Stealth Cam STC-QS20 Manuel utilisateur

Page 1

STC-QS20

Instruction Manual

R0

Page 2

To ensure the product is being utilized to its full potential, we recommend checking

our website for new product updates. If your camera is having an issue, please check

our website to determine you are using the latest rmware or software version.

Notice

TECHNICAL SUPPORT

EMAIL:

[email protected]

Please allow 48 hours for email

response.

GSM, LLC

P.O. Box 535189

Grand Prairie, TX 75053-9504

CUSTOMER SERVICE

CONTACT & HOURS

Toll Free: 877-269-8490

CALL CENTER HOURS

Mon – Fri / 8 AM – 5 PM (CST)

WEBSITE

www.stealthcam.com

Contact Us

QS20

Page 3

Table of Contents

About Your Camera 4

Quick Setup Guide 5

Camera Overview 6

Camera Setup 8

Camera Conguration 9

Viewing and Deleting Images 12

Frequently Asked Questions 13

Camera Care 14

FCC COMPLIANCE 15

Limited Warranty Information 16

Page 4

About Your Camera

80 Foot Detection and Flash Range

See farther with long-distance PIR sensor and LEDs.

0.8 Second Trigger Speed

Never miss a shot with lightning fast 0.8 second trigger

speed.

Quick Set Options

Set up in seconds with pre-programmed options.

Burst Rapid-Fire Mode

Rapid-re Burst Mode, multiple exposures per triggering.

18 IR LEDs

Perfectly illuminate your nighttime photos with 18 IR LED

lights.

Page 5

Quick Setup Guide

Insert Batteries and SD Card

Install 8 AA batteries and a class 10 SD card into camera.

Mount Camera

Mount the camera at the desired location using the strap

mount, Python Lock cable, Articulating Ball Joint Mount, or

other desired mounting mechanism. Position the camera so

that it does not face East or West directly as the rising and

setting of the sun can cause false positive triggers.

Activate Camera

Set camera to desired Quick Set (QSET) or to custom

conguration and place in desired vantage point to start

capturing photos of game.

Page 6

Camera Overview

Menu Down Up Enter

Mode Switch

MENU ENTER

Universal

¼ - 20 thread

SD Card

Slot

Battery

Release Switch

Page 7

Python Cable

Lock Hole

Strap

Mounts

Universal

¼ - 20 thread

Page 8

Camera Setup

Battery Installation

To remove batteries from unit, simply open camera and slide the

battery release switch to the left. Once the battery compartment is

open, insert batteries into camera, being careful to match the orien-

tation marked on your camera. After batteries are inserted, close the

battery compartment and secure the battery release switch.

SD Card Installation

SD card slot is located on the

bottom of the camera, above the

battery compartment. Insert SD

card with the label facing back of

camera. Only minimal resistance

should be felt as card is inserted

and a click when the card is fully

inserted.

Page 9

Camera Conguration

This camera features 4 distinct modes of operation:

QSET 1 | QSET 2 | QSET 3 | CUSTOM |.

Each setting is activated based upon the position of the switch inside the unit.

Name Type Quality Timeout

Delay Detail

QSET 1 Photo Medium 30 sec 3 Photos

QSET 2 Photo Medium 30 sec 1 Photo

QSET 3 Video 640 x 368 30 sec 10 sec video

Quick Sets

Once selected, the screen will display the Quick Set (QSET) that has been

chosen and then count down from 9 to 0 seconds. When countdown has

been completed camera is ready and in an active state.

See table for breakdown of Quick Set modes.

O

QSET 1

QSET 2

QSET 3

Custom

MENU ENTER

Page 10

Custom Conguration

The CUSTOM setting on your camera allows you to customize every

setting to t your exact needs. To begin, move the slider to the CUSTOM

position and press the menu button on the camera.

Once inside the custom settings menu, use the Up and Down arrows to

scroll through the dierent settings. To change a setting that is displayed,

press the Enter key and the setting will begin ashing. At this point use

the Up and Down arrows to change the setting. When nished press the

Enter button to save the change or press Menu to cancel change.

When you are nished conguring your camera’s settings, press the

Menu button to return your camera to an active state.

Page 11

OPERATION MODE: The operation mode setting

is accessible immediately after the Time setting.

The screen will be blank with either Video or

Photo displayed on the right side of screen. Press

Enter to change between Photo and Video mode.

OPTIONS: Photo | Video

DATE: This setting is used by the camera to

display the correct date on the Info Bar of the

image.

PHOTO BURST: This setting determines how

many photos are taken each time the camera is

activated.

OPTIONS: 1 photo – 3 photos

Note: This setting is only applicable in photo

mode.

PIR DELAY: This setting is used to determine how

long the camera will wait before reinitializing the

PIR sensor after taking a photo.

OPTIONS: 5 sec | 10 sec | 15 sec | 30 sec |

60 sec

RESOLUTION: This setting will determine the

quality of each image. A higher quality will result in

better photos and take more memory space.

OPTIONS: High | Med | Low

Note: This setting is only applicable in photo

mode.

VIDEO LENGTH: This setting is used to determine

the length of time, in seconds, of a video recording

OPTIONS: 5 sec | 10 sec | 20 sec

Note: This setting is only applicable in video

mode.

TIME: This setting is used by the camera to display

the correct time on the Info Bar of the image.

Camera Conguration cont.

Page 12

There are a few methods for viewing and deleting your les.

i. Using an SD Memory Card Reader/Viewer: You will simply

need to remove the SD card from the camera and insert it into

the reader to view the les; you can also delete them from this

device.

ii. Using your computer: This method requires an SD card slot to

be installed to your computer. Please refer to your computer’s

Owner’s Manual for the proper way of viewing the les.

iii. Obtain a mobile device adapter: This will allow you to plug one

end into the device, and, at the other end, insert the SD card.

Please refer to the vendor’s User Manual for the proper way of

viewing the les.

Viewing and Deleting Images

Page 13

Frequently Asked Questions

Q: Will I lose my images and settings if the batteries die?

A: You will lose your settings but not your images. The images are stored on your

external SD memory card so your images will be intact only on your card.

Q: Why is my camera taking pictures with nothing in front of it?

A: This camera is powered by motion activation. This can cause objects, like a tree

branch or moving water, within the camera frame to cause the camera to take a photo.

Q: Is there a warranty that comes with my camera or an extended warranty I can

purchase?

A: Your Stealth Cam Camera comes with a Limited 1-year warranty. Please contact

support at 1.877.269.8490 for more information.

Q: Can I mix batteries together?

A: No, you should never mix batteries. After your camera batteries die, always install

brand new batteries in your camera.

Q: Can I use rechargeable batteries in the camera?

A: Rechargeable batteries can be used but will cause battery percentage to be report-

ed incorrectly.

Page 14

Camera Care

Operating Conditions

This camera is designed to function in 14°F – 104°F (-10°C -

40°C) 20%-85% relative humidity, non-condensing.

Product Care

• When not in use, store camera in a cool, dust-free, environment.

• Handle camera with care.

• Camera is weather resistant only. Do not fully submerge camera in

water or other liquid. Doing so will void camera warranty.

• Only use same type of batteries to power camera. Do not mix old

and new batteries.

• Do not touch camera lens directly. Clean only with soft lens cloth.

• Use damp cloth to clean. DO NOT submerge camera.

• Remove batteries when camera is not in use for an extended time.

• Do not open camera housing to access internal parts. Doing so

could damage camera and void warranty.

Notice

Camera is an active electronic device. Attempting to service

internal parts may expose you to dangerous voltages and

other risks.

Page 15

NOTE: This equipment has been tested and found to comply with the limits for Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio or television receptions, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measure:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or Modications not expressly approved by the party responsible could void

the user’s authority to operate this device.

Product specications are subject to change. Good Sportsman Marketing, LLC is not

responsible for any photographic or typographical errors.

May be protected by one or more U.S. Patent numbers: 6,735,387 / 6,768,868 /

6,834,162 / 7,149,422 / 7,308,196 / 7,593,632 / 7,710,457 / 8,895,926.

IC WARNING

This device contains license-exempt transmitter(s) that comply with Innovation, Science and

Economic Development Canada’s license- exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device. This equipment meets the exemption from the routine evaluation limits

in section of RSS-102. It should be installed and operated with a minimum distance of 20cm

between the radiator and any part of your body.

FCC COMPLIANCE

GSM, LLC

STC-QS20A v2

Page 16

Your Stealth Cam Trail Camera is covered by a 365 Day Limited Warranty on

parts and labor from the date of original purchase, and purchases must be made

through an authorized dealer. The warranty covers defects in workmanship and

materials. The warranty does not apply to units which have been damaged or

abused intentionally or unintentionally. A purchase from individuals or unauthorized

Internet sites such as eBay voids the warranty. Tampering with or altering the unit

will void the warranty. Any unauthorized service will void warranty. A copy of your

original sales receipt must be produced for any warranty service and a Return

Authorization (RA) number must be obtained from customer service at 877-

269-8490 prior to returning product. Stealth Cam is not responsible for any lost

untraceable packages or those without a Return Authorization at the time of return.

Limited Warranty Information

Page 17

STC-QS20

Manuel d’instuction

Page 18

Pour vous assurer que le produit est utilisé à son plein potentiel, nous vous recom-

mandons de consulter notre site Web pour les nouvelles mises à jour du produit. Si

votre appareil photo rencontre un problème, veuillez consulter notre site Web pour

déterminer si vous utilisez la dernière version du micrologiciel ou du logiciel.

Remarquer

SOUTIEN TECHNIQUE

EMAIL:

[email protected]

Veuillez prévoir 48 heures pour le

courrier électronique

réponse.

GSM, LLC

P.O. Box 535189

Grand Prairie, TX 75053-9504

SERVICE CLIENTS

CONTACT & HEURES

Sans frais: 877-269-8490

HEURES DU CENTRE D’APPELS

Lun - ven / 8h - 17h (CST)

SITE INTERNET

www.stealthcam.com

Nous contacter

Page 19

Table of Contents

À propos de votre appareil photo 20

Guide d’installation rapide 21

Présentation de la caméra 22

Conguration de la caméra 24

Conguration de la caméra 25

Conguration de la caméra (suite) 27

Achage et suppression d’images 28

Questions fréquemment posées 29

Salle de soins 30

CONFORMITÉ DE FCC 31

Informations sur la garantie limitée 32

Page 20

À propos de votre appareil photo

Détection de 80 pieds et portée du ash

Voir plus loin avec le capteur PIR longue distance et les LED.

Vitesse de déclenchement de 0,8 seconde

Ne manquez jamais un tir avec une vitesse de déclenche-

ment ultra rapide de 0,8 seconde.

Options de réglage rapide

Installation en quelques secondes avec des options prépro-

grammées.

Mode de tir rapide en rafale

Mode rafale à tir rapide, expositions multiples par déclenche-

ment.

18 IR LEDs

Illuminez parfaitement vos photos de nuit avec 18 lumières

LED IR.

La page charge ...

Stealth Cam STC-QS20 Manuel utilisateur

Stealth Cam STC-QS20 Manuel utilisateur

dans d''autres langues

Documents connexes