Panasonic DMW-XLR1 Manuel utilisateur

Marque: Panasonic

Modèle: DMW-XLR1

Catégorie: Microphones

Taper: Manuel utilisateur

Operating Instructions

Manuel d’utilisation

使用说明书

XLR Microphone Adaptor

Adaptateur de microphone XLR

XLR 麦克风适配器

DMW-XLR1

Model No.

Modèle

型号

DVQX1208ZA

F0217WT0

If you have any questions, visit:

USA : http://shop.panasonic.com/support

Canada : www.panasonic.ca/english/support

Pour toute assistance supplémentaire, visiter :

www.panasonic.ca/french/support

Please read these instructions carefully

before using this product, and save this

manual for future use.

Veuillez lire attentivement les présentes

instructions avant d’utiliser ce produit, et

conserver ce manuel pour utilisation ultérieure.

请于使用前仔细阅读操作使用说明书，

并将说明书妥善保管，以备将来使用。

DMW-XLR1PP&E&GK-DVQX1208ZA.book 1 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (ENG)

Operating Instructions

XLR Microphone Adaptor

Thank you for purchasing Panasonic product.

Please read these instructions carefully before using this

product, and save this manual for future use.

Contents

Information for Your Safety.......................................... 2

Precautions.................................................................. 4

Supplied Accessories .................................................. 4

Names of Parts............................................................ 5

Attaching to the Camera .............................................. 6

Connecting a microphone............................................ 6

Using the XLR microphone adaptor............................. 7

Cautions for Use .......................................................... 9

Specifications............................................................. 10

Limited Warranty (ONLY FOR U.S.A.) ...................... 11

Limited Warranty (ONLY FOR CANADA).................. 13

Information for Your Safety

CAUTION!

To reduce the risk of fire, electric shock or product

damage,

• Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

ENGLISH

DMW-XLR1PP&E&GK-DVQX1208ZA.book 2 ページ２０１７年２月６日　月曜日　午後５時１１分

(ENG) DVQX1208

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

THE FOLLOWING APPLIES ONLY IN CANADA.

-If you see this symbol-

FCC Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the

attached installation instructions and use only shielded

interface cables when connecting to peripheral devices.

Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s

authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

that may cause undesired operation.

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

Support Contact: http://shop.panasonic.com/support

CAN ICES-3(B)/NMB-3(B)

Disposal of Old Equipment

Only for European Union and countries with

recycling systems

This symbol on the products, packaging, and/

or accompanying documents means that used

electrical and electronic products must not be

mixed with general household waste.

For proper treatment, recovery and recycling

of old products, please take them to applicable collection

points in accordance with your national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of this

waste, in accordance with national legislation.

DMW-XLR1PP&E&GK-DVQX1208ZA.book 3 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (ENG)

Precautions

This unit is an XLR microphone adaptor for Panasonic

digital cameras.

Attaching a commercially available XLR microphone and

combining it with a compatible digital camera enables

recording of high-quality stereo audio.

This unit supports high-resolution audio output. Attaching it

to a compatible digital camera enables recording of high-

resolution audio.

• Compatible devices (As of February 2017)

Compatible devices: DC-GH5

For the latest information on compatible devices, see the

operating instructions, catalogue or website of the digital

camera.

http://panasonic.jp/support/global/cs/dsc/

∫ Handling the unit

• Do not subject the unit to strong vibration or impact.

Those actions may result in malfunctions and failure.

• Sand and dirt may cause the unit to malfunction. When

using the unit in an environment such as a beach, take

steps to protect it from sand and dirt.

• When using the unit on rainy days or on a beach, take

care to keep the unit dry.

• This unit is neither dust-proof nor splash-proof. If by any

chance water droplets, etc. are splashed on the unit, wipe

them off with a dry cloth. If the unit fails to function

correctly, consult your dealer or Panasonic.

• Please also read the manual of your digital camera.

Supplied Accessories

Product numbers correct as of February 2017. These may

be subject to change.

1 Soft case

2 Cable holder

• This is attached to the unit at the time of purchase.

DVPY1001Z DVGE1055Z

DMW-XLR1PP&E&GK-DVQX1208ZA.book 4 ページ２０１７年２月６日　月曜日　午後５時１１分

(ENG) DVQX1208

Names of Parts

1 LINE/MIC/i48V switch (INPUT1)

2 GAIN switch (INPUT1)

3 LOW CUT switch (INPUT1)

4 GAIN switch (INPUT2)

5 LOW CUT switch (INPUT2)

6 LINE/MIC/i48V switch (INPUT2)

7 AUDIO LEVEL dial (INPUT2)

8 ALC switch

9 CH1/2 switch

: AUDIO LEVEL dial (INPUT1)

; Accessory shoe

< POWER lamp

= Lock lever

> Hot shoe mount

? Release lever

@ Cable holder

A XLR terminal (INPUT1)

B XLR terminal (INPUT2)











 









 

   

DMW-XLR1PP&E&GK-DVQX1208ZA.book 5 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (ENG)

Attaching to the Camera

Confirm that the camera is off. Attaching or removing the

XLR microphone adaptor while the camera is on may result

in malfunction.

1 Slide the lock lever in

the direction opposite to

that indicated by the

[LOCK 1] icon (1).

2 Slide the XLR

microphone adaptor into

the hot shoe until it

clicks securely into place

(2).

3 Slide the lock lever to the

[LOCK 1] position (3).

• To remove the XLR microphone adaptor, slide the lock

lever in the direction opposite to the [LOCK 1] arrow and

slide it from the hot shoe.

Connecting a microphone

Insert the microphone

cable plug into the XLR

terminal of the unit.

• To prevent unnecessary force

being applied to the digital

camera hot shoe, insert the

plug while holding the unit with your hand.

• If there is only one cable to be connected, connect it to

terminal [INPUT1].

• Use a shielded XLR microphone cable with a XLR (3 pin)

terminal.

• The microphone cable can be

attached to the unit’s cable holder.

• The orientation of the cable holder

can be changed. Remove the

cable holder and attach it in a

different orientation.

• Keep the cable holder out of

reach of children to prevent

swallowing.







DMW-XLR1PP&E&GK-DVQX1208ZA.book 6 ページ２０１７年２月６日　月曜日　午後５時１１分

(ENG) DVQX1208

• A commercially available XLR

microphone or microphone

holder can be attached to the

unit’s accessory shoe.

∫ Remove the microphone cable

Press the release lever

(1), and hold the plug to

remove it (2).

Using the XLR

microphone adaptor

This unit can be used by turning the power of the digital

camera [ON] while this unit is mounted on the digital

camera.

• The POWER lamp of the unit will turn on.

• The operational sound of the switch operation may be

recorded or the sound may get interrupted, such as when

the switch is operated during the recording of a motion

picture.

∫ Setting the recording level

Set the recording level of audio that is input to the XLR

terminals (INPUT1, INPUT2).

• The recording level of the built-in microphone of the digital

camera and the [MIC] terminal cannot be set.

1 Slide the ALC switch to

[OFF].

2 Rotate the

AUDIO LEVELdial

(INPUT1, INPUT2) to set

the recording level

(volume).

Setting the level while checking with headphones

connected to the digital camera or the digital camera

microphone level display is recommended.

Adjust the recording level automatically.

Slide the ALC switch to [ON]. At high volumes, the

recording level is decreased automatically to reduce

distortion with the sound.

∫ Decrease noise caused by wind or handling

Noise caused by wind or handling is reduced by cutting out

low-frequency components that are input to the XLR

terminals (INPUT1, INPUT2).

Set the LOW CUT switch

(INPUT1, INPUT2) to [16Hz]

or [160Hz].

• Select based on the type of

noise.





DMW-XLR1PP&E&GK-DVQX1208ZA.book 7 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (ENG)

∫ Using external audio

devices

1 Set the LINE/MIC/i48V

switch (INPUT1, INPUT2)

to match the connected

device.

