Chief FCA112 Guide d'installation

Catégorie
Mur
Taper
Guide d'installation
INSTALLATION INSTRUCTIONS
Fusion Universal CPU Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FCA112
FCA112 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installers responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8" (1.6cm).
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installers responsibility to make sure the combined weight of
all components located on the FCA112 does not exceed
15 lbs (6.8 kg).
WARNING: RISK OF INJURY TO PERSONS! Do not use
this mounting system to support video equipment such as
televisions or computer monitors.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions FCA112
3
DIMENSIONS
1.50
38.1
6.50
165.1
2.02
51.3
RIGHT ASSEMBLY
LEFT ASSEMBLY
TILT MOUNT AND DISPLAY IS TILTED)
ADJUSTABLE DEPTH BRACKETS
MAX DEPTH 1.63" [41.4]
(MAX DEPTH 2.00" [50.8] IF USED WITH
5.00
DISTANCE
FROM FUSION
MOUNTING RAILS
126.9
NOT INCLUDED
ACCESS PORTS
16.000
FCA112 POSSIBLE POSITIONS WHEN INSTALLED
ON THE
MEDIUM, LARGE AND XLARGE FUSION MOUNTS
OPTIONAL SIDE POSITIONS
FOR MEDIUM, LARGE AND
XLARGE FUSION MOUNTS
(MEDIUM SHOWN)
FCA112 POSSIBLE POSITIONS WHEN INSTALLED
ON
MEDIUM FUSION MOUNTS WITH FCA1S
COMPONENT DIMENSION LIMITS WHEN
INSTALLED IN MIDDLE OF UPPER BAR
MAX WIDTH
= STUD DISTANCE - 6.25"
MAX HEIGHT
= N/A
COMPONENT DIMENSION LIMITS WHEN
INSTALLED IN MIDDLE OF BOTTOM BAR
MAX WIDTH
= STUD DISTANCE - 2.50"
MAX HEIGHT
= 4.75"
COMPONENT DIMENSION LIMITS WHEN
INSTALLED IN MIDDLE OF LOWER BAR
MAX WIDTH
= STUD DISTANCE - 6.25"
MAX HEIGHT
= N/A
COMPONENT DIMENSION LIMITS WHEN
INSTALLED IN MIDDLE OF BOTTOM BAR
MAX WIDTH
= 6.00"
MAX HEIGHT
= 4.75"
FCA112 Installation Instructions
4
LEGEND
TOOLS REQUIRED FOR INSTALLATION
PARTS
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
#2
A (1)
B (1)
C (8)
[left bracket]
[right bracket]
[hook and loop square]
Installation Instructions FCA112
5
INSTALLATION
NOTE: The FCA112 may be used to support a surge adapter
or other components that don’t exceed the weight
capacity of the FCA112.
1. Put hook and loop squares (C) together so there are 4
squares of hook and loop.
2. Remove paper from one side of each of the four hook and
loop squares.
3. Attach hook and loop squares to the left and right brackets
(A and B). (See Figure 1)
Figure 1
4. Remove paper from hook and loop squares, lower and
press the surge adapter, or other component, against the
left and right brackets. (See Figure 2)
5. Rest the surge adapter on the inside legs of the brackets.
(See Figure 2)
Figure 2
6. Tighten the brackets against the surge adapter by
tightening the Phillips flat machine screws with Phillips
screwdriver. (See Figure 3)
Figure 3
7. Place the left and right brackets with the surge adapter onto
the wall mount.
NOTE: The brackets may be placed in several areas of the wall
mount. See the DIMENSIONS drawings for various
placement options.
(A)
(B)
3
(C) x 4
4
Inside
Legs
6
x 2
FCA112 Installation Instructions
6
8. Tighten the Phillips pan machine screws to complete
installation of the FCA112 bracket. (See Figure 4)
Figure 4
8
x 2
Installation Instructions FCA112
7
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
FCA112 Installation Instructions
Chief, a products division of
Milestone AV Technologies
8800-002722 Rev00
2015 Milestone AV Technologies
www.chiefmfg.com
04/15
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chief FCA112 Guide d'installation

Catégorie
Mur
Taper
Guide d'installation

dans d''autres langues