LG BSNQ0964NA0 Le manuel du propriétaire

P/NO : MFL68301205

*MFL68301205*

Rev : 01

Date : 03.2014

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating

your set and retain it for future reference.

www.lg.com

TYPE : WALL MOUNTED

2

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air

below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more

electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

y to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air con-

ditioner is used for many hours.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty

purposes. Write the model number and the serial number here:

Model number :

Serial number :

Dealer’s name :

Date of purchase :

SAFETY PRECAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

in hazards to you and others.

• Installation MUST conform with local building codes or, in the absence of local codes, with

the Nation Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical

Code Part1 CSA C.22.1.

• The information contained in the manual is intended for use b

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal-

function, property damage, personal injury and/or death.

Installation

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-

ure to do so may result in electric shock or product failure.

• Contact an authorized service center when you install or relocate the air conditioner. Failure to

do so may result in serious injury or product failure.

• Always use a power plug and socket with a ground terminal.Failure to do so may result in

electric shock or product failure

• Install the panel and the cover of the control box safely. Failure to do so may result in explo-

• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure

to do so may result in electric shock or product failure.

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-

ure to do so may result in electric shock or product failure.

• Do not modify or extend the power cable. If the power cable or cord has scratches or skin

peeled oﬀ or deteriorated then it must be replaced. It may resu

• Be cautious when you unpack or install the air conditioner. Failure to do so may result in seri-

ous injury or product failure.

• Do not install the air conditioner on an unstable surface or where there may be a danger of it

falling. It may result in death, serious injury, or product failure.

!

3

Rev : 01

Date : 03.2014

4

SAFETY PRECAUTIONS

Operation

• Do not let the air conditioner run for a long time when the humidity is very high or when a door or

window has been left open. Failure to do so may result in product failure.

• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Fail-

ure.

• Do not place any objects on the power cord. It may result in electric shock or product failure.

• Do not turn on or oﬀ the air conditioner by plugging in or unplugging the power plug. It may result in

• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or

product failure.

• Do not place a heater or other heating appliances near the po

shock, or product failure.

• Do not allow water to run into the air conditioner. It may re

d thinner near the air conditioner.

• Do not use the air conditioner for an extended period of time in a small place without ventilation.

Ventilate the place regularly. Failure to do so may result in e

• When there is a gas leak, ventilate suﬃciently before using the air conditioner again. Failure to do so

• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to

• Stop operating and close the window in strom or hurricane.If possible remove the product from the

window before hurricane arrives

grille. Failure to do so may result in elec-

tric shock or product failure.

• Contact an authorized service center when the air conditioner

• Be cautious water could not enter the product

• Make sure to ventilate suﬃciently when this air conditioner and a heating appliance such as a heater

rious injury, or product failure.

• Turn the main power oﬀ and unplug the power plug when you clean or repair the air conditioner.

Failure to do so may result in death, serious injury, or product failure.

• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure

to do so may result in product failure.

• For inner cleaning, contact an Authorized Service Center or a dealer.

Do not use harsh detergent that causes corrosion or damage on the unit.

tronic shock.

Rev : 01

Date : 03.2014

SAFETY PRECAUTIONS

CAUTION

Installation

• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure

to do so may result in product failure.

• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result

in product failure.

• Keep level even when installing the product.

• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not incon-

between neighbors.

• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may re-

sult in serious injury.

• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may re-

sult in product failure.

Operation

• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may re-

sult in serious injury.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. It

shock.

explosion or product failure.

• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water.

Use a smooth cloth. It may result in serious injury or product failure.

• Never touch the metal parts of the air conditioner when you r

rious injury or product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

ter every two weeks or more often if

necessary.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operat-

ing. It may result in electric shock.

• Do not drink the water drained from the air conditioner. It may result in serious health complications.

• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure

to do so may result in serious injury or product failure.

• Do not mix the batteries for the remote control with other types of batteries or mix new batteries

with used batteries. Failure to do so may result in product failure.

• Do not recharge or disassemble the batteries. Failure to do s

injury.

. If your cloth or skin is exposed to the

to do so may result in serious injury.

ide of your mouth thoroughly and then

consult a doctor. Failure to do so may result in serious health complications.

!

5

TABLE OF CONTENTS

2 TIPS FOR SAVING

3 IMPORTANT SAFETY

INSTRUCTIONS

10 BASIC FUNCTIONS

10 Cooling your room

10 Removing humidity

10 Airing your room

10 Adjusting the fan speed

11 Adjusting the air ﬂow direction

11 Setting the timer

12 ADVANCED FUNCTIONS

12 Changing room temperature quickly

12

14 MAINTENANCE

15 Cleaning the air ﬁlter

16 TROUBLESHOOTING

16 Self-diagnosis function

16 Before requesting service

TABLE OF CONTENTS

6

7 BEFORE USE

7 Components

8 Inserting batteries

8 Ins

8 Operating method

talling the remote control holder

9 USING THE REMOTE

CONTROL

Generator mode operation

13 Operating the air conditioner without the

remote control

13 Restarting the air conditioner

automatically

ENERGY

BEFORE USE

Components

Outdoor unit

Air Inlet

Signal Receiver

ON/OFF Button

Front Panel

Air Filter

NOTE

!

The number of operation lamps and their locations may vary, depending on the model of the

air conditioner.

7

BEFORE USE

Indoor unit

* The feature can be changed according a type of model.

Air inlet vents

Air outlet vents

Base plate

Coolant piping

Connection wire

Drain hose

* The feature can be changed according a type of model.

Rev : 01

Date : 03.2014

BEFORE USE

8

Inserting batteries

Insert batteries before using the remote

control. The battery type used is AAA (1.5 V).

1 Remove the battery cover.

2 Insert the new batteries and make sure

that the + and - terminals of the batteries

are installed correctly.

3 Reattach the battery cover.

Installing the remote control holder

Install the holder where there is no direct sun-

light to protect the remote control.

1 Choose a safe and easily-accessible place.

2 Fix the holder by fastening the 2 screws

3 Slide the remote control into the holder.

Point the remote control towards the signal

receiver at the bottom of the air conditioner to

operate it.

NOTE

!

If the display screen of the remote control

starts to fade, replace the batteries.

NOTE

!

• The remote control may operate other

electronic devices if pointed towards

them. Make sure to point the remote

control towards the signal receiver of

the air conditioner.

• For proper operation, use a soft cloth to

clean the signal transmitter and receiver.

Operating method

9

USING THE REMOTE CONTROL

Using the remote control

You can operate the air conditioner more conveniently with the remote control.

Wireless remote control

Cooling Operation

Healthy Dehumidiﬁcation

Operation

Air Circulation

Operation Mode

* Some functions may not be supported, depending on the

model.

Control

panel

Display

screen

Description

- O

n/Off button:

Temperature adjustment buttons:

Adjusts the room temperature when

cooling.

O

peration mode selection button :

Selects the operation mode.

Cooling operation ( )

Dehumidifying operation ( )

Air circulation ( )

Jet cooling button: Cools down the in-

door temperature within a short period

of time.

Indoor fan speed button: Adjusts the

fan speed.

-

Air flow direction button: Adjusts the air

Timer :

-

Display

screen

Control

panel

Generator mode button:

input.

Reduce power

Cooling your room

(Cool ing operation)

1 Press to turn on the power.

2 Press repeatedly to select the cooling

operation.

- is displayed on the display screen.

3 Press or to set the desired temper-

ature.

- The temperature range is 18°C - 30°C.

Removing humidity

(Dehumidifying operation)

This mode removes excess moisture from an

environment with high humidity or in the rainy

season, in order to prevent mold from setting

in. This mode adjusts the room temperature

and the fan speed automatically to maintain

the optimal level of humidity.

1 Press to turn on the power.

2 Press repeatedly to select the dehu-

midifying operation.

- is displayed on the display screen.

Airing your room

(Air Circulation operation)

This mode only circulates the indoor air

without changing the room temperature. The

cooling lamp lights up in air circulation mode.

1 Press to turn on the power.

2 Press repeatedly to select air circula-

tion operation.

- is displayed on the display screen.

3 Press to adjust the fan speed.

Adjusting the fan speed

1 Press repeatedly to adjust the fan

speed.

- Select if you want natural air.

The fan speed adjusts automatically.

NOTE

!

• In this mode you cannot adjust the room

temperature, as it is adjusted automati-

cally. Also, the room temperature is not

displayed on the display screen.

BASIC FUNCTIONS

10

Remark Speed

High

Medium

Low

Natural Wind

BASIC FUNCTIONS

11

BASIC FUNCTIONS

Adjusting the air ﬂow direction

1

cally,

tion automatically.

Setting the timer

ditioner automatically.

1 Press to turn on the power.

2 Press repeatedly to select the hour

24 hours)

(The hour increases automatically with

long press.)

- is displayed on the display screen in

this mode.

NOTE

!

cause product failure.

• If you restart the air conditioner, it starts

to operate with the previously set direc-

not match the icon displayed on the re-

mote control. When this occurs, press

again.

ADVANCED FUNCTIONS

12

vanced functions.

Changing room temperature

quickly (Jet Cool)

This mode allows you to cool indoor air

quickly in summer.

1 Press to turn on the power.

2 Press .

- In jet cooling mode, strong air blows out

at a temperature of 18°C for 30 minutes.

ADVANCED FUNCTIONS

Generator mode operation

(Gen Mode)

This mode reduces power input during

the cooling mode.

1 Press to turn on the power.

2

Press

.

NOTE

!

•

When using Generator Power Supply,

air-conditioner must use ‘Gen Mode’.(It may not

operate properly in Normal Mode)

•

When using Generator Power Supply, If there

are many applications being used together,

air-conditioner may not operate properly for

overload on Generator

•

Generator should be maintained properly

according to Manufacture’s Manual.

Non-properly maintained Generator may cause

(Engine Oil, Fuel Level and continuous usage

time should be in Manufacture’ recommended

condition )

•

Due to ‘Gen Mode’, inadequate cooling capacity

may occur.

•

‘Gen Mode’ is memorized.

•

When using Generator Power Source, Outdoor Unit

may operate the outdoor fan Automatically for

protecting the Air-Conditioner

Ex) In case of restarting the Air-Conditioner

during ‘Gen Mode’. It operates ‘Gen Mode’

automatically

13

Operating the air conditioner

without the remote control

unit to operate the air conditioner when the

remote control is unavailable. However, the

fan speed is set to high.

Restarting the air conditioner

automatically

When the air conditioner is turned on again

after a power failure, this function restores the

previous settings. This function is a factory de-

fault setting.

-

seconds.

- The unit will beep twice and the lamp will

blink twice 4 times.

Disabling auto restart

- For cooling-only models, the temperature

is set to 22°C (72°F).

* The feature can be changed according a

type of model.

- To re-enable the function, press the On/

unit will beep twice and the lamp will

blink 4 times.

NOTE

!

for 3 – 5 seconds instead of 6 seconds,

the unit will switch to the test operation.

In the test operation, the unit blows out

strong air for cooling for 18 minutes and

then returns to the factory default set-

tings.

* The feature can be changed according a

type of model.

-

ADVANCED FUNCTIONS

Rev : 01

Date : 03.2014

14

MAINTENANCE

Clean the product regularly to maintain optimal performance and to prevent possible breakdown.

* This may not be provided, depending on the model.

Item Cleaning interval Cleaning method

2 weeks

Indoor unit surface Regularly

Use a soft, dry cloth. Do not use bleach or

abrasives.

Outdoor unit Regularly

Use steam to clean the heat exchanger coils

and the panel vents (consult with technician).

Air ﬁlter

CAUTION

• Turn oﬀ the power and unplug the power cord before you perform any maintenance; other-

wise it may cause electric shock.

lters. It may cause deforma-

tion or discoloration.

may damage the surface of

the product.

!

NOTE

!

the model.

• Make sure to clean the heat exchanger coils of the outdoor unit regularly, as dirt collected

* The feature can be changed according a type of model.

15

MAINTENANCE

Cleaning the air ﬁlter

more if necessary.

1

cord.

2 Open the front grille.

- Lift up both sides of the cover slightly.

3

slightly and remove it from the unit.

4

with warm water.

in lukewarm water with detergent.

5

* The feature can be changed according a

type of model.

* The feature can be changed according a

type of model.

NOTE

!

• For inner cleaning, contact an Authorized

Service center or a dealer. Do not use

harsh detergent that causes corrosion or

damage on the unit. Harsh detergent

electronic shock.

16

TROUBLESHOOTING

Self-diagnosis function

This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit

will blink in 2 second intervals. If this occurs, contact your local dealer or service center.

Before requesting service

Please check the following before you contact the service center. If the problem persists, contact

your local service center.

Problem Possible causes Corrective action

There is a burning smell and

a strange sound coming

from the unit.

-

power cord and contact the service center.

Water leaks from the indoor

unit even when the humidity

level is low.

The power cord is damaged

or generating excessive

heat.

A switch, a circuit breaker

(safety, ground) or a fuse is

not operated properly.

The air conditioner does not

work.

The air conditioner is

unplugged.

Check whether the power cord is plugged

into the outlet.

A fuse is blown or the

power supply is

blocked.

Replace the fuse or check if the circuit

breaker has tripped.

A power failure has

occurred.

failure occurs. When the power is restored,

wait 3 minutes, and then turn on the air

conditioner.

The voltage is too

high or too low.

Check if the circuit breaker has tripped.

The air conditioner

cally at a preset time.

Press the power button again.

TROUBLESHOOTING

17

TROUBLESHOOTING

Problem Possible causes Corrective action

The air conditioner does not

generate cool air.

Air is not circulating

properly.

Make sure that there are no curtains,

blinds or furniture blocking the front of the

air conditioner.

See “Cleaning Air Filter” for more infor-

mation.

The room tempera-

ture is too high.

In summer, it may take some time to cool

indoor air. In this case, select the jet cool

operation to cool indoor air quickly.

Cold air is escaping

from the room.

Make sure that no cold air is escaping

through ventilation points in the room.

The desired tempera-

ture is higher than the

set temperature.

Set the desired temperature to a level

lower than the current temperature.

There is a heating

source nearby.

Avoid using a heat generator such as an

electric oven or a gas burner while the air

conditioner is in operation.

Air circulation opera-

tion is selected.

In the air circulation operation, air blows

from the air conditioner without cooling or

heating the indoor air. Switch the opera-

tion mode to the cooling operation.

It is not possible to adjust

the fan speed.

The auto operation,

jet operation or dehu-

midifying operation is

selected.

In some operation modes, such as the jet

or dehumidifying operation modes, you

cannot adjust the fan speed. Select an op-

eration mode in which you can adjust the

fan speed.

It is not possible to adjust

the temperature.

The air circulation op-

eration or jet opera-

tion is selected.

In some operation modes, such as the air

circulation or jet operation mode, you can-

not adjust the temperature. Select an op-

eration mode in which you can adjust the

temperature.

www.lg.com

TYPE : MURAL

MANUEL D’UTILISATION

CLIMATISEUR

Veuillez lire attentivement ce manuel avant d’utiliser

votre appareil, et le conserver pour toute consultation ultérieure.

2

ASTUCES POUR ECONOMISER L’ENERGIE

Nous vous donnons ici quelques astuces qui vous permettront de minimiser la consommation

d’énergie lorsque vous utilisez le climatiseur. Vous pouvez utiliser un climatiseur de manière plus

• Evitez un refroidissement excessif des unités intérieures. Une telle application pourrait repré-

senter un danger pour votre santé et entraîner une plus grande consommation de courant.

• Evitez d'exposer le climatiseur aux rayons solaires à l’aide des rideaux ou des persiennes lors-

qu’il est en marche.

• Maintenez les portes et les fenêtres complètement fermées lorsque vous utilisez le climati-

seur.

• Ajustez le sens du débit d’air verticalement ou horizontalement pour permettre la circulation

de l’air intérieur.

• Accélérez le ventilateur pour refroidir ou réchauﬀer rapidement l’air intérieur en peu de temps.

• Ouvrez régulièrement des fenêtres pour des besoins d’aération étant donné que la qualité de

l'air intérieur peut se détériorer si vous utilisez le climatiseur pendant plusieurs heures.

• Ouvrez régulièrement des fenêtres pour des besoins d’aération étant donné que la qualité de

l'air intérieur peut se détériorer si vous utilisez le climatiseur pendant plusieurs heures.

Pour vos archives

Agrafez votre reçu sur cette page dans le cas où vous en avez besoin pour prouver la date d’achat ou

pour des besoins de garantie. Ecrivez le numéro du modèle et le numéro de série ici:

Numéro du modèle:

Numéro de série:

Ces numéros sont disponibles sur l’étiquette de chaque côté du climatiseur.

Nom du distributeur:

Date d’achat:

CONSIGNES DE SECURITE IMPORTANTES

LISEZ ENTIEREMENT LES INSTRUCTIONS AVANT D’UTILISER L’APPAREIL.

Respectez toujours les consignes suivantes pour éviter des situations dangereuses et garantir

une performance optimale de votre produit.

ATTENTION

Le non respect de ces consignes peut être fatal ou provoquer des blessures graves.

AVERTISSEMENT

Le non respect de ces consignes peut provoquer des blessures légères ou endommager le pro-

duit.

ATTENTION

• Les travaux d’installation ou de dépannage eﬀectués par des p

poser aux risques en même temps que les autres personnes.

• L’installation DOIT être conforme aux codes de construction locaux, et dans le cas où il n’en existe pas,

au Code National de l’Electricité NFPA 70/ANSI C1-1003 ou à l’édition actuelle et au Code Canadien de

l’Electricité, Partie 1 CSA C.22.1.

• Les informations contenues dans ce manuel sont destinées à un

maîtrise les consignes de sécurité et dispose d’outils et d’instruments de test appropriés.

• Le fait de ne pas lire attentivement et de ne pas respecter les instructions de ce manuel peut provoquer

un dysfonctionnement de l’équipement, des dégâts matériels, des blessures individuelles et/ou la mort.

Installation

• Utilisez un disjoncteur et un fusible standard en conformité aux estimations du climatiseur. Le fait de ne

pas prendre ces mesures peut provoquer un choc électrique ou une défaillance du produit.

• Contactez un centre de service agréé lorsque vous installez le climatiseur ou lorsque vous le réinstallez

ailleurs. Le fait de ne pas prendre ces mesures peut provoquer des blessures graves ou une défaillance

du produit.

ne prise de terre. Le fait de ne pas prendre

ces mesures peut provoquer un choc électrique ou une défaillance du produit.

• Installez le panneau et le couvercle de la boîte de commande de façon sécurisée. Une mauvaise installa-

tion peut provoquer une explosion ou un incendie.

• Installez une sortie électrique et un disjoncteur dédiés avant d'utiliser le climatiseur. Le fait de ne pas

prendre ces mesures peut provoquer un choc électrique ou une défaillance du produit.

• Utilisez un disjoncteur et un fusible standard en conformité aux estimations du climatiseur. Le fait de ne

pas prendre ces mesures peut provoquer un choc électrique ou une défaillance du produit.

i le câble ou le cordon d’alimentation a des

égratignures, s'il est usé ou endommagé, il doit être remplacé. Il peut provoquer un incendie ou un choc

électrique.

• Faites attention lorsque vous déballez et installez le climatiseur. Le fait de ne pas prendre ces mesures

peut provoquer des blessures graves ou une défaillance du produit.

• N’installez pas le climatiseur sur une surface instable où dans un endroit où il peut tomber. Cela peut

provoquer la mort, des blessures graves ou la défaillance du produit.

!

3

Rev : 01

Date : 03.2014

La page charge ...

LG BSNQ0964NA0 Le manuel du propriétaire

Ce manuel convient également à

LG BSNQ0964NA0 Le manuel du propriétaire

dans d''autres langues

Documents connexes