iHome iBT81 Guide de démarrage rapide

Taper
Guide de démarrage rapide
USING THE VOICE CONTROL
FEATURE
NOTE: The unit must be powered on and
linked to an iOS or Android Bluetooth
device to use Voice Control. Press and
hold the Button for 2 seconds and wait
for beep to activate voice control with Siri
or Google Now.
Voice control requires an active internet connection on
connected Bluetooth device with iOS 10 and Android 4.1 and
later. When activated, the speaker microphone acts as an
extension of the microphone in your smartphone to
make/take calls, enable you to ask Siri®/Google Now™ to play
music and more.
» If there is no audio or light mode
detected after 15 minutes the unit will
auto power o to save battery life
iBT81 QSG
Size: 180 x 100 (mm)
Sept 25, 2017
material: 260gsm2 art card, 2C + 1C
PMS7467C
FRONT
QUICK START GUIDE
In the Box
» iBT81 speaker » charging cable
CHARGE UNIT
BEFORE USE
ABOUT 5 HOURS
Color Mode Button
Voice Control/
Speakerphone Button
Play/Pause Button
Charge via USB AC
adapter
(not included)
or other powered
USB port
USB Charging Cable
(included)
Power o/on Switch
Bluetooth button
iHome
iBT81
BLUETOOTH: PAIRING & PLAYING
» Make your Bluetooth device “discoverable”
» Power on speaker
» The first time the unit is powered on it will
enter auto-pairing mode.
» Select “iHome iBT81” on your device’s
Bluetooth menu to complete pairing.
» To manually pair, power on unit then
press and hold Bluetooth Button for 2 sec.
Select “iHome iBT81” to complete pairing.
» Press Play/Pause Button to play and
pause Bluetooth audio.
» To clear/reset Bluetooth, press and hold
Bluetooth Button for 10 sec.
Manual Pairing
Pairing the First Time
iHome
iBT81
2s
» Press the color mode button to
cycle through modes
SLOW FAST ONE COLOR PULSE OFF
LED STATUS INDICATOR (TOP OF UNIT)
Solid Red = charging
Flashing Red = low battery
Red LED o = fully charged
Flashing Blue = pairing
Contact Us: 1800288 2792
For warranty and full instructions
visit: www.ihome.com/support
COLOR CHANGING MODE
FCC Information
This device complies with Part 15 of the FCC Rules,
operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s
licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de
licence. Lexploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine
evaluation limits in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes
d'évaluation dans la section 2.5 de RSS 102 et la
conformité à l'exposition de RSS-102 rf, utilisateurs peut
obtenir l'information canadienne sur l'exposition et la
conformité de rf.
FCC ID: EMOIBT81
IC: 986B-IBT81
iBT81-09252017-A(EN) Printed in China
This device uses an internal non-replaceable rechargeable
lithium-ion battery that should last the lifetime of the device.
If you suspect your battery may be dead, try charging it for
an extended period of time and try resetting the unit. If this
fails, contact Customer Service at 1-800-288-2792.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void
the warranty and could cause injury and damage to your
device. To dispose of the unit, follow the instructions below:
Never dispose of used batteries/electronics with ordinary
solid wastes, since they contain toxic substances.
Always dispose of used batteries/electronics in accordance
with the prevailing community regulations.
Many electronics retailers now recycle batteries and other
electronic components at no charge
GENERAL BATTERY PRECAUTIONS
Never use or charge a battery if it appears to be leaking,
discolored, deformed, or in any way abnormal.
Never disassemble the unit or attempt to remove battery
as that could cause leakage of alkaline solution or other
electrolytic substances.
Avoid charging a rechargeable battery when the
temperature is not within 5°C - 35° C (41° - 95°
Fahrenheit).
Never expose a battery to any liquid.
Never expose a battery to excessive heat such as direct
sunlight or fire. Never use a battery pack in an unventilated
vehicle where excessive internal temperatures may be
encountered.
Always keep batteries out of the reach of infants and small
children.
Internal Rechargeable Lithium-ion Battery
Color Changing Rechargeable
Bluetooth Speaker
Model: iBT81
2s
» The speaker must be on and connected with
a paired Bluetooth device to recieve calls.
» Press the Voice Control/Speakerphone
Button to answer/end incoming calls.
Press and hold to ignore call.
USING SPEAKERPHONE
Answer/End Call
Ignore Call
TIP: On some iOS (Apple) devices,
you can view the iBT81 battery
status on your deviceʼs screen.
When device is paired and
connected, look for a vertical
battery icon next to the Bluetooth
icon on the upper right corner of the
deviceʼs screen.
  • Page 1 1

iHome iBT81 Guide de démarrage rapide

Taper
Guide de démarrage rapide

dans d''autres langues