Aeg-Electrolux HM634200MB Manuel utilisateur

Marque: Aeg-Electrolux

Modèle: HM634200MB

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

HM634200MB

User manual Induction Hob

Notice d'utilisation Table de cuisson à

induction

Benutzerinformation Induktions-Kochfeld

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the

appliance.

We wish you much joy with your new appliance.

CONTENTS

SAFETY INFORMATION 2

INSTALLATION INSTRUCTIONS 3

PRODUCT DESCRIPTION 6

OPERATING INSTRUCTIONS 8

Automatic Switch Off 8

The Automatic Heat Up 9

Switching the Power function on and off

Timer 9

STOP+GO 10

Lock 10

The child safety device 11

Deactivation and activation of the sounds

HELPFUL HINTS AND TIPS 11

CARE AND CLEANING 12

WHAT TO DO IF… 13

ENVIRONMENT CONCERNS 14

Packaging material 14

Subject to change without notice

SAFETY INFORMATION

For your safety and correct operation of the appliance, read this manual carefully before

installation and use. Always keep these instructions with the appliance even if you move or

sell it. Users must fully know the operation and safety features of the appliance.

General safety

WARNING!

Persons (including children) with reduced physical sensory, mental capabilities or lack of ex-

perience and knowledge must not use the appliance. They must have supervision or instruc-

tion for the operation of the appliance by a person responsible for their safety.

Child safety

• Only adults can use this appliance. Children must get supervision to make sure that they

do not play with the appliance.

• Keep all packaging away from children. There is a risk of suffocation.

• Keep children away from the appliance when it is on.

2 Contents

WARNING!

Start the child safety device to prevent small children and pets from an accidental activa-

tion of the appliance.

Safety during operation

• Remove all packaging, stickers and layers from the appliance before the first use.

• Set the cooking zones to "off" after each use.

• Risk of burns! Do not put metallic objects, for example cutlery or saucepan lids, on the

cooking surface, as they can become hot.

• Users with an implanted pacemaker must keep their upper body minimum 30 cm from

induction cooking zones that are switched on.

WARNING!

Fire danger! Overheated fats and oils can catch fire very quickly.

Correct operation

• Always monitor the appliance during operation.

• Only use the appliance for domestic cooking tasks!

• Do not use the appliance as a work or a storage surface.

• Do not put or keep very flammable liquids and materials, or fusible objects (made of

plastic or aluminium) on or near the appliance.

• Be careful when you connect the appliance to the near sockets. Do not let electricity

bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.

How to prevent a damage to the appliance

• If the objects or cookware fall on the glass ceramic, the surface can be damaged.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the

glass ceramic if you move them on the surface.

• Do not let cookware boil dry to prevent the damage to cookware and glass ceramics.

• Do not use the cooking zones with empty cookware or without cookware.

• Do not cover the parts of the appliance with aluminium foil.

•

Leave a ventilation space of 5 mm between the worktop and front of the unit be-

low it.

WARNING!

If there is a crack on the surface, disconnect power supply to prevent the electric

shock.

INSTALLATION INSTRUCTIONS

Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The

rating plate of the appliance is on its lower casing.

HM634200MB

949 593 220 01

58 GAD C7 AU

220-240 V 50-60-Hz

7,4 kW

Induction 7,4 kW

AEG-ELECTROLUX

Installation instructions 3

Safety instructions

WARNING!

You must read these!

Fully obey the laws, ordinances, directives and standards in force in the country where you

use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!

Only a qualified electrician must install the appliance!

Keep the minimum distances to other appliances and units!

Install anti-shock protection, for example install the drawers only with a protective floor

directly below the appliance!

Protect the cut surfaces of the worktop against moisture with a correct sealant!

Seal the appliance to the work top with no space left with a correct sealant!

Protect the bottom of the appliance from steam and moisture, e.g. from a dishwasher or

oven!

Do not install the appliance adjacent to doors and below windows! If not, hot cookware can

be hit off the hob when you open doors or windows.

WARNING!

Risk of injury from electrical current.

The combination appliance is live.

• Observe electrical safety rules.

• Rated voltage of the combined appliances must match.

• Fit plug and socket connections together properly.

• Install correctly to give anti-shock protection.

• Loose and incorrect plug and socket connections can make the terminal become too hot.

• A qualified electrician must install the clamping connections correctly.

The appliance must have the electrical installation which lets you disconnect the appliance

from the mains at all poles with a contact opening width of minimum 3 mm.

You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips and contactors.

Assembly

min.

50mm

min.

50mm

min.

500mm

min.

5mm

600

560+1

490+1

4 Installation instructions

min.

38 mm

min.

5 mm

Removal

Installation instructions 5

PRODUCT DESCRIPTION

Cooking surface layout

1 2

180

210

145

Induction cooking zone 1400 W, with

the Power function 2500 W

Induction cooking zone 1800 W, with

the Power function 2800 W

Induction cooking zone 1800 W, with

Power function 2800 W

Control panel

Induction cooking zone 2300 W, with

the Power function 3700 W

Steam outlet

6 Product description

Control panel layout

567

Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which

functions operate.

sensor field function

the timer display shows the time in minutes

selects the cooking zone

increases or decreases the time

a lock

starts and stops the key lock or child lock

activates power function

starts and stops STOP+GO

a heat setting display shows the heat setting

Heat setting displays

Display Description

The cooking zone is off

The cooking zone operates

Keep Warm

The automatic heat-up function is on

Power function

+ digit

There is a malfunction

/ /

OptiHeat Control (3 step Residual heat indicator): still cooking / keep

warm / residual heat

Lock/Child safety function is on

Cookware unsuitable or too small or no cookware on the heating zone

The automatic switch off is on

Product description 7

OptiHeat Control (3 step Residual heat indicator)

WARNING!

\ \ Risk of burns from residual heat!

OptiHeat Control indicates the level of the residual heat. The induction cooking zones make

the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is

heated by the heat of the cookware.

OPERATING INSTRUCTIONS

You operate the hob with the knobs of the oven and control panel of the hob. The

Operating Instructions chapter for the oven tells how to operate the knobs.

When a cooking zone operates, it hums for a short time. This is typical of all ceramic glass

cooking zones and does not show that the appliance operates incorrectly.

Automatic Switch Off

The function stops the hob automatically if:

• all cooking zones are off

• you do not set the heat setting after you start the hob.

• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.

The sound operates until you remove the object.

• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the

cooking zone must be cool.

• you use incorrect cookware.

comes on in the display and after 2 minutes the cooking

zone stops automatically.

• you do not stop a cooking zone or change the heat setting. After some time

comes on

and the hob stops. See the table.

Automatic Switch Off times

Heat setting

- - -

Stops after

6 hours 5 hours 4 hours 1.5 hours

8 Operating instructions

The Automatic Heat Up

You can get a necessary heat setting in a shorter

time if you activate the Automatic Heat Up func-

tion. This function sets the highest heat setting

for some time (see the graphic), and then decrea-

ses to the necessary heat setting.

To start the Automatic Heat Up function for the

cooking zone turn the knob to the right until the

display shows

. Then set immediately necessary

heat setting. After 2 seconds

comes on.

To stop the function turn the knob to the left and

set a lower heat setting.

Switching the Power function on and off

The Power function makes more power available to the induction cooking zones. The Power

function is activated for 10 minutes at most. After that the induction cooking zone auto-

matically switches back to heat setting 9. To switch on, select heat setting with knobs, than

touch

, comes on. To switch off, change the heat setting.

Power management

The power management divides the power be-

tween two cooking zones in a pair (see the fig-

ure). The power function increases the power to

the maximum level for one cooking zone in the

pair and automatically decreases in the second

cooking zone to a lower power level. The display

for the reduced zone alternates.

Timer

Count Down Timer

Use the Count Down Timer to set how long the cooking zone operates for only this one

time.

Set the Count Down Timer after the selection of the cooking zone.

You can set the heat setting before or after you set the timer.

• To set the cooking zone: touch

again and again until the indicator of a necessary

cooking zone comes on.

• To activate the Count Down Timer: touch

of the timer to set the time (

minutes). When the indicator of the cooking zone start to flash slow, the time counts

down.

123456789

Operating instructions 9

• To see the remaining time: set the cooking zone with . The indicator of the cooking

zone starts to flash quickly. The display shows the remaining time.

• To change the Count Down Timer: set the cooking zone with

. Touch or .

• To deactivate the timer: set the cooking zone with

. Touch . The remaining time

counts back to

. The indicator of the cooking zone goes out. To deactivate you can

also touch

and at the same time.

When the countdown comes to an end, the sound operates and

flashes. The cooking

zone deactivates.

• To stop the sound: touch

CountUp Timer ( The count up timer)

Use the CountUp Timer to monitor how long the cooking zone operates.

• To set the cooking zone (if more than 1 cooking zone operate ) : touch

again

and again until the indicator of a necessary cooking zone comes on.

• To activate the CountUp Timer: touch

of the timer comes on. When the indica-

tor of the cooking zone starts to flash slow, the time counts up. The display switches

between

and counted time (minutes).

• To see how long the cooking zone operates: set the cooking zone with

. The indi-

cator of the cooking zone starts to flash quickly. The display shows the time that the

cooking zone operates.

• To deactivate the CountUp Timer: set the cooking zone with

and touch or to

deactivate the timer. The indicator of the cooking zone goes out.

Minute Minder

You can use the timer as a Minute Minder while the appliance is activated and the cook-

ing zones do not operate (the heat setting display shows

• To activate the Minute Minder: Touch

. Touch or of the timer to set the time.

The display of the cooking zones deactivates automatically after 10 seconds. When the

time comes to an end, the sound operates and

flashes.

• To stop the sound: touch

• To deactivate the Minute Minder: Activate and deactivate the left front cooking zone

for a short time.

The Minute Minder function has no effect on the operation of the cooking zones.

STOP+GO

The function sets all cooking zones that operate to the Keep Warm setting ( ).

The

function does not stop the timer function.

• To activate this function touch

. The symbol comes on.

• To deactivate this function touch

. The heat setting that you set before comes on.

When you change the heat settings, the function stops and the displays show the new heat

settings.

Lock

You can lock the sensors on the hob when the cooking zones operate.

First set the heat setting.

To activate this function touch

. The symbol comes on for 4 seconds.

The Timer stays on.

10 Operating instructions

To deactivate this function touch . The heat setting that you set before comes on.

When you change the heat setting, you deactivate this function.

When you deactivate the appliance, you also deactivate this function.

The child safety device

This function prevents an accidental operation of the hob.

To activate the child safety device

• The appliance is deactivated.

• Touch

for 4 seconds until the symbol flashes.

• Touch

in the time when symbol flashes, the symbol comes on for 4 seconds.

To deactivate the child safety device

• The appliance is deactivated.

• Touch

until the symbol flashes.

• Touch

in the time when symbol flashes, the symbol comes on for 4 seconds.

Overriding the child safety device for one cooking session

• Activate the cooking zone. The symbol

comes on. Touch until the symbol

comes on.

• Set the heat setting from position

in less than 4 seconds. You can operate the hob.

• The child safety operates after you deactivate the appliance.

Deactivation and activation of the sounds

Deactivate the appliance.

Touch

for 3 seconds, sound operates. Touch , sound operates. Touch for 3 sec-

onds.

comes on, the sound is on. Touch , comes on, the sound is off.

Touch

again to activate the sounds.

When the sounds are off, you can hear sounds only when:

• the Minute Minder comes down

• The Count Down Timer comes down

• you put something on the control panel.

HELPFUL HINTS AND TIPS

Use the induction cooking zones with suitable cookware.

Cookware for induction cooking zones

In induction cooking a powerful electromagnetic field generates an almost instant heat in-

side the cookware.

Cookware material

• correct: cast iron, steel, enamelled steel, stainless steel, a multi-layer bottom (marked as

correct by a manufacturer).

• not correct: aluminium, copper, brass, glass, ceramic, porcelain.

Cookware is correct for an induction hob if …

• ... some water boils very quickly on a zone set to the highest heat setting..

• ... a magnet pulls on to the bottom of the cookware.

Helpful hints and tips

The bottom of the cookware must be as thick and flat as possible.

Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of

the cookware automatically to some limit. But, the magnetic part of the bottom of the

cookware must have a minimum diameter of approximately 3/4 of the cooking zones.

Operating noises

If you can hear

• cracking noise: cookware is made of different materials (Sandwich construction).

• whistling: you use one or more cooking zones with high power levels and the cookware

is made of different materials (Sandwich construction).

• humming: you use high power levels.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not refer to any defects.

Energy saving

• If possible, always put the lids on the cookware.

• Put cookware on a cooking zone before you start it.

• Stop the cooking zones before the end of the cooking time to use residual heat.

• The bottom of pans and cooking zones must have the same dimension.

Öko Timer (Eco Timer)

To save the energy, the heater of the cooking zone switches itself off earlier than count

down timer signal. The heating time reduction depends on cooking level and cooking time.

The Power function is best to heat up large quantities of water.

Information on acrylamides

Important! According to the newest scientific knowledge, if you brown food (specially the

one which contains starch), acrylamides can pose a health risk. Thus, we recommend that

you cook at the lowest temperatures and do not brown food too much.

CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

WARNING!

Sharp objects and abrasive cleaning agents will damage the appliance.

For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.

Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.

12 Care and cleaning

To remove the dirt:

1. – Remove immediately:melted plastic, plastic foil, and food with sugar. If not, the

dirt can cause damage to the appliance. Use a special scraper for the glass . Put the

scraper on the glass surface at an acute angle and move the blade on the surface .

– Remove after the appliance is sufficiently cool:limescale rings , water rings, fat

stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic

or stainless steel.

2. Clean the appliance with a moist cloth and some detergent.

3. At the end rub the appliance dry with a clean cloth.

WHAT TO DO IF…

Problem Possible cause and remedy

You cannot activate the appli-

ance or operate it.

• Activate the appliance again and set the heat setting in 10

seconds.

• You touched 2 or more sensor fields at the same time. Only

touch one sensor field.

• The Stop+Go operates. See the chapter Operating instructions.

• There is water or fat stains on the control panel. Clean the

control panel.

A Sound operates and the ap-

pliance deactivates.

A sound operates when the ap-

pliance is deactivated.

You put something on one or more sensor fields. Remove the ob-

ject from the sensor fields.

The residual heat indicator does

not comes on.

The cooking zone is not hot because it operated only for a short

time. If the cooking zone should be hot, speak to the service cen-

tre.

The Automatic Heat Up func-

tion does not operate.

The highest heat setting is set. The highest heat setting has the

same power as the Automatic Heat Up function.

The heat setting changes be-

tween two levels.

The Power management is activated. See the section Power man-

agement.

The sensor fields become hot. The cookware is too large or you out it too near to the controls.

Put large cookware on the rear cooking zones if it is necessary.

There is no signal when you

touch the panel sensor fields.

The signals are deactivated. Activate the signals (see OffSound

Control).

flashes

The Automatic Switch Off operates. Deactivate the cooking zone

and activate it again after 60 seconds.

If after 60 seconds

comes on again speak to the service cen-

tre.

comes on

The Child Safety Device or the Lock operates. See the chapter Op-

erating instructions.

What to do if… 13

Problem Possible cause and remedy

comes on

• No cookware on the cooking zone. Put cookware on the cook-

ing zone.

• Not correct cookware. Use the correct cookware.

• The diameter of the bottom of the cookware is too small for

the cooking zone. Move cookware to a smaller cooking zone.

and number comes on.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some

time. Disconnect the fuse from the electrical system of the house.

Connect again. If

comes on again, speak to the service centre.

comes on

There is an error in the appliance, because a cookware boils dry.

The protection against become too hot for the cooking zone op-

erates. The Automatic Switch Off operates.

Deactivate the appliance. Remove the hot cookware. After, ap-

proximately 30 seconds activate the cooking zone again.

should go out of the display, residual heat indicator can stay. Let

the cookware become sufficiently cool and check it with the sec-

tion Cookware for the induction cooking zone.

If you tried the above solutions and cannot repair the problem, speak to your dealer or the

Customer Care Department. Give the data from the rating plate, three-digit-letter code for

the glass ceramic (it is in the corner of the cooking surface) and an error message that

comes on.

If you operated the appliance incorrectly, the servicing by a customer service technician or

dealer will not be free of charge, even during the warranty period. The instructions about

the customer service and conditions of guarantee are in the guarantee booklet.

ENVIRONMENT CONCERNS

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product,

please contact your local council, your household waste disposal service or the shop where

you purchased the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic

components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as

household waste at the waste disposal facilities in your municipality.

14 Environment concerns

Nous vous remercions d’avoir choisi l’un de nos produits de qualité.

Afin de garantir une performance optimale et constante de votre appareil, veuillez

lire attentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement

et efficacement toutes les fonctions de l’appareil. Nous vous recommandons de

conserver cette notice à proximité pour une utilisation rapide et optimale. Si

l'appareil devez être vendu ou cédé à une autre personne, assurez-vous que la

notice d'utilisation l'accompagne.

Nous vous souhaitons beaucoup de plaisir avec votre nouvel appareil.

SOMMAIRE

CONSIGNES DE SÉCURITÉ 15

INSTRUCTIONS D'INSTALLATION 17

DESCRIPTION DE L'APPAREIL 20

NOTICE D'UTILISATION 21

Arrêt de sécurité 21

Démarrage automatique de la cuisson 22

Activation et désactivation de la fonction

Booster 22

Minuteur 23

STOP+GO 24

Verrouillage 24

Sécurité enfants 24

Désactivation et activation des signaux

sonores 24

CONSEILS UTILES 25

ENTRETIEN ET NETTOYAGE 26

EN CAS D'ANOMALIE DE FONCTIONNEMENT

EN MATIÈRE DE PROTECTION DE

L'ENVIRONNEMENT 28

Emballage 28

Sous réserve de modifications

CONSIGNES DE SÉCURITÉ

Pour votre sécurité et le bon fonctionnement de l'appareil, lisez attentivement ce manuel

avant l'installation et l'utilisation. Conservez ces instructions à proximité de l'appareil. Les

utilisateurs doivent connaître parfaitement le fonctionnement et les fonctions de sécurité

de l'appareil.

Avertissements importants

AVERTISSEMENT

Cet appareil n'est pas conçu pour être utilisé par des personnes (y compris des enfants)

dont les facultés physiques, sensorielles ou mentales sont réduites, ou qui manquent d'ex-

périence et de connaissances, à moins qu'une personne responsable de leur sécurité ne les

supervise ou leur donne des instructions sur la manière de l'utiliser.

Sécurité des enfants

• Cet appareil a été conçu pour être utilisé par des adultes. Veillez à ce que les enfants n'y

touchent pas et ne l'utilisent pas comme un jouet.

• Ne laissez pas les emballages à portée de main des enfants. Ils pourraient s'asphyxier !

Sommaire

• Tenez les enfants éloignés de l'appareil pendant son fonctionnement.

AVERTISSEMENT

La sécurité enfants empêche l'utilisation accidentelle ou involontaire de l'appareil.

Utilisation

• Retirez tous les emballages, les étiquettes et les films protecteurs de l'appareil (sauf la

plaque signalétique) avant de l'utiliser pour la première fois.

• Mettez les zones de cuisson à l'arrêt après chaque utilisation.

• Risque de brûlures ! Ne posez aucun objet contenant du métal, comme les couverts et

couvercles de récipients sur la table de cuisson. Ils risqueraient de s'échauffer.

• Les utilisateurs porteurs d'un pacemaker doivent se tenir à une distance d'au moins 30

cm (au niveau du buste) des zones de cuisson à induction mises en fonctionnement.

AVERTISSEMENT

Danger d'incendie ! Surveillez attentivement la cuisson lors de friture dans l'huile ou la

graisse : les graisses surchauffées s'enflamment facilement.

Utilisation

• Surveillez toujours l'appareil pendant son fonctionnement.

• Votre appareil est destiné à un usage domestique normal.

• N'utilisez pas l'appareil comme plan de travail ou support.

• Ne posez pas ou ne stockez pas de liquides ou des matériaux inflammables, des objets

susceptibles de fondre (plastique, aluminium) sur ou à proximité de l'appareil.

• Faites attention si vous branchez d'autres appareils électriques à des prises situées à

proximité de la table de cuisson. Contrôlez que les câbles d'alimentation n'entrent pas en

contact avec les surfaces brûlantes de l'appareil ou les récipients brûlants. Contrôlez que

les câbles ne soient pas enchevêtrés.

Pour éviter d'endommager l'appareil

• Évitez de laisser tomber des objets ou des récipients sur la surface vitrocéramique au ris-

que d'endommager la table de cuisson.

• N'utilisez pas de récipients en fonte, ni de récipients dont le fond est endommagé et ru-

gueux. Ils risqueraient de rayer la table de cuisson.

• Ne laissez pas le contenu des récipients s'évaporer en totalité au risque d'endommager

irrémédiablement les récipients eux-mêmes ainsi que la table de cuisson.

• Ne faites jamais fonctionner les zones de cuisson avec des plats de cuisson vides ou sans

aucun récipient.

• Ne recouvrez pas des parties de l'appareil avec du papier aluminium.

•

Laissez un espace ouvert de 5 mm sous le plan de travail ainsi qu'à l'avant de

l'appareil pour permettre à l'air de circuler correctement.

AVERTISSEMENT

Si votre table de cuisson est endommagée (éclat, fêlure,...), débranchez votre appa-

reil pour éviter tout risque d'électrocution.

16 Consignes de sécurité

INSTRUCTIONS D'INSTALLATION

Avant d'installer l'appareil, notez le numéro de série qui figure sur la plaque signaléti-

que.La plaque signalétique se trouve sur la partie inférieure de l'appareil.

HM634200MB

949 593 220 01

58 GAD C7 AU

220-240 V 50-60-Hz

7,4 kW

Induction 7,4 kW

AEG-ELECTROLUX

Consignes de sécurité

AVERTISSEMENT

Veuillez lire attentivement cette notice d'utilisation ainsi que les recommandations et les

avertissements qu'elle contient avant de procéder à l'installation et à la première utilisation

de l'appareil.

L'installation doit être conforme à la législation, la réglementation, les lignes directrices et

les normes en vigueur dans le pays de résidence (consignes de sécurité électro-techniques

et réglementation, recyclage conforme et réglementaire, etc.).

Seul un électricien qualifié est autorisé à installer cet appareil

Respectez l'espacement minimal requis par rapport aux autres appareils.

La protection contre les contacts accidentels doit être assurée par le montage, par exemple

les tiroirs doivent être installés uniquement avec un plancher de protection directement

sous l'appareil.

Protégez l'appareil contre l'humidité en plaçant un joint d'étanchéité dans les rainures du

plan de travail.

Comblez les fentes entre le plan de travail et l'appareil avec du joint.

Protégez la partie inférieure de l'appareil de la vapeur et de l'humidité émanant, par exem-

ple, d'un lave-vaisselle ou d'un four.

N'installez pas l'appareil à proximité d'une porte ou sous une fenêtre. Les récipients chauds

sur la table de cuisson risquent de tomber lors de l'ouverture de la porte ou de la fenêtre.

AVERTISSEMENT

Le courant électrique peut provoquer des blessures.

L'appareil intégré est placé sous tension.

• Observez les consignes de sécurité électro-techniques.

• La tension nominale des appareils intégrés doit concorder.

• Raccordez correctement les connexions électriques.

• Assurez-vous que l'appareil est correctement installé de manière à éviter tout contact.

• Des connexions desserrées ou incorrectes peuvent être à l'origine d'une surchauffe des

bornes.

• Le raccordement électrique ne doit être effectué que par un électricien qualifié.

Dans le cas d'une installation fixe, le raccordement au réseau doit être effectué par l'inter-

médiaire d'un interrupteur à coupure omnipolaire, ayant une distance d'ouverture des con-

tacts d'au moins 3 mm.

Les dispositifs d'isolement comprennent : des coupe-circuits, des fusibles (les fusibles à vis-

ser doivent être retirés du support), des disjoncteurs de mise à la terre et des contacteurs.

Instructions d'installation

Montage

min.

50mm

min.

50mm

min.

500mm

min.

5mm

600

560+1

490+1

min.

38 mm

min.

5 mm

18 Instructions d'installation

Démontage

Instructions d'installation

DESCRIPTION DE L'APPAREIL

Description de la table de cuisson

1 2

180

210

145

Zone de cuisson à induction 1400 W,

avec fonction Booster 2500 W

Zone de cuisson à induction 1800 W,

avec fonction Booster 2800 W

Zone de cuisson à induction 1800 W,

avec fonction Booster 2800 W

Bandeau de commandes

Zone de cuisson à induction 2300 W,

avec fonction Booster 3700 W

Évacuation de la vapeur

Description du bandeau de commandes

567

Les touches sensitives permettent de commander l'appareil. Les voyants et des signaux sonores

indiquent les fonctions activées.

Touche sensitive Fonction

Affichage du minuteur Affichage de la durée en minutes

Sélection d'une zone de cuisson

Augmentation ou diminution de la durée

Verrouillage

Activation et désactivation de la fonction de ver-

rouillage des touches ou de la Sécurité enfants

Activation de la fonction Booster

Activation et désactivation de la fonction STOP

+GO

Indicateur du niveau de cuisson Affichage du niveau de cuisson

20 Description de l'appareil

La page charge ...

Aeg-Electrolux HM634200MB Manuel utilisateur

Marque: Aeg-Electrolux

Modèle: HM634200MB

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Aeg-Electrolux HM634200MB User manual
Deutsch: Aeg-Electrolux HM634200MB Benutzerhandbuch

Documents connexes

Aeg-Electrolux HM634200MB Manuel utilisateur

Aeg-Electrolux HM634200MB Manuel utilisateur

Aeg-Electrolux HM634200MB Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents