GE UNC15NJII Mode d'emploi

Write the model and serial

numbers here:

Model # _________________

Serial # _________________

Find these numbers on a label

on the top inner case liner of the

unit toward the front.

GE is a trademark of the General Electric Company. Manufactured under trademark license.

OWNER’S MANUAL

AND INSTALLATION

INSTRUCTIONS

ICE MACHINE

49-60744 Rev. 7 03-19 GEA

UNC15

ENGLISH/FRANÇAIS/

ESPAÑOL

SAFETY INFORMATION .........3

USING THE ICE MACHINE

Packaging ............................5

Controls ..............................5

Features ..............................6

Starting the Ice Machine ................6

INSTALLATION INSTRUCTIONS

Grounding the Ice Machine ..............7

Before You Begin ......................7

Location and Preparation ...............7

Advance Planning .....................9

Dimensions ..........................10

Door Swing .......................... 11

Door Panel ...........................12

Handle Reversing Instructions ..........14

Plumbing ............................14

Placement of the Ice Machine ..........15

CARE AND CLEANING ..........16

TROUBLESHOOTING TIPS ......19

LIMITED WARRANTY .......... 20

ACCESSORIES ...................21

CONSUMER SUPPORT ......... 24

2 49-60744 Rev. 7

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family.

We take pride in the craftsmanship, innovation and design that goes into every GE Appliances

product, and we think you will too. Among other things, registration of your appliance ensures that we

can deliver important product information and warranty details when you need them.

Register your GE appliance now online. Helpful websites and phone numbers are available in the

Consumer Support section of this Owner’s Manual. You may also mail in the pre-printed registration

card included in the packing material.

49-60744 Rev. 7 3

CAUTION

To reduce the risk of injury when using your appliance, follow these basic safety precautions.

Ŷ .HHSILQJHUVRXWRIWKH³SLQFKSRLQW´DUHDV

clearances between the doors and between the

doors and cabinet are necessarily small. Be careful

closing doors when children are in the area.

Ŷ $YRLGFRQWDFWZLWKWKHPRYLQJSDUWVRIWKHHMHFWRU

mechanism, or with the heating element that

releases the cubes. Do not place fingers or hands on

the automatic ice making mechanism while the ice

machine is plugged in.

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

WARNING

To reduce the risk of fire, explosion, electric shock, or injury when using your ice

machine follow these basic safety precautions:

Ŷ 7KLVLFHPDFKLQHPXVWEHSURSHUO\LQVWDOOHG

and located in accordance with the Installation

Instructions before it is used.

Ŷ 8QSOXJWKHDSSOLDQFHEHIRUHPDNLQJUHSDLUV

replacing a light bulb, or cleaning.

NOTE: Power to the appliance cannot be

disconnected by any setting on the control panel.

NOTE: Repairs must be performed by a qualified

service professional.

Ŷ 5HSODFHDOOSDUWVDQGSDQHOVEHIRUHRSHUDWLQJ

Ŷ 'RQRWVWRUHRUXVHJDVROLQHRURWKHUIODPPDEOH

vapors and liquids in the vicinity of this or any other

appliance.

Ŷ %HFDXVHRISRWHQWLDOVDIHW\KD]DUGVXQGHUFHUWDLQ

conditions, we strongly recommend against the use

of an extension cord. However, if you must use an

extension cord, it is absolutely necessary that it be a

8/OLVWHGLQWKH8QLWHG6WDWHVRUD&6$FHUWLILHGLQ

&DQDGDZLUHJURXQGLQJW\SHDSSOLDQFHH[WHQVLRQ

cord having a grounding type plug and outlet and

that the electrical rating of the cord be 15 amperes

PLQLPXPDQGYROWV

Ŷ 7RSUHYHQWVXIIRFDWLRQDQGHQWUDSPHQWKD]DUGVWR

children, remove the door from any appliance before

disposing of it or discontinuing its use.

Ŷ 'RQRWDOORZFKLOGUHQWRFOLPEVWDQGRUKDQJRQWKH

door handle of the appliance. They could seriously

injure themselves.

Ŷ ,FHPDFKLQHVFDOHUHPRYHUFRQWDLQVDFLGV$FLGV

can cause burns. If concentrated cleaner comes in

contact with skin, flush with water. If swallowed, do

NOT induce vomiting. Drink large amounts of water

RUPLON&DOO3K\VLFLDQLPPHGLDWHO\.HHSRXWRIWKH

reach of children.

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

INSTALLATION

WARNING

EXPLOSION HAZARD

.HHSIODPPDEOHPDWHULDOVDQGYDSRUVVXFKDVJDVROLQHDZD\IURPDSSOLDQFH)DLOXUHWRGRVRFDQUHVXOWLQILUH

explosion, or death.

4 49-60744 Rev. 7

WARNING

SUFFOCATION AND CHILD ENTRAPMENT HAZARD

5HPRYHWKHGRRUIURPWKHDSSOLDQFHSULRUWRGLVSRVDO)DLOXUHWRGRVRFDQUHVXOWLQFKLOGHQWUDSPHQWZKLFKFDQ

lead to death or brain damage.

IMPORTANT: Child entrapment and suffocation are not

problems of the past. Junked or abandoned appliances

DUHVWLOOGDQJHURXVHYHQLIWKH\ZLOOVLWIRU³MXVWDIHZ

GD\V´,I\RXDUHJHWWLQJULGRI\RXUROGDSSOLDQFH

please follow the instructions below to help prevent

accidents.

Before You Throw Away Your Old Appliance:

Ŷ Take off the doors.

Ŷ /HDYHWKHLQWHUQDOFRPSRQHQWVLQSODFHVRWKDW

children may not easily climb inside.

Refrigerants

All refrigeration products contain refrigerants, which

under federal law must be removed prior to product

disposal. If you are getting rid of an old refrigeration

product, check with the company handling the disposal

about what to do.

PROPER DISPOSAL OF YOUR OLD APPLIANCE

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For

personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a

SURQJJURXQGLQJSOXJZKLFKPDWHVZLWKDVWDQGDUG

SURQJJURXQGLQJZDOORXWOHWWRPLQLPL]HWKH

SRVVLELOLW\RIHOHFWULFVKRFNKD]DUGIURPWKLVDSSOLDQFH

Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly

grounded.

Where a standard 2-prong wall outlet is encountered, it

is your personal responsibility and obligation to have it

replaced with a properly grounded 3-prong wall outlet.

The ice maker should always be plugged into its own

YROW+]DPSFLUFXLW7KLVSURYLGHVWKHEHVW

performance and also prevents overloading house

ZLULQJFLUFXLWVZKLFKFRXOGFDXVHDILUHKD]DUGIURP

overheated wires.

Never unplug your ice maker by pulling on the power

cord. Always grip plug firmly and pull straight out from

the outlet.

Repair or replace immediately all power cords that

have become frayed or otherwise damaged. Do not

use a cord that shows cracks or abrasion damage

along its length or at either end.

When moving the ice maker, be careful not to roll over

or damage the power cord.

KEEP FROM FREEZING: Severe damage will occur

to the unit if left in or operated in temperatures beyond

the limits listed in this manual. That damage is NOT

covered by warranty.

KEEP DRY: Do not locate in low lying areas where

puddles will accumulate

PROVIDE SHADE: Heat gain from the sun will reduce

the unit's ability to make and store ice, and ultraviolet

radiation from the sun can potentially damage the unit's

plastic components.

WATER SUPPLY: Avoid a long run of hose or tubing

exposed to the sun. Plastic water supply tubing should

EHUDWHGIRUSRWDEOHZDWHUDQGLQFOXGH89SURWHFWLRQ

Copper tubing is recommended.

BACK FLOW PREVENTION: The unit includes back

flow prevention, no additional check valve is required.

DRAINAGE: DO NOT drain into swimming pool or onto

grounds.

CONNECTING ELECTRICITY

OUTDOOR USE NOTICE

WARNING

ELECTRICAL SHOCK HAZARD

Plug into a grounded 3-prong outlet

Do not remove the ground prong

Do not use an adapter

)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVFDQUHVXOWLQGHDWKILUHRUHOHFWULFDOVKRFN

SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

READ AND SAVE THESE INSTRUCTIONS

49-60744 Rev. 7 5

Remove Packaging

IMPORTANT: Do not remove any permanent

instruction labels inside your ice machine or the Tech

Sheet that is fastened behind the lower access panel.

Ŷ5HPRYHWDSHDQGDQ\ODEHOVIURP\RXULFHPDNHU

EHIRUHXVLQJH[FHSWWKHPRGHODQGVHULDOQXPEHU

ODEHO

To remove any remaining tape or glue, rub the area

briskly with your thumb. Tape or glue residue can

also be easily removed by rubbing a small amount of

liquid dish soap over the adhesive with your fingers.

Wipe with warm water and dry.

Ŷ'RQRWXVHVKDUSLQVWUXPHQWVUXEELQJDOFRKRO

flammable fluids or abrasive cleaners to remove tape

or glue. These products can damage the surface of

\RXULFHPDNHU)RUPRUHLQIRUPDWLRQVHH,PSRUWDQW

Safety Instructions.

1. POWER ON/OFF - Press to turn the ice machine on or off.

2. ICE MAKING - Glows white when the unit is ON.

3. CHECK WATER - Glows red when there is not water supplied to the machine.

4. TIME TO CLEAN - Glows yellow when it's time to clean the machine. The light will switch ON after 6 months of

use. It will remain on until the ice making system is cleaned using the process in the Care and

Cleaning section.

5. CLEAN RESET 3UHVVHGZLWK3RZHUEXWWRQIRUVHFRQGVWRVWDUWWKHFOHDQLQJSURFHVVVHH&DUHDQG&OHDQLQJ

POWER

ON/OFF

CLEAN

RESET

TIME TO

CLEAN

CHECK

WATER

ICE

MAKING

Packaging

USING THE ICE MACHINE: Packaging/ Controls

1 2 3 4 5

Controls

6 49-60744 Rev. 7

Starting the ice machine

POWER

ON/OFF

CLEAN

RESET

TIME TO

CLEAN

CHECK

WATER

ICE

MAKING

Ice scoop

.LFNSODWH

Control panel

)URQWVHUYLFHSDQHO

Initial Start Up

1. Turn on the water supply.

2. Switch on the electrical power.

3XVKDQGUHOHDVHWKH212))VZLWFKWRVWDUWWKH

PDFKLQH7KH,&(0$.,1*OLJKWQH[WWRWKH212))

switch will glow white.

,WZLOOWDNHDERXWPLQXWHVIRUWKHLFHPDFKLQHWREHJLQ

dropping nugget ice into the storage bin. It is normal for

that ice to melt and continue to melt but at a slower rate

as the bin cools. It will take about 6-7 hours to fill up the

LFHVWRUDJHELQ7KHVWRUDJHELQKROGVDERXWOEVRILFH

when full.

Discard the first bin full of ice.

Features

USING THE ICE MACHINE:)HDWXUHV6WDUWLQJWKHLFHPDFKLQH

This machine takes in room temperature air at the lower

right front and forces warm air out the lower left front.

Restricting the airflow or operating the machine in a hot

or cold environment will adversely affect the ability of the

ice machine to make ice.

When the door is opened, the control panel, ice making

area and ice storage bin are visible. The scoop is located

in a holder along the right side wall.

This is a gravity drain model that must have a building

drain connection below the level of the drain tube at the

back of the cabinet. A pump can be installed, which can

IRUFHGUDLQZDWHUXSDPD[LPXPRIIHHWDOORZLQJLW

to be located where a gravity drain isn't available. See

Accessories on page 21 for more information on the

drain pump.

Warm Air Out

Air Intake

49-60744 Rev. 7 7

GROUNDING THE ICE MACHINE

WARNING

Electrical Shock Hazard.

)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVFDQUHVXOWLQGHDWK

fire, or electrical shock.

The power cord of this appliance is equipped with a

SURQJJURXQGLQJSOXJZKLFKPDWHVZLWKDVWDQGDUG

SURQJJURXQGLQJZDOORXWOHWWRPLQLPL]HWKH

SRVVLELOLW\RIHOHFWULFVKRFNKD]DUGIURPWKLVDSSOLDQFH

Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly

grounded.

Where a standard 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have

it replaced with a properly grounded 3-prong wall

outlet.

'212781'(5$1<&,5&8067$1&(6&8725

5(029(7+(7+,5'*5281'3521*)520

THE POWER CORD.

'212786($1$'$37(53/8*72&211(&7

7+($33/,$1&(72$3521*287/(7

'212786($1(;7(16,21&25':,7+7+,6

$33/,$1&(

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com

In Canada, call 1.800.561.3344 or visit our Website at: GEAppliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

• IMPORTANT — Observe all governing codes

and ordinances. Save these instructions for local

inspector’s use.

• Note to Installer – Be sure to leave these

instructions with the Consumer.

• Note to Consumer – .HHSWKHVHLQVWUXFWLRQVIRU

future reference.

• Skill level – Installation of this appliance requires

basic mechanical skills.

• Completion time – Installation can vary

:DWHU/LQH,QVWDOODWLRQ

minutes

• Proper installation is the responsibility of the

installer.

• Product failure due to improper installation is not

covered under the Warranty.

ICE MACHINE LOCATION AND

PREPARATION

This ice machine is designed to be used indoors, in

a controlled environment or outdoors within certain

limits.

It is made up of two major systems: the ice making

system and the ice storage system. The ice making

system is a continuous flow that makes ice when the

ice level becomes low and stops when it is full.

The ice storage system is an insulated chest

with a drain at the bottom for melting ice. It is not

refrigerated, insuring that the bin contains fresh ice.

During ice making, nugget ice will drop into the bin

DWDQLUUHJXODUUDWHVRPHWLPHVWKHUHZLOOEHOLWWOHLFH

falling while other times a group of nuggets will fall.

IMPORTANT: Never keep anything in the ice storage

bin that is not ice. Objects like wine or beer bottles are

not only unsanitary, but the labels can slip off and plug

up the drain.

IMPORTANT: Never allow the machine to operate

without regular cleaning. The machine will last longer

if it is kept clean. Regular cleaning should happen

at least once per year, and preferably twice. Some

water conditions will dictate even more frequent

cleaning of the ice making section, and some carpets

or pets will dictate more frequent cleaning of the

condenser.

Specifications

The ice machine will operate adequately within the

limits, but functions best in temperatures between

)DQG)

0LQLPXPDLUWHPSHUDWXUH)&

0D[LPXPDLUWHPSHUDWXUH)&

0LQLPXPZDWHUWHPSHUDWXUH)&

0D[LPXPZDWHUWHPSHUDWXUH)&

0LQLPXPZDWHUSUHVVXUHSVLEDU

0D[LPXPZDWHUSUHVVXUHSVLEDU

Electrical voltage limits:

See the Rating Plate inside the ice machine.

INSTALLATION INSTRUCTIONS

Installation

Instructions

ICE MACHINE

 49-60744 Rev. 7

Installation Instructions

INSTALLATION INSTRUCTIONS

ICE MACHINE LOCATION AND PREPARATION (Cont.)

Utility and Operational Requirements

• This ice machine must be connected to a potable

water supply.

• The water supply must have a conductivity of at least

PLFUR6LHPHQVFP

The water to this ice machine must be potable, or

fit for human consumption. During ice making some

minerals will stick to the ice making components.

The higher the mineral content, the more mineral

build up will occur. Water filters are a partial help,

as they will remove the suspended solids, but water

treatment is needed for the dissolved solids, which

are part of the water and cannot be filtered out. We

UHFRPPHQGXVLQJD*($SSOLDQFHV:DWHU)LOWHURQ

your water inlet line such as GE Appliances Model

1XPEHU*;5/43OHDVHJRWRGEAppliances.com

to review the installation instructions and determine

which filter will suit your application. In Canada visit

GEAppliances.ca.

This machine can be supplied with Reverse Osmosis

water, but the water conductivity must be no less

WKDQPLFUR6LHPHQVFP$UHYHUVHRVPRVLVV\VWHP

should include post treatment or blending to satisfy

the R.O. water's potential aggressiveness.

'HLRQL]HGZDWHULVQRWUHFRPPHQGHGDQGFRXOG

damage the machine.

Because water softeners exchange one mineral

for another, softened water may not improve water

conditions when used with ice machines.

0LQLPXPZDWHUSUHVVXUHSVL

0D[LPXPZDWHUSUHVVXUHSVL

0LQLPXPZDWHUWHPSHUDWXUH)

0D[LPXPZDWHUWHPSHUDWXUH)

This ice machine is designed to operate in a wide

range of air temperatures with a minimum air

WHPSHUDWXUHRI)DQGDPD[LPXPDLUWHPSHUDWXUH

RI)

Although the machine will function within the listed

ranges, it works best at water temperatures between

)DQG)DQGDLUWHPSHUDWXUHVEHWZHHQ)

DQG)

NOTE: Ice making capacity goes down as the

environmental temperatures go up, and will be

VHYHUHO\UHGXFHGDWWHPSHUDWXUHVRYHU)

Operating a unit outside of the limits can cause

problems that are not covered by the warranty and, if

extreme, cause damage to the unit.

This machine can be built into a cabinet. It is an

air cooled refrigeration system. Air flows in and out

of it through the grill at the bottom front. The grille

must not be blocked by any covering door, or other

obstruction.

49-60744 Rev. 7 9

ADVANCE PLANNING

CAUTION

Due to excessive weight, TWO

PEOPLE ARE REQUIRED TO MOVE AND INSTALL

THIS Ice maker. Failure to do so can result in back or

other injury.

Cutout & Product Dimensions

Installation Notes

A drain pump is available for this ice machine. The

GUDLQSXPSNLWQXPEHULV83.DQGLVDYDLODEOHDW

GEApplianceparts.com or by calling

In Canada visit GEAppliances.ca or

call 800.561.3344.

Built-In Installation: If a finished floor is to be installed

in the area after the ice machine has been built in,

shims the expected thickness of the floor should be

installed under the unit to keep the machine level with

the planned floor level.

NOTE: The water connection is at the back and adds a

few inches to the cabinet depth.

Installation on a slab: You will need to install a drain

pump to the appliance and pump the water to the point

of drainage. See Accessories. Pumps will pump 1

VWRU\IHHWKLJKW

Installation over a crawl space or basement: Either

DJUDYLW\GUDLQRUDSXPSPD\EHXVHG)RUSXPSVHH

Accessories. If there is not enough room behind the

machine for a drain/waste receptacle, the drain will

have to be below the floor.

NOTE: When installed in a corner, the door swing may

be limited due to handle contact with the wall or cabinet

face.

A water supply is required. Water supplies vary in the

degree of mineral content. High mineral content water

will require more frequent maintenance. Water filtration

may improve the taste of the ice as well as cut down on

some of the mineral build up.

Installation Instructions

INSTALLATION INSTRUCTIONS

 49-60744 Rev. 7

3 7/8"

20 3/8"

FLOOR DRAIN

ACCESS HOLE

3/4"

SHEET METAL DOOR FRONT - IF DOOR KIT INSTALLED

.63 MIN. CABINET DOOR

2 3/8"

DOOR KIT

AND HANDLE

14-7/8"

2 1/2"

115V

POWER CORD

1"

LEG ADJUSTMENT

(4) PLACES

2-3/4"

LEFT SIDE SVC.

ACCESS PANEL

7 1/2"

11 5/8"

DRAIN ACCESS - FLEXIBLE TUBING

5/8" I.D. x 7/8" O.D.

29-1/8"

4-1/4"

AIR INAIR OUT

33 7/8

"

3 1/4"

5 1/8"

2 3/4"

1/4" O.D. COPPER

WATER INLET

COMPRESSION

FITTING PROVIDED

22"3/4"

DIMENSIONS

Installation Instructions

INSTALLATION INSTRUCTIONS

49-60744 Rev. 7 11

DOOR SWING

Moving the hinges allows the door to open from either

the left or the right side. Change the swing BEFORE

attaching the door panel.

To change:

1. Open the door. Remove 4 stainless steel screws

opposite the hinge side on the front of the cabinet.

2. Remove innermost screw holding each hinge to the

FDELQHW/RRVHQWKHRWKHUVFUHZ

3. Slide the door to the side so the keyhole on the

hinge clears the screw and remove from cabinet.

4. Remove the screws that were loosened and save.

Install the 4 stainless steel screws that were

removed in Step 1 into the open holes on the

cabinet left by removing the hinge.

5. Remove the hole plug and hinge opening covers

IURPGRRULIDSSOLFDEOH

6. Remove hole plugs or screws from unit's new hinge

ORFDWLRQVLIDSSOLFDEOH6HWDVLGH

7. Install the 2 hinge screws removed after the door

was removed from the cabinet into the outermost

holes on the new hinge side of the cabinet. Screw

these in only about half way.

5HPRYHWKHXSSHUKLQJHIURPWKHGRRUDQGPRYHLW

to the door's opposite side, bottom location. Secure

using the original screws.

NOTE: If door panel is attached, it must be

removed to access hinge screws and to reverse

the handle position.

9. Remove the original lower door hinge and move it

to the opposite side, upper location. Secure using

original screws.

IMPORTANT: If installing a stainless steel door

SDQHORUFXVWRPSDQHOVNLSWR,167$//,1*7+(

'2253$1(/ section.

,QVWDOOSRFNHWFRYHUVDQGKROHSOXJVRQWRGRRU

11. Place the keyhole slot on the hinge over the

outermost screw, top and bottom, and slide the

door onto the cabinet.

12. Install the door to the cabinet using the original

screws. Tighten all 4 screws.

IMPORTANT: In some situations the door can

open too far and damage adjacent cabinets. To

SUHYHQWWKLVLQVHUWD6WRS3LQLQKDUGZDUHSDFNHW

into the provided hole in the top and bottom hinges.

Drive the pin into the hole until the head is flush

with the hinge.

13. Slide the hinge covers from the hardware packet

over each hinge.

14. Attach the side covers from the hardware packet

over the hinge by peeling off the covering over the

adhesive and placing it over the side of the hinge.

NOTE: If the unit is being built-in a screw can be

used to secure the unit to the cabinet in place of

installing the side covers.

Hole plug

Hinge Opening Cover

Remove

/RRVHQ

Door stop pin

Hinge Cover

Side

Cover

Installation Instructions

INSTALLATION INSTRUCTIONS

12 49-60744 Rev. 7

INSTALLING THE DOOR PANEL

The ice machine is supplied without a conventional

door covering, allowing the attachment of a door panel

or a custom panel.

NOTE: If the door swing is to be changed, it needs to

be done BEFORE attaching the door panel.

Door Panel

)LQLVKHGGRRUSDQHOVZLWKKDQGOHVDUHDYDLODEOHIURP

GE Appliances for attachment to the ice machine. See

Accessories on page 21.

A custom panel of wood or other material not

exceeding 15 lbs can be used and must follow these

guidelines:

 ZLGWK´

 KHLJKWEHWZHHQ´DQG´

 WKLFNQHVV´WR´

For Custom Panel:

1. Measure overall height of the cabinet opening

ZKHUHWKHLFHPDFKLQHZLOOEHLQVWDOOHGIORRUWR

ERWWRPRIWKHFRXQWHUWRSHGJH

 'HWHUPLQHGHVLUHGWRHNLFNKHLJKWERWWRPRIGRRU

WRWKHIORRU7KLVFDQEHHTXDOWRWKHDGMDFHQW

cabinet’s toekick height.

3. The clearance between the countertop and the top

RIWKHLFHPDFKLQHVKRXOGEHDWOHDVW´

4. Subtract the toekick height and the clearance from

the opening height to determine the height of your

custom door panel.

5. Cut the panel to the specified width and height.

6. Determine the top of the panel. Measure and mark

hole locations.

7. Drill pilot holes on the back of the panel at your

PDUNLQJV8VHDGULOOVWRSWRSUHYHQWGULOOLQJ

through the panel.

Cabinet

opening

´RUJUHDWHU

clearance

Toekick

height

´

´

´

´

´

´

´

Centerline

´

´

´

´

୉´

TYP 

´

Installation Instructions

INSTALLATION INSTRUCTIONS

49-60744 Rev. 7 13

INSTALLING THE DOOR PANEL (Cont)

If the door swing is going to be changed please complete prior to installing the door panel. See page 11.

Depending on the door kit being installed, the door handle may need to be flipped if the door swing is being

changed. Please see instructions on page 14 on how to flip the door handle.

Attaching the Door Panel

The panel will be held on by 6 sheet metal screws and

2 machine screws.

1. Remove the gasket from the inside of the door and

retain for later use.

2. Remove any plastic covering the stainless steel

panel.

3. Place the door panel onto the outside of the door

and secure it with 2 machine screws in the left

center and right center of the door.

)DVWHQWKHSDQHOWRWKHGRRUXVLQJWKHVKHHW

metal screws. In the hinge opening area opposite

the hinge side, use the outermost screw holes only.

5. Place the covers over the hinge opening areas and

secure each cover to the door using a sheet metal

screw and washer.

6. Insert hole plug over screw installed in step 5.

7. Return the gasket to its original position.

$WWDFKWKHGRRUWRWKHFDELQHWXVLQJWKHRULJLQDO

screws.

IMPORTANT: In some situations the door can open

too far and damage adjacent cabinets. To prevent

WKLVLQVHUWD6WRS3LQLQKDUGZDUHSDFNHWLQWRWKH

provided hole in the top and bottom hinges. Drive the

pin into the hole until the head is flush with the hinge.

9. Slide the hinge covers from the hardware packet

over each hinge.

$WWDFKWKHVLGHFRYHUVIURPWKHKDUGZDUHSDFNHW

over the hinge by peeling off the covering over the

adhesive and placing it over the side of the hinge.

Note: If the unit is being built-in a screw can be

used

to

secure the unit to the cabinet in place of installing

the side covers.

11. Return the kickplate and front service panel to

their original positions and attach to the cabinet

using the original screws.

Hinge Cover

Side Cover

Gasket

Machine

Screw

Door

Panel

8VH833(5

hole at the top

Hole Plug

Cover

8VH/2:(5

hole at the

bottom

Stop

Installation Instructions

INSTALLATION INSTRUCTIONS

14 49-60744 Rev. 7

PLUMBING - DRAIN PUMP

Drain Installation

A drain pump is available for this ice machine. The

GUDLQSXPSNLWQXPEHULV83.DQGLVDYDLODEOHDW

GEApplianceparts.com or by calling GE

Appliances at ,Q&DQDGDYLVLW

GEAppliances.caRUFDOO

PLUMBING - GRAVITY DRAIN

Drain Installation

NOTICE

Restrictions in the drain

system to the machine will cause water to back

up into the ice storage bin and melt the ice.

Gravity drain tubing must be vented, have no

kinks, and slope to the building drain. Air gaps

are typically required by local codes.

1. Place the ice machine in front of the installation

opening. Adjust leveling legs to the approximate

KHLJKW7KHUHDUH/HJ&DSVLQWKHKDUGZDUH

packet that can snap onto the leveling legs if

they are going to show when the unit is level.

2. Insert drain tube through the routing hole in the

back panel.

3. Remove the upper back panel if needed for

access to drain connection.

NOTE: If the drain opening has been located in the

floor under the base pan according to the pre install

specifications, follow steps 4 through 7 to drain the

unit through the base. If not, proceed to step 7.

Drain tubing

inside cabinet

Installation Instructions

INSTALLATION INSTRUCTIONS

HANDLE REVERSING INSTRUCTIONS

1. Remove the allen wrench from the panel

installation screw kit envelope

/RRVHQWKHVHWVFUHZXVLQJWKHDOOHQZUHQFK

Remove the handle and flip it around so the logo is

facing the other way.

3. Place the handle caps over the fasteners of the

door. Take care to support the handle so it doesn’t

fall and scratch the appliance finish. Make sure

both handle caps are resting on the face of the

door.

/RFNRQHHQGRIWKHKDQGOHLQWRSRVLWLRQE\

tightening the set screw in the handle cap with the

allen wrench provided. DO NOT over-tighten.

.HHSVXSSRUWLQJWKHKDQGOHDV\RXORFNWKHRWKHU

end of the handle into position by tightening the set

screw in the handle cap. DO NOT over-tighten.

LOOSEN

set screw

fastener

handle cap

set screw

49-60744 Rev. 7 15

PLUMBING - GRAVITY DRAIN (cont)

4. Remove the clamp and barbed elbow and take

off the plastic cover in the base pan below the

drain hose.

&RQQHFWDVWUDLJKWEDUEHGFRQQHFWRUWR

the drain hose, securing with the supplied hose

clamp.

&XWDQSLHFHRI2'[2'W\JRQ

FOHDUSODVWLFWXELQJ6OLGHRQHHQGRIWKHWXEH

RQWRWKHFODPS/HDYHWKHRWKHUHQGRIWKHWXEH

lying on the floor of the base pan until the unit is

positioned over the floor drain.

5RXWHWKHGUDLQWXEH(LWKHUDLQVHUWWKHGUDLQ

tube through the base pan into the floor drain or

EURXWHWKHGUDLQWXEHWKURXJKWKHKROHLQWKH

lower back panel and connect to barbed elbow

and secure with clamp.

5HLQVWDOODQ\SDQHOVUHPRYHGWRFRQQHFWWKH

drain.

Water Supply

7KHUHFRPPHQGHGZDWHUVXSSO\WXELQJLV2'

FRSSHU6WDLQOHVVVWHHOIOH[RUUHLQIRUFHG3&9WXEH

may also be used. Install an easily accessible shut-

off valve between the supply and the unit. This shut-

off valve should not be installed behind the unit.

The water connection is at the back of the cabinet.

Connect using a compression fitting, one is supplied

tied to the water inlet tube at the back of the cabinet.

When built in: Coil enough tubing behind the

machine so it can be pushed into the cavity without

kinking the tubing.

Connect water supply here, fitting is

supplied in bag tied to tube.

Installation Instructions

PLACEMENT OF THE ICE MACHINE

The ice machine is supplied with a power cord.

Do not remove the grounding pin from the cord's

SOXJ'RQRWXVHH[WHQVLRQFRUGV)ROORZDOOFRGHV

Connect the machine so its own 115v, 15amp

circuit.

1. If the electrical outlet for the ice maker is behind

the unit, plug it into the unit.

2. Position the unit in the installation opening.

3. Turn on the water supply. Make sure that the

icemaker is plugged in and the power is on.

4. Slide the unit into the installation opening, paying

special attention to water supply and drain

connections. Do not kink!

5. Pour a couple of quarts of water into the ice

VWRUDJHELQRQGUDLQSXPSHTXLSSHGPDFKLQHV

the drain pump should start and water should

pump out. Check for leaks.

6. Replace the service access panel.

/HYHOWKHXQLWDVQHHGHG7KHUHDUH/HJ&DSV

in the hardware packet that can snap onto the

leveling legs if they are going to show when the

unit is level.

16 49-60744 Rev. 7

Cleaning the Outside

The stainless steel door and door handle can be

cleaned with a commercially available stainless steel

FOHDQHU&OHDQHUVZLWKR[DOLFDFLGVXFKDV%DU.HHSHUV

)ULHQG6RIW&OHDQVHUZLOOUHPRYHVXUIDFHUXVWWDUQLVK

and small blemishes.

8VHRQO\DOLTXLGFOHDQVHUIUHHRIJULWDQGUXELQWKH

direction of the brush lines with a damp soft sponge. Do

not use appliance wax or polish on the stainless steel.

Cleaning the Condenser

The condenser has fins and tubes that can become

clogged with dirt and lint.

To clean:

1. Remove the kickplate and front service panel.

2./RFDWHWKHFRQGHQVHUVXUIDFH

3.9DFXXPWKHVXUIDFHWRUHPRYHDOOGXVWDQGOLQW

NOTICE

Do not dent the fins.

4. Return the kickplate and front service panel to their

RULJLQDOSRVLWLRQV)DVWHQWKHPWRWKHFDELQHWXVLQJ

the original screws.

Removing Scale from the Ice Making System

Cleaning the ice machine involves adding a solution

of scale remover and water to the ice machine and

continuing to add it as it makes ice. The scale remover

must be diluted to the correct ratio. A squirt bottle will

make adding the scale remover much easier when the

unit is built in. If not built in, remove the top panel for

reservoir access.

You should use rubber gloves when using the

scale remover. To order scale remover, go to

GEApplianceParts.comRUFDOO2UGHU

SDUWQXPEHU:;;

1. Scoop out and discard all of the ice.

2. Press and release the ON/OFF button.

3. Open door and locate screws at the upper back wall

of the bin. Remove the 2 screws.

4. Remove the back panel of the bin by lowering it

down past the scoop holder. The scoop holder will

rotate to allow the panel to lower.

 :DWHUVKXWRIIIORDWYDOYHLVORFDWHGDWWKHEDFNRI

WKHUHVHUYRLU7KHYDOYH0867EHWXUQHGWRWKHOFF

position before the reservoir cover can be removed.

7XUQNQRE&&:

Condenser surface

POWER

ON/OFF

CLEAN

RESET

TIME TO

CLEAN

CHECK

WATER

ICE

MAKING

Remove screws

Reservoir cover

release tab

Care And Cleaning

Water

Shutoff

IORDW

9DOYH

VKRZQLQ

WKH2))

SRVLWLRQ

Tab to Release

CARE AND CLEANING

49-60744 Rev. 7 17

Care And Cleaning

CARE AND CLEANING

6. Push tab on front edge of reservoir cover and

remove the cover. NOTE: Adjacent wires are low

YROWDJHDQGDUHQRWKD]DUGRXV

 /RFDWHWKHGUDLQSOXJ3XOOWKHGUDLQSOXJRXWWR

drain the reservoir and evaporator. When draining is

complete, return the plug to its original position.

 2EWDLQSUHPL[HGVFDOHUHPRYHUVROXWLRQRUPL[D

solution of scale remover with water according to the

GLUHFWLRQV)LOODR]VTXLUWERWWOHZLWKWKHGLOXWHGRU

pre-mixed scale remover.

NOTE: Take care not to spill any scale remover on

nearby surfaces. Immediately wipe any spill with

backing soda and water.

 )LOOWKHUHVHUYRLUZLWKWKHVFDOHUHPRYHUVROXWLRQIURP

WKHVTXLUWERWWOH8VHDERXWKDOIR]RIWKHVROXWLRQ

3UHVVDQG+2/'ERWKWKHCLEAN/RESET and ON/

OFF buttons for 5 seconds. The TIME TO CLEAN

light will blink on and off.

7KHDXJHUPRWRUZLOOUXQIRUPLQXWHVDQGWKHQ

WKHFRPSUHVVRUZLOOVWDUW:LWKLQPLQXWHVWKH

machine will start to make ice. The TIME TO

CLEAN light will glow steady until the clean cycle is

complete.

CAUTION

Keep fingers away from moving

parts.

After the ice making starts, continuously add scale

remover solution to the reservoir to keep it about half

full.

:KHQDOOR]RIWKHVROXWLRQLVXVHGWXUQWKHZDWHU

VKXWRIIIORDWYDOYHNQRE&:WRWKHON position.

$IWHUPLQXWHVWKHLFHPDFKLQHDQGDOOWKHFRQWURO

panel lights will shut off.

12. Pull the drain plug again to drain the system and

then replace it.

Removing Scale from the Ice Making System (Cont.)

POWER

ON/OFF

CLEAN

RESET

TIME TO

CLEAN

CHECK

WATER

ICE

MAKING

WARNING

Ice machine scale remover contains acids.

Acids can cause burns.

If concentrated cleaner comes in contact with skin,

ÀXVKZLWKZDWHU,IVZDOORZHGGR127LQGXFH

vomiting. Drink large amounts of water or milk. Call

3K\VLFLDQLPPHGLDWHO\.HHSRXWRIWKHUHDFKRI

children.

POWER

ON/OFF

CLEAN

RESET

TIME TO

CLEAN

CHECK

WATER

ICE

MAKING

Press both

POWER

ON/OFF

CLEAN

RESET

TIME TO

CLEAN

CHECK

WATER

ICE

MAKING

Water Shutoff

IORDW9DOYH

VKRZQLQWKH

21SRVLWLRQ

 49-60744 Rev. 7

Care And Cleaning

7XUQWKH:DWHU6KXW2II)ORDW9DOYHNQREWRWKH2II

position, replace the reservoir cover, and then turn

WKH:DWHU6KXW2II)ORDW9DOYHNQREEDFNWRWKH2Q

position.

14. Replace the upper back wall of the bin using the

original screws. Push in to snap bottom of back

panel into place.

3RXUDJDOORQRIKRW)ZDWHULQWRWKH

bin to flush out the drain and melt all ice that was

made during the cleaning process. Be sure all ice is

melted.

8VHDQ\OHIWRYHUVFDOHUHPRYHUVROXWLRQWRVFUXE

the scale off of the bin liner. If none is left over, use

pre-mixed or mix 1 quart according to the directions.

17. Rinse the liner with hot water.

6DQLWL]HWKHELQLQWHULRU

3XVKDQGUHOHDVHWKH212))EXWWRQWRUHVWDUWLFH

making.

The ice scoop should be washed regularly and is

dishwasher safe.

Other Maintenance

NOTE: It is no

rmal for some lime scale to form on the

gear reducer cover. Wipe up any loose scale.

Check the top bearing.

The top bearing is non-metallic and requires no

lubrication. However, it should be checked for wear

occasionally. The top of panel must be remove

d to

DFFHVVWKHEHDULQJ7KHZHDUOLPLWLVDQGFDQEH

checked with a pin gauge.

Removing Scale from the Ice Making System (Cont.)

Winterizing

1. Clean the ice making system per the instructions on

SDJHVDQG

2SHQWKHGRRUDQGSXVKWKH212))EXWWRQWRWXUQ

the ice machine off.

3. Turn off the water supply.

4. Remove the back wall of the ice storage bin.

5. Remove the drain plug and drain the water reservoir

return plug to its original position.

6. Models with a drain pump installed should have about

JDOORQRI59DQWLIUHH]HSURS\OHQHJO\FROSRXUHG

into the ice storage bin drain.

NOTE: $XWRPRWLYHDQWLIUHH]HPXVW127EHXVHG

7. Turn off and unplug the machine.

CARE AND CLEANING

49-60744 Rev. 7 19

Problem Possible Causes What to Do

Low capacity Restricted drain or standing water in

the bin

Clean the air cooled condenser fins.

Clean the ice making system.

Check the drain line for kinks

No ice 6ZLWFKLV2)) Press the ON/OFF button to turn the

power on.

Electric breaker has been tripped )OLSWKHHOHFWULFEUHDNHUEDFNRQ

Water supply is low If the Check Water light is flashing

Red, the water supply is low.

Auger motor is not working or is

RYHUORDGHGOLJKWVDUHÀDVKLQJ

Reset by pressing ON/OFF button. If

this doesn't reset the motor and the

lights continue to flash, call for service.

Time to Clean light is on Clean the ice making system following

directions in the Care and Cleaning

section.

Noise

The ice machine is designed for quiet operation but will

make some noise during the ice making cycle.

Troubleshooting Tips... Before you call for service

Save time and money! Review the charts on the following pages first and you may not need to call for service.

TROUBLESHOOTING TIPS

 49-60744 Rev. 7

Ŷ Service trips to your home to teach you how to use the

product.

Ŷ Improper installation, delivery or maintenance.

Ŷ)DLOXUHRIWKHSURGXFWLILWLVDEXVHGPLVXVHGRU

used for other than the intended purpose or used

commercially.

Ŷ Replacement of house fuses or resetting of circuit

breakers.

Ŷ Damage caused after delivery.

Ŷ Replacement of the light bulbs, if included.

Ŷ Damage to the product caused by accident, fire, floods

or acts of God.

Ŷ Incidental or consequential damage caused by

possible defects with this appliance.

Ŷ Product not accessible to provide required service.

What GE Appliances Will Not Cover:

For the Period of: GE Appliances Will Replace

One Year

)URPWKHGDWHRIWKH

original purchase

Any part of the ice machine which fails due to a defect in materials or workmanship.

During the limited one-year warranty, GE Appliances will also provide, free of charge, all labor

and related service to replace the defective part.

)LYH<HDUV

)URPWKHGDWHRIWKH

original purchase

Any part of the sealed refrigeration systemWKHFRPSUHVVRUFRQGHQVHUHYDSRUDWRUDQGDOO

FRQQHFWLQJWXELQJZKLFKIDLOVGXHWRDGHIHFWLQPDWHULDOVRUZRUNPDQVKLS

During the limited five-year sealed refrigerating system warranty, GE Appliances will also

provide, free of charge, all labor and related service to replace the defective part in the sealed

refrigerating system.

Staple your receipt here. Proof of the original purchase

date is needed to obtain service under the warranty.

GEAppliances.com

$OOZDUUDQW\VHUYLFHLVSURYLGHGE\RXU)DFWRU\6HUYLFH&HQWHUVRUDQDXWKRUL]HG&XVWRPHU&DUH

®

technician. To schedule

service online, visit us at geappliances.com/serviceRUFDOO*($SSOLDQFHVDW*(&$5(63OHDVH

have your serial number and your model number available when calling for service. In Canada, visit

GEAppliances.ca/en/support/service-requestRUFDOO

GE Appliances Ice Machine Limited Warranty

EXCLUSION OF IMPLIED WARRANTIES

<RXUVROHDQGH[FOXVLYHUHPHG\LVSURGXFWUHSDLUDVSURYLGHGLQWKLV/LPLWHG:DUUDQW\$Q\LPSOLHGZDUUDQWLHV

including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or

the shortest period allowed by law.

For US Customers: This limited warranty is extended to the original purchaser and any succeeding owner for products

SXUFKDVHGIRUKRPHXVHZLWKLQWKH86$,IWKHSURGXFWLVORFDWHGLQDQDUHDZKHUHVHUYLFHE\D*($SSOLDQFHV$XWKRUL]HG

Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an

$XWKRUL]HG*($SSOLDQFHV6HUYLFHORFDWLRQIRUVHUYLFH,Q$ODVNDWKHOLPLWHGZDUUDQW\H[FOXGHVWKHFRVWRIVKLSSLQJRU

service calls to your home.

Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty

gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your

legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: GE Appliances, a Haier company

Louisville, KY 40225

For Customers in Canada: This limited warranty is extended to the original purchaser and any succeeding owner

for products purchased in Canada for home use within Canada. In-home warrant service will be provided in areas

where it is available and deemed reasonable by Mabe to provide.

Warrantor Canada: MC Commercial, Inc., Burlington, Ontario, L7R 5B6

LIMITED WARRANTY

La page charge ...

GE UNC15NJII Mode d'emploi

GE UNC15NJII Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents