1
Installation Instructions for
Palmyra Chandelier
1.0
F3230-8-F3231-12-F3234-3
Chandelier
F3230/8, F3231/12, F3234/3
1
2
1A
3
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
Install the candle tubes by sliding them over the sockets.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Feed the cord through the long threaded pipe, pipe cover, and washers in the order shown, then screw the pipe onto the
fixture and slide the rest of the parts down over the pipe.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
Install the shades by sliding them through the shade holders and onto the shade bases.
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. version may be dimmed with a dimmer. ConsultLED LED
lamp manufacturer for additional information.
This instruction shows a typical installation.
5
LAMP
CANDLE TUBE
SHADE HOLDER
4
2
1
SOCKET
SHADE BASE
CANDLE FOLLOWER
SHADE
LONG THREADED PIPE
PIPE COVER
WASHERS
5
6
3
6