Braun 797cc-7 Wet & Dry, Series 7 Manuel utilisateur

Marque: Braun

Modèle: 797cc-7 Wet & Dry, Series 7

Catégorie: Rasoirs pour hommes

Taper: Manuel utilisateur

www.braun.com

Series 7

Type 5696

Modèle 5696

Modelo 5696

797cc-7

Wet & Dry

Peau sèche et

mouillée

96730388_797cc-7_NA_S1.indd 196730388_797cc-7_NA_S1.indd 1 18.12.13 08:3018.12.13 08:30

Stapled booklet, 110 x 200 mm, 50 pages (incl. 6 pages cover), 2/2c = HKS43N + black

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 1 of 50

Thank you for purchasing a Braun product.

We hope you are completely satisfied with

your new Braun shaver.

If you have any questions, please call:

US residents 1-800-BRAUN-11

1-800-272-8611

Canadian residents 1-800-387-6657

Merci d’avoir fait l’achat d’un produit Braun.

Nous espérons que vous serez entièrement

satisfait de votre nouveau rasoir Braun.

Si vous avez des questions, veuillez appeler

Braun Canada au : 1-800-387-6657

Gracias por haber comprado un producto

Braun.

Esperamos que quede completamente

satisfecho con su nueva afeitadora Braun.

Si tiene alguna duda, por favor llame al:

01(800) 508-5800

English 4

Français 19

Español 34

96730388/XII-13

USA / CDN / MEX

96730388_797cc-7_NA_S2.indd 196730388_797cc-7_NA_S2.indd 1 18.12.13 08:3218.12.13 08:32

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 2 of 50

trimmer

off

trimmer

Series 7

mme

eri

wet & dry

96730388_797cc-7_NA_S3.indd 196730388_797cc-7_NA_S3.indd 1 18.12.13 08:3218.12.13 08:32

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 3 of 50

English

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic precautions should

always be followed, including the following:

Read all instructions before using this appliance.

When disconnected, the hand-held part of this shaving

appliance may be used in a bath or shower. For safety

reasons, the appliance can only be operated cordlessly.

DANGER

To reduce the risk of electric shock:

1. The charger unit is not for immersion in water or for use in

shower.

2. Do not reach for a charger that has fallen into water. Unplug

immediately.

3. Do not place, store or charge the appliance where it can fall or

be pulled into a tub or sink. Do not place in or drop into water or

other liquid.

4. Except when charging, always unplug this appliance from the

electrical outlet immediately after using.

5. This appliance is provided with a special cord set with

integrated Safety Extra Low Voltage power supply. Do not

exchange or manipulate any part of it.

6. Do not use an extension cord with this appliance.

SAVE THESE INSTRUCTIONS

96730388_797cc-7_NA_S4-50.indd 496730388_797cc-7_NA_S4-50.indd 4 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 4 of 50

WARNING

To reduce the risk of burns, fire, electric shock, or injury to

persons:

1. Close supervision is necessary when this appliance is used by,

on, or near children or persons with disabilities.

2. Use this appliance only for its intended use as described in

this manual. Do not use attachments not recommended by the

manufacturer.

3. Never operate this appliance if it has a damaged cord or plug,

if it is not working properly, if it has been dropped or damaged,

or if the power supply has been dropped into water. Return the

appliance to a service center for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never drop or insert any object into any opening

of the

appliance

6. Do not use outdoors or operate where aerosol (spray)

products are being used or where oxygen is being

administered.

7. Do not use this appliance with a damaged or broken foil, as

serious skin injuries may occur.

8. Always attach plug to appliance first, then to outlet.

To disconnect, turn all controls off, then remove plug from

outlet.

9. When plugging to an electrical outlet outside North America,

use a plug adapter to match the outlet’s pin configuration.

10. Caution: The battery used in this device may present a fire or

chemical burn hazard if mistreated. Do not disassemble, heat

above 100 °C (212 °F), or incinerate.

11. Only use the special electric cord set provided with the

appliance.

SAVE THESE INSTRUCTIONS

96730388_797cc-7_NA_S4-50.indd 596730388_797cc-7_NA_S4-50.indd 5 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 5 of 50

Our products are designed to meet the highest

standards of quality, functionality and design.

We hope you enjoy your new Braun Shaver.

Warning

To prevent the cleaning ﬂ uid from leaking, ensure

that the Clean&Renew station is placed on a ﬂ at

surface. When a cleaning cartridge is installed,

do not tip, move suddenly or transport the

station in any way, as cleaning ﬂ uid might spill

out of the cartridge. Do not place the station

inside a mirror cabinet, over a radiator, or on a

polished or lacquered surface.

The cleaning cartridge contains a highly

ﬂ ammable liquid, so keep it away from sources

of ignition. Do not expose to direct sunlight,

smoke nearby, or store it over a radiator.

Keep it out of reach of children.

Do not reﬁ ll the cleaning cartridge. Use only

original Braun reﬁ ll cartridges.

This appliance is designed for household use

only.

Description

Clean&Renew station

1 Cleaning ﬂ uid display

2 Lift button for cartridge exchange

3 Station-to-shaver contacts

4 Start button

D Fast clean button

5 Cleaning program indicators

6 Station power socket

7 Cleaning cartridge

Shaver

8 Foil & Cutter cassette

9 Cassette release button

0 Shaver head lock switch

q Pop-out long hair trimmer

w On/off switch

e – setting button (sensitive)

r + setting button (intensive)

t Reset button

z Shaver display

u Shaver-to-station contacts

i Shaver power socket

o Travel case

p Special cord set

96730388_797cc-7_NA_S4-50.indd 696730388_797cc-7_NA_S4-50.indd 6 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 6 of 50

Before shaving

Prior to ﬁ rst use you must connect the shaver to

an electrical outlet using the special cord set p

or alternatively proceed as below.

Installing the Clean&Renew station

• Using the special cord set

p, connect the

station power socket 6 to an electrical outlet.

• Press the lift button 2 to open the housing.

• Hold the cleaning cartridge 7 down on a ﬂ at,

stable surface (e.g. table).

• Carefully remove the lid from the cartridge.

• Slide the cartridge into the base of the station

as far as it will go.

• Slowly close the housing by pushing it down

until it locks.

The cleaning ﬂ uid display 1 will show how much

ﬂ uid is in the cartridge:

up to 30 cleaning cycles available

up to 7 cleaning cycles remaining

new cartridge required

Charging and cleaning the shaver

Insert the shaver head down into the cleaning

station. The contacts u on the back of the

shaver will align with the contacts 3 in the

cleaning station. Important: The shaver needs

to be dry and free from any foam or soap

residue!

If required, the Clean&Renew station will auto-

matically charge the shaver. The hygiene status

of the shaver will also be analyzed and one of

the following cleaning program indicators 5 will

light up:

shaver is clean

short economical cleaning required

normal level of cleaning required

high intensive cleaning required

If the station selects one of the required cleaning

programs, it will not start unless you press the

start button 4. For best shaving results, we

recommend cleaning after each shave.

trimmer

Series 7

96730388_797cc-7_NA_S4-50.indd 796730388_797cc-7_NA_S4-50.indd 7 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 7 of 50

While cleaning is in progress, the respective

cleaning program indicator will blink. Each

cleaning program consists of several cycles,

where cleaning ﬂ uid is ﬂ ushed through the

shaver head and a heat drying process dries

the shaver. Depending on the program selected

the total cleaning time will range from 32 to 43

minutes.

The cleaning programs should not be inter-

rupted. Please note that while the shaver is

drying, the shaver head may be hot and wet.

When the program is ﬁ nished, the blue

indicator will light up. Your shaver is now clean

and ready for use.

Fast cleaning

Push the fast clean button D to activate

the fast clean program without drying. This

program takes about 25 seconds only and is

recommended when you do not have time to

wait for one of the automatic cleaning programs.

If you remove the shaver just after the program

has ﬁ nished, wipe off the shaver head with a

tissue to avoid dripping.

Stand-by mode

10 minutes after completing the charging or

cleaning session, the Clean&Renew station

switches to the stand-by mode: The indicators

of the Clean&Renew station turn off.

Shaver display

The shaver display z shows the charge status

of the battery on the left, and the hygiene status

on the right. 6 dark segments are shown on each

side when the battery is fully charged and the

shaver is hygienically clean.

Battery segments:

During charging or when using the shaver, the

respective battery segments will blink. When

fully charged all 6 segments are shown. With

decreasing charge the segments gradually

disappear.

Low charge indicator:

The low charge indicator provided with a red

frame blinks to indicate that the charge has

dropped below 20%. The remaining battery

capacity is sufﬁ cient for 2 to 3 shaves.

96730388_797cc-7_NA_S4-50.indd 896730388_797cc-7_NA_S4-50.indd 8 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 8 of 50

Hygiene segments:

All 6 hygiene segments will appear after the

shaver has been cleaned in the Clean&Renew

station. When the shaver is being used, the

hygiene segments will gradually disappear.

Once the shaver is returned to the station, the

system will automatically select the appropriate

cleaning program and restore the segments

to maximum hygiene. Given that rinsing the

shaver under tap water is not as hygienic as the

cleaning station, the hygiene segments will only

restore themselves when the shaver has been

cleaned in the Clean&Renew station.

Charging information

• A full charge will take about 1 hour and

provides up to 50 minutes of cordless shaving

time. This may vary according to your beard

growth and environmental temperature.

5-minute quick charge is sufﬁ cient for a shave.

• Recommended ambient temperature for

charging is 41 °F to 95 °F / 5 °C to 35 °C.

The battery may not charge properly or at

all under extreme low or high temperatures.

Recommended ambient temperature for

shaving is 60 °F to 95 °F / 15 °C to 35 °C.

Do not expose the shaver to temperatures

higher than 122 °F / 50 °C for extended

periods of time.

Using the shaver

Personalizing your shaver

By holding down the accelerator button –/+

(e or r) you can adjust the shaving power to

your individual needs in the different areas of

your face from sensitive to intensive. The pilot

light in the start button w changes within the

following range:

(–) sensitive shave

– light blue (level 1)

– dark blue (level 2, 3, 4)

– green (level 5)

(+) intensive/turbo shave

For a thorough and fast shave we recommend

the green (intensive) setting. When switching on

next time, the last used setting will be activated.

96730388_797cc-7_NA_S4-50.indd 996730388_797cc-7_NA_S4-50.indd 9 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 9 of 50

How to use

Press the on/off switch

w to operate the shaver:

• The pivoting shaver head and ﬂ oating foils

automatically adjust to every contour of your

face.

• To shave hard to reach areas (e.g. under the

nose) slide the shaver head lock switch

0 to

the back position to lock the pivoting head at

an angle.

• To trim sideburns, mustache or beard, slide the

pop-out long hair trimmer q upwards.

Tips for the perfect dry shave

For best shaving results, Braun recommends you

follow 3 simple steps:

1. Always shave before washing your face.

2. At all times, hold the shaver at right angles

(90°) to your skin.

3. Stretch your skin and shave against the

direction of your beard growth.

Cleaning

Automatic cleaning

After each shave, return the shaver to the

Clean&Renew station and proceed as described

above in the section «Before shaving».

All charging and cleaning needs are then

automatically taken care of. With daily use, a

cleaning cartridge should be sufﬁ cient for about

30 cleaning cycles.

The hygienic cleaning cartridge contains alcohol,

which once opened will naturally evaporate

slowly into the surrounding air. Each cartridge,

if not used daily, should be replaced after

approximately 8 weeks.

The cleaning cartridge also contains lubricants,

which may leave residual marks on the outer foil

frame after cleaning. However, these marks can

be removed easily by wiping gently with a cloth

or soft tissue paper.

lock

trimmer

90°

imme

96730388_797cc-7_NA_S4-50.indd 1096730388_797cc-7_NA_S4-50.indd 10 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 10 of 50

Manual cleaning

Rinsing the shaving head under running water

is an alternative way to keep the shaver clean,

especially when travelling:

• Switch the shaver on (cordless) w and rinse

the shaver head under hot running water until

all residues have been removed. You may use

liquid soap without abrasive substances. Rinse

off all foam and let the shaver run for a few

more seconds.

• Next, switch off the shaver, press the release

button 9 to remove the Foil & Cutter cassette

8 and let it dry. The shaver shall not be used

until it has dried.

• If you regularly clean the shaver under

water, then once a week apply a drop of

light machine oil on top of the Foil & Cutter

cassette.

Alternatively, you may clean the shaver with a

brush:

• Switch off the shaver. Remove the Foil & Cutter

cassette 8 and tap it out on a ﬂ at surface.

Using the brush, clean the inner area of the

pivoting head. However, do not clean the

cassette with the brush as this may damage it.

Cleaning the housing

From time to time clean the housing of the

shaver and the Clean&Renew station with a

damp cloth, especially inside the cleaning

chamber where the shaver rests.

Replacing the cleaning cartridge

After having pressed the lift button 2 to open the

housing, wait for a few seconds before removing

the used cartridge to avoid any dripping.

Before discarding the used cartridge, make sure

to close the openings using the lid of the new

cartridge, since the used cartridge will contain

contaminated cleaning solution.

trimmer

Series 7

Series

click!

clic!

Series 7

96730388_797cc-7_NA_S4-50.indd 1196730388_797cc-7_NA_S4-50.indd 11 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 11 of 50

Keeping your shaver in top shape

Replacing the Foil & Cutter cassette

reset

To maintain 100% shaving performance, re-

place the Foil & Cutter cassette 8, when the

replacement symbol lights up on the shaver

display

z (after about 18 months) or when

cassette is worn.

The replacement symbol will remind you during

the next 7 shaves to replace the Foil & Cutter

cassette. Then the shaver will automatically reset

the display.

After you have replaced the Foil & Cutter

cassette, use a ball-point pen to push the reset

button t for at least 3 seconds to reset the

counter.

While doing so, the replacement light blinks and

goes off when the reset is complete. The manual

reset can be done at any time.

Accessories

Available at your dealer or Braun Service

Centers:

• Foil & Cutter cassette 70S

• Cleaning cartridge Clean&Renew CCR

Environmental notice

This appliance contains rechargeable

batteries. To protect the environment,

do not dispose of the appliance in the

household waste at the end of its useful life.

Disposal can take place at a Braun Service

Center or appropriate collection sites.

The cleaning cartridge can be disposed of with

regular household waste.

Subject to change without notice.

For electric speciﬁ cations, see printing on the

special cord set.

Series 7

70S

96730388_797cc-7_NA_S4-50.indd 1296730388_797cc-7_NA_S4-50.indd 12 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 12 of 50

Trouble-Shooting

Problem: Possible reason: Remedy:

SHAVER

Unpleasant

smell from the

shaver head.

1. Shaver head is

cleaned with water.

2. Cleaning cartridge is

in use for more than

8 weeks.

1. When cleaning the shaver head

with water only use hot water

and from time to time some

liquid soap (without abrasive

substances). Remove Foil &

Cutter cassette to let it dry.

2. Change cleaning cartridge at

least every 8 weeks.

Battery

performance

dropped

significantly.

1. Foil and cutter are

worn which requires

more power for each

shave.

Shaver head is

regularly cleaned with

water but not

lubricated.

1. Renew Foil & Cutter cassette.

2. If the shaver is regularly cleaned

with water, apply a drop of light

machine oil on top of the foil

once a week for lubrication.

Shaving

performance

dropped

significantly.

1. Foil and cutter are

worn.

2. Personal setting of

shaving performance

has been changed.

3. Shaving system is

clogged.

1. Renew Foil & Cutter cassette.

2. For a thorough and fast shave

we recommend the green

(intensive) setting.

3. Soak the Foil & Cutter cassette

into hot water with a drop of

dish liquid. Afterwards rinse it

properly and tap it out.

Once dry apply a drop of light

machine oil on the foil.

Shaver turns

off with fully

charged battery.

Foil and cutter are worn

which requires more

power than the motor

can deliver.

The appliance turns off.

– Renew Foil & Cutter cassette.

– Regularly oil the shaving

system, especially when

cleaning with water only.

Battery

segments in the

display are

skipped with

decreasing

battery capacity.

Foil and cutter are worn

which requires more

power for each shave.

– Renew Foil & Cutter cassette.

– Regularly oil the shaving

system, especially when

cleaning with water only.

Shaving parts

have been

changed recently

but replacement

symbol lights up.

Reset button has not

been pushed.

– Push the reset button for at

least 3 seconds to reset the

counter.

96730388_797cc-7_NA_S4-50.indd 1396730388_797cc-7_NA_S4-50.indd 13 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 13 of 50

CLEAN&RENEW STATION

Shaving system

is still wet

after cleaning

Program

has been

completed.

1. Drain of the Cle-

an&Renew station is

clogged.

2. Cleaning cartridge

has been used for

quite a while.

1. Clean the drain with a wooden

toothpick. Regularly wipe the

tub clean.

2. The ethanol proportion has

decreased while the oil

proportion has increased.

Remove residue with a cloth.

Cleaning does

not start when

pressing the

start button.

1. Shaver is not placed

properly in the

Clean&Renew station.

2. Cleaning cartridge

contains not enough

cleaning fluid (display

lights red).

3. Appliance is in

stand-by mode.

1. Insert shaver into the Clean&Re-

new station (contacts of the

shaver need to align with

contacts in the station).

2. Insert new cleaning cartridge.

3. Press start button again.

Increased

consumption of

cleaning fluid.

