GE ZFSB27DYSS Le manuel du propriétaire

Catégorie
Congélateurs
Taper
Le manuel du propriétaire
GE Monogram
®
Use and Care Guide
Stainless Steel
Refrigerator
General Electric Company
Louisville, KY 40225
Monogram.
TM
Pub. No. 49-6918
Part No. 162D9618P002
2-97 CG
Consumer Information
Stainless Steel Refrigerator
2
Introduction
Your new Monogram refrigerator makes an eloquent statement of style, convenience and kitchen
planning flexibility. Whether you chose it for its purity of design, practical storage arrangements
or assiduous attention to detail—or for all of these reasons—you’ll find that your Monogram
refrigerator’s superior blend of form and function will delight you for years to come.
The information on the following pages will help you operate and maintain your
refrigerator properly.
For more information, please refer to the following publication:
Installation Instructions 49-6919
This can be obtained from a GE Monogram dealer. For a listing of dealers—or if you have other
questions—please call the GE Answer Center
®
(800.626.2000).
Contents
Consumer Services
Important Phone Numbers . . . . . . . . . . . . . . . .28
Model and Serial Numbers . . . . . . . . . . . . . . . . . .2
Problem Solver . . . . . . . . . . . . . . . . . . . . . . . .24–27
Product Registration . . . . . . . . . . . . . . . . . . . . . . .3
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warranty for Canadian Customers . . . . . . . . . . 29
Warranty for U.S. Customers . . . . . . . . . . . . . . .30
Care and Cleaning
Behind Refrigerator . . . . . . . . . . . . . . . . . . . . . . .18
Cleaning—Outside and Inside . . . . . . . . . . . . . .17
Drawer Removal . . . . . . . . . . . . . . . . . . . . . . . . . .18
Light Bulb Replacement . . . . . . . . . . . . . . . . . . 19
Under Refrigerator . . . . . . . . . . . . . . . . . . . . . . .18
Operating Instructions
Automatic Icemaker and Dispenser . . . . . . .7–11
Food Storage Suggestions . . . . . . . . . . . . . . .12, 13
Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 16
Storage Drawers . . . . . . . . . . . . . . . . . . . . . . . . . .14
Temperature Controls . . . . . . . . . . . . . . . . . . . . . .5
Preparation
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Leveling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Moving and Vacation . . . . . . . . . . . . . . . . . . . . . .20
Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Water Supply to Icemaker . . . . . . . . . . . . . . . . . .21
Before
using
your
refrigerator
Read this guide carefully. It is intended to
help you operate and maintain your new
refrigerator properly.
Keep it handy for answers to your questions.
If you don’t understand something or need
more help:
In the United States call:
GE Answer Center
®
800.626.2000
24 hours a day, 7 days a week
In Canada, write:
Manager, Consumer Relations
5800 Keaton Crescent
Mississauga, Ontario
Canada L5R 3K2
3
Write
down the
model &
serial
numbers
You’ll see them on a label on the wall beside
the top drawer or at the bottom, just inside the
fresh food compartment door.
These numbers are also on the Consumer
Product Ownership Registration Card
included with this guide.
Before sending in this card, please write these
numbers here:
Model Number
Serial Number
Use these numbers in any correspondence or
service calls concerning your refrigerator.
If you
received a
damaged
refrigerator
Immediately contact the dealer (or builder)
that sold you the refrigerator.
Save time
& money
Before you request service, check the Problem
Solver in the back of this guide.
It lists causes of minor operating problems that
you can correct yourself.
If you
need
service
To obtain service, see the Consumer Services
page in the back of this guide.
We’re proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are 3 steps to
follow for further help.
For Customers in the United States:
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details—including your phone number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
FINALLY, if your problem is still not
resolved, write:
Major Appliance Consumer
Action Program
20 North Wacker Drive
Chicago, IL 60606
For Customers in Canada:
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases this will solve the problem.
NEXT, if you are still not pleased, write all the
details—including your phone number—to:
Manager, Consumer Relations
5800 Keaton Crescent
Mississauga, Ontario
Canada L5R 3K2
4
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING—When using this appliance,
always exercise basic safety precautions,
including the following:
Use this appliance only for its intended
purpose as described in this Use and
Care Guide.
This refrigerator must be properly installed
in accordance with the Installation
Instructions before it is used.
Never unplug your refrigerator by pulling on
the power cord. Always grip plug firmly and
pull straight out from the outlet.
Repair or replace immediately all electric
service cords that have become frayed or
otherwise damaged. Do not use a cord that
shows cracks or abrasion damage along its
length or at either the plug or connector end.
When moving your refrigerator away from
the wall, be careful not to roll over or damage
the power cord.
Do not allow children to climb, stand or hang
on the shelves in the refrigerator. They could
damage the refrigerator and seriously injure
themselves.
If your old refrigerator is still around the
house but not in use, be sure to remove the
doors. This will reduce the possibility of
danger to children.
After your refrigerator is in operation, do
not touch the cold surfaces in the freezer
compartment, particularly when hands are
damp or wet. Skin may adhere to these
extremely cold surfaces.
If your refrigerator has an automatic
icemaker, avoid contact with the moving
parts of the ejector mechanism, or with the
heating element that releases the cubes. Do
not place fingers or hands on the automatic
icemaking mechanism while the refrigerator
is plugged in.
Unplug your refrigerator before cleaning
and making repairs. NOTE: We strongly
recommend that any servicing be performed
by a qualified individual.
Before replacing a burned-out light bulb, the
refrigerator should be unplugged in order to
avoid contact with a live wire filament. (A
burned-out light bulb may break when being
replaced.) NOTE: Turning control to OFF
position does not remove power to the light
circuit.
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance.
SAVE THESE INSTRUCTIONS
Operating Instructions
Stainless Steel Refrigerator
5
A B C D E
Freezer Control
C is Initial Setting
E is Coldest
OFF 13579
Set the
temperature
controls
(appearance
may vary)
The temperature controls let you regulate the
temperature in the fresh food and freezer
compartments.
At first, set the Fresh Food control at “5” and
the Freezer control at “C.”
Allow 24 hours for the temperature to stabilize,
whether you are setting the controls for the first
time or adjusting them later. Then, if you want
colder or warmer temperatures in either
compartment, adjust the controls one step at a
time.
NOTE: Moving the Fresh Food control to OFF
turns off cooling in both compartments—fresh
food and freezer—but does not shut off power to
the refrigerator.
How to test
temperatures
Use the milk test for the fresh food
compartment. Place a container of milk on the
top shelf in the fresh food compartment.
Check it a day later. If the milk is too warm or
too cold, adjust the temperature controls.
Use the ice cream test for the freezer
compartment. Place a container of ice cream in
the center of the freezer compartment. Check
it after a day. If it’s too hard or too soft, adjust
the temperature controls.
Always allow 24 hours for the refrigerator to
reach the temperature you set.
Automatic
energy saver
system
You won’t find an “energy saver” switch on this
refrigerator.
Warm liquid from the refrigerator’s condenser
is automatically circulated around the front
edge of the freezer compartment to help keep
moisture from forming on the outside of the
refrigerator during humid weather.
Many refrigerators use special electric heaters.
This refrigerator needs none. That’s why there is
no “energy saver” switch…there’s no need for it.
Operating Instructions
Stainless Steel Refrigerator
6
No
defrosting
It is not necessary to defrost the freezer or
fresh food compartments. Your refrigerator
is designed and equipped to defrost itself
automatically.
If you turn
your household
thermostat
below 60°F.
(16°C.) at
night…
…you may want to move the freezer control one
step colder. Cooler temperatures in the house
may cause the compressor to operate less
frequently, thus allowing the freezer
compartment to warm somewhat. To protect
your frozen food supply, leave the freezer
setting at this colder setting for the entire winter
or for as long as you keep your thermostat
turned down.
Moving the freezer control to colder setting
should have no effect on your fresh food
compartment. However, if freezing occurs,
move the fresh food control one step warmer.
When you stop turning the thermostat down,
turn the refrigerator’s controls back to their
regular settings.
Automatic Icemaker & Dispenser (on some models)
Stainless Steel Refrigerator
7
How they
work
The automatic icemaker makes ice continually.
The dispenser dispenses water, ice cubes or
crushed ice through the freezer compartment
door. Here’s how they work.
Water flows from the household supply
through a
1 dual solenoid valve to the
2 water tubing and to the
3 automatic icemaker as needed.
Water is frozen in the
4 cube mold and ejected into the
5 storage bin where a motor-powered auger
moves cubes forward.
Cubes fall through the chute in the door when
the dispenser pad is pressed.
When CRUSHED is selected (on some models),
a baffle channels cubes through the crusher and
crushed ice falls through a chute into the glass.
When WATER is selected (on some models),
water flows through the
6 tubing in the door and is dispensed when the
dispenser pad is pressed.
7 A light switch (on some models) turns the
night light in the dispenser on or off.
The light also comes on when the dispenser pad
is pressed.
The light in the dispenser should be replaced
with a 7 watt maximum bulb when it burns out.
3
4
5
2
1
7
6
Automatic Icemaker & Dispenser
Stainless Steel Refrigerator
8
Important
facts about
your ice
& water
dispenser
If this is your first icemaker you’ll hear
occasional sounds that may be unfamiliar.
These are normal icemaking sounds and are
not cause for concern.
Your icemaker will produce 8 cubes per
cycle—approximately 120 cubes in a 24-hour
period—depending on freezer compartment
temperature, room temperature, number of
door openings and other use conditions.
Intermittent dispensing of ice is normal. If
ice flow interruption is more than brief, ice
clump(s) may be the cause and should be
removed following instructions in this
section.
Avoid overfilling glasses with ice and using
narrow or extra-tall glasses. This can jam the
chute or cause the door in the chute to
freeze shut. Periodically open the freezer
compartment door and look down into the
chute. If ice is blocking the chute, poke it
through with a wooden spoon.
To help keep bits of ice from being sprayed
beyond the glass, place the glass close to the
ice chute—but not so close that it blocks
outcoming ice.
Fill glasses with ice before adding soda or
other beverage mixes.
Beverages and foods should not be quick-
chilled in the ice storage bin. Cans, bottles or
food packages in the storage bin may cause
the icemaker or auger to jam.
Do not add ice from trays or bags to the
storage bin. It may not crush or dispense well.
WATER CRUSHED CUBEDICE
LIGHT
OFF ON
Before
using your
icemaker &
dispenser
If you use your refrigerator before the water
connection is made, raise the ice access door
and make sure the icemaker feeler arm is in the
STOP (up) position. When the water supply has
been connected to the icemaker, move the
feeler arm to ON (down) position.
At first there will be a delay before water is
dispensed and ice is made.
The ice cube mold will automatically fill with
water AFTER cooling to freezer temperatures.
The first cubes normally freeze after several
hours.
NOTE: With a newly-installed refrigerator,
allow about 24 hours for the freezer
compartment to get cold enough to make ice.
On models with a water dispenser, if no
water is dispensed when the refrigerator is first
installed, there may be air in the water line
system. Press the dispenser pad for at least two
minutes to remove trapped air from the water
line and to fill the water system.
Feeler arm in
STOP (up) position
Push the dispenser
pad until the water
line is filled.
Feeler arm in
ON (down) position
9
Once your
icemaker &
dispenser
are in
operation
Throw away the first few batches of ice cubes
(16 or 24 cubes). This will flush away any
impurities in the water line. Do the same thing
after vacations or extended periods when ice
isn’t used.
On models with a water dispenser, pour the
first 6 glassfuls of water in the kitchen sink. The
first water through the system picks up a slight
‘‘plastic’’ taste from the water tubing.
To make sure the bin fills with ice, level the
cubes occasionally. When cubes fall into the
bin they may pile up close to the icemaker and
push the feeler arm to the STOP (up) position
before the bin gets full. Keeping the cubes
level allows the icemaker to fill the bin.
WATER CRUSHED CUBEDICE
LIGHT
OFF ON
To dispense
ice & water
Select CUBES, CRUSHED ICE (on some
models) or WATER (on some models).
Grip the glass or other container near the rim
and press the rim against the center of the
dispenser pad.
Dispenser Pad
When
dispensing
ice
Some crushed ice may be dispensed even
though you selected CUBES. This happens
occasionally when a few cubes get channeled to
the crusher.
Sometimes a mound of snow will form on the
door in the ice chute. This condition is normal,
and usually occurs when you have dispensed
crushed ice repeatedly. The snow will
eventually evaporate.
Sometimes crushed ice will spray beyond the
glass. To avoid this, hold the glass up close to
the chute.
CAUTION: Never put fingers or other objects
into the dispenser opening.
When
dispensing
water
(on some models)
The first glass of water dispensed may be
warmer than the following ones. This is
normal.
Dispensed water is cool, not iced. For colder
water, simply add crushed ice or cubes before
dispensing water.
Automatic Icemaker & Dispenser
Stainless Steel Refrigerator
WATER CRUSHED CUBEDICE LIGHT
OFF ON
To stop
dispensing
Release pressure from the dispenser pad and
wait a few seconds to catch the last bits of ice or
drops of water.
There may be some dripping after dispensing
crushed ice or water. If there is a lot of dripping,
the spill should be wiped dry right away.
Do not pour water in the spill shelf because it is
not self draining—pour it in the kitchen sink.
The shelf and its grille should be cleaned
regularly according to Care and Cleaning
instructions. The grille is easily removed by
pressing on the back right corner.
Press here to
remove grille.
If ice clumps
form in the
storage bin
The icemaker ejects cubes in groups of 8, and
it is normal for several cubes to be joined
together. However, if you don’t use the ice very
often, ice clumps may form in the storage bin
and can clog the dispenser.
If this happens:
Remove the storage bin from the freezer.
Break up ice clumps with your hands. Throw
away any clumps that you can’t break up.
Replace the bin before the remaining cubes
melt and fuse together.
To remove
ice storage
bin
Lift the left corner to free the bin from the
shelf. Pull the bin straight out while supporting
it at front and back.
To replace
ice storage
bin
Slide the bin back until the tab on the bin locks
into the slot in the shelf.
If the bin does not go all the way back, remove it
and turn the drive mechanism 1/4 turn. Then
push the bin back again until the tab on the
bin locks into the slot in the shelf.
10
Drive
Mechanism
Rotate
11
If ice is
not used
often
‘‘Old’’ ice cubes will become cloudy and taste
stale. Empty ice storage bin periodically and
wash it in lukewarm water. Be sure to allow
storage bin to cool before replacing it—
otherwise ice cubes will stick to the metal auger.
Move feeler
arm to
STOP (up)
position
when…
Home water supply is to be turned off for
several hours.
Ice storage bin is to be removed for a period
of time.
Going away on vacation, at which time you
should also turn off the valve in the water
supply line to your refrigerator.
Moving the fresh food control to the OFF
position.
Accessories
Water Supply Kit
A kit containing copper tubing, shutoff valve
fittings and instructions needed to connect the
icemaker to your cold water line is available at
extra cost. See Preparation section.
Water Filter Accessory
The water filter is an option at extra cost
and is available from your dealer. Specify
WR97X0214. It has complete installation
instructions and installs in minutes on 1/4
O.D. copper water line.
Food Storage Suggestions
Stainless Steel Refrigerator
12
Suggested
storage
times for
meat &
poultry*
Eating quality DAYS IN MONTHS IN
drops after REFRIGERATOR FREEZER
time shown AT 35° TO 40°F. AT 0°F.
(2° TO 4°C.) (-18°C.)
Fresh Meats
Roasts (Beef & Lamb)..........3 to 5 ......................6 to 12
Roasts (Pork & Veal) ..........3 to 5 ......................4 to 8
Steaks (Beef)........................3 to 5 ......................6 to 12
Chops (Lamb) ....................3 to 5 ......................6 to 9
Chops (Pork) ......................3 to 5 ......................3 to 4
Ground & Stew Meats ..........1 to 2 ......................3 to 4
Variety Meats ......................1 to 2 ......................3 to 4
Sausage (Pork) ....................1 to 2 ......................1 to 2
Processed Meats
Bacon ......................................7 ............................1
Frankfurters ............................7 ..........................1/2
Ham (Whole)..........................7..........................1 to 2
Ham (Half) ..........................3 to 5 ......................1 to 2
Ham (Slices)............................3..........................1 to 2
Luncheon Meats ..................3 to 5....................Freezing
Sausage (Smoked) ..................7 ..........................not
Sausage (Dry & Semi-Dry) ..14 to 21 ..........recommended.
Cooked Meats
Cooked Meats & Meat Dishes..3 to 4 ........................2 to 3
Gravy & Meat Broth ................1 to 2 ........................2 to 3
Eating quality DAYS IN MONTHS IN
drops after REFRIGERATOR FREEZER
time shown AT 35° TO 40°F. AT 0°F.
(2° TO 4°C.) (-18°C.)
Fresh Poultry
Chicken & Turkey (Whole) ..1 to 2 ........................12
Chicken (Pieces)..................1 to 2..........................9
Turkey (Pieces)....................1 to 2..........................6
Duck & Goose (Whole)........1 to 2..........................6
Giblets..................................1 to 2..........................3
Cooked Poultry
Pieces (Covered with Broth) ..1 to 2..........................6
Pieces (Not Covered) ..........3 to 4..........................1
Cooked Poultry Dishes ........3 to 4 ......................4 to 6
Fried Chicken ......................3 to 4..........................4
(Other than meats & poultry) FREEZER
Most fruits and vegetables....................................8–12 months
Lean fish ................................................................6–8 months
Fatty fish, rolls and breads, soups,
stew, casseroles ....................................................2–3 months
Cakes, pies, sandwiches, leftovers (cooked),
ice cream (original carton) ..............................1 month max.
Meats, fish and poultry purchased from the
store vary in quality and age; consequently,
safe storage time in your refrigerator will vary.
For meat and poultry information, call the U.S.
Dept. of Agriculture at 800-535-4555.
*U.S. Department of Agriculture
Fresh food
storage tips
To store vegetables:
Use the vegetable drawers—they have been
designed to preserve the natural moisture
and freshness of produce.
Covering vegetables with a moist towel helps
maintain crispness.
As a further aid to freshness, prepackaged
vegetables can be stored in their original
wrapping.
Unfrozen meats, fish, and poultry:
Always remove store wrappings.
Rewrap in foil, plastic wrap or wax paper and
refrigerate immediately.
Cheese:
Wrap well with wax paper or aluminum foil,
or put in a plastic bag.
Carefully wrap to expel air and help
prevent mold.
Store prepackaged cheese in its own
wrapping if you wish.
Tips on
freezing
foods
There are 3 essential requirements for efficient
home freezing.
1. Initial quality. Freeze only top-quality foods.
Freezing retains quality and flavor; it cannot
improve quality.
2. Speed. The quicker fruits and vegetables are
frozen after picking, the better the frozen
product will be. You’ll save time, too, with
less culling and sorting to do.
3. Proper packaging. Use food wraps designed
especially for freezing.
To freeze meat, fish and poultry, wrap well in
freezer-weight foil (or other heavy-duty
wrapping material), forming it carefully to the
shape of the contents. This expels air. Fold and
crimp ends of the package to provide a good,
lasting seal. Don’t refreeze meat that has been
completely thawed; meat, whether raw or
cooked, can be frozen successfully only once.
Fine-quality ice cream, with high cream
content, will normally require slightly lower
temperatures than more “airy” already-
packaged brands with low cream content.
It will be necessary to experiment to
determine the freezer compartment location
and temperature control setting to keep your
ice cream at the right serving temperature.
The rear of the freezer compartment is
slightly colder than the front.
New techniques are constantly being developed.
Consult the County Extension Service or your local
Utility Company for the latest information on freezing
and storing foods.
13
Storage Drawers
Stainless Steel Refrigerator
14
Convertible
drawer
The Convertible Drawer has its own cold air
duct to allow a stream of cold air from the
freezer compartment to flow around
the drawer.
The variable temperature control regulates the
air flow from the freezer compartment.
Set control lever down to the coldest setting to
store fresh meats. If the lever is left in the
coldest position for a long period of time, some
frost may form on the inside of the drawer.
Set control lever up to convert the drawer to
normal refrigerator temperature and provide
extra vegetable storage space. Cold air duct is
turned off. Variable settings between these
extremes can be selected.
Sealed
snack pack
The sealed Snack Pack—and shelf to which it is
attached—can be relocated within the Fresh
Food compartment. The sealed drawer retains
sufficient humidity for convenient storage of
lunch meats, cheese, hors d’oeuvres, spreads
and snacks.
Normal Setting
Coldest Setting
Fruit &
vegetable
drawers
Storage time will depend upon the type of food
and its condition when placed in the drawer.
Excess water which may accumulate in the
bottom of the drawer should be poured out and
the drawer wiped dry.
The drawer is partially sealed by gaskets. Always
push the drawer all the way in.
As in any refrigerated storage area, it is
recommended that odorous foods be stored
wrapped.
Adjustable
humidity
drawers
These drawers have individual, adjustable
humidity controls that let you regulate the
amount of moisture retained in foods.
Slide the control all the way to the setting
and the drawer provides high humidity
recommended for most vegetables.
Slide the control all the way to the setting
to provide lower humidity levels recommended
for most fruits.
Shelves
Stainless Steel Refrigerator
15
How to
rearrange
your shelves
Shelves in the fresh food compartment are
adjustable, enabling you to make efficient
shelf arrangements to fit your family’s food
storage needs.
To remove shelves:
Tilt the shelf up at front, then lift it up and out
of the tracks on the rear wall of the refrigerator.
To relocate shelves:
Select desired shelf height. With shelf front
raised slightly, engage the top hooks in the
tracks at the rear of the cabinet. Then lower the
front of the shelf until it locks into position.
2 Lift up
and out
1 Engage
top hook
1 Tilt up
2 Lower to
lock into
place
Quick space
shelf
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
Slide-out
spillproof shelf
The slide-out shelf allows you to reach items
stored behind others. The special edges are
designed to help prevent spills from dripping to
lower shelves. Make sure you push the shelves
all the way back in before you close the door.
Removable
wine rack
The wine rack is designed to hold a bottle on its
side. A good location for the wine rack is the
Quick Space Shelf.
Shelves
Stainless Steel Refrigerator
16
Freezer baskets
Wire slide-out freezer baskets can be pulled out
for easy access to frozen foods.
Bins on
fresh food
compartment
door
(on some models)
Adjustable bins can easily be carried from
refrigerator to work area.
To remove:
Lift bin straight up until mounting hooks
disengage.
To replace or relocate:
Select desired shelf height, engage bin’s hook
in slots on the tracks of the door, and push in.
Bin will lock in place.
The divider (on some models) helps prevent
tipping, spilling or sliding of small items stored
on the door shelf. Place index finger and
middle finger on either side of the divider near
the front and simply move it back and forth to
fit your needs.
Divider
Multi-position
shelves in
freezer
compartment
(on some models)
Shelf supports at various levels in the freezer
compartment let you reposition the shelves at
your convenience.
Care and Cleaning
Stainless Steel Refrigerator
17
Cleaning
outside
The water and ice dispenser spill shelf (on
some models) should be wiped dry immediately
to prevent spotting. Water left on the shelf may
leave deposits that you can remove by soaking
with undiluted vinegar. You can also use a paste
of non-precipitating water softener (such as
Calgon brand) and water, or 1 teaspoon (5 ml)
of citric acid powder per pint (500 ml) of hot
tap water. Soak until the deposit disappears or
becomes loose enough to rinse away. Usually 30
minutes soaking time is adequate. Avoid using
wax on the spill shelf and trim.
The dispenser pad can be cleaned by using a
warm water and baking soda solution—about a
tablespoon (15 ml) of baking soda to a quart
(1 L) of water. Rinse thoroughly with water and
wipe dry.
The stainless steel panels and door handles can
be cleaned with a commercially available
stainless steel cleaner using a clean, soft cloth.
Do not use appliance wax or polish on the
stainless steel.
Cleaning
inside
Inside the fresh food and freezer
compartments should be cleaned at least once
a year. Unplug the refrigerator before
cleaning. If this is not practical, wring excess
moisture out of sponge or cloth when cleaning
around switches, lights or controls.
Use warm water and baking soda solution—
about a tablespoon (15 ml) of baking soda to a
quart (1 L) of water. This both cleans and
neutralizes odors. Rinse thoroughly with water
and wipe dry.
Other parts of the refrigerator—including door
gaskets, meat and vegetable drawers, ice
storage bin and all plastic parts—can be
cleaned the same way. After cleaning door
gaskets, apply a thin layer of petroleum jelly to
the door gaskets at the hinge side. This helps
keep the gaskets from sticking and bending out
of shape. Do not use cleansing powders or
other abrasive cleaners.
Avoid cleaning cold glass shelves with hot
water because the extreme temperature
difference may cause them to break.
To help prevent odors, leave an open box of
baking soda in the rear of the refrigerator, on
the top shelf. Change the box every 3 months.
An open box of baking soda in the freezer will
absorb stale freezer odors.
Do not wash any plastic parts from your
refrigerator in your automatic dishwasher.
Drain opening in freezer
compartment. During
yearly cleaning, remove
bottom freezer basket and
flush a solution of baking
soda—1 teaspoon (5 ml) and
2 cups (500 ml) of hot (not
boiling) water—through the
drain line with the help of a meat baster.
This will help eliminate odor and reduce the
likelihood of a clogged drain line. If drain
becomes clogged, use a meat baster and
baking-soda-and-water solution to force the
clog through the drain line.
Care and Cleaning
Stainless Steel Refrigerator
18
Under
refrigerator
For most efficient operation, you need to keep
the area under the refrigerator clean. Remove
the base grille and either sweep away or vacuum
up dust that is readily accessible. For best
results, use a brush specially designed for this
purpose. It is available at most appliance parts
stores. This easy cleaning operation should be
done at least once a year.
Clean the condenser
coils at least once a year.
Behind
refrigerator
Care should be taken in moving your
refrigerator away from the wall. All types of
floor coverings can be damaged, particularly
cushioned coverings and those with embossed
surfaces. Pull the refrigerator straight out and
return it to position by pushing it straight in.
Moving your refrigerator in a side direction
may result in damage to your floor covering
or refrigerator.
When pushing the refrigerator back, make
sure you don’t roll over the power cord or
icemaker supply line (on some models).
Drawer
removal
Drawers will stop before coming all the way out
of the refrigerator to help prevent contents
from spilling onto the floor. Drawers can easily
be removed by tilting up slightly and pulling
past the “stop” location.
Remove the door bins from the fresh food door
before removing the drawer.
To remove the shelf above the top drawer, first
remove the top drawer and any food on the
shelf. Then tilt the shelf up at the front and lift
it up and out of the tracks.
To replace the shelf, raise the shelf front
slightly and place the top hooks in the lowest
large track slots. Then lower the front of the
shelf until it is level.
When replacing the drawers, make sure you
slide them through both drawer guides on the
right side.
To remove the drawers when the fresh food
compartment door cannot be opened fully you
need to roll the refrigerator forward until the
door can be fully opened. In some cases this will
require moving the refrigerator to the left as
you roll it out.
Drawer Guides
19
Light bulb
replacement
Fresh Food Compartment–Upper Light
1 Unplug refrigerator.
2 Pull off the temperature control knobs.
3 Pull bottom of the light shield down and
forward, then rotate the top up and off.
After replacing with same size bulb, reinstall the
light shield.
Fresh Food Compartment–Two Lower Lights
(on some models)
These lights are located behind the top drawer.
1 Unplug the refrigerator and remove the top
drawer and cover.
2 Grasp the bottom edge of the shield and pull
forward and up to free its bottom edge.
3 After replacing with the same size appliance
bulb, replace the shield.
Freezer Compartment
1 Unplug the refrigerator.
2 Remove the shelf just below light shield.
(The shelf will be easier to remove if it is
emptied first.)
3 Pull the light shield toward you to reach
the bulb.
After replacing with same size bulb, reinstall
shelf and plug the refrigerator back in.
Preparation
Stainless Steel Refrigerator
20
Preparing
for vacation
For shorter vacations, remove perishable foods
and leave controls at regular settings. However,
if room temperature is expected to drop below
60°F. (16°C.), follow same instructions in
Temperature Control section.
For long vacations or absences, remove food
and shut off power to refrigerator. Move the
Fresh Food control to OFF position and clean
interior with baking soda solution of 1
tablespoon (15 ml) of soda to 1 quart (1 L) of
water. Wipe dry. To prevent odors, leave open
box of soda in refrigerator. Leave doors open.
Move the icemaker (on some models) feeler
arm to STOP (up) position and be sure to shut
off water supply to the refrigerator.
Preparing
to move
Disconnect power cord from wall outlet,
remove all food, and clean and dry the
interior.
Secure all loose items such as grille, shelves
and storage pans by taping them securely in
place to prevent damage.
Be sure refrigerator stays in upright position
during actual moving and in van. Refrigerator
must be secured in van to prevent movement.
Protect outside of refrigerator with blanket.
Refrigerator
location
Do not install refrigerator where temperature
will be below 60°F. (16°C.) because it will not
run often enough to maintain proper
temperatures.
Do install it on a floor strong enough to
support a fully loaded refrigerator.
Clearances
Allow the following clearances for ease of
installation, proper air circulation, plumbing
and electrical connections.
Sides . . . . . . . . . . . . . . . . . . . . . .5/8 (15 mm)
Top . . . . . . . . . . . . . . . . . . . . . . .1 (25 mm)
Back . . . . . . . . . . . . . . . . . . . . . .1 (25 mm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

GE ZFSB27DYSS Le manuel du propriétaire

Catégorie
Congélateurs
Taper
Le manuel du propriétaire

dans d''autres langues