Miele 41AAO035USA Manuel utilisateur

en Operating Instructions Stick Vacuum Cleaner

fr Mode d'emploi Aspirateur-balai

M.-Nr. 10 081 730

HS07

2

en ....................................................................................................................... 5

fr ......................................................................................................................... 27

3

Only Miele FilterBags, filters and accessories with

the "Original Miele" logo can be used with this

vacuum. Only then can the suction power of the

vacuum cleaner reach its optimum potential creating

the best possible cleaning results.

USE OF NON-MIELE COMPONENTS MAY VOID

THE WARRANTY.

,

The use of FilterBags made of paper or a similar

material, or FilterBags with a cardboard retaining

plate can lead to serious damage to the vacuum

cleaner and may void the warranty, just as with the

use of FilterBags without the "Original Miele" logo.

The "Original Miele" Logo will appear on the

packaging or directly on the FilterBag.

Purchasing new FilterBags and filters

Original Miele FilterBags and filters can be purchased

from an authorized Miele vacuum dealer or by visiting the

Miele store at www.mieleusa.com.

en - Contents

4

IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5

Appliance description ......................................................................................... 10

Caring for the environment ................................................................................ 12

References to illustrations.................................................................................. 13

Preparing for use................................................................................................. 13

Use........................................................................................................................ 14

Setting down and storing the vacuum cleaner................................................. 15

Maintenance ........................................................................................................ 15

Purchasing new FilterBags and filters ................................................................... 15

Ordering the correct FilterBags and filters ............................................................ 15

When to change the FilterBag .............................................................................. 16

How the FilterBag change indicator works ........................................................... 16

How to replace the FilterBag ................................................................................ 16

When to change the motor protection filter........................................................... 17

How to change the motor protection filter ........................................................... 17

When to replace the exhaust filter......................................................................... 17

How to replace the AirClean exhaust filter ........................................................... 17

How to replace an Active AirClean or an AirClean Plus exhaust filter .................. 17

Replacing one type of exhaust filter with another................................................. 18

When to change the thread catchers .................................................................... 18

How to replace the thread lifters .......................................................................... 18

Cleaning the roller on the AllTeQ floorhead .......................................................... 18

Cleaning and care ............................................................................................... 18

Frequently Asked Questions ..............................................................................20

Technical Service................................................................................................. 21

Contact in case of fault ......................................................................................... 21

Warranty ................................................................................................................ 21

Optional accessories .......................................................................................... 21

Limited Warranty - Vacuum Cleaners USA ....................................................... 24

en - IMPORTANT SAFETY INSTRUCTIONS

5

This vacuum cleaner complies with current safety re-

quirements. Inappropriate use can, however, lead to per-

sonal injury and damage to property.

To avoid the risk of accidents and damage to the vacuum

cleaner, please read the operating instructions carefully

before using it for the first time. They contain important

information on its safety, operation and maintenance.

Keep these operating instructions in a safe place and

pass them on to any future user.

Always disconnect the vacuum cleaner from the power

supply when you have finished using it, before changing

any accessories, as well as for maintenance work and

cleaning. Turn the vacuum cleaner off and unplug it.

Correct use

 This vacuum cleaner is intended for cleaning flooring in

domestic households and similar residential environments.

 This vacuum cleaner can be used for all normal cleaning

of carpets, rugs and hard flooring.

 This vacuum cleaner is not intended for outdoor use.

 This vacuum cleaner is intended for use at altitudes of

up to 1300ft (4000m) above sea level.

 The vacuum cleaner must only be used to vacuum dry

floor surfaces. Do not use on people and animals. Any

other usage, modification or alteration is not supported by

the manufacturer and could be dangerous.

en - IMPORTANT SAFETY INSTRUCTIONS

6

 Persons which lack physical, sensory or mental abilities

or experience with the machine should not use it without

supervision or instruction by a responsible person.

Safety with children

 Danger of suffocation! Ensure that any plastic wrap-

pings, bags, etc. are disposed of safely and kept out of the

reach of children.

 Do not allow the vacuum cleaner to be used as a toy.

Close attention is necessary when used near children.

Technical safety

 Before using the vacuum cleaner and its accessories,

check for any visible signs of damage. Do not use a dam-

aged appliance.

 Ensure that the connection data on the data plate of the

vacuum cleaner (voltage and frequency) match the house-

hold power supply. Without modifications, the vacuum

cleaner is suited for 50Hz or 60Hz.

 The electrical outlet must be fitted with a 15 A fuse.

 Reliable and safe operation of this vacuum cleaner can

only be assured if it has been connected to the electricity

supply.

en - IMPORTANT SAFETY INSTRUCTIONS

7

 In areas with fluctuating power supplies the vacuum

cleaner may suffer a temporary drop in power. If the line

impedance is greater than 0.457ohm at the connection

point to the public power network, additional measures

may be required before the vacuum cleaner can be prop-

erly operated at this connection. The line impedance can

be requested from the local power supply company.

 Repairs must only be performed by an authorized ser-

vice agent in accordance with national and local safety

regulations. Unauthorized repairs could cause injury or ma-

chine damage. Otherwise the warranty will be void.

 Do not pull or carry the vacuum cleaner by the power

cord, and be careful not to damage the cord when with-

drawing the plug from the socket. Keep the cord away

from sharp edges and do not let it get pinched, for exam-

ple, under a door. Avoid running the vacuum cleaner over

the cord. This could damage the cord, plug or socket. The

appliance must not be used if any of these have suffered

damage.

 Do not use the vacuum cleaner if the power cord is

damaged. If the power cord is damaged it must be re-

placed with an original cable. For safety reasons this must

only be done by Miele Technical Service or a Miele autho-

rized service technician.

 The socket on the vacuum cleaner (depending on

model) must only be used for the Miele Electrobrushes

listed in these operating instructions.

en - IMPORTANT SAFETY INSTRUCTIONS

8

 Do not let the vacuum cleaner get wet. Clean only with a

dry cloth or slightly damp cloth when disconnected from

the electrical supply.

 Repairs should only be carried out by a Miele-authorized

service technician. Repairs and other work by unqualified

persons can cause considerable danger to users.

 Defective components should be replaced by Miele orig-

inal parts only. Only with these parts can the manufacturer

guarantee the safety of the appliance.

Proper use

 To avoid the risk of damage, do not use the vacuum

cleaner without the FilterBag, dust compartment filter and

exhaust filter in place.

 The dust compartment cover will not close without a Fil-

terBag inserted. Do not force it.

 Do not vacuum at head height and do not let the suction

get anywhere near a person's head.

 Do not vacuum up anything which has been burning or

smoking, e.g., cigarettes, ashes or hot ash, whether glow-

ing or apparently extinguished.

 Do not use the vacuum cleaner to vacuum up any water,

liquid or damp dirt. Wait until any freshly cleaned or sham-

pooed rugs or carpets are completely dry before attempt-

ing to vacuum.

 Do not use the vacuum cleaner to vacuum toner dust.

Toner, such as that used in printers and photocopiers, can

conduct electricity.

en - IMPORTANT SAFETY INSTRUCTIONS

9

 Do not vacuum up any flammable or combustible liquids

or gases and do not vacuum in areas where such sub-

stances are stored.

Accessories

 To avoid the risk of injury when vacuuming with a Miele

Powerbrush or Turbobrush, do not touch the rotating roller

brush.

 The Miele Electrobrush is a motor driven accessory for

use only with Miele vacuum cleaners. For safety reasons,

the vacuum cleaner must not be used with an Electrobrush

produced by another manufacturer.

 Only use genuine FilterBags, filters and accessories with

the "Original Miele" logo on them. Otherwise the manufac-

turer cannot guarantee the safety of the product.

SAVE THESE INSTRUCTIONS

en - Appliance description

10

en - Appliance description

11

a

Floorhead *

b

Filter bag change indicator

c

Dust compartment lid release button

d

Carry handle with controls

e

Two-piece accessory set on accessory clip *

f

Suction wand *

g

Release buttons

h

Handle with non-slip end cap and hook

i

Cable hooks for connection cable

j

Power cord

k

Cable clip

l

Telescopic suction wand release button *

m

Exhaust filter cover (on back)

n

Motor protection filter

o

Original Miele filter bag

p

Socket for Electrobrush *

* These features are model-specific and may vary or may not be available on your

vacuum cleaner.

en - Caring for the environment

12

Disposal of the packing mate-

rial

The cardboard box and packing materi-

als protect the appliance during ship-

ping. They have been designed to be

biodegradable and recyclable.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of children. Dan-

ger of suffocation!

Disposing of the FilterBags

and filters

Filterbags and filters are made from en-

vironmentally friendly materials, and can

be disposed of with the normal house-

hold waste, as long as they have been

used exclusively for general household

dust.

Disposing of your old appli-

ance

Before disposing of your old appliance

remove the FilterBag and filters and dis-

pose of them with your household

waste.

Electronic and electrical appliances

contain many valuable materials. They

also contain certain materials, com-

pounds and components which were

essential for their correct functioning

and safety. These could be hazardous

to your health and to the environment if

disposed of with general waste or if

handled incorrectly. Please do not,

therefore, dispose of your old appliance

with general waste.

Instead, please make use of officially

designated collection and disposal

points to dispose of and recycle electri-

cal and electronic appliances. By law,

you are solely responsible for deleting

any personal data from the appliance

prior to disposal. Please ensure that

your old appliance poses no risk to chil-

dren while being stored for disposal.

en-US

13

References to illustrations

The illustrations referred to in the text

are shown on the fold-out pages at

the end of these Operating Instruc-

tions.

Preparing for use

Attach the suction wand (Fig. 01)

 Fit the suction wand with the square

hole facing upwards into the body of

the vacuum cleaner and twist gently

until it clicks into place.

To detach the suction wand

 Press the release button (see detail)

and pull off the wand from the vac-

uum cleaner housing with a gentle

twist.

Connecting the handle to the wand

(Fig. 02)

 Fit the handle with the square hole

facing upwards into the wand and

twist gently until it clicks into position.

 To release the handle from the wand,

press the release button and pull the

handle out of the wand, twisting it

slightly as you do so.

The handle can also be fitted directly to

the body of the vacuum cleaner (Fig.

03).

The vacuum cleaner is then easier to

use, e.g., when vacuuming mattresses,

upholstery, etc.

Fitting the floorhead (Fig. 04)

 Attach the floorhead to the vacuum

cleaner connection stub and twist

gently until it clicks into position.

 To remove the floorhead, press the

release button and pull the vacuum

cleaner away from the floorhead

twisting it slightly as you do so.

The suction wand can also be attached

to the vacuum cleaner connection stub

(Fig. 05). This is useful for vacuuming

underneath low furniture, for example.

Winding up the power cord (Fig. 06)

When the vacuum cleaner is not in use,

the power cord can be wound around

the two cord hooks.

Secure the power cord by clipping the

plug to the cord (see detailed image).

Using the accessories supplied

(Fig. 07)

 Accessory clip

 Crevice nozzle

 Upholstery nozzle

Accessory clip (Fig. 08)

(as standard depending on model)

 If required, attach the accessory clip

to the suction wand.

 Push the accessory clip down over

the cable hook ring until it clicks into

position.

The accessory clip holds the acces-

sories (Fig. 09).

Some models are supplied as standard

with one of the following accessories

which are not illustrated.

– Electrobrush

– Turbobrush

en-US

14

These vacuum cleaners are supplied

with separate operating instructions for

the relevant accessory part.

Use

Unwind the power cord (Fig. 10)

The lower cable hook swivels.

 Turn it upwards to release the cable.

Adjusting the telescopic suction

wand (Fig. 11)

(depending on model)

One part of the telescopic suction wand

is packed inside the other, and it can be

adjusted to suit your height for comfort-

able vacuuming.

 Press the release button and adjust

the telescopic suction wand to the re-

quired length.

Plugging in the vacuum cleaner

(Fig. 12)

 Plug the vacuum cleaner into a

socket protected by at least a 10A

fuse.

 When vacuuming hang the cable over

the cable hook on the vacuum

cleaner (see detail).

This way the power cord will not get in

the way during vacuuming. It also pro-

tects the cable from becoming kinked

at the handle.

Switching on and off(Fig. 13 + 14)

There are two separate switches on the

carrying handle to enable the vacuum

cleaner to be conveniently operated in

any vacuum-cleaning situation.

Double slide switch

0 = Vacuum cleaner is switched off

min. = Reduced suction

max. = Maximum suction

Select min. for vacuuming lightweight

items such as curtains or rugs.

Select max. if using a turbobrush.

 To switch the vacuum cleaner on,

slide either switch to max.

 To switch the vacuum cleaner off,

push the slide switch to 0 until it

clicks.

Adjusting the floorhead (Fig. 15 + 16)

This vacuum cleaner can be used for

daily cleaning of carpets, rugs and ro-

bust hard flooring.

Miele offers a range of other floorheads,

brushes, and accessories for other

types of flooring and special applica-

tions (see "Optional accessories").

Please observe the flooring manufac-

turer's cleaning and care instructions.

Vacuum carpets and rugs with the

brush retracted:

 Press the foot switch  .

Clean hard flooring which is not sus-

ceptible to scratching, and flooring with

gaps or deep crevices in it with the

brush protruding:

 Press the foot switch .

en-US

15

When using the adjustable floorhead,

if the suction seems too high, reduce

the suction until the floorhead is eas-

ier to maneuver.

Setting down and storing the

vacuum cleaner

The vacuum cleaner can be leaned up-

right against a wall or furniture during

pauses in vacuuming or when storing it

(Fig. 17). For this purpose a non-slip

stopper is attached to the handle.

Before leaving the vacuum cleaner

make sure it is switched off and if you

lean it against a wall make sure it is at

a safe angle so that it cannot fall over.

When using a floorbrush we recom-

mend that you hang the vacuum

cleaner up when storing it to protect

the bristles.

The vacuum cleaner is easy to hang up

for this purpose. A hook is on the han-

dle so that you can do this (Fig. 18).

Maintenance

 Always switch off the vacuum

cleaner for maintenance work and

remove the plug from the outlet.

The Miele filtration system consists of

three components (Fig. 19):

 Original Miele FilterBag

 Motor protection filter

 Original Miele exhaust filter

These will need to be replaced from

time to time to ensure that your vacuum

cleaner performs efficiently.

We recommend only using genuine

FilterBags, filters, and accessories

with the "Original Miele" logo on

them. This will ensure that the suc-

tion power of the vacuum cleaner is

maintained, giving the best possible

cleaning results.

FilterBags with the "Original Miele"

logo on them are not made from pa-

per or paper-based materials and nor

do they have a cardboard collar. This

is why our FilterBags are particularly

long-lasting and reliable.

Please note that appliance faults and

damage originating from the use of

accessories which do not carry the

"Original Miele" logo will not be cov-

ered by the appliance guarantee.

Purchasing new FilterBags and filters

Original Miele FilterBags and filters are

available from the Miele web store,

Miele Technical Service, and your Miele

dealer.

Ordering the correct FilterBags and

filters

Only use original Miele KK FilterBags

with a yellow collar and original Miele

filters. These are identified by the

"ORIGINAL Miele" logo on the packag-

ing.

en-US

16

An AirClean filter and a motor protec-

tion filter are supplied with every packet

of Miele FilterBags.

Original Miele exhaust filters can also

be purchased separately from your

Miele dealer or from Miele. Please

quote the model number of your vac-

uum cleaner when ordering to make

sure you get the correct filter. You can

also order all accessories via the Miele

web store.

When to change the FilterBag

(Fig. 20)

Change the FilterBag when the color

marker in the FilterBag change indicator

turns red.

FilterBags are disposable and in-

tended to be used only once. Dis-

pose of the entire FilterBag. Do not

attempt to re-use. Blocked pores re-

duce the efficiency of the vacuum

cleaner.

Checking the FilterBag change indi-

cator

 Attach the standard adjustable floor-

head to the vacuum cleaner.

 Switch the vacuum cleaner on and

select the highest power setting.

 Lift the floorbrush off the floor a little.

How the FilterBag change indicator

works

The FilterBag change indicator is set for

normal household dust. This generally

contains a mixture of dust, hair,

threads, carpet lint, grit, etc.

However, if the cleaner has been used

to vacuum up fine dust, such as plaster,

brick dust, cement or flour, the pores of

the FilterBag will become blocked very

quickly.

This affects the air permeability of the

bag, and the marker will indicate that

the bag is "full" even when it is not. If

this happens you must still change the

FilterBag because suction power will be

greatly reduced by blocked pores in the

FilterBag.

If, on the other hand, a large amount of

hair and carpet lint which typically con-

tains a lot of air is vacuumed up, the in-

dicator may fail to react even though

the bag is full. You should still change it.

Both these extremes can occur.

How to replace the FilterBag

(Fig. 21 & 24)

 Press the release button for the dust

compartment lid and open the lid un-

til it clicks into its resting position.

 Pull one of the tabs on the collar and

swing the bag up away from the suc-

tion socket before taking it out of its

holder.

 Seal the bag by pressing both sides

of the closure under the seal.

The FilterBag is now sealed so that dust

cannot escape.

 Fit the new FilterBag into the yellow

holder as far as it will go. Leave it

folded up when you take it out of the

box.

 It should be unfolded as far as possi-

ble in the dust compartment.

en-US

17

 Close the dust compartment lid se-

curely, making sure it clicks into posi-

tion. Take care not to trap the Fil-

terBag when doing so.

 An empty operation lock pre-

vents the dust compartment lid from

closing without a filter bag in place.

Do not use force!

When to change the motor protection

filter

Replace this filter every time you start a

new packet of filter bags.

Every packet of original Miele filter bags

contains a motor protection filter.

How to change the motor protection

filter (Fig. 25)

 Open the dust compartment lid.

 Unclip the yellow filter frame, re-

move the old motor protection filter

and replace with a new one.

 Close the filter frame making sure the

catch engages.

 Close the dust compartment lid mak-

ing sure it clicks into position.

When to replace the exhaust filter

Depending on the model, your vacuum

cleaner will be fitted as standard with

one of the following exhaust filters (Fig.

26):

a AirClean

Replace this filter every time you start a

new packet of filter bags. Every packet

of original Miele filter bags contains one

AirClean exhaust filter.

b Active AirClean

c AirClean Plus

Replace these exhaust filters about

once a year. Make a note of the date on

the exhaust filter.

How to replace the AirClean exhaust

filter (Fig. 27 & 29)

Do not use more than one exhaust fil-

ter at a time.

 Press the button on the rear of the

vacuum cleaner and remove the

cover.

 Grasp the used AirClean exhaust filter

by the clean, unsoiled section and

take it out (see arrow).

 Replace it with a new AirClean ex-

haust filter.

If you wish to fit an Active AirClean

or AirClean Plus exhaust filter please

see "Replacing one type of exhaust

filter with another".

 Put the cover back on and close it.

How to replace an Active AirClean or

an AirClean Plus exhaust filter

(Fig. 30 & 31)

Do not use more than one exhaust fil-

ter at a time.

 Press the button on the rear of the

vacuum cleaner and remove the

cover (Fig. 27).

 Take out the used Active AirClean or

AirClean Plus exhaust filter.

 Insert a new Active AirClean or Air-

Clean Plus exhaust filter.

en-US

18

If you wish to fit an AirClean exhaust

filter, see "Replacing one type of ex-

haust filter with another".

 Put the cover back on and close it.

Replacing one type of exhaust filter

with another

Depending on the model, your vacuum

cleaner will be fitted as standard with

one of the following exhaust filters (Fig.

26).

a AirClean

b Active AirClean (SF-AA 10)

c AirClean Plus (SF-H 10)

Do not use more than one exhaust fil-

ter at a time.

When changing the filter please note

(Fig. 32)

1. If you wish to replace exhaust filter a

with filter b or c, you must com-

pletely remove the filter grille from the

lid before you install the new exhaust

filter.

2. If you wish to replace exhaust filter b

or c with filter a, it is essential that

you also fit the filter grille * in the lid.

* Filter grille – see "Optional acces-

sories"

To remove or insert the filter grille

(Fig. 32)

 Grasp inside the hexagons in the filter

grille with two fingers and squeeze

slightly. You can then remove or in-

sert the filter grille as required.

When to change the thread catchers

(not possible on EcoTeQ Plus floor-

heads)

The thread catchers on the suction inlet

to the floorhead can be replaced. Re-

place the thread catchers if the pile has

worn down.

How to replace the thread lifters

(Fig. 33 + 34)

 Use a suitable screwdriver to remove

the thread lifters from the slots.

 Fit new thread lifters.

Cleaning the roller on the AllTeQ

floorhead (Fig. 35)

Clean the roller on the floorhead if re-

quired.

 Release the bearing using a coin.

 Press the bearing out, and remove.

 Remove the roller.

 Remove any threads and hair, replace

the roller and refit the bearing, locking

it back into position.

Replacement parts are available from

your Miele dealer or through Miele

Technical Service.

Cleaning and care

 Always disconnect the vacuum

cleaner from the electrical supply be-

fore cleaning it. Turn off and unplug

it.

en-US

19

Vacuum cleaner and accessories

The vacuum cleaner and all plastic ac-

cessories can be cleaned with a propri-

etary cleaner suitable for plastic.

 Do not use abrasive cleaning

agents, glass cleaning agents, all-

purpose cleaners or oil-based condi-

tioning agents!

Dust compartment

The dust compartment can, if neces-

sary, be cleaned using a dry duster,

brush or, if available, a second vacuum

cleaner to vacuum the dust out.

Monitor the filter bag change indicator

and inspect all filters regularly. Clean or

replace them when necessary accord-

ing to these Operating Instructions.

 Do not let the vacuum cleaner

get wet. If moisture gets into the ap-

pliance, there is a risk of electric

shock.

en-US

20

Frequently Asked Questions

With the help of the following guide minor faults in the performance of the ma-

chine, some of which may result from incorrect operation, can be remedied with-

out contacting the Service Department. Time and money will be saved because a

service call will not be needed.

This guide may help you to find the reason for the fault, and how to correct it.

Problem Possible cause and solution

The vacuum cleaner

turns off automatically.

A temperature limiter switches the vacuum cleaner off

automatically when it gets too hot.

This can occur if, for instance, large objects block the

suction wand or when the filter bag is full or is

clogged with particles of fine dust. A heavily soiled

motor protection or exhaust filter can also be the

cause for overheating.

 Then switch off the vacuum cleaner and unplug it

from the socket.

After removing the cause of the fault, wait for approxi-

mately 20–30 minutes to allow the vacuum cleaner to

cool down. It can then be turned on again.

La page charge ...

Miele 41AAO035USA Manuel utilisateur

Miele 41AAO035USA Manuel utilisateur

dans d''autres langues

Documents connexes