Electrolux ESF5201LOW Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur

Ce manuel convient également à

ESF5201LOW
ESF5201LOX
EN Dishwasher User Manual 2
ET Nõudepesumasin Kasutusjuhend 21
FR Lave-vaisselle Notice d'utilisation 40
CONTENTS
1. SAFETY INFORMATION....................................................................................3
2. SAFETY INSTRUCTIONS..................................................................................4
3. PRODUCT DESCRIPTION................................................................................ 6
4. CONTROL PANEL............................................................................................. 7
5. PROGRAMMES................................................................................................. 8
6. SETTINGS..........................................................................................................9
7. BEFORE FIRST USE....................................................................................... 10
8. DAILY USE....................................................................................................... 11
9. HINTS AND TIPS............................................................................................. 13
10. CARE AND CLEANING..................................................................................14
11. TROUBLESHOOTING....................................................................................16
12. TECHNICAL INFORMATION......................................................................... 19
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
www.electrolux.com2
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged 8 years
and above and by persons with reduced capabilities
provided that they have been given instruction and/or
supervision regarding the safe use of the appliance
and understand the potential hazards involved.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance door
when it is open.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
This appliance is intended to be used in household
and similar applications such as:
farm houses; staff kitchen areas in shops, offices
and other working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments.
Do not change the specification of this appliance.
The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar
(MPa)
Obey the maximum number of 13 place settings.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
ENGLISH 3
Put knives and cutlery with sharp points in the cutlery
basket with the points down or in a horizontal position.
Do not keep the appliance door open without
supervision to prevent to fall on it.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
The ventilation openings in the base (if applicable)
must not be obstructed by a carpet.
The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2. SAFETY INSTRUCTIONS
2.1 Installation
Remove all the packaging.
Do not install or use a damaged
appliance.
Do not install or use the appliance
where the temperature is less than 0
°C.
Follow the installation instruction
supplied with the appliance.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
The appliance must be earthed.
Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
This appliance complies with the
E.E.C. Directives.
Only for UK and Ireland. The
appliance has a 13 amp mains plug. If
it is necessary to change the fuse in
the mains plug, use fuse: 13 amp
ASTA (BS 1362).
2.3 Water connection
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
www.electrolux.com4
The water inlet hose has a safety
valve and a sheath with an inner
mains cable.
WARNING!
Dangerous voltage.
If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.
2.4 Use
Do not sit or stand on the open door.
Dishwasher detergents are
dangerous. Obey the safety
instructions on the detergent
packaging.
Do not drink and play with the water in
the appliance.
Do not remove the dishes from the
appliance until the programme is
completed. There can be detergent on
the dishes.
The appliance can release hot steam
if you open the door while a
programme operates.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
2.5 Service
Contact the Authorised Service
Centre to repair the appliance. We
recommend only the use of original
spare parts.
When you contact the Authorised
Service Centre, ensure that you have
the following information that is
available on the rating plate.
Model :
PNC :
Serial Number :
2.6 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent
children and pets to get closed in the
appliance.
ENGLISH 5
3. PRODUCT DESCRIPTION
5
4
8
10
9
11
67
12
2
3
1
1
Worktop
2
Upper spray arm
3
Lower spray arm
4
Filters
5
Rating plate
6
Salt container
7
Air vent
8
Rinse aid dispenser
9
Detergent dispenser
10
Cutlery basket
11
Lower basket
12
Upper basket
www.electrolux.com6
4. CONTROL PANEL
1 2 3
456
1
On/off indicator
2
Programme marker
3
Indicators
4
Delay button
5
Start button
6
Programme knob
4.1 Indicators
Indicator Description
Washing phase. It comes on when the washing phase operates.
Drying phase. It comes on when the drying phase operates.
End indicator.
Rinse aid indicator. It is always off while the programme operates.
Salt indicator. It is always off while the programme operates.
ENGLISH 7
5. PROGRAMMES
Programme Degree of soil
Type of load
Programme
phases
Consumption values
1)
Duration
(min)
Energy
(kWh)
Water
(l)
2)
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
195 1.039 11
3)
Heavy soil
Crockery, cut‐
lery, pots and
pans
Prewash
Wash 70 °C
Rinses
Dry
150 - 170 1.5 - 1.6 13 - 15
Normal soil
Crockery and
cutlery
Prewash
Wash 65 °C
Rinses
Dry
120 - 130 1.3 - 1.6 15 - 17
4)
Fresh soil
Crockery and
cutlery
Wash 60 °C
or 65 °C
Rinses
30 0.8 9
5)
All Prewash 14 0.1 4
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
2)
With this programme you have the most efficient use of water and energy consumption
for crockery and cutlery with normal soil. (This is the standard programme for test institutes).
3)
This programme has a high temperature rising phase for better hygiene results. During
the rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
4)
With this programme you can wash a load with fresh soil. It gives good washing results in
a short time.
5)
Use this programme to quickly rinse the dishes. this prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance. Do not use detergent with
this programme.
5.1 Information for test
institutes
For all the necessary information for test
performance, send an email to:
Write down the product number (PNC)
that is on the rating plate.
www.electrolux.com8
6. SETTINGS
6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
The level of the water softener
according to the water hardness.
These settings will be saved until you
change them again.
How to set the programme
selection mode
The appliance is in programme selection
mode when the on/off indicator comes on
and start indicator starts to flash.
When you activate the appliance, usually
it is in programme selection mode.
However, if this does not happen, you
can set the programme selection mode
in the following way:
Press and hold simultaneously Start and
Delay until the appliance is in
programme selection mode.
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
German de‐
grees (°dH)
French de‐
grees (°fH)
mmol/l Clarke de‐
grees
Water softener
level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1)
Factory setting.
2)
Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill indicator active.
ENGLISH 9
Multi-tabs containing salt are
not effective enough to
soften hard water.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. Make sure that the programme
marker on the knob is aligned with
the indicator on/off .
2. To enter the user mode, press and
hold Delay. At the same time turn the
knob counterclockwise until the
programme marker is aligned with
the first programme. Release Delay
when the indicators Start and on/off
start to flash.
3. Press Delay.
The indicator starts to flash.
The indicators Start and on/off
continue to flash.
The intermittent flashing of
refers to the current set level, e.g.
5 flashes + pause + 5 flashes =
level 5.
4. Press Delay again and again to
change the setting. Each time you
press Delay the level number
increases. After level 10 you will start
again from level 1.
5. Turn knob to on/off position to
confirm the setting.
7. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
When you start a programme, the
appliance can take up to 5 minutes to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure will be repeated periodically.
7.1 The salt container
CAUTION!
Only use salt specifically
designed for dishwashers.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in the daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (Only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap of the salt container
clockwise to close the salt container.
www.electrolux.com10
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
7.2 How to fill the rinse aid
dispenser
A
B
D
C
M
A
X
1
2
3
4
+
-
A
B
D
C
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1. Press the release button (D) to open
the lid (C).
2. Pour the rinse aid in the dispenser
(A) until the liquid reaches the fill
level 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity (B)
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
8. DAILY USE
1. Open the water tap.
2. Turn the knob until the programme
marker is aligned with the
programme you want to set. Set the
correct programme for the type of
load and the degree of soil.
If the salt indicators is on, fill the
salt container.
If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
ENGLISH 11
8.1 Using the detergent
30
20
A BD
C
20
30
B
A D
C
1. Press the release button (B) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (D).
4. Close the lid. Make sure that the
release button locks into position.
8.2 Using the multi-tablets
When you use tablets, that contain salt
and rinse aid, do not fill the salt container
and the rinse aid dispenser.
1. Adjust the water softener to the
lowest level.
2. Set the rinse aid dispenser to the
lowest position.
8.3 Setting and starting a
programme
Starting a programme
1. Open the water tap.
2. Close the appliance door.
3. Turn the knob until the programme
marker is aligned with the
programme you want to set.
On/off indicator comes on.
Start indicator starts to flash.
4. Press Start.
The programme starts and the
indicator of the washing phase is
on.
On/off indicator and start indicator
are on.
Starting a programme with
delay start
1. Set the programme.
2. Press Delay to delay the start of the
programme of 3 hours.
The delay indicator comes on.
3. Press Start.
Start indicator comes on.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. It may
affect the energy consumption and the
programme duration. When you close
the door, the appliance continues from
the point of interruption.
Cancelling the delay start while
the countdown operates
1. Press and hold Start and Delay until
the start indicator starts to flash.
2. Press Start to start the programme.
www.electrolux.com12
Cancelling the programme
Press and hold Start and Delay until the
start indicator starts to flash.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
End of the programme
When the programme is completed the
indicator is on. If you do not
deactivate the appliance within 5 minutes
all indicators goes off. This helps to
decrease energy consumption.
1. To deactivate the appliance, turn the
knob until the programme marker is
aligned with the on/off indicator.
2. Close the water tap.
9. HINTS AND TIPS
9.1 General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the environment.
Remove larger residues of food from
the dishes into the waste bin.
Do not pre-rinse dishes by hand.
When needed, use the prewash
programme (if available) or select a
programme with a prewash phase.
Always use the whole space of the
baskets.
When loading the appliance, make
sure that the dishes can be
completely reached and washed by
the water released from the spray arm
nozzles. Make sure that items do not
touch or cover each other.
You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''3in1'',
''4in1'', ''All in 1''). Follow the
instructions written on the packaging.
Select the programme according to
the type of load and degree of soil.
With the ECO programme you have
the most efficient use of water and
energy consumption for crockery and
cutlery with normal soil.
9.2 Using salt, rinse aid and
detergent
Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
In areas with hard and very hard
water we recommend to use solo-
detergent (powder, gel, tablets without
additional functions), rinse aid and
salt separately for optimal cleaning
and drying results.
At least once a month run the
appliance with the use of appliance
cleaner which is particularly suitable
for this purpose.
Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the
tablets with long programmes.
Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
9.3 What to do if you want to
stop using multi-tablets
Before you start to use separately
detergent, salt and rinse aid do the
following procedure.
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4. When the programme is completed,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
ENGLISH 13
9.4 Loading the baskets
Only use the appliance to wash items
that are dishwasher-safe.
Do not put in the appliance items
made of wood, horn, aluminium,
pewter and copper.
Do not put in the appliance items that
can absorb water (sponges,
household cloths).
Remove larger residues of food from
the dishes into the waste bin.
Make soft the remaining burned food
on the items.
Put hollow items (cups, glasses and
pans) with the opening down.
Make sure that glasses do not touch
other glasses.
Put cutlery and small items in the
cutlery basket.
Put light items in the upper basket.
Make sure that the items do not
move.
Make sure that the spray arms can
move freely before you start a
programme.
9.5 Before starting a
programme
Make sure that:
The filters are clean and correctly
installed.
The cap of the salt container is tight.
The spray arms are not clogged.
There is dishwasher salt and rinse aid
(unless you use multi- tablets).
The position of the items in the
baskets is correct.
The programme is applicable for the
type of load and for the degree of soil.
The correct quantity of detergent is
used.
9.6 Unloading the baskets
1. Let the tableware cool down before
you remove it from the appliance. Hot
items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
At the end of the program
water can still remain on the
sides and on the door of the
appliance.
10. CARE AND CLEANING
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Dirty filters and clogged
spray arms decrease the
washing results. Make a
check regularly and, if
necessary, clean them.
10.1 Cleaning the filters
The filter system is made of 3 parts.
C
B
A
1. Turn the filter (B) counterclockwise
and remove it.
www.electrolux.com14
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
10.2 Cleaning the spray arms
Do not remove the spray arms. If the
holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
10.3 External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents.
Do not use abrasive products,
abrasive cleaning pads or solvents.
10.4 Internal cleaning
Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
ENGLISH 15
If you regularly use short duration
programmes, these can leave
deposits of grease and limescale
inside the appliance. To prevent this,
we recommend to run long duration
programmes at least 2 times per
month.
To maintain the performance of your
appliance at its best, we recommend
to use monthly a specific cleaning
product for dishwashers. Follow
carefully the instructions on the
packaging of the product.
11. TROUBLESHOOTING
If the appliance does not start or it stops
during operation, before you contact an
Authorised Service Centre, check if you
can solve the problem by yourself with
the help of the information in the table.
WARNING!
Repairs not properly done
may result in serious risk to
the safety of the user. Any
repairs must be performed
by qualified personnel.
With some problems the end indicator
flashes intermittently indicating a
malfunction.
The majority of problems that can
occur can be solved without the need
to contact an Authorised Service
Centre.
Problem and alarm code Possible cause and solution
You cannot activate the appliance. Make sure that the mains plug is connected
to the mains socket.
Make sure that there is no damaged fuse in
the fuse box.
The programme does not start. Make sure that the appliance door is closed.
Press Start.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance has started the procedure to
recharge the resin inside the water softener.
The duration of the procedure is approxi‐
mately 5 minutes.
The appliance does not fill with wa‐
ter.
The end indicator flashes 1 time
intermittently.
The Start indicator flashes con‐
tinuously.
Make sure that the water tap is open.
Make sure that the pressure of the water
supply is not too low. For this information,
contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is
not clogged.
Make sure that the inlet hose has no kinks
or bends.
www.electrolux.com16
Problem and alarm code Possible cause and solution
The appliance does not drain the
water.
The end indicator flashes 2 times
intermittently.
The Start indicator flashes con‐
tinuously.
Make sure that the sink spigot is not clog‐
ged.
Make sure that the drain hose has no kinks
or bends.
The anti-flood device is on.
The end indicator flashes 3 times
intermittently.
The Start indicator flashes con‐
tinuously.
Close the water tap and contact an Author‐
ised Service Centre.
The appliance stops and starts
more times during operation.
It is normal. It provides optimal cleaning re‐
sults and energy savings.
The program lasts too long. If the delayed start option is set, cancel the
delay setting or wait for the end of the
countdown.
Small leak from the appliance door. The appliance is not levelled. Loosen or
tighten the adjustable feet (if applicable).
The appliance door is not centred on the
tub. Adjust the rear foot (if applicable).
The appliance door is difficult to
close.
The appliance is not levelled. Loosen or
tighten the adjustable feet (if applicable).
Parts of the tableware are protruding from
the baskets.
Rattling/knocking sounds from in‐
side the appliance.
The tableware is not properly arranged in
the baskets. Refer to basket loading leaflet.
Make sure that the spray arms can rotate
freely.
The appliance trips the circuit-beak‐
er.
The amperage is insufficient to supply si‐
multaneously all the appliances in use.
Check the socket amperage and the capaci‐
ty of the meter or turn off one of the applian‐
ces in use.
Internal electrical fault of the appliance.
Contact an Authorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
press Start. If the problem occurs again,
contact an Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
ENGLISH 17
11.1 The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and basket
loading leaflet.
Use more intensive washing programmes.
Clean spray arm jets and filter. Refer to "Care and
Cleaning".
Poor drying results. Tableware has been left for too long inside a
closed appliance.
There is no rinse aid or the dosage of rinse aid is
not enough. Set the rinse aid dispenser to a higher
level.
Plastic items may need to be towel dried.
We recommend to always use rinse aid, even in
combination with multi-tablets.
There are whitish streaks or
bluish layers on glasses and
dishes.
The release quantity of rinse aid is too much. Ad‐
just the rinse aid level to a lower level.
The quantity of detergent is too much.
There are stains and dry wa‐
ter drops on glasses and
dishes.
The released quantity of rinse aid is not sufficient.
Adjust the rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
The dishes are wet. The programme does not have a drying phase or
has a drying phase with low temperature.
The rinse aid dispenser is empty.
The quality of the rinse aid can be the cause.
The quality of the multi-tablets can be the cause.
Try a different brand or activate the rinse aid dis‐
penser and use rinse aid and multi-tablets together.
Keep the dishwasher door ajar for some time be‐
fore removing tableware.
The interior of the appliance
is wet.
This is not a defect of the appliance. it is caused by
the humidity in the air that condenses on the walls.
Unusual foam during wash‐
ing.
Use the detergent for dishwashers only.
There is a leak in the rinse aid dispenser. Contact
an Authorised Service Centre.
Traces of rust on cutlery. There is too much salt in the water used for wash‐
ing. Refer to "The water softener".
Silver and stainless steel cutlery were placed to‐
gether. Avoid to put silver and stainless steel items
close together.
www.electrolux.com18
Problem Possible cause and solution
There are residues of deter‐
gent in the dispenser at the
end of the programme.
The detergent tablet got stuck in the dispenser and
therefore was not completely washed away by wa‐
ter.
Water cannot wash away the detergent from the
dispenser. Make sure that the spray arm is not
blocked or clogged.
Make sure that items in the baskets do not impede
the lid of the detergent dispenser from opening.
Odours inside the appliance. Refer to "Internal cleaning".
Limescale deposits on the
tableware, on the tub and on
the inside of the door.
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water soft‐
ener".
Even using multi-functional tabs use salt and set
regeneration of the water softener. Refer to "The
water softener".
If lime scale deposits still remain, clean the appli‐
ance with appliance cleaners which are particularly
suitable for this purpose.
Try different detergent.
Contact the detergent manufacturer.
Dull, discoloured or chipped
tableware.
Make sure that only dishwasher-safe items are
washed in the appliance.
Load and unload the basket carefully. Refer to bas‐
ket loading leaflet.
Place delicate items in the upper basket.
Refer to "Before first use",
"Daily use" or "Hints and
tips" for other possible
causes.
12. TECHNICAL INFORMATION
Dimensions Width / height / depth
(mm)
600 / 850 / 625
Electrical connection
1)
Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Water supply
Cold water or hot water
2)
max 60 °C
Capacity Place settings 13
ENGLISH 19
Power consumption Left-on mode (W) 5.0
Power consumption Off-mode (W) 0.50
1)
Refer to the rating plate for other values.
2)
If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian ener‐
gy), use the hot water supply to decrease energy consumption.
13. ENVIRONMENT CONCERNS
Please recycle all materials marked with
the symbol . Dispose of all packaging
materials appropriately and help to
protect the environment, and future
generations. Do not dispose of electrical
equipment marked with the symbol
along with the general house hold waste.
Dispose all electrical goods via
applicable local authority collections, or
at local authority or, commercial recycling
centres.
www.electrolux.com20
1 / 1

Electrolux ESF5201LOW Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur
Ce manuel convient également à