Sony CDP-CE335 Manuel utilisateur

Marque: Sony

Modèle: CDP-CE335

Taper: Manuel utilisateur

3-865-901-21 (1)

 1999 by Sony Corporation

Operating Instructions

Mode d’emploi

Manual de instrucciones

CDP-CE335

CDP-CE235

Compact Disc

Player

WARNING

To prevent fire or shock

hazard, do not expose the unit

to rain or moisture.

To avoid electrical shock, do

not open the cabinet. Refer

servicing to qualified

personnel only.

The laser component in this product

is capable of emitting radiation

exceeding the limit for Class 1.

This appliance is classified as a CLASS 1

LASER product.

The CLASS 1 LASER PRODUCT

MARKING is located on the rear

exterior.

For the customers in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK,

DO NOT USE THIS POLARIZED AC

PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO

PREVENT BLADE EXPOSURE.

Welcome!

Thank you for purchasing the Sony

Compact Disc Player. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

About This Manual

The instructions in this manual are for

models CDP-CE335 and CDP-CE235.

The CDP-CE335 is the model used for

illustration purposes, unless otherwise

mentioned. Any difference in operation

is clearly indicated in the text, for

example, “CDP-CE335 only.”

Conventions

• Instructions in this manual describe

the controls on the player.

You can also use the controls on the

remote if they have the same or

similar names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

(Note that the CDP-CE235

cannot do the tasks marked

with this icon.)

Indicates hints and tips for

making the task easier.

Getting Started

TABLE OF CONTENTS

Getting Started

Unpacking............................................................................................................................ 4

Hooking Up the System..................................................................................................... 4

Playing a CD............................................................................................................................ 6

Playing CDs

Using the Display ............................................................................................................... 8

Replacing Discs While Playing a Disc ............................................................................. 9

Locating a Specific Disc ..................................................................................................... 9

Locating a Specific Track or a Particular Point in a Track ..........................................10

Playing Repeatedly........................................................................................................... 11

Playing in Random Order (Shuffle Play) ......................................................................11

Creating Your Own Program (Program Play).............................................................. 12

Recording From CDs

Recording Your Own Program....................................................................................... 14

Recording a CD by Specifying Tape Length (Time Edit)............................................14

Fading In or Out................................................................................................................15

Adjusting the Recording Level (Peak Search) .............................................................. 16

Additional Information

Precautions ........................................................................................................................ 17

Notes on CDs..................................................................................................................... 17

Troubleshooting ................................................................................................................18

Specifications .....................................................................................................................18

Index

Index ................................................................................................................................... 19

Getting Started

Unpacking

Check that you received the following items:

• Audio connecting cord (1)

• Remote commander (remote) (1) (CDP-CE335 only)

• R6 (size AA) batteries (2) (CDP-CE335 only)

Inserting batteries into the remote (CDP-

CE335 only)

You can control the player using the supplied remote.

Insert two R6 (size AA) batteries by matching the +

and – on the batteries. When using the remote, point it

at the remote sensor g on the player.

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each

component before making the connections.

CD player

Amplifier

: Signal flow

White

(L)

Red

(R)

White

(L)

Red

(R)

What cords will I need?

Audio cord (supplied) (1)

Line output

(L)

Line output

(R)

Audio input

(L)

Audio input

(R)

To an AC outlet

When to replace batteries

With normal use, the batteries should last for about six

months. When the remote no longer operates the player,

replace all the batteries with new ones.

Notes

• Do not leave the remote near an extremely hot or humid

place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

Getting Started

Hookups

When connecting an audio cord, be sure to match the

color-coded cord to the appropriate jacks on the

components: Red (right) to Red and White (left) to

White. Be sure to make connections firmly to avoid

hum and noise.

Amplifier

CD player

You can adjust the output level to the amplifier (CDP-

CE335 only)

Press LINE OUT LEVEL +/– on the remote. You can

reduce the output level up to –20 dB.

When you reduce the output level, “ATT.” appears in the

display.

When you turn off the player, the output level

automatically returns to the maximum level.

Note

If you press the LINE OUT LEVEL +/– buttons on the

remote while recording, the recording level will change

even when it is preset on the tape deck, etc.

• If you have a digital component such as a digital

amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL)

connector using the optical cable (not supplied). Take off

the cap and plug in the optical cable.

