Sanyo DS24424 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
AS
Model No.:
No. de Modelo:
N
o
de modele:
Color TV Owner’s Manual
Color TV Manual Del Propietario
Manuel d’instructions du télécouleur
“Read this manual before assembling
(or using) this product.”
DS24424
Printed in U.S.A. SMC, March 2004
Impreso en U.S.A. SMC, Marzo 2004
Imprimé aux É.-U. SMC, mars 2004
Part No. / No. de Parte/
N
o
de pièce : 1AA6P1P4424––
Service Code/Código de Servicio/
Code de service : 610 312 2373
Importado Por :
Comercializadora México
Americana, S. DE R.L. DE C.V.
Nextengo Nº 78
Col. Santa Cruz Acayucan
Del. Azcapotzalco, México D.F. C.P.
02770, RFC CMA 9109119L0
Telefono: 55-5328-3500
ENERGY STAR
“As an ENERGY STAR
®
Partner, Sanyo
Manufacturing Corporation has determined that
this product meets the ENERGY STAR
®
guidelines for
energy efficiency.”
Important Safety Instructions . . . . . 2
Welcome to the World of Sanyo . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . 3
Basic Set-up and Connections . . . . . 4
Front & Rear Panel . . . . . . . . . . . . . .5
Using the Component Video and
Audio Input Jacks . . . . . . . . . . . . . . . 6
Using the Front A/V Input Jacks . . . .6
Using the Rear A/ V Input Jacks . . . 7
Using the Multimedia
Remote Control . . . . . . . . . . . . 8 ~ 11
Programming the Remote . . . . . . 9
VCR / Cable Box Codes /
DVD Codes . . . . . . . . . . . . . . . . . 10
Keys Functions Chart . . . . . . . . . 11
TV Adjustment and Setup
How to Operate the
On-Screen Menu . . . . . . . . . . . . . 12
Audio Mode . . . . . . . . . . . . . . . . 12
Adjusting Picture/Sound . . . . . . . 12
Adding or Deleting a Channel . . . 13
Adjusting Aspect Ratio . . . . . . . 13
Closed-Captioning . . . . . . . . . . . . . 13
V-Guide Operation
(Parental Control) . . . . . . . . . 14 ~ 15
Care and Cleaning . . . . . . . . . . . . . 15
Helpful Hints (problems/solutions) 16
Warranty (Mexico) . . . . . . . . . . . . . 17
Warranty (U.S.A. and Canada) . . . . 18
Child Safety Matters . . . . . Back Cover
ESPAÑOL . . . . . . . . . . . 19
~
36
Contenido . . . . . . . . . . . . . . . . . . 19
FRANÇAIS . . . . . . . . . . 37
~
51
Table des matières . . . . . . . . . . . 37
Contents
AS
Positioning the appliance
1. Do not place your appliance on an unstable cart, stand, shelf or table.
Serious injury to an individual, and damage to the appliance, may result
if it should fall. Your salesperson can recommend approved carts and
stands or shelf and wall mounting instructions. An appli-
ance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
2. Slots and openings in the cabinet and in the back or bottom are
provided for ventilation. To ensure reliable operation of the appliance
and to protect it from overheating, these openings must not be blocked
or covered. The openings should never be covered with a cloth or other
material, and the bottom openings should not be blocked by placing the
unit on a bed, sofa, rug, or other similar surface. This appliance should
never be placed near or over a radiator or heat register. This appliance
should not be placed in a built-in installation such as a bookcase unless
proper ventilation is provided.
3. Do not expose the appliance to rain or use near water . . . for example,
near a bathtub, swimming pool, kitchen sink, in a wet basement, etc.
Hooking Up Outdoor Antenna
LIGHTNING PROTECTION FOR YOUR ANTENNA AND SET AS PER NATIONAL
ELECTRICAL CODE INSTRUCTIONS.
4. If an outside antenna is connected to the receiver, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built up static charges. Article 810 of the National Electri-
cal Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead
in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
An outside antenna system should not be located in the vicinity of over-
head power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna
system extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
Plug in the power cord
5. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. This product is equipped with a polarized alternating current
line plug (a plug having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of this polarized plug.
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
6. Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Cleaning
7. Before cleaning, unplug the unit from the wall outlet. Do not apply liquid
cleaners or aerosol cleaners directly to the unit. Use a dry cloth for cleaning.
Service & Repair
8. Unplug the appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. If the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the appliance.
C. If the appliance has been exposed to rain or water.
D. If the appliance has been dropped or the cabinet has been
damaged.
E. If the appliance exhibits a distinct change in performance.
F. If the appliance does not operate normally by following the operat-
ing instructions, adjust only those controls that are covered in the
operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the appliance to normal operation.
9. Upon completion of any service or repair, request the service techni-
cian’s assurance that only Factory Authorized Replacement Parts that
have the same characteristics as the original parts were used, and
that routine safety checks have been performed to determine that the
appliance is in safe operating condition. Unauthorized substitutions may
result in fire, electrical shock, or other hazards.
10. Never add accessories that have not been specifically designed for use
with this appliance as they may cause hazards.
11. For added protection during a lightning storm, or when the set is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna. This will prevent damage to the set
due to lightning or power line surges.
12. Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNE
L.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANY-
ING THIS UNIT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE ADHERE TO ALL WARNINGS ON THE PRODUCT AND IN THE OPERATING INSTRUCTIONS. BEFORE
OPERATING THE PRODUCT, PLEASE READ ALL OF THE SAFETY AND OPERATING INSTRUCTIONS. RETAIN THIS
LITERATURE FOR REFERENCE. Follow all instructions...
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL
“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry
as practical.”
NEC
- NATIONAL ELECTRICAL COD
E
ANTENNA
LEAD IN
WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-2
0)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
P
OWER SERVICE GROUNDING
E
LECTRODE SYSTEM
(
NEC ART 250, PART H)
2
Important Safety Information
ELECTRICAL CODE, ANSI/NFPA 70
Trilingual On-Screen Menu
Automatic Channel Search
Auto Shut Off
Closed-Captioning/Quikcap
Aspect Ratio settings
Digital picture controls with
on-screen display
MTS stereo/SAP Decoder
Auto Flesh Tone
Factory preset adjustments for
picture/sound
Front Surround Sound
Tone
V-Guide (Parental Control)
Game Mode
Component Video Input
480i (Y-Pb-Pr)
Audio/Video Input Jacks
(2 sets—Front (AV1) / Back (AV2)
S-Video Input Jack
Sleep Timer (3 hours)
TV Reset
181 Channel Tuning System
VHF Channels 2-13
UHF Channels 14-69
Cable TV (CATV) 1, 14-125
Automatic Fine Tuning
VHF and Cable Channels
Multimedia Remote Control
VCR/TV/AUX
Large Glow-in-the-Dark
basic operating keys
0~9 Numbered Channel Selection
Channel Scanning
Volume Mute
Power Recall
Display Sleep
Caption Reset
Menu V-Guide
Input VCR/DVD keys
PICTURE TUBE SIZE
(Measured Diagonally) . . . . . . . . . . . . . . . . . . . . . . . . 24-inches
PICTURE RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . 260 Lines
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Lines
ANTENNA INPUT . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75
POWER REQUIREMENT . . . . . . . . . . . . . . . . . . . . 120VAC 60Hz
POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 watts
HORIZONTAL DIM. (Width) . . . . . . . . . . . . . . . . . 26.6 in. (677mm)
VERTICAL DIM. (Height) . . . . . . . . . . . . . . . . . 20.6 in. (524mm)
DEPTH DIM. (Thickness) . . . . . . . . . . . . . . . . . 18.9 in. (480mm)
WEIGHT (Approx.) . . . . . . . . . . . . . . . . . . . . . 60.1 lbs. (27.3 Kg.)
SOUND (2 Speakers) . . . . . . . . . . . . . . . . . . . . . . . Size: 5x9 cm
AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in with 1W/ch
AUDIO/VIDEO INPUT JACKS . . . . . . . . . . . . . . . . . . . . . Video Input
. . . . . . . . . . . . . . . . . . . Audio Input (2 sets, R/L – Front/Back)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-Video Input
480i COMPONENT VIDEO
INPUT JACKS . . . . . . . . . . . . . . Component Video Input (Y-Pb-Pr)
CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user’s
authority to operate the unit.
Specifications
Welcome to the World of Sanyo
Thank you for purchasing a Sanyo Color Television. You made an excellent choice for Performance, Styling,
Reliability, and Va lue. The TV is designed with easy to use on-screen set-up instructions and operating features.
Need assistance? Visit our Web site at www.sanyoctv.com or call toll free 1-800-877-5032.
Features
Features / Specifications
3
Basic Set-up and Connections
CATV FRANCHISE NOTE:
Cable companies, like public
utilities, are franchised by
local government authorities.
To receive cable programs,
even with equipment which
is capable of receiving cable
channels, the consumer
must subscribe to the cable
company’s service.
QuickTips
The TV will auto-
matically select the
correct Antenna
mode for the type
of RF signal you
connect.
TV will switch off
automatically after
15 minutes if there is
no signal reception
(cable out or station
not broadcasting).
Exception—When
the Video mode is
selected, the TV will
not automatically
switch off when
signal reception
has stopped for 15
minutes.
If you move the TV
to a new location,
press the RESET key
twice after connect-
ing the signal and
turning on the TV.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
(MONO)
S-VIDEO
COMPONENT
2
IN
FROM ANT.
OUT
OUT TO TV
CATV IN
OUT TO TV
S-VIDEO
CH3
CH4
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
IN FROM
SAT.
IN OUT
Connecting Cable Service, RF Antenna, or Satellite dish receiver to TV
Cable Service
RF Antenna
Satellite Receiver
TV Back
Initial Set-up
1.
Install batteries in remote control, see page 8.
2.
Connect signal, see below.
3.
Plug in AC power cord.
4.
Press POWER key to turn on TV.
5. Follow on-screen instructions.
VCR Back
Note: If you do not have a
VCR connect signal
directly to TV 75 ohm
jack.
Operational Tip for No Signal Connection:
If the TV is used as a monitor only, with a DVD player or some other type of external equip-
ment, and no cable or antenna signal is available, the following setup is necessary:
Your TV is designed to automatically search for available channels. Therefore, the initial
start up requires that you press the MENU key, enabling the TV to automatically go through
the channel search process before you can operate the TV. After the initial channel search is
completed, you must press the MENU key again to complete the channel search process (may
take several minutes).
After the channel search process is complete (2 searches), you can press the INPUT key on
the remote control to use the TV as a monitor.
4
Basic Set-up and Connections
Positioning the TV
Do not position the TV in a confined
area. Allow space for normal air
circulation around electronic parts.
Front and Rear Panel
Audio/Video Input Jacks (AV1)
Connect video equipment here (see page 6).
Front
Front/Rear Control
5
VIDEO IN L- AUDIO -R
MENU CH VOL
Audio/Video Input Jacks (AV2)
Connect video equipment here (see page 7).
Notes: S-Video connection will override an
AV2 video connection.
S-Video Input Terminal
To enhance video detail use the AV1
S-Video jack instead of the AV1 Video jack,
if available on your external equipment. (An
S-Video connection will override connection
to the AV1 video input jack. See page 7.)
480i Component Video Input Jacks
(Component 2—Y-Pb-Pr)
Connect digital video equipment here (see page 6).
Notes: Audio/Video Input (AV2) and Component inputs
share the same audio (R/L) input jacks.
Rear
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
(MONO)
S-VIDEO
COMPONENT
2
Connecting a DVD Player or other equipment
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect a DVD Player or other digital equipment’s interlaced Component Video Output to
the TV Component Video Input (Y-Pb-Pr) Jacks.
Connect the DVD Players Audio Output to the TV A/V2 Audio Input (L/R) Jacks.
Press POWER to turn on the TV. Turn on external equipment also.
To access Audio/Video inputs, press the INPUT key to select COMPONENT2.
Notes: DVD Player component output must be set to Interlaced (480i).
Audio/Video Input (AV2) and Component inputs share the same audio (R/L)
input jacks.
Connect equipment to the component inputs or A/V2 inputs, but not both sets at
the same time.
Using the Component Video and Audio Input Jacks
QuickTips
You may be able
to use the TV
remote control
to operate your
DVD Player. (See
pages 9 ~11).
A solid Blue screen
with COMPONENT2
displayed means
that the Compo-
nent Video mode
is selected, but
no signal is being
detected at the Com-
ponent jacks. Check
connection, and
turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Y
P
B
/C
B
/C
R
P
R
COMPONENT VIDEO OUT
AUDIO OUT
RL
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
COMPONENT
2
S-VIDEO
DVD Player
TV Back
What you will need for connections:
Component video cable – 1
Audio Cable – 1
RESETINPUT
POWER
VCR TV AUX
Remote Control
Press INPUT key after
connecting cables to access the A/V
inputs.
There is NO need to tune to a blank
channel.
Connecting a Video Game or other equipment
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
Connect game Audio Output (R/L) to the TV Audio Input (R/L).
Then connect game Video Output to the TV Video Input.
Press POWER to turn on the TV. Turn on external equipment
also.
To access Audio/Video inputs, press the INPUT key to select
GAME or select using the menu.
Using the Front Video and Audio Input Jacks
6
Component / Front A/V Input Jacks
What you will need for connections:
Audio / Video cable – 1
VIDEO IN L- AUDIO -R
MENU CH VOL POWER
VIDEO IN L- AUDIO -R
Video Game
Camecorder
Connect a VCR or other equipment
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect VCR, DVD Player, or other equipment’s Audio Video Output to the TV Audio Video
Input.
For Mono VCR (Single Audio Jack) connect VCR Audio Output to TV Audio (L) Input.
Optional
Connect DVD Player or other equipment’s S-Video Output to the TV S-Video Input Jack.
Using the S-Video jack overrides the Video jack.
Press POWER to turn on the TV. Turn on external equipment also.
Press the INPUT key to select VIDEO2.
Notes: Audio/Video Input (AV2) and Component inputs share the same audio (R/L) input
jacks.
Connect equipment to the component inputs or A/V2 inputs, but not both sets at
the same time.
Using the Rear Audio/Video Input Jack
Y
P
B
/CB /CR
PR
COMPONENT VIDEO OUT
AUDIO OUT
RL
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
COMPONENT
2
34
R-AUDIO-L
R-AUDIO-L VIDEO
VIDEO
VHF/UHF
TO TV
FROM ANT.
RF
CHANNEL
IN
OUT
IN
OUT
S-VIDEO
Back View of VCR
Remote Control
TV AV Input
Jacks
DVD Player
What you will need for connections:
AV Cable – 1
OPTIONAL CONNECTION
S-Video Cable – 1
Audio Cable – 1
Press INPUT key
after connecting cables
to access the A/V inputs.
There is NO need to tune
to a blank channel.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match A/V
cables according to
the colors;
RED for
right audio,
WHITE for
left audio and
YELLOW
for video.
A solid Blue screen
with VIDEO2,
displayed means
that a Video mode
is selected, but
no signal is being
detected at the
Video jacks. Check
connections, and
turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Rear A/V In Jacks
7
RESETINPUT
POWER
VCR TV AUX
Using the Multimedia Remote Control
Remote Control Keys
Mode Keys—Use these keys to program the remote control and to select the operat-
ing mode (VCR, TV, or AUX).
To Operate Your...VCR—Press the VCR key. Cable Box or DVD Player—Press the
AUX
key. Television—Press the TV key.
Note: Be sure to hold
down the mode key while entering a code number,
see page 9.
Input Key—Press to select the program source: TV signal or signal from the DVD
Player or other equipment you have connected to the A/V jacks.
Number Keys—Two keys must be pressed to select a channel. Example: Press 0 then 6
to select channel 6. For cable channels 100 through 125
, press and hold the 1 key until
C1–– appears. Then press the other two numbers.
Caption Key—See page 13.
Menu Key—Use this key with the / and – /+ keys to navigate and adjust features of the
on-screen menu system (see pages 12 ~ 13).
Channel Scanning (CH / ) and Volume (VOL – /+) Keys—Press to scan through the
channels in memory and to adjust the volume.
Mute Key—Press once to minimize the volume. Press again to restore.
VCR/DVD Keys—These keys control VCR or DVD functions for Fast Forward
(
✉✌ Rewind ( ), Play (4 ), Record (REC
), Stop (), and Pause (II).
V-Guide Key—See pages 14 ~ 15.
Operates your TV, VCR, DVD, and Cable converter box. To program the remote control,
see pages 9 ~ 11.
Install Battieres as shown (2 AA, not included)
Notes:
Do not mix old batteries with new ones or mix
different types of batteries together.
Remove the batteries if the remote control will not be
used for a month or more. Weak batteries may leak
and cause damage. (Normal battery life is roughly
six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed of properly
in compliance with all applicable laws. For detailed information, contact your local County
Solid Waste Authority.
QuickTips
Be sure batteries
are installed
correctly.
Point the remote
control toward the
equipment you
want to operate.
Objects between the
remote control and
the equipment may
cause misoperation
of the remote
control function.
If the remote
control does not
work: Press TV key
(see item 1).
The remote
control must be
programmed before
it will operate your
VCR, DVD Player,
or Cable Box. See
pages 9~11.
Cannot select
channel with number
keys. Press “ 0” in
front of numbers
1 ~ 9. Example: C 05.
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and Left flashing
arrow indicates
volume is
decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
8
Remote Control
Reset Key—Press this key twice to restore factory set-
tings. The TV will automatically start Channel Search
and clear all customized settings. These features will
automatically reset:
Picture/Sound Adjustments: Color, Tint, Contrast,
Brightness, Sharpness, Tone, and Surround Sound
Channel Memory
Audio to Stereo
Caption to OFF
V-Guide to OFF
Aspect Ratio to 4:3 (normal)
Menu Language to English
Sleep Timer (if previously set)
Game/Video to TV (if previously set)
If desired, personal settings can be made again using
the menu options.
Power Key—Press to turn TV on or off.
Sleep Key—Press this key, then press the “0” key to
set the Sleep Timer. The desired time can be set from
30 minutes up to 3 hours in 30 minutes increments.
Sleep Timer will switch off the TV automatically.
Note: The Sleep Timer cancels when the TV is turned
off or if a power failure occurs.
Recall Key—Select a channel then select another
channel using the number keys. Press Recall to switch
between the channels.
Display Key—Press once to display the channel
number. Press twice to display the channel number
continuously. Press again to remove the display.
12
14
Programming the Remote Control
Find your VCR, Cable Box, and DVD Player brand
codes in the charts on page 10.
Press and hold the VCR or AUX (Auxiliary) mode key
while entering a three-digit code number. Then release
the mode key.
If the code was accepted, the mode key will flash 5 times after
it is released. If you entered an invalid code, the mode key
will not flash. Check the code number and repeat Step 2.
After entering each code number check the unit’s operation
by pressing the Power and/or Channel keys. If these keys
operate your equipment, you have probably entered the
correct code number for that device. If not, follow Step 2
and enter another code, if available.
Perform Steps 1 and 2 for each piece of equipment you
have.
The VCR mode will accept only VCR codes.
The AUX mode will accept code types for DVD Players,
Cable Boxes, or a second VCR, but only one code at a time.
For programmed key functions, see chart on page 11.
After you have programmed the remote control and
confirmed its operation, enter your codes in the spaces
pro-
vided below for easy reference.
VCR Code: Cable Box Code: DVD Player Code:
11
13
Programming the Remote Control
9
RECALL
DISPLAYMUTE
PLAY
PAUSE
V-GUIDE
REC STOP
MENU
CAPTION SLEEP
RESETINPUT
CH
VOL VOL
POWER
VCR TV AUX
123
456
789
0
123
456
789
0
12
13
14
11
Point towards TV
BRAND NAME .CODES
ABC . . . . . . . . . . . 312, 304, 306, 308,309,
. . . . . . . . . . . . . 311, 313, 314, 318, 319,
. . . . . . . . . . . . . 321, 322, 323, 324,
. . . . . . . . . . . . . 327, 329
AIM . . . . . . . . . . . 321
Archer . . . . . . . . . 334
Bell & Howell . . . 313, 314, 329
Contec . . . . . . . . . 305, 302, 307, 308,309,
. . . . . . . . . . . . . 311, 318, 319, 320,
. . . . . . . . . . . . . 322, 323, 324, 327
CPI . . . . . . . . . . . 319, 308, 309, 311,
. . . . . . . . . . . . . 322, 323
Diamond . . . . . . . 320
Eagle . . . . . . . . . 313, 314, 329
Emerson . . . . . . . 334
Gemini . . . . . . . . 334
General
Instruments . . . . . 303, 300, 308, 309, 311,
. . . . . . . . . . . . . 319, 320,321, 322, 323
Goldstar . . . . . . . 312
Goodmind . . . . . . 334
BRAND NAME .CODES
Hamlin . . . . . . . . 330, 320
Hitachi . . . . . . . . 309, 308, 311, 319,
. . . . . . . . . . . . . 322, 323
Hytex . . . . . . . . . 318
Jerrold . . . . . . . . 300, 303, 308, 309,
. . . . . . . . . . . . . 311, 313, 314, 319,
. . . . . . . . . . . . . 320, 321, 322, 323, 329
Magnavox . . . . . . 325, 329, 301, 308,
. . . . . . . . . . . . . 309, 311, 313, 314,
. . . . . . . . . . . . . 319, 322, 323
Memorex . . . . . . 331, 332, 313, 314, 329
Motorola . . . . . . . 338, 303, 300, 308,
. . . . . . . . . . . . . 309, 311, 319, 320,
. . . . . . . . . . . . . 321, 322, 323
Movie Time . . . . . 306, 310, 314, 313, 329
Northcoast . . . . . 316
NSC . . . . . . . . . . . 305, 306, 314, 313, 329
Oak . . . . . . . . . . 305, 318, 320
Paragon . . . . . . . 331, 313, 314, 329
Panasonic . . . . . . 331, 324, 302, 307,
. . . . . . . . . . . . . 317, 327
BRAND NAME .CODES
Philips . . . . . . . . 325, 329, 301, 308,
. . . . . . . . . . . . . 309, 311, 313, 314,
. . . . . . . . . . . . . 319, 322, 323
Pioneer . . . . . . . . 312, 327, 335, 333,
. . . . . . . . . . . . . 317, 324
Proscan . . . . . . . . 327
Quasar . . . . . . . . 331, 302, 307, 317
RCA . . . . . . . . . . . 328, 302, 307
Regal . . . . . . . . . 330, 307, 320
Rembrandt . . . . . 305, 309, 308, 311,
. . . . . . . . . . . . . 319, 322, 323
Radio Shack . . . . 334
Samsung . . . . . . . 312, 310
Scientific Atlanta . 335, 327, 307, 324
Signal . . . . . . . . . 310
Signature . . . . . . 300, 309, 308, 311,
. . . . . . . . . . . . . 319, 321, 322, 323
Sprucer . . . . . . . . 302, 307, 316
Starcom . . . . . . . 332, 309, 308, 311,
. . . . . . . . . . . . . 319, 321, 322, 323
BRAND NAME .CODES
Stargate . . . . . . . 309, 310, 311, 321,
. . . . . . . . . . . . . 322, 334
Teleview . . . . . . . 310
Tocom . . . . . . . . . 300, 303, 305, 304,
. . . . . . . . . . . . . 306, 307
Toshiba . . . . . . . . 331, 309, 308, 311,
. . . . . . . . . . . . . 316, 319, 322, 323
Unika . . . . . . . . . 314, 313, 329
United Artists . . . 318
United Cable . . . . 309, 308, 311, 319,
. . . . . . . . . . . . . 322, 323
U.S. Electronics . . 309, 308, 311, 319,
. . . . . . . . . . . . . 322, 323, 324, 327
Viewstar . . . . . . . 326, 313, 315, 314, 329
Wards . . . . . . . . . 321, 322, 308, 309,
. . . . . . . . . . . . . 311, 319, 323
Warner . . . . . . . . 312
Zenith . . . . . . . . . 331, 336, 337, 308, 309,
. . . . . . . . . . . . . 311, 316, 319, 322, 323,
. . . . . . . . . . . . . 324, 327
BRAND NAME .CODES
Admiral . . . . . . . . 234, 239, 243, 247,
. . . . . . . . . . . . . . 224, 229, 222, 215
Adventura . . . . . . 228
Aiko . . . . . . . . . . 240, 205
Aiwa . . . . . . . . . . 228, 217
Akai . . . . . . . . . . 209, 215
America Action . . 205, 240
America High . . . 232
Bell & Howell . . . 203, 201
Broksonic . . . . . . 234, 243, 247, 227, 204
Candle . . . . . . . . 233, 240, 248, 222,
. . . . . . . . . . . . . . 223, 204, 205, 208,
. . . . . . . . . . . . . . 211, 216, 217
Canon . . . . . . . . . 232, 216
CCE . . . . . . . . . . . 240, 205
Cineral . . . . . . . . 240, 205
Citizen . . . . . . . . 233, 240, 222, 205,
. . . . . . . . . . . . . . 211, 216, 217
Craig . . . . . . . . . . 223, 235, 202, 219
Craver . . . . . . . . . 204
Curtis Mathes . . . 232, 236, 238, 248,
. . . . . . . . . . . . . . 222, 228, 208, 209,
. . . . . . . . . . . . . . 211, 216, 217
Daewoo . . . . . . . 205, 240, 211
Daytron . . . . . . . 240, 205
Denon . . . . . . . . . 221, 230
Dynatech . . . . . . 228
Emerex . . . . . . . . 214
Emerson . . . . . . . 228, 243, 234, 236,
. . . . . . . . . . . . . . 240, 247, 223, 227,
. . . . . . . . . . . . . . 201, 203, 204, 205,
. . . . . . . . . . . . . . 206, 210, 211, 217
Fisher . . . . . . . . . 200, 201, 202, 203, 211
Fuji . . . . . . . . . . . 232
Funai . . . . . . . . . 228, 233, 217
GE . . . . . . . . . . . 222, 246, 248, 232,236,
. . . . . . . . . . . . . . 239, 226, 229, 224,
. . . . . . . . . . . . . . 208, 212, 213, 216
BRAND NAME .CODES
Goldstar . . . . . . . 223, 238, 248, 226,
. . . . . . . . . . . . . . 206, 208, 215, 217
Go Video . . . . . . . 248, 249, 208, 212,
. . . . . . . . . . . . . . 213, 219
Gradiente . . . . . . 228
Garrard . . . . . . . . 228
Harley Davidson . 228
Headquarter . . . . 200
Hitachi . . . . . . . . 228, 230, 246, 226,
. . . . . . . . . . . . . . 221, 222, 209, 217
Hughes . . . . . . . . 221, 230
JBL . . . . . . . . . . . 237
Jensen . . . . . . . . 209
JVC . . . . . . . . . . . 220, 225, 238, 226,
. . . . . . . . . . . . . . 201, 203, 209, 221, 230
KEC . . . . . . . . . . . 240, 205
Kenwood . . . . . . . 220, 225, 226, 238,
. . . . . . . . . . . . . . 201, 203, 209
Kodak . . . . . . . . . 232
Lloydʼs . . . . . . . . 228
Logik . . . . . . . . . 235, 219
LXI . . . . . . . . . . . 232, 221, 228, 230,201,
. . . . . . . . . . . . . . 202, 203, 206, 211, 217
Magnasonic . . . . 223, 235, 240, 205, 219
Magnavox . . . . . . 204, 232, 235, 228,211,
. . . . . . . . . . . . . . 216, 217, 219, 220, 225
Marta . . . . . . . . . 206
Matsushita . . . . . 232, 216
MEI . . . . . . . . . . . 232
Memorex . . . . . . 227, 232, 239, 243,245,
. . . . . . . . . . . . . . 223, 224, 228, 229,
. . . . . . . . . . . . . . 230, 221, 200, 201,
. . . . . . . . . . . . . . 202, 203, 206, 215
Minolta . . . . . . . . 221, 230
Mitsubishi . . . . . . 231, 239, 244, 224, 226,
. . . . . . . . . . . . . . 229, 210, 223
Motorola . . . . . . . 232, 239, 229, 224
MTC . . . . . . . . . . 228, 235, 217, 219
BRAND NAME .CODES
Multitech . . . . . . . 228, 217
NEC . . . . . . . . . . . 238, 208, 223, 226,
. . . . . . . . . . . . . . 201, 203, 206, 209,
. . . . . . . . . . . . . . 215, 217, 248
Olympus . . . . . . . 232
Optimus . . . . . . . 239, 245, 248, 223,224,
. . . . . . . . . . . . . . 229, 201, 203, 208
Orion . . . . . . . . . 243, 227, 234, 240,
. . . . . . . . . . . . . . 205, 206, 210, 211
Panasonic . . . . . . 245, 232, 235, 236,223,
. . . . . . . . . . . . . . 202, 211, 216, 219
Penny . . . . . . . . . 230, 232, 235, 248,221,
. . . . . . . . . . . . . . 223, 208, 211, 216, 219
Pentax . . . . . . . . 238, 221, 230
Philco . . . . . . . . . 204, 232, 243, 228,
. . . . . . . . . . . . . . 216, 217
Philips . . . . . . . . 204, 232, 228, 211,
. . . . . . . . . . . . . . 216, 217
Pioneer . . . . . . . . 242, 204, 207, 220, 225
Proscan . . . . . . . . 222, 241, 246, 230,
. . . . . . . . . . . . . . 236, 221, 226
Proton . . . . . . . . . 219, 235,
Pulsar . . . . . . . . . 233, 240, 248, 205,
. . . . . . . . . . . . . . 208, 216, 217
Quarter . . . . . . . . 200
Quartz . . . . . . . . 200
Quasar . . . . . . . . 245, 232, 236, 223, 216
Radio Shack . . . . 228, 245, 223
RCA . . . . . . . . . . . 222, 241, 246, 248,230,
. . . . . . . . . . . . . . 232, 236, 239, 224,226,
. . . . . . . . . . . . . . 229, 221, 201, 203,
. . . . . . . . . . . . . . 207, 208, 210, 216
Realistic . . . . . . . 232, 239, 240, 248,
. . . . . . . . . . . . . . 223, 224, 228, 229,
. . . . . . . . . . . . . . 200, 201, 202, 203,
. . . . . . . . . . . . . . 206, 208, 216, 217
Samsung . . . . . . . 248, 208, 233, 211,
. . . . . . . . . . . . . . 217, 222
Samtron . . . . . . . 208, 248
BRAND NAME .CODES
Sansui . . . . . . . . 243, 226, 228, 235,
. . . . . . . . . . . . . . 209, 219, 220, 225
Sanky . . . . . . . . . 239, 229, 224
Sanyo . . . . . . . . . 200, 201, 202, 203
Scott . . . . . . . . . . 234, 247, 223, 227, 211
Sears . . . . . . . . . 232, 223, 228, 230, 221,
. . . . . . . . . . . . . . 200, 201, 202, 203, 206,
. . . . . . . . . . . . . . 211, 216, 217
Semp . . . . . . . . . 211
Shintom . . . . . . . 219, 227, 235
Sharp . . . . . . . . . 239, 229, 224
Signature . . . . . . 228, 217, 239, 229,
. . . . . . . . . . . . . . 224, 200
Sony . . . . . . . . . . 214, 218, 232, 237,
. . . . . . . . . . . . . . 226, 228
STS . . . . . . . . . . . 221, 230
Sylvania . . . . . . . 228, 232, 244, 204,
. . . . . . . . . . . . . . 216, 217
Symphonic . . . . . 228, 217, 233, 226, 202
Yamaha . . . . . . . 238, 226
Tatung . . . . . . . . 226, 209
Teac . . . . . . . . . . 228, 209, 214, 217
Technics . . . . . . . 232
Teknika . . . . . . . . 232, 223, 228, 216, 217
Toshiba . . . . . . . . 211, 240, 244, 202,
. . . . . . . . . . . . . . 205, 210
Tomas . . . . . . . . . 228, 217
Vector . . . . . . . . . 211
Video Concept . . . 211
Wards . . . . . . . . . 230, 232, 239, 248,
. . . . . . . . . . . . . 223, 224, 228, 229,
. . . . . . . . . . . . . . 221, 202, 204, 208,
. . . . . . . . . . . . . 211, 217
White
Westinghouse . . . 240, 243, 205
XR-1000 . . . . . . . 228, 232
Zenith . . . . . . . . . 206, 215, 237, 243,220,
. . . . . . . . . . . . . . 223, 225, 228, 222
VCR CODES
BRAND NAME .CODES
Akai . . . . . . . . . 529
Apex . . . . . . . . . 525, 527,
. . . . . . . . . . . . . 528, 523
Daewoo . . . . . . 529
Denon . . . . . . . . 501, 520
Emerson . . . . . . 521, 524, 527
Fisher . . . . . . . . 500
BRAND NAME .CODES
GE . . . . . . . . . . 504
Harman/Kardon 513
Hitachi . . . . . . . 530
JVC . . . . . . . . . . 515, 510
Kenwood . . . . . . 507
Koss . . . . . . . . . 522
Magnavox . . . . . 508, 502
Marantz . . . . . . 508
BRAND NAME .CODES
Mitsubishi . . . . . 503
Onkyo . . . . . . . . 516, 502
Optimus . . . . . . 511
Orion . . . . . . . . 526
Oritron . . . . . . . 522
Panasonic . . . . . 501, 518
Philips . . . . . . . 508, 502
BRAND NAME .CODES
Pioneer . . . . . . . 511, 505, 518
Proscan . . . . . . . 504
RCA . . . . . . . . . . 504
Samsung . . . . . . 512
Sanyo . . . . . . . . 500, 526
Sharp . . . . . . . . 531, 517
Sherwood . . . . . 519
BRAND NAME .CODES
Sony . . . . . . . . . 506
Sylvania . . . . . . 524
Symphonic . . . . 524
Technics . . . . . . 501
Theta Digital . . . 511
Toshiba . . . . . . . 502, 526
Yamaha . . . . . . 501, 50
9
Zenith . . . . . . . . 521, 514, 502
DVD CODES
CABLE BOX CODES
10
VCR / Cable / DVD Remote Codes
Multimedia Remote Control Keys Functions Chart
Notes:
Many of the keys on this remote control are multi-
functional. Please refer to the chart for a generic descrip-
tion of the keys and their functions. Refer to your original
operating manuals for specific feature operation.
This remote control cannot add keys or features to your
equipment. Your equipment’s manufacturer must have
originally provided them.
The CHANNEL (/) and VOLUME (/+) keys become
CURSOR keys when the MENU key is pressed. This oper-
ating state remains active for 10 seconds after pressing the
MENU key or either of the CHANNEL or VOLUME keys.
After 10 seconds, these keys will revert to normal channel
and volume operation.
Some equipment brands use the CHANNEL and
VOLUME keys instead of CURSOR keys to navigate
through their menu system. If, after pressing the MENU
key, the CHANNEL and VOLUME keys do not move the
cursor, wait 10 seconds then try them again. If the menu
leaves the screen, press the MENU key again then wait 10
seconds before pressing the CHANNEL and VOLUME
keys.
Operations in the chart that are marked with an asterisk (*)
work when the menu is displayed (after pressing the MENU
key).
The AUX mode can be programmed to operate a, DVD
Player, Cable Box, or second VCR, but only one device
at a time.
REMOTE KEYS TV MODE VCR MODE CABLE BOX MODE DVD MODE
POWER Turns unit On/Off Turns unit On/Off Turns unit On/Off Turns unit On/Off
NUMBER KEYS (0 ~ 9) Used to Select Channels Used to Select Channels Used to Select Channels No Function
INPUT Selects TV/Video Selects TV/VCR No Function No Function
RECALL Selects previous channel Selects previous channel Selects previous channel Select Repeat function
MENU Displays Setup Menu Displays Setup Menu Displays Setup Menu Displays Setup Menu
CHANNEL
(UP) Channel/Cursor* Up Channel/Cursor* Up Channel/Cursor* Up Next/Cursor* Up
CHANNEL (DOWN) Channel/Cursor* Down Channel/Cursor* Down Channel/Cursor* Down Previous/Cursor* Down
VOLUME (DOWN) Audio Down/Cursor* Left Audio Down/Cursor* Left Audio Down/Cursor* Left Audio Down/Cursor* Left
VOLUME + (UP) Audio Up/Cursor* Right Audio Up/Cursor* Right Audio Up/Cursor* Right Audio Up/Cursor* Right
MUTE Switches TV sound Off/On Switches TV sound Off/On Switches TV sound Off/On Switches TV sound Off/On
DISPLAY Shows/Clears display No Function No Function Zoom Function
RESET Operates TV ONLY No Function No Function No Function
CAPTION Operates TV ONLY No Function No Function Accesses Audio Options
SLEEP Operates TV ONLY No Function No Function No Function
V-GUIDE Operates TV ONLY No Function No Function No Function
PLAY ( ) Selects VCR/DVD Play Selects VCR Play Selects VCR/DVD Play Selects DVD Play
FAST FORWARD (44) Operates VCR/DVD Operates VCR Operates VCR/DVD Operates DVD
REWIND (33) Operates VCR/DVD Operates VCR Operates VCR/DVD Operates DVD
STOP ( ) Selects VCR/DVD Stop Selects VCR Stop Selects VCR/DVD Stop Selects DVD Stop
PAUSE (ll) Selects VCR/DVD Pause Selects VCR Pause Selects VCR/DVD Pause Selects DVD Pause
RECORD (REC
) No Function Selects VCR Record No Function No Function
MODE KEYS Press these keys (VCR/TV/AUX) when programming the remote control and to choose an operating mode.
Remote Control Keys’ Functions
11
The on-screen menu provides the viewer with easy access to adjustments and settings. Just use
the keys on the remote control and follow the on-screen instructions.
How to Operate the On-Screen Menu
1. Press MENU key.
2. Use the /keys to highlight the
desired feature.
3. Use the /+ keys to choose desired
option. (
indicates selected item.)
4. Press the
MENU key to exit.
Items with submenus require additional steps.
Setting Audio mode
Select desired sound setting, Stereo, Mono, or SAP (secondary audio program).
Note: Stereo and SAP must be part
of the broadcast signal.
1. Choose Stereo, Mono, or SAP from the Audio options.
Note: The TV will automatically reset to stereo if unplugged or a power failure occurs.
Adjusting Picture/Sound
For automatic picture/sound adjustment
Choose Auto from the Picture/Sound options.
Adjust the picture/sound manually
1. Choose Manual from the Picture/Sound options.
2. Press the
MENU key to open the
picture/sound settings submenu.
3. Use the /keys to highlight the picture
or sound setting you want to change.
4. Use the /+ keys to adjust settings.
For automatic game settings
1. Choose Game from the Picture/Sound options.
The screen and sound will automatically change
to factory preset settings.
2. Press the
MENU key to exit.
Note: Select the front A/V input jacks by pressing the INPUT key on the remote control.
▲▼ keys – + keys
Audio
Stereo
Stereo Mono SAP
▲▼ keys – + keys
Audio
Stereo Mono SAP
Picture/Sound
Auto
Game Manual
Antenna
Cable VHF/UHF
CH. Search
NO Start
CH. Scan Memory C 34 Added
Aspect Ratio
4:3 16:9
Espanol
Menu Language
English Francais
Press MENU key to exit
TV Adjustment and Setup
QuickTips
The menu will
display on the
screen for approxi-
mately 20 seconds.
Press MENU again
to redisplay.
Use the CHANNEL
/ keys and the
VOLUME /+ keys
to navigate through
the menus and to
make selections
from the menus.
Under weak stereo
signal conditions,
you may receive
better quality sound
in the “Mono”
position.
Use the Surround
feature to expand the
sound effect while
receiving MTS stereo
signals as well as
enhancing video
games sounds.
When setting the
Antenna mode,
choose Cable if your
TV is connected
to a cable system,
otherwise choose
VHF/UHF.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Color Enhancer
Color Enhancer Normal
Warm
Warm
▲▼ keys + keys
Color
Tint
Contrast
Brightness
Sharpness
Press MENU key to exit
Tone
Tone
L
L ––––
IIIIIIH
IIIIIIH
Surround
Surround OFF
ON
ON
▲▼ keys + keys
Audio
Picture
Picture
/
/
Sound
Sound
Auto
Manual
Manual
Game
12
On-Screen Menu Adjustment / Setup
Resetting the Antenna/Cable Mode and Channel Search
Resetting the Antenna/Cable Mode or CH. (Channel)
Search is required only if additional channels become
available, such as moving to another city or having a
cable service installed.
1. Choose Start from the Ch. Search menu options.
CH. Scan Memory
Aspect Ratio
Menu Language
Press MENU key to exit
CH. Search
CH. Search NO
Start
Start
Adding or Deleting Channels
1. Press MENU key.
2. Use the /keys to highlight CH. Scan Memory.
3. Press the
+ key to highlight channel number entry area.
4. Enter the channel number you want to add or delete (example): C34. For cable channels
above 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.
Aspect Ratio
Use this feature when digital equipment is connected to the component input jacks. The
4:3 setting is for normal viewing. The 16:9 setting changes the picture image to wide-screen
viewing with minimal portion of top and bottom compressed.
1. Press MENU key.
2. Use the / keys to highlight Aspect Ratio.
3. Press the /+ keys to select 4:3 or 16:9.
Menu Language
Press MENU key to exit
Aspect Ratio
Aspect Ratio
4:3
4:3
16:9
Aspect Ratio
Menu Language
Select channel using
Select channel using
▲▼
▲▼
,
,
0~9 keys
0~9 keys
Press MENU key to exit
Press MENU key to exit
CH. Scan Memory
C 34
C 34 Deleted
5. Press the + key to change the present setting.
Example: Added will change to Deleted. This
takes about three seconds. During that time, the
word “Added” or “Deleted” will become yellow.
6. Use the 0~9 or ▲▼ keys to choose other channels
to delete or add, or press the MENU key to exit.
Add / Delete Channel, Aspect Ratio, Closed-Captioning
13
CAPTION1: This is the main mode used for program captioning (words match the program
you are watching). These captions are generally one or two lines.
CAPTION2: An alternative mode for program captioning. Caption2 may be used by the
broadcaster to provide captions in another language, such as, Spanish or French.
TWO OUTS AND TWO STRIKES
Caption1/ 2
Captioning is text information transmitted along with the picture and sound so it can be dis-
played on the TV screen. Because different types of captions can be transmitted with the TV
signal, separate captioning modes are provided. The captioning modes recognized by this
model are: Caption1 and Caption2. Local broadcasters decide which caption signals to transmit.
QuickTips
Channels deleted
from scan memory
can be selected
with the number
keys.
Restoring deleted
channels, use the
on-screen menu to
manually add chan-
nels or start CH.
(Channel) Search
from the menu.
It may take a few
minutes to search
thru the available
channels.
OR
Press the RESET
key twice.
Channel number
will not display
continuously when
captioning is on.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Closed-Captioning
QUIKCAP: Allows captions to toggle on and off with the Mute function. Press the MUTE key on the remote control to
block the TV sound; the captions display automatically. Press the MUTE key again to restore the sound, the captions will
disappear. Quikcap displays program captions in the Caption1 mode.
Setting Captions
1. Press the CAPTION key on the remote control.
2. Press the 0 key to select options: OFF, CAPTION1, CAPTION2, or QUIKCAP.
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF
AMERICA’S FCC V-CHIP REGULATIONS. THEREFORE, IT MAY NOT FUNCTION
WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES.
This Sanyo television is equipped with an electronic V-Chip to interpret MPAA and TV Parental
Guidelines rating codes. When these codes are detected, the TV will automatically display or block
the program, depending upon choices you make when setting up the V-Guide system.
The V-Guide system contain both age-based and content-based settings. This gives parents
discretionary ways of choosing appropriate material for their children to view.
Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language),
S (Sexual Situations), V (Violence), and FV (Fantasy Violence). When programming contains
any or all of these conditions, these letters become part of the icon that is displayed on the TV
screen.
A rating icon will generally appear in the upper left hand corner of the TV screen for
about fifteen seconds.
V-Guide (Parental Control) Information
Use this feature to supervise television viewing for young children. This television can be set to
automatically block programs with content you deem as inappropriate for your children to view.
The ability of the television to block the reception of specific programming content depends
upon several conditions: 1) The program must be rated, 2) Networks must broadcast the rating
code data, 3) Cable companies must transmit the rating code signal, and 4) The TV must be
properly setup to decode the signal.
V-Guide Operation
Setting MPAA Movie Rating
1. Press the V-GUIDE key on the remote
control to display menu.
2. Press the + key to switch V-Guide ON.
3. Press the + key again. Then use the
/ keys to highlight rating.
4. Press the MENU key to Block (B)
or Unblock (U) selected rating.
(Arrow indicates selection.)
5. Press the key to return to the
V-Guide Options menu.
QuickTips
When in the
V-Guide menu
system, the /+
keys allow you to
navigate between
the ratings and the
options menu.
The TV will auto-
matically block (B)
ratings above or
unblock (U) ratings
below selection.
For example, if
you block rating R,
NC17 and X will be
blocked as well.
Blocking TVY7 does
not block higher
ratings.
You can block a
content rating such
as TVPG-V and still
be able to watch
TVPG programs
with ratings of
S-L-D provided
TVPG is
unblocked (U).
To temporarily
unblock or view
Blocked (B) pro-
grams, set
V-GUIDE to OFF,
or press the RESET
key twice to clear
all Blocked (B)
ratings and other
customized
settings.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
V-GUIDE
MPAA Movie Ratings
TV Parental Guidelines
Press MENU key to BLOCK
Use ▲▼, – + keys to select
Press V-GUIDE key to exit
X B
NC17B
R
R
B
B
PG13 U
PG U
G U
14
V-Guide
Setting TV Parental Guidelines
6. Use the / keys to highlight TV Parental
Guidelines.
7. Press the + key. Then use the /
keys to highlight rating.
8. Press the MENU key to Block (B) or Unblock
(U) selected rating. ( Arrow indicates selection.)
Setting Content-Based Guidelines
9. Follow steps 6 and 7. Use the /
keys to highlight Content.
10. Press the MENU key to display the Content Option
menu.
11. Use the / keys to highlight a category
(D-Suggestive Dialog, L-Adult Language, S-Sexual
Situations, V-Violence, FV-Fantasy Violence).
12. Press the + key. Then use the / keys
to highlight a rating.
13. Press the MENU key to Block (B) or Unblock (U)
selected rating. ( Arrow indicates selection.)
14. Press the V-GUIDE key to exit; or press the
key to return to the Content Options menu.
15. Repeat steps 11 through 13 to Block (B) or
Unblock (U) additional content ratings,
if desired.
Turning Off the V-Guide
1. Press the V-GUIDE key.
2. Use the
/+ keys to select OFF.
Note: Networks and local stations may
or may not include the content
ratings portion of the TV Parental
Guidelines.
V-GUIDE
MPAA Movie Ratings
TV Parental Guidelines
TVMA B
TV14 B
TVPG B
TV-G
TV-G
B
B
TVY7 U
TV-Y U
Content
Press MENU key to BLOCK
Use ▲▼, – + keys to select
Press V-GUIDE key to exit
V-GUIDE
MPAA Movie Ratings
TV Parental Guidelines
Press MENU key to set
Use ▲▼, – + keys to select
Press V-GUIDE key to exit
TVMA B
TV14 B
TVPG B
TV-G B
TVY7 U
TV-Y U
Content
Content
D-Suggestive Dialog
L-Adult Language
S-Sexual Situations
V-Violence
FV-Fantasy Violence
TV14 B
TV14 B
TVPG B
Press MENU key to BLOCK
Use ▲▼, – + keys to select
Press V-GUIDE key to exit
Care and Cleaning
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning
agents, solvents, and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note: Never spray liquids on the screen because it can run down and drip onto the chassis. This
may cause component failure not covered under Warranty.
V-Guide / Care & Cleaning
15
Problem Check these Conditions Try these Solutions Page
No.
TV turns off automatically. • Check signal (Cable/Ant.) connection.
• Power surge protection feature.
• Press POWER key.
• The sleep timer may have been set.
• Unplug TV momentarily.
4
No picture, poor picture or wavy
lines in picture.
• Check antenna/external equipment
connections.
• May be station trouble, NO signal
broadcast.
• Brightness or Contrast misadjusted.
• Possible interference from household
appliance.
• Adjust antenna.
• Try a different channel.
• Press RESET key or restart channel
search.
• Turn off Mixer, Drill, Blender, etc.
4, 12
No sound, poor. No sound on
some channels.
• May be station trouble.
• Maybe MUTE function is on.
• Check Audio/ Video connections.
• Try a different channel.
• Adjust volume.
12
No Captioning. • Check if station is broadcasting a Closed-
Caption signal. Select another channel.
• Sselect Caption1 or Caption2. 13
Poor Color or no color. • Check if program is in color.
• Check antenna/external equipment
connections.
• Color or Tint misadjusted.
• May be station trouble.
• Try a different channel.
• Adjust antenna.
• Press RESET key to restart channel
search.
4, 12
Blue Screen with Video1, Video2,
or Component3 displayed.
• Check Audio/ Video connections.
• Check external equipment connections.
• Check external equipment setting.
• Check DVD setting.
• Press INPUT key.
• Switch on external equipment.
• Set DVD component output to interlaced.
6~7, 13
No TV Stereo or SAP Sound. • Check if station is broadcasting a true MTS
stereo signal or a SAP signal.
• Select Stereo or SAP from Audio on-
screen menu.
12
Cannot select or scan some
channels.
• Channel may be removed from memory.
• Check antenna connections.
• V-Guide is set to block programming.
• Select CH. Scan Memory and manually add
channels or start CH. (channel) search.
• Turn V-Guide to OFF or press RESET key
to clear all settings.
14~15
Remote Control will not work
TV or other equipment (VCR,
Cable Box, and DVD).
• Press TV key to operate the TV. Press
VCR to operate VCR. Press AUX to operate
Cable Box and DVD.
• Check batteries; see if TV is plugged in.
• Check external equipment.
• Replace batteries.
Aim remote control at front of TV and
external equipment.
8, 9~11
Menu words seem misspelled. • Maybe a different language is selected. • Reselect menu language choice using the
on-screen menu.
12
Cabinet makes popping sound. • This is a normal condition during warm-
up and cool down of the plastic cabinet
parts.
Helpful Hints (Problems / Solutions)
Before calling for assistance, please check the condition that most closely resembles your problem in the following
chart, then try the solutions for that condition. Visit our Web site at
www.sanyoctv.com or call toll free
1-800-877-5032.
16
Helpful Hints (Problems / Solutions)
Mexico Guarantee
IMPORTADOR:
COMERCIALIZADORA MEXICO
AMERICANA, S.DE R.L. DE C.V.
AV. NEXTENGO N
o
78
COL. SANTA CRUZ ACAYUCAN
DEL. AZCAPOTZALCO, MÉXICO, D.F. C.P. 02770
RFC: CMA9109119L0
GUARANTEE
THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING DEFECTS AND A ONE YEAR SERVICE
WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:
COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.
UNDER THE FOLLOWING CONDITIONS:
1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUT BY THE STORE OR SUPPLIER UNIT OR THIS SALES
INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS INDICATED ON THIS GUARANTEE.
2. IF THE FAULT IS ATTRIBUTED TO A MANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR YOUR MONEY REFUNDED.
DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE WILL BE VALID AT THE STORE WERE THE APPARATUS
WAS PURCHASED, PRESENTING THE ABOVE DOCUMENTS.
3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T REPAIRED,
COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE THE EXCHANGE FOR AN EQUIVALENT
APPARATUS OR THE RETURN OF THE BUYING-SALE COST RESPECTIVELY.
4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF PRODUCT, AND THE RESPECTIVE
COST OF TRANSPORTATION.
THIS GUARANTEE WILL BE NULL AND VOID IN THE FOLLOWING CIRCUMSTANCES:
*
WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.
*
WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS MANUAL.
*
WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE
MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.
CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES,
COMPONENTES, CONSUMIBLES Y ACCESORIOS:
SUCURSAL VALLEJO SUCURSAL MINERVA
Poniente 126 N
o
288 B Silos N
o
135, Col. Minerva
Col. Nueva Vallejo Deleg. Iztapalapa
México, D.F. México, D.F. 09810
Tels. 5567-5378 Tels. 5646-4551
5368-0105, 8589-8033 5646-4550
DESCRIPTION: ________________________________ BRAND: __________________ MODEL:__________________
CLIENT’S NAME: ______________________________________________________________________________________________
ADDRESS: ___________________________________________________________________________________________________
EXTERIOR NUMBER: _______________________________ INTERIOR NUMBER: _______________________________
SUB DIVISION: ____________________________________________ STATE/DELEGATION: _________________________________
TELEPHONE: ______________________________________________
STAMP, DATE AND SIGNATURE
OF
STORE
DESCRIPTION: Television
BRAND: SANYO
MODEL: DS24424
Mexico Guarantee
17
This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc. It is designed and
manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.
United States and Canada Warranty
ONE-YEAR LIMITED WARRANTY
THIS LIMITED WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF
AMERICA, CANADA, AND PUERTO RICO, EXCLUDING THE UNITED STATES’ OTHER TERRITORIES AND PROTECTORATES.
THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR
INDUSTRIAL OR COMMERCIAL PURPOSES.
FOR ONE YEAR from the date of purchase, Sanyo Manufacturing Corporation will replace any defective TV.
To insure proper warranty exchange, keep the original sales receipt for evidence of purchase. Return
the defective TV to the retailer along with the receipt and the included accessories, such as the remote
control. The defective TV will be exchanged for the same model, or a replacement model of equal value,
if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from defects in
material and workmanship under normal use and conditions. Should replacement be necessary under this warranty for any
reason due to manufacturing defect or malfunction during the first year from date of original purchase, Sanyo Manufacturing
Corporation will provide a new TV via exchange at the retailer.
For customer assistance, whether during or out of the warranty period, call toll free
1-800-877-5032.
Weekdays 7:30 AM 7:00 PM Central Time
Saturday 7:30 AM 4:00 PM Central Time
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary from
state to state.
(EFFECTIVE: August 1, 2002)
For your protection in the event of theft or loss of this product, please fill in the information requested below and
KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.______________________________ Date of Purchase _________________________
Serial No.______________________________ Purchase Price___________________________
Where Purchased_________________________
(Located on back of unit)
AS
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
18
US & Canada Warranty
Español Manual de Instrucciónes
Bienvenido al mundo SANYO
Gracías por comprar un Televisor a Color Sanyo. Usted hizo una excelente selección por Funcionamiento,
Estilo, Confiabilidad, y Precio. El TV esta diseñado con instrucciones de fácil ajuste y operación en
pantalla.“Lea este manual antes ensamblar (o usar) este producto.” ¿ Necesita ayuda? Visite nuestro
sitio en internet en www.sanyoctv.com o llame sin costo al 1-800-877-5032.
“Como un Asociado de ENERGY STAR
®
,” Sanyo Manufacturing Corpora-
tion, ha determinado que este producto cumple con los lineamientos
en eficiencia energética de ENERGY STAR
®
.
Importantes Medidas de Seguridad . . . . . . . . . . . . . . 20
Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Ajustes Básicos y Conexiones . . . . . . . . . . . . . . . . . . . 22
Panel Frontal y Posterior . . . . . . . . . . . . . . . . . . . . . . . 23
Utilizando las Entradas de Componente de
Video y Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Conectando una Reproductor de DVD . . . . . . . . . . . 24
Usando las Entradas Frontales de Video y Audio . . . . 24
Conecte una Juego de Video . . . . . . . . . . . . . . . . . . 24
Usando las Entradas de Audio/Video . . . . . . . . . . . . . 25
Conectando una VCR o Reproductor de DVD . . . . . 25
Usando el Control Remoto Multimedia . . . . . . . . . . . . 26
Programando el Control Remoto . . . . . . . . . . . . . . . 27
Códigos de VCR/de Decodificador de Cable /
de Reproductores de DVD . . . . . . . . . . . . . . . . . . . . 28
Teclas de Funciones del Control Remoto . . . . . . . . . . 29
Ajustes del TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ~ 31
Como Operar el Menú en Pantalla . . . . . . . . . . . . . . 30
Ajuste el modo de Audio . . . . . . . . . . . . . . . . . . . . . 30
Ajuste de Imagen/Sonido . . . . . . . . . . . . . . . . . . . . . 30
Agregando o Borrando Canales . . . . . . . . . . . . . . . . 31
Relacion Imagen . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Transmisión Captada . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Informacíon de Guía-V . . . . . . . . . . . . . . . . . . . . . . . . 32
Operación de Guía-V (Control Paternal) . . . . . . . 32 ~ 33
Cuidado y Limpieza . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Sugerencias Útiles—problemas / soluciones . . . . . . . 34
Garantía (México) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Garantía (Estados Unidos y Canadá) . . . . . . . . . . . . . . 36
CONTENIDO
Español Manual de Instrucciónes
19
ENERGY STAR
PRECAUCION
RIESGO DE TOQUE ELECTRICO NO ABRIR!
PRECAUCION : PARA REDUCIR EL RIESGO DE TOQUE ELECTRICO, NO QUITE LA CUBIERTA
(O LA TAPA TRASERA). NO HAY PARTES ADENTRO QUE LAS PUEDA REPARAR EL USUARIO.
REFIERASE A PERSONAL CALIFICADO PARA REPARAR EL APARATO.
ESTE SIMBOLO INDICA QUE VOLTAJES PELIGROSOS QUE CONSTITUYEN
UN RIESGO DE TOQUE ELECTRICO ESTAN PRESENTES DENTRO DE ESTA
UNIDAD.
ESTE SIMBOLO INDICA QUE HAY INSTRUCCIONES IMPORTANTES DE
OPERACION Y MANTENIMIENTO EN LA LITERATURA QUE SE ANEXA A
ESTA UNIDAD.
ADVERTENCIA : PARA REDUCIR EL RIESGO DE FUEGO O TOQUE ELECTRICO, NO EXPONGA ESTE APARATO A LLUVIA O
HUMEDAD.
IMPORTANTES MEDIDAS DE SEGURIDAD
PRECAUCION : POR FAVOR SIGA TODAS LAS ADVERTENCIAS EN EL PRODUCTO Y EN LAS INSTRUCCIONES DE OPERA-
CION. ANTES DE OPERAR EL PRODUCTO, POR FAVOR LEA TODAS LAS INSTRUCCIONES DE OPERACION Y SEGURIDAD.
GUARDE ESTA LITERATURA PARA SU REFERENCIA. Siga todas las instrucciones. . .
Colocando el aparato
1. No coloque su aparato en carrito, pedestal, anaquel o mesa que sean inesta-
bles. Heridas serias a un individuo, y avería al aparato, pueden resultar si
este cae. Su vendedor puede recomendar carritos y pedestales o anaqueles
e instrucciones para montaje en la pared. Una combinación de
aparato y carrito deberá de ser movida con cuidado. Paradas
rápidas, fuerza excesiva, y superficies irregulares pueda
causar que la combinación de aparato y carrito se volteen y
caigan.
2. Las ranuras y aperturas en el gabinete y en la parte trasera e inferior fueron
provistas para ventilación del aparato. Para asegurar una operación confiable
del aparato y protejerlo de sobrecalentamiento, estas aperturas no deberán de
ser tapadas o cubiertas. Las aperturas nunca deberán de ser cubiertas con
un trapo u otro material, y las aperturas de la parte inferior no deberán de ser
tapadas poniendo la unidad en una cama, sofá, alfombra, u otra superficie
similar. Este aparato nunca deberá de ser puesto cerca o sobre radiadores de
calor. Este aparato nunca deberá de ser puesto en instalaciones tales como
libreros a no ser que haya una adequada ventilación en tales instalaciones.
3. No exponga el aparato a lluvia o a uso cerca de agua . . . por ejemplo, cerca
a una bañera, una alberca, un lavabo, en un sótano húmedo, etc.
Conectando la Antena Externa
PROTECCION EN CONTRA DE RAYOS ELECTRICOS PARA SU ANTENA Y APARATO DE
ACUERDO A LAS INSTRUCCIONES DEL CODIGO NACIONAL ELECTRICO (EUA).
4. Si una antena exterior es conectada al receptor, asegúrese que el sistema de
antena esté aterrizado para proveer alguna protección en contra de impulsos
de voltaje y la acumulación de cargas estáticas. El articulo 810 del código
nacional eléctrico de los Estados Unidos de América (National Electrical Code,
ANSI/NFPA 70), provee información con respecto al aterrizamiento correcto
del mástil y la estructura de soporte, el aterrizamiento del alambre a la antena
en una unidad de descarga, el tamaño de los conductores de aterrizamiento,
la localización de la unidad de descarga, conexión a los electrodos de aterriza-
miento, y requerimientos para los electrodos de aterrizamiento.
Una antena exterior no deberá de ser localizada en la vecindad de líneas de poten-
cia que pasen por encima de otros circuitos de luz eléctrica o de potencia, o en
donde pueda caer sobre tales líneas de potencia o circuitos. Cuando se instale un
sistema de antena externa, se debe de tener cuidado extremo en no tocar tales
líneas de potencia o circuitos ya que contacto con ellos puede llegar a ser fatal.
Conectando el cordon de potencia
5. Este producto debe ser operado solamente con el tipo de cordón de potencia
indicado en la etiqueta. Si usted no esta seguro del tipo de alimentación en
su casa, consulte a su distribuidor de este producto, o a la compañía de
suministro eléctrico. Este producto esta equipado con cordón de potencia
polarizado (una de las navajas de la clavija es más ancha, que la otra). Esta
clavija debe de ajustar en el toma corriente de una manera solamente. Esta
característica es una medida de seguridad. Si usted no puede insertar la clavija
totalmente en el toma corriente, trate invirtiendo la clavija.Si la clavija continua
floja en el toma corriente, llame a su electricista, para reemplazar su toma
corriente obsoleto. No deshabilite el propósito de seguridad de esta clavija
polarizada. No sobre cargue los toma corrientes de pared, extensiones
eléctricas, o receptáculos integrales, ya que esta condición puede resultar en
un riesgo de fuego o descarga eléctrica.
6. Los cordones de potencia deben ser direccionados de tal manera que no
puedan ser pisados o dañados con enseres colocados a un lado arriba del
cordón de potencia. ponga una particular atención a los cordones de potencia
y clavijas, receptáculos de toma corrientes, y el punto donde ellos salen del
producto.
Limpieza
7. Antes de limpiar, desconecte la unidad del receptáculo de la pared. No
aplique limpiadores líquidos o en aerosol directamente a la unidad. Utilice
un trapo seco para limpiar.
Servicio y Reparación
8. Desconecte el aparato del receptáculo de pared y refiera servicio a personal
de servicio eléctrico calificado bajo las siguientes condiciones :
A Si el cordón de potencia o el conector están averiados o raídos.
B. Si líquido ha sido derramado en el aparato.
C. Si el aparato ha sido expuesto a lluvia o agua.
D. Si el aparato ha sido tirado o el gabinete a sido averiado.
E. Si el aparato exhibe un cambio perceptible en funcionamiento.
F. Si el aparato no opera normalmente siguiendo las instrucciones de oper-
ación, ajuste solamente aquellos controles que han sido cubiertos en las
instrucciones de operación. Ajuste impropio de otros controles puede
resultar en avería al aparato y posiblemente requiera de trabajo extensivo
por un técnico calificado para restaurar el aparato a su operación normal.
9. Cuando se termine cualquier servicio o reparación, requiera del técnico de ser-
vicio confirmación de que solo Partes Autorizadas de Remplazo de Fabrica que
tengan las mismas características que las partes originales hayan sido usadas,
y que verificaciones de seguridad rutinarias hayan sido llevadas a cabo para
determinar que el aparato se encuentra en condiciones seguras de operación.
Substituciones no autorizadas pueden resultar en fuego, toque eléctrico u
otros peligros.
10. Nunca adicione accesorios que no han sido especificamente diseñados
para uso con este aparato.
11. Para protección adicional durante una tormenta eléctrica, o cuando el
aparato es dejado sin atención ni uso durante largos periódos de tiempo,
desconéctelo del receptáculo de la pared y desconecte la antena. Esto evitará
daños al aparato debido a rayos o a cambios bruscos en el voltaje de línea.
12. Nunca introduzca ningún tipo de objetos a través de las ranuras, ya que el
contacto con componentes de alto voltaje pueden poner en corto dichas
componentes que pueden resultar en incendios o descargas eléctricas,
Nunca derrame líquidos o cualquier tipo de productos.
EJEMPLO DE ATERRIZAMIENTO DE
CABLE DE ANTENA
GRAPA DE TIERRA
CODIGO NACIONAL ELECTRICO
CONDUCTORES DE TIERRA
(NEC SECCION 810-21)
UNIDAD DE
DESCARGA DE ANTEN
A
(NEC SECCION 810-20
)
EQUIPO DE
SERVICIO
ELECTRICO
GRAPA DE TIERRA
TIERRA DE SERVICIO DE POTENCIA
ELECTRODO DEL SISTEMA
(NEC ART 250, PARTE H)
“Nota al instalador del sistema de cable CATV :
Este recordatorio es dado para llamar la atención del instalador del sistema de cale CATV al Articulo 820-40
del NEC que provee guias para el aterrizamiento adecuado y, en particular, especifica que la tierra del cable
deberá de estar conectada al sistema de tierra del edificio, tan cercano al punto de entrada del cable como
sea practico.”
20
Importantes Medidas de Seguridad
ANTENA DE ACUERDO AL CODIGO
NACIONAL ELECTRICO (National
Electrical Code, ANSI/NFPA 70)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Sanyo DS24424 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur

dans d''autres langues