Miele SEB 217-3 Le manuel du propriétaire

Operating Instructions for

the Powerbrushes

Instructions pour l’utilisation

des brosses électriques

Manual de operaciones para los

Cepillos eléctricos

SEB 213 / 213-2

SEB 217 / 217-2 / 217-3

M.-Nr. 07 871 120

en, fr, es - US, CA, MX

IMPORTANT SAFETY INSTRUCTIONS

Identifying the Components

Description of the Powerbrushes

Connecting the Powerbrush

Operation

Maintenance and Care

MESURES DE SÉCURITÉ IMPORTANTES

Identification des pièces composantes

Description des brosses électriques

Raccordement de la brosse électrique

Utilisation

Nettoyage et entretien

INSTRUCCIONES DE SEGURIDAD IMPORTANTES

Información eléctrica

Identificación de las piezas

Descripción de los cepillos eléctricos

Conectando el cepillo eléctrico

Operación

Mantenimiento y cuidados

2

When using an electrical appliance, always observe basic safety precautions,

including the following:

READ THESE INSTRUCTIONS COMPLETELY BEFORE USING THESE

ACCESSORIES FOR THE FIRST TIME.

KEEP THESE OPERATING INSTRUCTIONS FOR FUTURE REFERENCE.

These accessories are intended for

household use with a Miele vacuum

cleaner only. Do not use it them on

people or animals.

Damage can occur with improper

use of these accessories, or if the

accessories are used for purposes

other than those for which they were

designed. This includes connecting

them to a non-Miele vacuum

cleaner.

Use the accessories only as

described in this manual.

To reduce the risk of fire, electric

shock, or injury:

~

Do not use the vacuum outdoors or

on wet surfaces.

~

Check the voltage rating of the

power-brush before connecting it to the

vacuum cleaner. Your power supply

should correspond to the voltage rating

listed on the data plate of both the

powerbrush and the vacuum cleaner.

Use only AC outlets. Connecting the

vacuum or powerbrush to a higher

voltage than indicated on the data plate

will damage the powerbrush and may

result in personal injury.

~

Do not leave the appliance when

plugged in. Unplug it from the outlet

when not in use and before servicing.

~

The accessories are designed for

direct connection to Miele vacuum

cleaners ONLY. Do not use extension

cords, modify the plugs, or attempt to

connect any of the accessories to a

non-Miele vacuum cleaner. Doing so

could damage the powerbrush or other

accessories and cause personal injury.

~

Only dry dirt should be vacuumed

with these Accessoires.

~

The powerbrush, electric wands and

electric hoses are not toys. Do not allow

children to play with them, and pay

close attention if they are used on or

around children.

~

If the appliances are not working

correctly, have been dropped,

damaged, left outdoors, or immersed in

water, do not use them. Bring them to

your Miele dealer for servicing.

~

Do not run the powerbrush over the

vacuum cleaner cord or extension

cords, and keep it away from heated

surfaces.

en - IMPORTANT SAFETY INSTRUCTIONS

3

~

Do not handle the appliance with

wet hands.

~

Turn off all controls before

unplugging the vacuum or powerbrush.

~

Do not use the powerbrush to

vacuum anything that may damage the

rollers. Nails, safety pins, buttons, etc.

should not be vacuumed.

~

Keep hair, loose clothing, fingers

and all parts of the body away from any

openings or moving parts, and never

touch a rotating roller brush.

~

Use extra care when vacuuming

while on stairs.

~

Do not use the vacuum to pick up

flammable or combustible liquids, such

as gasoline, or use it in areas where

fumes may be present.

~

Do not use the vacuum or

powerbrush to pick up liquids. This also

applies to freshly shampooed carpets

or rugs. Wait until they are dry before

vacuuming.

~

Do not pick up items that are

burning or smoking, such as cigarettes,

matches, or hot ashes.

~

The vacuum and accessories

should only be cleaned when

disconnected from the power supply.

Use a dry or slightly damp cloth ONLY.

Never submerse the vacuum or

accessories in water or use a dripping

wet rag.

~

The powerbrush will shut off

automatically if the rollers are

prevented from turning; for example if a

large object has been vacuumed.

Should this occur, unplug the vacuum

cleaner before correcting the problem.

Allow2-3minutes for this safety

feature to reset itself before restarting

the vacuum.

~

Use only Miele attachments and

accessories. Use of non-Miele

designed items will decrease the

efficiency of your machine and may be

dangerous.

~

Do not attempt any repairs other

than those listed in the "Maintenance

and care section. Any other required

service should be performed by an

Authorized Miele Service Agent.

~

Always unplug the machine before

connecting or disconnecting any

accessories from the vacuum cleaner.

SAVE THESE

INSTRUCTIONS

en - IMPORTANT SAFETY INSTRUCTIONS

4

Electric hose SES 100 or 105 Electric hose SES 113

en - Identifying the Components

5

Electric hose SES 116 Electric hose SES 117

en - Identifying the Components

6

Electric hose SES 118 Electric hose SES 119

en - Identifying the Components

7

Electric hose SES 125 Electric hose SES 130

en - Identifying the Components

8

Electric Wand SET 210 / SET 220

The SET 210 / SET 220 is an electric

wand that carries power to the

Powerbrush through internal cabling. It

can be identified by a small plug at the

top rear and bottom rear of the wand.

en - Identifying the Components

9

SEB 213

a SEB 213 housing

b SEB 213 power cord

c Non-electric suction wand

SEB 217

d SEB 217 housing

e Direct Connection

f SET 210 / SET 220

en - Description of the Powerbrushes

10

Upright vacuums Connecting the SEB 217 to an upright vacuum cleaner.

en - Connecting the Powerbrush

11

Canister vacuums

The connection procedure will vary

depending upon which vacuum,

electric hose, suction wand and

powerbrush model you purchased.

Please find the combination of

components you have on the following

pages and use those instructions to

connect the powerbrush to your

vacuum cleaner.

en - Connecting the Powerbrush

12

Combination 1 - SEB 213 and SES 100 or SES 105

en - Connecting the Powerbrush

13

Combination 2 - SEB 213-2 and SES 113

en - Connecting the Powerbrush

14

Combination 3 - SEB 217-2, SET 220 and SES 118

en - Connecting the Powerbrush

15

Combination 4 - SEB 217-3, SET 220 and SES 116

en - Connecting the Powerbrush

16

Combination 5 - SEB 217-3, SET 220 and SES 117

en - Connecting the Powerbrush

17

Combination 6 - SEB 217-3, SET 220 and SES 119

en - Connecting the Powerbrush

18

Combination 7 - SEB 217-3, SET 220 and SES 130

en - Connecting the Powerbrush

19

Recommended use

Observe the cleaning instructions of

the floor manufacturer.

The Powerbrush is particularly suitable

for cleaning and restoring crushed

carpet pile of wall to wall carpeting and

floor coverings subject to hard wear,

especially in high traffic areas.

To clean hard flooring, it is better to use

the floor brush.

Do not use the powerbrush on:

– Floors with a variable or uneven

surface. The brush could come into

contact with the floor and cause

damage.

– High quality, hand knotted rugs, for

example Berber or Persian rugs, as

well as extremely long piled area

rugs and carpets. There is a danger

of the threads being pulled out. Turn

the powerbrush off to vacuum these

types of floor coverings and use only

suction.

Turning on the Powerbrush

SEB 217 with an upright vacuum

cleaner

The Powerbrush will start automatically

when the vacuum cleaner is turned on.

SEB 213 and SEB 217

The powerbrush can only be turned on

if the vacuum cleaner is also on. The

switch that controls the power brush

can be found on the hose handle.

Using the Powerbrush

^

To achieve the best results, slowly

pass the Powerbrush back and forth

over the carpet.

Operation

Indicator light

The electrobrush warning light has a

double function.

It lights

–

yellow, when the brush is in use

– red, if the brush roller is blocked.

This can occur if enough threads

wrap around it or if a large or long

object has been vacuumed up.

^ Turn off the vacuum cleaner and

unplug the power cord.

^ Remove the object preventing the

roller from turning (see the

"Maintenance and Care" section).

^

Wait approximately 2-3 minutes for

this safety feature to reset before

turning the vacuum cleaner back on.

en - Operation

20

La page est en cours de chargement...

Miele SEB 217-3 Le manuel du propriétaire

Ce manuel convient également à

Miele SEB 217-3 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents