Yamaha M8x Guide de démarrage rapide

Marque: Yamaha

Modèle: M8x

Taper: Guide de démarrage rapide

Ce manuel convient également à

EnglishFrançaisEspañol

MUSIC SYNTHESIZER

SYNTHÉTISEUR MUSICAL

SINTETIZADOR MUSICAL

Quick Guide

Guide rapide

Guía rápida

S1 MONTAGE M Quick Guide

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

 Thisproduct,wheninstalledasindicatedintheinstructionscontainedinthismanual,meetsFCCrequirements.Modications

not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2 . I MP OR TA NT: When connecting this product to accessories and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of

this product in a residential environment will not result in harmful interference with other electronic devices. This equipment

generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may

cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

-Relocateeitherthisproductorthedevicethatisbeingaectedbytheinterference.

-Utilizepoweroutletsthatareondierentbranch(circuitbreakerorfuse)circuitsorinstallAClinelter/s.

- In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute

this type of product. If you cannot locate the appropriate retailer, please contact Yamaha Corporation of America, 6600

OrangethorpeAve.,BuenaPark,CA90620,USA.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

(529-M04FCCclassBYCA01)

COMPLIANCE INFORMATION STATEMENT

(Supplierʼs declaration of conformity procedure)

Responsible Party: Yamaha Corporation of America

 Address: 6600OrangethorpeAve.BuenaParkCalif.90620

 Telephone: 714-522-9011

Type of Equipment: Music Synthesizer

Model Name: MONTAGE M6, MONTAGE M7, MONTAGE M8x

This device complies with Part 15 of the FCC Rules.

Operation is subject to two following conditions:

1)thisdevicemaynotcauseharmfulinterference,and

2)thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycauseundesiredoperation.

(529-M02FCCsdocYCA01)

IMPORTANT

Please record the serial number of this unit in the space below.

Model

Serial No.

Theserialnumberislocatedonthebottomorrearoftheunit.RetainthisQuickGuideinasafeplaceforfuturereference.

*ThisappliesonlytoproductsdistributedbyYAMAHACORPORATIONOFAMERICA. (84-M01Ser.No)

MONTAGE M Quick Guide

Information for users on collection and disposal of old equipment:

Thissymbolontheproducts,packaging,and/oraccompanyingdocumentsmeansthatusedelectricaland

electronic products should not be mixed with general household waste.

Forpropertreatment,recoveryandrecyclingofoldproducts,pleasetakethemtoapplicablecollectionpoints,in

accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negativeeectsonhumanhealthandtheenvironmentwhichcouldotherwisearisefrominappropriatewaste

handling.

For more information about collection and recycling of old products, please contact your local municipality, your

waste disposal service or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local

authoritiesordealerandaskforthecorrectmethodofdisposal.

(58-M02WEEEen01)

2MONTAGE M Quick Guide

Power supply

• Donotplacethepowercordnearheatsourcessuchas

heatersorradiators.Also,donotexcessivelybendor

otherwisedamagethecord,orplaceheavyobjectsonit.

• Donottouchtheproductorthepowerplugduringan

electricalstorm.

• Useonlythecorrectvoltagespeciedfortheproduct.

Therequiredvoltageisprintedonthenameplateofthe

product.

• Useonlythesuppliedpowercord/plug.Donotusethe

powercord/plugforotherdevices.

• Checkthepowerplugperiodicallyandremoveanydirtor

dustwhichmayhaveaccumulatedonit.

• InsertthepowerplugrmlyallthewayintotheACoutlet.

Usingtheproductwhenitisnotpluggedinsuciently

cancausedusttoaccumulateontheplug,possibly

resultinginreorskinburns.

• Whensettinguptheproduct,makesurethattheAC

outletyouareusingiseasilyaccessible.Ifsometroubleor

malfunctionoccurs,immediatelyturnothepowerswitch

anddisconnecttheplugfromtheoutlet.Evenwhenthe

powerswitchisturnedo,aslongasthepowercordisnot

unpluggedfromthewallACoutlet,theproductwillnot

bedisconnectedfromthepowersource.

• Donotconnecttheproducttoanelectricaloutletusing

amulti-plugoutletextender.Doingsocanresultinlower

soundquality,orpossiblycauseoverheatingintheoutlet.

• Whendisconnectingthepowerplug,alwaysholdtheplug

itselfandnotthecord.Pullingbythecordcandamageit

andcauseelectricshocksorare.

• Ifnotusingtheproductforlongperiodsoftime,besure

topullthepowerplugfromtheACoutlet.

• Besuretoconnecttoanappropriateoutletwitha

protectivegroundingconnection.Impropergrounding

canresultinelectricalshock.

Do not disassemble

• Thisproductcontainsnouser-serviceableparts.Donot

attempttodisassembletheinternalpartsormodifythem

inanyway.

Water warning

• Donotexposetheproducttorain,useitnearwateror

indamporwetconditions,orplaceonitanycontainers

(suchasvases,bottlesorglasses)containingliquidswhich

mightspillintoanyopeningsorplaceswherewatermay

drop.Aliquidsuchaswatergettingintotheproductmay

causeare,electricshocks,ormalfunctions.

• Neverinsertorremoveapowerplugwithwethands.

Fire warning

• Donotplaceanyburningitemsoropenamesnearthe

product,sincetheymaycauseare.

If you notice any abnormality

• Ifanyofthefollowingproblemsoccur,immediatelyturn

othepowerswitchanddisconnectthepowerplugfrom

theoutlet.

FinallyhavethedeviceinspectedbyYamahaservice

personnel.

- Thepowercordorplugbecomesfrayedordamaged.

- Unusualsmellsorsmokeareemitted.

- Someobject,orwaterhasbeendroppedintothe

product.

- Thereisasuddenlossofsoundduringuseofthe

product.

- Cracksorothervisibledamageappearontheproduct.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Pleasekeepthismanualinasafeandhandyplaceforfuturereference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from

electrical shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited

to, the following:

MONTAGE M Quick Guide

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or

damage to the product or other property. These precautions include, but are not limited to, the following:

Location

• Donotplacetheproductinanunstablepositionor

alocationwithexcessivevibration,whereitmight

accidentallyfalloverandcauseinjury.

• Donotgoneartheproductduringanearthquake.Strong

shakingduringanearthquakecouldcausetheproductto

moveortipover,resultingindamagetotheproductorits

parts,andpossiblycausinginjury.

• Whentransportingormovingtheproduct,alwaysusetwo

ormorepeople.Attemptingtolifttheproductbyyourself

mayresultininjuries,suchasbackinjuries,orcausethe

producttobedroppedandbroken,whichcouldleadto

otherinjuries.

• Beforemovingtheproduct,removeallconnectedcables,

topreventdamagetothecablesorinjurytoanyonewho

mighttripoverthem.

Connections

• Beforeconnectingtheproducttootherelectronic

components,turnothepowerforallcomponents.

Beforeturningthepoweronoroforallcomponents,set

allvolumelevelstominimum.

• Besuretosetthevolumesofallcomponentsattheir

minimumlevelsandgraduallyraisethevolumecontrols

whileplayingtheproducttosetthedesiredlisteninglevel.

Handling

• Donotinsertforeignmaterialssuchasmetalorpaperinto

anyopeningsorgapsoftheproduct.Failuretoobserve

thismaycauseare,electricshocks,ormalfunctions.

• Donotrestyourweighton,orplaceheavyobjectsonthe

product,anddonotuseexcessiveforceonthebuttons,

switchesorconnectors.

• Donotusetheproductorheadphonesforalongperiod

oftimeatahighoruncomfortablevolumelevel,sincethis

cancausepermanenthearingloss.Ifyouexperienceany

hearinglossorringingintheears,consultaphysician.

• RemovethepowerplugfromtheACoutletbefore

cleaningtheunit.Failuretoobservethismaycause

electricshocks.

Yamahacannotbeheldresponsiblefordamagecausedbyimproperuseormodicationstotheproduct,ordatathatislost

ordestroyed.

Alwaysturnthepowerowhentheproductisnotinuse.

(D M I -11)

English

4MONTAGE M Quick Guide

NOTICE

Toavoidthepossibilityofmalfunction/damagetothe

product,damagetodata,ordamagetootherproperty,

followthenoticesbelow.

Handling

• DonotusethisproductinthevicinityofaTV,radio,stereo

equipment,mobilephone,orotherelectricdevices.

Otherwise,thisproduct,TV,orradiomaygeneratenoise.

