Babyletto M11288 Manuel utilisateur

Congratulations! This product will provide many

years of service if you adhere to the following

guidelines for care, maintenance, and operation.

This product is for residential use only. Any insti-

tutional use is strictly prohibited.

DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THEIR

OWN SPECIFIC QUANTITY OF PARTS AND HARDWARE.

YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE

ILLUSTRATED DUE TO STYLISTIC VARIATIONS.

Care and Maintenance

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

11288revised 09AUG2021

1

Maintenance and Cleaning:

To preserve the hand-crafted quality of your furni-

ture, we recommend using a cotton cloth and a

non-toxic cleaner. Periodic polishing or oiling on

wood stains will help to maintain the rich wood

tones. For our upholstered products, we recom-

mend using water to clean suede products and

light foam cleaners for all other fabrics.

If your child is teething, some furniture’s ﬁnish may

be aected. Be assured that our low-VOC lacquers,

ﬁnishes and glues comply with applicable regula-

tions and standards. Touch up kits and replace-

ment parts are available for purchase upon request

by contacting Babyletto at: 323. 282. 5163.

Important Note:

Improper assembly can result in damage to your

furniture or cause harm to your child. Proper

assembly is critical to ensure a safe and comforta-

ble end result. Please read all instructions before

assembly and keep instructions for future use.

!

• Failure to follow these warnings and the assembly

instructions could result in serious injury or death.

• Read all instructions before assembling this

product.

• Keep instructions for future use.

• Do not throw away packaging material until

assembly is complete.

• Properly discard all packaging materials after

assembly is complete.

• This product has many moving parts, serious injury

can occur if not used properly. Keep hands, ﬁngers

and body parts away from the mechanism. To

reduce the risk of head entrapment and other

injuries, keep children and pets away from openings

and moving parts in and around furniture.

• Proper assembly of this item requires 2 people.

• Check this product for damaged hardware, loose

joints, missing parts or sharp edges before and after

assembly and frequently during use. DO NOT use

this product if any parts are missing, damaged or

broken. Contact Babyletto for replacement parts

and instructional literature if needed. DO NOT

substitute parts.

• Maximum weight capacity: 300 pounds.

WARNING

2

3

We will replace any missing parts at the time of pur-

chase or any defective item within a one year period

from the date of original purchase. An extended war-

ranty period of three years is valid only on the elec-

tronic controls and electronic mechanisms of this

product. Please keep your receipt so that we may pro-

cess your warranty request. This warranty only covers

new units with original packaging and ownership, and

is not transferable. It does not cover any used, second-

hand or demo models.

This warranty does not cover any damaged or defec-

tive parts that result from installation and assembly,

normal wear and tear, abuse, negligence, improper

use or alteration to the ﬁnish, design, and hardware of

the product. The speciﬁc legal rights of this warranty

may vary from state to state. Some states do not allow

any exclusion or limitation of incidental damages.

Some states do not allow limitation on how long an

implied warranty lasts.

ONE YEAR LIMITED WARRANTY:

B x 1 Base

C x 1 Cushion

Be sure you follow the instructions in the order that they appear.

Parts List

Ref. No DescriptionParts

A x 1 Seat

Back

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

4

Right Side

Panel

D-2 x 1

Left Side

Panel

D-1 x 1

(back)

A

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

Assembly Instructions

Step 1

5

(back)

(Base Cover)

B

x2

Step 1 (in details)

6

B

(back)

A

!

B

(back)

A

!

B

(back)

A

!

Make sure the locking mechanism on

each metal glide is aligned in the center.

1.

2.

Firmly push each side into place one at a

time. You should hear a click when the

chair back locks into place on each side.

Click !

7

Tips on the Locking Mechanism

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

8

Step 2

A

B

!

D-1

D-2

9

Step 3

A

B

!

MAKE SURE POWER CABLE IS

NOT UNDER THE METAL BASE.

THIS IS A FIRE HAZARD.

WARNING

10

Step 4

11

Step 5

Congrats!

12

* If chair is not functioning after following these steps,

please check the cord underneath the chair is fully

plugged in to the chair motor.

!

C

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

13

POWER CORD SAFETY

WARNING:

UNPLUG AND REMOVE POWER CORD FROM THE WALL AND THE POWER

SOCKET AT THE REAR OF THE POWERED RECLINER WHEN NOT IN USE AND

STORE THE CORD OUT OF REACH OF CHILDREN.

DANGER:

To reduce the risk of electric shock:

Always unplug the powered recliner from the electrical outlet before cleaning.

Control Panel

CAUTION :

Risk of electric shock.

Dry location use only.

This Class B digital apparatus complies with Canadian ICES-003.

This Device Complies with part 15 of the FCC rules.

WARNING :

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received, including interference that

may cause undesired operation.

• Please note that changes or modiﬁcations not

expressly approved by the party responsible for

compliance could void the user's authority to

operate the equipment.

14

• NOTE: This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or

television reception, which can be determined by

turning the equipment o and on, the user is encour-

aged to try to correct the interference by one or

more of the following measures: --Reorient or relo-

cate the receiving antenna. --Increase the separa-

tion between the equipment and receiver. -- Con-

nect the equipment into an outlet on a circuit dier-

ent from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV

technician for help.

15

The chair can be made to recline by simply pressing the

button located at the inside right of the armrest.

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

Tension Adjustment

From Chair to Recliner

The chair is returned to the upright position by pressing the

button located at the inside right of the armrest.

CAUTION :

Do not allow children to play on this mechanized furniture or operate the mecha-

nism. Leg rest folds down on closing so that a child could possibly be injured.

Always leave in an upright and closed position. Keep hands and feet clear of

mechanism. Only the occupant should operate it.

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

Tension Adjustment

From Recliner to Chair

16

17

KIWI GLIDER RECLINER WITH

ELECTRONIC CONTROL AND USB

To Disassemble :

B

A

(back)

x2

!

A

(back)

B

!

18

19

La page charge ...

Babyletto M11288 Manuel utilisateur

Babyletto M11288 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents