Legrand V4010DFO Guide d'installation

Taper
Guide d'installation
Wiremold
®
Electrical Systems conform with, and should be
installed and properly grounded in compliance with requirements of
the current National Electrical Code or codes administered by local
authorities. All electrical products may represent a possible shock
or fire hazard if improperly installed or used. Wiremold electrical
products are UL Listed, made for interior use and should be
installed by qualified electrical professionals in conformance with
current local codes and/or the National Electrical Code.
4000 Two-Piece Metal Raceway
INSTALLATION INSTRUCTIONS
Use #8 (5/16", [7.9mm] head size) flat head fastener or equivalent to mount base to surface.
Utiliser une à tête plate de calibre 8 (tête de 7.9mm, 5/16" po.) ou une fixation équivalente pour assujettir le tube guide-fils et les raccords a la surface de montage.
Use un sujetador de cabeza plana No.8 (tamaño de cabeza: 7.9mm, 5/16" de pulgada) o su equivalente para unir la canalita y los accesorios a la superficie de montaje.
4010DFO FiberReady
Entrance End Fitting
1 2
3
4
© Copyright 2000 The Wiremold Company All Rights Reserved • 60 Woodlawn Street, West Hartford, CT 06110 • 1-800-621-0049 • Fax 860-232-2062 www.wiremold.com 41948 1100
  • Page 1 1

Legrand V4010DFO Guide d'installation

Taper
Guide d'installation

dans d''autres langues