Electrolux EFI60021S Manuel utilisateur

Catégorie
Hottes
Taper
Manuel utilisateur
EFI 60021
User manual
electrolux 3electrolux 3
electrolux 3electrolux 3
electrolux 3
GB
WW
WW
W
elcome to the world of Electrelcome to the world of Electr
elcome to the world of Electrelcome to the world of Electr
elcome to the world of Electr
oluxolux
oluxolux
olux
Thank you for choosing a first class
product from Electrolux, which
hopefully will provide you with lots of
pleasure in the future. The Electrolux
ambition is to offer a wide variety of
quality products that make your life
more comfortable. You find some
examples on the cover in this manual.
Please take a few minutes to study this
manual so that you can take advantage
of the benefits of your new machine.
We promise that it will provide a
superior User Experience delivering
Ease-of-Mind. Good luck!
44
44
4
electr electr
electr electr
electr
oluxolux
oluxolux
olux contents
GB
Contents
Safety warnings ................................ 5
Description of the Appliance ............. 7
Control Panel.................................... 8
Maintenance and Care ..................... 9
Special accessories ........................ 14
Something Not Working .................. 14
Installation ...................................... 15
The following symbols are used in this user manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
General information and tips.
Environmental information.
electroluxelectrolux
electroluxelectrolux
electrolux
safety warnings
55
55
5
GB
Safety warnings
When used as an extractor unit, the
hood must be fitted with a hose
having preferably the same diameter
as the outlet hole.
Attention: Attention:
Attention: Attention:
Attention: The hose is not supplied
and must be purchased separately.
The minimum distance between the
supporting surface for the cooking
vessels on the hob and the lowest
part of the range hood must be not
less than
60cm60cm
60cm60cm
60cm from electric cookers
and
70cm70cm
70cm70cm
70cm from gas or mixed
cookers.
If the instructions for installation for
the gas hob specify a greater
distance, this must be adhered to.
Before any cleaning or maintenance
operation, disconnect the hood from
the mains by removing the plug or
disconnecting the home mains
switch.
The appliance is not intended for use
by children or persons with impaired
physical, sensorial or mental faculties,
or if lacking in experience or know-
how, unless they are under
supervision or have been trained in
the use of the appliance by a person
responsible for their safety.
Children should be monitored to
ensure that they do not play with the
appliance.
Never use the hood without
effectively mounted grating.!
The hood must NEVER be used as a
support surface unless specifically
indicated.
The premises must be sufficiently
ventilated, when the kitchen hood is
used together with other gas
combustion devices or other fuels.
The suctioned air must not be
conveyed into a conduit used for the
disposal of the fumes generated by
appliances that combust gases or
other fuels.
The flaming of foods beneath the
hood itself is severely prohibited.
The use of exposed flames is
detrimental to the filters and may
cause a fire risk, and must therefore
be avoided in all circumstances.
Any frying must be done with care in
order to make sure that the oil does
not overheat and burst into flames.
As regards the technical and safety
measures to be adopted for fume
discharging it is important to closely
follow the relations provided by the
competent authorities.
The hood must be regularly cleaned
on both the inside and outside (AT
LEAST ONCE A MONTH, it is in any
event necessary to proceed in
accordance with the maintenance
instructions provided in this manual)..
Failure to follow the instructions as
concerns hood and filter cleaning will
lead to the risk of fires.
Do not use or leave the hood without
the lamp correctly mounted because
of the possible risk of electric shocks.
66
66
6
electr electr
electr electr
electr
oluxolux
oluxolux
olux safety warnings
GB
We decline any responsibility for any
problems, damage or fires caused to
the appliance as the result of the
non-observance of the instructions
included in this manual.
This appliance is marked according to
the European directive 2002/96/EC on
Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product.
The symbol on the product, or on
the documents accompanying the
product, indicates that this appliance
may not be treated as household
waste. Instead it should be taken to the
appropriate collection point for the
recycling of electrical and electronic
equipment.
Disposal must be carried out in
accordance with local environmental
regulations for waste disposal.
For more detailed information about
treatment, recovery and recycling of
this product, please contact your local
council, your household waste disposal
service or the shop where you
purchased the product.
electrolux electrolux
electrolux electrolux
electrolux description of the appliance
77
77
7
GB
Description of the Appliance
The cooker hood is designed toThe cooker hood is designed to
The cooker hood is designed toThe cooker hood is designed to
The cooker hood is designed to
extract unpleasant odours frextract unpleasant odours fr
extract unpleasant odours frextract unpleasant odours fr
extract unpleasant odours fr
om theom the
om theom the
om the
kitchen, it will not extract steam.kitchen, it will not extract steam.
kitchen, it will not extract steam.kitchen, it will not extract steam.
kitchen, it will not extract steam.
The cooker hood is supplied ready for
use as a recirculation hood and may
be used for extraction by removing
the charcoal filter which has been
fitted inside the cooker hood.
Extraction modeExtraction mode
Extraction modeExtraction mode
Extraction mode
In this mode fumes are extracted to
the outside via a
hosehose
hosehose
hose connected to
the
coupling ringcoupling ring
coupling ringcoupling ring
coupling ring.
Note:Note:
Note:Note:
Note: The coupling ring may be
placed on the top or on the rear
exhaust according to the needs.
In order to obtain the best performan-
ce the hose should have a diameter
equal to the outlet hole.
RecirRecir
RecirRecir
Recir
culation modeculation mode
culation modeculation mode
culation mode
The air is filtered through a
charchar
charchar
char
coalcoal
coalcoal
coal
filterfilter
filterfilter
filter and returned to the kitchen.
Rear
Top
TT
TT
T
opop
opop
op
RearRear
RearRear
Rear
HoseHose
HoseHose
Hose
Coupling
ring
Rear view
To the outside
88
88
8
electr electr
electr electr
electr
oluxolux
oluxolux
olux description of the appliance
GB
Control Panel
Best results are obtained by using a
low speed for normal conditions and
a high speed when odours are more
concentrated.
Turn the hood on a few minutes
before you start cooking.
The hood should be left on after
cooking for about 15 minutes or until
all the odours have disappeared.
The control switches are located on
the unit’s front panel:
the
light switchlight switch
light switchlight switch
light switch switches the hood
lamp on and off
the
motor switchmotor switch
motor switchmotor switch
motor switch switches the motor
on and off, enabling you to select one
of the three different speeds.
The hood is also equipped with a
micro-switch which can be found under
the lower runner of the visor on the
right hand side.
With this micro-switch, the appliance
may be automatically switched on and
off by opening and closing the pull-out
panel, but only if the fan speed has
already been set and the light switch is
turned to “
II
II
I”.
Light switch
Motor switch
- control panel
electrolux electrolux
electrolux electrolux
electrolux maintenance and care
99
99
9
GB
Maintenance and Care
Attention! Attention!
Attention! Attention!
Attention! Before performing any maintenance operation, isolate the hood from
the electrical supply by switching off at the connector and removing the connector
fuse.
Or if the appliance has been connected through a plug and socket, then the plug
must be removed from the socket.
The purpose of the grease filters is to
absorb grease particles which form
during cooking and it
mustmust
mustmust
must always be
used, either in the external extraction
or internal re-circulation function.
The synthetic filter is very thin
(approx. 1 mm) and positioned on the
inside of its related support grill.
The filter should be changed once a
month.
The grill should be cleaned with luke
warm water and non-abrasive
detergent when you change the filter.
The grease filter can be ordered from
your local Service Force Centre.
Opening the grill:Opening the grill:
Opening the grill:Opening the grill:
Opening the grill:
Move the handles upwards, then
extract the grill/filter outwards.
Removing the synthetic filter:Removing the synthetic filter:
Removing the synthetic filter:Removing the synthetic filter:
Removing the synthetic filter:
Remove the stops to take out the
filter.
TT
TT
T
o ro r
o ro r
o r
efit the grill: efit the grill:
efit the grill: efit the grill:
efit the grill: fit above on the
appropriate supports, and fixed in the
lower part with the handles.
Clean the inner housing using a hand
hot solution only(never use caustic
detergents, abrasive powders or
brushes).
1010
1010
10
electr electr
electr electr
electr
oluxolux
oluxolux
olux maintenance and care
GB
CharChar
CharChar
Char
coal filtercoal filter
coal filtercoal filter
coal filter
The charcoal filter should only be
used if you want to use the hood in
recirculation mode.
The charcoal filter cannot be washed
nor regenerated.
The charcoal filter should be replaced
every 4 months under normal use.
Replacement filters are available from
your local Service Force Centre.
FittingFitting
FittingFitting
Fitting
Remove the grill or the metal grease
filter.
Place the charcoal filter to cover the
grill that protects the extraction motor
so that the slots on the filter
correspond to the pins on the sides
of the motor protection grill.
Turn the filter clockwise in order to
lock the filter into position.
Remount the grid or the metal grease
filter.
TT
TT
T
o ro r
o ro r
o r
emoveemove
emoveemove
emove proceed in the reverse
order.
Always specify the hood model code
number and serial number when
ordering replacement filters. This
information is shown on the rating
plate located on the inside of the unit.
The charcoal filter can be ordered
from your local Service Force Centre.
electrolux electrolux
electrolux electrolux
electrolux maintenance and care
1111
1111
11
GB
WW
WW
W
arar
arar
ar
ningning
ningning
ning
Failure to observe the instructions on
cleaning the unit and changing the
filters will cause a fire hazard. You are
therefore strongly recommended to
follow these instructions.
The manufacturer declines all
responsibility for any damage to the
motor or any fire damage linked to
inappropriate maintenance or failure
to observe the above safety
recommendations.
Changing the light bulb(s)Changing the light bulb(s)
Changing the light bulb(s)Changing the light bulb(s)
Changing the light bulb(s)
Disconnect the cooker hood frDisconnect the cooker hood fr
Disconnect the cooker hood frDisconnect the cooker hood fr
Disconnect the cooker hood fr
omom
omom
om
the mains supplythe mains supply
the mains supplythe mains supply
the mains supply
..
..
.
Prior to touching the light bulbsPrior to touching the light bulbs
Prior to touching the light bulbsPrior to touching the light bulbs
Prior to touching the light bulbs
ensurensur
ensurensur
ensur
e they are they ar
e they are they ar
e they ar
e cooled down.e cooled down.
e cooled down.e cooled down.
e cooled down.
Remove the grill or the metal grease
filter.
Replace the old bulb with a new one
of the same type.
Remount the grid or the metal grease
filter.
If the light does not come on, make
sure the bulb has been inserted
correctly before contacting your local
Service Force Centre.
1212
1212
12
electr electr
electr electr
electr
oluxolux
oluxolux
olux maintenance and care
GB
Cleaning the hoodCleaning the hood
Cleaning the hoodCleaning the hood
Cleaning the hood
Clean the outside of the hood using a
damp cloth and a solution of water
and mild washing up liquid.
Never use corrosive, abrasive or
flammable cleaning products or
products containing bleach.
Never insert pointed objects in the
motor’s protective grid.
Only ever clean the switch panel and
filter grill using a damp cloth and mild
washing up liquid.
Clean all the plastic parts with a soft
cloth soaked in warm water and
neutral soap.
It is extremely important to clean the
unit and change the filters at the
recommended intervals. Failure to do
so will cause grease deposits to build
up that could constitute a fire hazard.
electrolux electrolux
electrolux electrolux
electrolux special accessories
1313
1313
13
GB
Special accessoriesSpecial accessories
Special accessoriesSpecial accessories
Special accessories
CharChar
CharChar
Char
coal filtercoal filter
coal filtercoal filter
coal filter type 29
Something Not Working
If your appliance fails to work properly please carry out the following checks.
SymptomSymptom
SymptomSymptom
Symptom
The cooker hood will not start...
The cooker hood is not working
The cooker hood has switched off
during operation...
SolutionSolution
SolutionSolution
Solution
Check that: Check that:
Check that: Check that:
Check that: The hood is connected
to the electricity supply.
Check that a fan speed has been
selected.
Check that: Check that:
Check that: Check that:
Check that: The fan speed is set high
enough for the task.
The grease filters are clean.
The kitchen is adequately vented to
allow the entry of fresh air.
If set up for recirculation, check that
the charcoal filter is still effective.
If set up for extraction, check that the
ducting and outlets are not blocked.
The safety cut-out device has been
tripped. Turn off the hob and then wait
for the device to reset. If the hood has
been installed below the heights
indicated in the installation instructions
the motor will cut-out frequently which
will damage the hood.
If after all these checks, the problem persists, contact your local Service Centre,
quoting the model and serial number.
Please note that it will be necessary to provide proof of purchase for any in-
guarantee service calls.
In-guarantee customers should ensure that the above checks have been made as
the engineer will make a charge if the fault is not a mechanical or electrical
breakdown.
1414
1414
14
electr electr
electr electr
electr
oluxolux
oluxolux
olux installation
GB
Installation
TT
TT
T
echnical Detailsechnical Details
echnical Detailsechnical Details
echnical Details
Dimensions (in cm):Dimensions (in cm):
Dimensions (in cm):Dimensions (in cm):
Dimensions (in cm):
Height : 400
Width: 599
Depth: 270
MaximumMaximum
MaximumMaximum
Maximum
absorbedabsorbed
absorbedabsorbed
absorbed
power:power:
power:power:
power: 180 W
Motor: 100 W
Lighting: 2x40 W (E14)
Length of the cable:Length of the cable:
Length of the cable:Length of the cable:
Length of the cable:
150 cm150 cm
150 cm150 cm
150 cm
Electrical connection:Electrical connection:
Electrical connection:Electrical connection:
Electrical connection:
220-240W220-240W
220-240W220-240W
220-240W
Fuse rating:Fuse rating:
Fuse rating:Fuse rating:
Fuse rating:
5A T5A T
5A T5A T
5A T
Mounting accessories includedMounting accessories included
Mounting accessories includedMounting accessories included
Mounting accessories included
1 spacer
2 brackets
2 hooks
1 deflector
2 plastic washers for the spacer
2 wall plugs
1 screw 2,9x9,5 to affix the deflector/coupling ring on the outlet hole
4 screws 4.5 x 16 (to affix the cooker hood sideways)
8 screws 4.5 x 13 (to affix a wooden panel to the cabinet door).
2 screws 3.5 x 9.5 (to affix the spacer to the cooker hood)
2 screws 5 x 45 (fixing the hooks)
1 coupling ring Ø 120 mm
2 screws 5x18
2 screws 5x10 to fix the brackets
2 bushes to fix the brackets
electrolux electrolux
electrolux electrolux
electrolux installation
1515
1515
15
GB
Electrical connection
Safety warSafety war
Safety warSafety war
Safety war
nings for the electriciannings for the electrician
nings for the electriciannings for the electrician
nings for the electrician
The mains power supply must
correspond to the rating indicated on
the plate situated inside the hood. If
provided with a plug connect the hood
to a socket in compliance with current
regulations and positioned in an
accessible area. If it not fitted with a
plug (direct mains connection) or if the
plug is not located in an accessible
area apply a bi-polar switch in
accordance with standards which
assures the complete disconnection of
the mains under conditions relating to
over-current category III, in accordance
with installation instructions.
IMPORIMPOR
IMPORIMPOR
IMPOR
TT
TT
T
ANTANT
ANTANT
ANT
: :
: :
: Before re-connecting the
hood circuit to the mains supply and
checking the efficient function, always
check that the mains cable is correctly
assembled.
1616
1616
16
electr electr
electr electr
electr
oluxolux
oluxolux
olux installation
GB
InstallationInstallation
InstallationInstallation
Installation
Make surMake sur
Make surMake sur
Make sur
e that the cooker hood is disconnected fre that the cooker hood is disconnected fr
e that the cooker hood is disconnected fre that the cooker hood is disconnected fr
e that the cooker hood is disconnected fr
om the power supply beforom the power supply befor
om the power supply beforom the power supply befor
om the power supply befor
ee
ee
e
carrying out the installation.carrying out the installation.
carrying out the installation.carrying out the installation.
carrying out the installation.
BeforBefor
BeforBefor
Befor
e beginning installatione beginning installation
e beginning installatione beginning installation
e beginning installation
Remove and keep the extraction grill
or the metal grease filter.
Note:Note:
Note:Note:
Note: This is to be inserted once
installation is completed.
Remove and keep the charcoal filter/s
(see also relative paragraph).
Note: Note:
Note: Note:
Note: This/these is/are to be
mounted only if you want to use the
hood in the recirculation mode.
In addition, check whether an electric
connection to the mains is available
near the installation area of the hood
(and also in all accessible areas with
the hood mounted), and if it is
possible to connect a fumes
discharge device to the outside.
(Extraction mode only).
Choose the exhaust hole to use:Choose the exhaust hole to use:
Choose the exhaust hole to use:Choose the exhaust hole to use:
Choose the exhaust hole to use:
Only rOnly r
Only rOnly r
Only r
ecirecir
ecirecir
ecir
culation mode: use ONLculation mode: use ONL
culation mode: use ONLculation mode: use ONL
culation mode: use ONL
YY
YY
Y
the top exhaust hole.the top exhaust hole.
the top exhaust hole.the top exhaust hole.
the top exhaust hole.
Once the installation is completed,
check that this is not obstructed and
that there is sufficient space so that
the purified fumes and steam can
return easily into the kitchen.
Press with decision to take away the
prefractured part (Top or Rear) that
closes the exhaust hole and remove
it.
Install the connection ring on the
open discharge outlet (bayonet
attachment - (Extraction mode only)
or the deflector. (recirculation mode
only).
Ø 2,9 x 9,5
Ø 2,9 x 9,5
Top
Top
Rear
Top
Rear
electrolux electrolux
electrolux electrolux
electrolux installation
1717
1717
17
GB
Check that the side wall units
between which to install the hood are
sufficiently heavy for installing the
hood.
Otherwise mount the brackets to use
as additional supports:
a. a.
a. a.
a. Insert each bracket from the rear
inside the hood through the opposite
slots
..
..
.
b. b.
b. b.
b. Fix the brackets with the screws
and threaded bushes.
Screw the headless screws halfway.
They will serve to adjust the position
of the hood at the moment of
installation.
Note: Note:
Note: Note:
Note: the position of the brackets
can be adjusted during installation,
suitably loosening and retightening
the screws that fix them to the hood.
Ø 5x18
Ø 5x10
Rear view
1818
1818
18
electr electr
electr electr
electr
oluxolux
oluxolux
olux installation
GB
Fixing a furFixing a fur
Fixing a furFixing a fur
Fixing a fur
niturnitur
niturnitur
nitur
e door to the visore door to the visor
e door to the visore door to the visor
e door to the visor
Remove the extraction grill or the
metal grease filter.
Remove the visor (freeing the locking
releases
I I
I I
I).
Apply the drill holes diagram
N3N3
N3N3
N3 on
the rear of the furniture door (
JJ
JJ
J-the
arrow on the diagram should face the
upper border of the furniture door),
perform blind holes as indicated (
KK
KK
K).
Place the visor over the furniture door
and affix with 8 screws (
LL
LL
L).
Refit the cover on the cooker hood
firstly in the upper track (
Fig. 12-M1Fig. 12-M1
Fig. 12-M1Fig. 12-M1
Fig. 12-M1),
then in the lower track (
Fig. 12-M2Fig. 12-M2
Fig. 12-M2Fig. 12-M2
Fig. 12-M2).
II
II
I
II
II
I
Ø 2,5mm x 6mm max
6mm
N3
Ø 4,5 x 13
JJ
JJ
J
LL
LL
L
KK
KK
K
M1M1
M1M1
M1
M2M2
M2M2
M2
M2M2
M2M2
M2
M1M1
M1M1
M1
electrolux electrolux
electrolux electrolux
electrolux installation
1919
1919
19
GB
Fixing the hoodFixing the hood
Fixing the hoodFixing the hood
Fixing the hood
Use template
N2N2
N2N2
N2. Position the
template on the front edges of the
wall unit (right wall unit, B side) – (left
wall unit, C side)
WITHOUTWITHOUT
WITHOUTWITHOUT
WITHOUT
CONSIDERING THE THICKNESSCONSIDERING THE THICKNESS
CONSIDERING THE THICKNESSCONSIDERING THE THICKNESS
CONSIDERING THE THICKNESS
OF THE FRONT WOF THE FRONT W
OF THE FRONT WOF THE FRONT W
OF THE FRONT W
ALL UNITALL UNIT
ALL UNITALL UNIT
ALL UNIT
DOORS, DOORS,
DOORS, DOORS,
DOORS, and make the holes as
indicated.
If the side wall units arIf the side wall units ar
If the side wall units arIf the side wall units ar
If the side wall units ar
e not heavye not heavy
e not heavye not heavy
e not heavy
enough ONLenough ONL
enough ONLenough ONL
enough ONL
YY
YY
Y
::
::
:
a.a.
a.a.
a. If necessary, fix the hood to the
wall, putting template
N1 N1
N1 N1
N1 on the
wall so its upper edge coincides
with the upper edge of template
N2.N2.
N2.N2.
N2.
b.b.
b.b.
b. Make the holes as indicated.
Fix 2 hooks
R R
R R
R to the wall with
screws and dowels.
c.c.
c.c.
c. Hang the hood onto the hooks
and adjust the position of the
hood with headless screws
S1S1
S1S1
S1
and adjusting the position of the
hooking brackets with screws
S2S2
S2S2
S2.
Fix the hood to the side wall units
with 4 screws
PP
PP
P.
N2
B
N2
C
N1
N1
RR
Ø 5 x 45
S1
S2
P
P
Ø 4,5 x 16
2020
2020
20
electr electr
electr electr
electr
oluxolux
oluxolux
olux installation
GB
Mount the lower corner
Q Q
Q Q
Q (*) to the
hood with two screws and plastic
washers
TT
TT
T. They will serve to cover
possible spaces between the rear of
the hood and the wall.
Fit the charcoal filter/s (Recirculation
mode ONLY).
Fit the grill or the metal grease filters.
Q
T
T
Ø 3,5 x 9,5
Q
SIDE VIEW
FRONT VIEW
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Electrolux EFI60021S Manuel utilisateur

Catégorie
Hottes
Taper
Manuel utilisateur

dans d''autres langues