Lenco SBW-800BK Le manuel du propriétaire

Model SBW-800

User manual - Bluetooth soundbar with wireless

subwoofer

Gebruiksaanwijzing - Bluetooth-soundbar met draadloze

subwoofer

Bedienungsanleitung - Bluetooth-Soundbar mit

Drahtlos-Subwoofer

Mode d’emploi - Barre de son Bluetooth avec caisson de

basse sans fil

Manual del usuario - Barra de sonido Bluetooth con

subwoofer inalámbrico

1

Index

English ..............................................................................................2

Nederlands ..................................................................................... 19

Deutsch........................................................................................... 38

Français .......................................................................................... 58

Español ........................................................................................... 77

Version: 1.0

2

English

SBW-800

CAUTION:

Usage of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous radiation

exposure.

This unit should not be adjusted or repaired by anyone except qualified

service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the

device on a shelf, leave 5 cm (2”) free space around the whole

device.

4. Install in accordance with the supplied user manual.

5. * Don’t step on or pinch the power adaptor. Be very careful,

particularly near the plugs and the cable’s exit point. Do not place

heavy items on the power adaptor, which may damage it. Keep the

entire device out of children’s reach! When playing with the power

cable, they can seriously injure themselves.

6. * Unplug this device during lightning storms or when unused for a

long period.

7. Keep the device away from heat sources such as radiators,

heaters, stoves, candles and other heat-generating products or

naked flame.

8. Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If

so, simply reset and restart the device following the instruction

3

manual. During file transmission, please handle with care and

operate in a static-free environment.

10. Warning! Never insert an object into the product through the

vents or openings. High voltage flows through the product and

inserting an object can cause electric shock and/or short circuit

internal parts. For the same reason, do not spill water or liquid on

the product.

11. Do not use in wet or moist areas such as bathrooms, steamy

kitchens or near swimming pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and

checked several times before leaving the factory, it is still possible

that problems may occur, as with all electrical appliances. If you

notice smoke, an excessive build-up of heat or any other

unexpected phenomena, you should disconnect the plug from the

main power socket immediately.

14. This device must operate on a power source as specified on the

specification label. If you are not sure of the type of power supply

used in your home, consult your dealer or local power company.

15. * The socket outlet must be installed near the equipment and

must be easily accessible.

16. * Do not overload ac outlets or extension cords. Overloading can

cause fire or electric shock.

17. * Devices with class 1 construction should be connected to a main

socket outlet with a protective earthed connection.

18. * Devices with class 2 construction do not require a earthed

connection.

19. Keep away from rodents. Rodents enjoy biting on power cords.

20. * Always hold the plug when pulling it out of the main supply

socket. Do not pull the power cord. This can cause a short circuit.

4

21. Avoid placing the device on any surfaces that may be subject to

vibrations or shocks.

22. To clean the device, use a soft dry cloth. Do not use solvents or

petrol based fluids. To remove severe stains, you may use a damp

cloth with dilute detergent.

23. The supplier is not responsible for damage or lost data caused by

malfunction, misuse, modification of the device or battery

replacement.

24. Do not interrupt the connection when the device is formatting or

transferring files. Otherwise, data may be corrupted or lost.

25. If the unit has USB playback function, the usb memory stick should

be plugged into the unit directly. Don’t use an usb extension cable

because it can cause interference resulting in failing of data.

26. The apparatus shall not be exposed to dripping or splashing and

make sure that no objects filled with liquids, such as vases, are

placed on or near the apparatus.

27. * To completely disconnect the power input, the mains plug of the

apparatus shall be disconnected from the mains, as the disconnect

device is the mains plug of apparatus.

28. If the unit works with battery, Battery shall not be exposed to

excessive heat such as sunshine, fire or the like.

29. Attention should be drawn to the environmental aspects of

battery disposal.

30. The apparatus can only be used in moderate extremely cold or

climates warm environments should be avoided.

The rating label has been marked on the bottom or back panel of

the apparatus. This device is not intended for use by people

(including children) with physical, sensory or mental disabilities, or

a lack of experience and knowledge, unless they’re under

supervision or have received instructions about the correct use of

5

the device by the person who is responsible for their safety. This

product is intended for none professional use only and not for

commercial or industrial use.

31. Make sure the unit is adjusted to a stable position. Damage caused

by using this product in an unstable position or by failure to follow

any other warning or precaution contained within this user manual

will not be covered by warranty.

32. Never remove the casing of this apparatus.

33. Never place this apparatus on other electrical equipment.

34. Do not use or store this product in a place where it is subject to

direct sunlight, heat, excessive dust or vibration.

35. Do not allow children access to plastic bags.

36. Only use attachments/accessories specified by the manufacturer.

37. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as the power supply cord or the plug, when liquid has been spilled

or objects have fallen into the apparatus, when the apparatus has

been exposed to rain or moisture, does not operate normally, or

has been dropped.

38. * Do not use a damaged power cord or plug or a loose outlet.

Doing so may result in fire or electric shock.

39. Prolonged exposure to loud sounds from personal music players

may lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.

• * Do not connect the unit to the mains before checking the mains

voltage and before all other connections have been made.

6

* These instructions are related only to products using power cable

or AC power adaptor.

Overview

Product

1: /SOURCE: Short press to power on, after power on short press

for function change, long press to turn off;

2: VOL+: Short or long press for volume up;

3: VOL-: Short or long press for volume down;

4: Bluetooth disconnect/pair: short press to disconnect BT device.

Long press for Bluetooth pairing mode.

7

5: TF/mSD Card slot

6: USB flashdrive connection

7: DC in

8: HDMI(ARC) IN

9: LINE IN

10: OPTICAL IN

11: AUX IN(Right)

12: AUX IN (Left)

Function indicator LED

1. Red light: The unit is powered off (standby).

2. White light: Soundbar is powered on

What’s in the box:

● 1* Soundbar

● 1* Subwoofer

● 2*Adaptor

● 1*User manual

● 1*Remote control

● 1*Wall mount brackets

8

Remote

1: : Short press to switch the unit on or off(standby).

2: TREBLE–: Press to decrease the treble effect.

3: TREBLE+: Press to increase the treble effect.

4: VOL+: Short or long press to turn the volume up and Short press to

switch mute off if mute function is on.

5: VOL-: Short or long press to turn the volume down and Short press

to switch mute off, if mute function is on.

6: : Press to jump to previous song in Bluetooth/USB/TF mode and

Short press to switch mute off if mute function is on.

7: : Press to jump next song in Bluetooth/USB/TF mode and Short

press to switch mute off if mute function is on.

9

8: MUSIC: Press to select Music sound effect settings.

9: MOVIE: Press to select cinema sound effect settings.

Note: In Movie mode, Bass and Treble adjustments are not

working.

10: DIALOG: Press to select Speech sound effect setting.

11: BASS–: Press to decrease the bass effect and Short press to switch

mute off if mute function is on.

12: BASS+: Press to increase the bass effect and Short press to switch

mute off, if mute function is on.

13: M: Press to switch mute function on or off/long press to change

Input source.

10

Operation

Remote Control:

Insert AA battery to the remote control to activate the Remote Control.

Note: The Remote Control works within a range of 6 meter.

11

Getting Started:

1: Make sure you have made all the necessary cable connections

before connecting the Soundbar to a wall outlet, when connected

to the wall outlet, the soundbar will enter the standby mode and

the power indicator wil light up red.

2: Make sure the subwoofer is connected to the power and turn the

button to “ON”

3: Short press /SOURCE on the unit or on the remote control

to turn on the soundbar. The power indicator will light up white

4: Press the source button on unit or remote control to choose the

desired input source.

Note: The Soundbar will enter the standby mode if there is no

active input signal for 15 minutes.

Pair with the subwoofer

The wireless subwoofer automatically connects with the soundbar

when both units are powered on. If the subwoofer is on and

connected, the red LED will be lit continuously.

Note: For troubleshooting connection problems, refer to the trouble

shooting section

Bluetooth Pairing:

1: Short press the Source button on the Soundbar and choose the

Bluetooth input (voice “Bluetooth”).

2: The indicator light will be flashing slowly to indicate it is searching

for a Bluetooth device.

3: Long press the Pair button on the side of the unit. The power

indicator will start to flash quickly.

12

4: Turn on the Bluetooth function on your smart device and activate

Bluetooth device scanning.

5: Select “Lenco SBW-800” from the list of found devices.

6: if asked, enter the password “0000” and press OK.

7: When successfully paired with your device, the indicator light will

be lit continuously. You can use the remote control to control

music playback of the connected Bluetooth device.

(The operation range for the Bluetooth connection is ~10 meters)

Note: if a mobile phone, on which you are playing music receives a

call, the music will stop playing. When the call is ended, the

devices are connected to each other again and playback will

resume.

Removing a connected Bluetooth device

Press and hold the Bluetooth button (nr 3 in below picture) on the

soundbar for 3 seconds to disconnect the active Bluetooth device.

13

AUX Source:

1: Ensure that the soundbar is connected to the TV or other audio

device via an AUX cable.

2: Long press the “M” button on the Remote control until you hear

the voice “Auxillary”. You also can short press the source button

on the soundbar to choose the AUX source.

OPTICAL IN Source:

1. Ensure that the soundbar is connected to the TV or other audio

device via an Optical cable.

2. Long press the ”M” button on the remote control various times

until you hear the voice “optical”. You can also short press the

source button on the soundbar to choose the Optical source.

TV OPTICAL

LINE IN Source:

1: Ensure that the soundbar is connected to the TV or other audio

device via an audio cable (3.5mm jack).

2: Long press the ”M” button on the remote control various times

until you hear the voice “Line in”. You can also short press the

source button on the soundbar to choose the LINE IN source.

14

HDMI Source

Ensure that the soundbar is connected to the TV or other audio

device via HDMI cable.

Long press the ”M” button on the remote control various times

until you hear the voice “HDMI”. You can also short press the

source button on the soundbar to choose the HDMI source.

Note: If your TV is equipped with HDMI (ARC), the soundbar can

synchronize the volume with your TV.

TF CARD (Micro SD card)

Short press the Button to turn on the soundbar, Insert the TF card

into the TF card slot. The soundbar will start to play the music.

Short press to play/pause the music. Short press or on

the remote control to play the previous/next song.

You can use MicroSD cards of max 128GB formatted in FAT32 format.

The soundbar can play MP3, WAV and WMA files

TV HDMI (ABC)

15

USB flashdrive play

1. Short press the Button to turn on the soundbar, insert a USB

flahsdrive into the USB connection. The soundbar will start playing

the music from the USB. Short press to play/pause the music.

Short press or to play the previous/next song.

You can use USB flashdrives of max 128GB formatted in FAT32 format

The soundbar can play MP3, WAV and WMA files.

Note: The usb connection is not intended for charging or connecting

other devices.

Trouble shooting

Problem

Solution

A source device

cannot connect

with the soundbar

You have not enabled the Bluetooth function of

the source device. See the user manual of the

source device on how to enable the Bluetooth

function.

The soundbar is

already connected

with another

Bluetooth device.

Press and hold Bluetooth pairing button on the

soundbar to disconnect the connected source

device, then try pairing again.

Quality of audio

play from a

connected

Bluetooth device

is poor

The Bluetooth reception is poor. Move the

source device closer to the soundbar or remove

any obstacles between the source device and the

soundbar.

The connected

Bluetooth device

connects and

disconnects

constantly.