• Whenyouusetheproductalongwithanapponyour

smartdevice,suchasasmartphoneortablet,we

recommendthatyouenable“AirplaneMode”onthe

devicetoavoidnoisecausedbycommunication.

• Donotexposetheproducttoexcessivedustorvibrations,

orextremecoldorheat(suchasindirectsunlight,neara

heater,orinacarduringtheday)topreventthepossibility

ofdisguration,damagetotheinternalcomponentsor

unstableoperation.

• Donotplacevinyl,plasticorrubberobjectsonthe

product,sincethismightdiscolortheproduct.

Maintenance

• Whencleaningtheproduct,useasoftanddry/slightly

dampcloth.Donotusepaintthinners,solvents,alcohol,

cleaninguids,orchemical-impregnatedwipingcloths.

Saving data

• EditedPerformance

EditedPerformanceislostwhenyouturnothepower

totheproductwithoutstoringit.Thisalsooccurswhen

thepoweristurnedobytheAutoPowerOfunction

(page31).

• Othersettings

Othersettingsareretainedwhenthepoweristurnedo.

• Tosaveimportantsettings

KeepinmindthatPerformancesandothersettingssaved

totheproductmayoccasionallybelostduetosome

failure,anoperationmistake,etc.Forthisreason,you

shouldsaveyourimportantsettingsontoaUSBashdrive

(refertotheOperationManual).BeforeusingaUSBash

drive,makesuretoseepage32.

Information

About copyrights

Thecopyrightofthe“content”*1installedinthisproduct

belongstoYamahaCorporationoritscopyrightholder.

Exceptaspermittedbycopyrightlawsandotherrelevant

laws,suchascopyingforpersonaluse,itisprohibited

to“reproduceordivert”*2withoutthepermissionofthe

Ifyoucreatemusicorperformwiththecontentsthroughthe

originaluseoftheproduct,andthenrecordanddistribute

them,thepermissionofYamahaCorporationisnotrequired

regardlessofwhetherthedistributionmethodispaidorfree

ofcharge.

*1:Theword“content”includesacomputerprogram,audiodata,

AccompanimentStyledata,MIDIdata,waveformdata,voice

recordingdata,musicscore,andscoredata,etc.

*2:Thephrase“reproduceordivert”includestakingoutthecontent

itselfinthisproduct,orrecordinganddistributingitwithout

changesinasimilarmanner.

About this manual

• TheillustrationsandLCDscreensasshowninthismanual

areforinstructionalpurposesonly.

• Unlessindicatedotherwise,theillustrationsandscreensas

showninthismanualarebasedontheMONTAGEM6(in

English).

• Thecompanynamesandproductnamesinthismanual

arethetrademarksorregisteredtrademarksoftheir

respectivecompanies.

About disposal

Whendisposingofthisproduct,pleasecontactthe

appropriatelocalauthorities.

MONTAGE M Quick Guide

MEMO

6MONTAGE M Quick Guide

Welcome

ThankyouforpurchasingthisYamahaMusicSynthesizer!

Thisagshipmodelsynthesizercomeswithmultiplesoundenginesthatmaketheinstrumentpowerfulandversatileforall

musicgenres.Werecommendthatyoureadthismanualcarefullysothatyoucanfullytakeadvantageoftheadvancedand

convenientfunctionsofthisinstrument.Wealsorecommendthatyoukeepthismanualinasafeandhandyplaceforfuture

reference.

About the manuals

Thesetofdocumentslistedbelowareincludedwiththisinstrument.

Printed manual included with this product

Quick Guide (this book)

Providesexplanationsforthebasicfunctionsoftheinstrument.

Website-based manuals

ThemanualsprovidedonthewebsitecanbedownloadedfromtheYamahaDownloads.ConnecttotheInternetandenterthe

modelname"MONTAGEM"intheModelNameorKeywordsearchboxandclickSearch.

Yamaha Downloads

https://download.yamaha.com/

Operation Manual (HTML)

Providesinstructionsonoperatingtheinstrument,aswellasdetailedinformationontheinternalstructureandconnection

ofotherinstrumentsanddevices.

https://manual.yamaha.com/mi/synth/montage_m/index_q.html

Data List (.xlsx and .pdf)

ThislecontainsvariousimportantlistssuchasthePerformancelist,Eecttypelist,Waveformlist,Arpeggiotypelist,and

MIDIimplementationchart.

