Lenco SBW-800BK Le manuel du propriétaire

Catégorie
Haut-parleurs de la barre de son
Taper
Le manuel du propriétaire
Model SBW-800
User manual - Bluetooth soundbar with wireless
subwoofer
Gebruiksaanwijzing - Bluetooth-soundbar met draadloze
subwoofer
Bedienungsanleitung - Bluetooth-Soundbar mit
Drahtlos-Subwoofer
Mode d’emploi - Barre de son Bluetooth avec caisson de
basse sans fil
Manual del usuario - Barra de sonido Bluetooth con
subwoofer inalámbrico
1
Index
English ..............................................................................................2
Nederlands ..................................................................................... 19
Deutsch........................................................................................... 38
Français .......................................................................................... 58
Español ........................................................................................... 77
Version: 1.0
2
English
SBW-800
CAUTION:
Usage of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
This unit should not be adjusted or repaired by anyone except qualified
service personnel.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any ventilation openings. When placing the
device on a shelf, leave 5 cm (2”) free space around the whole
device.
4. Install in accordance with the supplied user manual.
5. * Don’t step on or pinch the power adaptor. Be very careful,
particularly near the plugs and the cable’s exit point. Do not place
heavy items on the power adaptor, which may damage it. Keep the
entire device out of children’s reach! When playing with the power
cable, they can seriously injure themselves.
6. * Unplug this device during lightning storms or when unused for a
long period.
7. Keep the device away from heat sources such as radiators,
heaters, stoves, candles and other heat-generating products or
naked flame.
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb normal usage of this device. If
so, simply reset and restart the device following the instruction
3
manual. During file transmission, please handle with care and
operate in a static-free environment.
10. Warning! Never insert an object into the product through the
vents or openings. High voltage flows through the product and
inserting an object can cause electric shock and/or short circuit
internal parts. For the same reason, do not spill water or liquid on
the product.
11. Do not use in wet or moist areas such as bathrooms, steamy
kitchens or near swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and
checked several times before leaving the factory, it is still possible
that problems may occur, as with all electrical appliances. If you
notice smoke, an excessive build-up of heat or any other
unexpected phenomena, you should disconnect the plug from the
main power socket immediately.
14. This device must operate on a power source as specified on the
specification label. If you are not sure of the type of power supply
used in your home, consult your dealer or local power company.
15. * The socket outlet must be installed near the equipment and
must be easily accessible.
16. * Do not overload ac outlets or extension cords. Overloading can
cause fire or electric shock.
17. * Devices with class 1 construction should be connected to a main
socket outlet with a protective earthed connection.
18. * Devices with class 2 construction do not require a earthed
connection.
19. Keep away from rodents. Rodents enjoy biting on power cords.
20. * Always hold the plug when pulling it out of the main supply
socket. Do not pull the power cord. This can cause a short circuit.
4
21. Avoid placing the device on any surfaces that may be subject to
vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use solvents or
petrol based fluids. To remove severe stains, you may use a damp
cloth with dilute detergent.
23. The supplier is not responsible for damage or lost data caused by
malfunction, misuse, modification of the device or battery
replacement.
24. Do not interrupt the connection when the device is formatting or
transferring files. Otherwise, data may be corrupted or lost.
25. If the unit has USB playback function, the usb memory stick should
be plugged into the unit directly. Don’t use an usb extension cable
because it can cause interference resulting in failing of data.
26. The apparatus shall not be exposed to dripping or splashing and
make sure that no objects filled with liquids, such as vases, are
placed on or near the apparatus.
27. * To completely disconnect the power input, the mains plug of the
apparatus shall be disconnected from the mains, as the disconnect
device is the mains plug of apparatus.
28. If the unit works with battery, Battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
29. Attention should be drawn to the environmental aspects of
battery disposal.
30. The apparatus can only be used in moderate extremely cold or
climates warm environments should be avoided.
The rating label has been marked on the bottom or back panel of
the apparatus. This device is not intended for use by people
(including children) with physical, sensory or mental disabilities, or
a lack of experience and knowledge, unless they’re under
supervision or have received instructions about the correct use of
5
the device by the person who is responsible for their safety. This
product is intended for none professional use only and not for
commercial or industrial use.
31. Make sure the unit is adjusted to a stable position. Damage caused
by using this product in an unstable position or by failure to follow
any other warning or precaution contained within this user manual
will not be covered by warranty.
32. Never remove the casing of this apparatus.
33. Never place this apparatus on other electrical equipment.
34. Do not use or store this product in a place where it is subject to
direct sunlight, heat, excessive dust or vibration.
35. Do not allow children access to plastic bags.
36. Only use attachments/accessories specified by the manufacturer.
37. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as the power supply cord or the plug, when liquid has been spilled
or objects have fallen into the apparatus, when the apparatus has
been exposed to rain or moisture, does not operate normally, or
has been dropped.
38. * Do not use a damaged power cord or plug or a loose outlet.
Doing so may result in fire or electric shock.
39. Prolonged exposure to loud sounds from personal music players
may lead to temporary or permanent hearing loss.
INSTALLATION
Unpack all parts and remove protective material.
* Do not connect the unit to the mains before checking the mains
voltage and before all other connections have been made.
6
* These instructions are related only to products using power cable
or AC power adaptor.
Overview
Product
1: /SOURCE: Short press to power on, after power on short press
for function change, long press to turn off;
2: VOL+: Short or long press for volume up;
3: VOL-: Short or long press for volume down;
4: Bluetooth disconnect/pair: short press to disconnect BT device.
Long press for Bluetooth pairing mode.
7
5: TF/mSD Card slot
6: USB flashdrive connection
7: DC in
8: HDMI(ARC) IN
9: LINE IN
10: OPTICAL IN
11: AUX IN(Right)
12: AUX IN (Left)
Function indicator LED
1. Red light: The unit is powered off (standby).
2. White light: Soundbar is powered on
What’s in the box:
1* Soundbar
1* Subwoofer
2*Adaptor
1*User manual
1*Remote control
1*Wall mount brackets
8
Remote
1: : Short press to switch the unit on or off(standby).
2: TREBLE: Press to decrease the treble effect.
3: TREBLE+: Press to increase the treble effect.
4: VOL+: Short or long press to turn the volume up and Short press to
switch mute off if mute function is on.
5: VOL-: Short or long press to turn the volume down and Short press
to switch mute off, if mute function is on.
6: : Press to jump to previous song in Bluetooth/USB/TF mode and
Short press to switch mute off if mute function is on.
7: : Press to jump next song in Bluetooth/USB/TF mode and Short
press to switch mute off if mute function is on.
9
8: MUSIC: Press to select Music sound effect settings.
9: MOVIE: Press to select cinema sound effect settings.
Note: In Movie mode, Bass and Treble adjustments are not
working.
10: DIALOG: Press to select Speech sound effect setting.
11: BASS: Press to decrease the bass effect and Short press to switch
mute off if mute function is on.
12: BASS+: Press to increase the bass effect and Short press to switch
mute off, if mute function is on.
13: M: Press to switch mute function on or off/long press to change
Input source.
10
Operation
Remote Control:
Insert AA battery to the remote control to activate the Remote Control.
Note: The Remote Control works within a range of 6 meter.
11
Getting Started:
1: Make sure you have made all the necessary cable connections
before connecting the Soundbar to a wall outlet, when connected
to the wall outlet, the soundbar will enter the standby mode and
the power indicator wil light up red.
2: Make sure the subwoofer is connected to the power and turn the
button to “ON”
3: Short press /SOURCE on the unit or on the remote control
to turn on the soundbar. The power indicator will light up white
4: Press the source button on unit or remote control to choose the
desired input source.
Note: The Soundbar will enter the standby mode if there is no
active input signal for 15 minutes.
Pair with the subwoofer
The wireless subwoofer automatically connects with the soundbar
when both units are powered on. If the subwoofer is on and
connected, the red LED will be lit continuously.
Note: For troubleshooting connection problems, refer to the trouble
shooting section
Bluetooth Pairing:
1: Short press the Source button on the Soundbar and choose the
Bluetooth input (voice “Bluetooth”).
2: The indicator light will be flashing slowly to indicate it is searching
for a Bluetooth device.
3: Long press the Pair button on the side of the unit. The power
indicator will start to flash quickly.
12
4: Turn on the Bluetooth function on your smart device and activate
Bluetooth device scanning.
5: Select “Lenco SBW-800” from the list of found devices.
6: if asked, enter the password “0000” and press OK.
7: When successfully paired with your device, the indicator light will
be lit continuously. You can use the remote control to control
music playback of the connected Bluetooth device.
(The operation range for the Bluetooth connection is ~10 meters)
Note: if a mobile phone, on which you are playing music receives a
call, the music will stop playing. When the call is ended, the
devices are connected to each other again and playback will
resume.
Removing a connected Bluetooth device
Press and hold the Bluetooth button (nr 3 in below picture) on the
soundbar for 3 seconds to disconnect the active Bluetooth device.
13
AUX Source:
1: Ensure that the soundbar is connected to the TV or other audio
device via an AUX cable.
2: Long press the M button on the Remote control until you hear
the voice “Auxillary”. You also can short press the source button
on the soundbar to choose the AUX source.
OPTICAL IN Source:
1. Ensure that the soundbar is connected to the TV or other audio
device via an Optical cable.
2. Long press the M button on the remote control various times
until you hear the voice “optical”. You can also short press the
source button on the soundbar to choose the Optical source.
TV OPTICAL
LINE IN Source:
1: Ensure that the soundbar is connected to the TV or other audio
device via an audio cable (3.5mm jack).
2: Long press the ”M button on the remote control various times
until you hear the voice “Line in”. You can also short press the
source button on the soundbar to choose the LINE IN source.
14
HDMI Source
Ensure that the soundbar is connected to the TV or other audio
device via HDMI cable.
Long press the ”M button on the remote control various times
until you hear the voice “HDMI”. You can also short press the
source button on the soundbar to choose the HDMI source.
Note: If your TV is equipped with HDMI (ARC), the soundbar can
synchronize the volume with your TV.
TF CARD (Micro SD card)
Short press the Button to turn on the soundbar, Insert the TF card
into the TF card slot. The soundbar will start to play the music.
Short press to play/pause the music. Short press or on
the remote control to play the previous/next song.
You can use MicroSD cards of max 128GB formatted in FAT32 format.
The soundbar can play MP3, WAV and WMA files
TV HDMI (ABC)
15
USB flashdrive play
1. Short press the Button to turn on the soundbar, insert a USB
flahsdrive into the USB connection. The soundbar will start playing
the music from the USB. Short press to play/pause the music.
Short press or to play the previous/next song.
You can use USB flashdrives of max 128GB formatted in FAT32 format
The soundbar can play MP3, WAV and WMA files.
Note: The usb connection is not intended for charging or connecting
other devices.
Trouble shooting
Problem
Solution
A source device
cannot connect
with the soundbar
You have not enabled the Bluetooth function of
the source device. See the user manual of the
source device on how to enable the Bluetooth
function.
The soundbar is
already connected
with another
Bluetooth device.
Press and hold Bluetooth pairing button on the
soundbar to disconnect the connected source
device, then try pairing again.
Quality of audio
play from a
connected
Bluetooth device
is poor
The Bluetooth reception is poor. Move the
source device closer to the soundbar or remove
any obstacles between the source device and the
soundbar.
The connected
Bluetooth device
connects and
disconnects
constantly.
The Bluetooth reception is poor. Move the
source device closer to the soundbar or remove
any obstacles between the source device and the
soundbar.
16
The remote
control does not
work.
Check if the batteries are drained and replace
with new batteries or the distance between the
remote control and the main unit is too far.
Move it closer to the unit.
Subwoofer not
working
Re-pair the soundbar with the subwoofer:
Turn on the soundbar then press and hold both
the Volume + and Volume buttons and turn on
the subwoofer, the red LED on the Subwoofer
will flash 4 times. Unplug the AC adaptor from
the soundbar, wait a few seconds and then
replug the AC adapter. Keep the powerswitch of
the subwoofer in the ‘on’ position and turn on
the soundbar again to complete the re-pairing of
the soundbar and subwoofer.
Specifications
Product name
SBW-800BK
Output power
20W*2+30w
AC/DC adaptor
100-240V~50/60Hz
Speaker frequency
50Hz-15KHz
Bluetooth version
5.0, A2DP, AVRCP
Bluetooth range
Up to 10m
Dimensions of soundbar
810 x 92 x 93mm (WxHxD)
Dimensions of subwoofer
165 x 240 x 298mm (WxHxD)
Weight of soundbar
1,44 kgs
Weight of subwoofer
2,17 kgs
Frequency range
500 980Mhz
This product specifications and design are subject to
change without notice!
17
Guarantee
Lenco offers service and warranty in accordance to European law,
which means that in case of repairs (both during and after the
warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to
Lenco directly.
Important note: If this unit is opened or accessed by a non-official
service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional
use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All
items described in this guide for illustration purposes only and may not
apply to particular situation. No legal right or entitlements may be
obtained from the description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery
should not be disposed of as general household waste in Europe. To
ensure the correct waste treatment of the product and battery, please
dispose them in accordance to any applicable local laws of requirement
for disposal of electrical equipment or batteries. In so doing, you will
18
help to conserve natural resources and improve standards of
environmental protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The
Netherlands, declares that this product is in compliance with the
essential EU directive requirements.
The declaration of conformity may be consulted via
techdoc@commaxxgroup.com
Service
For more information and helpdesk support, please visit
www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.
19
Nederlands
SBW-800
LET OP:
Gebruik van bedieningen of afstellingen of uitvoer van procedures
anders dan gespecificeerd in deze documentatie kan leiden tot
blootstelling aan schadelijke straling.
Dit apparaat dient uitsluitend te worden aangepast of gerepareerd
door gekwalificeerd onderhoudspersoneel.
VOORZORGSMAATREGELEN VOOR GEBRUIK
ONTHOUD DE VOLGENDE INSTRUCTIES:
1. Gebruik dit apparaat niet in de buurt van water.
2. Reinig het uitsluitend met een licht vochtige doek.
3. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het
apparaat op een schap plaatst, dient u 5 cm (2”) vrije ruimte
rondom het gehele apparaat te behouden.
4. Installeer het product volgens de meegeleverde
gebruikershandleiding.
5. * Nooit op de stroomadapter stappen of deze indrukken. Wees
voornamelijk voorzichtig in de buurt van de stekkers en het punt
waar de kabel uit het apparaat komt. Plaats geen zware
voorwerpen op de stroomadapter, om beschadiging ervan te
voorkomen. Houd het gehele apparaat buiten bereik van kinderen!
Wanneer kinderen met de voedingskabel spelen, kunnen zij ernstig
letsel oplopen.
6. * Haal de stekker uit het stopcontact tijdens onweer of wanneer u
deze langere tijd niet gebruikt.
7. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren,
verwarmingen, kachels, kaarsen en andere hittegenererende
producten of open vuur.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

Lenco SBW-800BK Le manuel du propriétaire

Catégorie
Haut-parleurs de la barre de son
Taper
Le manuel du propriétaire