Honeywell VisionPRO TH8000 Series Touchscreen Programmable Thermostat Manuel utilisateur

Operating Manual

VisionPRO® TH8000 Series

Touchscreen Programmable Thermostat

69-1894EFS-03

firealarmresources.com

69-1894EFS—03

ENGLISH

Read and save these instructions.

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

® U.S. Registered Trademark.

US Patent No. 6595430, D509151 and other patents pending.

BE CAREFUL! Never use sharp instruments, such as a pencil

or pen, to press touchscreen keys. To prevent damage to the

thermostat, always press keys with your fingertip.

This thermostat contains a Lithium battery which may contain Perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

This manual covers the following models

TH8110U : For 1 Heat/1 Cool systems

TH8320U: For up to 3 Heat/2 Cool systems

TH8321U: For up to 3 Heat/2 Cool systems with dehumidification

(Pull thermostat from wallplate and turn over to find model number)

M29343

firealarmresources.com

169-1894EFS—03

ENGLISH

About your new thermostat

Thermostat features .............................. 2

Programming at a glance ..................... 3

Quick reference to controls .................. 4

Quick reference to status display ........ 5

Programming & Operation

Clock setting.......................................... 6

Fan setting ............................................. 7

System setting ....................................... 8

Using program schedules ..................... 9

Program schedule overrides .............. 12

Vacation hold ....................................... 14

Special features ................................... 15

Screen lock .......................................... 16

Screen cleaning ................................... 17

Humidity display & control .................. 18

Appendices

Battery replacement ............................ 20

Advanced functions ............................ 21

In case of difficulty .............................. 26

Optional remote sensors .................... 28

Limited warranty .................................. 29

This thermostat is ready to go!

Your new thermostat is pre-

programmed and ready to go.

See page 3 to check settings.

Table of contents

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not oper-

ate cooling system when outdoor

temperature is below 50˚F (10˚C).

VisionPRO® TH8000 Series

firealarmresources.com

Operating Manual

2

About your new thermostat

69-1894EFS—03

ENGLISH

Congratulations! You’ve just purchased the world’s most advanced, easy-to-use ther-

mostat. It has been designed to give you many years of reliable service and touch-

screen climate control.

Features

• 7-day program schedules maximize comfort and economy.

• Armchair programming: Just pull thermostat from the wall to set schedules.

• Energy-saving settings for maximum cost savings.

• One-touch temp control overrides program schedule at any time.

• Precise comfort control keeps temperature within 1°F of the level you set.

• Change/check reminders let you know when to service or replace filters,

batteries and other critical components.

• Large touchscreen display with backlight is easy to read—even in the dark.

• Select models display and control summer humidity.

• Select models accommodate optional outdoor or indoor remote sensors.

firealarmresources.com

VisionPRO® TH8000 Series

3

About your new thermostat

69-1894EFS—03

ENGLISH

Your new thermostat is pre-programmed and ready to go. Just set the time and day.

Then check the settings below and change if needed:

1. Set clock ........................................................................................................See page 6

2. Select fan setting: Preset to Auto ..............................................................See page 7

3. Select system setting: Preset to Heat ......................................................See page 8

4. Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm) .......................................................................See pages 10-13

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,

and manually adjust the temperature (see pages 12-14).

This thermostat is ready to go!

firealarmresources.com

Operating Manual

4

69-1894EFS—03

ENGLISH

SCHED HOLD CLOCK SCREEN MORE

MON TUE WED THU FRI SAT SUN

AM

FAN

AUTO

SYSTEM

HEAT

Following

Schedule

Inside Set To

OK TO PICK MULTIPLE DAYS

70

6:01

70

M29344

Press day(s) to set program schedule (see page 11)

Press to select fan

operation (see page 7)

Press to select system

type (see page 8)

Press to set program

schedule (see page 11)

Press to adjust

temperature settings

(see pages 11-14)

Press for more options

(select models only)

Press to override

program schedule

(see pages 12-14)

Press to set clock

(see page 6)

Press to lock keypad for 30

seconds to clean screen

(see page 17)

Quick reference to controls

firealarmresources.com

VisionPRO® TH8000 Series

569-1894EFS—03

ENGLISH

SCHEDHOLD CLOCKSCREEN MORE

WED

AM

FAN

AUTO

SYSTEM

HEAT

Following

Schedule

Inside Set To

Recovery

70

6:01

70

M29345

Current inside temperature Current day of week Temperature setting

Program schedule on

(does not display

when off)

Fan setting

Other display messages:

• Cool On: Cooling system is activated

• Heat On: Heating system is activated

• Aux Heat On: Auxiliary heating system is activated

Quick reference to status display

System setting

Current time

Adaptive Intelligent

Recovery in effect

(see page 15)

firealarmresources.com

Operating Manual

6

69-1894EFS—03

ENGLISH

DONE CANCEL

AM

6:02

M29347

SCHED HOLD CLOCK SCREEN MORE

AM

6:01

M29346

To set the current time display, press CLOCK,

then press s or t to adjust the time. Press

and hold s or t to advance the time more

quickly.

Press DONE to save & exit (or press CANCEL to

exit without changing the time).

Note: The real-time clock should never require

adjustment since it automatically updates for

daylight savings time, and stores all date/time

information.

Note: To change the current week day display, see

page 22.

Press CLOCK

Adjust time, then press DONE

Clock setting

firealarmresources.com

VisionPRO® TH8000 Series

769-1894EFS—03

ENGLISH

SCHEDHOLDCLOCK SCREEN MORE

WED

AM

SYSTEM

HEAT

Following

Schedule

Inside Set To

70

6:01

70

FAN

AUTO

M29348

Press FAN to select fan operation, then press

DONE.

• On: Fan is always on.

• Auto: Fan runs only when the heating or

cooling system is on.

• Circ: Fan runs randomly, about 35% of the

time, not counting any run time with the

heating or cooling system.

You can press FAN to override the fan settings

you’ve programmed for different time periods

(see page 11). If you select On or Circ, the

setting you select will remain active until you

press FAN again to select Auto (see page 27

for more information).

Press FAN

Fan setting

Note: If a fan schedule is programmed,

“Auto” will run the fan schedule.

firealarmresources.com

Operating Manual

8

69-1894EFS—03

ENGLISH

Press the SYSTEM button to select, then press

DONE.

• Heat: Thermostat controls only the

heating system.

• Cool: Thermostat controls only the

cooling system.

• Off: Heating and cooling systems are off.

• Auto: Thermostat automatically selects

heating or cooling depending on the

indoor temperature.**

• Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out.**

** Select models only

System setting

SCHED HOLD CLOCKSCREEN MORE

WED

AM

Following

Schedule

Inside Set To

70

6:01

70

FAN

AUTO

SYSTEM

HEAT

M29349

firealarmresources.com

VisionPRO® TH8000 Series

969-1894EFS—03

ENGLISH

Save money by setting program schedules

It’s easy to program your system for maximum energy savings. You can program four

time periods each day, with different settings for weekdays and weekends.

Set to the time you awaken and the temperature you want

during the morning, until you leave for the day.

Set to the time you leave home and the temperature you

want while you are away (usually an energy-saving level).

Set to the time you return home and the temperature you

want during the evening, until bedtime.

Set to the time you go to bed and the temperature you want

overnight (usually an energy-saving level).

WAKE

6:00 am

70 °

LEAVE

8:00 am

62 °

RETURN

6:00 pm

70 °

SLEEP

10:00 pm

62 °

firealarmresources.com

Operating Manual

10

69-1894EFS—03

ENGLISH

This thermostat is pre-set with energy-saving program settings. We recommend these

settings, since they can reduce your heating/cooling expenses by as much as 33%.

(See next page to adjust times and temperatures of each time period.)

Wake

(6:00 am)

Leave

(8:00 am)

Return

(6:00 pm)

Sleep

(10:00 pm)

Cool (Mon-Fri)Heat (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)

70 °78 °70 °78 °

62 °85 °62 °

[Or cancel period]

85 °

[Or cancel period]

70 °78 °70 °

[Or cancel period]

78 °

[Or cancel period]

62 °82 °62 °82 °

Energy-saving settings for maximum cost savings

firealarmresources.com

VisionPRO® TH8000 Series

11 69-1894EFS—03

ENGLISH

SCHED HOLD CLOCKSCREEN MORE

M29350

DONE WAKE LEAVERETURN SLEEPEDIT CANCEL

M29351

DONE WAKE LEAVERETURN SLEEP CANCEL

MON TUE WED THU FRI SATSUN

AM

CANCEL

PERIOD

HEAT

COOL

OK TO PICK MULTIPLE DAYS

70

6:00 78

FAN

AUTO

M29352

To adjust program schedules

1. Press SCHED, then EDIT.

2. Press day buttons (MON-SUN) to select

day(s).

3. Press s or t to set Wake time for selected

day(s).

4. Press s or t to set Heat and Cool

temperature for this time period.

5. Press other time periods (LEAVE, RETURN,

SLEEP) to set time and temperatures for

each.

6. Press DONE to save & exit (or press CANCEL

to exit without saving changes).

Note: You can press CANCEL PERIOD to eliminate any

unwanted time period.

Note: Press FAN to customize fan settings for any

time period (see page 7).

Set time for program

period to start

Press EDIT

Select day(s) Set heat/cool levels

Press SCHED

firealarmresources.com

Operating Manual

12

69-1894EFS—03

ENGLISH

Heat On

SCHEDHOLDCLOCK SCREEN MORE

CANCEL

WED

Inside

Hold Temperature

Until

Set To

73

AM

8:00

70

FAN

AUTO

SYSTEM

HEAT

M29353

Program schedule override (temporary)

Press s or t to immediately adjust the tem-

perature. This will temporarily override the

temperature setting for the current time period.

The new temperature will be maintained only

until the time you set. When the timer expires,

the program schedule will resume and set the

temperature to the level you’ve programmed

for the current time period.

To cancel the temporary setting at any time,

press CANCEL (or SCHED). The program schedule

will resume.

Adjust temperature

Press to set timer

Press CANCEL (or SCHED) to

resume program schedule

firealarmresources.com

VisionPRO® TH8000 Series

13 69-1894EFS—03

ENGLISH

Heat On

SCHED HOLD CLOCKSCREEN MORE

CANCEL

WED

AM

Inside Set To

Permanent

Hold

73

8:00

70

FAN

AUTO

SYSTEM

HEAT

M29354

Program schedule override (permanent)

Press HOLD Adjust temperature Press HOLD to permanently adjust the

temperature. This will turn off the program

schedule.

Whatever temperature you set will be

maintained 24 hours a day until you manually

change it or press CANCEL (or SCHED) to cancel

“Hold” and resume the program schedule.

Press CANCEL (or SCHED) to

resume program schedule

firealarmresources.com

Operating Manual

14

69-1894EFS—03

ENGLISH

SCHEDHOLDCLOCK SCREEN MORE

CANCEL

AM

Inside

Hold Temperature

Until

Set To

55

6:00

70

FAN

AUTO

SYSTEM

HEAT

M29355

SCHED HOLD CLOCKSCREEN MORE

CANCEL

DAYS

Hold Temperature

Until

14

SYSTEM

HEAT

M29356

Vacation hold

This feature can suspend the program sched-

ule for extended periods of time.

Press s or t to set the temperature you want,

then press s or t to set the time of day you

want the schedule to resume when you return.

Press HOLD twice, then press s or t to select

the number of days.

Whatever temperature you set will be main-

tained 24 hours a day for the number of days

you select. After this number of days have

elapsed, the previously programmed schedule

will resume at the time you set.

If you return earlier than expected, press

CANCEL (or SCHED) to cancel “Hold” and resume

the program schedule.

1. Set temperature

2. Press to set time for

schedule to resume

3. Press HOLD twice

4. Press to select number of days

firealarmresources.com

VisionPRO® TH8000 Series

15 69-1894EFS—03

ENGLISH

Special features

Auto Changeover: When set to Auto, the thermostat automatically selects heating or

cooling depending on the indoor temperature.

Adaptive Intelligent Recovery: This feature allows the thermostat to “learn” how

long the furnace and air conditioner take to reach programmed temperature settings,

so the temperature is reached at the time you set. For example: Set the Wake time to

6 am, and the temperature to 70°. The heat will come on before 6 am, so the tempera-

ture is 70° by the time you wake at 6. The message “Recovery” is displayed when the

system is activated before a scheduled time period.

Compressor Protection: This feature forces the compressor to wait a few minutes

before restarting, to prevent equipment damage. During the wait time, the message

“Wait” is displayed on screen.

firealarmresources.com

Operating Manual

16

69-1894EFS—03

ENGLISH

M29357

SCHED HOLD CLOCK SCREEN MORE

WED

PM

Following

Schedule

Inside Set To

SCREEN LOCKED

70

6:00

70

FAN

AUTO

SYSTEM

HEAT

Screen lock

To prevent tampering, the screen can be par-

tially or fully locked.

When partially locked, the screen displays

SCREEN LOCKED for several seconds if a locked

key is pressed. To unlock the screen, press any

unlocked key while SCREEN LOCKED appears on

the screen.

When the screen is fully locked, no keys

function. To lock or unlock the screen, see

advanced function 0670 on page 25.

See advanced function

0670 (page 25) for

screen lock options

firealarmresources.com

VisionPRO® TH8000 Series

17 69-1894EFS—03

ENGLISH

SCHEDHOLDCLOCK SCREEN MORE

PM

6:00

M29358

OK TO

CLEAN

SCREEN

30

M29359

Screen cleaning

Press SCREEN to lock the screen for cleaning.

The screen will remain locked for 30 seconds

so you can clean the screen without changing

any settings.

After 30 seconds, press DONE to resume normal

operation, or press SCREEN again if you require

more time for cleaning.

Note: Do not spray any liquid directly on the

thermostat. Spray liquids onto a cloth, then use

the damp cloth to clean the screen. Use water or

household glass cleaner. Avoid abrasive cleansers.

Press SCREEN

Screen lock timer (30 seconds)

firealarmresources.com

Operating Manual

18

About your new thermostat

69-1894EFS—03

ENGLISH

SCHED HOLD CLOCK SCREEN MORE

WED

PM

FAN

AUTO

SYSTEM

HEAT

Following

Schedule

Inside Set To

Humidity

70

6:00

70

43

M29360

Humidity level display (select models)

Select models can display the current indoor

humidity level.

(If an optional outdoor sensor is installed,

the outdoor temperature is shown instead of

the humidity level. Press MORE to display the

humidity level.)

Indoor humidity level

firealarmresources.com

La page charge ...

Honeywell VisionPRO TH8000 Series Touchscreen Programmable Thermostat Manuel utilisateur

Honeywell VisionPRO TH8000 Series Touchscreen Programmable Thermostat Manuel utilisateur

dans d''autres langues