Huion GS2201 Manuel utilisateur

Taper
Manuel utilisateur
KAMVAS 22
GS2201
User Manual
Benutzerhandbuch
Manuel d' utilisateur
ユーザーマニュアル
Manuale d' uso
Manual de Usuario
2
25
45
65
85
105
EN
GS2201
2
Contents
1 / Precautions................................................................................................................................ 3
2 / Product Overview..................................................................................................................... 4
2.1 Display Introduction..................................................................................................................4
2.2 Product and Accessories..........................................................................................................4
2.3 Setting Up Display..................................................................................................................... 8
2.4 Install Driver................................................................................................................................ 8
3 / Pen Basic Operation.................................................................................................................9
3.1 Hold the Pen...............................................................................................................................9
3.2 Position the Cursor.................................................................................................................... 9
3.3 Click...........................................................................................................................................10
3.4 Move..........................................................................................................................................10
3.5 Use the Side Buttons...............................................................................................................10
3.6 Pen Nib Replacement............................................................................................................. 11
4 / OSD Buttons............................................................................................................................ 11
5 / Function Setting.....................................................................................................................12
5.1 Working Area Setting..............................................................................................................12
5.2 Display Setting.........................................................................................................................14
5.3 Pen Buttons Function Setting............................................................................................... 16
5.4 Enable the Windows Ink Feature..........................................................................................16
5.5 Pressure Sensitivity Setting....................................................................................................17
5.6 Pen Pressure Testing...............................................................................................................18
5.7 Pen Nib Activity Setting.......................................................................................................... 18
5.8 Data Export and Import.......................................................................................................... 19
6 / Specifications..........................................................................................................................20
7 / Trouble Shooting................................................................................................................... 21
8 / After-service Contact............................................................................................................ 24
EN
GS2201
3
1/ Precautions
Please read this manual carefully before using, and keep it well for future reference.
--Before cleaning the display, please unplug the USB cable and wipe with a soft damp cloth, do
not use any kind of detergents.
--Please don't place the display near water sources such as bathtub, washbasin, sinks, washing
machine, damp basement, swimming pool, etc.
--Do not place the display on where is unstable or a height for children reaching easily in order to
avoid danger.
--Do not place the display and digital pen close to the magnetic field.
--The grooves and holes on the back case is designed for ventilation to prevent the monitor from
overheating. Please don't place the display on beds, sofas, carpets or in embedded device.
--Only power supplies shown on the nameplate can be used for the display. If you have questions
about the power supply which you are using, please consult the distributor of your display.
--To protect your display, please switch off the power when it is not in use. During blackouts or not
using for long time, please unplug the display from the socket.
--Make sure no foreign bodies get inside the monitor through grooves and prevent liquid from
splashing on the display as to prevent short-circuit or fire.
--If the display has a breakdown, do not open the main case and try to repair it by yourself. Please
ask for a service for proper repair and maintenance.
--When the following situations occur, please unplug the power adapter and you may need a
service for full repair and maintenance:
A. The power wire or plug is damaged or worn out;
B. There is liquid splashed inside of the display;
C. The display has fallen or the LCD is broken;
D. When obvious abnormalities occur to the display.
--While getting the components replaced, you are supposed to guarantee that the repairman
is using the substitute components specified by the manufacturer. Unauthorized component
replacement might cause fire, electric shocks or other dangers.
EN
GS2201
4
2/ Product Overview
2.1 Display Introduction
Thanks for choosing HUION®KAMVAS®22 creative display. This is a new generation
of desktop-level professional drawing display, which can greatly improve your work
efficiency of painting and creation, and full of fun. You can freely paint and write, depicting
different lines and colors, just as the pen writes on the paper, which brings you a real shock
experience.
To give you a better understanding and using of your display, please read this user manual
carefully. The user manual only shows the information under Windows, unless otherwise
specified, this information applies to both Windows and Macintosh systems.
2.2 Product and Accessories
EN
GS2201
5
By dragging this switch to adjust the
stand angle from 20°-80°
2.2.1 Accessories
Battery-free pen Replacement Nibs
(inside the pen holder)
Pen Holder
Cleaning Cloth
3-in-1 Cable
Warranty Card
Power Cable
Pen Nib Clip
(inside the pen holder)
2.2.2 Adjustable Stand
We designed this ergonomic adjustable stand specially for your KAMVAS display, you can
adjust the angle of the display according to your usage habit, and make you feel more
comfortable when painting and creating.
EN
GS2201
6
USB Cable
HDMI Cable
Power Adapter
Power Cable
2.3 Setting Up Display
[1] Take out the pen display and stand from the package, then assemble the stand
to the back of the display with attached screwdriver according to the following
instruction.
Adjust the stand angle
by dragging this switch
[2] Connect the pen display to your computer with 3-in-1 Cable or USB-C to USB-C
Cable.
1)Connect the display to your computer with 3-in-1 cable;
Connect the power adapter to the power cable.
EN
GS2201
7
2)Connect the display to your computer with USB-C to USB-C cable;
Connect the power adapter to the power cable.
EN
GS2201
8
2.4 Install Driver
2.4.1 OS Support
Windows 7 or later, macOS 10.12 or later.
2.4.2 Install Driver
Please download the driver from our website: www.huion.com/download
After finishing installation, you can find the driver icon " " in the system tray area, which
means the driver was installed successfully; when you connect the display to computer,
the icon will change to color " ", which means the driver has already recognized the
display and you can start using it now.
2.4.3 How to Install and Uninstall the Drivers on Linux Devices
Notice:
1. Please remember to close the command window and reboot your Linux device after
installing the driver, or the driver will not be useful. After rebooting the device, you can access
the system main menu to find the Huion Tablet driver and then open it to finish some settings.
2. If you are running Linux operating system on VMware, you must use the VMware
Workstation Pro version. And the Play version of VMware Workstation doesn’t support the
Huion Tablet driver.
3. Some versions of the Ubutun operating system don’t support using more than one monitor
simultaneously. And we recommend you upgrade your system to 20.04LTS or later if you want
to use a Huion painting device on multiple display screens simultaneously smoothly.
Huion Tablet Driver installation packages in 2 different formats are available for Linux devices:
· tar.xz (file format)
· deb (file format)
Here are the step-by-step instructions for installing the driver packages in different file formats
respectively:
1.Instructions for installing the driver package file in tar.xz format.
Linux operating systems supported:
Ubuntu
Steps to Install:
1.Extract the contents of the driver file, huiontablet_XXXX.tar.xz, into a folder.
2.Open the command window in the folder.
EN
GS2201
9
3.Input the following command: “sudo sh install.sh”, and press the enter key on the keyboard
to make your Linux device execute it.
EN
GS2201
10
4.Enter the user password to complete the installation.
5.Please reboot your Linux device to run the driver, or the driver will not be useful.
EN
GS2201
11
Steps to Uninstall:
1.Open the command window in the folder of the driver.
2.Input the following command in the command window: “sudo sh uninstall.sh”, and press the
enter key on the keyboard to make your Linux device execute it.
EN
GS2201
12
3.Enter the user password to complete the uninstallation.
2.Instructions for installing the driver package file in deb format.
Linux operating systems supported:
Ubuntu
Steps to Install:
1. Open the folder and double-click the driver file in deb format to enter the system default
interface of installing the driver on the application store, then click to install.
EN
GS2201
13
2.Enter the user password to complete the installation.
EN
GS2201
14
3.Please reboot your Linux device to run the driver, or the driver will not be useful.
Tips: Please ensure that your Linux device has been connected to the internet when installing
the driver, or the installation will fail when entering the application store interface.
Steps to Uninstall:
1.Enter the interface of the installed applications on the system’s built-in application store.
2.Find the driver and click to uninstall it.
Tips: If you can't access the system’s built-in application store, you can search out the driver file,
huiontablet_xxx.deb, then double-click it to enter the installation interface, and click the
remove button to uninstall it.
EN
GS2201
15
Notes:
[1] Before installing, you need to uninstall other driver of similar products, including the
old driver of this product.
[2] Before installing, please close all graphics software and anti-virus software to avoid
unnecessary mistake.
2.4.4 Driver Page
After the download is successful, double-click to open the driver, connect the display to
your computer with attached cables.
When the connection is complete, watch for a prompt at the bottom left of the driver
page that display two states "Device disconnected" or "Device connected".
EN
GS2201
16
3/ Pen Basic Operation
3.1 Hold the pen
Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle
the side switch easily with your thumb or forefinger. Be careful not to accidentally press
the switch while drawing or positioning with the pen.
Notice:
When not in use, place the pen in the pen case or on the desk. Do not place the pen
on the surface of screen, which may interfere with the use of other screen cursor
positioning equipment, may also cause your computer can not enter the sleep mode.
3.2 Position the cursor
Move the pen slightly above the active area without touching the screen surface, the
cursor will move to the new position accordingly.
Press the pen tip on the screen to make a selection. Tap the screen once with the pen
tip, or touch it to the screen with enough pressure to register a click.
EN
GS2201
17
3.3 Click
Use the pen tip to tap once on the screen to register a click. Tap to highlight or
select an item on the screen and double-click to open it.
3.4 Move
Select the object, then slide the pen tip across the screen to move it.
3.5 Use the side buttons
The buttons on the pen can be set to two different customizable functions.
You can use the buttons whenever the pen tip is within 10mm of the display active area.
You do not have to touch the pen tip to the display in order to use the switch.
EN
GS2201
18
:
3.6 Pen Nib Replacement
The nib will be worn off after using for a long time, then you need to replace a
new nib.
[1] Anticlockwise rotate the pen holder to open the cover, take a new nib out.
[2] Insert the pen nib into the pen nib clip and tilt the pen to pull out the old nib.
[3] Insert the new nib straight into the pen and push the nib slowly and firmly
until it stops.
4/ OSD Buttons
OSD Buttons
: Power on/off the display.
: Press to call up the menu, after entering menu, its functionis "confirm".
: After entering menu, its function is "to up/right/increase".
: After entering menu, its function is "to down/left/decrease".
:Before entering menu, its function is "auto adjustment". After entering menu, its function
is "back to previous menu".
EN
GS2201
19
5/ Function Setting
5.1 Working Area Setting
5.1.1 Using Multiple Monitors
Select the Working Area tab to define the relationship between pen movement on the
display and cursor movement on the monitor screen.
By default the entire active area of display maps to the entire monitor. If more than one
monitor is in use and you are in extended mode, you need to choose the related monitor
on the driver interface which you are going to map to.
If your monitors are in mirror mode (All monitors display the same content), the display
maps to the entire space on each monitor and the screen cursor is displayed on each
monitor simultaneously.
5.1.2 Working Area Setting
Define the display area that will be mapped to the screen area.
[1] Full Area: the entire active area of the display. This is the default setting.
[2] Screen Ratio: As a general rule, be 16:9.
[3] Customized Area:
1> Enter coordinate values.
2> Drag the corners of the foreground graphic to select the screen area.
EN
GS2201
20
5.1.3 Rotate Working Area
By changing the direction of the display to adapt to the left and right hand operation. You
can rotate the display by 0°, 90°, 180° or 270°.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177

Huion GS2201 Manuel utilisateur

Taper
Manuel utilisateur