Chief SKM24ASC Mode d'emploi

Catégorie
Supports de projecteur
Taper
Mode d'emploi
I N S T A L L A T I O N I N S T R U C T I O N S
Kiosk Stand/Counter Mount
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
SKM24ASC
SKM24ASC Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components stored within the mounting system does not
exceed 5 lbs (2.26 kg).
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions SKM24ASC
3
DIMENSIONS
DIMENSIONS: INCHES
[MILLIMETERS]
.19
4.8
CO SME T IC C O VER
SKM24ASC Installation Instructions
4
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Adjust
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
Remove
Quitar
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Optional
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Installation Instructions SKM24ASC
5
TOOLS REQUIRED FOR INSTALLATION
PARTS
#2
1/8" (included)
5/32" (security) (included)
M4 (included)
C (4)
M6 x 10mm
A (1)
[Kiosk bracket] B (1)
[Bracket cover]
D (2)
#10-24 x 3/8" E (2)
#10-24 x 3/8"
F (1)
1/8"
G (1)
5/32"(security)
H (1)
M4
SKM24ASC Installation Instructions
6
Assembly And Installation
Installing Kiosk to Kiosk Bracket
1. Loosely install four M6 x 10mm button head cap screws (C)
into holes on back of kiosk (not included). (See Figure 1)
2. Install kiosk to kiosk bracket (A) by hanging bracket onto
screws installed in Step 1. (See Figure 1)
3. Tighten screws to secure kiosk to bracket (A).
Figure 1
4. Install bracket cover (B) over kiosk bracket (A). (See Figure
2)
5. Use two #10-24 x 3/8" button head cap screws (E) or two
#10-24 x 1/4" security screws (D) to secure cover (B) to
kiosk bracket (A). (See Figure 3)
Figure 2
Figure 3
1
(C) x 4
(A)
kiosk
2
2
4
(B)
(A)
5
(E) or (D) x 2
(H)
Installation Instructions SKM24ASC
7
Device Storage
NOTE: The SKM24ASC can store any type of that fits in the
kiosk bracket and does not exceed the weight limit
when combined with the weight of the kiosk and
display. The slots are designed specifically for installing
Intel NUC™ devices. The following steps apply to
installing a NUC™ device.
1. Install two NUC™ screws (not included) into back of NUC™
(not included). (See Figure 5)
Figure 4
2. Hang NUC™ screws into keyholes on back of kiosk bracket.
(See Figure 5)
Figure 5
1
NUC™ screws x 2
NUC™ (back)
NUC™ (front)
2
2
screw keyholes
SKM24ASC Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
8800-003364 Rev00
2022 Legrand | AV
www.legrandav.com
05/2022
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chief SKM24ASC Mode d'emploi

Catégorie
Supports de projecteur
Taper
Mode d'emploi

dans d''autres langues