Included accessories

• Powercord(×1)

• Quickguide(thisbook)

• Cubase AI Download Information

• Expanded Softsynth Plugin for MONTAGE M download information

MONTAGE M Quick Guide

About rmware updates

Toimplementnewfunctionsandimproveoperability,thisinstrumentmaybeshippedwithanupdatedversionofthermware

installed.

Themanualfortheupdatedversionofthermwarecanbedownloadedfromthewebsitebelow.

Yamaha Downloads:https://download.yamaha.com/

Thermwareversionofyourkeyboardcanbecheckedvia[UTILITY]gSettingsgSystem.

Notation in this document

Model name

Inthisdocument,MONTAGEM6,MONTAGEM7,andMONTAGEM8xarecollectivelycalledthe“MONTAGEM.”

NOTE

"NOTE"indicatessupplementarydescriptions.

8MONTAGE M Quick Guide

Contents

PRECAUTIONS ..................................................................2

NOTICE ........................................................................4

Information ....................................................................4

Welcome .......................................................................6

About the manuals .............................................................6

Printedmanualincludedwiththisproduct...................................................... 6

Website-basedmanuals......................................................................... 6

Included accessories ............................................................6

About rmware updates ........................................................7

Notation in this document ......................................................7

Features .......................................................................9

WhatistheMotionControlSynthesisEngine? ................................................... 9

Basic Performance structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

How Live Set works ............................................................11

LiveSetbank.................................................................................. 11

Panel controls and functions ...................................................12

Toppanel......................................................................................12

Rearpanel.....................................................................................26

Setting up .....................................................................30

Powersupply..................................................................................30

Connectingspeakersorheadphones...........................................................30

TurningtheinstrumentON

TurningtheinstrumentOFF....................................................................31

AutoPowerOfunction.......................................................................31

Adjustingthemastervolume..................................................................32

PanelLockfeature.............................................................................32

UsingUSBashdrives..........................................................................32

Preparation for live performance ...............................................33

Status check and basic operation ...............................................34

Checkingthestatus............................................................................34

Openingsettingscreens.......................................................................38

Movingthecursorandchangingparametervalues.............................................39

Iconsshownforspecicoperations ............................................................40

Enteringcharactersandnumbers ..............................................................41

Playing the keyboard ..........................................................44

SelectingaPerformancefromtheLiveSetscreen...............................................44

Troubleshooting ...............................................................45

Restoringthefactorydefaultsettings(InitializeAllData)........................................45

Specications .................................................................46

Index .........................................................................47

MONTAGE M Quick Guide

Features

TheMONTAGEMsynthesizersfeaturethebuilt-inMotion Control Synthesis Engine,lettingyoucreateenormouslycomplex,

multi-texturedsoundsbycombiningAWM2,FM-X,andAN-Xsynthesisenginesseamlesslyandfurthermodifyingthesound

usingMotioncontrol.Therefore,youcanusetheMONTAGEM,notjustforrecreatingconventionalsounds,butalsoforcreating

completelynewsounds.

What is the Motion Control Synthesis Engine?

Thisisapowerfullycomprehensivesynthesissystemthatusesahybrid,multi-tone-generatorsoundengine,andsophisticated

motioncontrolswithmultiplecontrolsourcesforcreatingcomplexandcontinuouslyshiftingsonictextures.

Hybrid sound engine

AWM2

Generatessoundsusingsoundles(orwave

les)sampledfromrealinstruments

FM-X

Generatessoundsbyusingthefrequenciesof

waveformstomodifyotherwaveforms

AN-X

Generatessoundsbymodifyingsimple

waveformsandapplying‘modeling’lters

Motion controls

Super Knob

Controlsmultipleparametersforcreating

multi-dimensionalsoundchanges

Motion Sequencer

Playsbackthemovementofthecontrollers

youhavesetbeforehandandchangesthe

soundsequentially

Envelope Follower

Generatessoundchangesthatsynchronizeto

thetempooftheinputaudio

10 MONTAGE M Quick Guide

Basic Performance structure

OntheMONTAGEM,thegroupofsettingsrelatedtoaspecicsoundiscalleda“Performance.”SelectthedesiredPerformance

andplaythekeyboard.

APerformancecanconsistofupto16Parts,withasoundassignedtoeachPart.



APerformancethatcontainsmultiplePartsiscalledaMulti-PartPerformance,whileaPerformancethatcontainsonlyonePartis

calledaSingle-PartPerformance.Single-PartPerformancescanbeusedinthesamewayasVoicesonAWM2synthesizers.

TherearefourtypesofParts.

Normal Parts (AWM2)

PartsplayedbytheAWM2soundengine.Aninstrumentsoundsuchaspiano,organ,guitar,andsynthesizercanbeassigned

toaPart.

Normal Parts (FM-X)

PartsplayedbytheFM-Xsoundengine.

Normal Parts (AN-X)

PartsplayedbytheAN-Xsoundengine.

Drum Parts (AWM2)

PartsplayedbytheAWM2soundengine.ApercussioninstrumentsoundcanbeassignedtothePart.TheDrumPartsare

usedforplayingrhythms.

NOTE

• Ifyouwishtocreatesoundsbyusingdefaultinitialvalues,selectanInitPerformance.

• Ifyouwishtousethisinstrumentasa16-partmultitimbraltonegenerator,usetheMulti/GMPerformances.ThesearePerformancesusingall

16parts,withthedrumsbeingassignedtoPart10.

PerformancesallowyoutoselectasoundforeachPartandcombinemultiplePartsinsophisticatedsplitandlayersettingsfor

playingonthekeyboard.Moreover,youcancreatecomplexsoundsbyeditingthePerformancesandPartsfromtheEditscreen

andenablingtheMotionControlsettings.

ThecreatedPerformancecanbesavedtointernalmemory,ortoUSBashdrivesconnectedtotheinstrument.Youcanalsouse

Soundmondo,asoundmanagementandsharingservice,tosavebackupsforyourselforshareyourPerformanceswithothers.

Soundmondo:https://www.yamaha.com/2/soundmondo

BycombiningtheExpanded Softsynth Plugin for MONTAGE M(thesoftwareversionoftheMONTAGEM)installedonthe

computerandthehardwareversionoftheMONTAGEM,youcancreateandmanagemanymorePerformances.Thesounds

youhaveusedinyourDAWformusicproductionandthesoundsyouhaveusedforliveperformancearesharedbetweenthe

softwareandhardwaresynthesizers.

Performance

Part1 Part2 Part3 Part4 Part5 Part6 Part16

MONTAGE M Quick Guide

How Live Set works

MONTAGEMseriessynthesizersfeatureapowerfulLiveSetfunctionforsavingandmanagingthePerformancesyou’vecreated.

TheLiveSetfunctionletsyouregisterthedesiredMIDIandaudiolestoplayalongwiththePerformancesyouwishtouseon

stage.

OntheLiveSetscreen,thereare16slotsperpageforsavingupto16setsofsettings.Forexample,youcanregisterthesame

PerformancewithdierentvolumesettingstovariousslotssothatyoucanchangethevolumeofthePerformanceasthesong

progresses.Thatwayyoucansimplytaptheslottoswitchtothenextvolumesettingasyouplaylive.

NOTE

AlinktotheselectedPerformanceissavedtoeachslot.WhenaPerformanceiseditedandstored,allslotsthathavethelinktothe

correspondingPerformancewillbeupdated.

Live Set bank

AbankisasetofLiveSetpagesusedformanagingPerformances.Eachbankhas16pagesofLiveSets.

Therearethreetypesofbanks:Preset,User,andLibrary.

Preset bank

ThebankforregisteredpresetPerformances.

AnyPerformancesinthePresetbankyouhaveeditedcannotbesavedbacktothePresetbank;theymustbesavedtoaUser

bank

NOTE

Refertothe“Data list”forthelistofPresetPerformances.

User bank

ThebankforregisteredPerformancesyou’veeditedyourself.NothingiscontainedinthisbankwhentheMONTAGEMis

shippedfromthefactory.

Thereareeightbanks(or128pages)available,allowingyoutoregisterupto2,048Performances.

YoucanarrangethePerformancesinyourowncustomorder—forexample,accordingtoasetlistinliveperformance

situations.

Library bank

ThebankforregisteredPerformancesfromtheLibraryles.NothingiscontainedinthisbankwhentheMONTAGEMis

shippedfromthefactory.

YoucanregisteroneLibraryleperbank.

LibrarylescanbedownloadedfromtheYamahawebsite.

WhenyourststartuptheMONTAGEM,theLiveSetscreenforthePresetbankwillbeshownontheMaindisplay.

Thestart-upscreencanbesettoaLiveSetorPerformancescreenasdesired([UTILITY]gSystem).

1Bank

Performance1 Performance2

Performance16

Page

Slot

Performance

Performancestoragearea

12 MONTAGE M Quick Guide

Panel controls and functions

Thissectionprovidesanoverviewofthepanelcontrolsandfunctions.

Top panel

Selecting a sound

  









Controllingparametersinrealtimeas

youplaythekeyboard,andadjusting

detailedparametervalues

Viewingthescreen,switchingsettings,

selectingitems,andenteringvalues

SelectingfunctionssuchasEditand

Utility

Selectingasound

Controllingthe

built-insequencer

Playingthekeyboard

MONTAGE M Quick Guide

1-1 [PERFORMANCE] button (INFO)

ThiscallsupthePerformancescreen.YoucanpressthisbuttontoswitchtoadierentPerformanceview.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforcheckingrelevantinformationfor

thePerformance(INFOscreen).

1-2 [LIVE SET] button (REGISTER)

ThiscallsuptheLiveSetscreen.YoucanpressthesamebuttontoselectadierentPerformancebank.

Pressthisbuttonandthentaptheslotonthetouchscreen,orusetheSlotnumberandCategorynameselection

buttonstoselectaslotfromtheLiveSetpagecurrentlyshownonthescreen.

Pressingthisbuttonwhileholdingthe[SHIFT]buttonopensthescreenforregisteringthecurrentPerformancetothe

LiveSetpage.DoingthisbeforehandallowsyoutocallupPerformancesquicklyandconvenientlyasyouplaylive.

1-3 BANK buttons

Usethesebuttonstoselectabank.

1-4 PAGE buttons

UsethesebuttonsforselectingaLiveSetpage.

OntheCategorySearchscreen,youcanusethesebuttonstoscrollthroughthelistofPerformances.

1-5 [CATEGORY] button (PART CATEGORY)

UsethisbuttontocalluptheCategorySearchfunction.Everytimeyoupressthebutton,thenextPerformancebankis

selected.

WhilethePerformancescreenisactive,pressingthisbuttonopensthePerformanceCategorySearchscreenfor

selectingaPerformance.

WhenthecursorisonaPart,pressingthisbuttonwhileholdingdownthe[SHIFT]buttonopensthePartCategory

Searchscreen.

1-6 Slot number and Category name selection buttons

Whenthe[LIVESET]buttonisselected,youcanusethesebuttonstoselectoneoftheLiveSetslots,1to16.Whenthe

[CATEGORY]buttonisselected,youcanusethesebuttonstoselectacategory.

Categories and descriptions

Categories Descriptions Categories Descriptions

Piano Piano Pad/Choir Synthpad

Keyboard Keyboardinstruments(suchas

harpsichordandClav)

Syn Comp Synthcomp(synthsoundssuitablefor

“comping”)

Organ Organ Chromatic Perc Chromaticpercussion(suchasmarimba

andglockenspiel)

Guitar Guitar Drum/Perc Drums,Percussion

Bass Bass Sound FX Soundeects

Strings Strings(instrumentssuchasviolins,or

stringensembles)

Musical FX Musicaleects(pitchedsoundeects)

Brass Brass(suchastrumpets) Ethnic Ethnic

Woodwind Woodwindinstruments(suchasclarinets,

ues,andsaxophones)

No Assign Noassign(notcategorized)

Syn Lead Synthlead(synthsoundsuitablefor

playingmelodiesandsoloing)

Init Initialized(nosettings)

YoucanalsousethesebuttonstoselectasettingontheDAW RemoteorQuick Setupscreen.

1-7 [AUDITION] button

WhileoneofthePerformance,LiveSet,orCategorySearchscreensareshown,pressingthisbuttonstartsorstopsthe

playbackoftheauditionphrasethatusesthecurrentlyselectedPerformance.

14 MONTAGE M Quick Guide

Selecting functions such as Edit and Utility

2-1 [UTILITY] button (SHOW VALUE)

ThiscallsuptheUTILITYscreenwhereyoucanchangetheoverallsettingsfortheMONTAGEM.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonshowsthevaluesontheMaindisplayortheSubdisplayif

thereareanyvaluesnotshowngraphically.

2-2 [NAVIGATION] button (FX OVERVIEW)

AccordingtothePartyouareediting,thiscallsupthemapofthecorrespondingparameters.Whenyouselectone

itemfromthemap,theparametersettingscreenforthatitemwillbeshownontheMaindisplay.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforcheckingtheeectoverview

(FXOVERVIEWscreen).

2-3 [EDIT/ ] button (JOB)

ThiscallsupthePerformanceEdit,LiveSetEditorPatternEditscreen.

WhileeditingthePerformanceparameters,pressingthisbuttonallowsyoutousetheComparefunction.

WiththeComparefunction,youcancheckthesoundbeforeandaftereditingtoseehowthesoundchanges.

WhiletheEditscreenisshown,pressthe[EDIT/ ]button.The[EDIT/ ]buttonashes,andthesettingstemporarily

reverttothestatebeforetheedit.Pressthe[EDIT/ ]buttonagaintoenablethenewlyeditedsettingsagain.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforJobsettings(JOBscreen).

2-4 [SHIFT] button

Holddownthisbuttonalongwithanotherbuttonenablesyoutocallupthealternatefunctionprintedinredatthe

bottomofeachbutton.

Forthelistoffunctions,refertotheOperationManual.

2-5 [DAW REMOTE] button

ThiscallsuptheDAWREMOTEscreenforthePerformance.YoucanselectthedesiredDAW Remotemodebypressing

theCategorynamenumberselectionbuttonslocatedontheright.

2-6 [QUICK SETUP] button (FX BYPASS)

ThiscallsuptheUtilityQUICKSETUPscreen.YoucanselectaQuick SetupmodebypressingtheCategorynamenumber

selectionbuttonslocatedontheright.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenformakingeectbypasssettings

(FXBYPASSscreen).













 





MONTAGE M Quick Guide

2-7 [STORE] button (FILE)

ThiscallsuptheStorescreen.OntheStorescreen,youcanselecttosavethePerformanceunderanewnameorto

overwritetheexistingperformance.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforFilesettings(FILEscreen).

2-8 [SPLIT] button (NOTE RANGE)

ThiscallsuptheSplit JobscreenforthePerformance.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforsettingnoteranges(NOTERANGE

screen).

2-9 [SONG/PATTERN] button (RHYTHM PATTERN)

ThiscallsupthePlay/RecscreenforthePerformance.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforsettingRhythmPatterns(RHYTHM

PATTERNscreen).

2-10 [TEMPO/TAP] button (PANEL LOCK)

ThiscallsuptheUtility Tempo Settingsscreen.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonlocksthepanelcontrols.Repeattheoperationtounlock

thepanelcontrols.

Controlling the built-in sequencer

3 Sequencer transport buttons

UsethesebuttonsforcontrollingplaybackandrecordingofthesequencerdataforPattern,SongandAudio.

[ ] (Back) button

Usethisbuttonformovingbackonemeasureatatime.

[ ] (Forward) button

Usethisbuttonformovingforwardonemeasureatatime.

[J] (Stop) button

Usethisbuttonforstoppingplaybackorrecording.Ifyoupressthisbuttonagainwhileplaybackiscurrentlystopped,

thestartingpointforplaybackreturnstothebeginningofthesequencerdata.

YoucanalsousethisbuttontostopArpeggioplaybackthatcontinuesplayingafterkeysarereleased(incaseswhere

theArpeggioHoldswitchison).

[I] (Record) button

ThiscallsuptheRecordingscreen.WhiletheRecordingscreenisshown,pressthisbuttontocalluptheRecording

setupscreen(thebuttonstartsashing).Whenyoupressthe[R](Play)button,recordingstarts,andthebuttonstops

ashingandlightscontinuously.

[R] (Play) button

Usethisbuttonforstartingsongplaybackorrecording.Whenplaybackorrecordingstarts,thebuttonashesatthe

tempoofthesong.Thebuttonlightsupcontinuouslyforaudio.



16 MONTAGE M Quick Guide

Viewing the screen, switching settings, selecting items, and entering values

4-1 Main display (touchscreen)

Thisdisplayshowsvariousinformation.Bytouchingthescreen,youcanchangethesettings.

YoucanalsousetheSlotnumberandCategorynameselectionbutton,cursorkey,datadial,anddisplayknobsto

movethecursorandchangethevalue.Fordetails,see“Statuscheckandbasicoperation”(page34).

4-2 Display knobs

Rev SendVar SendDry LevelPanVolume

UsetheseknobstocontroltheselectedrowofparametersshownintheMaindisplay.Theknobswiththeparameter

namesshownatthebottomoftheMaindisplayandwiththeirindicatorlampsONcanbeusedforchangingthe

parametersettings.





 

 

 

MONTAGE M Quick Guide

4-3 Data dial

Usethisdialtochangethevalueshownatthecursorposition.

Movingthedialfasterletsyouchangetheparametervalueinlargerincrements.

4-4 Cursor buttons

Formovingthecursorpositionup,down,left,andright.

4-5 [DEC/NO] button

Usethisbuttontodecreasethevalueinincrements.

Youcanalsousethisbuttontoselect“NO”forthemessageshownontheStoreorJobscreen.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonletsyoujumpthroughthevaluesinunitsof10.

4-6 [INC/YES] button

Usethisbuttontoincreasethevalueinincrements.

Youcanalsousethisbuttontoselect“YES”forthemessageshownontheStoreorJobscreen.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonletsyoujumpthroughthevaluesinunitsof10.

4-7 [EXIT] button

Thefunctionsshownonthetouchscreenarearrangedinhierarchicalorder.Usethisbuttontoreturnupwardonthe

hierarchicallevel.

IfaPerformancescreenotherthantheHomescreenisshown,youcanusethe[EXIT]buttontoinstantlyreturntothe

Homescreen.

4-8 [ENTER] button

Usethisbuttontocalluptheitemshown/selectedonthescreen.Youcanalsousethisbuttontoselect“YES”for

promptsormessagesshownontheStoreorJobscreen.

18 MONTAGE M Quick Guide

Controlling parameters in real time as you play the keyboard, and adjusting detailed

parameter values

5-1 Sub display

5-2 Tab selection buttons

5-3 Tab PAGE buttons

TheparameterscontrolledwithKnobs1–8areshownontheseparateSubdisplay.UsetheTabselectionbuttonsand

TabPAGEbuttonstoswitchamongtheavailablescreens.

DierentparametersareavailabledependingontheparticulartonegenerationtypeforthePartbeingedited.

5-4 [PAGE JUMP] button

Thiscallsup(ontheMaindisplay)theadvancedsettingscreenfortheparametercurrentlybeingeditedontheSub

display.

Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonenablestheparameterbeingeditedontheMaindisplayto

beshownontheSubdisplayaswell.

5-5 [QUICK EDIT] button

SelectthetypeofparameterstocontrolwithKnobs1–8.Youcanpressthesamebuttonasmanytimesasnecessaryto

switchtoadierentsetting.

Indicator Description

SELECTEDPART ControlstheparametersforthePartbeingedited

MULTI ControlstheparametersformultiplePartsbeingedited

GROOVE Controlsthegroove-relatedparameters

Whenthe[ASSIGN]buttonisturnedon,the[QUICKEDIT]buttonwillbeturnedo.





   



 

La page charge ...

Yamaha M8x Guide de démarrage rapide

Marque: Yamaha

Modèle: M8x

Taper: Guide de démarrage rapide

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

italiano: Yamaha M8x Guida Rapida
English: Yamaha M8x Quick start guide
español: Yamaha M8x Guía de inicio rápido
Deutsch: Yamaha M8x Schnellstartanleitung
русский: Yamaha M8x Инструкция по началу работы
Nederlands: Yamaha M8x Snelstartgids
português: Yamaha M8x Guia rápido
dansk: Yamaha M8x Hurtig start guide
polski: Yamaha M8x Skrócona instrukcja obsługi
čeština: Yamaha M8x Rychlý návod
日本語: Yamaha M8x クイックスタートガイド
suomi: Yamaha M8x Pikaopas
română: Yamaha M8x Ghid de inițiere rapidă

Documents connexes

Autres documents

HeadRush MX5 Mode d'emploi