Drain of the Clean&Re-

new station

is clogged.

– Clean the drain with a wooden

toothpick.

– Regularly wipe the tub clean.

96730388_797cc-7_NA_S4-50.indd 1496730388_797cc-7_NA_S4-50.indd 14 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 14 of 50

How to obtain service in the USA and Canada

60 day money back satisfaction guarantee

Should your Braun product require service,

please call 1-800-BRAUN 11 (272-8611) in the US or

1-800-387-6657 in Canada to be referred to the Authorized

Braun Service Center closest to you.

To obtain service:

A. Carry the product in to the Authorized Braun Service Center

of your choice or,

B. Ship the product to the Authorized Braun Service Center

of your choice.

Pack the product well.

Ship the product prepaid and insured (recommended).

Include a copy of your proof of purchase to verify warranty

coverage, if applicable.

To obtain original Braun replacement parts and accessories:

Contact a Braun Authorized Service Center.

Please call 1-800-BRAUN 11 (272-8611) in the US or

1-800-387-6657 in Canada to be referred to the Authorized

Braun Service Center closest to you.

To speak to a Braun Consumer Service Representative:

Please call 1-800-BRAUN 11 (272-8611) in the US or

1-800-387-6657 in Canada.

96730388_797cc-7_NA_S4-50.indd 1596730388_797cc-7_NA_S4-50.indd 15 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 15 of 50

60 day money back satisfaction guarantee

for men’s grooming products

Braun Shavers

Braun Beard Trimmers

Once you have tried your new Braun shaver or beard trimmer, we

are confident you will appreciate its performance. We suggest

using the product regularly for 2 to 3 weeks. If you are not satisfied

with the product, please call 1-800-211-6661 for instructions on

how to return the product. Return the unit and all parts within

60 days of purchase. Retain original cash receipt, product and all

product parts, including the box. Do not return to the retailer for

guarantee fulfillment.

Please note: No refunds will be made for any product damaged by

accident, neglect or unreasonable use.

Your product must be shipped in its original packaging, with your

original sales slip indicating the date of purchase.

Please include the following information when you return your

product:

Name

Street

City

State Zip code

Telephone number

Please allow 6-8 weeks for handling.

96730388_797cc-7_NA_S4-50.indd 1696730388_797cc-7_NA_S4-50.indd 16 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 16 of 50

FOR USA ONLY

2 year limited warranty

(foil and cutter cassette excluded)

Braun warrants this Braun shaver (except foil and cutter cassette)

to be free of defects in material and workmanship for a period of

two years from the date of original purchase.

If the shaver exhibits such a defect, Braun will, at its option, either

repair or replace it for the consumer without charge.

Please call 1-800-Braun 11 (800-272-8611) to be referred to the

authorized Braun Service Center closest to you.

This warranty does not cover foil and cutter cassette or damage

resulting from accident, misuse, abuse, dirt, water, tampering,

unreasonable use, normal wear, servicing performed or attempted

by unauthorized service agencies or failure to provide reasonable

and necessary maintenance, including recharging.

ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO

2 YEARS FROM DATE OF ORIGINAL PURCHASE. IN NO EVENT

WILL BRAUN BE RESPONSIBLE FOR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental

or consequential damages, so the above limitation or exclusion

may not apply to you.

This warranty gives you specific legal rights, and you may also

have other legal rights which vary from state to state.

96730388_797cc-7_NA_S4-50.indd 1796730388_797cc-7_NA_S4-50.indd 17 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 17 of 50

FOR CANADA ONLY

2 year limited warranty

(foil and cutter cassette excluded)

In the event a Braun Shaver fails to function within 2 years from

date of purchase, because of defects in material or workmanship,

and the consumer returns the unit to an authorized service center,

Braun Canada, will, at its option, either repair or replace the unit

without additional charge to the consumer.

This guarantee does not cover any product, which has been

damaged by dropping, tampering, wrong current, servicing

performed or attempted by unauthorized service agencies, misuse

or abuse, kinks in the shaver foil as well as the normal wear of

the shearing parts.

Exclusion of Warranties: The foregoing warranty is the sole

warranty offered by Braun Canada. Braun Canada hereby

disclaims any implied warranty or merchantability or fitness for any

particular purpose. In no event will Braun Canada be responsible

for consequential damages resulting from the use of this product.

