Datapath VisionSC-SDI4 Mode d'emploi

Marque: Datapath

Modèle: VisionSC-SDI4

Taper: Mode d'emploi

User Guide

Version 1.0.4

VisionSC-SDI4

Contents

Safety Instructions........................................................................................................................................1

FCC Statement...............................................................................................................................................2

Introduction........................................................................................................................................................3

Hardware Overview.....................................................................................................................................4

Software Overview.......................................................................................................................................5

Specification......................................................................................................................................................7

Unpacking..........................................................................................................................................................8

Installing the Capture Card.....................................................................................................................9

Installing Multiple Cards..........................................................................................................................10

Firmware Upgrades ................................................................................................................................11

Software Installation.................................................................................................................................12

Datapath Limited........................................................................................................................................13

Index.....................................................................................................................................................................14

Safety Instructions (UK)

To prevent damage to your Datapath product or injury to personnel operating the

equipment, please read the following safety precautions prior to operation. These

instructions should be made available to all those who will use and operate Datapath

products.

Power Supply

All Datapath products require a mains power supply. This power supply must be

disconnected when equipment is being upgraded or relocated.

Cables

Do not expose cables to any liquids; doing so may cause a short circuit which could

damage the equipment. Do not place heavy objects on top of any cables as this can

cause damage and possibly lead to exposed live wires.

Ventilation

All computer equipment should be located in a well ventilated area. All ventilation

holes on the computer casing must be kept clear of any obstruction at all times.

Failure to do so will result in the system over heating and damaging your equipment.

Working Environment

The equipment should be located in an environment free from dust, moisture and

extreme changes in temperature and should be placed on a stable and solid work

surface. Liquids (hot/cold drinks etc) should not be placed near the equipment as

spillage could cause serious damage.

Gas/Flammable Liquids

Electronic equipment should never be used in the presence of gas or any ammable

liquid, doing so could result in an explosion or serious re.

Smoke/Unusual Smells

Should you notice smoke or unusual smells being emitted from your computer, turn

o and unplug the system from the mains supply. The system should then be passed

to a qualied technician for inspection. Continued operation could result in personal

injury and damage to property.

Maintenance

Maintenance should only be carried out by competent technicians, any Datapath

plug-in cards that are physically damaged should be returned to Datapath for repair

using Datapath RMA procedures.

Disposal

At the end of life all Datapath products should be disposed of as per local laws and

regulations dictate. In UK contact Datapath to arrange disposal. Our WEE registration

number is WEEE/AA0005ZR.

Consignes de sécurité (Fr)

An de ne pas endommager votre produit Datapath et d’éviter tout risque de blessure

du personnel exploitant le matériel, veuillez lire les consignes de sécurité suivantes

avant toute utilisation. Ces instructions doivent être mises à disposition de toute per-

sonne souhaitant utiliser et exploiter les produits Datapath.

Alimentation électrique

Tous les produits Datapath requièrent une alimentation électrique principale. Cette

alimentation électrique doit être interrompue en cas de mise à jour ou de relocalisation

du matériel.

Câbles

Ne pas exposer les câbles à un liquide quelconque car cela pourrait provoquer un court-

circuit susceptible d’endommager le matériel.

Ne pas placer d’objets lourds sur les câbles car cela pourrait causer des dommages et

conduire éventuellement à des ls électriques dénudés.

Ventilation

Tout matériel informatique doit être disposé dans un endroit bien ventilé. Veiller à ne

jamais obstruer les orices de ventilation du boîtier de l’ordinateur ; sinon, il y a risque

de surchaue du système et votre matériel peut être endommagé.

Environnement de travail

Le matériel doit être placé sur une surface de travail stable et solide, dans un environne-

ment exempt de poussière et d’humidité et non exposé à des variations extrêmes de

températures. Ne pas placer de liquides (boissons chaudes/froides, etc.) près du maté-

riel, car un déversement accidentel pourrait causer de graves dommages.

Gaz/Liquides inammables

Le matériel électronique ne doit jamais être utilisé en présence de gaz ou de liquide

inammable ; cela pourrait entraîner une explosion ou un grave incendie.

Fumée/odeurs inhabituelles

Si vous constatez la présence de fumée ou d’odeurs inhabituelles émanant de votre

ordinateur, éteignez-le et débranchez le système de l’alimentation secteur. Dans ce

cas, le système devra être coné à un technicien qualié pour inspection. Une poursuite

de son utilisation risquerait de provoquer des blessures corporelles et des dommages

matériels.

Entretien

L’entretien doit impérativement être eectué par des techniciens compétents, toute

carte enchable Datapath physiquement endommagée est à retourner à Datapath pour

réparation via la procédure Datapath RMA.

Élimination

En n de vie, tous les produits Datapath seront éliminés conformément aux législa-

tions et réglementations locales. Au Royaume-Uni, veuillez contacter Datapath pour

organiser l’élimination. Notre numéro d’enregistrement de Déchets d’équipements

électriques et électroniques : WEEE/AA0005ZR.

Sicherheitsanweisungen (D)

Die folgenden Sicherheitsanweisungen dienen der Vermeidung von Schäden an Ihrem

Datapath-Produkt und Verletzungen der Nutzer. Bitte lesen Sie sie sorgfältig durch,

bevor Sie Ihr Produkt in Betrieb nehmen. Diese Anweisungen sollten allen Personen

zugänglich gemacht werden, die mit der Nutzung und der Bedienung von Datapath-

Produkten betraut sind.

Stromversorgung

Alle Datapath-Produkte müssen an die Hauptstromversorgung angeschlossen werden.

Die Stromversorgung muss unterbrochen werden, wenn Geräte ausgetauscht oder an

einer anderen Stelle platziert werden sollen.

Kabel

Kabel dürfen nicht mit Flüssigkeiten in Berührung kommen, da dadurch ein Kurzschluss

und somit ein Schaden an dem Gerät ausgelöst werden könnte. Stellen Sie außerdem

keine schweren Objekte auf die Kabel, um Schäden und oen liegende stromführende

Leitungen zu vermeiden.

Lüftung

Computerausrüstung sollte in einem gut gelüfteten Bereich aufgestellt werden. Die

Lüftungslöcher am Computergehäuse müssen stets freigehalten werden, um eine

Überhitzung und somit einen Geräteschaden zu vermeiden.

Arbeitsumgebung

Die Geräte sollten in einer staubfreien und trockenen Umgebung, in der keine extremen

Temperaturänderungen zu erwarten sind, auf einer stabilen Arbeitsäche aufgestellt

werden. In der Nähe der Geräte sollten keine Flüssigkeiten (heiße/kalte Getränke etc.)

platziert werden, die verschüttet werden und schwerwiegende Schäden anrichten

könnten.

Gas/brennbare Flüssigkeiten

Elektronische Geräte sind nicht in Umgebungen zu verwenden, in denen Gas oder

brennbare Flüssigkeiten vorhanden ist/sind und somit Brand- und Explosionsgefahr

besteht.

Rauch/ungewöhnliche Gerüche

Schalten Sie das System aus und trennen Sie es von der Hauptversorgung, wenn von

Ihrem Computer Rauch ausgeht oder dieser ungewöhnliche Gerüche abgibt. Lassen Sie

das System anschließend von einem qualizierten Techniker prüfen. Bei fortgeführtem

Betrieb besteht die Gefahr von Verletzungen und Sachschäden.

Wartung

Wartungsarbeiten sollten nur von qualizierten Technikern durchgeführt werden.

Physisch beschädigte Plug-in-Karten von Datapath sollten zur Reparatur unter Einsatz

der RMA-Verfahren von Datapath an Datapath übergeben werden.

Entsorgung

Am Ende ihrer Nutzungsdauer sollten Datapath-Produkte gemäß den lokalen Gesetzen

und Bestimmungen entsorgt werden. Für Nutzer in Großbritannien: Bitte kontaktieren

Sie Datapath, um Vorkehrungen zur Entsorgung von Datapath-Produkten zu treen.

Unsere WEE-Registrierungsnummer lautet WEEE/AA0005ZR.

Instrucciones de seguridad (Esp)

Rogamos leer las siguientes instrucciones de seguridad antes de poner en funcionami-

ento el equipo, a n de evitar daños en su producto de Datapath o lesiones al personal

encargado de su manejo. Poner estas instrucciones a disposición de todos aquellos que

vayan a utilizar y/o manejar los productos de Datapath.

Alimentación eléctrica

Todos los productos de Datapath requieren una fuente de alimentación eléctrica.

Esta fuente de alimentación eléctrica debe ser desconectada durante las tareas de

renovación o traslado.

Cables

No exponer los cables a líquidos, ya que ello puede causar un cortocircuito y, por consi-

guiente, daños en el equipo. No colocar objetos pesados sobre los cables, ya que esto

puede ocasionar daños y poner al descubierto los cables vivos.

Ventilación

Todos los equipos informáticos deben estar situados en un área bien ventilada. Man-

tener todos los oricios de ventilación de la carcasa del ordenador siempre libres de

obstrucciones de cualquier tipo. En caso contrario, podría producirse un sobrecalen-

tamiento del sistema y daños en el equipo.

Entorno de trabajo

El equipo debe estar emplazado en un ambiente sin polvo, humedad ni cambios brus-

cos de temperatura y debe ser situado sobre una supercie estable y sólida. No colocar

líquidos (bebidas calientes/frías, etc.) cerca del equipo, ya que un derrame podría causar

graves daños.

Gas/líquidos inamables

El equipo electrónico nunca debe ser usado en presencia de gas o líquido inamable, ya

que esto podría causar una explosión o un incendio grave.

Humo/olores inusuales

En caso de percibir humo u olores inusuales provenientes de su ordenador, apagar y

desenchufar el equipo de la red eléctrica. El sistema debe ser conado entonces a un

técnico cualicado para su

inspección. Si el equipo continuara funcionando, esto podría ocasionar lesiones person-

ales y daños materiales.

Mantenimiento

El mantenimiento solo debe ser ejecutado por técnicos capacitados. Las tarjetas

insertables (plug-in) de Datapath que estén físicamente dañadas deben ser devueltas

a Datapath para su reparación según los procedimientos RMA (Return Merchandise

Agreement) de Datapath.

Eliminación

Al nal de su vida útil, todos los productos de Datapath deben ser eliminados de

acuerdo con las leyes y normativas locales. En el Reino Unido, contactar a Datapath

para organizar la eliminación. Nuestro número de registro WEE (Waste Electrical and

Electronic Equipment) es WEEE/AA0005ZR.

Safety Instructions

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limit are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction guide, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at their own expense.

Changes or modications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Introduction

Developed for capturing multiple High Denition SDI video signals, the VisionSC-SDI4 is the perfect

solution to AV professionals looking to capture from multiple sources. Ideal for use in broadcast

markets or with any SDI capable applications the VisionSC-SDI4 provides four 3G-SDI inputs each capable

of capturing 1920x1080p @ 60 frames per second (fps). Each capture channel is hardware time stamped

allowing for larger surfaces to be captured and stitched together. Developed as part of the VisionSC family

of capture cards, the VisionSC-SDI4 oers unmatched capture performance and reliability.

Key Features

LiveStream Technology

• Low latency video and audio capture minimizes the delay prior to post processing

MultiStream

• Open and independently control multiple instances of the same capture from a single input source

Powerful hardware scaler

• Adjust the incoming video size to your requirements

Text and bitmap overlay

• Overlay text and images onto the capture buer

Automatic video signal detection

• Accurate signal detection for all signal sources.

Hardware Overview

Four Channel 3G-SDI Video Capture Card

• Four independent 3G SDI capture channels

• Four channels of 1920 x 1080p 60fps capture

• Eight lane PCIe Gen.3 interface,

• Frame buer memory - 768 MB

• Single PCIe endpoint, allowing for more cards & captures to be placed within a single system.

Datapath Vision Performance Driver

Multiple cards per system, 16 streams per card

Frame sync and time stamping

Automatic signal detection

Direct Show interface

Datapath RGBEasy API

Models

VisionSC-SDI4 - 3G-SDI Video Capture Card

Fig. 2

Fig. 1

Software Overview

All Vision capture cards are supplied with a powerful software application for conguring the format of the

input sources and displaying the data.

Video Streaming

DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and

stream video over networks or the Internet:

• Microsoft Media Encoder®

• VLC

• VirtualDub

• Any other DirectShow encoding software

For streaming applications, Vision cards can be used with Windows Media Encoder to compress and

stream captured video. To replay the video, use Windows® Media Player.

Any application compatible with Windows® DirectShow technology can use Vision capture cards due to

their built-in WDM support.

Vision Software Capabilities

Timestamp support for streaming synchronisation:

• Synchronisation of multiple inputs across multiple cards

• Synchronise systems using network clock synchronisation

• For edge blending and other applications

Flexible and congurable EDID Management:

• Allows programming of custom EDID parameters for capture cards

Low Input to Output Capture Latency

DMA to third party graphics vendors back and front buers via Direct3D

• Compatibility with AMD DirectGMA

• Compatibility with Nvidia GPUDirect

User Mode lter for source selection

• Enables cropping support in DirectShow on all inputs

• Supports Start and Stop trigger interface on all Visi0n inputs

Datapath Unied Vision Driver

• Multiple cards per system, 16 streams per card

• Frame sync and time stamping

• DirectShow interface

• The RGBEasy API for advanced audio and video control

• Fully integrated for use with Datapath Wall Control software for video wall applications

Multistream

Datapath’s MultiStream feature is available on all Datapath capture cards and enables multiple

independently formatted video streams to be setup in parallel.

Each stream can be formatted completely independently and individual selection of resolution, colour

space, and cropping region can be set for each stream. This maximizes bandwidth utilisation of the

capture card PCIe interface, and also simplies development tasks for application developers who do not

need to implement video stream reformatting separately.

Vision Application Overview

The application displays the connected source in a window; it has the following features:

• Scales the data to t in the window

• Ability to set up sources accurately (settings automatically saved)

• Save a single frame to a le in one of the following formats:

BMP, JPEG, GIF, TIFF, PNG

• Print a single frame

• Maintain the aspect ratio of the displayed captured data

• Cropping

• Display text over the data (on-screen display)

• Command line interface

• Help le documenting all features

Note:

The supplied drivers and software require that you are using:

• Up to Windows® 8.1

• CD / DVD ROM Drive

Board Format PCI-Express x8 plug-in card, 110mm x 177mm (incl heat sync)

Connectors (main board) 4 BNC Connectors

Maximum Capture

Resolution

2.97Gbps capture bandwidth per channel.

Provides => 4 * 1920 x 1080p @ 60Hz.

Frame Buer 768MB

Input Mode Detection Supports SMPTE - 352 Payload Identiers

Sample Formats RGB: 4-4-4 (+A)

YUV: 4:2:2 (+A), 4:4:4 (+A)

SMPTE Standards ST-259, ST-272, ST-274, ST-291, ST-292, ST-293, ST-296,

ST-299, ST-352, ST-424, ST-425, ST-2048

Update Rate User dened. Captured frame rate will match the source

providing max data rate (2.9GB/s per channel) is not exceeded.

Multi-buered to eliminate tearing artefacts.

Video Modes 480i, 576i 720p, 1080i, 1080p,1080psF, 2048x1080p,

2048x1080psF

Supported Frame Rates 23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz & 60Hz

Audio Capture Embedded audio capture

Operating System Support Windows OS ® up to Win 8/8.1

Power Requirements Max current at +3.3 - 0.45A.

Max current at +12V - 0.85A

Max power ≈ 18W

Operating Temperature 0 to 35 ºC ( 32 to 96ºF)

Storage Temperature -20 to 70 ºC ( -4 to 158ºF)

Relative Humidity 5% to 90% non-condensing

Warranty 3 years

Specification

We are continuously developing the technology used within our product ranges delivering outstanding

innovative solutions, therefore the specication may change from time to time.

Unpacking

Your packing box should contain the following items:

• VisionSC-SDI4 - Four channel 3G-SDI video capture card

Note:

All plug-in cards are static sensitive and are packed in anti-static material. Please keep the card in its

packaging until you are ready to install.

It is recommended that you do not discard the packing box until you are completely satised with the

VisionSC-SDI4 capture card and it is fully installed and working correctly. We also recommend that

you make a note of the serial number of the card in a prominent place before the card is plugged into

the computer. This should hasten any query should you need to contact our Technical Support

Department. The serial number is displayed on the card itself and the box label.

Installing the Capture Card

You are likely to need a at blade and /or a cross head screwdriver for the installation of the

VisionSC-SDI4 card; it would be useful to have these to hand before you begin.

• Power down the PC (including peripherals), switch o at the mains and disconnect all the cables

connected to the computer, noting the positions for accurate re-connection

• Remove the PC cover

• Locate a vacant PCI Express slot (x4 or higher) on the motherboard and remove the blanking plate

(retain all screws) If you are in doubt consult your motherboard documentation to correctly identify a

PCI Express slot. If the card is forced into a 32 or 64 bit PCI or PCI-X slot it will be irreparably damaged

when the system is powered up and the warranty will be void.

• Reconnect all cables to the PC

• Power up the PC and commence the software installation

How to Connect Input Sources

The VisionSC-SDI4 card has four BNC type connectors for four separate, simultaneous inputs. The

connectors have green LED’s. Connect the cables distributing the video source signal to BNC input

connectors on the VisionSC-SDI4 capture card.

Fig. 3

When connecting BNC cables, ensure connectors are fully twisted and locked in place. Failure to lock the

connector can result in the BNC cable becoming separated from the card and the connection being lost.

Fig. 4

Cable Lengths

The VisionSC-SDI4 supports cable lengths of up to 150m for 3G-SDI. This gure is based on using low loss

coax cables (Belden 1694A). Avoid tight loops or kinks in the cables.

Multiple cards can be installed in a system providing a large number capture channels. Combinations of

Vision capture cards in the same machine are supported by the Vision driver.

In order to control the order in which the driver uses the cards, it is recommended when installing multiple

cards that the J5 links on the VisionSC-SDI4 are congured. The example below shows the jumper link

settings for up to 32 cards in a single system. When two cards share the same link settings, their order is

determined by the PCIe bus.

DirectShow

If you change the link ordering after installation you must run dplinks.exe. This program will update the

existing input names used by the windows DirectShow interface.

To run the dplinks program open the Run dialogue by clicking on Start/Run and type dplinks and then

press Enter.

The program will run, however no notications are displayed.

Fig. 5

Installing Multiple Cards

Firmware Upgrades

The VisionSC-SDI4 cards allow rmware upgrades to be completed on site rather than returning the card

to Datapath. Whenever a rmware upgrade is performed, the SW2 on the DIP switch must be set ON.

The DIP Switch can be located on the back of the VisionSC-SDI4 (See Fig. 6 ). To perform the upgrade,

follow the step-by-step instructions provided by the upgrade application. The VisionSC-SDI4 is shipped

with the SW2 switch set at ON, therefore no action should be necessary.

In the unlikely event that something goes wrong during the upgrade process (e.g. System power outage) it

is possible to revert to the factory settings by powering down the system, temporarily setting SW2 to the

OFF position then powering up the system. Once the system has rebooted, set the SW2 back to the ON

position (while the system is still powered up) and restart the rmware upgrade process.

It should be noted that the latest driver installation program includes an automatic rmware update, if

required. Therefore, prior to installing the application and driver, ensure that SW2 is set to ON.

Fig. 6

The Vision software (driver and application) is installed by inserting the CD that was shipped with your

card into your CD ROM drive. The installation process should start automatically.

Should the CD fail to autorun use Explorer to browse the CD, locate then double click on install.exe

le e.g. d:/install.exe and click on Install Software… and follow the installation wizard instructions as

prompted.

Regular software updates are available from our website: www.datapath.co.uk

Also available on the Datapath CD:

• The Release Notes - The release notes contain the latest information on the VisionSC-SDI4

• Installation instructions.

• Release history

• Known problems

• Troubleshooting

• The application Help File - Instructions on how to use the application. The help le is in d:/software/

vision.chm. The help le must be located on the local machine to view its content.

Using the card with other Datapath products

The VisionSC-SDI4 captures data and stores it in an on-board video buer. This data is then copied using

DMA to the host system for display, storage or streaming.

When a Datapath graphics card is used, VisionSC-SDI4 transfers the data directly to the graphics card

thereby increasing performance. The VisionSC-SDI4 sends the relevant portions of each captured image

to each display channel and instructs each channel to use its graphics engine to render the data. This fully

utilises the hardware and dramatically increases performance.

When a Direct3D compatible graphics card is used the data can be transferred direct to the graphics card

in a similar manner to the Datapath graphics card with the same benet of non-tearing captures.

When the data is displayed on a non Datapath graphics card, the VisionSC-SDI4 sends the data to system

memory or direct to the graphics card, dependant on the software used for display.

Software Installation

Datapath Limited

Datapath has a long and very successful history in the computer graphics industry. Datapath has been

designing and supplying high performance, high quality graphics display systems to the world’s larg-

est and most demanding companies and institutions since 1982. Datapath was one of the founding

companies of multi-screen Windows acceleration using single and multi board solutions. Now using

the very latest display technology Datapath oers some of the world’s leading multi screen graphics

accelerators for the most demanding applications.

As new technology advances, so we at Datapath improve the performance and functionality of both

our hardware and software to give our customers more. Following a continuous development pro-

gram, we pride ourselves on our support and responsive nature towards all our customers and their

changing needs. As more sophisticated equipment and techniques become readily available, so we

are there to exploit the power and potential that this technology presents.

Technical Support

Registered Users can access our technical support line using, email, and the Support page on the

Datapath Web Site, usually with a response within 24 hours (excluding weekends).

Via Email

Send an email to [email protected] with as much information about your system as possible.

To enable a swift response we need to know the following details:

• Specication of the PC - including processor speed

• Operating System

• Application Software

• Datapath Hardware / Software

• The exact nature of the problem - and please be as specic as possible.

Please quote version and revision numbers of hardware and software in use wherever possible.

Datapath Limited claims copyright on this documentation. No part of this documentation may be

reproduced, released, disclosed, stored in any electronic format, or used in whole or in part for any

purpose other than stated herein without the express permission of Datapath Limited.

Whilst every eort is made to ensure that the information contained in this User Guide is correct,

Datapath Limited make no representations or warranties with respect to the contents thereof, and

do not accept liability for any errors or omissions. Datapath reserves the right to change specication

without prior notice and cannot assume responsibility for the use made of the information supplied.

All registered trademarks used within this documentation are acknowledged by Datapath Limited.

Index

Application 6

Application Overview 6

Cable Lengths 9

Connecting BNC cables 9

Datapath CD 12

Datapath Limited 13

DIP switch 11

Direct3D 12

DirectShow 10

DirectShow interface 10

dplinks program 10

FCC 2

Firmware upgrade 11

Help File 12

How to Connect Input Sources 9

Maximum Capture Resolution 7

Models 4

Multiple cards 10

Multistream 6

Operating System Support 7

Packing box 8

Power Requirements 7

RGBEasy API 4

Software Capabilities 5

Software updates 12

Supported Frame Rates 7

SW2 11

Technical Support 13

Troubleshooting 12

Update Rate 7

Video Modes 7

Video Streaming 5

Vision Performance Driver 4

Datapath VisionSC-SDI4 Mode d'emploi

Marque: Datapath

Modèle: VisionSC-SDI4

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Datapath VisionSC-SDI4 User guide

Datapath VisionSC-SDI4 Mode d'emploi

Datapath VisionSC-SDI4 Mode d'emploi

dans d''autres langues

Documents connexes