Wiremold 4001DA Guide d'installation

Marque: Wiremold

Modèle: 4001DA

Taper: Guide d'installation

Wiremold

Electrical Systems conform with, and should be

installed and properly grounded in compliance with requirements of

the current National Electrical Code or codes administered by local

authorities. All electrical products may represent a possible shock

or fire hazard if improperly installed or used. Wiremold electrical

products are UL Listed, made for interior use and should be

installed by qualified electrical professionals in conformance with

current local codes and/or the National Electrical Code.

4000 Two-Piece Metal Raceway

INSTALLATION INSTRUCTIONS

Use #8 (5/16", [7.9mm] head size) flat head fastener or equivalent to mount base to surface.

Utiliser une à tête plate de calibre 8 (tête de 7.9mm, 5/16" po.) ou une fixation équivalente pour assujettir le tube guide-fils et les raccords a la surface de montage.

Use un sujetador de cabeza plana No.8 (tamaño de cabeza: 7.9mm, 5/16" de pulgada) o su equivalente para unir la canalita y los accesorios a la superficie de montaje.

4010DFO FiberReady

™

Entrance End Fitting

1 2