Chief FCAVCA Guide d'installation

Catégorie
Mur
Taper
Guide d'installation
I N S T A L L A T I O N I N S T R U C T I O N S
(with TS118)
Variable Column Display Interface
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FCAVCA
FCAVCA Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure al accessories are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this accessories can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to accessory does not exceed the
weight limit of the mount to which it is attached.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this accessory outdoors.
IMPORTANT ! :
The FCAVCA
accessory
is designed to be
mounted to a truss column using the FCAVCSU80 8" square U-
bolts accessory or a pole column using the FCAVCSU20 2"
clamping U-bolts accessory.
--SAVE THESE INSTRUCTIONS--
Installation Instructions FCAVCA
3
DIMENSIONS
ACCOMODATES SQUARE
FCAVCA Installation Instructions
4
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Adjust
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
Remove
Quitar
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Optional
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Installation Instructions FCAVCA
5
TOOLS REQUIRED FOR INSTALLATION
PARTS
1/2" (12.7mm)
3/16" (included)
5/32" (included)
C (1)
[Mounting plate]
Hardware bag (A section)
AA (4)
[5/16-18 cage nut]
AB (4)
Hardware bag (B section)
5/16-18 x 7/8"
AC (4)
.750x.350.x060
BA (2)
[1/4-20 cage nut]
BB (2)
1/4-20 x 7/8"
BC (2)
.563x.280x.060
AD (1)
3/16"
BD (1)
5/32"
FCAVCA Installation Instructions
6
Assembly And Installation
1. Install cage nuts (AA or BA) to appropriate holes on
mounting plate (C) depending on what mount will be
installed. (See Figure 1)
Figure 1
2. Install mounting plate (C) onto column or pipe referring to
installation instructions for (FCAVCSU80 or FCAVCSU20)
mounting accessory.
Thinstall Mounts (TS118/218/318) and FMSWM
NOTE: If installing to MTMS1U/MTMP1U/MTM1U/MSM1U/
LTM1U/LSM1U, proceed to MTMS1U/MTMP1U/
MTM1U/MSM1U/LTM1U/LSM1U section.
3. Loosely install appropriate hardware (AA and AB) or (BA
and BB) to upper cage nut installed in Step 1. (See Figure
2) or (See Figure 3) or (See Figure 4) or (See Figure 5)
4. Hang mount onto loosely installed screw and tighten screw.
(See Figure 2) or (See Figure 3) or (See Figure 4) or (See
Figure 5)
5. Use appropriate hardware (AA and AB) or (BA and BB) to
secure mount to lower cage nut installed in Step 1. (See
Figure 2) or (See Figure 3) or (See Figure 4) or (See Figure
5)
Figure 2
Figure 3
MTMS1U
MTMP1U/MTM1U/MSM1U
TS118SU
TS218SU
TS318SU
(BA) x 2
(AA) x 2 (AA) x 4
FMSWM
(AA) X 4 (AA) X 2
LTM1U/LSM1U
TS118SU
3
(BB)
(BC)
4
5
(BB)
(BC)
TS218SU
3
(BB)
4
(BC)
(BC)
5
(BB)
Installation Instructions FCAVCA
7
Figure 4
Figure 5
MTMS1U/MTMP1U/MTM1U/MSM1U/LTM1U/LSM1U
6. Use two or four 5/16-18 x 7/8" button head cap screws (AA)
and two or four .750x.350x.060 spacers (AB) to secure
mount to top cage nuts installed in Step 1. (See Figure 6) or
(See Figure 7)
Figure 6
Figure 7
7. Install display to mount following installation instructions for
each mount.
TS318SU
(AC)
5
(AB)
3
(AB)
4
(AC)
FMSWM
(AC)
5
(AB)
3
(AB)
4
(AC)
MTMS1U
6
(AB) x 4
(AC) x 4
MTMP1U/MTM1U/MSM1U
6
(AB) x 4
(AC) x 4
LTM1U/LSM1U
(MTMP1U shown)
FCAVCA Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
8800-003120 Rev01
2020 Legrand | AV
www.legrandav.com
03/20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chief FCAVCA Guide d'installation

Catégorie
Mur
Taper
Guide d'installation

dans d''autres langues