Set the switch to the match the device connected to the

XLR terminals (INPUT1, INPUT2).

• When set to [i48V], connecting a device that does not

support i48V power supply may cause damage to the

connected device. Check the device before

connecting.

• If noise from the unconnected terminal is bothering, set

the LINE/MIC/i48V switch to [LINE].

2 (When [MIC], [i48V] is

set) Set the input level

with the GAIN switch

(INPUT1, INPUT2).

When the LINE/MIC/i48V switch is set to [MIC] or

[i48V], the input gain can be changed with the GAIN

switch.

• If the LINE/MIC/i48V switch is set to [LINE], the input

gain cannot be changed.

3 Set the recording

channel with the CH1/2

switch.

• If using a stereo microphone with two XLR (3 pin)

plugs, connect the Lch to XLR terminal (INPUT1), and

the Rch to XLR terminal (INPUT2), and set the CH1/2

switch to [INPUT 1/2].

[LINE] External audio devices (such as mixers).

[MIC]

Dynamic microphone or microphone with

built-in battery.

[i48V]

Microphone that supports i48V power

supply (phantom power supply).

[i20] i20 dB

[0]

0dB

(Default setting, standard level: j40 dBu)

[j20] j20 dB

Settings Audio recorded with CH1/CH2

[INPUT 1/1] INPUT1

CH1

CH2

[INPUT 1/2]

INPUT1 CH1

INPUT2 CH2

DMW-XLR1PP&E&GK-DVQX1208ZA.book 8 ページ２０１７年２月６日　月曜日　午後５時１１分

(ENG) DVQX1208

Cautions for Use

∫ About the unit

Do not use this unit near radio transmitters or high-

voltage lines.

• Noise may be present in images and sound recorded near

radio transmitters or high-voltage lines. Perform recording

in locations away from them. The level of noise varies

depending on the XLR microphone used.

Keep the unit away from insecticide sprays and other

volatile substances.

• Exposure to such substances may cause damage to the

external case and the text and symbols printed on the unit.

• Do not leave the unit in contact with any items made of

rubber or PVC for prolonged periods of time.

Do not carry the unit with your hands while it is still

attached to a digital camera.

• Under no circumstances should the unit be used or stored

in any of the following locations since doing so may cause

trouble in operation or malfunctioning:

– In direct sunlight or on a beach in summer

– In locations with high temperatures and humidity levels or

where changes in temperature and humidity are acute

– In locations with high concentrations of sand, dust or dirt

– Where there is fire

– Near heaters, air conditioners or humidifiers

– Where water may make the unit wet

– Where there is vibration

– Inside a vehicle

• Do not drop the unit, knock it into other objects or subject

it to any other kind of strong impact or shock.

• When recording a motion picture, the digital camera or

lens sounds or other operating noise may be recorded. If

the sound from the lens is particularly bothering, set the

camera to manual focus during use. If the operating noise

is particularly bothering, position the microphone away

from the digital camera during use.

• If the terminals are dirty they can cause faulty

connections. Wipe clean with a soft dry cloth before

connecting.

• Do not attach or remove cables with the power of the

digital camera turned [ON].

• Before use, check that the XLR microphone adaptor is

recording normally.

• Do not disassemble or modify this unit.

∫ Cleaning

When cleaning, wipe the unit with a dry soft cloth.

• When the unit is soiled badly, it can be cleaned by wiping

the dirt off with a wrung wet cloth, and then with a dry

cloth.

• Do not use solvents such as benzine, thinner, alcohol,

kitchen detergents, etc., to clean the unit, as these may

damage the external case and the text and symbols

printed on the unit.

• When using a chemical cloth, be sure to follow the

accompanying instructions.

DMW-XLR1PP&E&GK-DVQX1208ZA.book 9 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (ENG)

Specifications

Specifications are subject to change without notice.

The symbols on this product (including the accessories)

represent the following:

Input terminal INPUT1 terminal,

INPUT2 terminal: XLR3-pin, female

Standard input

level

LINE: 0 dBu

MIC, _48V: j40 dBu

(0 dBu=0.775 Vrms)

Standard

recording level

j12 dBFS (at the standard input)

Frequency

characteristic

20 Hz to 20 kHz,

1dB (Fs=48kHz)

20 Hz to 40 kHz,

1dB (Fs=96kHz)

GAIN switch _20, 0, j20 dB

LOW CUT switch

160 Hz, 16 Hz, OFF (cutoff frequency)

Dimensions Approx. 64.4 mm (W)k60.9 mm

(H)k81.8 mm (D)

[2.535q (W)k2.397q (H)k3.220q(D)]

(excluding the projecting parts)

Mass (weight) Approx. 173 g/0.381 lb

Operating

temperature

0 °C to 40 °C (32 °F to 104 °F)

Operating

humidity

10%RH to 80%RH

For the U.S.A.

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

http://shop.panasonic.com

For CANADA

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

www.panasonic.com

Printed in China

DMW-XLR1PP&E&GK-DVQX1208ZA.book 10 ページ２０１７年２月６日　月曜日　午後５時１１分

(ENG) DVQX1208

Limited Warranty

(ONLY FOR U.S.A.)

Panasonic Products Limited Warranty

Limited Warranty Coverage (For USA Only)

If your product does not work properly because of a defect

in materials or workmanship, Panasonic Corporation of

North America (referred to as “the warrantor”) will, for the

length of the period indicated on the chart below, which

starts with the date of original purchase (“warranty period”),

at its option either (a) repair your product with new or

refurbished parts, (b) replace it with a new or a refurbished

equivalent value product, or (c) refund your purchase price.

The decision to repair, replace or refund will be made by the

warrantor.

During the “Labor” warranty period there will be no charge

for labor. During the “Parts” warranty period, there will be no

charge for parts. This Limited Warranty excludes both parts

and labor for non-rechargeable batteries, antennas, and

cosmetic parts (cabinet). This warranty only applies to

products purchased and serviced in the United States. This

warranty is extended only to the original purchaser of a new

product which was not sold “as is”.

Mail-In Service

--Online Repair Request

Online Repair Request

To submit a new repair request and for quick repair status

visit our Web Site at http://shop.panasonic.com/support

When shipping the unit, carefully pack, include all supplied

accessories listed in the Owner’s Manual, and send it

prepaid, adequately insured and packed well in a carton

box. When shipping Lithium Ion batteries please visit our

Web Site at

http://shop.panasonic.com/support

as Panasonic is

committed to providing the most up to date information.

Include a letter detailing the complaint, a return address and

provide a daytime phone number where you can be

reached. A valid registered receipt is required under the

Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY

PERIOD, THE PURCHASER WILL BE REQUIRED TO

FURNISH A SALES RECEIPT/PROOF OF PURCHASE

INDICATING DATE OF PURCHASE, AMOUNT PAID AND

PLACE OF PURCHASE. CUSTOMER WILL BE

CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED

WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits and Exclusions

This warranty ONLY COVERS failures due to defects in

materials or workmanship, and DOES NOT COVER normal

wear and tear or cosmetic damage. The warranty ALSO

DOES NOT COVER damages which occurred in shipment,

or failures which are caused by products not supplied by the

warrantor, or failures which result from accidents, misuse,

abuse, neglect, mishandling, misapplication, alteration,

faulty installation, set-up adjustments, misadjustment of

Product or Part Name Parts Labor

Digital Camera Peripherals 1 Year 1 Year

Digital Camera Accessories 90 Days 90 Days

Rechargeable Batteries 1 Year 1 Year

DMW-XLR1PP&E&GK-DVQX1208ZA.book 11 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (ENG)

consumer controls, improper maintenance, power line

surge, lightning damage, modification, introduction of sand,

humidity or liquids, commercial use such as hotel, office,

restaurant, or other business or rental use of the product, or

service by anyone other than a Factory Service Center or

other Authorized Servicer, or damage that is attributable to

acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS

LISTED UNDER “LIMITED WARRANTY COVERAGE”.

