any of the four time displays by pressing the TIME display mode-select button.

(press and hold)

➀

Elapsed time of the track now playing

➁

Remaining time of the track now playing

➂

Total disc play time

➃

Total remaining time on the disc

RANDOM-SEQUENCE PLAY

You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any

desired disc in the disc tray.

Select whether to mix up tracks from one disc or all

discs in the tray.

* If the “SINGLE” disc play mode is selected, next select a

desired disc by using the DISC SKIP buttons or a DISC-

select button.

To cancel random-sequence play

Press the STOP button or RANDOM button once again, or

open the disc tray by pressing the OPEN/CLOSE button.

Notes

●

This feature will not function during programming, or during

programmed play.

●

If the POWER is switched off when the random-sequence

play mode is functioning, when the POWER is switched on

again, the unit will begin the random-sequence play

automatically. (This feature is available for timer play.)

●

If the SKIP button is pressed during random-sequence

play, the next randomly programmed track will be played. If

the SKIP button is pressed, play will return to the

beginning of the track now being played.

●

This indication appears while the unit is

mixing up tracks.

●

Total remaining time on the disc will not be displayed during

random-sequence play.

ENGLISH

PROGRAM PLAY

You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play.

➀

Shows the program number for the track to be set next.

➁

Shows the selected disc and track number.

➂

Shows the total time of the tracks currently programmed, if

tracks are selected from one disc only.

➃

Shows only the numbers of programmed tracks.

* If “P-01” does not appear in the display after the PROG

button is pressed, press the TIME display mode-select

button.

* If the total time reaches 100 minutes or more, only the last

two-digits will be displayed for the three-digit number.

153

(Press once.)

(Select a track

number.)

Stop the unit.

If necessary, select the desired disc.

Select the desired track.

When the programming is completed;

*Repeat step 3 and 4 to set more programs.

Display information during program play

➀

➁➂

➃

DISC SKIP

Notes

●

You can set as many as 20 programs at one time.

●

If you will make programming with the DISC 1 tray empty,

be sure to press a DISC SKIP button before starting

programming.

●

The total time of the programed tracks will not be displayed,

if tracks are selected from more than one disc.

●

The total time of the programmed tracks will not be

displayed, if a track number higher than 20 is programmed.

●

If, during programming, the TIME display mode-select

button is pressed, the program number display can be

changed to display the total time of the programmed tracks .

To return to the previous display, press the TIME display

mode-select button once again.

●

The SKIP ( and ) button can be used during

playing, but only within the range of the programmed tracks.

●

The SEARCH ( and ) button can be used during

playing to search through all tracks, including

unprogrammed tracks.

To stop program play

●

Press the STOP button. The first track number

programmed will be displayed.

●

To resume play, press the PLAY button. Play will begin

from the beginning of the program.

To cancel a programmed setting

There are several methods, as described below.

●

Press the CLEAR button while the unit is stopped.

●

Press the STOP button while the unit is stopped.

●

Open the disc tray.

●

Switch off the power.

To check programmed data

1. If the unit is in the play mode, press the STOP button.

2. Press the PROG button.

3. Each time the SKIP button is pressed, the track

numbers and sequential order of the programmed tracks

can be checked one after another. The display of the track

number can be returned (sequentially in reverse order) by

pressing the SKIP button.

To correct programmed data

1. Follow the procedure described in “To check programmed

data”.

2. Display the track number to be corrected by pressing the

SKIP button.

3. Press the SEARCH button several times until the track

number to replace the previous one appears, and then

press the SKIP button once. The previously programmed

track is cleared from the memory and the new one is

programmed.

4. After the correction has been completed, press the PROG

button or PLAY button once again.

ENGLISH

REPEAT PLAY

You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will

change whenever you press the REPEAT button.

SINGLE REPEAT (S REP)

A single track is repeatedly played.

* This is also available in the programmed-play mode and the

random-sequence play mode. (If the repeat play mode is

switched off, the programmed-play mode or the random-

sequence play mode will be resumed.)

FULL REPEAT (F REP)

In the “SINGLE” disc play mode: A designated disc is played

repeatedly.

In the “ALL” disc play mode: All discs in the disc tray are

repeatedly played.

* In the programmed-play mode, all programmed tracks are

repeatedly played.

* In the random-sequence play mode, all randomly sequenced

tracks are repeatedly played in the same order.

(OFF)

REPEAT button

NOTES ABOUT HANDLING COMPACT DISCS

●

This compact-disc player is designed only for playing of

compact discs bearing the mark. Never attempt to

load any other type of disc into the unit.

The unit will also play 3-inch (8-cm) compact discs.

●

To remove a disc from its storage case, open the case and

then press down at the center; with a finger through the

center hole and the outer edges held as shown in the

illustration, lift the disc out carefully.

●

Always handle the disc with care so that its surface is not

scratched.

●

Compact discs are not subjected to wear during play, but

damage to the disc surface when the disc is being handled

can adversely affect the disc's play.

●

Compact discs are not affected by small particles of dust or

fingerprints on their playing surface, but even so they should

be kept clean. Wipe by using a clean, dry cloth. Do not

wipe with a circular motion; wipe straight outward from the

center.

●

Do not try to clean the disc's surface by using any type of

disc cleaner, record spray, anti-static spray or liquid, or any

other chemical-based liquid, because such substances

might irreparably damage the disc's surface.

●

Do not expose discs to direct sunlight, high temperature or

high humidity for a long period of time, because these might

warp or otherwise damage the disc.

To play a 3-inch (8-cm) CD

Place it in the inner recessed area of the disc tray. Do not put

a normal (5-inch/12-cm) CD on top of a 3-inch CD.

ENGLISH

NO!

AUDIO SECTION

Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB

De-emphasis equalization ......................................... ±0.5 dB

Harmonic distortion+noise

(with L.P.F.)..................................... Less than 0.003% (1 kHz)

S/N ratio ........................................................................ 110 dB

Dynamic range ............................................................... 98 dB

Wow & flutter ................................................... Unmeasurable

Output voltage ............................................................. 2±0.5V

GENERAL

Power requirements

U.S.A. and Canada models ............................ 120V, 60 Hz

Australia and U.K. models ............................. 240V, 50 Hz

Europe model ..................................................230V, 50 Hz

General model ...................... 110/120/220/240V, 50/60 Hz

Power consumption ........................................................ 20W

Dimensions (W x H x D) ................... 435 x 107.5 x 386.6 mm

(17-1/8” x 4-1/4” x 15-3/16”)

Weight ..................................................... 5.9 kg (13 lbs. 0 oz.)

Accessories .................................................. Connection cord

Please note that all specifications are subject to change

without notice.

TROUBLESHOOTING

If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple

measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and

contact your authorized YAMAHA dealer or service center for assistance.

SYMPTOM

The player does not switch ON when the

POWER switch is pressed.

The disc tray does not close completely.

A disc number does not illuminate in the

display.

Play does not begin.

Play is delayed, or begins at the wrong

place.

No sound.

Sound “skips”.

Sound “hums”.

Noise from a nearby tuner.

Noise from inside of the disc tray.

PROBABLE CAUSE

The power cord is not connected or not completely

connected.

A foreign object is obstructing the tray.

The disc has been loaded upside down.

The disc is damaged.

There is moisture on the laser pickup.

The disc has been loaded upside down.

The disc is dirty.

The disc may be scratched or damaged.

Improper output cable connections.

Improper amplifier operation.

The player is being subjected to vibrations or

impacts.

The disc is dirty.

Improper cable connections.

The tuner is too close to the player.

The disc may be warped.

REMEDY

Securely connect the power cord.

Carefully check the disc tray and remove the foreign

object.

Load the disc correctly.

Check the disc carefully; replace it if necessary.

Wait 20 to 30 minutes after switching the unit ON

before trying to play a disc.

Reload the disc with the label side up.

Clean the disc.

Check the disc carefully; replace it if necessary.

Connect the cables properly. If the problem

persists, the cables may be defective.

Set the amplifier controls to the correct input

selection.

Relocate the player.

Clean the disc.

Securely connect the audio cables. If the problem

persists, the cables may be defective.

Move the tuner and player farther apart.

Replace the disc.

SPECIFICATIONS

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Yamaha CDC-95 Manuel utilisateur

Marque: Yamaha

Modèle: CDC-95

Catégorie: Lecteur CD

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: Yamaha CDC-95 Manuale utente
English: Yamaha CDC-95 User manual
español: Yamaha CDC-95 Manual de usuario
Deutsch: Yamaha CDC-95 Benutzerhandbuch
русский: Yamaha CDC-95 Руководство пользователя
Nederlands: Yamaha CDC-95 Handleiding
português: Yamaha CDC-95 Manual do usuário
dansk: Yamaha CDC-95 Brugermanual
polski: Yamaha CDC-95 Instrukcja obsługi
čeština: Yamaha CDC-95 Uživatelský manuál
svenska: Yamaha CDC-95 Användarmanual
Türkçe: Yamaha CDC-95 Kullanım kılavuzu
suomi: Yamaha CDC-95 Ohjekirja
română: Yamaha CDC-95 Manual de utilizare

Documents connexes

Yamaha CDC-845 Manuel utilisateur