Maytag MHW4200BG0 Le manuel du propriétaire

Marque: Maytag

Modèle: MHW4200BG0

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

ide

Care ide

d'utilisationet d'entretien

FRONT-LOADINGAUTOMATICWASHER

LAVEUSEAUTOiViATIQUEDECHARGEMENTFRONTAL

Dara obtener acceso

al Manual de uso y cuidado

en espafiol, o para obtener

informaci6n adicional acerca

de su producto visite:

www.maytag.com

If you have any problems or questions, visit us at www.maytag.com

Pour tout probleme ou question, consulter www.maytag.ca

Designed to use only HE

High Efficiency detergents.

Con_ue pour rutilisation

d'un d_tergent haute

efficacit6 seulement.

_ ertified to Reduce Allergens

Homologue pour reduire la presence

d'allergenes

W10441130D

W10441131D - SP

TABLEOFCONTENTS

WASHERSAFETY...................................................................................2

ACCESSORIES........................................................................................3

CONTROL PANELAND FEATURES..................................................4

USINGTHE DISPENSERDRAWER...................................................6

CYCLEGUIDE..........................................................................................7

USINGYOURWASHER........................................................................9

WASHERMAINTENANCE.................................................................13

TROUBLESHOOTING.........................................................................16

WARRANTY............................................................................................23

ASSISTANCEORSERVICE.............................................Back Cover

TABLEDE MATIERES

SECURITEDELALAVEUSE..............................................................24

ACCESSOIRES.....................................................................................25

TABLEAUDECOMMANDEETCARACTERISTIQUES.............26

UTILISATIONDU TIROIRDU DISTRIBUTEUR..............................29

GUIDEDEPROGRAMMES...............................................................29

UTILISATIONDE LA LAVEUSE.........................................................32

ENTRETIENDE LA LAVEUSE............................................................36

DEPANNAGE ......................................................................................... 39

GARANTIE..............................................................................................47

ASSISTANCEOU SERVICE.................................. Couverturearri_re

WASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or

"WARNING." These words mean:

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry=cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry=cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. Ifthe hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach intothe washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" located in the installation

instructionsfor grounding instructions.

this time.

SAVE THESE iNSTRUCTiONS

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

ACCESSORIES

Customize your new washer and dryer with the following

genuine Maytag accessories. For more information on options

and ordering, contact your dealer, call us at 1-800=901-2042,

or visit: www.maytag.com/accessories.

In Canada, call 1-800=807-6777, or visit: www.maytag.ca.

15" Pedestal

Color-matched pedestals raise the washer

and dryer to a more comfortable working

height. The large drawer provides convenient

storage.

Worksurface

The worksurface bridges the

washer and dryer, and provides

a convenient working and storage

area.

Stack Kit

If space is at a premium,

the stack kit allows the dryer

to be installed on top of

the washer.

CONTROLPANELAND FEATURES

Not all features and cycles are available on all models.

NOTE: The control panel features a sensitive surface that responds

to a light touch of your finger. To ensure your selections are registered,

touch the control panel with your finger tip, not your fingernail. When

selecting a setting or option, simply touch its name.

Model MHW4200

0 POWER/CANCEL

Touch to turn the washer on and off. Touch to stop/cancel

a cycle at any time.

WASH CYCLE KNOB

Use your Wash Cycle knob to select available cycles on your

washer. Turn the knob to select a cycle for your laundry load.

An LED will light up for the cycle selected.

NOTE: The Clean Washer LED will flash when the washer has run

30 wash cycles as a reminder to run the Clean Washer cycle.

See "Cycle Guide" for detailed descriptions of cycles.

START

Touch and hold until the light above START comes on to start

a cycle, or touch once while a cycle is in process to pause it.

If you want to add a garment, you can touch START when the

"Add a Garment" LED is on.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and the

Estimated Cycle Time will be displayed. Factors such as load

size, wash temperature, and water pressure may affect the time

shown in the display during the cycle. Tightly packing garments,

unbalanced loads, or excessive suds may cause the washer to

adjust the cycle time, as well.

Touch the desired option along the right of the display to adjust

settings. See "Cycle Guide" for available settings on each cycle.

Not all settings are available with all cycles.

Tern pe ratu re

The recommended wash temperature is preset for each cycle.

You may also select a wash temperature based on the type

of fabric and soils being washed. For best results, follow the

garment label instructions. All wash temperatures feature a

cold rinse.

Soil Level

The Soil Level setting (wash time) is preset for each wash cycle.

For most loads, use this preset soil level. When you change

the soil setting, the cycle time will increase or decrease in the

Estimated Cycle Time display.

For heavily soiled and sturdy fabrics, use the Soil Level setting

to select more wash time. For lightly soiled and delicate

fabrics, use the Soil Level setting to select less wash time.

Lower soil level settings will help reduce tangling and wrinkling.

Spin Speed

This washer automatically selects the spin speed based on the

cycle selected. Some preset speeds can be changed.

[] Higher spin speeds mean shorter dry times, but may

increase wrinkling in your load.

[] Lower spin speeds reduce wrinkling, but will leave

your load more damp.

DELAY START

Use + and - to delay the start of the wash cycle by up to

12 hours. To turn off Delay Start, use + and - to set the delay

time to "0," or touch POWER/CANCEL

CYCLE STATUS LIGHTS

For details, see "Cycle Status Lights".

OPTIONS

Touch to activate additional wash options or additional features on

the washer. Not all options areavailable on all models.

_ Steam for Stains

The Steam for Stains option adds additional soak and

wash time to many cycles to help remove tough stains, as well

as a steam boost for added cleaning power. An integrated

heater helps to maintain optimal wash temperatures. See

the "Cycle Guide" for cycles that allow the Steam for Stains

option.

_ Extra Rinse

Activate this option to add anextra rinse to most cycles.

NOTE:Some cycles include this feature asa default.

See "Cycle Guide" for details.

_ resh Spin" Option

The Fresh Spin T''option will periodically tumble the load after

the end of the cycle for up to 6 hours to reduce humidity.

To turn on the Fresh Spin 'Moption, touch Fresh Spin.

If, however, the Fresh Spin TM option is turned on, it will stay

on for all future cycles until turned back off - the washer

remembers the last on/off status set. To turn off the Fresh

Spin 'Moption, touch Fresh Spin.

You may also activate the Fresh Spin 'Moption without running

a cycle by touching and holding POWER/CANCEL for one

second, then touching and holding Fresh Spin for 3 seconds,

then touching and holding START for 3 seconds.

To turn off the Fresh Spin TM option when it is running, touch

POWER/CANCEL

NOTE: The door will lock while the FreshSpin TM option is

active. To cancel the option and unlock the door, touch

POWER/CANCEL

_ ycle Signal

Use this option to turn on or off the signal that sounds at end

of cycle.

To turn off the tones that sound when a setting is touched:

Touch and hold CYCLE SIGNAL for about 3 seconds.

Repeat to turn them on.

_ ontrol Lock

Touch and hold for 3 seconds to lock the controls to avoid

unwanted changes or operation. Touch and hold 3 seconds

again to unlock. You can still touch START to pause the cycle,

or touch POWER/CANCEL to turn the washer off.

)___---__ HE detergent

_ Liquid fabric

softener

_ Chlorine bleach

DISPENSER DRAWER

The dispenser drawer gives you the convenience of automatically

adding HE detergent, liquid chlorine bleach, and liquid fabric

softener to the wash load at the proper time. See "Using the

Dispenser Drawer" for information on using the dispenser drawer.

High Efficiency "HE" detergent compartment

This compartment holds liquid or powdered HE detergent for

your main wash cycle.

_ iquid fabric softener compartment

Automatically dilutes and dispenses liquid fabric softener at

the optimum time in the cycle.

[] Use only liquid fabric softener in this dispenser.

Liquid chlorine bleach compartment

Automatically dilutes and dispenses liquid chlorine bleach at

the optimum time during the first rinse after the wash cycle.

This compartment cannot dilute powdered bleach.

Choosing the Right Detergent

Use only High Efficiency detergents. The package will be marked

"HE" or "High Efficiency." Low-water washing creates excessive

sudsing with a non-HE detergent. Using non-HE detergent will likely

result in longer cycle times and reduced rinsing performance. It may

also result in component failure and, over time, buildup of mold or

mildew. HE detergents are low-sudsing and quick-dispersing to

produce the right amount of suds for the best performance. They

hold soil in suspension so it is not re-deposked onto clean clothes.

Follow the manufacturer's instructions to determine the amount of

detergent to use.

Use only High Efficiency (HE) detergent.

Cycle Status Lights

Delay

If a Delay Start is set, the Delay indicator will light

and the delay time will count down in the display.

Door Locked

Door Locked will light to indicate that the door

is locked and cannot be opened without first

pausing or canceling the cycle.

Sensing

When START is touched and held, the washer

will first perform a self-test on the door lock

mechanism and the sensing light will come on.

You will hear a click, the drum will make a partial

turn, and the door will unlock briefly before locking again.

Once the door has locked the second time, the washer will drain

to calibrate the sensors; then it will begin tumbling and adding

water. The sensing process will continue throughout the cycle.

You may also hear water flowing through the dispenser, adding

detergent to the load.

After the load size is sensed, the estimated time based on load

size will be displayed. The actual cycle time may be lengthened;

however, the display will continue to show the estimated time.

The sensing light will blink once a second at various times during

the cycle, such as when the washer is reducing extra suds.

Add a Garment

When "Add a Garment" is lit, you may pause the washer,

open the door, and add items.

Steaming

This will light to show that the cycle is using a steam boost

for added cleaning power.

Done

Once the cycle is complete, this light will come on. Remove the

load promptly for best results. The Done indicator is also lit during

Fresh Spin T`'option.

USINGTHEDISPENSERDRAWER

1. Open the dispenser drawer.

2. Add laundry products as described in steps 4-6 in the

"Using Your Washer" section.

3. Slowly close the dispenser drawer. Make sure it is

compJetely closed.

NOTE: A smalJ amount of water may remain in the dispensers from

the previous wash cycle. This is normal.

HE detergent to dispenser

Selector

',HE detergent

compartment

Pour a measured amount of HE

detergent into detergent compartment.

For powdered detergent, lift the selector

to the high position. For liquid detergent,

push down the selector to the low

position.

Use only High Efficiency

(HE) detergent,

Powdered detergent:

Lift the selector to the high

position.

Selector._. i_ i'-. J'>-'- _,_

Liquid detergent:

Push down the selector to the

low position.

Do not overfill; adding too much detergent may cause

detergent to be dispensed into the washer too early.

IMPORTANT:

III Do not add single-dose laundry packet to dispenser drawer.

III Use powdered detergent when using the Delay Start option.

Liquid detergent may seep out before the wash begins.

CYCLEGUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best

fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES:

m Not all cycles, temperatures, options, or spin speeds are available on all models.

m All wash temperature selections feature a cold rinse.

m Not all temperatures, spin speeds, or soil levels are labeled on the control panel.

_ Items to wash I

using default I _cle: _ Wash, Spin Soil Available I Cycle Details:

cycle settings: lempera_ure: Speed: Level: Options: '

Normally soiled cottons, Normal Extra Hot Extra High Extra Heavy Steam for Stains* _ This cycle combines medium-speed

linens, sheets, and Hot Med Med Fresh Spin TM _ tumbling and an extra-high-speed

mixed garment loads Warm Light Extra Rinse spin. This cycle is designed to

Cool Delay Start provide the most energy efficiency.

Cold

Cold Cold Extra High Extra Heavy Fresh Spin TM _ This cycle uses a concentrated

Wash Med Med Extra Rinse _ detergent solution along with cold

Bright or darkly

colored cottons,

linens, casual and

mixed loads

Lightly soiled shirts,

blouses, trousers, pants

and dresses

Sheer fabrics, lingerie,

sweaters, and lightly-

soiled shirts, blouses,

trousers, pants, and

skirts

Normaly soiled sheets,

pillowcases, light

blankets, or throws

Small loads of

3-4 lightly soiled

garments

No clothes in washer

Light Delay Start water throughout the cycle to gently

lift out stains and care for fabrics.

Wrinkle Extra Hot Extra High Extra Heavy Steam for Stains* _ This cycle combines low-speed

Control Hot Med Med Fresh Spin TM _ tumbling and medium-speed spin

Warm Low Light Extra Rinse for gentle fabric care and reduced

Cool Delay Start wrinkling.

Cold

Delicates Extra Hot Extra High Extra Heavy Steam for Stains* This cycle combines low-speed

Hot Med Med Fresh Spin TM tumbling and low-speed spin for

Warm Low Light Extra Rinse gentle fabric care and reduced

Cool Delay Start wrinkling.

Cold

Bedding Extra Hot Extra High Extra Heavy Steam for Stains* _ The wash action of this cycle is

Hot Med Med Fresh Spin TM _ designed to keep large items from

Warm Low Light Extra Rinse tangling and bailing up.

Cool Delay Start

Cold

Rapid Wash Extra Hot Extra High Extra Heavy Steam for Stains* _ For small loads (3-4 items) needed

Hot Med Med Fresh Spin TM _ quickly. This cycle combines high-

Warm Low Light Extra Rinse speed tumbling, a shortened wash

Cool Delay Start time, and an extra-high-speed spin

Cold for reduced drying times.

Clean Use this cycle every 30 washes to

Washer keep the inside of your washer fresh

with and clean. This cycle uses a higher

affresh ce water level. Use with affresh cewasher

cleaner tablet or liquid chlorine

bleach to thoroughly clean the inside

of your washer. This cycle should not

be interrupted. See "Washer Care."

IMPORTANT: Do not place garments

or other items in the washer during

the Clean Washer with affresh c_

cycle. Use this cycle with an empty

wash tub. See "Washer Care" in

"Washer Maintenance."

* Steam for Stains option is only available when warm, hot, or extra hot water temperature is selected.

continued on next page

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle,

Small load: Fill the washer drum with 3-4 items, not than

1/4 full,

_ Medium load: Fill the washer drum to about 1/2 full,

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes

can tumble freely. For best results, avoid packing tightly.

CYCLEGUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best

fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES:

III Not all cycles, temperatures, options, or spin speeds are available on all models.

II All wash temperature selections feature a cold rinse.

III Not all temperatures, spin speeds, or soil levels are labeled on the control panel.

r Items to wash

using default Cycle: Wash

cycle settings: Temperature:

Wet load of clothes Drain N/A

&Spin

Swimwear, items that Drain Extra Hot

need rinsing & Spin Hot

with Warm

Extra Rinse Cool

Cold

Clothing, bedding Sanitize t Extra Hot

and towels requiring

sanifizafion

and household items

exposed to possible

allergens

Speed: Level:

Extra High N/A Fresh Spin TM

Med Delay Start

Low

Fresh Spin TM @Delay Start

Extra High

Med

Low

Extra High

Med

Low

Extra Heavy

Med

Light

Available Cycle Details:

I Options:

Extra Heavy Steam for Stains*

Med Fresh Spin TM

Light Extra Rinse

Delay Start

..... =.......

Sturdy garments Allergen tt Extra Hot Extra High Extra Heavy Steam for Stains*

Hot Med Med Fresh Spin TM

Light Extra Rinse

Heavily soiled fabrics

Extra Hot

Hot

Warm

Cool

Cold

Delay Start

Extra High

Med

Low

Extra Heavy

Med

Light

Steam for Stains*

Fresh Spin TM

Extra Rinse

Delay Start

Power

Wash

Use Drain & Spin to remove excess

water from the load. Spin speed can

be set to a lower setting.

Select Drain & Spin; then select

Extra Rinse to add water. The

cycle includes an extra-high-speed

spin. For some fabrics, you may

wish to set the spin speed to a

lower setting.

Using the highest wash temperature

available ensures sanitizafion.

Check recommended wash

temperature of your items.

Uses more water to flush out

allergens such as dust mites

and pet dander from normally-

soiled items.

Use this cycle for extremely soiled

garments and household items that

need additional cleaning power. This

cycle combines high-speed wash

action, extra-high-speed spin, and a

deep rinse to flush excess dirt from

the load.

* Steam for Stains option is only available when warm, hot, or extra hot water temperature is selected.

t- Sanitize

II This washer has a Sanitize Cycle that eliminates 99.90/0 of bacteria typically found on clothing, bedding, and towels, based on independent,

third-party laboratory testing. There is no carryover of bacteria between loads after the cycle is complete.

II Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-hot water temperature to help ensure the removal

of heavy soils and stains. It is recommended that you set your hot water heater to 1 20°F (49°C) to ensure proper performance during this

cycle.

1-1- Allergen

Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this

cycle reduced tested allergens by at least 95.00/0 and maintained the water temperature necessary to kill dust mites. Only the allergen cycle

has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness. It is recommended that

you set your hot water heater to 120°F (49°C) to ensure proper performance during this cycle.

USINGYOURWASHER

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

First wash cycle without laundry

Before washing clothes for the first time, if not completed during

the final installation step, choose the NORMAL cycle and run it

without clothes. Use only HE detergent. Use 1/2 the manufacturer's

recommended amount for a medium-size load. This initial cycle

serves to ensure the interior is clean before washing clothes.

1, Sort and prepare your laundry

Sort items by recommended cycle, water temperature, and

colorfastness. Separate heavily soiled items from lightly soiled.

Separate delicate items from sturdy fabrics. Treat stains promptly

and check for colorfastness by testing stain remover products on

an inside seam.

iMPORTANT:

[] Empty pockets. Loose change, buttons, or any small object can

plug pumps and may require a service call.

[] Close zippers, fasten hooks, tie strings and sashes, and remove

non-washable trim and ornaments.

[] Mend rips and tears to avoid further damage to items during

washing.

[] Turn knits inside out to prevent pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint

from towels, rugs, and chenille fabrics.

[] Do not dry garments if stains remain after washing, because heat

can set stains into fabric.

[] Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage

to your garments.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

F2, Add laundry products (if desired)

Single-dose laundry packet, Oxi-type boosters, color-safe bleach,

or fabric softener crystals can be added to the drum prior to

adding laundry.

NOTE: Do not add clothes to washer drum prior to adding

laundry products. Always follow manufacturer's instructions.

3,Load laundry into washer

Place a load of sorted clothes loosely in the washer, items need to

move freely for best cleaning and to reduce wrinkling and tangling.

Close the washer door by pushing it firmly until the latch clicks.

[] Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close easily.

See "Cycle Guide" for loading suggestions.

[] Mix large and small items and avoid washing single items. Load

evenly.

[] Wash small items in mesh garment bags. For multiple items, use

more than one bag and fill bags equally.

USINGYOURWASHER

USING LAUNDRY PRODUCT DISPENSERS

NOTE: Do not add single-dose laundry packets, Oxi-type boosters,

color-safe bleach, or fabric softener crystals to dispensers, They will

not dispense correctly,

4, Add HE detergent

Adjust the selector, based on type of HE detergent used

(either liquid or powdered). See "Using the Dispenser Drawer"

instructions on how to use the dispenser,

(if desired)

Pour a measured amount of liquid fabric softener into liquid fabric

softener compartment. Always follow manufacturer's directions for

correct amount of fabric softener based on your load size.

Fabric softener is always dispensed in the last rinse, even if Extra

Rinse is selected.

IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup (60

mL) of fabric softener. Do not fill past the MAX line. Overfilling

dispenser will cause fabric softener to immediately dispense into

washer.

[] Do not spill or drip any fabric softener onto the clothes.

[] Do not use liquid fabric softener dispenser balls in this washer.

They will not dispense correctly.

Add liquid chlorine bleach to dispenser

(if desired)

Add liquid chlorine bleach to the bleach compartment. Do not overfill,

dilute, or use more than 2/3 cup (165 mL). Do not use color-safe

bleach or Oxi in the same cycle with liquid chlorine bleach.

[] Always measure liquid chlorine bleach. Use a measuring cup with

a pour spout; do not guess.

[] Do not fill beyond the "MAX" level. Overfilling could cause

garment damage.

7, Touch POWER/CANCEL to turn on

washer (optional)

power/cancel

Slowly close the dispenser drawer. Make sure the drawer is closed

completely, then touch POWER/CANCEL to turn on the washer or

go to Step 8,

8, Select CYCLE*

P_w_WaSh

beddin;

a[[ergen

sanitize

drain

&spin

normal

cold

wash

wrinkle

control

de[icates

rapid

wash

cleanwasher

w_tha_

Turn cycle knob to select your wash cycle. See "Cycle Guide" for

details on cycle features.

9, Adjust settings, if desired*

_1 cold warm

m u i

extra

I I Ught heavy

so([[eve[ u _

extra

I I low high

spin speed g !.

extra

hot

The display will show the default settings for the selected cycle. To

adjust a setting, touch its name - Temperature, Soil Level, or Spin

Speed. Adjusting settings will change the Estimated Cycle Time.

Tightly packing the load, unbalanced loads, or excessive suds may

also cause the washer to increase the cycle time.

1 0. Select any additional options*

steam

for stains

extra

rinse

fresh

spin

cyde

signa_

To add an option to the cycle, touch its name - Steam for Stains,

Extra Rinse, Fresh Spin, or Cycle Signal. To remove an option from

the selected cycle, touch the option again.

I I, Setting a delayed start

estimated cycle time

I _ + ) delaystart

;;i

If you do not want to begin a cycle immediately, you may choose

the DELAY START option. This will delay the start of the wash

cycle by up to 12 hours.

To set a delayed start:

1. Touch DELAY START + and - to set the desired delay time,

2. Touch and hold START to set the delay, The delay countdown

has started when the START light stops blinking,

*Not all options and settings are available with all cycles.

See "Cycle Guide" for available options and settings.

USINGYOURWASHER

1 2, Touch and hold START to begin

wash cycle

hold to start

Touch and hold START to start the wash cycle, To pause

a cycle in progress, touch START once, then touch and

hold again to continue the cycle, To cancel a cycle, touch

POWER/CANCEL,

Once you touch and hold START, you will hear the door lock,

unlock, and lock again, The washer door will remain locked

during the wash cycle,

Unlocking the door to add garments:

ifyou need to open the door to add 1 or 2

missed garments, you may do so while the

"Add a Garment" light is lit,

== add a garment

Touch START once; the door will unlock

once the washer movement has stopped.

This may take several minutes. Then close

door and touch and hold START again to

restart the cycle.

hold to start

13, Remove garments promptly

after cycle is finished

between the tub and the washer drum.

if you will be unable to remove the load promptly, [ ,, fres_-----_

use the Fresh Spin" option. If selected, the Fresh [ I - spin I

Spin TM option will tumble the load periodically for

up to 6 hours. To turn off the Fresh Spin TM option,

touch POWER/CANCEL. To set the washer so that the Fresh Spin TM

option does not come on for future cycles, touch Fresh Spin.

NOTE:

[] The door will remain locked while the Fresh Spin TM option is

active. To cancel the option and unlock the door, touch POWER/

CANCEL.

[] A small amount of water may remain in the dispensers after the

wash cycle is complete. This is normal.

[] This washer has a tight seal to avoid water leaks. To avoid odors,

leave the door open to allow the washer to dry between uses.

WASHERMAINTENANCE

WATER iNLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of

hose failure, Periodically inspect and replace inlet hoses if

bulges, kinks, cuts, wear, or leaks are found,

When replacing your inlet hoses, mark the date of replacement

on the label with a permanent marker,

WASHER CARE

Recommendations to Help Keep Your Washer Clean

and Performing at its Best

1. Always use High Efficiency (HE) detergents and follow the

HE detergent manufacturer's instructions regarding the

amount of HE detergent to use, Never use more than the

recommended amount because that may increase the rate

at which detergent and soil residue accumulate inside your

washer, which in turn may result in undesirable odor,

2. Use warm or hot water washes sometimes (not exclusively

cold water washes), because they do a better job of controlling

the rate at which soils and detergent accumulate,

3. Always leave the washer door slightly ajar between uses

to help dry out the washer and prevent the buildup of

odor-causing residue,

Cleaning Your Front Loading Washer

Read these instructions completely before beginning the

routine cleaning processes recommended below, This Washer

Maintenance Procedure should be performed, at a minimum,

once per month or every 30 wash cycles, whichever occurs

sooner, to control the rate at which soils and detergent may

otherwise accumulate in your washer,

Cleaning the Door Seal

1. Open the washer door and remove any clothing or items from

the washer,

2. inspect the colored seal between the door opening and the

drum for stained areas or soil buildup, Pull back the seal

to inspect all areas under the seal and to check for foreign

objects,

3. if stained areas or soil buildup are found, wipe down these

areas of the seal using either of the following two procedures:

a. affresh :_Grit Grabber TM Cloth Procedure:

i, When the cycle is complete, gently pull back the rubber

door seal and clean the entire surface with the rough

side of the Grit Grabber TM cloth,

b. Dilute Liquid Chlorine Bleach Procedure:

i, Mix a dilute bleach solution, using 3/4 cup (177 mL) of

liquid chlorine bleach and 1 gallon (3,8 L) of warm tap

water,

ii, Wipe the seal area with the dilute solution, using

a damp cloth,

iii, Let stand 5 minutes,

iv, Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open,

iMPORTANT:

[] Wear rubber gloves when cleaning with bleach,

[] Refer to the bleach manufacturer's instructions for

proper use,

ff "_

WASHER CARE (cont.)

Cleaning the Inside of the Washer

This washer has a special cycle that uses higher water volumes

in combination with affresh '_";Washer Cleaner or liquid chlorine

bleach to thoroughly clean the inside of the washer, Steam

washer models also utilize steam to enhance cleaning in this

special cycle,

NOTE: Read these instructions completely before beginning the

cleaning process,

Begin procedure

1. affresh :_Washer Cleaner Cycle Procedure

(Recommended for Best Performance):

a. Open the washer door and remove any clothing or items,

b. Add an affresh '_";Washer Cleaner tablet to the washer

drum,

c. Do not add the affresh "- Washer Cleaner tablet to the

dispenser drawer,

d. Do not add any detergent or other chemical to the washer

when following this procedure,

e. Close the washer door,

f. Select the CLEAN WASHER cycle,

g. Touch and hold START to begin the cycle, The Clean

Washer Cycle Operation is described below,

2. Chlorine Bleach Procedure:

a. Open the washer door and remove any clothing or items,

b. Open the dispenser drawer and add liquid chlorine bleach

to the MAX level in both the bleach compartment and the

fabric softener compartment,

NOTE: Use of more liquid chlorine bleach than is

recommended above could cause washer damage over time,

c. Close the washer door and the dispenser drawer,

d. Do not add any detergent or other chemicals to the

washer when following this procedure,

e. Close the washer door,

f. Select the CLEAN WASHER cycle,

g. Touch and hold START to begin the cycle, The Clean

Washer Cycle Operation is described below,

NOTE: For best results, do not interrupt cycle,

Description of Clean Washer Cycle Operation:

1. The Clean Washer cycle will determine whether clothing

or other items are in the washer,

2. if no items are detected in the washer, it will proceed with

the cycle,

a. if any items are detected in the washer, "rU' (remove load)

will be displayed, The door will unlock, Open washer and

remove any garments from the washer drum,

b. Touch POWER/CANCEL to clear the "rU' code,

c. Touch and hold START to restart the cycle,

After the cycle is complete, leave the door open slightly to allow

for better ventilation and drying of the washer interior,

WASHERMAINTENANCE

WASHER CARE (cont.)

Cancellation of Clean Washer Cycle Operation:

if the Clean Washer cycle is canceled by the user after it has

been initiated, it may take up to 30 minutes for the washer

to purge any affresh <*;Cleaner, chlorine bleach, or other

chemistry from the wash system and to adequately rinse any

remaining chemistry, The washer door will remain locked until

the cancellation process has been completed, This ensures no

cleaning chemistry will be carried over to the next wash cycle

and reduces the potential for damage to subsequent loads of

laundry or to the washer itself,

Clean Washer Cycle Cancellation Procedure:

1. Touch POWER/CANCEL on the washer once,

2. The washer will begin to drain and rinse away the remaining

cleaning chemistry,

3. The cycle will complete the cancellation process in

approximately 30 minutes or less,

4. The washer then can be used to either repeat the Clean

Washer cycle or to wash laundry using one of the regular

wash cycles selected by the user,

Cleaning the Dispensers

After a period of using your washer, you may find some residue

buildup in the washer's dispensers, To remove residue from the

dispensers, remove the drawer and wipe the surfaces with a

damp cloth and towel dry either before or after you run the Clean

Washer cycle, Use an all-purpose surface cleaner, if needed,

IMPORTANT: Dispenser is not dishwasher safe,

Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe up any spills,

Occasionally wipe the outside of your washer to help keep it

looking new, Use mild soap and water,

iMPORTANT: To avoid damaging the washer's finish, do not use

abrasive products,

CLEAN WASHER CYCLE REMINDER

The Clean Washer LED will flash _"'_-_/JJ

at the end of a wash cycle when "_ "_'_e_n washer

the washer has run 30 wash ,,_h_,_

cycles. This is a reminder to run

the Clean Washer cycle,

if the Clean Washer cycle is not turned on, the LED will stop

flashing at the end of a wash cycle after running 3 more regular

wash cycles, After 30 more wash cycles are completed, the

Clean Washer LED will again flash at the end of a wash cycle as

a reminder,

tf "_

REMOVING THE DISPENSER

To remove:

1. Pull dispenser drawer out until it stops,

2. Press down on the release tab and pull straight out to

remove the dispenser,

3. Lift off cover panel by

pulling straight up,

To replace:

1. Slide cover panel back

onto posts on dispenser,

2. Align edges of dispenser

with guides in washer,

then slide dispenser

back into slot,

NON-USE AND VACATION CARE

Operate your washer only when you are home, If moving, or

not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer,

2. Turn off water supply to washer to avoid flooding due

to water pressure surges,

3. Clean dispensers, See "Cleaning the Dispensers,"

" WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze, Because some water may stay in

hoses, freezing can damage washer, If storing or moving

during freezing weather, winterize your washer,

To winterize washer:

1. Shut off both water faucets, disconnect and drain water

inlet hoses,

2. Put 1 qt, (1 L) of R.V,-type antifreeze in washer drum

and run washer on NORMAL cycle for about 2 minutes to

mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

WINTER STORAGE CARE directions before moving.

3. Disconnect drain hose from drain system and from back

of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer drum.

6. Bundle power cord with a rubber band or cable tie to keep

it from hanging onto the ground.

IMPORTANT: Call for service to install new transport bolts.

Do not reuse transport bolts. Washer must be transported

in the upright position. To avoid structural damage to your

washer, it must be properly set up for relocation by a certified

technician.

f REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1. Refer to Installation Instructions to locate, level, and

connect washer.

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run washer through NORMAL cycle to clean washer and

remove antifreeze, if used. Use only HE detergent. Use half

the manufacturer's recommended amount for a medium-size

load.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_heIp -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

If you experience Possible Causes Solution

Once any possible issues are corrected, touch POWER/CANCEL once to clear the code. Reselect and restart the cycle.

"Sud" (Excess suds) Excessive suds in washer. Washer is

appears in display running a suds reduction routine.

Fn8 followed by En/

(water supply error)

appears in display

Fn9 followed by En/

(drain pump system

error) appears in display

Check for proper water supply.

Check plumbing for correct drain

hose installation. Drain hose extends into

standpipe farther than 41/2'' (114 mm).

Allow the washer to continue. Use only HE detergent.

Always measure detergent, and base detergent quantity on

load size. Follow detergent manufacturer's instructions.

Both hoses must be attached and have water flowing to the inlet

valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

Touch POWER/CANCEL once to clear the code. Then touch

POWER/CANCEL again to restart washer. If code appears again,

call for service.

Not using HE detergent or using too

much HE detergent.

Fn5 followed by En2 Washer door not locking. Touch POWER/CANCEL to cancel the cycle. Make sure the door

(door will not lock) is closed completely and latching. Check for items in the washer

appears in display drum that may be keeping the door from closing completely.

F_ followed by En/ Motor is having difficulty turning Washer is tightly packed. Remove some items. See "Cycle

(motor drive error) the drum. Guide" for load size recommendations. Make sure that all shipping

appears in display materials have been removed. See the Installation Instructions.

"rE" (remove load) Load detected in drum during Clean Remove items from washer drum and restart Clean Washer with

appears in display Washer with affresh ® cycle, affresh ® cycle.

Washer making error Door has not been opened and closed This code may appear when the washer is first turned on.

beeps for at least 3 cycles. Open and close the door to clear the display.

Washer beeps when Door not closed. Close the door completely.

START is touched

F## E## code other System error code. Touch POWER/CANCEL once to clear the code. Then touch

than as described above POWER/CANCEL again to restart washer. If code appears again,

appears in display call for service.

"lnt" (interrupted) The cycle was paused or cancelled. The washer can take 20 to 30 minutes to stop spinning and drain

appears in display and will display this error code during that time. Touch POWER/

CANCEL once to clear the code. Then touch POWER/CANCEL

again to restart washer.

Clean Washer LED

flashing at end of wash

cycle

The washer has run 30 wash cycles and

is indicating a reminder to run the Clean

Washer cycle.

Check drain hose for proper installation.

Make sure the drain hose is not kinked, pinched, or blocked.

Remove any clogs from drain hose,

Use drain hose form and securely attach to drainpipe or tub,

Lower drain hose if the end is higher than 96" (2,4 m) above

the floor.

Use only HE detergent, Always measure detergent and follow

manufacturer's directions based on load size and soil level,

Run the Clean Washer cycle. If the Clean Washer cycle is not

turned on, the LED will stop flashing at the end of a wash cycle

after running 3 more regular wash cycles. After 30 more wash

cycles are completed, the Clean Washer LED will again flash

at the end of a wash cycle as a reminder.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

Vibration, rocking, or

"walking"

Feet may not be in contact with the Front and rear feet must be in firm contact with floor, and washer

floor and locked, must be level to operate properly. Jam nuts must be tight against

the bottom of the cabinet.

Washer may not be level. Check floor for flexing or sagging. If flooring is uneven, a 3/4"

(19 mm) piece of plywood under your washer will reduce sound.

See "Level the Washer" in Instaalation Instructions.

Load could be unbalanced or too large. Avoid tightly packing the load. Avoid washing single items. Balance

a single item such as a rug or jeans jacket with a few extra items.

Item or load not suitable for selected cycle. See "Cycle Guide" and

"Using Your Washer."

The shipping bolts are still in the back See "Remove transport bolts from washer" in the Installation

of the washer. Instructions.

Clicking or metallic noises Door locking or unlocking.

Objects caught in washer drain system.

Gurgling or humming

Rolling or sloshing

and occasional clicking

(on low-speed spin)

Check the following for

proper instaalation

Water or suds leaking from

door or rear of cabinet

Load not completely

covered in water

Washer may be draining water.

Steel bails in the balancing system are

balancing the load.

Fill hoses not attached tightly.

Fill hose washers.

Drain hose connection.

Check household plumbing for leaks or

clogged sink or drain.

Not using HE detergent or using too

much HE detergent.

The door will lock, unlock, and lock again. You will hear 3 clicks

after touching and holding START. This is normal.

Empty pockets before washing. Loose items such as coins could

fall between washer drum and tub or may block pump. It may be

necessary to call for service to remove items.

It is normal to hear metal items on clothing such as metal snaps,

buckles, or zippers touch against the stainless steel drum.

The pump may make a humming sound with periodic gurgling or

surging as final amounts of water are removed during the spin/drain

cycles. This is normal at certain stages of the cycle.

This is normal at certain stages of the cycle.

Tighten fill-hose connection.

Properly seat all four fill-hose fiat washers.

Check that the drain hose is properly secured to drainpipe or

laundry tub.

Water can back up out of a clogged sink or drainpipe. Check

all household plumbing for leaks (laundry tubs, drain pipe, water

pipes, and faucets.)

Only use HE detergent. Suds from regular detergents can

cause leaking from the door or rear of cabinet. Always measure

detergent and follow manufacturer's directions based on your load

requirements.

Residue on door glass. Periodically clean the underside of the glass window to avoid

potential leaks.

Door opened during "Add a Garment." Water can drip off the inside of the door when the door is opened

after the start of a cycle.

Water level not visible on door or This is normal for an HE front load washer. The washer senses load

does not cover clothes, sizes and adds the correct amount of water for optimal cleaning.

TROUBLESHOOTING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

in Canada www.maytag.ca for assistance and to possibly avoid a service call.

If you experience Possible Causes Solution

Washer won't run or fill,

washer stops working

Check for proper water supply.

Check proper electrical supply.

Normal washer operation.

The washer door is not firmly shut.

Washer not loaded as recommended.

Both hoses must be attached and have water flowing to

inlet valve.

Both hot and cold water faucets must be turned on.

Check that inlet valve screens have not become clogged.

Check for any kinks in inlet hoses, which can restrict water flow.

Plug power cord into a grounded 3-prong outlet.

Do not use an extension cord.

Ensure there is power to outlet.

Check electrical source or call an electrician to check if voltage

is low.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: if problems continue, contact an electrician.

Door must be completely closed and latched for washer to run.

Washer will pause during certain phases of cycle. Do not interrupt

cycle.

The washer pauses for about 2 minutes during certain cycles.

Allow the cycle to continue. Some cycles feature periods of

tumbling and soak.

Washer may be stopped to reduce suds.

Cold Wash uses less water in the beginning of the cycle to

provide a high concentration of detergent for optimal cleaning

action. Following this concentrated tumbling, more water is used

to complete the wash.

The door must be closed during operation.

Remove several items, rearrange load evenly in washer drum.

Close door and touch and hold START.

Do not add more than 1 or 2 additional items after cycle has started

to avoid tightly packing or unbalancing.

Do not add more water to the washer.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

Washer won't run or fill,

washer stops working

(cont.)

Not using HE detergent or using too

much HE detergent.

Only use HE detergent. Suds from regular detergents can

slow or stop the washer. Always measure detergent, following

manufacturer's directions based on your load requirements.

To remove suds, cancel cycle. Select DRAIN & SPIN with Extra

Rinse. Touch and hold START. Do not add more detergent.

Door not opened between cycles. After 3 wash cycles in a row are completed, the door must be

opened and then closed before a new cycle can begin.

Washer not draining/ Drain hose extends into standpipe Check drain hose for proper installation. Use drain hose form

spinning, loads are farther than 4.5" (114 mm). and securely attach to drainpipe or tub. Do not tape over drain

still wet opening.

The drain hose is clogged, or the Lower drain hose if the end is higher than 96" (2.4 m) above

end of the drain hose more than the floor. Remove any clogs from drain hose. See "Installation

96" (2.4 m) above the floor. Requirements" in Installation Instructions.

The drain hose fits too tightly The drain hose should be loose yet fit securely. Do not seal the

in the standpipe, or it is taped drain hose with tape. The hose needs an air gap. See "Secure the

to the standpipe. Drain Hose" in Installation Instructions.

Using cycles with a lower spin speed. Cycles with lower spin speeds remove less water than cycles

with high spin speeds. Use the recommended cycle/speed spin

for your garment.

Washer not loaded as recommended.

The load may be out of balance.

Not using HE detergent or using too

much HE detergent.

Small items may have been caught in

the pump or stuck between the washer

drum and the outer tub.

Door locked at end of Water remaining in washer after cycle. Select DRAIN & SPIN to remove any water remaining in the

wash cycle washer. The washer door will unlock at the end of the drain.

Fresh Spin TM option is on. While this option is on, the load is tumbled periodically for up to

6 hours. The door remains locked during this time. To unlock the

door, cancel the option by touching POWER/CANCEL

Door locks when cycle has started, if the "Add a Garment" light is lit, touch START once. The door will

unlock.

Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.

Door will not unlock

Incorrect or wrong wash

or rinse temperatures

A tightly packed or unbalanced load may not allow the washer to

spin correctly, leaving the load wetter than normal. See "Cycle

Guide" for load size recommendation for each cycle.

Avoid washing single items. Balance a single item such as a rug or

jeans jacket with a few extra items.

Use only HE detergent. Suds from regular detergent or using

too much detergent can slow or stop draining or spinning. Always

measure and follow manufacturer's directions for your load. To

remove extra suds, select DRAIN & SPiN with Extra Rinse. Do not

add detergent.

Check the drum for any items sticking through the drum holes.

Empty pockets and use garment bags when washing small items.

Washing many loads.

Both hoses must be attached to both washer and faucet, and have

both hot and cold water flowing to inlet vaave.

Check that inlet vaave screens are not clogged.

Remove any kinks in hoses.

Your hot water tank may not have enough hot water to keep up

with the number of hot or warm washes. This is normal.

TROUBLESHOOTING

if you experience

Desired setting or

option does not light

Load not rinsed

Load is wrinkled,

twisted, or tangled

Not cleaning or

removing stains

First try the solutions suggested here or visit our website at www, maytag,com/product_help -

In Canada www, maytag,ca for assistance and to possibly avoid a service call.

Possible Causes Solution

For best performance, not all settings

are available with each cycle, and some

options cannot be used together.

Check for proper water supply.

Not using HE detergent or using too

much HE detergent.

Washer not loaded as recommended.

The load may be out of balance.

Washer not loaded as recommended.

See the "Cycle Guide" for the available settings and options for

each cycle.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water flowing to the inlet

valve.

Both hot and cold water faucets must be on,

inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

The suds from regular detergent can cause the washer

to operate incorrectly.

Use only HE detergent. Always measure detergent and follow

manufacturer's directions based on load size and soil level.

Avoid tightly packing the washer. The washer will not rinse well

if tightly packed. Load with dry items only. See the "Cycle Guide" for

load size recommendations for each cycle.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 garments after washer has started.

When load unbalance occurs, a washing process will start to

redistribute the load. This may lengthen the cycle time. Avoid

washing single items. Balance a single item such as a rug or jeans

jacket with a few extra items.

Add load loosely, items need to move freely reduce wrinkling and

tangling. See the "Cycle Guide" for load size recommendations

for each cycle.

Reduce tangling by mixing types of load items. Use the

recommended cycle for the type of garments being washed.

Wash action and/or spin speed too Select a lower spin speed. Note that items will be wetter than

high for load. when using a higher speed spin.

The washer is not unloaded promptly. Unload the washer as soon as it stops or use Fresh Spin TM option

if you will not be able to unload the washer at the end of the

cycle.

Not choosing the right cycle for the load Use the Delicates cycle or another cycle with a low spin speed

being washed, to reduce wrinkling.

The wash water was not warm enough if safe for load, use warm or hot wash water.

to relax wrinkles.

Washer not loaded as recommended.

Add load loosely. Items need to move freely for best cleaning. See

the "Cycle Guide" for load size recommendations for each cycle.

Add only 1 or 2 garments after washer has started.

Not using HE detergent or using too Use only HE detergent. Always measure detergent and follow

much HE detergent, manufacturer's directions based on load size and soil level.

Hard water or high level of iron (rust) You may need to install a water softener and/or iron filter.

in water.

Fabric softener dispensing ball used. Dispensing balls will not operate correctly with this washer.

Add liquid fabric softener to the fabric softener compartment.

Powdered detergent used for Consider using liquid detergent.

low-speed cycle.

La page charge ...

Maytag MHW4200BG0 Le manuel du propriétaire

Marque: Maytag

Modèle: MHW4200BG0

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MHW4200BG0 Owner's manual

Documents connexes

Autres documents

Chore-Time MF2500A Poultry Winch Wall Control Mode d'emploi