Note that you cannot use fading in or out (page 15) and

Time Fade (page 15) functions when making this

connection.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Transporting the player

Before transporting the player, follow the procedure

below to return the internal mechanisms back to their

original position.

1 Remove all the discs from the disc tray.

2 Press § OPEN/CLOSE to close the disc tray.

“no dISC” appears in the display.

3 Wait for 10 seconds, then press 1/u (Power) to

turn off the player.

POC-15

Optical cable (not supplied)

Note

When you connect via the DIGITAL OUT (OPTICAL)

connector, noise may occur when you play CD software other

than music, such as a CD-ROM.

Digital component

INPUT

LINE

OUT

DIGITAL

OUT

OPTICAL

DIGITAL

INPUT

OPTICAL

CD player

Setting the voltage selector (voltage

selector equipped models only)

Check that the voltage selector on the rear panel of the

player is set to the local power line voltage. If not, set

the selector to the correct position using a screwdriver

before connecting the AC power cord to a wall outlet.

220 - 240 V 110 - 120 V

Basic Operations

Playing a CD

With the label side up

Disc number

• See pages 4 – 5 for the hookup

information.

The player plays

All discs in the player consecutively in the order of

disc number

Only the disc you’ve selected

3465

Turn on the amplifier and select the CD player position so that

you can listen to the sound from this player.

Press 1/u (Power) to turn on the player.

Press § OPEN/CLOSE, and place a disc on the disc tray.

To place other discs, press DISC SKIP and place the discs in the

order you want to play.

Each time you press the button, the disc tray turns and you can

place the discs in the empty disc compartments. The player

plays the disc in front of you first.

Press CONTINUE to select ALL DISCS or 1 DISC Continuous

Play mode.

Each time you press the CONTINUE button, “ALL DISCS” or

“1 DISC” appears in the display.

When you select

ALL DISCS

1 DISC

REPEAT

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

OPEN/CLOSE

DISC

SKIP

CHANGE

AMS

TIME

FADER

MUSIC SCAN

CLEARCHECK

DISC CHECK

PUSH ENTER

CONTINUE SHUFFLE PROGRAM

TIME FADE

EDIT/

PEAK

Basic Operations

Press ·.

The disc tray closes and the player plays all the tracks once

(Continuous Play). Adjust the volume on the amplifier.

You can select the disc you

want to start playing first

Press one of the DISC 1 – 5

buttons.

You can adjust the output

level to the amplifier (CDP-

CE335 only)

Press LINE OUT LEVEL +/–

on the remote. You can

reduce the output level up to

–20 dB.

When you reduce the output

level, “ATT.” appears in the

display.

When you turn off the

player, the output level

automatically returns to the

maximum level.

Note

If you press the LINE OUT

LEVEL +/– buttons on the

remote while recording, the

recording level will change

even when it is preset on the

tape deck, etc.

To stop playback

Press p.

Pause

Resume play after pause

Go to the next track

Go back to the preceding track

Go to the next disc

Select a disc directly

Stop play and remove the CD

You need to

Press P

Press P or ·

Turn ≠ AMS ±clockwise

Turn ≠ AMS ± counterclockwise

Press DISC SKIP

Press DISC 1 – 5

Press § OPEN/CLOSE

DISC 1 – 5

·PpDISC SKIP

§ OPEN/CLOSE

≠ AMS ±

CONTINUE SHUFFLE PROGRAM REPEAT

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

OPEN/CLOSE

DISC

SKIP

CHANGE

AMS

TIME

FADER

MUSIC SCAN

CLEARCHECK

DISC CHECK

PUSH ENTER

TIME FADE

EDIT/

PEAK

Playing CDs

Using the Display

You can check information about the disc using the

display.

Playing CDs

Display information while playing a disc

While playing a disc, the display shows the current

disc number, track number, playing time of the track

and the music calendar.

Current disc number

Music calendar

Current track number

Playing time

The track numbers in the music calendar disappear

after they are played.

Checking the remaining time

Each time you press the TIME button while playing a

disc, the display changes as shown in the chart below.

12345

678910

1 2 3 4 5

DISCSALL

DISC

TRACK

MIN

SEC

1 1

156

Playing time and

number of the

current track

Press TIME.

Remaining time

on the current

track

If the track number exceeds 24,

“––.––” appears instead of the

remaining time.

Press TIME.

Remaining time

on the disc

This information is available only in

Continuous Play mode.

Press TIME.

TIME

Checking the total number and playing

time of the tracks

Press TIME before you start playing.

The display shows the current disc number, the total

number of tracks, total playing time and music

calendar.

The information also appears when you press the

§ OPEN/CLOSE button to close the disc tray.

The tracks numbered over 20 cannot be displayed in

the music calendar.

Notes on the disc number indications

• The red circle around a disc number indicates the disc is

ready to be played.

• When all the tracks on a disc have been played, the semi-

circle around the disc number disappears.

• When a disc compartment is recognized as empty, the semi-

circled disc number disappears.

12345

678910

1 2 3 4 5

DISCSALL

DISC

TRACK

MIN

SEC

1 10

45 28

Total number of tracks

Music calendar

Total playing timeCurrent disc number

12345

678910

1 2 3 4 5

DISCSALL

DISC

TRACK

MIN

SEC

1 1 156

12345

678910

1 2 3 4 5

DISCSALL

DISC

TRACK

MIN

SEC

1 1 157 -

12345

678910

1 2 3 4 5

DISCSALL

DISC

TRACK

MIN

SEC

1 43 32-

Playing CDsPlaying CDs

DISC SKIP

1 Press EX-CHANGE.

The disc tray opens and two disc compartments

appear. Even if the player is playing a disc, it

doesn’t stop playing.

2 Replace discs in the compartments with new ones.

The player plays the disc on the left side

compartment after the current disc, and then the

one on the right side compartment.

3 Press DISC SKIP.

The disc tray turns and other two disc

compartments appear.

4 Replace discs in the compartments with new ones.

5 Press EX-CHANGE.

The disc tray closes.

While the disc tray is open by pressing the EX-CHANGE

button

• If the playback of the current disc ends, the player stops

playing. If the disc is played in 1 DISC Repeat Play mode

(see page 11), the current disc starts playing again.

• In ALL DISCS Shuffle Play mode (see page 11), tracks are

reshuffled on the current disc.

• In Program Play mode (see page 12), only the tracks on the

current disc are played.

• Do not push the disc tray to close it in Step 5, as you may

damage the player.

Replacing Discs While Playing

a Disc

You can open the disc tray while playing a disc so that

you can check what discs are to be played next and

replace discs without interrupting playback of the

current disc.

To locate

The next disc

A specific disc directly

A disc while checking the

labels

A disc by scanning the first

track of each disc for 10

seconds

You can extend the playing time during scanning the

discs

Press DISC CHECK repeatedly until the playing time

you want (10, 20 or 30) appears in the display. Each time

you press the button, the playing time changes cyclically.

Notes

• When you press the DISC CHECK button, the play mode

automatically changes to ALL DISCS Continuous Play

mode.

• When you’ve opened the disc tray by pressing the

EX-CHANGE button, you cannot use the DISC CHECK

function.

• Even if you press the DISC CHECK button while

“REPEAT” appears in the display (see page 11), the player

stops after scanning all the discs once.

Press

DISC SKIP while playing a disc

DISC 1 – 5

DISC CHECK while the disc

tray is open. The disc tray turns

to show you each disc label.

When the disc you want comes

in front of you, press · to

start playing.

DISC CHECK before you start

playing while the disc tray is

closed. When you find the disc

you want, press · to start

playing.

EX-CHANGE

DISC 1 – 5 DISC CHECK · DISC SKIP

Locating a Specific Disc

You can locate any disc before or while playing a disc.

Playing CDs

Locating a Specific Track or a

Particular Point in a Track

You can quickly locate any track while playing a disc

using the AMS (Automatic Music Sensor) control or

number buttons on the remote. You can also locate a

specific point in a track while playing a disc.

When you directly locate a track numbered over 10

(CDP-CE335 only) Z

Press >10 first, then the corresponding number buttons

on the remote. To enter “0,” use button 10/0.

Example: To play track number 30

Press >10 first, then 3 and 10/0.

You can extend the playing time during Music Scan

Press MUSIC SCAN repeatedly until the playing time

you want (10, 20 or 30) appears in the display. Each time

you press the button, the playing time changes cyclically.

Note

If “ ” appears in the display, the disc has reached the end

while you were pressing the ) button. Press 0 or turn

≠ AMS ± counterclockwise to go back.

≠ AMS ±

MUSIC SCAN

0/)

(CDP-CE335 only)

=/+

0/)

>10

To locate

The next or

succeeding tracks

The current or

preceding tracks

A specific track

directly (CDP-

CE335 only) Z

A track by scanning

each track for 10

seconds

(Music Scan)

A point while

monitoring the sound

A point quickly by

observing the display

during pause

You need to

Turn ≠ AMS ± clockwise until

you find the track. When using the

remote, press + repeatedly until you

find the track.

Turn ≠ AMS ± counterclockwise

until you find the track. When using

the remote, press = repeatedly until

you find the track.

Press the number button of the track

on the remote

Press MUSIC SCAN before you start

playing. When you find the track you

want, press · to start playing.

Press ) (forward) or 0 (backward)

and hold down until you find the

point

Press ) (forward) or 0 (backward)

and hold down until you find the

point. You will not hear the sound

during the operation.

Number buttons

Playing CDsPlaying CDs

Playing in Random Order

(Shuffle Play)

You can have the player “shuffle” tracks and play in a

random order. The player shuffles all the tracks on all

discs or on the disc you’ve specified.

Playing Repeatedly

You can play discs/tracks repeatedly in any play

mode.

Press REPEAT while playing a disc.

“REPEAT” appears in the display. The player repeats

the discs/tracks as follows:

When the disc is played in

Continuous Play

(ALL DISCS) (page 6)

Continuous Play

(1 DISC) (page 6)

Shuffle Play

(ALL DISCS) (page 11)

Shuffle Play

(1 DISC) (page 12)

Program Play (page 12)

To cancel Repeat Play

Press REPEAT repeatedly until “REPEAT” disappears from

the display.

Repeating the current track

You can repeat only the current track while the disc is

played in any play mode.

While the track you want is being played, press

REPEAT repeatedly until “REPEAT 1” appears in the

display.

The player repeats

All the tracks on all discs

All the tracks on the current

disc

All the tracks on all discs in

random orders

All the tracks on the current

disc in random orders

The same program

DISC 1 – 5

SHUFFLE

Shuffle Play on all discs

You can play all tracks on all discs in a random order.

1 Press SHUFFLE repeatedly until “ALL DISCS”

appears in the display.

2 Press · to start ALL DISCS Shuffle Play.

The indication appears while the player is

“shuffling” the tracks.

To cancel Shuffle Play

Press CONTINUE.

You can start Shuffle Play while playing

Press SHUFFLE, and Shuffle Play starts from the current

track.

You can specify discs during Shuffle Play (Select

Shuffle Play)

You can specify discs during ALL DISCS Shuffle Play

mode, and the tracks on the specified discs are played in

a random order.

Press DISC 1 – 5 to specify the discs after Step 1.

Semi-circles appear around the specified disc numbers in

the display. To cancel the selected discs, press DISC 1 – 5

again. The semi-circles disappear.

To return to ALL DISCS Shuffle Play, press SHUFFLE

twice.

REPEAT

Playing CDs

Shuffle Play on one disc

You can play all tracks on the specific disc in a random

order.

1 Press SHUFFLE repeatedly until “1 DISC” appears

in the display.

2 Press DISC 1 – 5 to start 1 DISC Shuffle Play on

the selected disc.

The indication appears while the player is

“shuffling” the tracks.

To cancel Shuffle Play

Press CONTINUE.

You can start Shuffle Play while playing

Press SHUFFLE, and Shuffle Play starts from the current

track.

Creating Your Own Program

(Program Play)

You can arrange the order of the tracks on the discs

and create your own program. The program can

contain up to 32 “steps” — one “step” may contain a

track or a whole disc.

CLEAR

CHECK

1 Press PROGRAM.

“PROGRAM” appears in the display.

If a program is already stored, the last step of the

program appears in the display. When you want to

erase the whole program, hold down CLEAR until

“ALL CLr” appears in the display (see page 13).

2 Press DISC 1 – 5 to select the disc.

“AL” in the display stands for “all” tracks.

When you want to program the whole disc as one

step, skip Steps 3 to 4, and go to Step 5.

3 Turn ≠ AMS ± until the track number you

want appears in the display.

The track number being programmed flashes and

the total playing time including the track appears

in the display.

Total playing time

Track number

being programmed

12345

678910

1 2 3 4 5

PROGRAM

DISC

TRACK

MIN

SEC

1 AL

42 11

≠ AMS ±

DISC 1 – 5

PROGRAM

1 2 3 4 5

PROGRAM

DISC

TRACK

MIN

SEC

1 5

13 18

Playing CDsPlaying CDs

4 Push ≠ AMS ± to select the track.

If you’ve made a mistake

Press CLEAR, then repeat Steps 3 and 4.

5 To program other discs or tracks, do the following:

To program

Other discs

Other tracks on the same disc

Other tracks on other discs

6 Press · to start Program Play.

To cancel Program Play

Press CONTINUE.

You can create your program while checking the disc

labels

While the disc tray is open, follow Steps 1 to 6 with

pressing the DISC SKIP button to check the disc labels. If

you close the disc tray before Step 6, the total playing

time appears in the display after a while.

Note that, if the programmed track number isn’t found

on the disc, that step is automatically erased.

The program remains even after the Program Play

ends

When you press the · button, you can play the same

program again.

After one second

Total playing time

Programmed tracks

Repeat Step(s)

3 and 4

2 through 4

The program remains until you erase it or turn off the

player

If you replace discs, the programmed disc and track

numbers remain. So, the player plays only the existing

disc and track numbers. However, the disc and track

numbers that aren’t found in the player or on the disc are

deleted from the program, and the rest of the program is

played in the programmed order.

Note

The total playing time doesn’t appear when:

—You have programmed a track whose number exceeds 20.

—The total playing time of the program exceeds 200 minutes.

Checking the track order

You can check your program before or after you start

playing.

Press CHECK.

Each time you press this button, the display shows the

track (the disc and track numbers) or the disc (the disc

number and “AL” indication) of each step in the

programmed order. After the last step in the program,

the display shows “End” and returns to the original

display. If you check the order after you start playing,

the display shows only the remaining steps.

Changing the track order

You can change your program before you start playing.

Erase a track

Erase the last track in the

program

Add tracks to the end of the

program

Change the whole program

completely

You need to

Press CHECK until the track

you don’t want appears in

the display, then press

CLEAR

Press CLEAR. Each time you

press the button, the last

track will be cleared.

Follow Steps 2 through 4 of

the programming procedure

Hold down CLEAR until

“ALL CLr” appears in the

display. Create a new

program following the

programming procedure.

1 2 3 4 5

PROGRAM

DISC

TRACK STEP

1 5 3

1 2 3 4 5

PROGRAM

DISC

TRACK

MIN

SEC

1 5 13 18

Last programmed

track

Playing order

Recording From CDs

Recording Your Own Program

You can record the program you’ve created on a tape,

etc. The program can contain up to 32 steps.

By inserting a pause during programming, you can

divide the program into two for recording on both

sides of a tape.

1 Create your program (for side A when recording

on a tape) while checking the total playing time

indicated in the display.

Follow Steps 1 to 5 in “Creating Your Own

Program” on page 12.

The indication appears in the display.

2 When you record on both sides of the tape, press

P to insert a pause.

The “P” and indications appear in the display

and the playing time is reset to “0.00.”

When you record on one side of the tape, skip this

step and go to Step 4.

A pause is counted as one step

You can program up to 31 steps when you insert a pause.

3 Repeat Steps 2 to 5 in “Creating Your Own

Program” on page 12 to create the program for

side B.

4 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the player

pauses at the end of the program for side A.

5 When you record on side B, reverse the tape and

press · or P on the player to resume playing.

To check and change your program

See page 13.

The indication appears while checking the program

for side A and while checking the program for side

Recording a CD by Specifying

Tape Length (Time Edit)

You can have the player create a program that will fit

the length of the tape.

The player automatically creates a program, keeping

the original order of the disc.

The program can contain up to 32 steps (a pause

inserted between steps is counted as one step).

Note that tracks numbered over 20 cannot be

programmed automatically.

1 Press DISC SKIP to select the disc.

2 Press EDIT/TIME FADE repeatedly before you

start playing until “EDIT” appears and “A” in the

indication flashes in the display.

3 Press 0 or ) to specify the tape length.

Each time you press these buttons, the display

changes as shown below, with the tape length of

one side following each indication.

n C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N

(23.00) (27.00) (30.00) (37.00) (45.00)

4 Press EDIT/TIME FADE to have the player create

the program.

The display shows the tracks to be recorded. “B” in

the indication flashes in the display.

5 When you record on both sides of the tape, press

EDIT/TIME FADE again.

The player inserts a pause, then creates the

program for side B. The display shows the

programmed tracks.

