Legrand HBEM3W High Bay Occupancy Sensor Mode d'emploi

Marque: Legrand

Modèle: HBEM3W High Bay Occupancy Sensor

Taper: Mode d'emploi

Ce manuel convient également à

Wattstopper

High Bay Occupancy Sensor Mounting Bracket Extender Module

for Wet Locations

Installation Instructions • Instructions d’Installation • Instrucciones de Instalación

No: 24121 – 09/16 rev. 1

Catalog Number • Numéro de Catalogue • Número de Catálogo: HBEM3W

Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China

SPECIFICATIONS

Maximum extension ..................................................................... 4.75” (120mm)

Parts included:

2 chase nipples, 2 nuts, rubber washer,

1 knockout cover

Chase nipple inner diameter .......................................................... 0.63” (16mm)

Threaded outside diameter .................................................... 0.82” (20mm)

DESCRIPTION AND OPERATION

The HBEM3W Extender Module allows

you to attach an HB3xxW series IP65

compliant occupancy sensor to the side

of a wet location light fixture.

The HBEM3W includes two chase

nipples; one for use with the HB340W

and one for all other models. One end

of the nipple snaps into the extender

housing. The other end fits into a

watertight fixture enclosure with a

standard knockout. A rubber washer

fits between the outside flange of the

nipple and the outside of the fixture. The

included nut tightens against the inside

wall of the fixture enclosure to secure the

nipple and rubber washer.

The extender module snaps apart to allow threading the wiring cable

through it and into the fixture for connection.

The extender housing is not watertight, but the inner flange rings on the

nipple and the HB3xxW housing fit into grooved rubber rings on the cable

to keep moisture from entering the fixture and sensor at those locations.

WARNING: TURN THE POWER OFF AT THE

CIRCUIT BREAKER BEFORE WIRING.

Wet location

light fixture

(supplied by others)

HB3xxW sensor

HBEM3W

Extender

housing

Chase nipple

Threaded nut

Rubber washer

INSTALLATION

Assemble the HBEM3W to the HB3xxW series sensor and to the light

fixture as shown in the illustrations.

Note the grooved rubber ring on the sensor cable. Ensure you have

selected the correct nipple for your sensor. Make sure that when the

cable is threaded through the chase nipple, the slot is seated on

either side of the flange ring inside the chase nipple, as shown

in the explolded view. When properly seated, using

moderate force you should not be able to pull the cable out

of the nipple from either end.

Slide blade under tabs located

in 3 places. Gently pry apart.

HB3xxW sensor

HBEM3W

Extender

housing

Threaded nut

(comes with sensor)

Rubber washer

Cable

Chase nipple

Cable

Threaded nut

Grooved

rubber ring

Inner

flange ring

Threaded

nut

800.879.8585

www.legrand.us/wattstopper

No. 24121 – 09/16 rev. 1

Wattstopper warranties its products to be free

of defects in materials and workmanship for a

period of five (5) years. There are no obligations

or liabilities on the part of Wattstopper for

consequential damages arising out of, or in

connection with, the use or performance of this

product or other indirect damages with respect

to loss of property, revenue or profit, or cost of

removal, installation or reinstallation.

Wattstopper garantit que ses produits sont

exempts de défauts de matériaux et de fabrication

pour une période de cinq (5) ans. Wattstopper

ne peut être tenu responsable de tout dommage

consécutif causé par ou lié à l’utilisation ou

à la performance de ce produit ou tout autre

dommage indirect lié à la perte de propriété, de

revenus, ou de profits, ou aux coûts d’enlèvement,

d’installation ou de réinstallation.

Wattstopper garantiza que sus productos

están libres de defectos en materiales y mano

de obra por un período de cinco (5) años. No

existen obligaciones ni responsabilidades por

parte de Wattstopper por daños consecuentes

que se deriven o estén relacionados con el

uso o el rendimiento de este producto u otros

daños indirectos con respecto a la pérdida

de propiedad, renta o ganancias, o al costo

de extracción, instalación o reinstalación.

WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA

Legrand HBEM3W High Bay Occupancy Sensor Mode d'emploi

Marque: Legrand

Modèle: HBEM3W High Bay Occupancy Sensor

Taper: Mode d'emploi

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Legrand HBEM3W High Bay Occupancy Sensor Operating instructions

Legrand HBEM3W High Bay Occupancy Sensor Mode d'emploi

Ce manuel convient également à

Legrand HBEM3W High Bay Occupancy Sensor Mode d'emploi

dans d''autres langues

Documents connexes