LeapFrog Leapster GS Explorer Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

Get Started and Download Your Included Apps
1. Install the LeapFrog® Connect Application using the
included CD or visit www.leapfrog.com/connect to
download the installer.
2. Insert batteries and create player profi les (up to 3).
3. Connect the device to your computer and follow the
on-screen prompts.
4. Complete registration and go to the App Center to
download your apps.
Get your included apps when
you complete registration!
Instructions for Care
For Indoor, Dry-Location Use Only.
Keep food and beverages away from product. Do not spill liquid of any kind on this product as it may render it
inoperative. Clean with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never
submerge the unit in water. Allow to dry before reuse. Avoid prolonged exposure to extreme temperatures and direct
sunlight. Avoid dropping the unit. Never try to dismantle it.
A utiliser uniquement en intérieur, dans un endroit sec.
Tenir le produit à l’écart de la nourriture et des boissons. Ne jamais renverser un liquide sur ce produit car cela peut
l’endommager ou en faire cesser son fonctionnement. Nettoyer avec un chiffon légèrement humide (utiliser de
l’eau froide). N’utilisez pas de savon, de lessive, ou d’autres produits chimiques. Ne jamais immerger le produit dans
l’eau. Éviter une exposition prolongée aux températures extrêmes et aux rayons du soleil. Éviter de laisser tomber le
produit. Ne jamais essayer de le démonter.
Parent Controls
When the sign-in menu appears, press the left side of the D-pad and the Hint button at the same time, holding for at
least one second to access the Parent Settings menu. This menu lets you manage player profi les, setup options, reset
curriculum, trailer controls and screen calibration settings.
Touch Screen Calibration
Your LEAPSTER GS EXPLORER™ handheld touch screen has already been calibrated for use, but if you experience
either example below, you may adjust the calibration yourself:
Lines drawn with the stylus appear to be offset from the location of the stylus tip.
Objects you are trying to select are not being chosen.
Follow these steps to calibrate the touch screen:
1. Go to the Parent Settings menu and tap Screen Calibration to select—or hold down
the Hint button during device startup.
2. Touch each of the crosshairs with the stylus as they appear (5 in all).
3. If accessed via the Parent Settings menu, press the X button to exit the Parent
menu and return to the sign-in screen.
Cautions & Warnings
CAUTION:
This toy is not intended for children under 3 years old.
ATTENTION :
Ce jouet ne convient pas aux enfants de moins de 3 ans.
CAUTION:
Routinely check this toy for proper and safe condition. If there is any damage or broken parts,
remove toy from use.
ATTENTION :
Vérifi ez régulièrement que ce jouet est en bon état et qu’il ne présente pas de danger. Dans
le cas contraire (par exemple, s’il est cassé à certains endroits), tenez ce jouet hors de portée des enfants.
CAUTION:
If for any reason the screen (display) is fractured or cracked, immediately remove this product
from use and contact LeapFrog Consumer Services for replacement if under warranty.
ATTENTION :
Si pour quelque raison que ce soit, l’écran (d’affi chage) est brisé ou fendu, mettez
immédiatement ce produit hors de portée des enfants. Contactez ensuite le Service clientèle de LeapFrog pour qu’il
soit remplacé (si ce produit est sous garantie).
WARNING: Cords could be a strangulation hazard. Keep out of reach of children under 3 years of age. Children pulling on
the cord could cause the computer monitor, TV or other equipment to which the device is connected to fall with the possibility of
property damage, serious personal injury or death.
AVERTISSEMENT :
Les cordons peuvent représenter un risque d’étranglement. Tenez-les hors de portée
des enfants de moins de 3 ans. En tirant sur le cordon, un enfant peut causer la chute de l’écran de l’ordinateur, de
la télévision ou d’un autre appareil connecté à ce dispositif et provoquer des risques de dommages matériels, de
blessures graves, voire même la mort.
PROTECT YOUR HEARING
Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones
or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the
volume while in a quiet environment; turn the volume down if you cannot hear people speaking near you. Limit the
listening time to 90 minutes, followed by a quiet period. The louder the volume, the less time required before your
hearing may be affected. If you experience ringing in your ears or hear muffl ed speech, stop listening and have your
hearing checked.
PROTÉGEZ VOTRE OUÏE
Une exposition durable à des sonorités trop fortes peut entraîner une perte défi nitive de l’ouïe. Lorsque vous utilisez le
casque ou les écouteurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez le son lorsque
vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les personnes qui parlent autour de vous. Limitez
le temps d’écoute à 90 minutes, puis accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de
chances que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou si vous entendez des
voix sourdes, arrêtez immédiatement d’écouter ce produit et faites contrôler votre ouïe dans les plus brefs délais.
WARNING: It is rare but possible for seizures to be triggered by light fl ashes or patterns such as those on computer or
TV screens. To reduce exposure to this potential hazard, play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
AVERTISSEMENT :
Il peut arriver que certaines personnes soient sujettes à une attaque sous l’effet d’une
lumière vive ou d’un jeu de lumières provenant de l’écran d’un téléviseur ou d’un ordinateur. Pour réduire ce risque,
utilisez dans une pièce suffi samment éclairée et faites une pause toutes les heures, pendant 10 à 15 minutes.
Battery Safety
Batteries are small objects. Batteries must be replaced by an adult. Follow the polarity (+/-) diagram in the battery
compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for
prolonged storage. Only batteries of the same or equivalent type as recommended are to be used.
DO NOT incinerate used batteries.
DO NOT
dispose of batteries in fi re, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (e.g., alkaline/standard).
DO NOT short-circuit the supply terminals.
DO NOT recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult supervision.
• AA or LR6-size rechargeable batteries are to be removed from the toy before being charged.
• A Recharging System, including custom designed battery packs for charging the batteries while installed in the
product, is available from LeapFrog.
NOTICE: For Europe and Australia. In accordance with the EU Electric Toy Safety Standard, once installed, the
LeapFrog custom designed rechargeable battery packs cannot be removed from the product. As such, never try to
remove the battery packs as it will render the toy inoperable.
Sécurité relative aux piles
Les piles sont des objets de petite taille. Le remplacement des piles doit être effectué par un adulte. Respectez le
schéma de polarité (+/-) reproduit dans le compartiment des piles. Enlevez rapidement les piles usagées du jouet.
Suivez les procédures adéquates pour vous débarrasser des piles usagées. Retirez les piles en cas de non-usage
prolongé. Utilisez uniquement des piles ou accumulateurs du type recommandé ou d’un type équivalent.
NE PAS incinérer les piles usagées.
NE PAS jeter les piles au feu car elles peuvent exploser ou fuir.
NE PAS mélanger piles usagées et piles neuves, ni différents types de piles (c’est-à-dire alcalines/standard).
NE PAS recharger des piles non rechargeables.
• Les piles rechargeables ne doivent être rechargées que sous la présence directe d’un adulte.
• Les piles rechargeables de tailles AA ou LR06 doivent être retirées avant d’être chargées.
• Un système de recharge LeapFrog incluant des piles rechargeables qui peuvent être chargées en étant installées
dans le produit est disponible à LeapFrog.
NE PAS court-circuiter les terminaux d’alimentation.
NOTE : Pour l’Europe et l’Australie. En raison des standards pour la sécurité des jouets électriques, une fois installés,
les packs de piles rechargeables LeapFrog ne peuvent être retirés du produit. Donc, ne retirez jamais les packs de
piles car cela rendra votre jouet inopérationnel.
Battery Information
Requires 4 AA (called LR6 in some countries) alkaline batteries, not included.
Battery Removal and Installation Instructions
1. Open the battery door by pushing it outward using the thumbs of both hands.
2. If used or spent batteries are present, remove these batteries from the unit by pulling up on one end of
each battery.
3. Install new batteries as shown in the polarity (+/-) diagram inside the battery compartment.
4. Replace battery door securely.
5. For Europe and Australia Only—Please note: Once installed, LeapFrog custom design rechargeable battery packs
are not removable. See NOTICE above.
Power Adapter Safety
(Adapter sold separately; available from LeapFrog Enterprises, Inc.)
This toy is not intended for children under 3 years old.
WARNING:
Adapter cord could be a strangulation hazard.
CAUTION - ELECTRIC TOY
Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed
during the handling and use to prevent electrical shock. FOR INDOOR, DRY-LOCATION USE ONLY.
The transformer is not a toy and should be connected to the wall outlet by an adult. It should be periodically
examined for conditions that may result in the risk of fi re, electrical shock or injury to persons, such as damage to
the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used
until the damage is repaired. The cord of this transformer cannot be replaced; if the cord is damaged, dispose of the
transformer in accordance with your local electrical product recycling regulations.
Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by
children shall be under the full supervision of an adult.
The toy must be used with a transformer for toys.
The toy is not to be connected to more than the recommended number of power supplies.
Toys to be cleaned with a liquid are to be disconnected from the transformer before cleaning.
To clean transformer, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse
in water or use soap or other chemicals. Allow to dry before reusing. Do not connect to the AC outlet if wet or
damaged.
AC Adapter Electrical Ratings:
U.S, CAN Input:
120VAC, 60Hz
U.K. Input: 230V, 50Hz
Australia and New Zealand Input:
240V, 50Hz
Output:
DC9V, 700mA, 6.3VA
Consignes de sécurité pour l’utilisation de l’adaptateur
(Adaptateur vendu séparément; produit LeapFrog Enterprises, Inc.)
Ce jouet ne convient pas aux enfants de moins de 3 ans.
AVERTISSEMENT :
Le cordon de l’adaptateur peut provoquer un risque d’étranglement.
ATTENTION : CE JOUET FONCTIONNE À L’ÉLECTRICITÉ
Ne convient pas aux enfants de moins de 3 ans. Comme tous les objets utilisant du courant électrique, ce produit
doit être manipulé avec précaution pour éviter tout risque de décharge électrique. A UTILISER UNIQUEMENT EN
INTERIEUR, DANS UN ENDROIT SEC.
Le transformateur n’est pas un jouet et il est recommandé que ce soit un adulte qui le branche à la prise murale. Pour
éviter tout danger d’incendie, d’électrocution ou de blessure, veillez à contrôler périodiquement l’état du cordon
électrique, de la fi che d’alimentation électrique, des lames de contact, du boîtier ou de toute autre partie. Dans un tel
cas, le transformateur doit être réparé avant d’être réutilisé. La corde de ce transformateur ne peut pas être remplacé.
Si la corde s’abime, veuillez la jeter en suivant les règles de recyclage locales de produits électriques.
Le transformateur et les outils d’énergie pour les jouets ne doivent pas être utilisés comme des jouets, et l’utilisation
de ces produits par des enfants doit être faite seulement sous la présence d’un adulte.
Ce jouet doit être utilisé avec un transformateur pour jouet.
Le jouet ne doit pas être branché à plus d’accessoires que le nombre recommandé.
Débrancher le jouet de l’adaptateur avant de le nettoyer avec du liquide.
Pour nettoyer l’adaptateur, débranchez-le d’abord de la prise murale et utilisez ensuite un tissu humide pour
le nettoyer.
Voltage de l’adaptateur
Voltage d’entrée pour les Etats-Unis et le Canada :
120VAC, 60Hz
Voltage d’entrée pour le Royaume Uni :
230V, 50Hz
Voltage d’entrée pour l’Australie et la Nouvelle Zélande :
240V, 50Hz
Voltage de sortie :
DC9V, 700mA, 6.3VA
USB Cable
Use only the USB cable provided by LeapFrog Enterprises, Inc. Using any other cable may exceed FCC and other
regulatory emissions limits. The USB cable is not a toy. Disconnect the toy from the USB connection before cleaning.
Câble USB
Utilisez exclusivement le câble USB fourni par LeapFrog Enterprises, Inc. L’utilisation d’un autre câble peut dépasser
les limites de la FCC (Commission fédérale américaine des communications) et autres limites règlementaires en matière
d’émission. Le câble USB n’est pas un jouet. Déconnectez le jouet du port USB avant d’entamer toute opération de nettoyage.
FCC NOTICE:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifi cations to this unit not expressly approved by LeapFrog Enterprises, Inc., could void the
user’s authority to operate the equipment.
Canada: This Class B digital apparatus complies with Canadian ICES-003./ Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when
the interference stops. If not, it may become necessary to turn the power off and back on, or remove and reinstall
the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to
reset the device by removing and reinstalling the batteries.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference.
Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.
Get your included apps when
Visit leapfrog.com/support for additional tips and FAQs.
Microphone
AC adapter port
D-pad
On button
Home
USB port
Cartridge slot
Stylus
Hint
Pause
Volume control
Headphone
FOLD
FOLD
FOLD
Get Started and Download Your Included Apps
1. Install the LeapFrog® Connect Application using the
included CD or visit www.leapfrog.com/connect to
download the installer.
2. Insert batteries and create player profi les (up to 3).
3. Connect the device to your computer and follow the
on-screen prompts.
4. Complete registration and go to the App Center to
download your apps.
Get your included apps when
you complete registration!
Instructions for Care
For Indoor, Dry-Location Use Only.
Keep food and beverages away from product. Do not spill liquid of any kind on this product as it may render it
inoperative. Clean with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never
submerge the unit in water. Allow to dry before reuse. Avoid prolonged exposure to extreme temperatures and direct
sunlight. Avoid dropping the unit. Never try to dismantle it.
A utiliser uniquement en intérieur, dans un endroit sec.
Tenir le produit à l’écart de la nourriture et des boissons. Ne jamais renverser un liquide sur ce produit car cela peut
l’endommager ou en faire cesser son fonctionnement. Nettoyer avec un chiffon légèrement humide (utiliser de
l’eau froide). N’utilisez pas de savon, de lessive, ou d’autres produits chimiques. Ne jamais immerger le produit dans
l’eau. Éviter une exposition prolongée aux températures extrêmes et aux rayons du soleil. Éviter de laisser tomber le
produit. Ne jamais essayer de le démonter.
Parent Controls
When the sign-in menu appears, press the left side of the D-pad and the Hint button at the same time, holding for at
least one second to access the Parent Settings menu. This menu lets you manage player profi les, setup options, reset
curriculum, trailer controls and screen calibration settings.
Touch Screen Calibration
Your LEAPSTER GS EXPLORER™ handheld touch screen has already been calibrated for use, but if you experience
either example below, you may adjust the calibration yourself:
Lines drawn with the stylus appear to be offset from the location of the stylus tip.
Objects you are trying to select are not being chosen.
Follow these steps to calibrate the touch screen:
1. Go to the Parent Settings menu and tap Screen Calibration to select—or hold down
the Hint button during device startup.
2. Touch each of the crosshairs with the stylus as they appear (5 in all).
3. If accessed via the Parent Settings menu, press the X button to exit the Parent
menu and return to the sign-in screen.
Cautions & Warnings
CAUTION:
This toy is not intended for children under 3 years old.
ATTENTION :
Ce jouet ne convient pas aux enfants de moins de 3 ans.
CAUTION:
Routinely check this toy for proper and safe condition. If there is any damage or broken parts,
remove toy from use.
ATTENTION :
Vérifi ez régulièrement que ce jouet est en bon état et qu’il ne présente pas de danger. Dans
le cas contraire (par exemple, s’il est cassé à certains endroits), tenez ce jouet hors de portée des enfants.
CAUTION:
If for any reason the screen (display) is fractured or cracked, immediately remove this product
from use and contact LeapFrog Consumer Services for replacement if under warranty.
ATTENTION :
Si pour quelque raison que ce soit, l’écran (d’affi chage) est brisé ou fendu, mettez
immédiatement ce produit hors de portée des enfants. Contactez ensuite le Service clientèle de LeapFrog pour qu’il
soit remplacé (si ce produit est sous garantie).
WARNING: Cords could be a strangulation hazard. Keep out of reach of children under 3 years of age. Children pulling on
the cord could cause the computer monitor, TV or other equipment to which the device is connected to fall with the possibility of
property damage, serious personal injury or death.
AVERTISSEMENT :
Les cordons peuvent représenter un risque d’étranglement. Tenez-les hors de portée
des enfants de moins de 3 ans. En tirant sur le cordon, un enfant peut causer la chute de l’écran de l’ordinateur, de
la télévision ou d’un autre appareil connecté à ce dispositif et provoquer des risques de dommages matériels, de
blessures graves, voire même la mort.
PROTECT YOUR HEARING
Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones
or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the
volume while in a quiet environment; turn the volume down if you cannot hear people speaking near you. Limit the
listening time to 90 minutes, followed by a quiet period. The louder the volume, the less time required before your
hearing may be affected. If you experience ringing in your ears or hear muffl ed speech, stop listening and have your
hearing checked.
PROTÉGEZ VOTRE OUÏE
Une exposition durable à des sonorités trop fortes peut entraîner une perte défi nitive de l’ouïe. Lorsque vous utilisez le
casque ou les écouteurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez le son lorsque
vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les personnes qui parlent autour de vous. Limitez
le temps d’écoute à 90 minutes, puis accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de
chances que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou si vous entendez des
voix sourdes, arrêtez immédiatement d’écouter ce produit et faites contrôler votre ouïe dans les plus brefs délais.
WARNING: It is rare but possible for seizures to be triggered by light fl ashes or patterns such as those on computer or
TV screens. To reduce exposure to this potential hazard, play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
AVERTISSEMENT :
Il peut arriver que certaines personnes soient sujettes à une attaque sous l’effet d’une
lumière vive ou d’un jeu de lumières provenant de l’écran d’un téléviseur ou d’un ordinateur. Pour réduire ce risque,
utilisez dans une pièce suffi samment éclairée et faites une pause toutes les heures, pendant 10 à 15 minutes.
Battery Safety
Batteries are small objects. Batteries must be replaced by an adult. Follow the polarity (+/-) diagram in the battery
compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for
prolonged storage. Only batteries of the same or equivalent type as recommended are to be used.
DO NOT incinerate used batteries.
DO NOT
dispose of batteries in fi re, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (e.g., alkaline/standard).
DO NOT short-circuit the supply terminals.
DO NOT recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult supervision.
• AA or LR6-size rechargeable batteries are to be removed from the toy before being charged.
• A Recharging System, including custom designed battery packs for charging the batteries while installed in the
product, is available from LeapFrog.
NOTICE: For Europe and Australia. In accordance with the EU Electric Toy Safety Standard, once installed, the
LeapFrog custom designed rechargeable battery packs cannot be removed from the product. As such, never try to
remove the battery packs as it will render the toy inoperable.
Sécurité relative aux piles
Les piles sont des objets de petite taille. Le remplacement des piles doit être effectué par un adulte. Respectez le
schéma de polarité (+/-) reproduit dans le compartiment des piles. Enlevez rapidement les piles usagées du jouet.
Suivez les procédures adéquates pour vous débarrasser des piles usagées. Retirez les piles en cas de non-usage
prolongé. Utilisez uniquement des piles ou accumulateurs du type recommandé ou d’un type équivalent.
NE PAS incinérer les piles usagées.
NE PAS jeter les piles au feu car elles peuvent exploser ou fuir.
NE PAS mélanger piles usagées et piles neuves, ni différents types de piles (c’est-à-dire alcalines/standard).
NE PAS recharger des piles non rechargeables.
• Les piles rechargeables ne doivent être rechargées que sous la présence directe d’un adulte.
• Les piles rechargeables de tailles AA ou LR06 doivent être retirées avant d’être chargées.
• Un système de recharge LeapFrog incluant des piles rechargeables qui peuvent être chargées en étant installées
dans le produit est disponible à LeapFrog.
NE PAS court-circuiter les terminaux d’alimentation.
NOTE : Pour l’Europe et l’Australie. En raison des standards pour la sécurité des jouets électriques, une fois installés,
les packs de piles rechargeables LeapFrog ne peuvent être retirés du produit. Donc, ne retirez jamais les packs de
piles car cela rendra votre jouet inopérationnel.
Battery Information
Requires 4 AA (called LR6 in some countries) alkaline batteries, not included.
Battery Removal and Installation Instructions
1. Open the battery door by pushing it outward using the thumbs of both hands.
2. If used or spent batteries are present, remove these batteries from the unit by pulling up on one end of
each battery.
3. Install new batteries as shown in the polarity (+/-) diagram inside the battery compartment.
4. Replace battery door securely.
5. For Europe and Australia Only—Please note: Once installed, LeapFrog custom design rechargeable battery packs
are not removable. See NOTICE above.
Power Adapter Safety
(Adapter sold separately; available from LeapFrog Enterprises, Inc.)
This toy is not intended for children under 3 years old.
WARNING:
Adapter cord could be a strangulation hazard.
CAUTION - ELECTRIC TOY
Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed
during the handling and use to prevent electrical shock. FOR INDOOR, DRY-LOCATION USE ONLY.
The transformer is not a toy and should be connected to the wall outlet by an adult. It should be periodically
examined for conditions that may result in the risk of fi re, electrical shock or injury to persons, such as damage to
the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used
until the damage is repaired. The cord of this transformer cannot be replaced; if the cord is damaged, dispose of the
transformer in accordance with your local electrical product recycling regulations.
Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by
children shall be under the full supervision of an adult.
The toy must be used with a transformer for toys.
The toy is not to be connected to more than the recommended number of power supplies.
Toys to be cleaned with a liquid are to be disconnected from the transformer before cleaning.
To clean transformer, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse
in water or use soap or other chemicals. Allow to dry before reusing. Do not connect to the AC outlet if wet or
damaged.
AC Adapter Electrical Ratings:
U.S, CAN Input:
120VAC, 60Hz
U.K. Input: 230V, 50Hz
Australia and New Zealand Input:
240V, 50Hz
Output:
DC9V, 700mA, 6.3VA
Consignes de sécurité pour l’utilisation de l’adaptateur
(Adaptateur vendu séparément; produit LeapFrog Enterprises, Inc.)
Ce jouet ne convient pas aux enfants de moins de 3 ans.
AVERTISSEMENT :
Le cordon de l’adaptateur peut provoquer un risque d’étranglement.
ATTENTION : CE JOUET FONCTIONNE À L’ÉLECTRICITÉ
Ne convient pas aux enfants de moins de 3 ans. Comme tous les objets utilisant du courant électrique, ce produit
doit être manipulé avec précaution pour éviter tout risque de décharge électrique. A UTILISER UNIQUEMENT EN
INTERIEUR, DANS UN ENDROIT SEC.
Le transformateur n’est pas un jouet et il est recommandé que ce soit un adulte qui le branche à la prise murale. Pour
éviter tout danger d’incendie, d’électrocution ou de blessure, veillez à contrôler périodiquement l’état du cordon
électrique, de la fi che d’alimentation électrique, des lames de contact, du boîtier ou de toute autre partie. Dans un tel
cas, le transformateur doit être réparé avant d’être réutilisé. La corde de ce transformateur ne peut pas être remplacé.
Si la corde s’abime, veuillez la jeter en suivant les règles de recyclage locales de produits électriques.
Le transformateur et les outils d’énergie pour les jouets ne doivent pas être utilisés comme des jouets, et l’utilisation
de ces produits par des enfants doit être faite seulement sous la présence d’un adulte.
Ce jouet doit être utilisé avec un transformateur pour jouet.
Le jouet ne doit pas être branché à plus d’accessoires que le nombre recommandé.
Débrancher le jouet de l’adaptateur avant de le nettoyer avec du liquide.
Pour nettoyer l’adaptateur, débranchez-le d’abord de la prise murale et utilisez ensuite un tissu humide pour
le nettoyer.
Voltage de l’adaptateur
Voltage d’entrée pour les Etats-Unis et le Canada :
120VAC, 60Hz
Voltage d’entrée pour le Royaume Uni :
230V, 50Hz
Voltage d’entrée pour l’Australie et la Nouvelle Zélande :
240V, 50Hz
Voltage de sortie :
DC9V, 700mA, 6.3VA
USB Cable
Use only the USB cable provided by LeapFrog Enterprises, Inc. Using any other cable may exceed FCC and other
regulatory emissions limits. The USB cable is not a toy. Disconnect the toy from the USB connection before cleaning.
Câble USB
Utilisez exclusivement le câble USB fourni par LeapFrog Enterprises, Inc. L’utilisation d’un autre câble peut dépasser
les limites de la FCC (Commission fédérale américaine des communications) et autres limites règlementaires en matière
d’émission. Le câble USB n’est pas un jouet. Déconnectez le jouet du port USB avant d’entamer toute opération de nettoyage.
FCC NOTICE:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifi cations to this unit not expressly approved by LeapFrog Enterprises, Inc., could void the
user’s authority to operate the equipment.
Canada: This Class B digital apparatus complies with Canadian ICES-003./ Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when
the interference stops. If not, it may become necessary to turn the power off and back on, or remove and reinstall
the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to
reset the device by removing and reinstalling the batteries.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference.
Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.
Get your included apps when
Visit leapfrog.com/support for additional tips and FAQs.
Microphone
AC adapter port
D-pad
On button
Home
USB port
Cartridge slot
Stylus
Hint
Pause
Volume control
Headphone
FOLD
FOLD
FOLD
Get Started and Download Your Included Apps
1. Install the LeapFrog® Connect Application using the
included CD or visit www.leapfrog.com/connect to
download the installer.
2. Insert batteries and create player profi les (up to 3).
3. Connect the device to your computer and follow the
on-screen prompts.
4. Complete registration and go to the App Center to
download your apps.
Get your included apps when
you complete registration!
Instructions for Care
For Indoor, Dry-Location Use Only.
Keep food and beverages away from product. Do not spill liquid of any kind on this product as it may render it
inoperative. Clean with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never
submerge the unit in water. Allow to dry before reuse. Avoid prolonged exposure to extreme temperatures and direct
sunlight. Avoid dropping the unit. Never try to dismantle it.
A utiliser uniquement en intérieur, dans un endroit sec.
Tenir le produit à l’écart de la nourriture et des boissons. Ne jamais renverser un liquide sur ce produit car cela peut
l’endommager ou en faire cesser son fonctionnement. Nettoyer avec un chiffon légèrement humide (utiliser de
l’eau froide). N’utilisez pas de savon, de lessive, ou d’autres produits chimiques. Ne jamais immerger le produit dans
l’eau. Éviter une exposition prolongée aux températures extrêmes et aux rayons du soleil. Éviter de laisser tomber le
produit. Ne jamais essayer de le démonter.
Parent Controls
When the sign-in menu appears, press the left side of the D-pad and the Hint button at the same time, holding for at
least one second to access the Parent Settings menu. This menu lets you manage player profi les, setup options, reset
curriculum, trailer controls and screen calibration settings.
Touch Screen Calibration
Your LEAPSTER GS EXPLORER™ handheld touch screen has already been calibrated for use, but if you experience
either example below, you may adjust the calibration yourself:
Lines drawn with the stylus appear to be offset from the location of the stylus tip.
Objects you are trying to select are not being chosen.
Follow these steps to calibrate the touch screen:
1. Go to the Parent Settings menu and tap Screen Calibration to select—or hold down
the Hint button during device startup.
2. Touch each of the crosshairs with the stylus as they appear (5 in all).
3. If accessed via the Parent Settings menu, press the X button to exit the Parent
menu and return to the sign-in screen.
Cautions & Warnings
CAUTION:
This toy is not intended for children under 3 years old.
ATTENTION :
Ce jouet ne convient pas aux enfants de moins de 3 ans.
CAUTION:
Routinely check this toy for proper and safe condition. If there is any damage or broken parts,
remove toy from use.
ATTENTION :
Vérifi ez régulièrement que ce jouet est en bon état et qu’il ne présente pas de danger. Dans
le cas contraire (par exemple, s’il est cassé à certains endroits), tenez ce jouet hors de portée des enfants.
CAUTION:
If for any reason the screen (display) is fractured or cracked, immediately remove this product
from use and contact LeapFrog Consumer Services for replacement if under warranty.
ATTENTION :
Si pour quelque raison que ce soit, l’écran (d’affi chage) est brisé ou fendu, mettez
immédiatement ce produit hors de portée des enfants. Contactez ensuite le Service clientèle de LeapFrog pour qu’il
soit remplacé (si ce produit est sous garantie).
WARNING: Cords could be a strangulation hazard. Keep out of reach of children under 3 years of age. Children pulling on
the cord could cause the computer monitor, TV or other equipment to which the device is connected to fall with the possibility of
property damage, serious personal injury or death.
AVERTISSEMENT :
Les cordons peuvent représenter un risque d’étranglement. Tenez-les hors de portée
des enfants de moins de 3 ans. En tirant sur le cordon, un enfant peut causer la chute de l’écran de l’ordinateur, de
la télévision ou d’un autre appareil connecté à ce dispositif et provoquer des risques de dommages matériels, de
blessures graves, voire même la mort.
PROTECT YOUR HEARING
Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones
or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the
volume while in a quiet environment; turn the volume down if you cannot hear people speaking near you. Limit the
listening time to 90 minutes, followed by a quiet period. The louder the volume, the less time required before your
hearing may be affected. If you experience ringing in your ears or hear muffl ed speech, stop listening and have your
hearing checked.
PROTÉGEZ VOTRE OUÏE
Une exposition durable à des sonorités trop fortes peut entraîner une perte défi nitive de l’ouïe. Lorsque vous utilisez le
casque ou les écouteurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez le son lorsque
vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les personnes qui parlent autour de vous. Limitez
le temps d’écoute à 90 minutes, puis accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de
chances que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou si vous entendez des
voix sourdes, arrêtez immédiatement d’écouter ce produit et faites contrôler votre ouïe dans les plus brefs délais.
WARNING: It is rare but possible for seizures to be triggered by light fl ashes or patterns such as those on computer or
TV screens. To reduce exposure to this potential hazard, play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
AVERTISSEMENT :
Il peut arriver que certaines personnes soient sujettes à une attaque sous l’effet d’une
lumière vive ou d’un jeu de lumières provenant de l’écran d’un téléviseur ou d’un ordinateur. Pour réduire ce risque,
utilisez dans une pièce suffi samment éclairée et faites une pause toutes les heures, pendant 10 à 15 minutes.
Battery Safety
Batteries are small objects. Batteries must be replaced by an adult. Follow the polarity (+/-) diagram in the battery
compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for
prolonged storage. Only batteries of the same or equivalent type as recommended are to be used.
DO NOT incinerate used batteries.
DO NOT dispose of batteries in fi re, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (e.g., alkaline/standard).
DO NOT short-circuit the supply terminals.
DO NOT recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult supervision.
• AA or LR6-size rechargeable batteries are to be removed from the toy before being charged.
• A Recharging System, including custom designed battery packs for charging the batteries while installed in the
product, is available from LeapFrog.
NOTICE: For Europe and Australia. In accordance with the EU Electric Toy Safety Standard, once installed, the
LeapFrog custom designed rechargeable battery packs cannot be removed from the product. As such, never try to
remove the battery packs as it will render the toy inoperable.
Sécurité relative aux piles
Les piles sont des objets de petite taille. Le remplacement des piles doit être effectué par un adulte. Respectez le
schéma de polarité (+/-) reproduit dans le compartiment des piles. Enlevez rapidement les piles usagées du jouet.
Suivez les procédures adéquates pour vous débarrasser des piles usagées. Retirez les piles en cas de non-usage
prolongé. Utilisez uniquement des piles ou accumulateurs du type recommandé ou d’un type équivalent.
NE PAS incinérer les piles usagées.
NE PAS jeter les piles au feu car elles peuvent exploser ou fuir.
NE PAS mélanger piles usagées et piles neuves, ni différents types de piles (c’est-à-dire alcalines/standard).
NE PAS recharger des piles non rechargeables.
• Les piles rechargeables ne doivent être rechargées que sous la présence directe d’un adulte.
• Les piles rechargeables de tailles AA ou LR06 doivent être retirées avant d’être chargées.
• Un système de recharge LeapFrog incluant des piles rechargeables qui peuvent être chargées en étant installées
dans le produit est disponible à LeapFrog.
NE PAS court-circuiter les terminaux d’alimentation.
NOTE : Pour l’Europe et l’Australie. En raison des standards pour la sécurité des jouets électriques, une fois installés,
les packs de piles rechargeables LeapFrog ne peuvent être retirés du produit. Donc, ne retirez jamais les packs de
piles car cela rendra votre jouet inopérationnel.
Battery Information
Requires 4 AA (called LR6 in some countries) alkaline batteries, not included.
Battery Removal and Installation Instructions
1. Open the battery door by pushing it outward using the thumbs of both hands.
2. If used or spent batteries are present, remove these batteries from the unit by pulling up on one end of
each battery.
3. Install new batteries as shown in the polarity (+/-) diagram inside the battery compartment.
4. Replace battery door securely.
5. For Europe and Australia Only—Please note: Once installed, LeapFrog custom design rechargeable battery packs
are not removable. See NOTICE above.
Power Adapter Safety
(Adapter sold separately; available from LeapFrog Enterprises, Inc.)
This toy is not intended for children under 3 years old.
WARNING:
Adapter cord could be a strangulation hazard.
CAUTION - ELECTRIC TOY
Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed
during the handling and use to prevent electrical shock. FOR INDOOR, DRY-LOCATION USE ONLY.
The transformer is not a toy and should be connected to the wall outlet by an adult. It should be periodically
examined for conditions that may result in the risk of fi re, electrical shock or injury to persons, such as damage to
the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used
until the damage is repaired. The cord of this transformer cannot be replaced; if the cord is damaged, dispose of the
transformer in accordance with your local electrical product recycling regulations.
Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by
children shall be under the full supervision of an adult.
The toy must be used with a transformer for toys.
The toy is not to be connected to more than the recommended number of power supplies.
Toys to be cleaned with a liquid are to be disconnected from the transformer before cleaning.
To clean transformer, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse
in water or use soap or other chemicals. Allow to dry before reusing. Do not connect to the AC outlet if wet or
damaged.
AC Adapter Electrical Ratings:
U.S, CAN Input:
120VAC, 60Hz
U.K. Input: 230V, 50Hz
Australia and New Zealand Input:
240V, 50Hz
Output:
DC9V, 700mA, 6.3VA
Consignes de sécurité pour l’utilisation de l’adaptateur
(Adaptateur vendu séparément; produit LeapFrog Enterprises, Inc.)
Ce jouet ne convient pas aux enfants de moins de 3 ans.
AVERTISSEMENT :
Le cordon de l’adaptateur peut provoquer un risque d’étranglement.
ATTENTION : CE JOUET FONCTIONNE À L’ÉLECTRICITÉ
Ne convient pas aux enfants de moins de 3 ans. Comme tous les objets utilisant du courant électrique, ce produit
doit être manipulé avec précaution pour éviter tout risque de décharge électrique. A UTILISER UNIQUEMENT EN
INTERIEUR, DANS UN ENDROIT SEC.
Le transformateur n’est pas un jouet et il est recommandé que ce soit un adulte qui le branche à la prise murale. Pour
éviter tout danger d’incendie, d’électrocution ou de blessure, veillez à contrôler périodiquement l’état du cordon
électrique, de la fi che d’alimentation électrique, des lames de contact, du boîtier ou de toute autre partie. Dans un tel
cas, le transformateur doit être réparé avant d’être réutilisé. La corde de ce transformateur ne peut pas être remplacé.
Si la corde s’abime, veuillez la jeter en suivant les règles de recyclage locales de produits électriques.
Le transformateur et les outils d’énergie pour les jouets ne doivent pas être utilisés comme des jouets, et l’utilisation
de ces produits par des enfants doit être faite seulement sous la présence d’un adulte.
Ce jouet doit être utilisé avec un transformateur pour jouet.
Le jouet ne doit pas être branché à plus d’accessoires que le nombre recommandé.
Débrancher le jouet de l’adaptateur avant de le nettoyer avec du liquide.
Pour nettoyer l’adaptateur, débranchez-le d’abord de la prise murale et utilisez ensuite un tissu humide pour
le nettoyer.
Voltage de l’adaptateur
Voltage d’entrée pour les Etats-Unis et le Canada :
120VAC, 60Hz
Voltage d’entrée pour le Royaume Uni :
230V, 50Hz
Voltage d’entrée pour l’Australie et la Nouvelle Zélande :
240V, 50Hz
Voltage de sortie :
DC9V, 700mA, 6.3VA
USB Cable
Use only the USB cable provided by LeapFrog Enterprises, Inc. Using any other cable may exceed FCC and other
regulatory emissions limits. The USB cable is not a toy. Disconnect the toy from the USB connection before cleaning.
Câble USB
Utilisez exclusivement le câble USB fourni par LeapFrog Enterprises, Inc. L’utilisation d’un autre câble peut dépasser
les limites de la FCC (Commission fédérale américaine des communications) et autres limites règlementaires en matière
d’émission. Le câble USB n’est pas un jouet. Déconnectez le jouet du port USB avant d’entamer toute opération de nettoyage.
FCC NOTICE:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifi cations to this unit not expressly approved by LeapFrog Enterprises, Inc., could void the
user’s authority to operate the equipment.
Canada: This Class B digital apparatus complies with Canadian ICES-003./ Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when
the interference stops. If not, it may become necessary to turn the power off and back on, or remove and reinstall
the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to
reset the device by removing and reinstalling the batteries.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference.
Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.
Get your included apps when
Visit leapfrog.com/support for additional tips and FAQs.
Microphone
AC adapter port
D-pad
On button
Home
USB port
Cartridge slot
Stylus
Hint
Pause
Volume control
Headphone
FOLD
FOLD
FOLD
Get Started and Download Your Included Apps
1. Install the LeapFrog® Connect Application using the
included CD or visit www.leapfrog.com/connect to
download the installer.
2. Insert batteries and create player profi les (up to 3).
3. Connect the device to your computer and follow the
on-screen prompts.
4. Complete registration and go to the App Center to
download your apps.
Get your included apps when
you complete registration!
Instructions for Care
For Indoor, Dry-Location Use Only.
Keep food and beverages away from product. Do not spill liquid of any kind on this product as it may render it
inoperative. Clean with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never
submerge the unit in water. Allow to dry before reuse. Avoid prolonged exposure to extreme temperatures and direct
sunlight. Avoid dropping the unit. Never try to dismantle it.
A utiliser uniquement en intérieur, dans un endroit sec.
Tenir le produit à l’écart de la nourriture et des boissons. Ne jamais renverser un liquide sur ce produit car cela peut
l’endommager ou en faire cesser son fonctionnement. Nettoyer avec un chiffon légèrement humide (utiliser de
l’eau froide). N’utilisez pas de savon, de lessive, ou d’autres produits chimiques. Ne jamais immerger le produit dans
l’eau. Éviter une exposition prolongée aux températures extrêmes et aux rayons du soleil. Éviter de laisser tomber le
produit. Ne jamais essayer de le démonter.
Parent Controls
When the sign-in menu appears, press the left side of the D-pad and the Hint button at the same time, holding for at
least one second to access the Parent Settings menu. This menu lets you manage player profi les, setup options, reset
curriculum, trailer controls and screen calibration settings.
Touch Screen Calibration
Your LEAPSTER GS EXPLORER™ handheld touch screen has already been calibrated for use, but if you experience
either example below, you may adjust the calibration yourself:
Lines drawn with the stylus appear to be offset from the location of the stylus tip.
Objects you are trying to select are not being chosen.
Follow these steps to calibrate the touch screen:
1. Go to the Parent Settings menu and tap Screen Calibration to select—or hold down
the Hint button during device startup.
2. Touch each of the crosshairs with the stylus as they appear (5 in all).
3. If accessed via the Parent Settings menu, press the X button to exit the Parent
menu and return to the sign-in screen.
Cautions & Warnings
CAUTION:
This toy is not intended for children under 3 years old.
ATTENTION :
Ce jouet ne convient pas aux enfants de moins de 3 ans.
CAUTION:
Routinely check this toy for proper and safe condition. If there is any damage or broken parts,
remove toy from use.
ATTENTION :
Vérifi ez régulièrement que ce jouet est en bon état et qu’il ne présente pas de danger. Dans
le cas contraire (par exemple, s’il est cassé à certains endroits), tenez ce jouet hors de portée des enfants.
CAUTION:
If for any reason the screen (display) is fractured or cracked, immediately remove this product
from use and contact LeapFrog Consumer Services for replacement if under warranty.
ATTENTION :
Si pour quelque raison que ce soit, l’écran (d’affi chage) est brisé ou fendu, mettez
immédiatement ce produit hors de portée des enfants. Contactez ensuite le Service clientèle de LeapFrog pour qu’il
soit remplacé (si ce produit est sous garantie).
WARNING: Cords could be a strangulation hazard. Keep out of reach of children under 3 years of age. Children pulling on
the cord could cause the computer monitor, TV or other equipment to which the device is connected to fall with the possibility of
property damage, serious personal injury or death.
AVERTISSEMENT :
Les cordons peuvent représenter un risque d’étranglement. Tenez-les hors de portée
des enfants de moins de 3 ans. En tirant sur le cordon, un enfant peut causer la chute de l’écran de l’ordinateur, de
la télévision ou d’un autre appareil connecté à ce dispositif et provoquer des risques de dommages matériels, de
blessures graves, voire même la mort.
PROTECT YOUR HEARING
Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones
or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the
volume while in a quiet environment; turn the volume down if you cannot hear people speaking near you. Limit the
listening time to 90 minutes, followed by a quiet period. The louder the volume, the less time required before your
hearing may be affected. If you experience ringing in your ears or hear muffl ed speech, stop listening and have your
hearing checked.
PROTÉGEZ VOTRE OUÏE
Une exposition durable à des sonorités trop fortes peut entraîner une perte défi nitive de l’ouïe. Lorsque vous utilisez le
casque ou les écouteurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez le son lorsque
vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les personnes qui parlent autour de vous. Limitez
le temps d’écoute à 90 minutes, puis accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de
chances que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou si vous entendez des
voix sourdes, arrêtez immédiatement d’écouter ce produit et faites contrôler votre ouïe dans les plus brefs délais.
WARNING: It is rare but possible for seizures to be triggered by light fl ashes or patterns such as those on computer or
TV screens. To reduce exposure to this potential hazard, play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
AVERTISSEMENT :
Il peut arriver que certaines personnes soient sujettes à une attaque sous l’effet d’une
lumière vive ou d’un jeu de lumières provenant de l’écran d’un téléviseur ou d’un ordinateur. Pour réduire ce risque,
utilisez dans une pièce suffi samment éclairée et faites une pause toutes les heures, pendant 10 à 15 minutes.
Battery Safety
Batteries are small objects. Batteries must be replaced by an adult. Follow the polarity (+/-) diagram in the battery
compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for
prolonged storage. Only batteries of the same or equivalent type as recommended are to be used.
DO NOT incinerate used batteries.
DO NOT dispose of batteries in fi re, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (e.g., alkaline/standard).
DO NOT short-circuit the supply terminals.
DO NOT recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult supervision.
• AA or LR6-size rechargeable batteries are to be removed from the toy before being charged.
• A Recharging System, including custom designed battery packs for charging the batteries while installed in the
product, is available from LeapFrog.
NOTICE: For Europe and Australia. In accordance with the EU Electric Toy Safety Standard, once installed, the
LeapFrog custom designed rechargeable battery packs cannot be removed from the product. As such, never try to
remove the battery packs as it will render the toy inoperable.
Sécurité relative aux piles
Les piles sont des objets de petite taille. Le remplacement des piles doit être effectué par un adulte. Respectez le
schéma de polarité (+/-) reproduit dans le compartiment des piles. Enlevez rapidement les piles usagées du jouet.
Suivez les procédures adéquates pour vous débarrasser des piles usagées. Retirez les piles en cas de non-usage
prolongé. Utilisez uniquement des piles ou accumulateurs du type recommandé ou d’un type équivalent.
NE PAS incinérer les piles usagées.
NE PAS jeter les piles au feu car elles peuvent exploser ou fuir.
NE PAS mélanger piles usagées et piles neuves, ni différents types de piles (c’est-à-dire alcalines/standard).
NE PAS recharger des piles non rechargeables.
• Les piles rechargeables ne doivent être rechargées que sous la présence directe d’un adulte.
• Les piles rechargeables de tailles AA ou LR06 doivent être retirées avant d’être chargées.
• Un système de recharge LeapFrog incluant des piles rechargeables qui peuvent être chargées en étant installées
dans le produit est disponible à LeapFrog.
NE PAS court-circuiter les terminaux d’alimentation.
NOTE : Pour l’Europe et l’Australie. En raison des standards pour la sécurité des jouets électriques, une fois installés,
les packs de piles rechargeables LeapFrog ne peuvent être retirés du produit. Donc, ne retirez jamais les packs de
piles car cela rendra votre jouet inopérationnel.
Battery Information
Requires 4 AA (called LR6 in some countries) alkaline batteries, not included.
Battery Removal and Installation Instructions
1. Open the battery door by pushing it outward using the thumbs of both hands.
2. If used or spent batteries are present, remove these batteries from the unit by pulling up on one end of
each battery.
3. Install new batteries as shown in the polarity (+/-) diagram inside the battery compartment.
4. Replace battery door securely.
5. For Europe and Australia Only—Please note: Once installed, LeapFrog custom design rechargeable battery packs
are not removable. See NOTICE above.
Power Adapter Safety
(Adapter sold separately; available from LeapFrog Enterprises, Inc.)
This toy is not intended for children under 3 years old.
WARNING:
Adapter cord could be a strangulation hazard.
CAUTION - ELECTRIC TOY
Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed
during the handling and use to prevent electrical shock. FOR INDOOR, DRY-LOCATION USE ONLY.
The transformer is not a toy and should be connected to the wall outlet by an adult. It should be periodically
examined for conditions that may result in the risk of fi re, electrical shock or injury to persons, such as damage to
the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used
until the damage is repaired. The cord of this transformer cannot be replaced; if the cord is damaged, dispose of the
transformer in accordance with your local electrical product recycling regulations.
Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by
children shall be under the full supervision of an adult.
The toy must be used with a transformer for toys.
The toy is not to be connected to more than the recommended number of power supplies.
Toys to be cleaned with a liquid are to be disconnected from the transformer before cleaning.
To clean transformer, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse
in water or use soap or other chemicals. Allow to dry before reusing. Do not connect to the AC outlet if wet or
damaged.
AC Adapter Electrical Ratings:
U.S, CAN Input:
120VAC, 60Hz
U.K. Input: 230V, 50Hz
Australia and New Zealand Input:
240V, 50Hz
Output:
DC9V, 700mA, 6.3VA
Consignes de sécurité pour l’utilisation de l’adaptateur
(Adaptateur vendu séparément; produit LeapFrog Enterprises, Inc.)
Ce jouet ne convient pas aux enfants de moins de 3 ans.
AVERTISSEMENT :
Le cordon de l’adaptateur peut provoquer un risque d’étranglement.
ATTENTION : CE JOUET FONCTIONNE À L’ÉLECTRICITÉ
Ne convient pas aux enfants de moins de 3 ans. Comme tous les objets utilisant du courant électrique, ce produit
doit être manipulé avec précaution pour éviter tout risque de décharge électrique. A UTILISER UNIQUEMENT EN
INTERIEUR, DANS UN ENDROIT SEC.
Le transformateur n’est pas un jouet et il est recommandé que ce soit un adulte qui le branche à la prise murale. Pour
éviter tout danger d’incendie, d’électrocution ou de blessure, veillez à contrôler périodiquement l’état du cordon
électrique, de la fi che d’alimentation électrique, des lames de contact, du boîtier ou de toute autre partie. Dans un tel
cas, le transformateur doit être réparé avant d’être réutilisé. La corde de ce transformateur ne peut pas être remplacé.
Si la corde s’abime, veuillez la jeter en suivant les règles de recyclage locales de produits électriques.
Le transformateur et les outils d’énergie pour les jouets ne doivent pas être utilisés comme des jouets, et l’utilisation
de ces produits par des enfants doit être faite seulement sous la présence d’un adulte.
Ce jouet doit être utilisé avec un transformateur pour jouet.
Le jouet ne doit pas être branché à plus d’accessoires que le nombre recommandé.
Débrancher le jouet de l’adaptateur avant de le nettoyer avec du liquide.
Pour nettoyer l’adaptateur, débranchez-le d’abord de la prise murale et utilisez ensuite un tissu humide pour
le nettoyer.
Voltage de l’adaptateur
Voltage d’entrée pour les Etats-Unis et le Canada :
120VAC, 60Hz
Voltage d’entrée pour le Royaume Uni :
230V, 50Hz
Voltage d’entrée pour l’Australie et la Nouvelle Zélande :
240V, 50Hz
Voltage de sortie :
DC9V, 700mA, 6.3VA
USB Cable
Use only the USB cable provided by LeapFrog Enterprises, Inc. Using any other cable may exceed FCC and other
regulatory emissions limits. The USB cable is not a toy. Disconnect the toy from the USB connection before cleaning.
Câble USB
Utilisez exclusivement le câble USB fourni par LeapFrog Enterprises, Inc. L’utilisation d’un autre câble peut dépasser
les limites de la FCC (Commission fédérale américaine des communications) et autres limites règlementaires en matière
d’émission. Le câble USB n’est pas un jouet. Déconnectez le jouet du port USB avant d’entamer toute opération de nettoyage.
FCC NOTICE:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifi cations to this unit not expressly approved by LeapFrog Enterprises, Inc., could void the
user’s authority to operate the equipment.
Canada: This Class B digital apparatus complies with Canadian ICES-003./ Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when
the interference stops. If not, it may become necessary to turn the power off and back on, or remove and reinstall
the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to
reset the device by removing and reinstalling the batteries.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference.
Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.
Get your included apps when
Visit leapfrog.com/support for additional tips and FAQs.
Microphone
AC adapter port
D-pad
On button
Home
USB port
Cartridge slot
Stylus
Hint
Pause
Volume control
Headphone
FOLD
FOLD
FOLD
Get Started and Download Your Included Apps
1. Install the LeapFrog® Connect Application using the
included CD or visit www.leapfrog.com/connect to
download the installer.
2. Insert batteries and create player profi les (up to 3).
3. Connect the device to your computer and follow the
on-screen prompts.
4. Complete registration and go to the App Center to
download your apps.
Get your included apps when
you complete registration!
Instructions for Care
For Indoor, Dry-Location Use Only.
Keep food and beverages away from product. Do not spill liquid of any kind on this product as it may render it
inoperative. Clean with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never
submerge the unit in water. Allow to dry before reuse. Avoid prolonged exposure to extreme temperatures and direct
sunlight. Avoid dropping the unit. Never try to dismantle it.
A utiliser uniquement en intérieur, dans un endroit sec.
Tenir le produit à l’écart de la nourriture et des boissons. Ne jamais renverser un liquide sur ce produit car cela peut
l’endommager ou en faire cesser son fonctionnement. Nettoyer avec un chiffon légèrement humide (utiliser de
l’eau froide). N’utilisez pas de savon, de lessive, ou d’autres produits chimiques. Ne jamais immerger le produit dans
l’eau. Éviter une exposition prolongée aux températures extrêmes et aux rayons du soleil. Éviter de laisser tomber le
produit. Ne jamais essayer de le démonter.
Parent Controls
When the sign-in menu appears, press the left side of the D-pad and the Hint button at the same time, holding for at
least one second to access the Parent Settings menu. This menu lets you manage player profi les, setup options, reset
curriculum, trailer controls and screen calibration settings.
Touch Screen Calibration
Your LEAPSTER GS EXPLORER™ handheld touch screen has already been calibrated for use, but if you experience
either example below, you may adjust the calibration yourself:
Lines drawn with the stylus appear to be offset from the location of the stylus tip.
Objects you are trying to select are not being chosen.
Follow these steps to calibrate the touch screen:
1. Go to the Parent Settings menu and tap Screen Calibration to select—or hold down
the Hint button during device startup.
2. Touch each of the crosshairs with the stylus as they appear (5 in all).
3. If accessed via the Parent Settings menu, press the X button to exit the Parent
menu and return to the sign-in screen.
Cautions & Warnings
CAUTION:
This toy is not intended for children under 3 years old.
ATTENTION :
Ce jouet ne convient pas aux enfants de moins de 3 ans.
CAUTION:
Routinely check this toy for proper and safe condition. If there is any damage or broken parts,
remove toy from use.
ATTENTION :
Vérifi ez régulièrement que ce jouet est en bon état et qu’il ne présente pas de danger. Dans
le cas contraire (par exemple, s’il est cassé à certains endroits), tenez ce jouet hors de portée des enfants.
CAUTION:
If for any reason the screen (display) is fractured or cracked, immediately remove this product
from use and contact LeapFrog Consumer Services for replacement if under warranty.
ATTENTION :
Si pour quelque raison que ce soit, l’écran (d’affi chage) est brisé ou fendu, mettez
immédiatement ce produit hors de portée des enfants. Contactez ensuite le Service clientèle de LeapFrog pour qu’il
soit remplacé (si ce produit est sous garantie).
WARNING: Cords could be a strangulation hazard. Keep out of reach of children under 3 years of age. Children pulling on
the cord could cause the computer monitor, TV or other equipment to which the device is connected to fall with the possibility of
property damage, serious personal injury or death.
AVERTISSEMENT :
Les cordons peuvent représenter un risque d’étranglement. Tenez-les hors de portée
des enfants de moins de 3 ans. En tirant sur le cordon, un enfant peut causer la chute de l’écran de l’ordinateur, de
la télévision ou d’un autre appareil connecté à ce dispositif et provoquer des risques de dommages matériels, de
blessures graves, voire même la mort.
PROTECT YOUR HEARING
Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones
or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the
volume while in a quiet environment; turn the volume down if you cannot hear people speaking near you. Limit the
listening time to 90 minutes, followed by a quiet period. The louder the volume, the less time required before your
hearing may be affected. If you experience ringing in your ears or hear muffl ed speech, stop listening and have your
hearing checked.
PROTÉGEZ VOTRE OUÏE
Une exposition durable à des sonorités trop fortes peut entraîner une perte défi nitive de l’ouïe. Lorsque vous utilisez le
casque ou les écouteurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez le son lorsque
vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les personnes qui parlent autour de vous. Limitez
le temps d’écoute à 90 minutes, puis accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de
chances que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou si vous entendez des
voix sourdes, arrêtez immédiatement d’écouter ce produit et faites contrôler votre ouïe dans les plus brefs délais.
WARNING: It is rare but possible for seizures to be triggered by light fl ashes or patterns such as those on computer or
TV screens. To reduce exposure to this potential hazard, play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
AVERTISSEMENT :
Il peut arriver que certaines personnes soient sujettes à une attaque sous l’effet d’une
lumière vive ou d’un jeu de lumières provenant de l’écran d’un téléviseur ou d’un ordinateur. Pour réduire ce risque,
utilisez dans une pièce suffi samment éclairée et faites une pause toutes les heures, pendant 10 à 15 minutes.
Battery Safety
Batteries are small objects. Batteries must be replaced by an adult. Follow the polarity (+/-) diagram in the battery
compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for
prolonged storage. Only batteries of the same or equivalent type as recommended are to be used.
DO NOT incinerate used batteries.
DO NOT
dispose of batteries in fi re, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (e.g., alkaline/standard).
DO NOT short-circuit the supply terminals.
DO NOT recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult supervision.
• AA or LR6-size rechargeable batteries are to be removed from the toy before being charged.
• A Recharging System, including custom designed battery packs for charging the batteries while installed in the
product, is available from LeapFrog.
NOTICE: For Europe and Australia. In accordance with the EU Electric Toy Safety Standard, once installed, the
LeapFrog custom designed rechargeable battery packs cannot be removed from the product. As such, never try to
remove the battery packs as it will render the toy inoperable.
Sécurité relative aux piles
Les piles sont des objets de petite taille. Le remplacement des piles doit être effectué par un adulte. Respectez le
schéma de polarité (+/-) reproduit dans le compartiment des piles. Enlevez rapidement les piles usagées du jouet.
Suivez les procédures adéquates pour vous débarrasser des piles usagées. Retirez les piles en cas de non-usage
prolongé. Utilisez uniquement des piles ou accumulateurs du type recommandé ou d’un type équivalent.
NE PAS incinérer les piles usagées.
NE PAS jeter les piles au feu car elles peuvent exploser ou fuir.
NE PAS mélanger piles usagées et piles neuves, ni différents types de piles (c’est-à-dire alcalines/standard).
NE PAS recharger des piles non rechargeables.
• Les piles rechargeables ne doivent être rechargées que sous la présence directe d’un adulte.
• Les piles rechargeables de tailles AA ou LR06 doivent être retirées avant d’être chargées.
• Un système de recharge LeapFrog incluant des piles rechargeables qui peuvent être chargées en étant installées
dans le produit est disponible à LeapFrog.
NE PAS court-circuiter les terminaux d’alimentation.
NOTE : Pour l’Europe et l’Australie. En raison des standards pour la sécurité des jouets électriques, une fois installés,
les packs de piles rechargeables LeapFrog ne peuvent être retirés du produit. Donc, ne retirez jamais les packs de
piles car cela rendra votre jouet inopérationnel.
Battery Information
Requires 4 AA (called LR6 in some countries) alkaline batteries, not included.
Battery Removal and Installation Instructions
1. Open the battery door by pushing it outward using the thumbs of both hands.
2. If used or spent batteries are present, remove these batteries from the unit by pulling up on one end of
each battery.
3. Install new batteries as shown in the polarity (+/-) diagram inside the battery compartment.
4. Replace battery door securely.
5. For Europe and Australia Only—Please note: Once installed, LeapFrog custom design rechargeable battery packs
are not removable. See NOTICE above.
Power Adapter Safety
(Adapter sold separately; available from LeapFrog Enterprises, Inc.)
This toy is not intended for children under 3 years old.
WARNING:
Adapter cord could be a strangulation hazard.
CAUTION - ELECTRIC TOY
Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed
during the handling and use to prevent electrical shock. FOR INDOOR, DRY-LOCATION USE ONLY.
The transformer is not a toy and should be connected to the wall outlet by an adult. It should be periodically
examined for conditions that may result in the risk of fi re, electrical shock or injury to persons, such as damage to
the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used
until the damage is repaired. The cord of this transformer cannot be replaced; if the cord is damaged, dispose of the
transformer in accordance with your local electrical product recycling regulations.
Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by
children shall be under the full supervision of an adult.
The toy must be used with a transformer for toys.
The toy is not to be connected to more than the recommended number of power supplies.
Toys to be cleaned with a liquid are to be disconnected from the transformer before cleaning.
To clean transformer, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse
in water or use soap or other chemicals. Allow to dry before reusing. Do not connect to the AC outlet if wet or
damaged.
AC Adapter Electrical Ratings:
U.S, CAN Input:
120VAC, 60Hz
U.K. Input: 230V, 50Hz
Australia and New Zealand Input:
240V, 50Hz
Output:
DC9V, 700mA, 6.3VA
Consignes de sécurité pour l’utilisation de l’adaptateur
(Adaptateur vendu séparément; produit LeapFrog Enterprises, Inc.)
Ce jouet ne convient pas aux enfants de moins de 3 ans.
AVERTISSEMENT :
Le cordon de l’adaptateur peut provoquer un risque d’étranglement.
ATTENTION : CE JOUET FONCTIONNE À L’ÉLECTRICITÉ
Ne convient pas aux enfants de moins de 3 ans. Comme tous les objets utilisant du courant électrique, ce produit
doit être manipulé avec précaution pour éviter tout risque de décharge électrique. A UTILISER UNIQUEMENT EN
INTERIEUR, DANS UN ENDROIT SEC.
Le transformateur n’est pas un jouet et il est recommandé que ce soit un adulte qui le branche à la prise murale. Pour
éviter tout danger d’incendie, d’électrocution ou de blessure, veillez à contrôler périodiquement l’état du cordon
électrique, de la fi che d’alimentation électrique, des lames de contact, du boîtier ou de toute autre partie. Dans un tel
cas, le transformateur doit être réparé avant d’être réutilisé. La corde de ce transformateur ne peut pas être remplacé.
Si la corde s’abime, veuillez la jeter en suivant les règles de recyclage locales de produits électriques.
Le transformateur et les outils d’énergie pour les jouets ne doivent pas être utilisés comme des jouets, et l’utilisation
de ces produits par des enfants doit être faite seulement sous la présence d’un adulte.
Ce jouet doit être utilisé avec un transformateur pour jouet.
Le jouet ne doit pas être branché à plus d’accessoires que le nombre recommandé.
Débrancher le jouet de l’adaptateur avant de le nettoyer avec du liquide.
Pour nettoyer l’adaptateur, débranchez-le d’abord de la prise murale et utilisez ensuite un tissu humide pour
le nettoyer.
Voltage de l’adaptateur
Voltage d’entrée pour les Etats-Unis et le Canada :
120VAC, 60Hz
Voltage d’entrée pour le Royaume Uni :
230V, 50Hz
Voltage d’entrée pour l’Australie et la Nouvelle Zélande :
240V, 50Hz
Voltage de sortie :
DC9V, 700mA, 6.3VA
USB Cable
Use only the USB cable provided by LeapFrog Enterprises, Inc. Using any other cable may exceed FCC and other
regulatory emissions limits. The USB cable is not a toy. Disconnect the toy from the USB connection before cleaning.
Câble USB
Utilisez exclusivement le câble USB fourni par LeapFrog Enterprises, Inc. L’utilisation d’un autre câble peut dépasser
les limites de la FCC (Commission fédérale américaine des communications) et autres limites règlementaires en matière
d’émission. Le câble USB n’est pas un jouet. Déconnectez le jouet du port USB avant d’entamer toute opération de nettoyage.
FCC NOTICE:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifi cations to this unit not expressly approved by LeapFrog Enterprises, Inc., could void the
user’s authority to operate the equipment.
Canada: This Class B digital apparatus complies with Canadian ICES-003./ Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when
the interference stops. If not, it may become necessary to turn the power off and back on, or remove and reinstall
the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to
reset the device by removing and reinstalling the batteries.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference.
Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.
Get your included apps when
Visit leapfrog.com/support for additional tips and FAQs.
Microphone
AC adapter port
D-pad
On button
Home
USB port
Cartridge slot
Stylus
Hint
Pause
Volume control
Headphone
FOLD
FOLD
FOLD
Get Started and Download Your Included Apps
1. Install the LeapFrog® Connect Application using the
included CD or visit www.leapfrog.com/connect to
download the installer.
2. Insert batteries and create player profi les (up to 3).
3. Connect the device to your computer and follow the
on-screen prompts.
4. Complete registration and go to the App Center to
download your apps.
Get your included apps when
you complete registration!
Instructions for Care
For Indoor, Dry-Location Use Only.
Keep food and beverages away from product. Do not spill liquid of any kind on this product as it may render it
inoperative. Clean with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never
submerge the unit in water. Allow to dry before reuse. Avoid prolonged exposure to extreme temperatures and direct
sunlight. Avoid dropping the unit. Never try to dismantle it.
A utiliser uniquement en intérieur, dans un endroit sec.
Tenir le produit à l’écart de la nourriture et des boissons. Ne jamais renverser un liquide sur ce produit car cela peut
l’endommager ou en faire cesser son fonctionnement. Nettoyer avec un chiffon légèrement humide (utiliser de
l’eau froide). N’utilisez pas de savon, de lessive, ou d’autres produits chimiques. Ne jamais immerger le produit dans
l’eau. Éviter une exposition prolongée aux températures extrêmes et aux rayons du soleil. Éviter de laisser tomber le
produit. Ne jamais essayer de le démonter.
Parent Controls
When the sign-in menu appears, press the left side of the D-pad and the Hint button at the same time, holding for at
least one second to access the Parent Settings menu. This menu lets you manage player profi les, setup options, reset
curriculum, trailer controls and screen calibration settings.
Touch Screen Calibration
Your LEAPSTER GS EXPLORER™ handheld touch screen has already been calibrated for use, but if you experience
either example below, you may adjust the calibration yourself:
Lines drawn with the stylus appear to be offset from the location of the stylus tip.
Objects you are trying to select are not being chosen.
Follow these steps to calibrate the touch screen:
1. Go to the Parent Settings menu and tap Screen Calibration to select—or hold down
the Hint button during device startup.
2. Touch each of the crosshairs with the stylus as they appear (5 in all).
3. If accessed via the Parent Settings menu, press the X button to exit the Parent
menu and return to the sign-in screen.
Cautions & Warnings
CAUTION:
This toy is not intended for children under 3 years old.
ATTENTION :
Ce jouet ne convient pas aux enfants de moins de 3 ans.
CAUTION:
Routinely check this toy for proper and safe condition. If there is any damage or broken parts,
remove toy from use.
ATTENTION :
Vérifi ez régulièrement que ce jouet est en bon état et qu’il ne présente pas de danger. Dans
le cas contraire (par exemple, s’il est cassé à certains endroits), tenez ce jouet hors de portée des enfants.
CAUTION:
If for any reason the screen (display) is fractured or cracked, immediately remove this product
from use and contact LeapFrog Consumer Services for replacement if under warranty.
ATTENTION :
Si pour quelque raison que ce soit, l’écran (d’affi chage) est brisé ou fendu, mettez
immédiatement ce produit hors de portée des enfants. Contactez ensuite le Service clientèle de LeapFrog pour qu’il
soit remplacé (si ce produit est sous garantie).
WARNING: Cords could be a strangulation hazard. Keep out of reach of children under 3 years of age. Children pulling on
the cord could cause the computer monitor, TV or other equipment to which the device is connected to fall with the possibility of
property damage, serious personal injury or death.
AVERTISSEMENT :
Les cordons peuvent représenter un risque d’étranglement. Tenez-les hors de portée
des enfants de moins de 3 ans. En tirant sur le cordon, un enfant peut causer la chute de l’écran de l’ordinateur, de
la télévision ou d’un autre appareil connecté à ce dispositif et provoquer des risques de dommages matériels, de
blessures graves, voire même la mort.
PROTECT YOUR HEARING
Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones
or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the
volume while in a quiet environment; turn the volume down if you cannot hear people speaking near you. Limit the
listening time to 90 minutes, followed by a quiet period. The louder the volume, the less time required before your
hearing may be affected. If you experience ringing in your ears or hear muffl ed speech, stop listening and have your
hearing checked.
PROTÉGEZ VOTRE OUÏE
Une exposition durable à des sonorités trop fortes peut entraîner une perte défi nitive de l’ouïe. Lorsque vous utilisez le
casque ou les écouteurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez le son lorsque
vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les personnes qui parlent autour de vous. Limitez
le temps d’écoute à 90 minutes, puis accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de
chances que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou si vous entendez des
voix sourdes, arrêtez immédiatement d’écouter ce produit et faites contrôler votre ouïe dans les plus brefs délais.
WARNING: It is rare but possible for seizures to be triggered by light fl ashes or patterns such as those on computer or
TV screens. To reduce exposure to this potential hazard, play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
AVERTISSEMENT :
Il peut arriver que certaines personnes soient sujettes à une attaque sous l’effet d’une
lumière vive ou d’un jeu de lumières provenant de l’écran d’un téléviseur ou d’un ordinateur. Pour réduire ce risque,
utilisez dans une pièce suffi samment éclairée et faites une pause toutes les heures, pendant 10 à 15 minutes.
Battery Safety
Batteries are small objects. Batteries must be replaced by an adult. Follow the polarity (+/-) diagram in the battery
compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for
prolonged storage. Only batteries of the same or equivalent type as recommended are to be used.
DO NOT incinerate used batteries.
DO NOT
dispose of batteries in fi re, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (e.g., alkaline/standard).
DO NOT short-circuit the supply terminals.
DO NOT recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult supervision.
• AA or LR6-size rechargeable batteries are to be removed from the toy before being charged.
• A Recharging System, including custom designed battery packs for charging the batteries while installed in the
product, is available from LeapFrog.
NOTICE: For Europe and Australia. In accordance with the EU Electric Toy Safety Standard, once installed, the
LeapFrog custom designed rechargeable battery packs cannot be removed from the product. As such, never try to
remove the battery packs as it will render the toy inoperable.
Sécurité relative aux piles
Les piles sont des objets de petite taille. Le remplacement des piles doit être effectué par un adulte. Respectez le
schéma de polarité (+/-) reproduit dans le compartiment des piles. Enlevez rapidement les piles usagées du jouet.
Suivez les procédures adéquates pour vous débarrasser des piles usagées. Retirez les piles en cas de non-usage
prolongé. Utilisez uniquement des piles ou accumulateurs du type recommandé ou d’un type équivalent.
NE PAS incinérer les piles usagées.
NE PAS jeter les piles au feu car elles peuvent exploser ou fuir.
NE PAS mélanger piles usagées et piles neuves, ni différents types de piles (c’est-à-dire alcalines/standard).
NE PAS recharger des piles non rechargeables.
• Les piles rechargeables ne doivent être rechargées que sous la présence directe d’un adulte.
• Les piles rechargeables de tailles AA ou LR06 doivent être retirées avant d’être chargées.
• Un système de recharge LeapFrog incluant des piles rechargeables qui peuvent être chargées en étant installées
dans le produit est disponible à LeapFrog.
NE PAS court-circuiter les terminaux d’alimentation.
NOTE : Pour l’Europe et l’Australie. En raison des standards pour la sécurité des jouets électriques, une fois installés,
les packs de piles rechargeables LeapFrog ne peuvent être retirés du produit. Donc, ne retirez jamais les packs de
piles car cela rendra votre jouet inopérationnel.
Battery Information
Requires 4 AA (called LR6 in some countries) alkaline batteries, not included.
Battery Removal and Installation Instructions
1. Open the battery door by pushing it outward using the thumbs of both hands.
2. If used or spent batteries are present, remove these batteries from the unit by pulling up on one end of
each battery.
3. Install new batteries as shown in the polarity (+/-) diagram inside the battery compartment.
4. Replace battery door securely.
5. For Europe and Australia Only—Please note: Once installed, LeapFrog custom design rechargeable battery packs
are not removable. See NOTICE above.
Power Adapter Safety
(Adapter sold separately; available from LeapFrog Enterprises, Inc.)
This toy is not intended for children under 3 years old.
WARNING:
Adapter cord could be a strangulation hazard.
CAUTION - ELECTRIC TOY
Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed
during the handling and use to prevent electrical shock. FOR INDOOR, DRY-LOCATION USE ONLY.
The transformer is not a toy and should be connected to the wall outlet by an adult. It should be periodically
examined for conditions that may result in the risk of fi re, electrical shock or injury to persons, such as damage to
the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used
until the damage is repaired. The cord of this transformer cannot be replaced; if the cord is damaged, dispose of the
transformer in accordance with your local electrical product recycling regulations.
Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by
children shall be under the full supervision of an adult.
The toy must be used with a transformer for toys.
The toy is not to be connected to more than the recommended number of power supplies.
Toys to be cleaned with a liquid are to be disconnected from the transformer before cleaning.
To clean transformer, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse
in water or use soap or other chemicals. Allow to dry before reusing. Do not connect to the AC outlet if wet or
damaged.
AC Adapter Electrical Ratings:
U.S, CAN Input:
120VAC, 60Hz
U.K. Input:
230V, 50Hz
Australia and New Zealand Input:
240V, 50Hz
Output:
DC9V, 700mA, 6.3VA
Consignes de sécurité pour l’utilisation de l’adaptateur
(Adaptateur vendu séparément; produit LeapFrog Enterprises, Inc.)
Ce jouet ne convient pas aux enfants de moins de 3 ans.
AVERTISSEMENT :
Le cordon de l’adaptateur peut provoquer un risque d’étranglement.
ATTENTION : CE JOUET FONCTIONNE À L’ÉLECTRICITÉ
Ne convient pas aux enfants de moins de 3 ans. Comme tous les objets utilisant du courant électrique, ce produit
doit être manipulé avec précaution pour éviter tout risque de décharge électrique. A UTILISER UNIQUEMENT EN
INTERIEUR, DANS UN ENDROIT SEC.
Le transformateur n’est pas un jouet et il est recommandé que ce soit un adulte qui le branche à la prise murale. Pour
éviter tout danger d’incendie, d’électrocution ou de blessure, veillez à contrôler périodiquement l’état du cordon
électrique, de la fi che d’alimentation électrique, des lames de contact, du boîtier ou de toute autre partie. Dans un tel
cas, le transformateur doit être réparé avant d’être réutilisé. La corde de ce transformateur ne peut pas être remplacé.
Si la corde s’abime, veuillez la jeter en suivant les règles de recyclage locales de produits électriques.
Le transformateur et les outils d’énergie pour les jouets ne doivent pas être utilisés comme des jouets, et l’utilisation
de ces produits par des enfants doit être faite seulement sous la présence d’un adulte.
Ce jouet doit être utilisé avec un transformateur pour jouet.
Le jouet ne doit pas être branché à plus d’accessoires que le nombre recommandé.
Débrancher le jouet de l’adaptateur avant de le nettoyer avec du liquide.
Pour nettoyer l’adaptateur, débranchez-le d’abord de la prise murale et utilisez ensuite un tissu humide pour
le nettoyer.
Voltage de l’adaptateur
Voltage d’entrée pour les Etats-Unis et le Canada :
120VAC, 60Hz
Voltage d’entrée pour le Royaume Uni :
230V, 50Hz
Voltage d’entrée pour l’Australie et la Nouvelle Zélande :
240V, 50Hz
Voltage de sortie :
DC9V, 700mA, 6.3VA
USB Cable
Use only the USB cable provided by LeapFrog Enterprises, Inc. Using any other cable may exceed FCC and other
regulatory emissions limits. The USB cable is not a toy. Disconnect the toy from the USB connection before cleaning.
Câble USB
Utilisez exclusivement le câble USB fourni par LeapFrog Enterprises, Inc. L’utilisation d’un autre câble peut dépasser
les limites de la FCC (Commission fédérale américaine des communications) et autres limites règlementaires en matière
d’émission. Le câble USB n’est pas un jouet. Déconnectez le jouet du port USB avant d’entamer toute opération de nettoyage.
FCC NOTICE:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifi cations to this unit not expressly approved by LeapFrog Enterprises, Inc., could void the
user’s authority to operate the equipment.
Canada: This Class B digital apparatus complies with Canadian ICES-003./ Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when
the interference stops. If not, it may become necessary to turn the power off and back on, or remove and reinstall
the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to
reset the device by removing and reinstalling the batteries.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference.
Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.
Get your included apps when
Visit leapfrog.com/support for additional tips and FAQs.
Microphone
AC adapter port
D-pad
On button
Home
USB port
Cartridge slot
Stylus
Hint
Pause
Volume control
Headphone
FOLD
FOLD
FOLD
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait reprendre avec l’arrêt des interférences. Si ce
n’est pas le cas, il peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
Dans l’éventualité peu probable d’une décharge électrostatique, un mauvais fonctionnement et une perte de
mémoire de l’appareil peuvent se produire. L’utilisateur doit alors retirer et réinstaller les piles pour réinitialiser
l’appareil.
Certain software included in this product contains copyrighted software that is licensed under the General Public
License (GPL). A copy of that license is included below in this document. Anyone may obtain from us the complete
corresponding source code for the software covered by the GPL for a period of three years after our last shipment of
this product by contacting LeapFrog customer service at support@leapfrog.com.
Please write “GPL source code for LeapsterGS Explorer” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the physical media on which the
source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure
the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s
software and to any other program whose authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modifi ed by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems introduced by others will not refl ect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modifi cation follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program,” below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifi cations and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modifi cation.”) Each licensee is
addressed as “you.
Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifi cations or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modifi ed fi les to carry prominent notices stating that you changed the fi les and the date
of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from
the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of
this License.
c) If the modifi ed program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute
the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be
on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of
this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifi cations to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface
defi nition fi les, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program),
you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives
a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program specifi es a version number of this License which
applies to it and “any later version,” you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions
are different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING, THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CONSUMER SUPPORT
U.S. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.com/support 24 hours a day.
Canada Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.ca/support 24 hours a day.
U.K. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.co.uk/support 24 hours a day.
Australia Consumer Service Contact: Please submit questions to our support staff via email at
LIMITED WARRANTY: Subject to a limited three (3) month warranty. Visit our website at www.leapfrog.com for
full details of the warranty provided in your country. LeapFrog shall not be liable for any incidental or consequential
damages for the breach of any warranty on this product. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
GARANTIE LIMITÉE : Ce produit est soumis à une garantie limitée de trois (3) mois. Veuillez consulter notre site
Web à l’adresse www.leapfrog.com pour obtenir l’intégralité des informations de garantie fournies dans votre pays.
LeapFrog ne sera pas tenu responsable des dommages consécutifs ou indirects induits par la violation de toute
garantie sur ce produit. Certaines juridictions n’autorisant pas l’exclusion ou la limitation des dommages consécutifs
ou indirects, ni même la limitation de la durée des garanties implicites, il est donc possible que les limitations ou
exclusions ci-dessus ne s’appliquent pas à votre cas.
For information on how this product might be recycled, visit www.leapfrog.com/recycle or call
(800) 701-5327.
TM & © 2012 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com
For ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
LeapsterGS Explorer
Model: 39700 and 39800
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
LeapsterGS Explorer
Item number: 39700 & 39800
Part number: 605-11872-A
Art number: 810-22446-A
FOLD
FOLD
FOLD
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait reprendre avec l’arrêt des interférences. Si ce
n’est pas le cas, il peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
Dans l’éventualité peu probable d’une décharge électrostatique, un mauvais fonctionnement et une perte de
mémoire de l’appareil peuvent se produire. L’utilisateur doit alors retirer et réinstaller les piles pour réinitialiser
l’appareil.
Certain software included in this product contains copyrighted software that is licensed under the General Public
License (GPL). A copy of that license is included below in this document. Anyone may obtain from us the complete
corresponding source code for the software covered by the GPL for a period of three years after our last shipment of
this product by contacting LeapFrog customer service at support@leapfrog.com.
Please write “GPL source code for LeapsterGS Explorer” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the physical media on which the
source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure
the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s
software and to any other program whose authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modifi ed by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems introduced by others will not refl ect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modifi cation follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program,” below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifi cations and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modifi cation.”) Each licensee is
addressed as “you.
Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifi cations or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a)
You must cause the modifi ed fi les to carry prominent notices stating that you changed the fi les and the date
of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from
the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of
this License.
c) If the modifi ed program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute
the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be
on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of
this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifi cations to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface
defi nition fi les, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program),
you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives
a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program specifi es a version number of this License which
applies to it and “any later version,” you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions
are different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING, THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CONSUMER SUPPORT
U.S. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.com/support 24 hours a day.
Canada Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.ca/support 24 hours a day.
U.K. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.co.uk/support 24 hours a day.
Australia Consumer Service Contact: Please submit questions to our support staff via email at
LIMITED WARRANTY: Subject to a limited three (3) month warranty. Visit our website at www.leapfrog.com for
full details of the warranty provided in your country. LeapFrog shall not be liable for any incidental or consequential
damages for the breach of any warranty on this product. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
GARANTIE LIMITÉE : Ce produit est soumis à une garantie limitée de trois (3) mois. Veuillez consulter notre site
Web à l’adresse www.leapfrog.com pour obtenir l’intégralité des informations de garantie fournies dans votre pays.
LeapFrog ne sera pas tenu responsable des dommages consécutifs ou indirects induits par la violation de toute
garantie sur ce produit. Certaines juridictions n’autorisant pas l’exclusion ou la limitation des dommages consécutifs
ou indirects, ni même la limitation de la durée des garanties implicites, il est donc possible que les limitations ou
exclusions ci-dessus ne s’appliquent pas à votre cas.
For information on how this product might be recycled, visit www.leapfrog.com/recycle or call
(800) 701-5327.
TM & © 2012 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com
For ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
LeapsterGS Explorer
Model: 39700 and 39800
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
LeapsterGS Explorer
Item number: 39700 & 39800
Part number: 605-11872-A
Art number: 810-22446-A
FOLD
FOLD
FOLD
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait reprendre avec l’arrêt des interférences. Si ce
n’est pas le cas, il peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
Dans l’éventualité peu probable d’une décharge électrostatique, un mauvais fonctionnement et une perte de
mémoire de l’appareil peuvent se produire. L’utilisateur doit alors retirer et réinstaller les piles pour réinitialiser
l’appareil.
Certain software included in this product contains copyrighted software that is licensed under the General Public
License (GPL). A copy of that license is included below in this document. Anyone may obtain from us the complete
corresponding source code for the software covered by the GPL for a period of three years after our last shipment of
this product by contacting LeapFrog customer service at support@leapfrog.com.
Please write “GPL source code for LeapsterGS Explorer” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the physical media on which the
source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure
the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s
software and to any other program whose authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modifi ed by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems introduced by others will not refl ect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modifi cation follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program,” below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifi cations and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modifi cation.”) Each licensee is
addressed as “you.
Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifi cations or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modifi ed fi les to carry prominent notices stating that you changed the fi les and the date
of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from
the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of
this License.
c) If the modifi ed program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute
the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be
on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of
this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifi cations to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface
defi nition fi les, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program),
you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives
a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program specifi es a version number of this License which
applies to it and “any later version,” you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions
are different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING, THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CONSUMER SUPPORT
U.S. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.com/support 24 hours a day.
Canada Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.ca/support 24 hours a day.
U.K. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.co.uk/support 24 hours a day.
Australia Consumer Service Contact: Please submit questions to our support staff via email at
LIMITED WARRANTY: Subject to a limited three (3) month warranty. Visit our website at www.leapfrog.com for
full details of the warranty provided in your country. LeapFrog shall not be liable for any incidental or consequential
damages for the breach of any warranty on this product. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
GARANTIE LIMITÉE : Ce produit est soumis à une garantie limitée de trois (3) mois. Veuillez consulter notre site
Web à l’adresse www.leapfrog.com pour obtenir l’intégralité des informations de garantie fournies dans votre pays.
LeapFrog ne sera pas tenu responsable des dommages consécutifs ou indirects induits par la violation de toute
garantie sur ce produit. Certaines juridictions n’autorisant pas l’exclusion ou la limitation des dommages consécutifs
ou indirects, ni même la limitation de la durée des garanties implicites, il est donc possible que les limitations ou
exclusions ci-dessus ne s’appliquent pas à votre cas.
For information on how this product might be recycled, visit www.leapfrog.com/recycle or call
(800) 701-5327.
TM & © 2012 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com
For ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
LeapsterGS Explorer
Model: 39700 and 39800
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
LeapsterGS Explorer
Item number: 39700 & 39800
Part number: 605-11872-A
Art number: 810-22446-A
FOLD
FOLD
FOLD
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait reprendre avec l’arrêt des interférences. Si ce
n’est pas le cas, il peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
Dans l’éventualité peu probable d’une décharge électrostatique, un mauvais fonctionnement et une perte de
mémoire de l’appareil peuvent se produire. L’utilisateur doit alors retirer et réinstaller les piles pour réinitialiser
l’appareil.
Certain software included in this product contains copyrighted software that is licensed under the General Public
License (GPL). A copy of that license is included below in this document. Anyone may obtain from us the complete
corresponding source code for the software covered by the GPL for a period of three years after our last shipment of
this product by contacting LeapFrog customer service at support@leapfrog.com.
Please write “GPL source code for LeapsterGS Explorer” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the physical media on which the
source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure
the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s
software and to any other program whose authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modifi ed by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems introduced by others will not refl ect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modifi cation follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program,” below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifi cations and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modifi cation.”) Each licensee is
addressed as “you.
Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifi cations or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modifi ed fi les to carry prominent notices stating that you changed the fi les and the date
of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from
the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of
this License.
c) If the modifi ed program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute
the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be
on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of
this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifi cations to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface
defi nition fi les, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program),
you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives
a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
7.
If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program specifi es a version number of this License which
applies to it and “any later version,” you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions
are different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING, THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CONSUMER SUPPORT
U.S. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.com/support 24 hours a day.
Canada Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.ca/support 24 hours a day.
U.K. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.co.uk/support 24 hours a day.
Australia Consumer Service Contact: Please submit questions to our support staff via email at
LIMITED WARRANTY: Subject to a limited three (3) month warranty. Visit our website at www.leapfrog.com for
full details of the warranty provided in your country. LeapFrog shall not be liable for any incidental or consequential
damages for the breach of any warranty on this product. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
GARANTIE LIMITÉE : Ce produit est soumis à une garantie limitée de trois (3) mois. Veuillez consulter notre site
Web à l’adresse www.leapfrog.com pour obtenir l’intégralité des informations de garantie fournies dans votre pays.
LeapFrog ne sera pas tenu responsable des dommages consécutifs ou indirects induits par la violation de toute
garantie sur ce produit. Certaines juridictions n’autorisant pas l’exclusion ou la limitation des dommages consécutifs
ou indirects, ni même la limitation de la durée des garanties implicites, il est donc possible que les limitations ou
exclusions ci-dessus ne s’appliquent pas à votre cas.
For information on how this product might be recycled, visit www.leapfrog.com/recycle or call
(800) 701-5327.
TM & © 2012 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com
For ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
LeapsterGS Explorer
Model: 39700 and 39800
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
LeapsterGS Explorer
Item number: 39700 & 39800
Part number: 605-11872-A
Art number: 810-22446-A
FOLD
FOLD
FOLD
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait reprendre avec l’arrêt des interférences. Si ce
n’est pas le cas, il peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
Dans l’éventualité peu probable d’une décharge électrostatique, un mauvais fonctionnement et une perte de
mémoire de l’appareil peuvent se produire. L’utilisateur doit alors retirer et réinstaller les piles pour réinitialiser
l’appareil.
Certain software included in this product contains copyrighted software that is licensed under the General Public
License (GPL). A copy of that license is included below in this document. Anyone may obtain from us the complete
corresponding source code for the software covered by the GPL for a period of three years after our last shipment of
this product by contacting LeapFrog customer service at support@leapfrog.com.
Please write “GPL source code for LeapsterGS Explorer” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the physical media on which the
source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure
the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s
software and to any other program whose authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modifi ed by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems introduced by others will not refl ect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modifi cation follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program,” below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifi cations and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modifi cation.”) Each licensee is
addressed as “you.
Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifi cations or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modifi ed fi les to carry prominent notices stating that you changed the fi les and the date
of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from
the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of
this License.
c) If the modifi ed program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute
the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be
on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of
this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifi cations to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface
defi nition fi les, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program),
you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives
a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program specifi es a version number of this License which
applies to it and “any later version,” you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions
are different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING, THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CONSUMER SUPPORT
U.S. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.com/support 24 hours a day.
Canada Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.ca/support 24 hours a day.
U.K. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.co.uk/support 24 hours a day.
Australia Consumer Service Contact: Please submit questions to our support staff via email at
LIMITED WARRANTY: Subject to a limited three (3) month warranty. Visit our website at www.leapfrog.com for
full details of the warranty provided in your country. LeapFrog shall not be liable for any incidental or consequential
damages for the breach of any warranty on this product. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
GARANTIE LIMITÉE : Ce produit est soumis à une garantie limitée de trois (3) mois. Veuillez consulter notre site
Web à l’adresse www.leapfrog.com pour obtenir l’intégralité des informations de garantie fournies dans votre pays.
LeapFrog ne sera pas tenu responsable des dommages consécutifs ou indirects induits par la violation de toute
garantie sur ce produit. Certaines juridictions n’autorisant pas l’exclusion ou la limitation des dommages consécutifs
ou indirects, ni même la limitation de la durée des garanties implicites, il est donc possible que les limitations ou
exclusions ci-dessus ne s’appliquent pas à votre cas.
For information on how this product might be recycled, visit www.leapfrog.com/recycle or call
(800) 701-5327.
TM & © 2012 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com
For ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
LeapsterGS Explorer
Model: 39700 and 39800
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
LeapsterGS Explorer
Item number: 39700 & 39800
Part number: 605-11872-A
Art number: 810-22446-A
FOLD
FOLD
FOLD
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait reprendre avec l’arrêt des interférences. Si ce
n’est pas le cas, il peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
Dans l’éventualité peu probable d’une décharge électrostatique, un mauvais fonctionnement et une perte de
mémoire de l’appareil peuvent se produire. L’utilisateur doit alors retirer et réinstaller les piles pour réinitialiser
l’appareil.
Certain software included in this product contains copyrighted software that is licensed under the General Public
License (GPL). A copy of that license is included below in this document. Anyone may obtain from us the complete
corresponding source code for the software covered by the GPL for a period of three years after our last shipment of
this product by contacting LeapFrog customer service at support@leapfrog.com.
Please write “GPL source code for LeapsterGS Explorer” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the physical media on which the
source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure
the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s
software and to any other program whose authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modifi ed by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems introduced by others will not refl ect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modifi cation follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program,” below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifi cations and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modifi cation.”) Each licensee is
addressed as “you.
Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifi cations or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modifi ed fi les to carry prominent notices stating that you changed the fi les and the date
of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from
the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of
this License.
c) If the modifi ed program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute
the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be
on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of
this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifi cations to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface
defi nition fi les, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program),
you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives
a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program specifi es a version number of this License which
applies to it and “any later version,” you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions
are different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING, THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CONSUMER SUPPORT
U.S. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.com/support 24 hours a day.
Canada Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.ca/support 24 hours a day.
U.K. Consumer Service Contact: Visit our Consumer Support website at
www.leapfrog.co.uk/support 24 hours a day.
Australia Consumer Service Contact: Please submit questions to our support staff via email at
LIMITED WARRANTY: Subject to a limited three (3) month warranty. Visit our website at www.leapfrog.com for
full details of the warranty provided in your country. LeapFrog shall not be liable for any incidental or consequential
damages for the breach of any warranty on this product. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
GARANTIE LIMITÉE : Ce produit est soumis à une garantie limitée de trois (3) mois. Veuillez consulter notre site
Web à l’adresse www.leapfrog.com pour obtenir l’intégralité des informations de garantie fournies dans votre pays.
LeapFrog ne sera pas tenu responsable des dommages consécutifs ou indirects induits par la violation de toute
garantie sur ce produit. Certaines juridictions n’autorisant pas l’exclusion ou la limitation des dommages consécutifs
ou indirects, ni même la limitation de la durée des garanties implicites, il est donc possible que les limitations ou
exclusions ci-dessus ne s’appliquent pas à votre cas.
For information on how this product might be recycled, visit www.leapfrog.com/recycle or call
(800) 701-5327.
TM & © 2012 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com
For ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
LeapsterGS Explorer
Model: 39700 and 39800
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
LeapsterGS Explorer
Item number: 39700 & 39800
Part number: 605-11872-A
Art number: 810-22446-A
FOLD
FOLD
FOLD
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

LeapFrog Leapster GS Explorer Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à