When you record on one side of the tape, skip this

step.

6 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the

player pauses at the end of the program for side A.

PROGRAM

≠ AMS ±

DISC 1 – 5

0/)

EDIT/TIME FADE

DISC SKIP

·P

A B

Recording From CDs

Recording From CDsRecording From CDs

Recording From CDs

7 Reverse the tape to side B and press · or P on

the player to resume playing the remaining tracks.

To cancel Time Edit

Press CONTINUE.

You can program the tracks you want in advance

Select the tracks before doing the above procedure. The

player creates a program from the remaining tracks.

You can freely specify the tape length

Set the tape length using the ≠ AMS ± control.

Example: When the tape length of one side is 30 minutes

and 15 seconds

1 To set the minutes, turn ≠ AMS ± until

“30” appears in the display, then push

≠ AMS ±.

2 To set the seconds, turn ≠ AMS ± until

“15” appears in the display, then push

≠ AMS ±.

You can check and change the program

See page 13.

Fading In or Out

You can manually fade in or out to prevent tracks from

starting or ending abruptly.

Note that you cannot use this effect when you use the

DIGITAL OUT (OPTICAL) connector.

Start play fading in

End play fading out

Note

Fading lasts for about 5 seconds. However, when you press

the FADER button during Music Scan (see page 10), the play

fades out for about 2 seconds.

Fading out at the specified time

(Time Fade)

You can have the player fade out automatically by

specifying the playing time. Once you set the Time

Fade, it works twice, that is, the play fades out at the

end of both sides of a tape.

1 Press EDIT/TIME FADE repeatedly before you

start playing until and “A” in the

indication appear in the display.

2 Press 0 or ) to specify the playing time.

Each time you press these buttons, the display

changes as shown below, with the playing time of

one side following each indication.

n C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N

(23.00) (27.00) (30.00) (37.00) (45.00)

EDIT/TIME FADE

0/)

FADER

(Continued)

FADE

TIME

Press FADER

During pause. lights up in the

display and the Q indication flashes.

The play fades in.

When you want to start fading out.

lights up in the display and the

q indication flashes. The play fades

out and the player pauses.

FADE

Recording From CDs

3 Press · to start playing.

At the specified time the play fades out and the

player pauses. “B” in the indication appears

in the display.

4 Reverse the tape to side B and press · or P on

the player to resume playing the remaining tracks.

Again, the play fades out at the specified time.

To cancel Time Fade

Press EDIT/TIME FADE.

You can freely specify the playing time

See “You can freely specify the tape length” on page 15.

You can change discs during Time Fade

If the play ends before the specified fade-out time, (for

example, when you record CD-singles on a tape) change

the disc. The specified fade-out time is counted only

during playing.

You can fade in to resume playing in Step 4

After you reverse the tape, press FADER.

Note

If you press the 0 or ) button during Time Fade Play,

Time Fade will be cancelled.

Adjusting the Recording Level

(Peak Search)

The player locates the highest level among the tracks to

be recorded to let you adjust the recording level before

you start recording.

PEAK SEARCH p

1 Before you start playing, press PEAK SEARCH.

“PEAK” flashes in the display and the player

repeats the portion of the highest level.

After scanning all the tracks, the player repeats the

portion with the highest peak level.

2 Adjust the recording level on the deck.

3 Press p on the player to stop Peak Search.

“PEAK” disappears from the display.

Notes

• The portion with the highest level may differ every time

you try the adjustment on the same disc. The difference is,

however, so slight that you won’t find any problem in

adjusting the recording level precisely.

• Peak Search does not operate while you open the disc tray

by pressing the EX-CHANGE button.

Additional Information

Notes on CDs

On handling CDs

• To keep the disc clean, handle the disc by its edge. Do not

touch the surface.

• Do not stick paper or tape on the disc.

• Do not expose the disc to direct sunlight or heat sources

such as hot air ducts, nor leave it in a car parked in direct

sunlight as there can be considerable rise in temperature

inside the car.

• Do not use any commercially available stabilizer. If you do,

the disc and the player may be damaged.

• After playing, store the disc in its case.

On cleaning

• Before playing, clean the disc with a cleaning cloth. Wipe

the disc from the center out.

• Do not use solvents such as benzine, thinner, commercially

available cleaners or anti-static spray intended for vinyl

LPs.

Precautions

On safety

• Caution — The use of optical instruments with this product

will increase eye hazard.

• Should any solid object or liquid fall into the cabinet,

unplug the player and have it checked by qualified

personnel before operating it any further.

On power sources

• Before operating the player, check that the operating

voltage of the player is identical with your local power

supply. The operating voltage is indicated on the

nameplate at the rear of the player.

• The player is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even if

the player itself has been turned off.

• If you are not going to use the player for a long time, be

sure to disconnect the player from the wall outlet. To

disconnect the AC power cord (mains lead), grasp the plug

itself; never pull the cord.

• AC power cord must be changed only at the qualified

service shop.

On placement

• Place the player in a location with adequate ventilation to

prevent heat build-up in the player.

• Do not place the player on a soft surface such as a rug that

might block the ventilation holes on the bottom.

• Do not place the player in a location near heat sources, or in

a place subject to direct sunlight, excessive dust or

mechanical shock.

On operation

• If the player is brought directly from a cold to a warm

location, or is placed in a very damp room, moisture may

condense on the lenses inside the player. Should this occur,

the player may not operate properly. In this case, remove

the disc and leave the player turned on for about an hour

until the moisture evaporates.

On adjusting volume

• Do not turn up the volume while listening to a portion with

very low level inputs or no audio signals. If you do, the

speakers may be damaged when a peak level portion is

played.

On cleaning

• Clean the cabinet, panel and controls with a soft cloth

slightly moistened with a mild detergent solution. Do not

use any type of abrasive pad, scouring powder or solvent

such as alcohol or benzine.

If you have any questions or problems concerning your

player, please consult your nearest Sony dealer.

Additional Information

Troubleshooting

If you experience any of the following difficulties while

using the player, use this troubleshooting guide to help

you remedy the problem. Should any problem persist,

consult your nearest Sony dealer.

There’s no sound.

/Check that the player is connected securely.

/Make sure you operate the amplifier correctly.

/Adjust the playback level using the LINE OUT

LEVEL +/– buttons on the remote (CDP-CE335

only).

The CD does not play.

/There’s no CD inside the player (“no dISC”

appears). Insert a CD.

/Place the CD with the label side up on the disc

tray correctly.

/Clean the CD (see page 17).

/Moisture has condensed inside the player.

Remove the disc and leave the player turned on

for about an hour (see page 17).

/Place the CD in the correct position on the disc

tray.

The remote does not function. (CDP-CE335 only)

/Remove the obstacles in the path of the remote

and the player.

/Point the remote at the remote sensor g on the

player.

/Replace all the batteries in the remote with new

ones if they are weak.

The player functions incorrectly.

/The microcomputer chips may be operating

incorrectly. Turn the power off, then turn it

back on to reset the player.

Specifications

Compact disc player

Laser Semiconductor laser (λ = 780 nm)

Emission duration: continuous

Laser output Max 44.6 µW*

* This output is the value measured at

a distance of 200 mm from the

objective lens surface on the Optical

Pick-up block with 7 mm aperture.

Frequency response 2 Hz to 20 kHz ± 0.5 dB

Signal-to-noise ratio More than 102 dB

Dynamic range More than 98 dB

Harmonic distortion Less than 0.0045%

Output

LINE OUT

DIGITAL OUT

(OPTICAL)

Jack

type

Phono

jacks

Optical

output

connector

Maximum

output

level

2 V

(at 50 kilohms)

–18dBm

Load

impedance

Over 10 kilohms

Wave length: 660nm

General

Power consumption 14 W

Dimensions (approx.) 430 × 120 × 385 mm

(w/h/d) (17 × 4 3/4 × 15 1/4 in.) incl. projecting

parts

Mass (approx.) 5.4 kg (11 lbs 15 oz)

Supplied accessories

Audio cord (2 phono plugs – 2 phono plugs) (1)

Remote commander (remote) (1) (CDP-CE335 only)

R6 (size AA) batteries (2) (CDP-CE335 only)

Design and specifications are subject to change without notice.

Power requirements

Where purchased

Canada

Europe and some Asian

countries

Other countries

Power requirements

120 V AC, 60 Hz

220 V – 230 V AC, 50/60 Hz

110 V – 120 V or 220 V – 240

V AC, adjustable, 50/60 Hz

Additional Information

Index

A, B

AMS 10

Automatic Music Sensor. See

AMS

C, D

Connecting 4

Continuous Play 6

Editing. See Recording

F, G

Fading 15

Time Fade 15

H, I, J, K

Handling CDs 17

Hookups 4

overview 4

Locating

by monitoring 10

by observing the

display 10

by scanning 10

directly 10

using AMS 10

while checking the labels 9

M, N, O

Music Scan 10

P, Q

Peak search 16

Playback

Continuous Play 6

Program Play 12

Repeat Play 11

Shuffle Play 11

Program 12

changing 13

checking 13

for recording 14

Recording 14

a program 14

using Time Edit 14

Remaining time 8

Remote control 4

Repeating 11

Replacing discs while playing

a disc 9

Names of controls

Buttons

CHECK 13

CLEAR 13

CONTINUE 6

DISC 1 – 5 9

DISC CHECK 9

DISC SKIP 7

EDIT/TIME FADE 14, 15

EX-CHANGE 9

FADER 15

LINE OUT LEVEL +/– 5

MUSIC SCAN 10

Number 10

§ OPEN/CLOSE 6

PEAK SEARCH 16

PROGRAM 12

REPEAT 11

SHUFFLE 11

TIME 8

· 7

P 7

p 7

0/) 10

=/+ 10

> 10 10

Switch

1/u (Power) 6

Control

≠ AMS ± 7

Others

Disc tray 6

Display 8

g 4

Scanning. See Music Scan

Searching. See Locating

Select Shuffle Play 11

Shuffle Play 11

Time Edit 14

Time Fade 15

Total playing time 8

Troubleshooting 18

U, V, W, X, Y, Z

Unpacking 4

Voltage Selector 5

Index

AVERTISSEMENT

Pour prévenir tout risque

d’incendie ou d’électrocution,

gardez cet appareil à l’abri de

la pluie ou de l’humidité.

Pour prévenir tout risque

d’électrocution, abstenez-vous

d’ouvrir le boîtier. Confiez

l’entretien de votre lecteur

exclusivement à un personnel

qualifié.

Le composant laser de cet appareil est

capable d’émettre des radiations

dépassant la limite pour la Classe 1.

Cet appareil entre dans la catégorie des

produits LASER DE CLASSE 1.

L’ETIQUETTE INDIQUANT

L’APPARTENANCE DE CE LECTEUR

A LA CLASSE 1 est apposée à l’arrière

du boîtier.

Pour les utilisateurs au Canada

ATTENTION

POUR PREVENIR LES CHOCS

ELECTRIQUES, NE PAS UTILISER

CETTE FICHE POLARISEE AVEC

UN PROLONGATEUR, UNE PRISE

DE COURANT OU UNE AUTRE

SORTIE DE COURANT, SAUF SI

LES LAMES PEUVENT ETRE

INSEREES A FOND SANS EN

LAISSER AUCUNE PARTIE A

DECOUVERT.

A propos de ce

manuel

Les instructions contenues dans le

présent mode d’emploi concernent les

modèles CDP-CE335 et CDP-CE235. Sauf

mention contraire, c’est le CDP-CE335

qui a été utilisé pour les illustrations.

Toute différence de fonctionnement est

clairement précisée dans le texte, par

exemple : “CDP-CE335 uniquement”.

Conventions

• Les instructions fournies dans ce

manuel portent sur les commandes du

lecteur.

Vous pouvez également utiliser les

commandes que comporte votre

télécommande si celles-ci portent le

même nom ou un nom similaire à

celles de votre lecteur de disques

compacts.

• Les symboles suivants apparaissent

dans ce mode d’emploi:

Indique que vous pouvez

effectuer l’opération à l’aide

de la télécommande.

(Attention que le CDP-CE235

ne peut exécuter les opérations

signalées par cette icone.)

Ce symbole indique un conseil

ou une astuce facilitant

l’opération envisagée.

Bienvenue !

Nous vous remercions d’avoir fait

l’acquisition de ce lecteur de disques

compacts Sony. Avant de faire

fonctionner cet appareil, nous vous

recommandons de lire attentivement le

présent mode d’emploi et de le conserver

pour toute référence ultérieure.

La page charge ...

Sony CDP-CE335 Manuel utilisateur

Marque: Sony

Modèle: CDP-CE335

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Sony CDP-CE335 User manual
español: Sony CDP-CE335 Manual de usuario

Sony CDP-CE335 Manuel utilisateur

Sony CDP-CE335 Manuel utilisateur

dans d''autres langues

Documents connexes