The Bluetooth reception is poor. Move the

source device closer to the soundbar or remove

any obstacles between the source device and the

soundbar.

16

The remote

control does not

work.

Check if the batteries are drained and replace

with new batteries or the distance between the

remote control and the main unit is too far.

Move it closer to the unit.

Subwoofer not

working

Re-pair the soundbar with the subwoofer:

Turn on the soundbar then press and hold both

the Volume + and Volume – buttons and turn on

the subwoofer, the red LED on the Subwoofer

will flash 4 times. Unplug the AC adaptor from

the soundbar, wait a few seconds and then

replug the AC adapter. Keep the powerswitch of

the subwoofer in the ‘on’ position and turn on

the soundbar again to complete the re-pairing of

the soundbar and subwoofer.

Specifications

Product name

SBW-800BK

Output power

20W*2+30w

AC/DC adaptor

100-240V~50/60Hz

Speaker frequency

50Hz-15KHz

Bluetooth version

5.0, A2DP, AVRCP

Bluetooth range

Up to 10m

Dimensions of soundbar

810 x 92 x 93mm (WxHxD)

Dimensions of subwoofer

165 x 240 x 298mm (WxHxD)

Weight of soundbar

1,44 kgs

Weight of subwoofer

2,17 kgs

Frequency range

500 – 980Mhz

This product specifications and design are subject to

change without notice!

17

Guarantee

Lenco offers service and warranty in accordance to European law,

which means that in case of repairs (both during and after the

warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to

Lenco directly.

Important note: If this unit is opened or accessed by a non-official

service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional

use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly.

Therefore some of the instruction, specifications and pictures in this

documentation may differ slightly from your particular situation. All

items described in this guide for illustration purposes only and may not

apply to particular situation. No legal right or entitlements may be

obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery

should not be disposed of as general household waste in Europe. To

ensure the correct waste treatment of the product and battery, please

dispose them in accordance to any applicable local laws of requirement

for disposal of electrical equipment or batteries. In so doing, you will

18

help to conserve natural resources and improve standards of

environmental protection in treatment and disposal of electrical waste

(Waste Electrical and Electronic Equipment Directive).

CE Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The

Netherlands, declares that this product is in compliance with the

essential EU directive requirements.

The declaration of conformity may be consulted via

techdoc@commaxxgroup.com

Service

For more information and helpdesk support, please visit

www.lenco.com

Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

19

Nederlands

SBW-800

LET OP:

Gebruik van bedieningen of afstellingen of uitvoer van procedures

anders dan gespecificeerd in deze documentatie kan leiden tot

blootstelling aan schadelijke straling.

Dit apparaat dient uitsluitend te worden aangepast of gerepareerd

door gekwalificeerd onderhoudspersoneel.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1. Gebruik dit apparaat niet in de buurt van water.

2. Reinig het uitsluitend met een licht vochtige doek.

3. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het

apparaat op een schap plaatst, dient u 5 cm (2”) vrije ruimte

rondom het gehele apparaat te behouden.

4. Installeer het product volgens de meegeleverde

gebruikershandleiding.

5. * Nooit op de stroomadapter stappen of deze indrukken. Wees

voornamelijk voorzichtig in de buurt van de stekkers en het punt

waar de kabel uit het apparaat komt. Plaats geen zware

voorwerpen op de stroomadapter, om beschadiging ervan te

voorkomen. Houd het gehele apparaat buiten bereik van kinderen!

Wanneer kinderen met de voedingskabel spelen, kunnen zij ernstig

letsel oplopen.

6. * Haal de stekker uit het stopcontact tijdens onweer of wanneer u

deze langere tijd niet gebruikt.

7. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren,

verwarmingen, kachels, kaarsen en andere hittegenererende

producten of open vuur.

La page est en cours de chargement...

Lenco SBW-800BK Le manuel du propriétaire

Lenco SBW-800BK Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents