wattstopper LMCP-LI48 Guide d'installation

Taper
Guide d'installation
Wattstopper
®
DLM - LI to LMCP Retrofit Kits
Installation Instructions • Instructions d’Installation • Instrucciones de Instalación
No: 24800 – 11/16 rev. 1
Catalog Numbers • Les Numéros de Catalogue • Números de Catálogo: LMCP-LI8/LMCP-LI24/LMCP-LI48
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
LMCP-LI8 RETROFIT KIT INSTALLATION
Step 1: Remove all interior components leaving relays and
power supply only.
Fig. 1: Example LI8
panel assembly
Fig. 2: After removing
interior items
Step 2: Install adapter plate.
Spacer mounting detail
Mounting plate
screw locations
(Total 4 X # 6-32
screws for
mounting plate)
LMCP-LI8-MP
(P/N #841439)
Fig. 3: Mounting details
Step 3: Install LMRD and LMPI cards.
CAUTION: Do not overtighten screws.
Mounting PCBA of
LMRD & LMPI locations
Use # 4-40 screws. QTY:
6
Use # 6-32 screws. QTY:
4
LMRD-8
(P/N #16916)
LMPI
(P/N #17162)
Fig. 4: LMRD and LMPI mounting details
Step 4:
Connect LMRD card to LMPI.
Connect relays to LMRD card.
Connect power to LMPI.
(See Relay Connection Details for DIP Switch settings.)
Power supply connection detail
Fig. 5: Connection details
Step 5: Apply upgrade label.
Fig. 6: Label location suggestion
2
LMCP-L24 RETROFIT KIT INSTALLATION
Step 1: Remove all interior components, leaving relays and
power supply only.
Step 2: Install LMRD and LMPI assemblies.
Step 3:
Connect LMRD to LMPI.
Connect relays to LMRD card.
Connect power to LMPI.
(See Relay Connection Details for DIP Switch settings.)
Step 4: Apply upgrade label.
Fig. 7: Example LI24
panel ssembly
Fig. 9: Mounting details
Fig. 10: Connection details Fig. 11: Label location suggestion
Fig. 8: After removing
interior items
Power supply connection detail
LMPI-ASSY
P/N # 770431
LMRD-12
P/N # 16694
Mounting plate screw locations
(Total 4 #6-32 screws for
mounting plate)
M
ounting plate screw locations
(Total 4 #6-32 screws
for mounting plate
)
3
LMCP-L48 RETROFIT KIT INSTALLATION
Step 1: Remove all interior components, leaving relays and
power supply only.
Step 2: Install LMRD and LMPI assemblies.
Step 3:
Connect LMRD to LMPI.
Connect relays to LMRD card.
Connect power to LMPI.
(See Relay Connection Details for DIP Switch settings.)
Step 4: Apply upgrade label.
Fig. 7: Example LI48
panel ssembly
Fig. 9: Mounting details
Fig. 10: Connection details
Fig. 11: Label location suggestion
Fig. 8: After removing
interior items
LMRD-12
(P/N #16694)
LMRD-12
(P/N #16694)
LMPI-ASSY
(P/N #770431)
Mounting plate screw location
s
(Total 4 #6-32 screws fo
r
mounting plate)
Mounting plate screw
locations (Total 7 #6-32 screws,
4 on top LMRD-12 assy,
3 on bottom LMRD-12 assy)
LMRD-12-MP
(P/N #841436)
Power supply connection detail
800.879.8585
www.legrand.us/wattstopper
No. 24800 – 11/16 rev. 1
© Copyright 2016 Legrand All Rights Reserved.
© Copyright 2016 Tous droits réservés Legrand.
© Copyright 2016 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free of defects
in materials and workmanship for a period of five (5)
years. There are no obligations or liabilities on the part
of Wattstopper for consequential damages arising out
of, or in connection with, the use or performance of this
product or other indirect damages with respect to loss of
property, revenue or profit, or cost of removal, installation
or reinstallation.
Wattstopper garantit que ses produits sont exempts
de défauts de matériaux et de fabrication pour une
période de cinq (5) ans. Wattstopper ne peut être tenu
responsable de tout dommage consécutif causé par ou
lié à l’utilisation ou à la performance de ce produit ou
tout autre dommage indirect lié à la perte de propriété,
de revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos están libres
de defectos en materiales y mano de obra por un
período de cinco (5) años. No existen obligaciones
ni responsabilidades por parte de Wattstopper
por daños consecuentes que se deriven o estén
relacionados con el uso o el rendimiento de este
producto u otros daños indirectos con respecto a
la pérdida de propiedad, renta o ganancias, o al
costo de extracción, instalación o reinstalación.
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
RELAY CONNECTION DETAILS
Option 1:
5-pin connector
DIP Switch Setting
1, 2, 3, 4, 6 Reserved (OFF)
5 ON (for GE relays)
OFF (for HDR relays)
7 ON: Relays ON/OFF during PnL
OFF: Only pilot LEDs ON/OFF during PnL
8 ON: Pilot LEDs follow logic
OFF: Pilot LEDs follow Pilot
Option 2:
3-pin connector (no pilot)
DIP Switch Setting
1, 2, 3, 4, 6 Reserved (OFF)
5 ON (50 ms pulse width)
7 ON: Relays ON/OFF during PnL
OFF: Only pilot LEDs ON/OFF during PnL
8 ON
(LMCP-GE12 assembly shown
as reference)
12345678
ON
12345678
ON
Option 1:
5-pin connector
DIP
switches
1, 2, 3, 4, 6: Reserved (OFF)
5 - ON (for GE relays)
- OFF (for HDR relays)
7 - ON: Relays ON/OFF during PnL
- OFF: Only pilot LEDs ON/OFF
during PnL
8 - ON: Pilot LEDs follow logic
- OFF: Pilot LEDs follow Pilot
Option 2:
3-pin connector (no pilot)
DIP switches
1, 2, 3, 4, 6: Reserved (OFF)
5 - ON (50 ms pulse width)
7 - ON: Relays ON/OFF during PnL
- OFF: Only pilot LEDs ON/OFF
during PnL
8 - ON
PARTS LIST
LMCP-LI8 LMCP-LI24 AND LMCP-LI48
Part Description
Part
Number
Quantity Part Description
Part
Number
Quantity
LI24 LI48
LMRD-8 #16916 1 LMRD-12 #16694 2 4
LMPI #17162 1
LMPI-ASSY #770431 1 1
LMCP-LI8-MP #841439 1 LMRD-12-MP #841436 1 2
Cable Assembly #841449 1 Cable Assembly #841449 2 4
Spacer Standoff #882162 2 Screw #6-32 L=5/16 #17686 8 11
Screw #6-32
L=5/16
#17686 8
Screw #4-40
L=1/4
#05288 6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

wattstopper LMCP-LI48 Guide d'installation

Taper
Guide d'installation

dans d''autres langues