LG WM3455HW Le manuel du propriétaire

P/No.: MFL63288611

WM3455H*

Model/Modelo/Modèle

Designed specially to use only

HE (High-Efﬁciency) detergent

Diseñada especíﬁcamente para usar con

el detergente tipo HE (Alta eﬁciencia)

Spécialement conçu pour

utilisation avec un détergent haute ef-

ﬁcacité uniquement

To contact LG Electronics, 24 hours a day,

7 days a week:

1-800-243-0000

Or visit us on the Web at: us.lge.com

Número telefónico de LG Electronics, las 24

horas del día, 7 días a la semana:

1-800-243-0000

O visítenos en la Web en: us.lge.com

To contact LG Electronics, 24 hours a day,

7 days a week:

1-888-LGCANADA

Or visit us on the Web at: ca.lge.com

Pour contacter LG Electronics, 24 heures par

jour, 7 jours par semaine :

1-888-LGCANADA

Ou visitez notre site Web à l’adresse : ca.lge.com

Before beginning installation, read these instructions

carefully. This wll simplify installation and ensure that the

washer is installed correctly and safely. Leave these instructions

near the washer after installation for future reference.

USER’S GUIDE &

INSTALLATION INSTRUCTIONS

Front Loading Combo

Antes de comenzar la instalación, lea atentamente estas

instrucciones. Esto simpliﬁcará la instalación y asegurará que

la lavadora está instalada en forma correcta y segura. Conserve

estas instrucciones cerca de la lavadora luego de la instalación

para futuras consultas.

GUÍA DEL USUARIO E

INSTRUCCIONES DE INSTALACIÓN

Lavadora de Carga

Frontal

Avant de commencer à installer votre machine à laver, lisez at-

tentivement ces instructions. Cela simpliﬁera votre installation

et assurera que la machine à laver est installée correctement et

en toute sécurité. Conservez ces instructions à proximité de la

machine à laver après son installation, pour référence future.

GUIDE DE L’UTILISATEUR ET

DIRECTIVES D’INSTALLATION

Lave-linge et

chargement frontal

Congratulations on your purchase

and welcome to the LG family.

Your new LG washing machine

combines the most advanced

washing technology with simple

operation and high efficiency.

Follow the operating and care in-

structions in this manual and your

washer will provide many years of

reliable service.

THANK YOU!

I N T RO D U C T I O N

INSTALLATION INSTRUCTIONS

Choose the Proper Location .................................. 8

Clearances ............................................................. 8

Flooring .................................................................. 9

Unpacking ............................................................ 10

Connecting the Water Lines ................................. 11

Connecting the Drain Line .................................... 12

Leveling the Washer ............................................. 13

Installation of non-skid pads (optional) ................ 13

HOW TO USE

Sorting Wash Loads ............................................. 14

Selecting Detergent .............................................. 15

About the Dispenser ............................................. 15

Loading the Dispenser ......................................... 16

Control Panel Features ......................................... 17

Cycle Guide .......................................................... 18

The LED Display ................................................... 19

Operating the Washer .......................................... 20

Cycle Setting Buttons .......................................... 21

Cycle Option Buttons .......................................... 22

Special Functions ................................................. 23

PARTS AND FEATURES

Special Features ..................................................... 7

TROUBLESHOOTING

Normal Sounds You May Hear ............................. 28

Before Calling for Service ............................... 28-30

CARE AND CLEANING

Regular Cleaning ............................................ 24-25

Cleaning the Washer ............................................ 25

Maintenance ................................................... 26–27

WARRANTY ..............................................32-33

SPECIFICATION

IMPORTANT SAFETY INSTRUCTIONS

Basic Safety Precautions .................................. 3-6

Key Dimensions and Speciﬁ cations ..................... 31

Product Registration Information

Model:

Serial Number:

Date of Purchase:

The model and serial number can be located on

the rating plate on the front of the washer.

Staple your receipt here.

2

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

wDANGER: You can be killed or seriously injured if you don’t follow instructions immediately.

wWARNING: You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

3

READ ALL INSTRUCTIONS BEFORE USE

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other ﬂ ammable

or explosive substances, as they give off vapors that

could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other

ﬂ ammable or explosive substances to the wash

water. These substances give off vapors that could

ignite or explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washer,

turn on all hot water faucets and let the water ﬂ ow

from each for several minutes. This will release any

accumulated hydrogen gas. As the gas is ﬂ ammable,

do not smoke or use an open ﬂ ame during this time.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children.

• Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

• Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service be

performed by a qualiﬁ ed individual.

• See Installation Instructions for grounding

requirements.

• ALWAYS follow the fabric care instructions

supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch ﬁ re.

• Use fabric softeners or products to eliminate static

only as recommended by the manufacturer.

• This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

• Turn off the water taps and unplug the washer if the

machine is to be left for an extended period of time,

such as during vacations.

• Packaging material can be dangerous for children.

There is a risk of suffocation! Keep all packaging

from children.

• Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

wWARNING: To reduce the risk of fire, electric shock, or personal injury when using this

appliance, follow basic precautions, including the following.

BASIC SAFETY PRECAUTIONS

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁ re or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of least resistance for electric current. This appliance is

equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must

be plugged into an appropriate outlet that is properly installed and grounded in accordance with all

local codes and ordinances.

GROUNDING INSTRUCTIONS

wWARNING: Improper connection of the equipment-grounding conductor can result in risk

of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the

outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause

serious injury, fire, electrical shock, or death.

4

• Refer to INSTALLATION INSTRUCTIONS for

detailed grounding procedures. Installation

instructions are packed in the washer for installer

’

s

reference. If the washer is moved to a new location,

have it checked and reinstalled by a qualiﬁed service

person. Failure to follow this warning can cause

serious injury, ﬁre, electrical shock, or death.

• Do not, under any circumstances cut or remove

the third (ground) prong from the power cord.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• For personal safety, this appliance must be

properly grounded. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock,

or death.

• The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall outlet to

minimize the possibillty of electric shock hazard from

this appliance.

• This washer must be plugged into a 120 VAC,

60 Hz grounded outlet. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock, or

death.

• Have the wall outlet and circuit checked by a

qualiﬁed electrician to make sure the outlet is

properly grounded. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock,

or death.

• Where a standard 2-prong wall outlet is

encountered, it is your personal responsibility

and obligation to have it replaced with a properly

grounded 3-prong wall outlet. Failure to follow

this warning can cause serious injury, ﬁre, electrical

shock, or death.

• Do not install on carpet. Install washer on a solid

ﬂoor. Failure to follow this warning can cause serious

leak damage.

• Do not remove ground prong. Do not use an

adapter or extension cord. Plug into a grounded

3-prong outlet. Failure to follow these warnings can

cause serious injury, ﬁre, electrical shock, or death.

• The washer should always be plugged into its

own individual electrical outlet which has a

voltage rating that matches the rating plate. This

provides the best performance and also prevents

overloading house wiring circuits which could cause

a ﬁre hazard from overheated wires.

• Never unplug your washer by pulling on the

power cord. Always grip plug ﬁrmly and pull straight

out from the outlet. Failure to follow this warning can

cause serious injury, ﬁre, electrical shock, or death.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end. Failure

to follow this warning can cause serious injury, ﬁre,

electrical shock, or death.

• When installing or moving the washer, be careful

not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• The washer must be installed and electrically

grounded by a qualiﬁed service person in

accordance with local codes to prevent shock

hazard and assure stability during operation.

• Washer is heavy. Two or more people may be

need to install and move the appliance. Failure to

do so can result in back or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

• Do not install the washer in humid spaces to

reduce the risk of electric shock. Failure to follow

this warning can cause serious injury, ﬁre, electrical

shock, or death.

• To reduce the risk of personal injury, adhere to

all industry recommended safety procedures

including the use of long sleeved gloves and

safety glasses. Failure to follow all of the safety

warnings in this manual could result in property

damage, personal injury or death.

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

SAFETY INSTRUCTIONS FOR INSTALLATION

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

5

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

SAFETY INSTRUCTIONS FOR USE, CARE AND CLEANING, AND DISPOSAL

•

Unplug the washer before cleaning to avoid the

risk of electric shock.

•

Never use harsh chemicals, abrasive cleaners,

or solvents to clean the washer. They will

damage the ﬁ nish.

•

Do not put oily or greasy rags or clothing on

top of the washer. These substances give off

vapors that could ignite the materials.

•

Do not wash items that are soiled with

vegetable or cooking oil. These items may

contain some oil after laundering. Due to the

remaining oil, the fabric may smoke or catch

ﬁ re by itself.

•

Disconnect this appliance from the

power supply before attempting any user

maintenance. Turning the controls to the OFF

position does not disconnect this appliance

from the power supply. Failure to follow this

warning can cause serious injury, ﬁ re, electrical

shock, or death.

•

Do not combine laundry products for use in

one load unless speciﬁ ed on the label.

•

Do not mix chlorine bleach with ammonia

or acids such as vinegar. Follow package

directions when using laundry products.

Incorrect usage can produce poisonous gas,

resulting in serious injury or death.

•

Do not reach into the washer while parts are

moving. Before loading, unloading, or adding

items, press the START/PAUSE button and

allow the drum to coast to a complete stop

before reaching inside. Failure to follow this

warning can cause serious injury, ﬁ re, electrical

shock, or death.

•

Do not allow children to play on or in the

washer. Close supervision of children is

necessary when the washer is used near

children. As children grow, teach them the

proper, safe use of all appliances. Failure to

comply with these warnings could result in serious

personal injuries.

•

Destroy the carton, plastic bag and other

packing materials after the washer is

unpacked. Children might use them for play.

Cartons covered with rugs, bedspreads, or

plastic sheets can become airtight chambers.

Failure to comply with these warnings could result

in serious personal injuries or death.

•

Keep laundry products out of children’s reach.

To prevent personal injury, observe all warnings

on product labels. Failure to comply with these

warnings could result in serious personal injuries.

•

Remove the door to the washing compartment

to avoid the danger of children or small animals

getting trapped inside before your washer is

removed from service or discarded. Failure

to do so can result in serious personal injury

or death.

wWARNING: To reduce the risk of fire, electric shock, or personal injury when using this

appliance, follow basic precautions, including the following.

6

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁ re or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

PA RT S A N D F E AT U R E S

3

2

1

4

5

DETERGENT DISPENSER DRAWER

This three-compartment drawer provides separate

dispensers for prewash and main wash detergent,

and liquid fabric softener.

CONTROL PANEL WITH LED DISPLAY

Simple electronic controls are user-friendly.

The LED display indicates cycle options and

cycle time during operation.

LARGE-CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers

extreme durability and is tilted to improve

efficiency and allow easier access for large items.

NOTE: No matter how large the article, there

must still be room for the clothes to tumble.

DIRECT-DRIVE MOTOR

Direct-drive motor eliminates the belt and pulleys

found on most washers to provide improved

performance and reliability while increasing

energy efficiency.

DRAIN ACCESS PANEL

Provides access to the drain line and drain

pump filter.

EASY-ACCESS DOOR

Extra-large door locks during operation and

features a delay to prevent the door from being

opened until the washer interior has cooled and

the water level has lowered.

LEVELING FEET

Four leveling feet (two in the front and two in

the back) adjust to improve washer stability on

uneven floors.

7

Rear of Washer

6

Included Accessories

Hot and Cold

Water Hoses

Wrench

(for removing shipping

bolts and adjusting

leveling feet)

Tie Strap

(for securing

drain hose)

Elbow Bracket

(for securing drain

hose)

Non-skid pads

Caps (4)

(for covering

shipping bolt holes)

7

SPECIAL FEATURES

6

1

2

4

3

5

7

I N S TA L L AT I O N I N S T RUCTIONS

CHOOSE THE PROPER LOCATION

CLEARANCES

Allow at least 19.8 in. (50.3 cm) in front of the

washer to open the door.

To ensure sufficient clearance for water lines and

airflow, allow minimum clearances of at least

1 in. (2.5 cm) at the sides and 4 in. (10 cm)

behind the unit. Be sure to allow for wall, door,

or floor moldings that may increase the required

clearances.

• Do not remove ground prong. Do not use

an adapter or extension cord. Plug into a

grounded 3-prong outlet. Failure to follow this

warning can cause serious injury, ﬁ re, electrical

shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of

either side of the washer.

• The appliance and outlet must be positioned so

that the plug is easily accessible.

• Do not overload the outlet with more than one

appliance.

• The outlet must be grounded in accordance with

current wiring codes and regulations.

• Time-delay fuse or circuit breaker is

recommended.

NOTE: It is the personal responsibility and

obligation of the product owner to have a

proper outlet installed by a qualified electrician.

wWARNING

• Washer is heavy! Two or more people

are required when moving and unpacking

the washer. Failure to do so can result in back

or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing

or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious

injury, ﬁ re, electrical shock, or death.

• Properly ground washer to conform with all

governing codes and ordinances. Failure to

follow this warning can cause serious injury, ﬁ re,

electrical shock, or death.

• To reduce the risk of electric shock, do not

install the washer in humid spaces. Failure to

follow this warning can cause serious injury, ﬁ re,

electrical shock, or death.

8

21.6" (54.86 cm)

25.2" (64 cm)

45" (114.3 cm)

33.5" (85.09 cm)

3.5" (8.89 cm)

24" (60.96 cm) 1" (2.5 cm)1" (2.5 cm)

I N S TA L L AT I O N I N S T RUCTIONS

FLOORING

NOTE: Please note that the floor must be strong

and rigid enough to support the weight of the

washer when fully loaded, without flexing or

bouncing. If your floor has too much flex in it,

you may need to reinforce it to make it more

rigid. A floor that is adequate for a top-loading

washer may not be rigid enough for a front-

loading washer due to the difference in the spin

speed and direction. If the floor is not solid, your

washer may vibrate and you may hear and feel

the vibration throughout your house.

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed ﬂoor.

See the NOTE at right.

• Allowable slope under the entire washer is

1° maximum.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the washer on a platform or weakly

supported structure. Use only an approved

accessory pedestal as described below.

NOTE: Before installing the

washer, make sure the floor is

clean, dry and free of dust, dirt,

water and oils so the washer feet

can not slide easily. Leveling

feet that can move or slide on the floor can

contribute to excess vibration and noise due to

poor contact with the floor.

A

B

9

I N S TA L L AT I O N I N S T RUCTIONS

If you must lay the washer down to remove the

base packaging materials, always lay it carefully

on its side. Do NOT lay the washer on its front

or back.

IMPORTANT: To prevent internal damage

during transport, the washer is equipped with

4 shipping bolts and plastic retainers. These

bolts and retainers MUST be removed before

operating the washer.

• Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which can

lead to permanent damage to the washer. The

cord is secured to the back of the washer with

a shipping bolt to help prevent operation with

shipping bolts in place.

Remove the retainers by turning them slightly

while pulling. Rotate and press the hole caps

into the shipping bolt holes.

Starting with the bottom 2 shipping bolts,

use the included wrench to remove the

4 shipping bolts by turning them

counterclockwise.

1

2

NOTE: Save the bolts and retainers for

future use. To prevent damage to internal

components, the shipping bolts and

retainers must be installed when

transporting the washer.

Cap

Carton Base

UNPACKING

10

I N S TA L L AT I O N I N S T RUCTIONS

CONNECTING THE WATER LINES

Insert a rubber seal into the threaded

ﬁttings on each hose.

1

Rubber Seal

Water Hose

(to tap)

Rubber Seal

Water Hose

(to water inlet

on washer)

3

Attach the hot water line to the hot water

tap. Attach the cold water line to the cold

water tap.

Tighten the ﬁttings securely. Open the water

taps fully to check for leaks.

Water Tap

NOTE: Do not cross-thread the hose ﬁttings.

Attach the hot water line to the red hot water

inlet on the back of the washer. Attach the

cold water line to the blue cold water inlet on

the back of the washer. Tighten the fittings

securely.

2

• IMPORTANT: Use new hoses when installing

the washer. Do NOT reuse old hoses.

• IMPORTANT: Use ONLY the inlet hoses

provided by LG with this laundry product.

Aftermarket hoses are not guaranteed to ﬁt or

function correctly. Other hoses may not tighten

correctly and could cause leaks. Subsequent

damage to product or property will not be

covered under the terms of LG's warranty.

• Water supply pressure must be between 14.5

PSI and 116 PSI (100~800 kPa). If the water

supply pressure is more than 116 PSI,

a pressure reducing valve must be installed.

• Periodically check the hose for cracks, leaks,

and wear, and replace the hose if necessary.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

• The washer should never be installed or stored

in a location subject to freezing temperatures.

Damage to the water lines and internal

mechanisms of the washer can result. If the

washer was exposed to freezing temperatures

prior to installation, allow it to stand at room

temperature for several hours before use.

11

Cold Hot(option)

Hot water tap

Cold

water

tap

I N S TA L L AT I O N I N S T RUCTIONS

CONNECTING THE DRAIN LINE

Stand

Pipe

Tie Strap

Clip the end of the hose into the elbow bracket.

Insert the end of the drain hose into a standpipe.

Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Option 1: Standpipe

Elbow

Bracket

Drain

Hose

Clip the end of the hose into the elbow bracket.

Hang the end of the drain hose over the side of

the laundry tub. Use tie strap to secure the drain

hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Laundry

Tub

Option 2: Laundry Tub

Elbow

Bracket

Tie

Strap

Drain

Hose

• The drain hose should always be properly

secured. Failure to properly secure the drain

hose can result in ﬂ ooding and property

damage.

• Do not install the end of the drain hose higher

than 96 in. (244.8 cm) above the bottom of the

washer.

• The drain must be installed in accordance with

any applicable local codes and regulations.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

NOTE: If the drain hose is extended more than 4

inches beyond the end of the end of the elbow

bracket, mold, or microorganisms could spread to

the inside of the washer.

No more than

4 inches

Elbow Bracket

12

I N S TA L L AT I O N I N S T RUCTIONS

LEVELING THE WASHER

Position the washer in the final location, taking

special care to not pinch, strain, or crush the

water and drain lines. Place a level across the

top of the washer.

1

Leveling Feet

Leveling

Feet

The drum of your new washer spins at very high

speeds, up to 1,300 RPM. To minimize vibration,

noise, and unwanted movement, the floor must be

a perfectly level, solid surface.

NOTE: Adjust the leveling feet only as far as

necessary to level the washer. Extending the

leveling feet more than necessary can cause

the washer to vibrate.

Loosen the locknuts on all 4 leveling feet

until you can turn the feet with the included

wrench. Turn clockwise to raise the washer

or counterclockwise to lower it.

2

Raise

Lower

• All four leveling feet must rest solidly on the

ﬂoor. Rock the washer gently from corner to

corner to make sure that the washer does

not rock.

3

Once the washer is level from side to side and

front to back, tighten all locknuts securely.

Make sure that all 4 leveling feet are in firm

contact with the floor.

NOTE: To make sure that the washer is

properly level, run the washer with a test load:

place approximately 6 pounds of laundry

in the machine. Then, press POWER, press

RINSE+SPIN, and then press the START/

PAUSE button. (See the following sections for

additional information on cycle selection and

operation.)

Verify that the washer does not rock or vibrate

excessively during the spin cycle.

If the washer vibrates or shakes, adjust

the leveling feet until the washer is stable and

retest.

Tighten all 4

locknuts securely

INSTALLATION OF NON-SKID PADS (OPTIONAL)

Some floor surfaces are too slippery to prevent

the washer from moving on the floor during

heavily unbalanced loads. While it is normal for

an occasional load to be out of balance, excess

noise and vibration can result from the washer

moving out of position. If these conditions are

encountered, follow the instructions below for

installation of the non-skid pads. These pads

will help prevent the washer from moving during

heavy out of balance conditions thereby reducing

noise and vibration.

A

B

[ Place the pads under both front feet.

A

B

This side up

Stick adhesive side to floor

Remove backing

• Non-skid pads

13

SORTING WASH LOADS

H OW TO U S E

Fabric Care Labels

Most articles of clothing feature fabric care labels

that include instructions for proper care.

Grouping Similar Items

For best results, sort clothes into loads that can

be washed with the same wash cycle.

Different fabrics have different care requirements.

Always wash dark colors separately from light

colors and whites to prevent discoloration. If

possible, do not wash heavily soiled items with

lightly soiled ones. The chart below shows

recommended groupings.

Bleach

symbols

Any bleach

(when needed)

Only non-chlorine bleach

(when needed)

Do not bleach

Machine

wash

cycle

Normal

Permanent press/

wrinkle resistant

Gentle/

delicate

Hand wash

Do not wash Do not wring

Water

temperature

Hot

(50°C/120°F)

Warm

(40°C/105°F)

Cold/cool

(30°C/85°F)

Fabric Care Labels

Sort Laundry...

by Colors by Soil by Fabric by Lint

Whites Heavy Delicates Lint Producer

Lights Normal Easy Care Lint Collector

Darks Light Sturdy

Loading the Washer

• Check all pockets to make sure that they

are empty. Items such as clips, matches,

pens, coins, and keys can damage both your

washer and your clothes.

• Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling

on other clothes.

• Pretreat heavily stained areas for best results.

• Combine large and small items in a load. Load

large items ﬁ rst.

• Large items should not be more than half of the

total washload.

• The washer can be fully loaded, but the drum

should not be tightly packed with items. The

door of the washer should close easily.

• To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to

the load. Large, bulky items, such as a blanket,

comforter, or bedspread should be washed

individually.

• Do not wash or spin waterproof clothes.

• When unloading the washer, check under the

door seal for small items.

NOTE: The front loading washer rotates the

wet laundry to wash it with less water. If you

do not see the water during washing, it is not

a problem because the laundry is sufﬁ ciently

wet.

REMINDER: The load must have room to

tumble to wash effectively. Just because an

item can be forced into the drum does not

mean it should be washed in the machine. It

must be able to tumble.

14

H OW TO U S E

SELECTING DETERGENT

ABOUT THE DISPENSER

The automatic dispenser consists of four

compartments which hold:

• Liquid fabric softener.

• Liquid or powdered detergent for prewash.

• Liquid or powdered detergent and color-safe

bleach for main wash.

All laundry products can be added at once in

their respective dispenser compartments.

They will be dispensed at the appropriate time

for the most effective cleaning.

After adding the laundry products to the

dispenser, close the dispenser drawer.

To add detergent and fabric softener to the

automatic dispenser:

Open the dispenser drawer.

Load the laundry products into the

appropriate compartments.

Slowly close the dispenser drawer to

avoid early dispensing of the laundry

products.

NOTE: It is normal for a small amount of water to

remain in the dispenser compartments at the end

of the cycle.

1

2

3

IMPORTANT: Do not place or store laundry

products, such as detergent, bleach, or liquid

fabric softener, on top of your washer or dryer.

Wipe up any spills immediately. These products

can damage the finish and controls.

Designed specially to use only

HE (High-Efﬁciency) detergent

IMPORTANT: Your washing machine is

designed for use with only High-Efficiency

(HE) detergents. HE detergents are formulated

specifically for front-load washers and contain

suds-reducing agents. Always look for the HE

symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean.

Using a regular detergent may cause oversudsing

and unsatisfactory performance.

15

Liquid Fabric Softener

Compartment

Prewash Detergent

Compartment

Main Wash Detergent

Compartment

H OW TO U S E

LOADING THE DISPENSER

Prewash Detergent Compartment

Add liquid or powdered detergent to this

compartment when using the Prewash option.

Always use HE (High-Efficiency) detergent with

your washing machine.

• The amount of detergent added for the Prewash

option is 1/2 the amount recommended for the

main wash cycle. For example, if the main wash

cycle requires TWO tablespoons (1 oz. or 30

ml) of detergent, add ONE tablespoon for the

Prewash option.

NOTE: If you are using the Prewash option,

powdered detergent must be used in the main

wash compartment. Liquid detergent will drain

into the washer drum as it is added.

Main Wash Detergent Compartment

This compartment holds laundry detergent

for the main wash cycle, which is added to

the load at the beginning of the cycle. Always

use HE (High-Efficiency) detergent with your

washing machine.

Never exceed the manufacturer’s

recommendations when adding detergent.

Using too much detergent can result in

detergent buildup in clothing and the washer.

Either powdered or liquid detergent may be used.

NOTE: Liquid detergent will drain into the washer

drum as it is added.

NOTE: Liquid or powdered color-safe bleach

may be added to the main wash compartment

with detergent of the same type.

Fabric Softener Compartment

This compartment holds liquid fabric softener,

which will be automatically dispensed during the

final rinse cycle.

• Always follow the manufacturer’s

recommendations when adding fabric softener.

Do not exceed the maximum ﬁ ll line. Using

too much fabric softener may result in stained

clothes.

• Dilute concentrated fabric softeners with warm

water. Do not exceed the maximum ﬁ ll line.

• Never pour fabric softener directly onto the load

or into the drum.

Designed specially to use only

HE (High-Efﬁ ciency) detergent

16

H OW TO U S E

CONTROL PANEL FEATURES

POWER ON/OFF BUTTON

Press to turn the washer ON.

Press again to turn the washer OFF.

NOTE: Pressing the ON/OFF button during a

cycle will cancel that cycle and any load settings

will be lost.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once

the desired cycle has been selected, the standard

presets will be shown in the display. These

settings can be adjusted using the cycle setting

buttons anytime before starting the cycle.

START/PAUSE BUTTON

Press this button to START the selected cycle.

If the washer is running, use this button to PAUSE

the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE

button within 4 minutes of selecting a cycle, the

washer automatically turns off.

1

2

CYCLE SETTING BUTTONS

Use these buttons to select the desired cycle

options for the selected cycle. Press the button

for that setting until the indicator light for the

desired value is lit.

OPTION BUTTONS

The option buttons allow you to select

additional cycle options and will light when

selected. Certain buttons also allow you to

activate special functions by pressing and

holding the button for 3 seconds.

For detailed information about the individual

options, please see the following pages.

LED DISPLAY

The display shows the settings, estimated

time remaining, options, and status messages

for your washer. The display will remain on

through the cycle.

4

5

3

6

17

2

1

3

6

5 4

H OW TO U S E

CYCLE GUIDE

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, or option is available with every cycle.

The cycle guide below shows the options and recommended fabric types for each cycle.

Cycle Fabric type

Wash/Rinse

Temp.

Spin

Water

Plus

Stain

Cycle

Dry

18

SANITARY

MEDIUM

HIGH

NO SPIN

LOW

Heavily soiled

underwear, work

clothes, diapers, etc

EXTRA HOT/COLD

MEDIUM

NO SPIN

LOW

WARM/COLD

WARM/WARM

HOT/COLD

COLD/COLD

BULKY/LARGE

Large items such as

blankets and comforters

MEDIUM

HIGH

NO SPIN

LOW

PERM. PRESS

Dress shirts/pants,

wrinkle free clothing,

poly/cotton blend

clothing, table cloths

WARM/COLD

WARM/WARM

HOT/COLD

COLD/COLD

HIGH

EX HIGH

NO SPIN

LOW

MEDIUM

WARM/COLD

WARM/WARM

HOT/COLD

COLD/COLD

COTTON/

NORMAL

Cotton, linen, towels,

shirts, sheets, jeans,

mixed loads

MEDIUM

HIGH

NO SPIN

LOW

EXTRA HOT/COLD

HOT/COLD

BABY WEAR

MEDIUM

NO SPIN

LOW

COLD/COLD

WARM/COLD

WARM/WARM

DELICATES

Dress shirts/blouses

nylons, sheer or lacy

garments

MEDIUM

NO SPIN

LOW

COLD/COLD

WARM/COLD

WARM/WARM

HAND WASH/

WOOL

Items labeled

"hand washable"

EX HIGH

NO SPIN

LOW

MEDIUM

HIGH

HOT/COLD

COLD/COLD

WARM/COLD

WARM/WARM

SPEED

WASH

Lightly soiled clothing

and small loads

Pre-

Wash

Rinse+

Spin

Extra

Rinse

EX HIGH

NO SPIN

LOW

MEDIUM

HIGH

DRAIN + SPIN

Lightly soiled baby wear

Drain, Spin Only

= Available option = Cycle default settings

H OW TO U S E

THE LED DISPLAY

CYCLE COMPLETION INDICATOR

This portion of the display shows which stage of

the wash cycle is currently underway

(WASH, RINSE, SPIN or DRY).

ESTIMATED TIME REMAINING

When the START/PAUSE button is pressed, the

washer automatically detects the wash load

(weight) and optimizes the washing time, based

on the selected cycle and options. The display

will then indicate the estimated time remaining

for the selected wash cycle.

NOTE: The cycle time displayed may appear

much longer than that of a top-loading washer.

The displayed time is for the complete cycle,

rather than just the agitation portion of the cycle,

as is typically shown on a top-loading washer.

1

2

DOOR LOCK INDICATOR

Indicates that the door is locked. The washer

door will lock while the washer is operating. The

door can be unlocked by pressing the START/

PAUSE button to stop the washer.

NOTE: If the temperature in the washer is too

high, the door cannot be unlocked until the

washer has cooled. If the water level is too

high, select the DRAIN & SPIN cycle to drain

excess water. Do not try to force open the door.

CHILD LOCK INDICATOR

This indicator shows that the washer has

been set for CHILD LOCK. Select this function

to lock the buttons on the control panel and to

prevent tampering.

3

4

The LED display shows the settings, estimated time remaining, options, and status messages

for your washer. When the washer is turned on, the display will illuminate.

19

4

3

2

1

H OW TO U S E

OPERATING THE WASHER

Press the ON/OFF button to turn on the

washer. The lights around the

cycle selector knob will illuminate.

Turn the cycle selector knob to the desired

cycle. The display will show the

preset Rinse/Wash Temperature,

Spin Speed, and Option settings

for that cycle.

If you would like to change the settings for

that cycle, press the appropriate cycle set-

tings button(s) until the indicator light for the

desired setting is lit.

NOTE: To protect your garments, not every

wash/rinse temperature, spin speed, or op-

tion is available with every cycle.

1

2

3

Once you have loaded the washer and added

laundry products (detergent, bleach, and/or

fabric softener):

Press the START/PAUSE button

to begin the cycle. The door will

latch, the display will change,

and the washer will calculate the

estimated time remaining. Once the washer

has calculated the estimated total cycle time,

the washer will start. To pause the cycle at

any time, press PAUSE.

NOTE: The cycle time displayed may

appear much longer than that of a top-

loading washer. The displayed time is for the

complete cycle, rather than just the agitation

portion of the cycle, as is typically shown on

a top-loading washer.

NOTE: If the temperature in the washer is

too high, the door cannot be unlocked until

the washer has cooled. If the water level is

too high, select the DRAIN & SPIN cycle to

drain excess water. Do not try to force the

door open.

Washing time can be reduced significantly

for small or lightly soiled loads by selecting

the Speed Wash cycle and setting the Soil

Level button to Light.

When the load is finished, the beeper (if set)

will sound and the door will unlock.

Remove damp clothes from the washer

immediately. Check under the door seal

for small items.

4

20

La page charge ...

LG WM3455HW Le manuel du propriétaire

LG WM3455HW Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents