Kenwood KCL95.424SI Le manuel du propriétaire

Catégorie
Mélangeurs
Taper
Le manuel du propriétaire
2
TYPE: KCL95
Instructions
Istruzioni
Instrucciones
Bedienungsanleitungen
Gebruiksaanwijzing
Instrukcja obsługi
3
English 2 - 18
Nederlands 19 - 35
Français 36 - 52
Deutsch 53 - 69
Italiano 70 - 86
Español 87 - 104
Česky 105 - 120
Polski 121 - 138
4
6
32
30
34
33
7
8
16
15
5
3
1
12
2
33
17
19
13
22 23 24 25
31
26 27 28 29
14
18 20 21
4
3 4 9
35
10 11
All in One Dishes
Fruit Compote
Slow Cook
Chunky Soup
Steam
Manual Mode
To pause, push dial
Min02:0 3 Off
A B C D
E F G H
I J K L
M N O
KENWOOD WORLD APP
P Q R
Using Preset Programmes
To Use Your Cooking Chef Connect – Manual Operation
500ml
+
goz
0 g goz
200 g
Zero
Manual Mode
To pause, push dial
Min02:0 3 Off
STo Use The Weighing Function
TTo Use Your Steamer Attachment
UV
Tool Height Adjustment
To Fit and Use Your Splashguard Assembly
WTo Fit and Remove Your Stir Assist Clip
XAssembling The High Temperature Creaming Beater
Safety
ORead these instructions carefully and retain for future reference.
ORemove all packaging and any labels.
OIf the plug or cord is damaged it must, for safety reasons, be replaced by
Kenwood or an authorised Kenwood repairer in order to avoid a hazard.
important note - electronic medical implants
OLike all induction heating products, this appliance generates short-range
magnetic fields. If any user or person in close proximity has a pacemaker or
other active implants, please consult a doctor before use, concerning any
possible incompatibility to prevent any risk to health.
OSwitch off and unplug the appliance before fitting or removing tools/
attachments, after use and before cleaning.
OKeep body parts, hair, jewellery and loose clothing away from moving parts
and fitted attachments.
ONever put your fingers etc., into the hinge mechanism.
ONever leave the appliance on unattended when in a non cooking mode.
O When leaving the appliance unattended in the cooking mode, pay close
attention to the following:
{ ensure the instructions are followed with regards to temperatures and
maximum quantities to process;
{ make sure the unit and cord are positioned out of reach of children and away
from the edge of the work surface;
{ check the progress on a regular basis to ensure enough liquid is added and
food is not overcooking.
ONever use a damaged appliance. Get it checked or repaired: see ‘Service and
Customer Care’.
ONever use an unauthorised attachment or more than one attachment at once.
ONever exceed the maximum capacities and when using the induction heater
never exceed the 3 litre maximum fill level marked on the inside of the bowl.
OWhen using an attachment, read the safety and usage instructions that come
with it.
OTake care when lifting this appliance as it is heavy. Ensure the head is locked
and that the bowl, tools, outlet covers and cord are secure before lifting.
OWhen moving the appliance always pick up by the pedestal base and mixer
head. Do not lift or carry the appliance by the bowl handle.
ONever let the cord hang down where a child could grab it.
ONever let the power unit, cord or plug get wet.
OBe careful when handling or touching any part of the appliance when being
used in the cook mode or after cooking, IN PARTICULAR THE BOWL,
SPLASHGUARD AND TOOLS as they will remain HOT long after the appliance
has been switched off. Use the handles to remove and carry the bowl.
Use oven gloves when handling the hot bowl and hot mixing tools.
OThe symbol marked on the product indicates a surface that can become hot
during use.
OTake care when removing bowl tools after extended use as they may get hot.
OThe underside of the bowl will remain hot long after the heating has stopped.
Use caution when handling and use the work surface protection mat when
placing the bowl on heat sensitive surfaces.
OBe careful of steam escaping from the mixer bowl particularly when opening
the lid in the splashguard or when raising the mixer head.
OIf transferring hot food from the mixer to the blender, always allow the
ingredients to cool to room temperature before placing in the blender.
OOnly use the bowl and tools supplied with this appliance. Never use the bowl
with any other heat source.
ONever operate the appliance in the cook mode with the bowl empty.
ONever insert anything through the air vents.
OWhen using this appliance ensure it is positioned on a level surface away from
the edge. Make sure it is at least 10 cm from walls and ensure that the vents
are not blocked. Do not position below overhanging cupboards.
OFor the correct and safe operation of the induction cooker ensure that the
bowl base and temperature sensors are clean and dry before cooking.
2
3
OMetallic objects such as knives, forks, spoons and lids should not be placed on
the bowl pedestal/induction area as they can get hot.
OAs with all induction cooking appliances do not place credit cards, magnetic
media or sensitive electronic equipment near to the appliance when in use.
ODo not use the appliance for deep frying foods.
OAlways ensure food is thoroughly cooked before eating.
ODo not exceed 250ml when cooking with oil.
OFood should be eaten shortly after cooking or allowed to cool quickly and
then refrigerated as soon as possible.
O Misuse of your appliance can result in injury.
O Do not use excessive force when pressing the touch screen and never use a
sharp object to operate it.
ODo not use the whisk for heavy mixtures (e.g. creaming fat and sugar) as you
could damage it.
OThe power-supply cord is used to reduce risk resulting from becoming
entangled in or tripping. Extension cords may be used if care is exercised
in their use. If an extension cord is used: 1) The marked electrical rating of
the extension cord should be at least as great as the electrical rating of the
appliance; and 2) The cord should be arranged so that it will not drape over
the countertop or tabletop where it can be pulled on by children or tripped
over unintentionally. If the appliance is of the earthed type, the extension cord
should be a earthing-type 3-wire cord. The electrical rating of the appliance is
listed on the bottom of the unit.
OAppliances can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and if
they understand the hazards involved.
OChildren should be supervised to ensure that they do not play with the
appliance.
OThis appliance shall not be used by children. Keep the appliance and its cord
out of reach of children.
OOnly use the appliance for its intended domestic use. Kenwood will not accept
any liability if the appliance is subject to improper use, or failure to comply
with these instructions.
OThe maximum rating is based on the mini chopper/mill attachment that draws
the greatest load. Other attachments may draw less power.
OThis appliance is not intended to be operated by means of an external timer or
separate remote-control system.
ODo not move or raise the mixer head with an attachment fitted as the Stand
Mixer could become unstable.
ODo not operate your appliance near the edge or overhanging the work surface
or apply force to an attachment when fitted, as this may cause the unit to
become unstable and tip over, which may result in injury.
Steamer attachment
O This attachment produces steam which can burn you.
O Do not get burnt by steam coming out of your steamer basket, especially when
removing the splashguard or lifting the feed chute lid.
O Take care when handling parts; any liquid, condensation, steamer part or Stand
mixer part will be very hot. Use oven gloves.
O Unplug the appliance before fitting or removing parts or cleaning.
Food safety
O Cook meat, poultry, fish and seafood thoroughly. And never cook them from
frozen.
O Do not reheat cooked food in your steamer.
4
Know Your Kenwood Cooking Chef
Key
Attachment outlets
1 High speed outlet (HSO)
2 Slow speed outlet (SSO)
3 Bowl tool socket
4 Stir tool socket
Mixer
5 High speed outlet cover
6 Mixer head
7 Slow speed outlet cover
8 Cooking chef bowl
9 Head - lift lever
10 Control dial
11 On/Off switch
12 Display screen
13 Work surface protection mat
14 Drain hole
15 Bowl pedestal/induction area
16 Air vents
17 Temperature sensors
18 Heat shield
19 Rubber seal (removable)
20 Splashguard
21 Feed chute lid
22 K-beater
23 High temperature creaming beater
24 Whisk
25 Dough tool
26 Stir tool
27 Stir assist clip
28 High temperature spatula
29 Dough scraper
30 Spanner
Steamer Attachment
31 Handle supports
32 Supporting ring
33 Folding handles
34 Removeable tray
35 Egg holders
Note: Slow Speed outlet attachments
The slow speed outlet on your Stand mixer model features
the Twist Connection System. It is designed to accept Twist
Connection System attachments.
When purchasing new attachments for the slow speed outlet
you should check compatibility with your Stand mixer. All
Twist Connection System attachments can be identified by the
product code which starts with KAX and also by the Twist logo
which is visible on packaging.
If you own attachments featuring the Bar Connection System
you will need to use the KAT002ME adaptor to connect
these to the Twist Connection System on your Stand
mixer.
For more information visit
www.kenwoodworld.com/twist.
Connecting to Kenwood World App
Refer to Illustrations A D
The Kenwood World App will allow you to control your
appliance through your smart phone or tablet.
1 Plug in and press the On/O switch on the side of the
power unit.
2 Select Settings > WiFi > Connect and follow the
instructions on the touch screen.
PIN number
O This will be required when prompted by the Kenwood
World App.
O The appliance can only be connected when the PIN
Number is shown on the display screen. If the PIN is
entered incorrectly, follow the instructions on the app and
retry.
O To display the unit’s PIN number, select Settings
> WiFi > Connect and follow the instructions on the display
screen (only when connected to WiFi).
Note:
WiFi
Operates with IEEE802.11 b, g and n at 2.4 GHz only. xxj
Compatibility
Kenwood World App compatible with latest versions of iOS
and Android.
Factory reset
Important
O When disposing of the appliance, it is important to factory
reset it to protect your personal data.
O Selecting this option will erase all WiFi data stored on the
appliance and restore it to factory settings.
O To factory reset your appliance, select Settings
>Factory Reset.
To Set Up Your Cooking Chef Connect
Refer to Illustrations E I
IMPORTANT
O Make sure the induction area, temperature sensors and
external surface of the bowl base are clean. Failure to do
this will affect the heat sensor, resulting in poor cooking
performance.
O Check that all the outlet covers including the heat shield
are fitted. If they are not correctly fitted the heating
function will not operate.
1 Plug in and press the On/Off switch.
2 Turn the head-lift lever clockwise and raise the mixer head
until it locks.
3 Push the heat shield upwards onto the underside of the
mixer head until fully located. The heat shield must never
be used without the rubber seal fitted correctly.
O If using the Cooking Chef Connect without heat, it is
not necessary to fit the heat shield unless using the
splashguard. Refer to ‘To Fit and Use Your Splashguard
Assembly’ section.
4 Fit the bowl to the base.
5 Place the required tool in the bowl tool socket or stir tool
socket if using the stir tool, locating the pin in the groove
and then turn to lock into position.
Before plugging in
O Make sure your electricity supply is the same as the one shown on the underside of your appliance.
O WARNING: THIS APPLIANCE MUST BE EARTHED.
O This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.
O This appliance is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Before using for the first time
O Wash the parts: see ‘Care and Cleaning’.
5
O To remove a tool, reverse step 5 above. (Always use oven
gloves to remove tools after cooking).
6 To lower the mixer head, raise it slightly, then turn the head
lift lever clockwise.
Lower into the locked position.
Stir Tool – when using the stir tool the stir assist clip can also
be used to assist the mixing action, see ‘to fit and remove
your stir assist clip'. The stir tool can also be used with the
whisk. Do not use the stir tool with the dough tool.
To Use Your Cooking Chef Connect - Manual
Operation
1 Add the relevant ingredients to be cooked/mixed.
2 Set the required time, speed and temperature.
Note: To use the machine as a mixer without heat, select
'Off' when setting the temperature.
Turn the control dial anti-clockwise to use stir intervals and
pulse.
Turn the control dial clockwise to use continuous speeds.
3 Press the control dial to start.
4 To stop the unit at any time, press the control dial. If in
cooking mode, take care as the unit will be hot.
High speed, high temperature mode (HSHT)
To mix at high speed at temperatures of 60°C and above
O Select time (if applicable), speed and temperature of
60°C or above.
O A warning will pop up on the display screen advising that
you are entering HSHT mode
O Once the warning has been read and undestood, press
yes to confirm that you are happy to enter HSHT mode.
O Press the control dial to start.
This function MUST ONLY be used with the whisk and/
or stir tool. You should not exceed the maximum cooking
capacity of 3 litres and you must ensure the splashguard is
fitted. The machine must not be left unattended.
5 Once a programme has finished, the unit will beep 3 times.
O Note: If no time has been set, the heating and stirring
processes will automatically end once the timer has
reached 8 hours.
6 To stop the heating process, change the temperature to
‘OFF’. To stop the unit at any time press the control dial.
Important – If at any time the mixer head is raised during
an operation, the heating process will pause and the bowl
tool will stop and will not restart when the mixer head is
lowered. To restart the mixer, lower the mixer head and
press the control dial.
Using Preset Programmes
Refer to Illustrations P R
1 Select the Preset Menu.
2 Choose the preset you wish to use.
3 Follow the instructions on the display screen.
4 To stop the unit at any time, press the control dial. Take
care as the bowl and tools will be hot.
After Cooking
O Be careful when handling or touching any part of the
appliance when being used in the cooking mode or after
cooking, IN PARTICULAR THE BOWL AND TOOLS as
they will remain HOT long after the appliance has been
switched off.
O Use the two side handles to remove and carry the bowl.
Use oven gloves when handling the hot bowl and hot
tools.
O The underside of the bowl will remain hot long after the
heating has stopped. Use caution when handling and use
the work surface protection mat provided to protect heat
sensitive surfaces.
Hints and Tips
O Some recipes, in particular those with a high water
content, will not be able to reach a cooking temperature
above 100°C (as this is the boiling point of water).
O When adding ingredients to the bowl during cooking,
turn the speed down and add the ingredients slowly and
evenly.
O To heat sauces quickly use a continuous stir setting.
O If using the splashguard during cooking, always
remove it before lifting the mixer head. Be aware of
condensation formed on the splashguard and heat
shield.
O When lifting the mixer head lift it slowly to allow any
liquid on the underside of the heat shield to flow back
into the bowl.
O Four stir delay functions are available which enable
you to select the appropriate amount of stirring for
individual recipes. Some recipes will require constant
stirring to stop ingredients from sticking to the
bottom of the bowl, whereas others will benefit from
intermittent stirring to maintain the texture of the food.
Manual Operation (Attachments)
1 Remove High speed outlet/Slow Speed outlet cover (if
applicable).
2 Fit attachment according to specific instructions
supplied.
3 Set the required time and speed (refer to illustrations
L - M). Press the control dial to start.
To stop the unit at any time, press the control dial again.
To Remove And Fit Outlet Covers
High-Speed Outlet Cover
1 To remove the cover, use the grip and lift upwards.
2 To fit, place the cover over the outlet and push
downwards.
Slow-Speed Outlet Cover
1 To remove the cover, use the grip on the underside and
pull outwards.
2 To fit, locate the catch at the top of the cover into the
outlet recess and push to clip into position.
To Use The Weighing Function
Refer to Illustrations S
1 Select the weighing function on the touch screen.
2 Fit the bowl.
3 Zero the scale.
4 Weigh the ingredients.
5 To change between units tap the unit button on the
weighing screen.
Note: Always place the appliance on a dry flat, stable surface
prior to weighing. Do not apply pressure to the mixer or bowl
whilst weighing as this will affect the accuracy of the scales.
The weighing function can be used with the mixer head in
either the down or up position.
The weighing function is accurate up to 6kg.
6
Preset Usage Chart
The default settings can be adjusted to suit your recipe, where available.
Non-adjustable settings are indicated by the icon.
When “Heating” is shown on the display screen, the timer will not start counting down until the correct temperature has been
reached.
Preset Recommended Tool Default Settings
(adjustable)
Keep Warm Stage Recipe Ideas / Uses
Egg White Whisking 1 min 15 secs
(15 secs – 5 mins)
Max
OFF
Egg whites for chocolate mousse
Sponge Cake 1 min
(30 secs – 5 mins)
1 – Max
(– Max)
OFF
Victoria Sponge, Cupcakes
Dough Kneading 10 mins
(1 mins – 30 mins)
Min to 1
(min – 2)
OFF
Bread Rolls, Pizza
Dough Proving 1 hrs
(5 mins – 2 hrs)
OFF
w
30˚C
(25˚C – 35˚C)
Proving yeasted doughs
Chocolate Melting 10 mins
(5 mins – 2 hrs)
60˚C
Chocolate Mousse
Swiss Meringue 10 mins
(1 mins – 20 mins)
Max
40˚C
Base for Buttercream frosting
Italian Meringue 4 mins
(1 mins – 20 mins)
HSHT 6
(– Max)
60˚C – 85˚C
Lemon Meringue Pie
Baked Alaska
Fruit Compote 20 mins
(5 secs – 2 hrs)
()
104˚C
30 mins
62˚C
Cake Fillings, Dessert toppings
Popcorn 10 mins
(5 mins – 10 mins)
OFF
180˚C
For fresh homemade popcorn
* For best results always use the
preset.
7
Recipe
Prune Marinade
200g Clear Runny Honey
40g Soft Prunes
40ml Water
1 Place all ingredients into the mini chopper/mill. Refrigerate
overnight.
2 Fit the attachment to the Stand mixer.
3 Switch to pulse for 4 seconds.
4 Use as required.
Steamer Attachment
Refer to Illustration T
O When using your steamer basket, always keep your
Cooking Chef away from walls and overhanging cupboards:
the steam could damage them.
O Season food after cooking, this will help to prevent spots
or pitting occurring on the stainless bowl.
1 Place the removable tray on a flat surface ensuring that the
handles are folded inwards.
2 Fit the supporting ring onto the tray ensuring that the
handle supports on the ring fit next to the V shaped cut
outs in the tray.
3 Fold out the handles and clip onto the handle supports.
4 Place the food to be cooked onto the tray. Vegetables
should be thoroughly cleaned and peeled as required.
5 Add the required amount of water to the bowl (see
cooking chart). Filtered water is best as it reduces
limescale and spotting.
6 Place the assembled steamer into the bowl – it will find its
own height.
7 Fit the heatshield to the mixer head.
8 Fit the bowl and steamer basket to the Kitchen Machine.
9 Lower the mixer head and then fit the splashguard.
10 Select the steam pre-set and adjust the cooking time (as
per the Recommended Cooking Chart). Press the control
dial to start
11 Allow to cook for the required time.
12 Remove the splashguard.
13 Lift the mixer head.
Preset Usage Chart – Continued
Preset Recommended Tool Default Settings
(adjustable)
Keep Warm Stage Recipe Ideas / Uses
Steam 20 mins
(5 mins – 45 mins)
OFF
100˚C
Salmon en Papillote
All in One Dishes 40 mins
(5 secs – 8 hrs)
()
103˚C140˚C
30 mins
62˚C
Bolognese
Chunky Soup 20 mins
(5 secs – 8 hrs)
()
103˚C140˚C
30 mins
62˚C
Minestrone, Broths
Slow Cook 2 hrs
(5 secs – 8 hrs)
()
98˚C140˚C
30 mins
62˚C
Beef bourguignon
8
14 Lift out the steamer basket by the handles – take care to
prevent them folding inwards.
15 Place the steamer basket on a large plate or other suitable
container.
16 Unclip the handles and fold in towards the centre. Lift off
the supporting ring and fold out the handles.
17 Remove the food.
important
Be careful when handling anything: any liquid,
condensation, steamer part or Stand Mixer part will be
very hot. Use oven gloves.
O Do not attempt to fit a mixing tool when using the steamer
basket.
O Do not cook food in the mixer bowl whilst using the
steamer basket.
Hints and Tips
O Liquid left in the bowl is good for making soup or stock.
Be careful it will be very hot.
O Leave gaps between pieces of food.
O Stir large amounts half way through cooking.
O Similar sized pieces of food cook more evenly.
O If steaming more than 1 type of food, if something needs
less time, add it later.
O If you lift the feed chute lid or remove the splashguard,
steam will escape and cooking may take longer.
O Food will continue cooking when your Stand Mixer
switches off, so remove food immediately.
O If your food’s not cooked enough, reset the time. You
may need to top up with water.
O The cooking times are a guide only. Always check that
food is thoroughly cooked before eating.
O Do not allow the unit to boil dry, top up with water as
necessary.
Display Screen Explained
Tap this icon to open the settings menu.
Tap this icon to open the pre-set programmes menu.
Tap this icon to weigh ingredients into the bowl.
Shows the time selected in hours (h), minutes (m) and seconds (s).
Shows the stir interval selected.
If an intermittent speed (2 Æ 4) is selected, the outer ring will progressively increase and
the appliance will stir when it is full.
Shows the temperature selected.
A pulsing red background indicates the machine is in heating mode.
A solid red background indicates the machine has reached the set temperature.
An intermittent arrow pointing downwards indicates the appliance is cooling down.
Indicates that a setting (time, speed or temperature) cannot be adjusted.
Status Information Text here shows status information.
Indicates that the bowl, its contents and any parts being used are hot. Please handle with
care.
Indicates that the appliance is connected to a WiFi network.
Indicates that the appliance is in the high speed high temperature mode (HSHT)
Turn the control dial anti-clockwise to use stir intervals and pulse.
Turn the control dial clockwise to use continuous speeds min - max.
9
Recipes
Recipe Tool Used Preset / Manual Settings Ingredients
Minestrone Chunky Soup
20 mins
98˚C
Add the following all at once:
100g pancetta, diced
2 garlic cloves, chopped
50g Arborio rice
tbsp tomato puree
70g savoy cabbage
1 tsp dried rosemary
2 tsp dried sage
1 celery stick, sliced
60g leek, sliced
75g onion, sliced
75g carrot, sliced
1L hot vegetable stock
Salt and pepper
Beef Strogano All in One Dishes
30 mins
103˚C
Add the following all at once:
600g beef, diced
1 tbsp paprika
1 tbsp butter
1 garlic clove, chopped
400g beef stock
200g mushroom, sliced
150g onion, sliced
300g carrot, sliced
200ml single cream
1 tbsp cornstarch
1 tbsp water }mix together
Salt and pepper
Crème Anglaise Manual Settings
15 mins
85˚C
Add the following all at once:
250g full fat milk
250g double cream
1 tsp vanilla extract
2 tbsp cornflour
96g egg yolk, }mix together
80g caster sugar
Popcorn Popcorn
10 mins
OFF
180˚C
Add the following all at once:
50g Popcorn Kernels
20g Sunflower Oil
* For best results always use the preset.
Rice Pudding Manual Settings
1 hr
15 mins
95˚C
Add the following all at once:
150g short grain rice
1L full fat milk
75g caster sugar
2 tsp vanilla extract
10
Temperature and Speed Settings
Temperature
Guidelines
60°C Melting Chocolate
72°C – 82°C Poaching
98°C – 99°C Simmering
100°C Boiling, steaming
130°C – 140°C Sautéing vegetables
180°C Browning meat
(P) Pulse - For short bursts of maximum power.
Stir interval 1 – The mixer will operate at a constant slow speed. Used for folding
light ingredients into heavier mixtures.
Stir interval 2 – Intermittent stir with short pauses. When set to this speed,
intermittently operates on a slow speed every 10 seconds for 1.5 revolutions.
Stir interval 3 – Intermittent stir with medium pauses. When set to this speed,
intermittently operates on a slow speed every 30 seconds for 1.5 revolutions.
Stir interval 4 – Intermittent stir with long pauses. When set to this speed,
intermittently operates on a slow speed every 5 minutes for 1.5 revolutions.
Speed min - max Continuous speeds gradually increasing to max
HSHT To mix at temperatures above 60˚C using speeds Min-Max.
Recommended Usage Chart
This is for guidance only and will vary depending on the exact recipe and ingredients being processed.
K-beater
For making cakes, biscuits, pastry, icing, fillings, eclairs and mashed potato.
Hints and Tips
• To avoid splashing of ingredients gradually increase the speed.
To fully incorporate the ingredients, stop mixing and scrape down the bowl with the
spatula frequently.
• Use cold ingredients for pastry unless your recipe says otherwise.
Recipe/ Process
(Max) (Minutes)
Pastry & Biscuits – rubbing fat into flour Flour weight 910g Min 12
All In one cake mixes Total weight 4kg Min Max 45–60 secs
Creaming Beater
For creaming and mixing soft ingredients
Hints and Tips
• To avoid splashing of ingredients gradually increase the speed.
When creaming fat and sugar for cake mixes, always use the fat at room temperature or
soften it first.
Two wiper blades are supplied with your high temperature creaming beater. Use one
wiper blade for sweet recipes and the other for savoury recipes.
Recipe/ Process
(Max) (Minutes)
Creaming butter/margarine and sugar 4.55kg
(15 Egg Mix)
Min Max 4
Beating eggs into cake mixes Min Max 1–4
Folding in flour, fruit etc Min 1 30–60 secs
Eggs sizes used = medium sized (Weight 53 – 63g).
Whipping cream used = Fresh Whipping cream with minimum 38% Fat content
11
Recommended Usage Chart
This is for guidance only and will vary depending on the exact recipe and ingredients being processed.
Whisk
For eggs, cream and soufflés.
Important
To avoid splashing of ingredients gradually increase the speed.
Do not use the whisk for heavy mixtures (all in one cakes and creaming fat and sugar)
as you could damage it.
Best results achieved when eggs are at room temperature.
Before whisking egg whites, make sure there is no grease or egg yolk on the whisk or the
bowl.
Recipe/ Process
(Max) (Minutes)
Egg whites 16 (605g)
Min Max
1½-2
Fatless sponges 930g 4 -6
Cream 2L 1½-3
Pancake Batter
Add flour to the bowl first, followed by the wet
ingredients.
Mix on minimum speed to incorporate ingredients.
250g Flour
500g Milk
200g Eggs
Min 10 secs
Max 45–60 secs
Mayonnaise
For best results scrape down the bowl after the
addition of the oil and run for a further 10 secs at
max speed.
2 Egg Yolks
10g Mustard
200mls Vegetable Oil
Max 1-1½
Dough Tool
For yeasted dough mixes
Hints and Tips
Important
Never exceed the maximum capacities and speeds stated – you may overload the
machine.
If you hear the machine labouring, switch o, remove half the dough and do each half
separately.
• The ingredients mix best if you put the liquid in first.
Yeast
Dried Yeast (the type that needs reconstituting): pour the warm water into the bowl.
Then add the yeast and sugar and leave to stand for 10 minutes until frothy.
Fresh yeast: crumble into the flour
Other types of yeast: follow the manufacturer’s instructions.
Recipe/ Process
(Max) (Minutes)
Bread Dough (stiff yeasted) Flour weight 350g–1.6kg Min 60 secs
1 3–4
Total weight 564g–2.58kg Re-knead
Speed 1
60 secs
Soft yeasted dough (enriched with
butter and eggs)
Flour weight 250g–1.6kg Min 60 secs
Total weight 478g–3.1kg 1 3–4
Re-knead
Speed 1
60 secs
Eggs sizes used = medium sized (Weight 53 – 63g).
Whipping cream used = Fresh Whipping cream with minimum 38% Fat content
12
Steamer Attachment Cooking Guide
O
These cooking times are for guidance only. 500ml of water can be used for food requiring up to 20 minutes cooking time. For
food requiring a longer cooking time use 650ml of water.
O
Do not allow the unit to boil dry, top up with water as necessary.
O
Do not overcrowd the basket when steaming poultry and fish.
O
Read ‘food safety’ in the safety section.
Vegetables
Ingredient
(Max) (minutes)
Qty of Water Preparation
Asparagus 450g 15 500ml Trim
Beans, green 450g 15-20 500ml Trim
Beans, runner 450g 15-20 500ml Trim & thinly slice
Broccoli 450g 20 500ml Cut into florets
Brussel sprouts 450g 25 500ml Trim and cut bases
Cabbage 1 small 25 500ml Shred
Carrots 450g 20 500ml Thinly slice
Cauliflower 1 medium 25 - 30 650ml Cut into florets
Courgettes 450g 15 500ml Thinly slice
Celery 1 head 15 500ml Thinly slice
Leeks 3 15 500ml Thinly slice
Mange tout 250g 15 500ml Trim
Button Mushrooms 450g 10 500ml Wipe
Parsnips 450g 15 500ml Dice or thinly slice
Peas 450g 15 500ml Shell
Potatoes, new 450g 30-40 650ml Wipe
Poultry and Fish
Recipe/Process
(Max) (minutes)
Qty of Water Comments
Chicken, boneless breasts 4 30-40 650ml Steam until thoroughly cooked
and tender
Clams 450g 10 500ml Steam until open
Prawns, medium 450g 10 500ml Steam until pink
Fish, fillets 230g 10-20 500ml Steam until it flakes
Fish, steak 2.5cm thick 15-20 500ml Steam until it flakes
Fish, whole 340g 15-20 500ml Steam until it flakes
Lobster tails 2-4 20 500ml Steam until red
Mussels 450g 15 500ml Steam until open
Oysters 6 15 500ml Steam until open
Scallops 230g 15 500ml Steam until hot and tender
13
Tool Height Adjustment
Refer to Illustration U
Whisk, Stainless Steel K-beater
For best performance the whisk and K-beater should be
almost touching the bottom of the bowl. If necessary adjust
the height using the spanner provided.
High Temperature Creaming Beater - this tool should just
touch the bottom of the bowl.
1 Unplug the appliance.
2 Raise the mixer head and insert the whisk, K-beater or high
temperature creaming beater.
3 Lower the mixer head. If the clearance needs to be
adjusted, raise the mixer head and remove the tool.
4 Using the spanner provided loosen the nut sufficiently to
allow adjustment of the shaft. To lower the tool closer to
the bottom of the bowl, turn the shaft anti-clockwise. To
raise the tool away from the bottom of the bowl turn the
shaft clockwise.
5 Re-tighten the nut.
6 Fit the tool to the mixer and lower the mixer head. (Check
its position see points above).
7 Repeat the above steps as necessary until the tool is set
correctly. Once this is achieved tighten the nut securely.
Dough Tool - this tool is set at factory and is not adjustable.
Stir Tool - this tool should just touch the bottom of the bowl.
1 Unplug the appliance.
2 Raise the mixer head and insert the stir tool.
3 Lower the mixer head. If the tool needs adjustment, raise
the mixer head and use the spanner to loosen the nut, then
lower the mixer head.
4 To lower the tool closer to the bottom of the bowl, turn the
adjustment wheel clockwise. To raise the tool away from
the bottom of the bowl, turn the adjustment wheel anti-
clockwise.
5 Re-tighten the nut.
To Fit And Use Your Splashguard Assembly
Refer to Illustration V
The splashguard assembly consists of 2 pieces: the heat shield
and the splashguard.
The heat shield is to protect the mixer head from steam
produced during the cooking process.
The splashguard should not be fitted to the bowl unless used
in conjunction with the heat shield.
1 Raise the mixer head until it locks.
2 Push the heat shield upwards onto the underside of the
mixer head until fully located. The heat shield must never
be used without the rubber seal correctly fitted.
3 Fit the bowl onto the base.
4 Lower the mixer head.
5 Rest the splashguard on the bowl rim and then slide
forward until fully located.
During mixing, ingredients can be added directly to the
bowl via the feed chute.
6 To remove the splashguard simply slide it away from the
appliance.
Note: The splashguard will remain attached to the heat shield
when the mixer head is raised unless removed before lifting
the mixer head.
7 To remove the heat shield, raise the mixer head until
it locks. Remove the tool, then pull the heat shield
downwards from the underside of the mixer head.
Note: Only fit or remove the splashguard when the mixer
head is in the locked position.
To Fit And Remove Your Stir Assist Clip
Refer to Illustration W
The stir assist clip can be used to assist the mixing action.
1 Slot the stir assist clip over the side of the bowl with the
vertical ridge on the inside and the clips on the outside.
2 Turn the clip anti-clockwise onto the bowl handles.
3 To remove, reverse the procedure.
IMPORTANT - The stir assist clip should not be fitted when
using the K-beater, whisk, dough tool or creaming beater.
Assembling The High Temperature
Creaming Beater
Refer to Illustration X
Fitting The Wiper Blade
The wiper blade is supplied already fitted and should always
be removed before cleaning.
1 Carefully fit the flexible wiper blade onto the tool by
locating the base of the wiper blade into the slot then fit
one side into the groove before gently hooking the end in
place. Repeat with the other side.
Care And Cleaning
O Always switch off and unplug before cleaning.
O A little grease may appear at outlet when you first use
it. This is normal - just wipe it off.
O The metal surfaces of the temperature sensors may show
signs of wear during normal use. This does not affect the
performance of the product.
O Do not leave the high temperature flexible beater fitted to
the mixer when not in use.
Appliance, outlet covers
O Wipe with a damp cloth, then dry.
O Never use abrasives or immerse in water.
High temperature creaming beater
O Always remove the flexible wiper blade from the tool
before cleaning.
O Wash the flexible wiper blade and tool in hot soapy water,
then dry thoroughly. Alternatively the parts can be washed
in a dishwasher.
Note: Please inspect the condition of the tool body before and
after use and also regularly inspect the condition of the wiper
blade and replace it if there are any signs of wear.
Bowl, Tools, Splashguard, Stir Assist Clip
O Wash by hand, then dry thoroughly or wash in the
dishwasher (refer to chart at front of manual).
O Never use a wire brush, steel wool or bleach to clean your
stainless steel bowl. Use vinegar or a suitable descaler to
remove limescale.
O If food sticks or burns on the inside of the bowl, remove as
much as possible using the spatula provided. Fill the bowl
with warm soapy water and allow to soak. Remove any
stubborn deposits using a nylon brush.
O Any discolouration of the bowl will not affect its
performance.
Drain Hole
O Ensure this area is free from food. If necessary use a pipe
cleaner or cotton bud to clean.
Temperature sensors
O Wipe with a damp cloth then dry thoroughly. Never use
abrasives or sharp instruments to clean the sensors.
14
Steamer Attachment
O Always switch off and unplug before removing the
attachment from the Stand Mixer.
O For easier cleaning always wash the parts immediately
after use.
All parts can be washed in hot soapy water, then dried
thoroughly. Alternatively they can be washed in the
dishwasher.
O Ordinary water and food contains salts and acids which
can sometimes effect metal surfaces such as the inside of
the mixer bowl. Should this occur clean with a nylon brush,
a non abrasive scourer or a proprietary stainless steel
cleaner.
Service and Customer Care
O If you experience any problems with the operation of
your appliance, before requesting assistance refer to the
‘Troubleshooting Guide’ section in the manual or visit
www.kenwoodworld.com.
O Please note that your product is covered by a warranty,
which complies with all legal provisions concerning any
existing warranty and consumer rights in the country
where the product was purchased.
O If your Kenwood product malfunctions or you find
any defects, please send it or bring it to an authorised
KENWOOD Service Centre. To find up to date details of
your nearest authorised KENWOOD Service centre visit
www.kenwoodworld.com or the website specific to your
Country.
O Designed and engineered by Kenwood in the UK.
O Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF
THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE)
At the end of its working life, the product must not be disposed
of as urban waste. It must be taken to a special local authority
differentiated waste collection centre or to a dealer providing
this service.
15
Troubleshooting Guide
Problem Cause Solution
The machine will not operate in the
heat mode and displays an error
message and gives a warning beep.
One of the safety sensors has been
activated.
Check display screen for notification of cause.
Ensure the head is lowered and locked.
Ensure all outlet covers are correctly fitted.
Ensure the heat shield is correctly fitted.
Ensure the cooking chef bowl is corrected
fitted.
The machine changes speed or
speed is limited during cooking.
The speed is automatically limited when
the bowl contents reach 60°C and the hot
temperature warning indicator will be on.
This is a safety feature.
Food burning on the base of the
bowl.
1 The temperature setting selected may be
too high.
2 Incorrect tool being used.
3 The stir delay is too long.
4 The tool may not be low enough in the
bowl.
5 The timer has been set for too long.
6 The sensor and/or the underside of bowl
may not be clean.
1 Reduce the temperature.
2 Check the most suitable tool is being used
and adjusted correctly.
3 Increase the frequency of the stir delay or
increase to a continuous operation.
4 Adjust the tool.
5 Cook for a shorter length of time (ensure
food is thoroughly cooked).
6 Ensure that these areas are kept clean and
dry.
Consistency of food not maintained. 1 Temperature selected too high.
2 Stir delay too frequent.
3 Ingredients cooked for too long.
4 Incorrect tool being used.
1 Reduce temperature.
2 Reduce stir delay.
3 Reduce the cooking time (ensure food is
thoroughly cooked).
4 Check the most suitable tool is being used.
Inconsistent mixing speed. 1 Ingredients too large, hard or too firm. 1 Cut food into smaller pieces, remove stones
from fruit, slowly melt ingredients without a
tool in position (but ensure a speed has been
selected).
2 Add ingredients after the head is lowered.
3 Check the most suitable tool is being used.
Difficult to shut mixer head. 1 Firm ingredients such as chocolate in the
bottom of the bowl prevent the mixer
head from locking down.
2 Stir tool has been incorrectly fitted.
1 Add ingredients after the mixer head is
lowered.
2 Ensure the stir tool is fitted into the stir tool
outlet.
Motor speed is limited when using
attachments
Hot bowl fitted. Remove the bowl, or cool the bowl to below
60°C.
The whisk or K-beater knocks
against the bottom of the bowl or
not reaching the ingredients in the
bottom of the bowl.
The high temperature creaming
beater not picking up ingredients
from the bottom of the bowl.
Tool at the wrong height and needs
adjusting.
Adjust the height using a suitable spanner –
see “Tool Height Adjustment” section.
The whisk, K-beater or creaming
beater knock against the stir assist
clip.
Stir assist clip is fitted. Remove stir assist clip – this should be used
when using the stir tool only.
Slow speed attachment cannot be
fitted.
Check your attachment is compatible for
use with your model.
Twist connection system required (Model
KAX)
Attachment must have the KAX twist
connection system to fit the outlet.
If you own attachments featuring the Bar
Connection System you will need to use
the KAT002ME adaptor to connect these to
the Twist Connection System on your Stand
Mixer.
For more information visit
www.kenwoodworld.com/twist.
16
Troubleshooting Guide - Continued
Problem Cause Solution
Standby light flashing when Stand
Mixer first plugged in.
Mixer head in the raised position or not
locked down correctly.
Check Stand Mixer head is locked down
correctly.
The Stand Mixer stops during
operation.
Standby light flashing rapidly for a
few seconds.
Overload protection or overheat system
activated.
Maximum capacity exceeded.
Unplug and check for obstruction or
overloading.
If the machine will not operate, remove some
of the ingredients to reduce the load and
restart.
If this still does not resolve the problem,
unplug and allow to stand for 15 minutes. Plug
in and reselect the speed.
If the machine does not restart following the
above procedure contact “customer care” for
further advice.
The Stand Mixer stops during
operation. Standby light is flashing
slowly.
Mixer head lifted. Lower the mixer head and restart.
Standby light off whilst machine
plugged in.
Stand Mixer has been left plugged in
for more than 20 minutes without being
operated and has gone into Standby mode.
Press the touch screen or turn the control dial
to reset.
The Stand Mixer stops during
operation.
Heat shield removed or an outlet cover
removed.
Fit the heat shield or outlet cover and then
restart.
Display screen shows an alpha/
numerical error code.
Appliance not functioning properly. Contact an authorised Kenwood Service
Centre. To find up to date details of your
nearest Kenwood Service Centre visit
www.kenwoodworld.com or the website
specific to your country.
No power to appliance /display
screen not coming on.
Appliance not plugged in.
On/O switch not operated.
Appliance has gone into standby mode.
Check appliance plugged in.
Press the On/O switch to the On position.
Touch the display screen or rotate the control
dial.
Appliance not operating. Control dial not pressed. Press the control dial to start cooking.
Timer not counting down on display
screen.
During the heating stage the timer will not
count down until the correct temperature is
reached.
Temperature set above 100˚C but water
content of food preventing temperature
going above 100˚C.
Normal operation.
Reduce or select correct temperature.
Temperature of bowl contents does
not go above 100˚C.
Water content of ingredients may prevent
the temperature from going above 100˚C.
Normal operation.
Heavy movement or vibrations
during operation.
Uneven load in bowl causing excessive
vibrations.
Maximum capacity exceeded.
Wrong tool or speed used.
Reduce quantity or rearrange food in bowl and
restart unit.
Refer to the relevant programme and
recommended speed charts for correct tool
and speed to use.
Display shows error message E:34 WiFi connection issue. Check WiFi Password.
Forget WiFi network, go to Settings > WiFi
> Forget Network.
Restart Appliance Setup from the Kenwood
World App.
slow flashing Unable to find known WiFi network Appliance may have moved, router may be
turned o or may require a restart.
fast flashing WiFi available, but unable to connect to
cloud servers.
Router may require a restart, or contact your
Internet Service Provider.
Check for working Internet connection on local
network.
Display shows error message E42 Boil Dry Error (Steam preset error) Add water to the bowl
Explanation of appliance beeping sounds
1) Fast single beep. 1) Pressing the control dial to start or stop
the machine or the head is lifted during
operation
Normal Operation
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144

Kenwood KCL95.424SI Le manuel du propriétaire

Catégorie
Mélangeurs
Taper
Le manuel du propriétaire