96730388_797cc-7_NA_S4-50.indd 1896730388_797cc-7_NA_S4-50.indd 18 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 18 of 50

Français

CONSIGNES DE SÉCURITÉ

IMPORTANTES

Lors de l’utilisation d’appareils électriques, toujours prendre les

mesures de sécurité de base suivantes :

Lire toutes les directives avant d’utiliser cet appareil.

Lorsqu’elle est débranchée, la partie de cet appareil que

l’on tient dans la main peut être utilisée dans le bain ou

sous la douche. Pour des raisons de sécurité, cet appareil

ne peut être utilisé avec un cordon d’alimentation.

DANGER

Pour réduire les risques de choc électrique :

1. Ne pas utiliser le bloc chargeur en prenant son bain ou sa

douche.

2. Ne pas toucher l’appareil s’il est tombé dans l’eau. Le

débrancher immédiatement.

3. Ne pas placer, ranger ou recharger l’appareil à un endroit d’où

il pourrait tomber ou glisser dans une baignoire ou un lavabo.

Ne pas immerger dans l’eau ni dans aucun autre liquide.

4. Sauf dans le cas d’une recharge, toujours débrancher l’appareil

de la prise électrique immédiatement après l’utilisation.

5. Cet appareil comprend un cordon spécial muni d’un dispositif

de sécurité intégré assurant une alimentation à très basse

tension. Aucune pièce de ce dispositif ne doit être remplacée

ou manipulée.

6. Ne pas utiliser de rallonge pour faire fonctionner cet appareil.

CONSERVER CES CONSIGNES

96730388_797cc-7_NA_S4-50.indd 1996730388_797cc-7_NA_S4-50.indd 19 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 19 of 50

MISE EN GARDE

Pour réduire les risques de brûlure, d’incendie, de choc électrique

ou de blessure, suivre les directives suivantes :

1. L’utilisation de cet appareil par un jeune enfant ou une

personne handicapée, ou en présence de ces derniers, doit

être faite sous étroite supervision.

2. Ne pas utiliser cet appareil à des fins autres que celles

indiquées dans ce manuel. Ne pas utiliser d’accessoires non

recommandés par le fabricant.

3. Ne jamais utiliser cet appareil si la prise ou le cordon sont

endommagés, s’il ne fonctionne pas correctement, s’il est

tombé, s’il a été endommagé ou si le bloc d’alimentation

a été échappé dans l’eau. Retourner l’appareil à un centre

de services autorisé pour qu’il soit examiné et réparé.

4. Tenir le cordon loin des surfaces chauffantes.

5. Ne jamais laisser tomber l’appareil ni insérer d’objets dans les

orifices.

6. Ne pas utiliser à l’extérieur, dans un endroit où des produits en

aérosol (vaporisateurs) sont utilisés ni là où l’on administre de

l’oxygène.

7. Ne pas utiliser cet appareil si sa grille est endommagée ou

brisée; cela pourrait entraîner des blessures graves au visage.

8. Toujours relier la fiche à l’appareil avant de brancher à la prise

électrique. Pour débrancher, placer tous les interrupteurs à la

position d’arrêt, puis retirer la fiche de la prise.

9. Pour brancher à une prise électrique à l’extérieur de

l’Amérique du Nord, utiliser une fiche d’adaptation conforme

à la configuration des broches de la prise.

10. Mise en garde : La pile qui se trouve dans cet appareil peut

causer un incendie ou une brûlure chimique si elle n’est pas

utilisée adéquatement. Ne pas la désassembler ni l’exposer à

des températures supérieures à 100 ºC (212 ºF) ni la jeter au

feu.

11. Utiliser seulement le cordon d’alimentation spécial fourni avec

l’appareil.

CONSERVER CES CONSIGNES

96730388_797cc-7_NA_S4-50.indd 2096730388_797cc-7_NA_S4-50.indd 20 18.12.13 13:0318.12.13 13:03

CSS APPROVED Effective Date 14Jan2014 GMT - Printed 29Sep2015 Page 20 of 50

La page charge ...

Braun 797cc-7 Wet & Dry, Series 7 Manuel utilisateur

Marque: Braun

Modèle: 797cc-7 Wet & Dry, Series 7

Catégorie: Rasoirs pour hommes

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Braun 797cc-7 Wet & Dry, Series 7 User manual
español: Braun 797cc-7 Wet & Dry, Series 7 Manual de usuario

Braun 797cc-7 Wet & Dry, Series 7 Manuel utilisateur

Braun 797cc-7 Wet & Dry, Series 7 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents