Dorel Home FA1011-7 Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

Model Number: UPC Code: Color:
DA1011-7 0-65857-17181-5 Walnut
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
NIGHTSTAND
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with
quality, convenience and style in mind. We trust it will provide you with many years of exceptional
comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by
taking a few minutes to go through this booklet. It contains important information on our warranty and
care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the model
number ready when calling our toll free number 1-800-295-1980 or emailing us at d[email protected] .
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
*
Ensure all parts and components are present before beginning assembly.
*
Assemble on a soft, smooth surface to prevent damage to the product finish.
*
A Phillips head screw driver is not included.
*
DO NOT use power tools.
*
* Assembly will require two people.
*
Dorel warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is solely
limited to the repair or replacement of defective furniture components and no assembly
labor is included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any
way. This warranty gives you specific legal rights and you may also have other rights
which vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be
used occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
NOTES:
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Do not use the unit if it is damaged or broken.
CALL 1-800-295-1980
If you have any questions about this product, contact our customer service representative
first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Estimated assembly time: 60 minutes.
MAINTENANCE
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11
HANDLE
1 PC
Ø5/32" * 7/8"
Ø13 * 10 mm
SMALL CAM LOCK
8 PCS
Ø4 * 25 mm
SCREW
12 PCS
Ø4 * 30 mm
Ø6 * 25 mm
Ø6 * 37 mm
Ø8 * 32 mm
Ø15 * 12 mm
Ø6 * 36 mm
LARGE CAM LOCK
18 PCS
WOOD DOWEL
18 PCS
LARGE CAM BOLT
18 PCS
SCREW
12 PCS
BOLT
2 PCS
SMALL CAM BOLT
8 PCS
Ø3.5 * 15 mm
SCREW
3 PCS
WOOD DOWEL
12 PCS
PARTS LIST
FRONT RAIL
2 PCS
LEG
4 PCS
DRAWER BOTTOM
2 PCS
BOTTOM PANEL
1 PC
BACK RAIL
2 PCS
BACK PANEL
1 PC
NIGHTSTAND
DA1011-7
TOP PANEL
1 PC
LEFT SIDE FRAME
1 PC
RIGHT SIDE FRAME
1 PC
PARTS LIST
SMALL LEFT DRAWER
SIDE
1 PC
SMALL DRAWER BACK
1 PC
SMALL DRAWER FRONT
1 PC
TOP BACK RAIL
1 PC
DRAWER SUPPORT RAIL
2 PCS
LARGE DRAWER FRONT
1 PC
SMALL RIGHT DRAWER
SIDE
1 PC
NIGHTSTAND
DA1011-7
LARGE RIGHT DRAWER
SIDE
1 PC
LARGE LEFT DRAWER
SIDE
1 PC
LARGE DRAWER BACK
1 PC
STEP 1
NIGHTSTAND
DA1011-7
Insert large cam bolts (1) into the left side frame (B) and right side frame (C) as shown.
Attach legs (H) to the side frames (B & C) by rotating the legs clockwise.
STEP 2
NIGHTSTAND
DA1011-7
Insert large cam locks (4) into the rails (E, S & G).
Insert wood dowels (2) into the left side frame (B) and right side frame (C).
Secure rails (E, S & G) to the left side frame (B) and right side frame (C) by rotating the
large cam locks (4) 1/2 turn clockwise using a Phillips head screwdriver (not included).
STEP 3
NIGHTSTAND
DA1011-7
Insert large cam bolts (1) into the top panel (A) and bottom panel (D).
STEP 4
NIGHTSTAND
DA1011-7
Insert wood dowels (2) and large cam locks (4) into the left side frame (B) and right side
frame (C).
Fasten top panel (A) and bottom panel (D) to the assembled unit by rotating large cam
locks (4) 1/2-turn clockwise using a Phillips head screwdriver (not included).
Secure top panel (A) with screws (10) using a Phillips head screwdriver (not included).
STEP 5
NIGHTSTAND
DA1011-7
Attach back panel (F) to the assembled unit with screws (7).
Use a Phillips head screwdriver (not included) to tighten the screws.
STEP 6
NIGHTSTAND
DA1011-7
Insert small cam bolts (5) and wood dowels (11) into the large drawer front (N).
Insert small cam locks (3) into the large left drawer side (K) and large right drawer side
(J).
Attach large drawer sides (J & K) to the large drawer front (N). Secure the large drawer
sides (J & K) by rotating small cam locks (3) 1/2-turn clockwise using a Phillips head
screwdriver (not included).
Slide the drawer bottom (I) into the grooves of large drawer sides (J & K) and large
drawer front (N). Attach drawer support rail (M) to the large drawer front (N) using wood
dowels (11) and screw (6) as shown below. Use a Phillips head screwdriver (not
included) to tighten the screw.
STEP 7
NIGHTSTAND
DA1011-7
Insert wood dowels (11) into the drawer support rail (M).
Attach large drawer back (L) to the large drawer sides (J & K) and drawer support rail (M)
with screws (6) using a Phillips head screwdriver (not included).
Attach handle (9) to the large drawer front (N) with bolts (8) using a Phillips head
screwdriver (not included).
STEP 8
NIGHTSTAND
DA1011-7
Insert small cam bolts (5) into the small drawer front (R).
Insert small cam locks (3) into the small left drawer side (P) and small right drawer side
(O).
Attach small drawer sides (P & O) to the small drawer front (R). Secure the small drawer
sides (P & O) by rotating small cam locks (3) 1/2-turn clockwise using a Phillips head
screwdriver (not included).
Slide the drawer bottom (I) into the grooves of small drawer sides (P & O) and front
drawer panel (R). Attach drawer support rail (M) to the small drawer front (R) using wood
dowels (11) and screw (6) as shown below. Use a Phillips head screwdriver (not
included) to tighten the screw.
STEP 9
NIGHTSTAND
DA1011-7
Insert wood dowels (11) into the drawer support rail (M). Attach small drawer back (Q) to
the small drawer sides (P & O) and drawer support rail (M) with screws (6).
Use a Phillips head screwdriver (not included) to tighten the screws.
STEP 10
NIGHTSTAND
DA1011-7
Insert the drawers into the nightstand.
That's it! You've finished assembling your nightstand.
DA1011-7
NIGHTSTAND
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
Top panel
maximum weight
25 LBS
Small drawer
maximum weight -
10 LBS
Large drawer
maximum weight -
15 LBS
MODEL #: DA1011-7
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Phone Number 1-800-295-1980
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Modelo No: CODIGO UPC: Color:
DA1011-7 0-65857-17181-5 Nogal
Fecha de compra: _____ / _____ / _____ Número de lote:
(en la caja)
MESA DE LUZ
¡Felicitaciones por su nueva compra de un mueble! Los muebles de la línea Dorel Living han sido
diseñados con la calidad, la comodidad y el estilo en mente. Estamos seguros de que este mueble
le servirá por muchos años con su comodidad excepcional.
Le recomendamos que antes de comenzar a armarlo se familiarice con su nueva compra y tome
unos minutos de su tiempo para leer este manual. Contiene información importante sobre nuestra
garantía y consejos de cuidados para que su mueble siempre conserve su apariencia de nuevo.
Le damos mucha importancia a Dorel Asia a la satisfacción de nuestros clientes. Nuestros
representantes están disponibles de lunes a viernes de 8 h a 17 h (hora del este) para responder a
todas sus preguntas. Con el fin de acelerar el servicio, por favor tenga a mano el número de
modelo cuando llame a nuestro número sin coste 1-800-295-1980 o por correo electrónico a
Para obtener más ideas de muebles inspirantes, visite nuestro sitio web en www.dorelliving.com
También puede mantenerse informado de todas las últimas tendencias suscribiéndose a
nuestra página en Facebook.
NO DEVUELVA EL PRODUCTO A LA TIENDA. Si falta una pieza o está dañada,
contacte nuestro departamento de servicio a la clientela. Reemplazaremos la pieza SIN
cargo.
NOTA: ESTE MANUAL DE INSTRUCCIONES CONTIENE INFORMACIÓN DE
SEGURIDAD IMPORTANTE. POR FAVOR, LÉALO Y CONSÉRVELO PARA
CONSULTARLO EN EL FUTURO.
* Se necesita un destornillador en cruz (no incluido).
* El armado y la manipulación pueden requerir dos personas.
* El tiempo de armado se estima en 60 minutos.
GARANTÍA LIMITADA
Dorel garantiza que este producto está libre de defectos de material y mano de obra y se
compromete a remediar cualquiera de esos defectos. Esta garantía cubre 1 año a partir de la
fecha de compra original. Esta garantía es válida únicamente si se presenta una prueba de
compra. Esto se limita solamente a la reparación o reemplazo de componentes defectuosos de
los muebles y no incluye el trabajo de armado. Esta garantía no se aplica a ningún producto que
haya sido armado de manera inadecuada, sujeto a un mal uso o abuso o que haya sufrido
cualquier tipo de alteración o reparación. Esta garantía le da las derechas legales específicas y
usted puede también tener otras derechas que varíen de estado al estado.
ADVERTENCIA: Si este producto se ha dañado,
y/o sus componentes están rotos o faltan, NO LO USE.
* No use herramientas eléctricas.
* No use la unidad si está dañado o roto.
CUIDADO Y LIMPIEZA
Límpiela regularmente con un paño suave para evitar la acumulación de suciedad.
Ocasionalmente se puede usar un paño húmedo para limpiar la superficie. Séquela
inmediatamente. No utilice productos abrasivos que puedan dañar la terminación. Una
exposición excesiva a la luz del sol y a cambios extremos de temperatura y humedad puede
dañar los muebles de madera.
MANTENIMIENTO
Verifique las arandelas/tornillos periódicamente y ajústelos si es necesario.
Montreal, Quebec
Canadá H1G 3L1
Correo electrónico: [email protected]
AVERTENCIA
* Para evitar que se raye, por favor retire todo el embalaje y ármelo sobre una superficie
limpia y suave.
* Ensamble sobre una superficie suave, lisa para evitar daños en el acabado del producto.
SERVICIO A LA CLIENTELA
Si faltan piezas o tiene alguna pregunta sobre este producto, ¡primero contacte nuestro representante de
servicio a la clientela!
LLAME AL 1-800-295-1980
También puede pedir piezas escribiendo a la dirección indicada abajo. Por favor incluya el número de
modelo, color y una descripción detallada de la pieza.
Departamento de Servicio a la Clientela No. 413
12345 Albert-Hudon Boulevard, Suite 100
LISTA DE ACCESORIOS
1 2 3
4 5 6
7 8 9
10 11
Ø4 * 30 mm
Ø6 * 25 mm
TORNILLO
3 PZAS
CLAVIJA DE MADERA
12 PZAS
Ø3.5 * 15 mm
Ø5/32" * 7/8"
TORNILLO
12 PZAS
PERNO
2 PZAS
MANIJA
1 PZA
Ø15 * 12 mm
Ø6 * 36 mm
Ø4 * 25 mm
SEGURO DE LEVA
GRANDE
18 PZAS
PERNO DE LEVA
PEQUEÑO
8 PZAS
TORNILLO
12 PZAS
Ø6 * 37 mm
Ø8 * 32 mm
Ø13 * 10 mm
PERNO DE LEVA GRANDE
18 PZAS
CLAVIJA DE MADERA
18 PZAS
SEGURO DE LEVA
PEQUEÑO
8 PZAS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

Dorel Home FA1011-7 Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues