Yamaha PSR-E433 Le manuel du propriétaire

Catégorie
Claviers
Taper
Le manuel du propriétaire
EN
Owners Manual
DIGITAL KEYBOARD
Setting UpReferenceAppendix Quick Guide
2
PSR-E433 Owner’s Manual
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.
WARNING: Do not place this product in a position where anyone
could walk on, trip over, or roll anything over power or connecting
cords of any kind. The use of an extension cord is not recommended!
If you must use an extension cord, the minimum wire size for a 25’
cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the
larger the current handling capacity. For longer extension cords, con-
sult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to change or
modify any of the specifications without notice or obligation to update
existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound levels
that could cause permanent hearing loss. DO NOT operate for long
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be dealer
assembled or installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured BEFORE
using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are
not covered by the manufacturer’s warranty, and are therefore the
owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating and
battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as
regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model
number, serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP (bottom)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class "B" digital
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions found in
the users manual, may cause interference harmful to the operation
of other electronic devices. Compliance with FCC regulations does
not guarantee that interference will not occur in all installations. If
this product is found to be the source of interference, which can be
determined by turning the unit "OFF" and "ON", please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division,
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
3
PSR-E433 Owner’s Manual
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge
som den ar ansluten till vägguttaget, även om själva apparaten
har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE
afbrudt, sålænge netledningen sidder i en stikkontakt, som er
tændt — også selvom der er slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita
koko laitetta verkosta.
(standby)
The name plate of this product may be found on the bottom of
the unit. The serial number of this product may be found on or
near the name plate. You should note this serial number in the
space provided below and retain this manual as a permanent
record of your purchase to aid identification in the event of
theft.
Model No.
Serial No.
(bottom)
Entsorgung leerer Batterien
(nur innerhalb Deutschlands)
Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte
Batterien oder Akkumulatoren dürfen nicht in den Hausmüll.
Sie können bei einer Sammelstelle für Altbatterien bzw.
Sondermüll abgegeben werden. Informieren Sie sich bei Ihrer
Kommune.
(battery)
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and elec-
tronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable col-
lection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise arise from inappropriate
waste handling.
For more information about collection and recycling of old products and batteries, please contact your local munici-
pality, your waste disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further informa-
tion.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set
by the Directive for the chemical involved.
(weee_battery_eu_en)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park,
Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Keyboard
Model Name : PSR-E433
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See user manual instructions if interference to radio reception is
suspected.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
4
PSR-E433 Owner’s Manual
Quick Guide Reference AppendixSetting Up
Table of Contents
Special Features ..............................................................5
Compatible Format and Functions ...................................8
About the Manuals ...........................................................9
Included Accessories .......................................................9
Setting Up
Panel Controls and Terminals 10
Setting Up 12
Power Requirements......................................................12
Connecting Headphones or External Audio Equipment
...13
Connecting a Footswitch to the SUSTAIN jack..............13
Basic Operations 14
Turning the Power On/Off ..............................................14
Auto Power Off Function ................................................14
Selecting Operations......................................................14
Display Items 15
Quick Guide
Try Playing a Variety of Instrument Voices 16
Selecting a Main Voice...................................................16
Playing the “Grand Piano”..............................................16
Layering a Dual Voice ....................................................16
Playing a Split Voice in the Left Hand area....................17
Using the Metronome.....................................................18
Adding Harmony ............................................................19
Creating Arpeggios 20
Triggering the Arpeggio..................................................20
Changing the Arpeggio Type .........................................20
Creating Original Sounds via the Knobs 21
Selecting a Knob Effect Combination.............................21
Applying the Filter to the Main Voice..............................21
Playing Styles 22
Using the Music Database .............................................22
Playing with Patterns Like a DJ! 23
Playing Songs 24
Listening to a Demo Song..............................................24
Selecting and Playing Back a Song ...............................24
Song Fast Forward, Fast Reverse, and Pause ..............25
A-B Repeat.....................................................................25
Turning Each Track On/Off ............................................25
Using the Song Lesson Feature 26
Three Types of Song Lesson .........................................26
Practicing with Song Lesson ..........................................26
Making Practice Perfect—Repeat & Learn.....................27
Recording Your Performance 28
Track Structure of a Song. .............................................28
Quick Recording.............................................................28
Recording to a Specified Track ......................................29
Clearing a User Song.....................................................30
Clearing a Specified Track from a User Song................30
Memorizing Your Favorite Panel Settings 31
Memorizing Panel Settings to the Registration Memory
...31
Recalling Panel Settings from the Registration Memory
...31
Backup Parameters and Initialization 32
Backup Parameters........................................................32
Initialization ....................................................................32
Reference
Handy Performance Features 33
Selecting a Reverb Type................................................33
Selecting a Chorus Type................................................33
Pitch Controls—Transpose ............................................34
Pitch Controls—Tuning ..................................................34
Pitch Controls—the PITCH BEND wheel .......................34
Calling up Optimum Panel Settings ...............................34
Changing the Touch Sensitivity of the Keyboard ...........35
Selecting an EQ Setting for the Best Sound ..................35
Voice Settings 36
Selecting a Dual Voice...................................................36
Selecting a Split Voice ...................................................36
Voice Editing ..................................................................36
Parameters Assigned to the Knobs 37
Arpeggio Settings 39
Synchronizing an Arpeggio to Song/Style/Pattern
Playback—Arpeggio Quantize ...................................39
Holding the Arpeggio Playback via the Footswitch ........39
Styles (Auto Accompaniment) and Patterns 40
Style Variations—Sections.............................................40
Synchro Stop .................................................................41
Pattern Variations—Sections .........................................42
Changing the Tempo .....................................................42
Tap Start ........................................................................42
Adjusting the Volume of the Style or Pattern .................42
Setting the Split Point.....................................................43
Playing Chords Without Style Playback.........................43
Chord Types for Style Playback.....................................44
Looking Up Chords Using the Chord Dictionary ............45
Song Settings 46
BGM (Background Music) Playback ..............................46
Random Song Playback ................................................46
Tempo Setting of the Song ............................................47
Tap Start ........................................................................47
Song Volume .................................................................47
Melody Voice Setting of the Preset Song ......................47
The Functions 48
Basic Procedure in the Function Display .......................48
USB Flash Memory Operations 51
Connecting a USB Flash Memory..................................52
Formatting a USB Flash Memory...................................53
Saving User Data to a USB Flash Memory....................54
Saving a User Song as SMF to a USB Flash Memory...55
Loading User Data from a USB Flash Memory..............56
Loading a Style File .......................................................57
Deleting a User File in the USB Flash Memory..............58
Deleting a SMF File in the USB Flash Memory..............58
Exiting from a File Control display..................................59
Appendix
Troubleshooting ............................................................. 60
Specifications................................................................. 61
Index .............................................................................. 62
5
PSR-E433 Owner’s Manual
Setting Up
Special Features
Creating New Sounds
Page 21
By adjusting just two knobs you can add varying degrees of distortion, “sweet-
ness, or other characteristics to a sound to change it subtly or drastically. Param-
eters that can be assigned to the knobs include effect, filter, envelope generator
and more. You can create new sounds in real time!
Arpeggio Function
Page 20
Similar to the arpeggio functions provided on some synthesizers, this function
automatically produces arpeggios (broken chords) when you simply play the
appropriate notes on the keyboard. A variety of arpeggios can be produced by
changing your fingering or the arpeggio type.
Play a Variety of Instrument Voices
Page 16
The instrument voice that sounds when you play the keyboard can be changed to
violin, flute, harp, or any of an extensive range of voices. You can change the
mood of a song written for piano, for example, by using violin to play it instead.
Experience a whole new world of musical variety.
Play Along with Styles
Page 22
Want to play with full accompaniment? Try the auto-accompaniment Styles.
The accompaniment styles provide the equivalent of a full backing band cover-
ing a wide variety of styles from waltzes to 8-beat to euro-trance ... and much
more. Select a style that matches the music you want to play, or experiment with
new styles to expand your musical horizons.
Try playing like a DJ by using the Patterns!
Page 23
The Pattern function lets you perform like a DJ. The Track Control lets you
enjoy various instrument combinations, and the Knobs let you control the tempo
and create various sounds.
The appropriate panel settings for each Pattern are pre-programmed to Registra-
tion Memory. Refer to page 34.
044
EuTrance
6
PSR-E433 Owner’s Manual
Setting Up
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:
Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on
it.
Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Use the specified adaptor (page 61) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as
water seeps into the instrument, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the instrument inspected by qualified
Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.
Follow the precautions below. Failure to do so might result in explosion, fire,
overheating or battery fluid leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are not designed to be charged.
- Keep the batteries separate from metallic objects such as necklaces, hairpins,
coins, and keys.
- Use the specified battery type (page 12) only.
- Use new batteries, all of which are the same type, same model, and made by
the same manufacturer.
- Always make sure all batteries are inserted in conformity with the +/- polarity
markings.
- When the batteries run out, or if the instrument is not to be used for a long
time, remove the batteries from the instrument.
- When using Ni-MH batteries, follow the instructions that came with the
batteries. Use only the specified charger device when charging.
Keep batteries away from small children who might accidentally swallow them.
If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid
should come in contact with your eyes, mouth, or skin, wash immediately with
water and consult a doctor. Battery fluid is corrosive and may possibly cause loss
of sight or chemical burns.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. (If you are using batteries,
remove all batteries from the instrument.) Then have the device inspected by
Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
Battery
If you notice any abnormality
DMI-5 1/2
7
PSR-E433 Owner’s Manual
Setting Up
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables, to prevent damage
to the cables or injury to anyone who might trip over them.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the
desired listening level.
Do not insert a finger or hand in any gaps on the instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the panel or
keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Make sure to discard used batteries according to local regulations.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the
possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
Saving data
Some data items (page 32) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to malfunction or incorrect
operation. Save important data to external device such as a USB flash memory (page 51).
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights.
Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR
USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
Power supply/AC power adaptor
Location
Connections
Handling caution
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or
destroyed.
DMI-5 2/2
8
PSR-E433 Owner’s Manual
Setting Up
Compatible Format and Functions
GM System Level 1
“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible
music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer.
The GM mark is affixed to all software and hardware products that support GM System Level.
XGlite
As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation for-
mat. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in
mind that some songs may play back differently compared to the original data, due to the reduced set of
control parameters and effects.
USB
USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with
peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the
computer is on).
STYLE FILE
The Style File Format is Yamaha’s original style file format which uses a unique conversion system to
provide high-quality automatic accompaniment based on a wide range of chord types.
9
PSR-E433 Owner’s Manual
Setting Up
About the Manuals
This instrument has the following documents and instructional materials.
Included Documents
Owner’s Manual (this book)
• Setting Up Please read this section first.
• Quick Guide This section explains how to use the basic functions. Refer to this section while
playing the instrument.
• Reference This section explains how to make detailed settings for the various functions of
the instrument.
• Appendix This section includes troubleshooting information and specifications.
Data List
Contains various important preset content lists such as those of Voices, Styles, Patterns and Effects.
Online Materials (from Yamaha Manual Library)
MIDI Reference
Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart.
MIDI Basics (only in English, French, German and Spanish)
Contains basic explanations about MIDI.
Computer-related Operations
Includes instructions on connecting this instrument to a computer, and operations related to transferring song
data.
To obtain these manuals, access the Yamaha Manual Library, enter “PSR-E433” or “MIDI Basics” to the Model
Name box, then click [SEARCH].
Yamaha Manual Library http://www.yamaha.co.jp/manual/
Online Materials (for Yamaha Online members)
Song Book (only in English, French, German and Spanish)
Contains music scores for the preset Songs (excluding the Demo Songs) of this instrument. After completing the
user registration at the website below, you can download this Song Book free of charge.
Yamaha Online Member https://member.yamaha.com/myproduct/regist/
You will need the PRODUCT ID on the sheet (“Online Member Product Registration”) packaged with this
manual in order to fill out the User Registration form.
Included Accessories
• Owner’s Manual (this book)
• Data List
• AC Power Adaptor
*1
• Music Rest
• Online Member Product Registration
*2
*1: May not be included depending on your particular
locale. Check with your Yamaha dealer.
*2: The PRODUCT ID on the sheet will be needed when
you fill out the User Registration form.
Insert the music rest
into the slots as
shown.
Music Rest
10
PSR-E433 Owner’s Manual
Setting Up
Panel Controls and Terminals
Front Panel
q [MASTER VOLUME] control ................Page 14
w PITCH BEND wheel..............................Page 34
e [ ] (Standby/On) switch ....................Page 14
r LIVE CONTROL section
[ASSIGN] button ...............................Page 21
[A] and [B] knobs .............................Page 21
t [DEMO) button......................................Page 24
y [LESSON] button..................................Page 26
u [REC] button.........................................Page 28
i [METRONOME] button.........................Page 18
o TEMPO section
[TAP] button ......................................Page 42
[-] and [+] buttons .............................Page 42
!0 [PORTABLE GRAND] button ...............Page 16
!1 VOICE CONTROL section
[SPLIT] button...................................Page 17
[DUAL] button ...................................Page 16
[HARMONY] button ..........................Page 19
[ARPEGGIO] button..........................Page 20
!2 Playback Control buttons
When the [PATTERN] lamp is turned on:
................................ Pages 23 and 42
When the [SONG] lamp is turned on:
..............................................Page 25
When the [STYLE] lamp is turned on:
.........................Pages 22, 40, and 41
GrandPno
001
001
q
e
r
t y u i
o !1
w
!0
!2 !3
@3
Front Panel
Display (page 15)
Setting Up
11
PSR-E433 Owner’s Manual
Panel Controls and Terminals
Setting Up
!3 [TRACK CONTROL] buttons
When the [PATTERN] lamp is turned on:
..............................................Page 23
When the [SONG] lamp is turned on:
..............................................Page 25
When the [STYLE] lamp is turned on:
..............................................Page 41
!4 [PATTERN] button ................................Page 23
!5 [SONG] button......................................Page 24
!6 [STYLE] button .....................................Page 22
!7 [VOICE] button .....................................Page 16
!8 [MUSIC DATABASE] button.................Page 22
!9 [CATEGORY] buttons...........................Page 14
@0 [REGIST MEMORY] buttons ................Page 31
@1 [FUNCTION] button..............................Page 48
@2 Number buttons [1]–[9], [-/NO],
[0/EXECUTE] and [+/YES] buttons .....Page 14
@3 Drum illustrations for the Drum Kit....Page 16
Each of these indicates the drum or percussion instrument
assigned to the corresponding key for “Standard Kit 1.
Rear Panel
@4 USB terminals
USB TO HOST terminal*...................Page 50
USB TO DEVICE terminal ................Page 51
@5 SUSTAIN jack .......................................Page 13
@6 PHONES/OUTPUT jack........................Page 13
@7 Power supply jack................................Page 12
* For connecting to a computer. For details, refer to “Computer-
related Operations” (page 9). When connecting, use an AB type
USB cable of less than 3 meters. USB 3.0 cables cannot be
used.
!4 !5 !6 !7 !9
@2
@1
!8
@0
@4
@5
@6 @7
Rear Panel
Style List (Data List) Voice List (Data List) Pattern List (Data List)Dial (page 14)
Song List (Data List)
“Press & Hold” symbol
By holding down one of the
buttons having this symbol, you
can call up an alternate function,
other than the one called up
when simply pressing.
12
PSR-E433 Owner’s Manual
Setting Up
Setting Up
Power Requirements
Although the instrument will run either from an
optional AC adaptor or batteries, Yamaha recom-
mends use of an AC adaptor whenever possible. An
AC adaptor is more environmentally friendly than bat-
teries and does not deplete resources.
Using an AC Power Adaptor
1 Make sure that the power of the instrument is off
(display is blank, except for notation staff).
2 Connect the AC adaptor to the power supply jack.
3 Plug the AC adaptor into an AC outlet.
Using Batteries
This instrument requires six “AA” size, Alkaline
(LR6)/Manganese (R6) batteries, or rechargeable
nickel-metal hydride batteries (rechargeable Ni-MH
batteries). The Alkaline batteries or rechargeable Ni-
MH batteries are recommended for this instrument,
since other types may result in poorer battery perfor-
mance.
Installing the batteries
1 Make sure that the power of the instrument is off
(display is blank, except for notation staff).
2 Open the battery compartment cover located on the
instrument’s bottom panel.
3 Insert the six new batteries, being careful to follow
the polarity markings on the inside of the compart-
ment.
4 Replace the compartment cover, making sure that it
locks firmly in place.
When battery power becomes too low for proper oper-
ation, the volume may be reduced, the sound may be
distorted, and other problems may occur. When this
happens, make sure to replace all batteries with new
ones or already-recharged ones.
• Use the specified adaptor (page 61) only. Using the
wrong adaptor can result in damage to the instrument
or overheating.
• When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trou-
ble or malfunction occurs, immediately turn off the
power switch and disconnect the plug from the outlet.
Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When
you are not using the product for a long time, make
sure to unplug the power cord from the wall AC outlet.
• When using Ni-MH batteries, follow the instructions that
came with the batteries. Use only the specified charger
device when charging.
WARNING
CAUTION
AC outlet
AC power
adaptor
3
2
WARNING
• Connecting or disconnecting the power adaptor with bat-
teries installed may turn the power off, resulting in loss of
data being recorded or transferred at the time.
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
NOTICE
NOTE
13
PSR-E433 Owner’s Manual
Setting Up
Setting Up
Setting the battery type
After installing the new batteries then turning the
power on, make sure to set the Battery Type to
Rechargeable type or not. For details, refer to page 50.
Checking the power status on the
display
Power source on the display
You can confirm the power source at the left corner of
the display.
When is shown, the power is supplied from the
AC power adaptor. When is shown, the power is
supplied from the batteries. When the AC power adap-
tor is connected with the batteries installed, the power
is supplied from the AC power adaptor and the
indication is shown.
Remaining battery power indication
You can confirm the approximate amount of remain-
ing battery power at the top left of the display.
Connecting Headphones or
External Audio Equipment
Any pair of stereo headphones with a 1/4” stereo
phone plug can be plugged in here for convenient
monitoring. The speakers are automatically shut off
when a plug is inserted into this jack.
The PHONES/OUTPUT jack also functions as an
external output. You can connect the PHONES/OUT-
PUT jack to a keyboard amplifier, stereo system,
mixer, tape recorder, or other line-level audio device
to send the instrument’s output signal to that device.
Connecting a Footswitch to the
SUSTAIN jack
You can produce a natural sustain as you play by
pressing an optional Footswitch plugged into the
[SUSTAIN] jack.
• Failure to set the Battery Type may shorten the amount of
the battery life. Make sure to set the Battery Type correctly.
Indicates that the power will be turned off
immediately. When rechargeable batteries are
used, this icon flashes before the power is
turned off.
Indicates that remaining power is insufficient
for operation. Before the power runs out,
replace all the batteries with new ones, or fully
recharged ones (when using rechargeable
types). Note that the instrument may not work
properly, including unusually soft volume and
poor sound quality when remaining power
becomes low.
Indicates that the remaining power is suffi-
cient.
NOTICE
Only one of these is shown.
GrandPno
Do not use the instrument/device or headphones for a long
period of time at a high or uncomfortable volume level,
since this can cause permanent hearing loss. If you experi-
ence any hearing loss or ringing in the ears, consult a phy-
sician.
• Before connecting the instrument to other electronic com-
ponents, set all volume levels to the minimum, then turn
off the power for all components.
• When the instrument’s sound is output to an external
device, first turn on the power to the instrument, then to
the external device. Reverse this order when you turn the
power off.
• The sustain function does not affect split voices (page 17).
• Make sure that the footswitch plug is properly connected to
the SUSTAIN jack before turning on the power.
• Do not press the footswitch while turning the power on. Doing
this changes the recognized polarity of the footswitch, result-
ing in reversed footswitch operation.
CAUTION
NOTICE
NOTE
14
PSR-E433 Owner’s Manual
Setting Up
Basic Operations
Turning the Power On/Off
Turn down the MASTER VOLUME control to “MIN”
then press the [ ] (Standby/On) switch to turn on the
power. While playing the keyboard, adjust the MAS-
TER VOLUME control. To turn off the power, press
the [ ] (Standby/On) switch again for a second.
Auto Power Off Function
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for a specified period of time. The amount
of time that will elapse before the power is automati-
cally turned off is set by default to 30 minutes.
To disable the Auto Power Off function:
Turn off the power, then press the [ ] (Standby/On)
switch to turn on the power while holding down the
lowest key.
To set the time that elapses before Auto
Power Off is executed:
Press the [FUNCTION] button, press the CATEGORY
[+] or [-] button several times until “Auto Power Off”
appears then select the desired value.
Settings: OFF, 5, 10, 15, 30, 60, 120
Default value: 30
Selecting Operations
Before operating the instrument, it may be helpful to
familiarize yourself with the basic controls below that
are used to select items and change values.
Dial
Rotate the dial clockwise to
increase the value, or counter-
clockwise to decrease the
value.
Number buttons
Use the Number buttons to directly enter an item or
value. For numbers that start with one or two zeroes,
the first zeroes can be omitted.
[-] and [+] buttons
Press the [+] button briefly to increase the value by 1, or
press the [-] button briefly to decrease the value by 1.
Press and hold either button to continuously increase or
decrease the value in the corresponding direction.
CATEGORY buttons
Use these buttons to jump to the
first Voice, Style, or Song in the
next or previous Category, and call
up the next or previous Function
sequentially.
• When using a power adaptor, even when the power is off, a
small amount of electricity is still being consumed by the
instrument. When you are not using the instrument for a
long time, make sure to unplug the AC power adaptor from
the wall AC outlet.
Generally, the data and settings are maintained even when the
power is turned off. For details, see page 32.
• Depending on the instrument status, the power may not
turn off automatically, even after the elapse of the specified
period of time. Always turn off the power manually when
the instrument is not in use.
CAUTION
NOTE
NOTICE
• When the instrument is not operated for a specified period
of time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner’s Manual to turn off the power to
the instrument and the connected devices, in order to pro-
tect the devices from damage. If you do not want the
power to turn off automatically when a device is con-
nected, disable Auto Power Off.
IncreaseDecrease
Press briefly to
increase.
Press briefly to
decrease.
15
PSR-E433 Owner’s Manual
Setting Up
Display Items
The display shows all the current settings of the Song, Style Pattern, Voice and other
related functions.
GrandPno
001
001
This area indicates the on/off status of
each function. Each indication is
shown when the corresponding func-
tion is turned on.
Page 17
Page 16
Page 19
Page 20
Page 35
Page 22
Page 41
On/off status
Normally this indicates the notes you play.
When the Song Lesson function is used, this
indicates the current notes and chord of play-
back. When the Dictionary function is used,
this indicates the notes of the chord you specify.
Notation
• Any notes occurring below or above the staff are
indicated by “8va.
• For a few specific chords, not all notes may be
shown, due to space limitations in the display.
NOTE
Indicates the source from which this
instrument obtains power, AC power
adaptor or batteries. (Page 13)
Appears when USB flash memory is
connected to this instrument. (Page 51)
Power source status
USB connection status
Indicates the current beat of playback. (Page 24)
Indicates the parameters currently assigned to the
Knobs. (Page 21)
Indicates the Function number when the [FUNC-
TION] button is pressed, or the current Measure
number during playback of a Song, Style or Pattern.
Indicates the chord which is being played on the key-
board (Page 22) or specified via Song playback.
Indicates the on/off status of the current
Song, Style or Pattern. (Pages 23, 28,
41)
Beat
Knob assignment
FUNCTION and MEASURE
Chord
Track status
001
PSR-E433 Owner’s Manual
16
Quick Guide
Try Playing a Variety of Instrument Voices
In addition to piano, organ, and other “standard” keyboard instruments, this instru-
ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,
drums and percussion, and even sound effects—giving you a wide variety of musical
sounds.
1
Press the [VOICE] button.
The Voice number and name will be shown.
2
Use the dial to select the desired Voice.
3
Play the keyboard.
Preset Voice Types
When you want to reset various settings to default and
simply play a Piano sound, press the [PORTABLE
GRAND] button.
The Voice number is set to 001 Grand Piano and all
the settings such as Dual and Split are turned off auto-
matically, with exception of the Touch Sensitivity
(page 35).
In addition to the Main Voice, you can layer a differ-
ent Voice over the entire keyboard as a “Dual Voice.
1
Press the [DUAL] button to turn Dual on.
2
Press the [DUAL] button again to exit
from Dual.
Although turning on Dual will select a Dual Voice
suitable for the current Main Voice, you can easily
select a different Dual Voice (page 36).
Selecting a Main Voice
001–206 Instrument Voices.
207–229
(Drum Kit)
Various drum and percussion sounds are
assigned to individual keys. Details on assign-
ing instruments to keys are provided in the
Drum Kit List of the separate Data List.
230–269 Used for arpeggio performance (page 20).
GrandPno
001
Appears after the [VOICE]
button is pressed.
Voice name
Voice number
Flute
148
Select 148 Flute
Playing the “Grand Piano”
Layering a Dual Voice
Flute
148
Two voices will
sound at the
same time.
Appears when
dual voice is on
Quick Guide
Try Playing a Variety of Instrument Voices
PSR-E433 Owner’s Manual
17
Quick Guide
By dividing the keyboard into the two separate areas,
you can play a different Voice between the Left hand
and Right hand areas.
1
Press the [SPLIT] button to turn on Split.
The keyboard is divided into the Left hand and
Right hand areas.
You can play a “Split Voice” on the Left hand area
of the keyboard while playing a Main Voice and
Dual Voice on the Right hand area of the key-
board.
The highest key for the Left hand area is referred
to as the “Split Point” which can be changed from
the default F#2 key. For details, refer to page 36.
2
Press the [SPLIT] button again to exit
from Split.
You can easily select a different Split Voice (page 36).
Playing a Split Voice in the Left
Hand area
Flute
148
Appears when split
voice is on
Split voice Main voice and
dual voice
Split Point
Try Playing a Variety of Instrument Voices
PSR-E433 Owner’s Manual
18
Quick Guide
The instrument features a built-in metronome (a
device that keeps an accurate tempo), convenient for
practicing.
1
Press the [METRONOME] button to start
the metronome.
2
Press the [METRONOME] button again
to stop the metronome.
Adjusting the Metronome Tempo
Press the TEMPO [TAP] button to call up the Tempo
value, then use the TEMPO [-] and [+] buttons to
adjust the Tempo value.
The dial and the Number buttons can also be used to
set the Tempo.
Setting the Time Signature
Here, we’ll set a time signature of 5/8 as an example.
1
Hold down the [METRONOME] button
for longer than a second to call up
“TimeSigN” (Time Signature Numera-
tor).
The number of beats per measure is shown on the
display.
2
Rotate the dial to select the number of
beats per measure.
A chime will sound on the first beat of each mea-
sure while the other beats will click. If “0” is
selected, all beats will simply click with no chime.
Select 5 for this example.
3
Press the CATEGORY [+] button to call
up “TimeSigD” (Time Signature Denom-
inator).
The length of one beat is shown on the display.
4
Rotate the dial to select the length of
one beat, from 2
nd
, 4
th
, 8
th
and 16
th
note.
Select “08” (8
th
note) for this example.
5
Confirm the setting by playing the Met-
ronome.
Setting the Metronome Volume
1
Press the [FUNCTION] button.
2
Press the CATEGORY [+] or [-] buttons
repeatedly until “MtrVol” appears.
3
Rotate the dial to set the Metronome Vol-
ume.
Using the Metronome
Tempo
090
Current Tempo value
TimeSigN
04
Number of beats
per measure.
Hold for longer
than a second.
• This parameter cannot be set during playback of a Style,
Song or Pattern.
NOTE
TimeSigD
04
The length
of one beat.
MtrVol
100
053
Metronome volume
Try Playing a Variety of Instrument Voices
PSR-E433 Owner’s Manual
19
Quick Guide
You can add harmony notes to the Main Voice.
1
Press the [HARMONY] button to turn
Harmony on.
Although turning on the Harmony will select a
Harmony Type suitable for the current Main
Voice, you can select a different Harmony Type.
2
Hold down the [HARMONY] button for
longer than a second until “HarmType”
appears on the display.
After “HarmType” is shown for a few seconds, the
current Harmony Type appears.
3
Rotate the dial to select the desired Har-
mony Type.
For details, refer to the separate Data List.
The effect and operation differs depending on the
Harmony Type. Refer to the section below.
You can adjust the Harmony Volume in the Function
Settings (page 49).
Adding Harmony
Appears when the Harmony
is turned on.
HarmType
038
Hold for longer
than a second.
Trio
02
038
Current Harmony Type
How to sound each Harmony Type
• Harmony type 01 to 05
Press the right-hand keys while playing chords in
the auto accompaniment range of the keyboard
when the Auto Accompaniment is on (page 22).
• Harmony type 06 to 12 (Trill)
Hold down two keys.
• Harmony type 13 to 19 (Tremolo)
Keep holding
down the keys.
• Harmony type 20 to 26 (Echo)
PSR-E433 Owner’s Manual
20
Quick Guide
Creating Arpeggios
The Arpeggio function lets you create arpeggios (broken chords) by simply pressing
the notes of the chord. For example, you could play the notes of a triad—the root, third,
and fifth—to trigger interesting phrases. This feature can be used for music production
as well as performance.
1
Press the [ARPEGGIO] button to turn on
the Arpeggio function.
2
Press a note or notes to trigger Arpeg-
gio.
The Arpeggio phrase differs depending on the
number of pressed notes and the area of the key-
board.
When Split is on, Arpeggio is applied only to the
Split Voice. When Split is off, Arpeggio is applied
to the Main and Dual Voices. Arpeggio cannot be
applied to the Split and Main/Dual Voices simulta-
neously.
For instructions on selecting a Split Voice, refer to
page 36.
Note that selecting one of the Main Voices 260–
269 will call up the appropriate Split Voice.
3
To turn off the Arpeggio, press the
[ARPEGGIO] button again.
The most suitable Arpeggio Type is automatically
selected when you select a Main Voice, but you can
easily select any other Arpeggio Type.
1
Hold down the ARPEGGIO [TYPE] but-
ton for longer than a second.
In the display, “ARP Type” appears for a few sec-
onds, followed by the current Arpeggio Type
appears.
2
Rotate the dial to select the desired
Arpeggio type
An Arpeggio Type List is provided in the separate
Data List.
Triggering the Arpeggio
• Selecting a Voice number between 230 and 269 will turn
on Arpeggio automatically.
• When you select a Voice between 260 and 269, play a
key to the left of the Split Point, since Arpeggio is applied
only to the Split Voice.
• When an optional Footswitch (page 13) connected to the
SUSTAIN jack is pressed, the Arpeggio will continue to
play after the note is released (page 39).
Flute
148
NOTE
NOTE
Changing the Arpeggio Type
Hold for longer
than a second.
DownOct
002
The currently selected arpeggio
type
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Yamaha PSR-E433 Le manuel du propriétaire

Catégorie
Claviers
Taper
Le manuel du propriétaire