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY

BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to

and from the servicer, loss of or damage to media or

images, data or other memory or recorded content. The

items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES,

INCLUDING THE WARRANTY OF MERCHANTABILITY,

ARE LIMITED TO THE PERIOD OF THE LIMITED

WARRANTY.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, or limitations on how

long an implied warranty lasts, so the exclusions may not

apply to you.

This warranty gives you specific legal rights and you may

also have other rights which vary from state to state. If a

problem with this product develops during or after the

warranty period, you may contact your dealer or Service

Center. If the problem is not handled to your satisfaction,

then write to:

Consumer Affairs Department

Panasonic Corporation of North America

661 Independence Pkwy

Chesapeake, VA 23320

PARTS AND SERVICE, WHICH ARE NOT COVERED BY

THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

As of March 2016

DMW-XLR1PP&E&GK-DVQX1208ZA.book 12 ページ２０１７年２月６日　月曜日　午後５時１１分

(ENG) DVQX1208

Limited Warranty (ONLY FOR CANADA)

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT – LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free

from defects in material and workmanship under normal use

and for a period as stated below from the date of original

purchase agrees to, at its option either (a) repair your

product with new or refurbished parts, (b) replace it with a

new or a refurbished equivalent value product, or (c) refund

your purchase price. The decision to repair, replace or

refund will be made by Panasonic Canada Inc.

This warranty is given only to the original purchaser, or the

person for whom it was purchased as a gift, of a Panasonic

brand product mentioned above sold by an authorized

Panasonic dealer in Canada and purchased and used in

Canada, which product was not sold “as is”, and which

product was delivered to you in new condition in the original

packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY

SERVICE HEREUNDER, A PURCHASE RECEIPT OR

OTHER PROOF OF DATE OF ORIGINAL PURCHASE,

SHOWING AMOUNT PAID AND PLACE OF PURCHASE

IS REQUIRED

Digital Camera One (1) year, parts and labour

Digital Camera

Peripherals

One (1) year, parts and labour

Digital Camera

Accessories

Ninety (90) days, parts and

labour

DMW-XLR1PP&E&GK-DVQX1208ZA.book 13 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (ENG)

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in

materials or workmanship, and DOES NOT COVER normal

wear and tear or cosmetic damage. The warranty ALSO

DOES NOT COVER damages which occurred in shipment,

or failures which are caused by products not supplied by

Panasonic Canada Inc., or failures which result from

accidents, misuse, abuse, neglect, mishandling,

misapplication, alteration, faulty installation, set-up

adjustments, misadjustment of consumer controls, improper

maintenance, improper batteries, power line surge, lightning

damage, modification, introduction of sand, humidity or

liquids, commercial use such as hotel, office, restaurant, or

other business or rental use of the product, or service by

anyone other than a Authorized Servicer, or damage that is

attributable to acts of God.

Dry cell batteries, printer ink cartridge and paper are also

excluded from coverage under this warranty.

Rechargeable batteries are warranted for ninety (90) days

from date of original purchase.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING ANY IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. IN NO EVENT WILL PANASONIC CANADA

INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE

USE OF THIS PRODUCT OR ARISING OUT OF ANY

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.

(As examples, this warranty excludes damages for lost

time, travel to and from the Authorized Servicer, loss of or

damage to media or images, data or other memory or

recorded content. This list of items is not exhaustive, but for

illustration only.)

In certain instances, some jurisdictions do not allow the

exclusion or limitation of incidental or consequential

damages, or the exclusion of implied warranties, so the

above limitations and exclusions may not be applicable.

This warranty gives you specific legal rights and you may

have other rights which vary depending on your province or

territory.

WARRANTY SERVICE

For product operation, repairs and information

assistance, please visit our Support page:

www.panasonic.ca/english/support

DMW-XLR1PP&E&GK-DVQX1208ZA.book 14 ページ２０１７年２月６日　月曜日　午後５時１１分

(FRE) DVQX1208

Manuel d’utilisation

Adaptateur de microphone XLR

Merci d'avoir fait l'achat d'un produit Panasonic.

Il est recommandé de lire attentivement ce manuel avant

d’utiliser l’appareil et de le conserver pour consultation

ultérieure.

Table des matières

Précautions à prendre................................................15

Précautions ................................................................ 16

Accessoires fournis.................................................... 16

Noms des éléments ...................................................17

Installation sur l'appareil photo ..................................18

Raccordement d'un microphone ................................18

Utilisation de l'adaptateur de microphone XLR..........19

Précautions à prendre................................................21

Spécifications.............................................................22

Garantie limitée.......................................................... 23

Précautions à prendre

CE QUI SUIT NE S’APPLIQUE QU’AU CANADA.

-Si ce symbole apparaît-

ATTENTION!

Afin d’éviter tout risque d’incendie, de choc

électrique ou de dommage à l’appareil :

• N’installez pas ou ne placez pas cet appareil dans une

bibliothèque, une armoire ou tout autre espace confiné.

Assurez-vous que la ventilation de l’appareil est adéquate.

CAN ICES-3(B)/NMB-3(B)

L’élimination des équipements usagés

Applicable uniquement dans les pays membres de l’Union

européenne et les pays disposant de systèmes de recyclage.

Apposé sur le produit lui-même, sur son

emballage, ou figurant dans la documentation qui

l’accompagne, ce pictogramme indique que les

appareils électriques et électroniques usagés,

doivent être séparés des ordures ménagères.

Afin de permettre le traitement, la valorisation

et le recyclage adéquats des appareils usagés, veuillez

les porter à l’un des points de collecte prévus,

conformément à la législation nationale en vigueur.

En les éliminant conformément à la réglementation en vigueur,

vous contribuez à éviter le gaspillage de ressources précieuses

ainsi qu’à protéger la santé humaine et l’environnement.

Pour de plus amples renseignements sur la collecte et le recyclage,

veuillez vous renseigner auprès des collectivités locales.

Le non-respect de la réglementation relative à l’élimination des

déchets est passible d’une peine d’amende.

FRANÇAIS

DMW-XLR1PP&E&GK-DVQX1208ZA.book 15 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (FRE)

Précautions

Cet appareil est un adaptateur de microphone XLR pour les

appareils photo numériques de Panasonic.

Installer un microphone XLR disponible dans le commerce

et le combiner avec un appareil photo numérique permet

d'enregistrer un son stéréo de haute qualité.

Cet appareil prend en charge la sortie du son en haute

résolution. L'installer sur un appareil photo numérique

permet d'enregistrer un son en haute résolution.

• Dispositifs compatibles (À compter de février 2017)

Dispositifs compatibles : DC-GH5

Pour avoir les toutes dernières informations sur les

dispositifs compatibles, consultez le mode d'emploi, le

catalogue ou le site Web de l'appareil photo numérique.

http://panasonic.jp/support/global/cs/dsc/

∫ Manipulation de l’appareil

• Ne soumettez pas l'appareil à de fortes vibrations ou à

des chocs. Cela peut être la cause de

dysfonctionnements et de pannes.

• Le sable et la saleté peuvent être la cause d'un

dysfonctionnement de l'appareil. En utilisant l'appareil

dans un endroit comme la plage, prenez des mesures

pour le protéger du sable et de la saleté.

• En utilisant cet appareil les jours de pluie ou à la plage,

prenez soin de le garder au sec.

• Cet appareil n'est ni à l'épreuve de la poussière ni à

l'épreuve des éclaboussures. Si par inadvertance des

gouttes d'eau etc. éclaboussent l'appareil, essuyez-les à

l'aide d'un chiffon doux et sec. Si l'appareil ne fonctionne

plus correctement, consultez votre revendeur ou

Panasonic.

• Veuillez lire également le mode d’emploi de votre appareil

photo numérique.

Accessoires fournis

Les codes du produit sont corrects à compter de février

2017. Ceux-ci sont susceptibles d’être modifiés.

1 Étui souple

2 Support de câble

• Celui-ci est fixé à l’appareil au moment de l’achat.

DVPY1001Z DVGE1055Z

DMW-XLR1PP&E&GK-DVQX1208ZA.book 16 ページ２０１７年２月６日　月曜日　午後５時１１分

(FRE) DVQX1208

Noms des éléments

1 Commutateur de ligne/micro LINE/MIC/i48V (INPUT1)

2 Commutateur de gain GAIN (INPUT1)

3 Commutateur passe-bas LOW CUT (INPUT1)

4 Commutateur de gain GAIN (INPUT2)

5 Commutateur passe-bas LOW CUT (INPUT2)

6 Commutateur de ligne/micro LINE/MIC/i48V (INPUT2)

7 Molette de niveau audio AUDIO LEVEL (INPUT2)

8 Commutateur de réglage automatique du niveau ALC

9 Commutateur des canaux 1/2 CH1/2

: Molette de niveau audio AUDIO LEVEL (INPUT1)

; Griffe porte-accessoires

< Voyant d’alimentation POWER

= Levier de verrouillage

> Griffe de montage

? Levier de relâche

@ Support de câble

A Prise XLR (INPUT1)

B Prise XLR (INPUT2)











 









 

   

DMW-XLR1PP&E&GK-DVQX1208ZA.book 17 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (FRE)

Installation sur l'appareil photo

Vérifiez que l'appareil photo est hors marche. Installer ou

retirer l'adaptateur de microphone XLR tandis que l'appareil

photo est en marche peut causer des dysfonctionnements.

1 Faites glisser le levier de

verrouillage dans le

sens opposé à celui

indiqué par l'icône

[LOCK 1] (1).

Faites glisser l'adaptateur

de microphone XLR dans la

griffe porte-accessoires

jusqu'à ce qu'il clique

solidement en place (

3 Faites glisser le levier de

verrouillage à la position

[LOCK 1] (3).

• Pour retirer l'adaptateur de microphone XLR, faites glisser

le levier de verrouillage dans le sens opposé à la flèche

[LOCK

] et faites-le glisser de la griffe porte-accessoires.

Raccordement d'un microphone

Branchez la fiche du câble

du microphone dans la

prise XLR de l'appareil.

• Pour éviter de forcer

inutilement sur la griffe porte-

accessoires de l'appareil photo

numérique, branchez la fiche en tenant l'appareil avec

votre main.

• S'il n'y a qu'un seul câble à brancher, branchez-le à la

prise [INPUT1].

• Utilisez un câble de microphone XLR blindé avec une

prise XLR (3 broches).

• Le câble du microphone peut être

fixé au support de câble de

l'appareil.

• L'orientation du support de câble

peut être changée. Retirez le

support de câble et installez-le

dans un autre sens.

• Conservez le support de câble

hors de portée des enfants pour

qu’ils ne puissent pas l’avaler.







DMW-XLR1PP&E&GK-DVQX1208ZA.book 18 ページ２０１７年２月６日　月曜日　午後５時１１分

(FRE) DVQX1208

• Un microphone XLR ou un

support de microphone

disponibles dans le commerce

peuvent être installés sur la griffe

porte-accessoires de l'appareil.

∫ Retrait du câble du microphone

Appuyez sur le levier de

relâche (1), et tenez la

fiche pour la retirer (2).

Utilisation de

l'adaptateur de microphone XLR

Cet appareil peut être utilisé en mettant l'appareil photo

numérique sur [ON] tandis qu'il est installé sur ce dernier.

• Le voyant POWER de l'appareil s'allumera.

• Le son de fonctionnement de la mise en marche peut être

enregistré ou bien le son peut être coupé, comme lorsque

le commutateur est utilisé pendant l’enregistrement d'un

film.

∫ Réglage du niveau d’enregistrement

Réglez le niveau d'enregistrement du son qui entre par les

prises XLR (INPUT1, INPUT2).

• Le niveau d'enregistrement du microphone incorporé de

l'appareil photo numérique et de la prise [MIC] ne peut

pas être réglé.

1 Faites glisser le

commutateur ALC sur

[OFF].

2 Tournez la molette

AUDIO LEVEL (INPUT1,

INPUT2) pour régler le

niveau d'enregistrement

(volume).

Le réglage du niveau tout en contrôlant à l'aide d'un

casque branché à l'appareil photo numérique ou à l'aide

de l'affichage du niveau du microphone de l'appareil

photo numérique est recommandé.

Réglage automatique du niveau d'enregistrement

Faites glisser le commutateur ALC sur [ON]. À hauts

volumes, le niveau d'e nregistrement est baissé

automatiquement pour réduire la déformation du son.

∫ Réduction du bruit causé par le vent ou la

manipulation

Le bruit créé par le vent ou la manipulation est réduit en

retirant les composantes basses fréquences qui entrent par

les prises XLR (INPUT1, INPUT2).

Réglez le commutateur

LOW CUT (INPUT1, INPUT2)

sur [16Hz] ou [160Hz].

• Choix basé sur le type de bruit.





DMW-XLR1PP&E&GK-DVQX1208ZA.book 19 ページ２０１７年２月６日　月曜日　午後５時１１分

DVQX1208 (FRE)

∫ Utilisation de dispositifs

audio externes

1 Réglez le commutateur

LINE/MIC/i48V (INPUT1,

INPUT2) selon le

dispositif raccordé.

Réglez le commutateur sur le dispositif raccordé

correspondant aux prises XLR (INPUT1, INPUT2).

• Lorsqu'il est réglé sur [i48V], brancher un dispositif

qui ne prend pas en charge i48V de tension peut

causer des dommages au dispositif raccordé. Vérifiez

le dispositif avant de le brancher.

• Si un bruit provenant d'une prise non branchée vous ennuie,

réglez le commutateur LINE/MIC/

48V sur [LINE].

(Lorsque [MIC], [

48V] est

sélectionné) Réglez le niveau

d'entrée à l'aide du commutateur

GAIN (INPUT1, INPUT2).

Lorsque le commutateur LINE/MIC/i48V est réglé sur

[MIC] ou sur [i48V], le gain d'entrée peut être changé

avec le commutateur GAIN.

• Si le commutateur LINE/MIC/i48V est réglé sur

[LINE], le gain d'entrée ne peut pas être changé.

3 Réglez le canal

d'enregistrement avec le

commutateur CH1/2.

• Si vous utilisez un microphone stéréo avec deux fiches

XLR (3 broches), branchez le canal gauche dans la

prise XLR (INPUT1), et le canal droit dans la prise XLR

(INPUT2), et réglez le commutateur CH1/2 sur

[INPUT 1/2].

[LINE]

Dispositifs audio externes (comme les tables

de mixage).

[MIC]

Microphone dynamique ou microphone avec

batterie incorporée.

[i48V]

Microphone prenant en charge une tension

de i48V (alimentation fantôme)

[i20] i20 dB

[0]

0dB

(Réglage par défaut, niveau standard :

j40 dBu)

[j20] j20 dB

Configuration

Son enregistré avec CH1/CH2

[INPUT 1/1] INPUT1

CH1

CH2

[INPUT 1/2]

INPUT1 CH1

INPUT2 CH2

DMW-XLR1PP&E&GK-DVQX1208ZA.book 20 ページ２０１７年２月６日　月曜日　午後５時１１分

La page charge ...

Panasonic DMW-XLR1 Manuel utilisateur

Marque: Panasonic

Modèle: DMW-XLR1

Catégorie: Microphones

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: Panasonic DMW-XLR1 Manuale utente
English: Panasonic DMW-XLR1 User manual
español: Panasonic DMW-XLR1 Manual de usuario
Deutsch: Panasonic DMW-XLR1 Benutzerhandbuch
русский: Panasonic DMW-XLR1 Руководство пользователя

Panasonic DMW-XLR1 Manuel utilisateur

Panasonic DMW-XLR1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents