Amazon Renewed TT-BH060-cr Manuel utilisateur

Taper
Manuel utilisateur
ACTIVE NOISE CANCELLING WIRELESS STEREO HEADPHONES
User Guide
www.taotronics.com
Produktabbildung
1. ANC-Knopf / -Anzeige
2. Mikrofon
3. 3.5mm Audioanschluss
4. Ladestandsanzeige
5. Power-Knopf
6. Lautstärke - / Vorheriges Lied (langes Drücken)
7. Lautstärke + / Nächstes Lied (langes Drücken)
8. Micro-USB-Ladeanschluss
9. Ladeanzeige
Anmerkung:
Wenn der Akkustand niedrig ist, ertönt eine Ansage.
Drücken Sie den ANC-Knopf, um die Rauschunterdrückung zu
aktivieren / zu deaktivieren. Die Anzeige geht dementsprechend
an / aus.
EN FR IT
DE ES JP
Product Diagram
1. ANC Button
2. Microphone
3. 3.5mm Audio Port
4. Working Indicator
5. Power Button
6. Volume - / Previous Track (long press)
7. Volume + / Next Track (long press)
8. Micro USB Charging Port
9. Charging Indicator
Note:
A voice prompt will be heard when the battery is low.
Switch the ANC Button to activate / deactivate the noise cancellation
function. Its indicator will turn on / off accordingly.
Schéma du Produit
1. Bouton / Voyant ANC
2. Microphone
3. Port Audio 3.5mm
4. Voyant de Fonctionnement
5. Bouton d’Alimentation
6. Volume - / Piste Précédente (pression longue)
7. Volume + / Piste Suivante (pression longue)
8. Port de Charge Micro USB
9. Indicateur de Charge
Note:
Une annonce vocale sera entendue lorsque la batterie est faible.
Utilisez l’interrupteur ANC pour activer / désactiver la fonction de réduction de
bruit. Le voyant s’allumera / s’éteindra en fonction.
Diagrama del Producto
1. Botón de Encendido
2. Micrófono
3. Puerto de Audio de 3,5 mm
4. Indicador de Trabajo
5. Botón de Encendido
6. Volumen - / Pista Anterior (Presión larga)
7. Volumen + / Pista Siguiente (Presión larga)
8. Puerto de Carga Micro USB
9. Indicador de Carga
Nota:
Un indicador de voz se escuchará cuando la batería esté baja.
Presione el botón ANC para activar / desactivar la función de
cancelación de ruido. Su indicador se activará/ desactivará
automáticamente.
Schema del Prodotto
1. Pulsante ANC / Indicatore
2. Microfono
3. Porta Audio da 3,5mm
4. Indicatore di Operazione
5. Pulsante di Accensione
6. Volume - / Traccia Precedente (pressione lunga)
7. Volume + / Traccia Successiva (pressione lunga)
8. Porta di Ricarica Micro USB
9. Indicatore di carica
Note:
Un messaggio vocale verrà riprodotto quando il livello della batteria è basso.
Premere il Pulsante ANC per attivare / disattivare la funzione di cancellazione
del rumore. Il relativo indicatore si accenderà / spegnerà di conseguenza.
EN
Package Contents
1 x TaoTronics Wireless ANC Headphones (TT-BH060)
1 x USB Charging Cable
1 x 3.5mm Audio Cable
1 x Travel Pouch
1 x User Guide
DE
Lieferumfang
1 x TaoTronics Kabellose ANC Kopfhörer (TT-BH060)
1 x USB-Ladekabel
1 x 3.5mm Audiokabel
1 x Reisebeutel
1 x Bedienungsanleitung
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or active
computer USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The headphones are fully charged when the LED indicator turns off.
2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each
other (within 3 feet / 1 meter).
2) Press and hold the Power Button for 5 seconds to bring the headphones
into pairing mode with the LED indicator ashing blue and red.
3) Activate Bluetooth® on your phone and search for nearby Bluetooth®
connections.
4) Find “TaoTronics TT-BH060” in the search results. Tap on the name to connect.
Once connected, the LED indicator will ash blue once every 3 seconds.
Note:
The Bluetooth® headphones can remember previously paired devices. If
you have previously paired the headphones with a device, simply turn on
your device and the headphones, they will connect automatically without
going into pairing mode.
In case the headphones fail to pair with your Bluetooth device, clear the
pairing history by pressing and holding the Power and Volume - Buttons
simultaneously for 7 seconds until you hear a beep tone and the LED
indicator ashes red and blue alternately to start pairing again.
Control Functions
Function
Power on / off
Play / Pause / Answer
/Hang up phone calls
Reject phone calls
Redial
Volume + / -
Previous / Next Track
Operation
Press and hold the Power Button until the LED
indicator ashes / turns off
Press the Power Button once
Press and hold the Power Button for 2 seconds
Press the Power Button twice
Press the Volume + / - Button
Press and hold the Volume + / - Button
Anleitung
1. Ladevorgang
1) Schließen Sie den Ladeanschluss an einem beliebigen USB-Ladeadapter
oder einem aktiven Computer-USB-Anschluss an.
2) Der Ladevorgang beginnt automatisch und die LED-Anzeige wird rot.
3) Die Kopfhörer sind vollständig geladen, wenn sich die LED-Anzeige
ausschaltet.
2. Koppeln
1) Gehen Sie sicher, dass sich die Kopfhörer und Ihr Bluetooth®-Gerät
nebeneinander benden (innerhalb von 1 Meter / 3 Fuß).
2) Halten Sie den Multifunktionsknopf 5 Sekunden lang gedrückt, um die
Kopfhörer in den Kopplungsmodus zu versetzen. Die LED-Anzeige blinkt
dann blau und rot.
3) Aktivieren Sie die Bluetooth®-Funktion Ihres Handys und suchen Sie nach
Bluetooth®-Verbindungen in der Nähe:
4) Suchen Sie in den Suchergebnissen nach “TaoTronics TT-BH060”. Tippen Sie
zum Verbinden auf den Namen. Wenn die Verbindung erfolgreich war, blinkt
die LED-Anzeige alle 3 Sekunden blau.
Anmerkung:
Die Bluetooth®-Kopfhörer können sich bereits gekoppelte Geräte merken.
Wenn Sie die Kopfhörer vorher bereits mit einem Gerät gekoppelt haben,
schalten Sie Ihr Gerät und die Kopfhörer einfach ein. Sie werden sich
automatisch mit dem zuletzt verbundenen Gerät verbinden, ohne in den
Kopplungsmodus wechseln zu müssen.
Wenn sich die Kopfhörer nicht mit Ihrem Bluetooth® Gerät koppeln können,
löschen Sie den Kopplungsverlauf durch drücken und halten der
Steuerungsfunktionen
Funktion
Ein- / Ausschalten
Wiedergabe / Pause /
Anruf annehmen /
Telefonat auegen
Anruf ablehnen
Wahlwiederholung
Lautstärke + / -
Vorheriges / Nächstes Lied
Bedienung
Halten Sie den Power-Knopf gedrückt, bis die
LED-Anzeige blinkt / sich abschaltet
Drücken Sie den Power-Knopf einmal
Halten Sie den Power-Knopf 2 Sekunden lang
gedrückt
Drücken Sie den Power-Knopf zweimal
Drücken Sie die Knöpfe Lautstärke + / -
Halten Sie die Knöpfe Lautstärke + / - gedrückt
TT-BH060
EUROPE
E-mail:
support.uk@taotronics.com(UK)
support.de@taotronics.com(DE)
support.fr@taotronics.com(FR)
support.es@taotronics.com(ES)
support.it@taotronics.com(IT)
EU Importer: ZBT International Trading GmbH, Halstenbeker Weg 98C,
25462 Rellingen, Deutschland
NORTH AMERICA
E-mail : support@taotronics.com(US)
support.ca@taotronics.com(CA)
Tel : 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)
Address: 46724 Lakeview Blvd, Fremont, CA 94538
Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
www.taotronics.com
MANUFACTURER
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/downloads-TT-BH060-CE-Cert.html
ASIA PACIFIC
MADE IN CHINA
Power-Knopf und Lautstarke – Tasten für 7 Sekunden gleichzeitig, bis ein
Piepton zu vernehmen ist und die LED-Anzeige abwechselnd rot und blau
blinken. Jetzt werden die Kopfhörer automatisch in den Kopplungmodus
übergehen.
1
2
3
4
5
6
7
9
8
JP
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference,
and(2) this device must accept any interference received, including
interference that may cause undesired operation.
EN The Bluetooth
®
word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by Sunvalleytek International Inc. is under license. Other
trademarks and trade names are those of their respective owners.
DE Die Marke Bluetooth
®
und das Bluetooth Logo sind eingetragene
Markenzeichen der Bluetooth SIG, Inc. und jegliche Verwendung dieser
Marke durch Sunvalleytek International Inc. ist lizensiert. Die Rechte an
anderen Markenzeichen liegen beim jeweiligen Eigentümer.
FR Le terme et les logos Bluetooth
®
sont la propriété de Bluetooth SIG, Inc. et
toute utilisation de ces marques par Sunvalleytek International Inc. se fait
sous licence. Les autres désignations commerciales et marques
mentionnées sont détenues par leur propriétaire respectif.
ES La marca Bluetooth
®
y los logotipos son de propiedad de Bluetooth SIG,
Inc. y se encuentra autorizado cualquier uso de estas marcas por parte de
Sunvalleytek International Inc. Otras marcas y nombres comerciales son
aquellas de sus respectivos propietarios.
IT La parola e i loghi Bluetooth
®
sono marchi di fabbrica registrati di
proprietà di Bluetooth SIG, Inc. e qualsiasi utilizzo di questi marchi da parte
di Sunvalleytek International Inc. avviene su licenza. Gli altri marchi di
fabbrica e nomi commerciali appartengono ai rispettivi proprietari.
JP Bluetooth SIG, Inc.
Sunvalleytek International Inc.
Funciones de Control
Función
Encender / Apagar
Reproducir / Pausa /
Contestar / Colgar
Llamadas Telefónicas
Rechazar Llamadas
Telefónicas
Volver a Marcar
Volumen + / -
Pista Anterior / Siguiente
Operación
Mantenga presionado el Botón de Encendido
hasta que el indicador LED parpadee / se
apague
Presione el Botón de Encendido una vez
Presione y sostenga el Botón de Encendido
por 2 segundos
Presione el Botón de Encendido dos veces
Presione el Botón de Volumen + / -
Mantenga presionado el Botón de Volumen
+ / -
Funzioni di Controllo
Funzione
Accendere / spegnere
Riproduzione / Pausa /
Rispondere a /
Riattaccare una
chiamata
Riutare una chiamata
Ricomposizione
Volume + / -
Traccia Precedente /
Successiva
Operazione
Premere e tenere premuto il Pulsante di
Accensione nché l'indicatore LED
lampeggia / si spegne
Premere una volta il Pulsante di Accensione
Premere e tenere premuto il Pulsante di
Accensione per 2 secondi
Premere due volte il Pulsante di Accensione
Premere il Pulsante Volume + / -
Premere e tenere premuto il Pulsante Volume
+ / -
IT
Contenuto della Confezione
1 x Paio di Cufe Wireless ANC TaoTronics (Modello: TT-BH060)
1 x Cavo di Ricarica USB
1 x Cavo Audio da 3,5mm
1 x Custodia da Viaggio
1 x Manuale Utente
Modalità di Utilizzo
1. Ricarica
1) Connettere la porta di ricarica con qualsiasi adattatore di ricarica USB o con
una porta USB attiva del computer.
2) La ricarica inizierà automaticamente con l'indicatore LED che diventerà rosso.
3) La cufe sono completamente cariche quando l'indicatore LED si spegne.
2. Accoppiamento
1) Assicurarsi che le cufe e il proprio dispositivo Bluetooth® siano vicini (entro 3
piedi / 1 metro).
2) Premere e tenere premuto il Pulsante Multifunzione per 5 secondi per
portare le cufe in modalità di accoppiamento. L'indicatore LED
lampeggerà di blu e rosso.
3) Attivare la funzione Bluetooth® sul proprio telefono e cercare le connessioni
Bluetooth® nelle vicinanze.
4) Trovare “TaoTronics TT-BH060” nei risultati di ricerca. Premere sul nome per
collegare. Una volta collegate le cufe, l'indicatore LED lampeggerà di blu
ogni 3 secondi.
Nota:
Le cufe Bluetooth® possono ricordare i dispositivi accoppiati in precedenza.
Se le cufe sono già state accoppiate con un dispositivo, sarà sufciente
accendere il dispositivo e le cuff ie, che si collegheranno automaticamente
al dispositivo senza dover attivare la modalità di accoppiamento.
Nel caso che le cufe non accoppiano con il Suo dispositivo Bluetooth,
prego di premere e tenere premuto il tasto di accensione e il pulsante
Volume - nello stesso tempo per 7 secondi per elimiare la cronologia
dell'associazione nché vengono emesso 1 segnale acustico Bip e
FR
Contenu de la Boîte
1 x TaoTronics Casque Sans Fil ANC (TT-BH060)
1 x Câble de Charge USB
1 x Câble Audio 3.5mm
1 x Sacoche de Transport
1 x Guide d’Utilisateur
Comment l’Utiliser
1. Charge
1) Branchez le port de charge à n’importe quel adaptateur USB de charge ou un
port USB d’ordinateur actif.
2) La charge se lancera automatiquement avec le voyant à LED s’allumant en
rouge.
3) Le casque est entièrement chargé lorsque le voyant à LED s’éteint.
2. Appairage
1) Assurez-vous que le casque et votre appareil Bluetooth® sont proches l’un de
l’autre (moins de 3 pieds / 1 mètre).
2) Appuyez et maintenez le Bouton d’Alimentation pendant 5 secondes pour
passer le casque en mode appairage avec le voyant à LED clignotant en bleu
et rouge.
3) Activez la fonction Bluetooth® sur votre téléphone et recherchez les
appareils Bluetooth® à proximité:
4) Trouvez “TaoTronics TT-BH060” dans la liste. Touchez pour vous y connecter.
Une fois connecté, le voyant à LED clignotera en bleu toutes les 3 secondes.
Note:
Le casque Bluetooth® peut se souvenir des appareils précédemment
connectés. Si vous avez déjà appairé le casque avec un appareil, il suft
d’allumer l’appareil et le casque, ils se connecteront ensemble
automatiquement sans passer par le mode appairage.
Si le casque ne parvient pas à être couplé avec votre périphérique Bluetooth,
effacez l'historique d'appairage en appuyant simultanément sur les Boutons
d’Alimentation et Volume - pendant 7 secondes jusqu'à ce que vous entendez
un bip sonore et que le voyant à LED clignote alternativement en rouge et bleu
pour relancer l’appairage.
ES
Contenidos del Paquete
1 x Auriculares Inalámbricos ANC de TaoTronics (TT-BH060)
1 x Cable de Carga USB
1 x Cable de Audio de 3,5 mm
1 x Bolsa de Viaje
1 x Guía del Usuario
Cómo Utilizar
1. Carga
1) Conecte el puerto de carga a cualquier adaptador de carga USB o puerto
USB de un ordenador.
2) La carga se iniciará automáticamente y el indicador LED se iluminará en rojo.
3) Los Auriculares están completamente cargados cuando el indicador LED se
apaga.
2. Emparejamiento
1) Asegúrese de que los auriculares y su dispositivo Bluetooth® estén uno al
lado del otro (dentro de 3 pies / 1 metro).
2) Mantenga presionado el Botón Multifunción durante 5 segundos para
poner los auriculares en modo de emparejamiento, el indicador LED
parpadeará en azul y rojo.
3) Active la función Bluetooth® en su teléfono y busque las conexiones
Bluetooth® más cercanas:
4) Encuentre " TaoTronics TT-BH060 " en los resultados de búsqueda. Toque el
nombre para conectarse. Una vez conectado, el indicador LED parpadeará
en azul una vez cada 3 segundos.
Nota:
• Los auriculares Bluetooth® pueden recordar dispositivos
previamente emparejados. Si ya han emparejado los auriculares con
un dispositivo, simplemente encienda su dispositivo y los auriculares,
estos se conectarán al último dispositivo conectado
automáticamente sin entrar en el modo de emparejamiento.
Cuando los auriculares no se sincronicen con su dispositivo Bluetooth, borre el
historial de emparejamiento manteniendo presionados los botones de
Fonctionnalités
Fonction
Allumage / Extinction
Lecture / Pause /
Répondre / Raccrocher
Rejeter un appel
Rappeler le dernier
appelant
Volume + / -
Piste précédente /
suivante
Opération
Appuyez et maintenez le Bouton d’Alimentation
jusqu’à ce que le voyant à LED clignote / s’éteigne
Appuyez sur le Bouton d’Alimentation une fois
Appuyez et maintenez le Bouton
d’Alimentation pendant 2 secondes
Appuyez sur le Bouton d’Alimentation deux fois
Appuyez sur le Bouton Volume + / -
Appuyez et maintenez le Bouton Volume + / -
encendido y volumen al mismo tiempo durante 7 segundos hasta que se
escuche un pitido y el indicador LED parpadee en rojo y azul alternativamente
para comenzar de nuevo el emparejamiento.
l'indicatore LED lampeggia in rosso e blu alternatamente per entrare di
nuovo nella modalità di associazione.
1 / 1

Amazon Renewed TT-BH060-cr Manuel utilisateur

Taper
Manuel utilisateur