Sanyo DS24425 Le manuel du propriétaire

Marque: Sanyo

Modèle: DS24425

Catégorie: Téléviseurs LCD

Taper: Le manuel du propriétaire

FLAT

Model No.:

No. de Modelo:

de modèle :

Color TV Owner’s Manual

Color TV Manual Del Propietario

Manuel d’instructions du télécouleur

“Read this manual before assembling

(or using) this product.”

Important Safety Instructions . . . . . . 2

Welcome to the World of Sanyo . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . . . 3

Specifications . . . . . . . . . . . . . . . . . . . 3

Basic Set-up and Connections . . . . . . 4

Front & Rear Panel . . . . . . . . . . . . . . 5

Using the Component Video

and Audio Input Jacks . . . . . . . . . . . . 6

Using the Front A/V Input Jacks . . . . 7

Using the Rear A/ V Input Jacks . . . . 8

Using the Remote Control . . . . . 9 ~ 10

TV Adjustment and Setup

How to Operate the

On-Screen Menu . . . . . . . . . . . . . . 10

Audio Mode . . . . . . . . . . . . . . . . . 11

Adjusting Picture/Sound . . . . . . . . 11

Adding or Deleting a Channel . . . . 11

Aspect Ratio . . . . . . . . . . . . . . . . . 12

Closed-Captioning . . . . . . . . . . . . . . 12

V-Guide (Parental Control) . . . 13 ~ 14

Care and Cleaning . . . . . . . . . . . . . . 14

Helpful Hints (problems/solutions) . 15

Warranty (Mexico) . . . . . . . . . . . . . . 16

Warranty (U.S.A. and Canada) . . . . . 17

Child Safety Matters . . . . . . Back Cover

ESPAÑOL . . . . . . . . . . . . . . 18 ~ 35

Contenido . . . . . . . . . . . . . . . . . . . 18

FRANÇAIS . . . . . . . . . . . . . . 36 ~ 51

Table des matières . . . . . . . . . . . . 36

CONTENTS

DS24425

Printed in U.S.A. SMC, March 2005

Impreso en U.S.A. SMC, Marzo 2005

Imprimé aux É.-U. SMC, mars 2005

Part No. / No. de Parte/

de pièce : 1JC6P1P0173A–

Service Code/Código de Servicio/

Code de service : 610 312 9181

Importado Por :

Comercializadora México

Americana, S. DE R.L. DE C.V.

Nextengo Nº 78

Col. Santa Cruz Acayucan

Del. Azcapotzalco, México D.F. C.P.

02770, RFC CMA 9109119L0

Telefono: 55-5328-3500

Positioning the appliance

1. Do not place your appliance on an unstable cart, stand, shelf or table.

Serious injury to an individual, and damage to the appliance, may result

if it should fall. Your salesperson can recommend approved

carts and stands or shelf and wall mounting instructions. An

appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

2. Slots and openings in the cabinet and in the back or bottom are

provided for ventilation. To ensure reliable operation of the appliance and

to protect it from overheating, these openings must not be blocked or

covered. The openings should never be covered with a cloth or other

material, and the bottom openings should not be blocked by placing the

unit on a bed, sofa, rug, or other similar surface. This appliance should

never be placed near or over a radiator or heat register. This appliance

should not be placed in a built-in installation such as a bookcase unless

proper ventilation is provided.

3. Do not expose the appliance to rain or use near water . . . for example,

near a bathtub, swimming pool, kitchen sink, in a wet basement, etc.

Hooking Up Outdoor Antenna

LIGHTNING PROTECTION FOR YOUR ANTENNA AND SET AS PER NATIONAL

ELECTRICAL CODE INSTRUCTIONS.

4. If an outside antenna is connected to the receiver, be sure the antenna

system is grounded so as to provide some protection against voltage

surges and built up static charges. Article 810 of the National Electrical

Code, ANSI/NFPA 70, provides information with respect to proper

grounding of the mast and supporting structure, grounding of the lead in

wire to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

An outside antenna system should not be located in the vicinity of over-

head power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an outside antenna

system extreme care should be taken to keep from touching such power

lines or circuits as contact with them might be fatal.

Plug in the power cord

5. This product should be operated only from the type of power source indi-

cated on the marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or local power

company. This product is equipped with a polarized alternating current

line plug (a plug having one blade wider than the other). This plug will fit

into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of this polarized plug.

Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Power-supply cords should be routed so that they are not likely to be

walked on or pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

Cleaning

7. Before cleaning, unplug the unit from the wall outlet. Do not apply liquid clean-

ers or aerosol cleaners directly to the unit. Use a dry cloth for cleaning.

Service & Repair

8. Unplug the appliance from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

A. If the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the appliance.

C. If the appliance has been exposed to rain or water.

D. If the appliance has been dropped or the cabinet has been damaged.

E. If the appliance exhibits a distinct change in performance.

F. If the appliance does not operate normally by following the operating

instructions, adjust only those controls that are covered in the

operating instructions. Improper adjustment of other controls may

result in damage and will often require extensive work by a qualified

technician to restore the appliance to normal operation.

9. Upon completion of any service or repair, request the service technician’s

assurance that only Factory Authorized Replacement Parts that have the

same characteristics as the original parts were used, and that routine

safety checks have been performed to determine that the

appliance is in safe operating condition. Unauthorized substitutions may

result in fire, electrical shock, or other hazards.

10. Never add accessories that have not been specifically designed for use

with this appliance as they may cause hazards.

11. For added protection during a lightning storm, or when the set is left

unattended and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna. This will prevent damage to the set

due to lightning or power line surges.

12. Never push objects of any kind into this product through openings as

they may touch dangerous voltage points or short-out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL

ELECTRICAL CODE, ANSI/NFPA 70

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING

A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANY-

ING THIS UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE ADHERE TO ALL WARNINGS ON THE PRODUCT AND IN THE OPERATING INSTRUCTIONS. BEFORE

OPERATING THE PRODUCT, PLEASE READ ALL OF THE SAFETY AND OPERATING INSTRUCTIONS. RETAIN THIS

LITERATURE FOR REFERENCE.

Follow all instructions...

“Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40

of the NEC that provides guidelines for proper grounding and, in particular, specifies that

the cable ground shall be connected to the grounding system of the building, as close to

the point of cable entry as practical.”

NEC

- NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

 Trilingual On-Screen Menu

 Automatic Channel Search

 Auto Shut Off

 Closed-Captioning/Quikcap

 Digital picture controls with

on-screen display

 MTS stereo/SAP Decoder

 Auto Flesh Tone

 Factory preset adjustments for

picture/sound

 Front Surround Sound

 Tone

 V-Guide (Parental Control)

 Game Mode

 Aspect Ratio setting

 480i Component AV Input Jacks

 Audio/Video In Jacks

2 sets—Front (AV1), Rear (AV2)

 S-Video In Jack

 Sleep Timer (3 hours)

 TV Reset

 181 Channel Tuning System

VHF Channels 2-13

UHF Channels 14-69

Cable TV (CATV) 1, 14-125

 Automatic Fine Tuning

VHF and Cable Channels

 24-Key Remote Control

0~9 Numbered Channel Selection

Channel Scanning

Volume Mute

Power Recall

Display Sleep

Caption Reset

Menu V-Guide

Input

PICTURE TUBE SIZE, True Flat Screen

(Measured Diagonally) . . . . . . . . . . . . . . . . . . . . . . . . . 24-inches

PICTURE RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . . 260 Lines

Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Lines

ANTENNA INPUT . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75Ω

POWER REQUIREMENT . . . . . . . . . . . . . . . . . . . . . 120VAC 60Hz

POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 watts

HORIZONTAL DIM. (Width) . . . . . . . . . . . . . . . . 26.6 in. (677mm)

VERTICAL DIM. (Height) . . . . . . . . . . . . . . . . . 20.6 in. (524mm)

DEPTH DIM. (Thickness) . . . . . . . . . . . . . . . . . 18.9 in. (480mm)

WEIGHT (Approx.) . . . . . . . . . . . . . . . . . . . . 60.1 lbs. (27.3 Kg.)

SOUND (2 Speakers) . . . . . . . . . . . . . . . . . . . . . . . Size: 5x9 cm

AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in with 1W/ch

AUDIO/VIDEO INPUT JACKS . . . . . . . . . . . . . . . . . . . . . Video Input

. . . . . . . . . . . . . . . . . . . . Audio Input (2 sets, R/L – Front/Rear)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S-Video Input

480i COMPONENT VIDEO

INPUT JACKS . . . . . . Component Video Inputs (Y, Pb, Pr – R/L)

CAUTION: FCC Regulations state that improper modifica-

tions or unauthorized changes to this unit may

void the user’s authority to operate the unit.

Welcome to the World of Sanyo

Thank you for purchasing a Sanyo Color Television. You made an excellent choice for Performance, Styling,

Reliability, and Value. The TV is designed with easy to use on-screen set-up instructions and operating features.

Please retain this owner’s manual for future reference. Need assistance? Visit our Web site at

www.sanyoctv.com or call toll free 1-800-877-5032.We can help!

FEATURES

SPECIFICATIONS

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc.

It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,

casualty and electrical hazards.

CATV FRANCHISE NOTE:

Cable companies, like public

utilities, are franchised by

local government authorities.

To receive cable programs,

even with equipment which is

capable of receiving cable

channels, the consumer

must subscribe to the cable

company’s service.

AUDIO VIDEO

INPUT 2

UHF/VHF/CATV

75Ω

VIDEO

(MONO)

S-VIDEO

COMPONENT

FROM ANT.

OUT

OUT TO TV

CATV IN

OUT TO TV

S-VIDEO

CH3

CH4

VIDEO

L-AUDIO-R

VIDEO

L-AUDIO-R

IN FROM

SAT.

IN OUT

CONNECTING CABLE SERVICE, OR RF ANTENNA, OR SATELLITE DISH

RECEIVER TO TV



Cable Box

RF Antenna

Satellite Receiver

TV Back

INITIAL SET-UP

Install batteries in remote control,

see page 9.

Connect signal, see below.

Plug in AC power cord.

Press POWER key to turn on TV.

5. Follow on-screen instructions, see

pages 10 ~ 12.

VCR Back

Operational Tip for No Signal

Connection:

If the TV is used as a monitor only, with a

DVD player or some other type of external

equipment, and no cable or antenna signal

is available, the following setup is

necessary:

– Your TV is designed to automatically

search for available channels. Therefore,

the initial start up requires that you press

the MENU key, enabling the TV to auto-

matically go through the channel search

process before you can operate the TV.

After the initial channel search is com-

pleted, you must press the MENU key

again to complete the channel search

process. This may take several minutes.

– After the channel search process is com-

plete (2 searches), you can press the

INPUT key on the remote control to use

the TV as a monitor.

Notes:

– If you do not have a

cable box, connect

cable directly to TV

75 ohm jack or VCR.

– If you do not have a

VCR, connect signal

directly to TV 75 ohm

jack.

BASIC SET-UP AND CONNECTIONS



The TV will automatically select the correct Antenna

mode for the type of RF signal you connect.



TV will switch off automatically after 15 minutes if there

is no signal reception (cable out or station not broad-

casting).

Exception—When the Video mode is selected, the TV will

not automatically switch off when signal reception has

stopped for 15 minutes.



If you move the TV to a new location, press the RESET

key twice after connecting the signal and turning on the

TV.

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

AUDIO VIDEO

INPUT 2

UHF/VHF/CATV

75Ω

VIDEO

(MONO)

S-VIDEO

COMPONENT

POSITIONING THE TV

Do not position the TV in a confined

area. Allow space for normal air

circulation around electronic parts.

Audio Video Input 2 Jacks (AV2)

Connect video equipment here (see pages 6 and 8).

Note: S-Video connection will override an AV2

video connection.

S-Video In Terminal

To enhance video detail use the AV2

S-Video jack instead of the AV2 Video jack,

if available on your external equipment. (An

S-Video connection will override connection to

the AV2 video input jack. See page 8.)

480i Component Video In Jacks

(Component 2: Y, Pb, Pr)

Connect video equipment here

(see page 6).

Note: Audio Video Input 2 (AV2) and

Component inputs share the same

audio (R/L) input jacks.

MENU CH VOL POWER

VIDEO IN L- AUDIO -R

Audio Video Input Jacks (AV1)

Connect video equipment here (see page 7).

FRONT

BACK

FRONT AND REAR PANELS

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

CONNECTING A DVD PLAYER

Switch off TV and external equipment before connecting

cables. (Cables are not supplied.)



Connect a DVD Player or other equipment’s interlaced

Component Video Out to the TV Component Video In

(Y-Pb-Pr) Jacks.

 Connect the DVD Player’s Audio Out to the TV AV2

Audio In (L/R) Jacks.



Press POWER to turn on the TV. Turn on external

equipment also.

 To access Audio Video inputs, press the INPUT key to

select COMPONENT2.

Notes: DVD Player component output must be set to

Interlaced (480i).

Audio Video Input 2 (AV2) and Component inputs

share the same audio (R/L) input jacks.

Connect equipment to the Component2 video

input or the AV2 video input, but not both types at

the same time.

COMPONENT VIDEO OUT

AUDIO OUT

DIGITAL OUT

COAXIAL

S-VIDEO OUT

VIDEO OUT

SELECT

S-VIDEO COMPONENT

AUDIO VIDEO

INPUT 2

UHF/VHF/CATV

75Ω

VIDEO

COMPONENT

S-VIDEO

DVD Player



TV BACK



What you will need for connections:



Component video cable – 1

 Audio Cable – 1

1 2 3

RESETINPUT

POWER

123





Remote Control

USING THE COMPONENT VIDEO AND AUDIO INPUT JACKS

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032



A solid Blue screen with COMPONENT2 displayed

means that the Video mode is selected, but no signal

is being detected at the Component jacks. Check con-

nection, and turn on external equipment.



Press INPUT key after connecting cables to access

the AV inputs.There is NO need to tune to a blank

channel.

CONNECTING A VIDEO GAME OR OTHER

EQUIPMENT

Switch off TV and external equipment before connecting

cables. (Cables are not supplied.)



Connect game Audio Output (R/L) to the TV Audio

Input (R/L). Then connect game Video Output to the

TV Video Input.

 Press POWER to turn on the TV. Turn on external

equipment also.



To access Audio Video inputs, press the INPUT key to

select GAME or select using the menu.

MENU CH VOL POWER

VIDEO IN L- AUDIO -R

Camcorder

Video Game

What you will need for connections:



Audio Cable – 1

USING THE FRONT VIDEO AND AUDIO INPUT JACKS



A solid Blue screen with the word VIDEO1 displayed,

means that the Video mode is selected, but no signal is

being detected at the Video jacks. Check connections,

turn on external equipment.



Press INPUT key after connecting cables to access

the AV inputs. There is NO need to tune to a blank

channel.



Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

1 2 3

RESETINPUT

POWER

123





Remote Control

CONNECTING A VCR

OR OTHER EQUIPMENT

Switch off TV and external equipment before connecting

cables. (Cables are not supplied.)



Connect VCR or other equipment’s Audio Video Out to

the TV Audio Video Input.

For Mono VCR (Single Audio Jack) connect VCR

Audio Out to TV Audio (L) Input.



Connect DVD Player or other equipment’s S-Video

Out and Audio Out to the TV S-Video and Audio In

Jacks.

Using the S-Video jack overrides the Video (AV2) jack.



Press POWER to turn on the TV. Turn on external

equipment also.



To access Audio Video inputs, press the INPUT key

to select VIDEO2.

Note: Audio Video Input (AV2) and Component

inputs share the same audio (R/L) input jacks.

What you will need for connections:



AV Cable – 1

OPTIONAL CONNECTION



S-Video Cable – 1



Audio Cable – 1

COMPONENT VIDEO OUT

AUDIO OUT

DIGITAL OUT

COAXIAL

S-VIDEO OUT

VIDEO OUT

SELECT

S-VIDEO COMPONENT

AUDIO VIDEO

INPUT 2

UHF/VHF/CATV

75Ω

VIDEO

COMPONENT

R-AUDIO-L

R-AUDIO-L VIDEO

VIDEO

VHF/UHF

TO TV

FROM ANT.

CHANNEL

OUT

S-VIDEO



Back View of VCR

Rear TV AV Input Jacks

DVD Player



Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

USING THE REAR AUDIO/ VIDEO INPUT JACKS



Make sure all cable connectors are fully seated on jacks.



Always match AV cables according to the colors; red for

right audio, white for left audio and yellow for video.



Press INPUT key after connecting cables to access

the A/V inputs. There is NO need to tune to a blank

channel.



A solid Blue screen with the word VIDEO2 displayed,

means that the Video mode is selected, but no signal is

being detected at the Video jacks. Check connections,

turn on external equipment.

1 2 3

RESETINPUT

POWER

123





Remote Control

INSTALL BATTERIES AS SHOWN (2 AAA, not included)

Notes:

– Do not mix old batteries with new ones or mix different types of

batteries together.

– Remove the batteries if the remote control will not be used for a

month or more. Weak batteries may leak and cause damage.

(Normal battery life is roughly six months.)

REMOTE CONTROL KEYS



Power Key—Press to turn TV ON or OFF.



Input Key—Press to select the program source to watch:

TV signal or signal from DVD Player or other equipment

you have connected to the A /V jacks.



Number Keys—Press two keys to select a channel.

Example: Press 0 then 6 to select channel 6. For cable

channels 100 through 125, press and hold the 1 key until

C1–– appears. Then press the other two numbers.



Caption Key—(See page 12.)



Menu Key—Use this key with the  and – + keys to

navigate and adjust features of the on-screen menu system.

(See pages 10 ~ 12.)



Channel Scanning (CH ) and Volume (VOL – +)

Keys—Press to scan through the channels in memory and

to adjust the volume.

IMPORTANT NOTE: Spent or discharged batteries must be recycled or

disposed properly in compliance with all applicable laws. For detailed

information, contact your local County Solid Waste Authority.

(Continued on page 10.

)

USING THE REMOTE CONTROL



Be sure batteries are installed correctly.



Point the remote control toward the TV. Objects between

the remote control may cause misoperation of the remote

control function.



Cannot select channel with number keys. Press “0” in

front of numbers 1~9. Example: Channel 05.



Adjusting the volume level: Flashing Right arrow

indicates volume is increasing and flashing Left arrow

indicates volume is decreasing.

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

Point towards TV





1 2 3

4 5 6

7 8 9

MUTE

CAPTION SLEEP

RECALL

RESETINPUT

POWER

DISPLAY

123

456

789

VOL VOL











REMOTE CONTROL KEYS (CONTINUED)

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

1 2 3

4 5 6

7 8 9

MUTE

CAPTION SLEEP

RECALL

RESETINPUT

POWER

DISPLAY

V-GUIDE

123

456

789

VOL VOL









Mute Key—Press once to minimize the volume. Press again to

restore.



V-Guide Key—See pages 13 ~ 14.



Reset Key—Press this key twice to restore factory settings. The

TV will automatically start Channel Search and clear all cus-

tomized settings. These features will automatically reset:

•

Picture Adjustments: Color, Tint,

•

Caption to OFF

Contrast, Bright, Sharpness,

•

V-Guide to OFF

Tone, and Surround

•

Language to English

•

Audio to Stereo

•

Sleep Timer

•

Aspect Ratio to 4:3 (normal)

•

Video to TV

•

Channel Memory

If desired, personal settings can be made again using the menu

options.



Sleep Key—Press this key then press the “0” key to set the Sleep

Timer. The desired time can be set from 30 minutes up to 3 hours

in 30-minute increments. Sleep Timer will switch off the TV

automatically.

Note: The Sleep Timer cancels when the TV is turned off or

if a power failure occurs.

Recall Key—Press to switch between the last two channels you

selected.

Display Key—Press once to display the channel number. Press

twice to display the channel number continuously. Press again to

remove the channel number.

The on-screen menu provides the viewer with easy access to adjustments and settings.

Just use the keys on the remote control and follow the on-screen instructions.

HOW TO OPERATE THE ON-SCREEN MENU

1. Press MENU key.

2. Use the  keys to highlight the desired feature.

3. Use the – + keys to choose desired option. (



indicates selected item.)

4. Press the MENU key to exit.

Items with submenus require additional steps.

Note: The menu will display on the screen for approximately

20 seconds. Press Menu again to redisplay.

TV ADJUSTMENT AND SETUP

 keys – + keys

Audio



Stereo Mono

SAP

Picture/Sound



Auto Manual

Game

Antenna



Cable VHF/UHF

CH. Search



NO Start

CH. Scan Memory C 34 Added

Aspect Ratio



4:3 16:9

Espanol

Menu Language



English Francais

Press MENU key to exit

SETTING AUDIO MODE

Select desired sound setting, Stereo, Mono, or SAP

(secondary audio program).

Note: Stereo and SAP must be part of the broadcast

signal.

1. Choose Stereo, Mono, or SAP from the Audio options.

Note: The TV will automatically reset to stereo if

unplugged or a power failure occurs.

 keys – + keys



oo Mono SAP

ADJUSTING PICTURE/SOUND

For automatic picture/sound adjustment

Choose Auto from the Picture/Sound options.

Adjust the picture/sound manually

1. Choose Manual from the Picture/Sound options.

2. Press the MENU key to open the picture/sound

settings submenu.

3. Use the  keys to highlight the picture or sound

setting you want to change.

4. Use the

–– ++

keys to adjust settings.

For automatic game settings

1. Choose Game from the Picture/Sound options.

The screen andsound will automatically change to

factory preset settings.

2. Press the MENU key to exit.

Note: Select the front A/V input jacks by pressing

the INPUT key on the remote control.

 keys – + keys

Audio

Auto



Game

 keys – + keys

Color

Tint

Contrast

Brightness

Sharpness

Press MENU key to exit







dd OFF



Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

RESETTING THE ANTENNA/CABLE MODE

AND CHANNEL SEARCH

Resetting the Antenna/Cable Mode or CH. (Channel)

Search is required only if additional channels become

available, such as moving to another city or having a cable

service installed.

1. Choose Start from

the Ch. Search

menu options.

ADDING OR DELETING CHANNELS

1. Press the MENU key.

2. Use the  keys to highlight CH. Scan Memory.

3. Press the

key to highlight channel number entry area.

4. Enter the channel number you want to add or delete

(example): C34. For cable channels above 99, press and

hold the 1 key until C1– – appears. Then enter the other

two numbers.

5. Press the

key to change the present setting. Example:

Added will change to Deleted. This takes about three

seconds. During that time, the word “Added” or

“Deleted” will become yellow.

6. Use the 0 ~ 9 or  keys to choose other channels to

delete or add,

or press the

MENU key

to exit.

Aspect Ratio

Menu Language





CH. Scan Memory

Deleted

CH. Scan Memory

Aspect Ratio

Menu Language

Press MENU key to exit

hh NO





The menu will display on the screen for approximately 20

seconds. Press MENU again to redisplay.



Under weak stereo signal conditions, you may receive better

quality sound in the “Mono” position.



Surround sound will expand the sound effect while receiv-

ing MTS stereo signals.



When setting the Antenna mode, choose Cable if your TV

is connected to a cable system, otherwise choose VHF/UHF.



Channels deleted from scan memory can be selected with

the number keys.



Restoring deleted channels, use the on-screen menu to

manually add channels, or start CH. (Channel) Search from

the menu, or press the RESET key twice. (It may take a few

minutes to search thru the available channels.)

CAPTION1: Main mode used for

program captioning (words match the

program you are watching). These cap-

tions are generally one or two lines.

CAPTION2: An alternative mode for

program captioning. Caption2 may be

used by the broadcaster to provide cap-

tions in another language, such as,

Spanish or French.

TEXT1: This mode is used to display large

amounts of text. This text will appear within

a black box that may be nearly as large as

the TV screen. Text displayed in this

manner does not generally relate to the

program. Captions may be used by broadcast-

ers to provide weather reports, community bulletins, etc.

TEXT2: An alternative mode used to display large amounts

of text (same as Text1).

QUIKCAP: Allows captions to toggle on and off with

the Mute function. Press the MUTE key on the remote

control to block the TV sound; the captions display auto-

matically. Press the MUTE key again to restore the

sound, the captions will disappear. Quikcap displays

program captions in the Caption1 mode.

SETTING CAPTIONS

1. Press the CAPTION key on the remote control.

2. Press the 0 key on the remote control to select

options: OFF, CAPTION1, CAPTION2, TEXT1,

TEXT2, or QUIKCAP.

TWO OUTS AND TWO STRIKES

Caption1/ 2

TONIGHT: BECOMING MOSTLY

CLOUDY WITH A 40 PERCENT

CHANCE OF RAIN. COLD WITH

A LOW IN THE UPPER 30's WEST

WIND AROUND 20 MPH, SHIFT-

ING TO NORTHWEST AROUND

MIDNIGHT. FRIDAY: MOSTLY

CLOUDY AND COLDER WITH

A 50 PERCENT CHANCE OF

RAIN. HIGH IN THE MID 50's.

Text1/ 2

Captioning is text information transmitted along with the picture and sound so it can be displayed on the TV screen.

Because different types of captions can be transmitted with the TV signal, separate captioning modes are provided. The

captioning modes recognized by this model are: Caption1, Caption2, Text1, and Text2. Local broadcasters decide which

caption signals to transmit.

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032



If Caption Text mode is selected and no captioned text is

broadcasted, a black box may appear and remain on the TV

screen as shown.

To remove this black box, set captioning to any

mode other than Text1 or Text2 or press the

RESET key to cancel captioning and other cus-

tomized settings.



Channel number will not display continuously when cap-

tioning is on.

CLOSED-CAPTIONING

ASPECT RATIO

Use this feature when equipment is connected to the com-

ponent input jacks. The 4:3 setting is for normal viewing.

The 16:9 setting changes the picture image to widescreen

viewing with minimal portion of top and bottom

compressed.

1. Press the MENU key.

2. Use the  keys to highlight Aspect Ratio.

3. Press the

–– ++

keys to select 4:3 or 16:9.

Menu Language

Press MENU key to exit



16:9

MPAA and TV Parental Guidelines are rating systems that

provide advance cautionary information to parents about

the content of movie and television programming.

The V-Guide system contain both age-based and content-

based settings. This gives parents discretionary ways of

choosing appropriate material for their children to view.

Content ratings are represented by the initials D (Sugges-

tive Dialog), L (Adult Language), S (Sexual Situations), V

(Violence), and FV (Fantasy Violence). When program-

ming contains any or all of these conditions, these letters

become part of the icon that is displayed on the TV screen.

A rating icon will generally appear in the upper left hand

corner of the TV screen for about fifteen seconds at

the beginning of a program and should be repeated

at the beginning of the second hour of a long

program. It may also appear when returning from

commercials. There may be other instances when these icons

will be displayed as well. Parents are encouraged to become

familiar with these icons and their meanings.

NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA’S FCC V-CHIP

REGULATIONS. THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN

OTHER COUNTRIES.

Use this feature to supervise television viewing for young children. This television can be set to automatically block

programs with content you deem as inappropriate for your children to view, including: suggestive dialog, adult language,

sexual situations, violence, and fantasy violence.

The ability of the television to block the reception of specific programming content depends upon several conditions:

1) The program must be rated, 2) Networks must broadcast the rating code data, 3) Cable companies must transmit the

rating code signal, and 4) The TV must be properly setup to decode the signal.

SETTING MPAA MOVIE RATING

1. Press the V-GUIDE key on the remote control to display menu.

2. Press the

key to switch V-Guide ON.

3. Press the

key again. Then use the keys to highlight rating.

4. Press the MENU key to Block (B) or Unblock (U) selected rating.

( Arrow indicates selection.)

5. Press the

––

key to return to the V-Guide Options menu.

V-GUIDE

MPAA Movie Ratings

TV Parental Guidelines

Press MENU key to BLOCK

Use , – + keys to select

Press V-GUIDE key to exit

NC17 B



PG13 U

PG U

(Continued on page 14.)

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

V-GUIDE (PARENTAL CONTROL)

V-GUIDE OPERATION



Use the CHANNEL

 

keys and the VOLUME

– +

keys to navigate through the menus



V-Guide feature is accessible only from the remote

control.



The V-Guide display remains on screen for approximately

20 seconds. If it disappears, press the V-GUIDE key.

ABOUT MPAA AND TV PARENTAL GUIDELINES

SETTING TV PARENTAL GUIDELINES

6. Use the  keys to highlight TV Parental Guidelines.

7. Press the

key. Then use the  keys to highlight

rating.

8. Press the MENU key to Block (B) or Unblock (U)

selected rating. ( Arrow indicates selection.)

SETTING CONTENT-BASED GUIDELINES

9. Follow steps 6 and 7. Use the  keys to highlight

Content.

10. Press the MENU key to display the Content Option menu.

11. Use the  keys to highlight a category (D-Sugges-

tive Dialog, L-Adult Language, S-Sexual Situations,

V-Violence, FV-Fantasy Violence).

12. Press the

key. Then use the  keys to highlight

a rating.

13. Press the MENU key to Block (B) or Unblock (U)

selected rating. ( Arrow indicates selection.)

14. Press the V-GUIDE key to exit; or press the

––

key to return to the Content Options menu.

15. Repeat steps 11 through 13 to Block (B) or Unblock (U)

additional content ratings, if desired.

TURNING OFF THE V-GUIDE

1. Press the V-GUIDE key.

2. Use the

–– ++

keys to select OFF.

Note: Networks and local stations may or may not

include the content ratings portion of the TV

Parental Guidelines.

V-GUIDE

MPAA Movie Ratings

TV Parental Guidelines

TVMA B

TV14 B

TVPG B



TVY7 U

TV-Y U

Content

Press MENU key to BLOCK

Use , – + keys to select

Press V-GUIDE key to exit

V-GUIDE

MPAA Movie Ratings

TV Parental Guidelines

Press MENU key to set

Use , – + keys to select

Press V-GUIDE key to exit

TVMA B

TV14 B

TVPG B

TV-G B

TVY7 U

TV-Y U



D-Suggestive Dialog

L-Adult Language

S-Sexual Situations

V-Violence

FV-Fantasy Violence



TVPG B

Press MENU key to BLOCK

Use , – + keys to select

Press V-GUIDE key to exit

The surface of the cabinet can be damaged if not properly maintained. Many common household

aerosol sprays, cleaning agents, solvents, and polishes will cause permanent damage to the fine surface.

1. Unplug the power cord before cleaning the television.

2. Clean the screen and cabinet with a soft dry cloth.

Note:

Never spray liquids on the screen because it can run down and drip onto the chassis. This may

cause component failure not covered under Warranty.

CARE AND CLEANING



The TV will automatically block (B) ratings above or

unblock (U) ratings below selection. For example, if you

block rating R, NC17 and X will be blocked as well.



Blocking TVY7 does not block higher ratings.



You can block a content rating such as TVPG-V and still be

able to watch TVPG programs with ratings of S-L-D pro-

vided TVPG is unblocked (U).



To temporarily unblock or view Blocked (B) programs, set

V-GUIDE to OFF, or press the RESET key twice to clear all

Blocked (B) ratings and other customized settings.

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

Problem: Check these Conditions: Try these Solutions: Page No.

TV turns off

automatically.



Check signal (Cable/Ant.) connection.



Power surge protection feature.



Press POWER key.



The sleep timer may have been set.



Unplug TV momentarily.

No picture, poor

picture, or wavy

lines in picture.



Check antenna connections.



May be station trouble.



Brightness or Contrast misadjusted.



Possible interference from household

appliance.



Adjust antenna.



Try a different channel.



Select AUTO from Picture/Sound

on-screen menu or press RESET key.



Turn off Mixer, Drill, Blender, etc.

4, 11

No sound, poor

sound. No sound

on some channels.



May be station trouble.



MUTE function may be on.



Check Audio/ Video connections.



Try a different channel.



Adjust Volume.

6~9

Black box on

screen.



Caption Text Mode without display

information.



Press RESET key twice.



Switch OFF Captions (see page 12).

No Cable chan-

nels above

number 13.



Cable Channel Indicator C should appear next

to channel number.



Select CABLE from Antenna on-screen menu;

then start CH. (channel) Search using the menu.

No Captioning.



Check if station is broadcasting a Closed-

Caption signal.



Press CAPTION key to select Captioning.

Poor color or

no color.



Check if program is in color.



Check antenna connections.



Color or Tint misadjusted.



May be station trouble.



Try a different channel.



Adjust antenna.



Press RESET key to restart channel search.

Blue Screen with

Video1, Video2, or

Component2

displayed.



Check Audio/Video connections.



Check external equipment.



Check external equipment setting.



check DVD setting.



Press INPUT key.



Switch on external equipment.



Set external equipment output connections to

match input connections.

6 ~ 8

No TV Stereo or

SAP sound.



Check if station is broadcasting a true MTS

stereo signal or a SAP signal.



Select STEREO or SAP from Audio on-screen

menu.

Cannot select or

scan some

channels.



Channel may be removed from memory.



Check antenna connections.



V-Guide is set to block programming.



Select CH. SCAN MEMORY and manually add

channels or start CH. (channel) search.



Set V-GUIDE to OFF or press RESET key to clear

all setting.

13 ~ 14

Remote Control

will not work TV.



Check the batteries.



Check if TV is plugged in.



Replace batteries.



Aim remote control at front of TV.

9 ~ 10

Menu System

words seem

misspelled.



May be a different language is selected.



Reselect menu language choice using the on-

screen menu.

Cabinet makes

popping sound.



This is a normal condition during warm-up and

cool down of the plastic cabinet parts.

Because of the Quality we build into our product, very few problems are actual TV defects. Most problems only involve

simple hookup or setup changes that can be solved by the customer. Please check the chart below and try the solutions listed

for your problem. If the problem still persists, before returning your TV, please visit our website at www.sanyoctv.com or

call us toll free at 1.800.877.5032. We can Help!

HELPFUL HINTS (Problems/Solutions)

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

IMPORTADOR:

COMERCIALIZADORA MEXICO

AMERICANA, S.DE R.L. DE C.V.

AV. NEXTENGO N

COL. SANTA CRUZ ACAYUCAN

DEL. AZCAPOTZALCO, MÉXICO, C.P. 02770

RFC: CMA9109119L0

GUARANTEE

THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING DEFECTS AND

A ONE YEAR SERVICE WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:

COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.

UNDER THE FOLLOWING CONDITIONS:

1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUT BY THE STORE OR SUPPLIER

UNIT OR THIS SALES INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS INDICATED ON THIS

GUARANTEE.

2. IF THE FAULT IS ATTRIBUTED TO A MANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR YOUR

MONEY REFUNDED. DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE WILL BE VALID

AT THE STORE WERE THE APPARATUS WAS PURCHASED, PRESENTING THE ABOVE DOCUMENTS.

3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T

REPAIRED, COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE

THE EXCHANGE FOR AN EQUIVALENT APPARATUS OR THE RETURN OF THE BUYING-SALE COST

RESPECTIVELY.

4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF PRODUCT,

AND THE RESPECTIVE COST OF TRANSPORTATION.

THIS GUARANTEE WILL

BE NULL AND VOID IN THE FOLLOWING CIRCUMSTANCES:

WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.

WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS MANUAL.

WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE

MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.

CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES,

COMPONENTES, CONSUMIBLES Y ACCESORIOS:

SUCURSAL VALLEJO SUCURSAL MINERVA

Poniente 126 N

288 B Silos N

135, Col. Minerva

Col. Nueva Vallejo Deleg. Iztapalapa

México, D.F. México, D.F. 09810

Tels. 5567-5378 Tels. 5646-4551

5368-0105, 8589-8033 5646-4550

DESCRIPTION: ________________________________ BRAND: __________________ MODEL:__________________

CLIENT’S NAME: __________________________________________________________________________________

ADDRESS: ______________________________________________________________________________________

EXTERIOR NUMBER: _______________________ INTERIOR NUMBER: _______________________

SUB DIVISION: ____________________________________________ STATE/DELEGATION: _______________________

TELEPHONE: _____________________________________________

STAMP, DATE AND SIGNATURE

STORE

DESCRIPTION: Television

BRAND: SANYO

MODEL: DS24425

MEXICO GUARANTEE

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

ONE-YEAR LIMITED WARRANTY

THIS LIMITED WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE

UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING THE UNITED STATES’ OTHER

TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL PUR-

CHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.

FOR ONE YEAR from the date of purchase, Sanyo Manufacturing Corporation will replace any defective TV.

To insure proper warranty exchange, keep the original sales receipt for evidence of purchase. Return the

defective TV to the retailer along with the receipt and the included accessories, such as the remote

control. The defective TV will be exchanged for the same model, or a replacement model of equal value,

if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo

Manufacturing Corporation.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OBLIGATIONS

For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from

defects in material and workmanship under normal use and conditions. Should replacement be necessary under

this warranty for any reason due to manufacturing defect or malfunction during the first year from date of origi-

nal purchase, Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer.

For customer assistance, whether during or out of the warranty period, call toll free 1-800-877-5032.

Weekdays 7:30 AM – 7:00 PM Central Time

Saturday 7:30 AM – 4:00 PM Central Time

This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which

vary from state to state.

(EFFECTIVE: August 1, 2002)

For your protection in the event of theft or loss of this product, please fill in the information requested

below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.

Model No.______________________________ Date of Purchase _________________________

Serial No.______________________________ Purchase Price ___________________________

Where Purchased_________________________

(Located on back of unit)

Sanyo Manufacturing Corp.

3333 Sanyo Road, Forrest City, AR 72335

UNITED STATES AND CANADA WARRANTY

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

Importantes Medidas de Seguridad . . . . . . . . . . . . . . . 19

Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Ajustes Básicos y Conexiones . . . . . . . . . . . . . . . . . . . . 21

Panel Frontal y Posterior . . . . . . . . . . . . . . . . . . . . . . . . 22

Utilizando Las Entradas de Componente

de Video / Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Conectando una Reproductor de DVD . . . . . . . . . . . . 23

Usando Las Entradas Frontales de Audio / Video . . . . . . 24

Conecte un Juego de Video u otros equipos . . . . . . . 24

Usando las Entradas de Audio/Video . . . . . . . . . . . . . . 25

Conectando una VCR o Reproductor de DVD . . . . . . 25

Usando el Control Remoto . . . . . . . . . . . . . . . . . . 26 ~ 27

Ajustes del TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Como Operar el Menú en Pantalla . . . . . . . . . . . . . . . 28

Ajuste el modo de Audio . . . . . . . . . . . . . . . . . . . . . . 28

Ajuste de Imagen/Sonido . . . . . . . . . . . . . . . . . . . . . . 28

Búsqueda de Canales . . . . . . . . . . . . . . . . . . . . . . . . . 29

Agregando o Borrando Canales . . . . . . . . . . . . . . . . . 29

Relacion Imagen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Guía-V (Control Paternal) . . . . . . . . . . . . . . . . . . . 30 ~ 31

Transmisión Captada . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Cuidado y Limpieza . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Sugerencias Útiles—problemas / soluciones . . . . . . . 33

Garantía (México) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Garantía (Estados Unidos y Canadá) . . . . . . . . . . . . . . . 35

Bienvenido al mundo SANYO

Gracías por comprar un Televisor a Color Sanyo. Usted hizo una excelente selección por Funcionamiento,

Estilo, Confiabilidad, y Precio. El TV esta diseñado con instrucciones de fácil ajuste y operación en

pantalla.“Lea este manual antes ensamblar (o usar) este producto.” ¿ Necesita ayuda? Visite nuestro

sitio en internet en www.sanyoctv.com o llame sin costo al 1-800-877-5032.

¿ Necesita ayuda?

Visite nuestro sitio en internet www.sanyoctv.com o Llame 1-800-877-5032

ESPAÑOL MANUAL DE INSTRUCCIÓNES

CONTENIDO

PRECAUCION

RIESGO DE TOQUE ELECTRICO NO ABRIR!

PRECAUCION : PARA REDUCIR EL RIESGO DE TOQUE ELECTRICO, NO QUITE LA CUBIERTA (O

LA TAPA TRASERA). NO HAY PARTES ADENTRO QUE LAS PUEDA REPARAR EL USUARIO.

REFIERASE A PERSONAL CALIFICADO PARA REPARAR EL APARATO.

ESTE SIMBOLO INDICA QUE VOLTAJES PELIGROSOS QUE CONSTITUYEN

UN RIESGO DE TOQUE ELECTRICO ESTAN PRESENTES DENTRO DE ESTA

UNIDAD.

ESTE SIMBOLO INDICA QUE HAY INSTRUCCIONES IMPORTANTES DE

OPERACION Y MANTENIMIENTO EN LA LITERATURA QUE SE ANEXA A

ESTA UNIDAD.

ADVERTENCIA : PARA REDUCIR EL RIESGO DE FUEGO O TOQUE ELECTRICO, NO EXPONGA ESTE

APARATO A LLUVIA O HUMEDAD.

IMPORTANTES MEDIDAS DE SEGURIDAD

PRECAUCION : POR FAVOR SIGA TODAS LAS ADVERTENCIAS EN EL PRODUCTO Y EN LAS INSTRUCCIONES DE OPERA-

CION. ANTES DE OPERAR EL PRODUCTO, POR FAVOR LEA TODAS LAS INSTRUCCIONES DE OPERACION Y SEGURIDAD.

GUARDE ESTA LITERATURA PARA SU REFERENCIA.

Siga todas las instrucciones. . .

Colocando el aparato

1. No coloque su aparato en carrito, pedestal, anaquel o mesa que sean inesta-

bles. Heridas serias a un individuo, y avería al aparato, pueden resultar si

este cae. Su vendedor puede recomendar carritos y pedestales

o anaqueles e instrucciones para montaje en la pared. Una com-

binación de aparato y carrito deberá de ser movida con cuidado.

Paradas rápidas, fuerza excesiva, y superficies irregulares

pueda causar que la combinación de aparato y carrito se volteen

y caigan.

2. Las ranuras y aperturas en el gabinete y en la parte trasera e inferior fueron

provistas para ventilación del aparato. Para asegurar una operación confiable

del aparato y protejerlo de sobrecalentamiento, estas aperturas no deberán de

ser tapadas o cubiertas. Las aperturas nunca deberán de ser cubiertas con un

trapo u otro material, y las aperturas de la parte inferior no deberán de ser

tapadas poniendo la unidad en una cama, sofá, alfombra, u otra superficie

similar. Este aparato nunca deberá de ser puesto cerca o sobre radiadores de

calor. Este aparato nunca deberá de ser puesto en instalaciones tales como

libreros a no ser que haya una adequada ventilación en tales instalaciones.

3. No exponga el aparato a lluvia o a uso cerca de agua . . . por ejemplo, cerca

a una bañera, una alberca, un lavabo, en un sótano húmedo, etc.

Conectando la Antena Externa

PROTECCION EN CONTRA DE RAYOS ELECTRICOS PARA SU ANTENA Y APARATO DE

ACUERDO A LAS INSTRUCCIONES DEL CODIGO NACIONAL ELECTRICO (EUA).

4. Si una antena exterior es conectada al receptor, asegúrese que el sistema de

antena esté aterrizado para proveer alguna protección en contra de impulsos de

voltaje y la acumulación de cargas estáticas. El articulo 810 del código nacional

eléctrico de los Estados Unidos de América (National Electrical Code,

ANSI/NFPA 70), provee información con respecto al aterrizamiento correcto del

mástil y la estructura de soporte, el aterrizamiento del alambre a la antena en

una unidad de descarga, el tamaño de los conductores de aterrizamiento, la

localización de la unidad de descarga, conexión a los electrodos de aterriza-

miento, y requerimientos para los electrodos de aterrizamiento.

Una antena exterior no deberá de ser localizada en la vecindad de líneas de

potencia que pasen por encima de otros circuitos de luz eléctrica o de potencia,

o en donde pueda caer sobre tales líneas de potencia o circuitos. Cuando se

instale un sistema de antena externa, se debe de tener cuidado extremo en no

tocar tales líneas de potencia o circuitos ya que contacto con ellos puede llegar

a ser fatal.

Conectando el cordon de potencia

5. Este producto debe ser operado solamente con el tipo de cordón de potencia

indicado en la etiqueta. Si usted no esta seguro del tipo de alimentación en su

casa, consulte a su distribuidor de este producto, o a la compañía de

suministro eléctrico. Este producto esta equipado con cordón de potencia

polarizado (una de las navajas de la clavija es más ancha, que la otra). Esta

clavija debe de ajustar en el toma corriente de una manera solamente. Esta

característica es una medida de seguridad. Si usted no puede insertar la clavija

totalmente en el toma corriente, trate invirtiendo la clavija.Si la clavija continua

floja en el toma corriente, llame a su electricista, para reemplazar su toma

corriente obsoleto. No deshabilite el propósito de seguridad de esta clavija

polarizada. No sobre cargue los toma corrientes de pared, extensiones

eléctricas, o receptáculos integrales, ya que esta condición puede resultar en

un riesgo de fuego o descarga eléctrica.

6. Los cordones de potencia deben ser direccionados de tal manera que no

puedan ser pisados o dañados con enseres colocados a un lado arriba del

cordón de potencia. ponga una particular atención a los cordones de

potencia y clavijas, receptáculos de toma corrientes, y el punto donde ellos

salen del producto.

Limpieza

7. Antes de limpiar, desconecte la unidad del receptáculo de la pared. No

aplique limpiadores líquidos o en aerosol directamente a la unidad. Utilice

un trapo seco para limpiar.

Servicio y Reparación

8. Desconecte el aparato del receptáculo de pared y refiera servicio a personal

de servicio eléctrico calificado bajo las siguientes condiciones :

A Si el cordón de potencia o el conector están averiados o raídos.

B. Si líquido ha sido derramado en el aparato.

C. Si el aparato ha sido expuesto a lluvia o agua.

D. Si el aparato ha sido tirado o el gabinete a sido averiado.

E. Si el aparato exhibe un cambio perceptible en funcionamiento.

F. Si el aparato no opera normalmente siguiendo las instrucciones de

operación, ajuste solamente aquellos controles que han sido cubiertos en

las instrucciones de operación. Ajuste impropio de otros controles puede

resultar en avería al aparato y posiblemente requiera de trabajo extensivo

por un técnico calificado para restaurar el aparato a su operación normal.

9. Cuando se termine cualquier servicio o reparación, requiera del técnico de ser-

vicio confirmación de que solo Partes Autorizadas de Remplazo de Fabrica que

tengan las mismas características que las partes originales hayan sido usadas,

y que verificaciones de seguridad rutinarias hayan sido llevadas a cabo para

determinar que el aparato se encuentra en condiciones seguras de operación.

Substituciones no autorizadas pueden resultar en fuego, toque eléctrico u

otros peligros.

10. Nunca adicione accesorios que no han sido especificamente diseñados

para uso con este aparato.

11. Para protección adicional durante una tormenta eléctrica, o cuando el aparato

es dejado sin atención ni uso durante largos periódos de tiempo,

desconéctelo del receptáculo de la pared y desconecte la antena. Esto evitará

daños al aparato debido a rayos o a cambios bruscos en el voltaje de línea.

12. Nunca introduzca ningún tipo de objetos a través de las ranuras, ya que el

contacto con componentes de alto voltaje pueden poner en corto dichas

componentes que pueden resultar en incendios o descargas eléctricas,

Nunca derrame líquidos o cualquier tipo de productos.

EJEMPLO DE ATERRIZAMIENTO DE ANTENA DE ACUERDO AL CODIGO

NACIONAL ELECTRICO (National Electrical Code, ANSI/NFPA 70)

NEC

- NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

“Nota al instalador del sistema de cable CATV :

Este recordatorio es dado para llamar la atención del instalador del sistema de cale CATV al Artic-

ulo 820-40 del NEC que provee guias para el aterrizamiento adecuado y, en particular, especifica

que la tierra del cable deberá de estar conectada al sistema de tierra del edificio, tan cercano al

punto de entrada del cable como sea practico.”

¿ Necesita ayuda?

Visite nuestro sitio en internet www.sanyoctv.com o Llame 1-800-877-5032

 Menú en Pantalla Trilingüe

 Búsqueda Automática de

Canales

 Apagado Automático

 Transmisión Captada /

Quikcap

 Controles digitales de Imagen

desplegados en Pantalla

 MTS sonido estereofónico/

sonido SAP

 Tonos de piel por ajuste

Automático

 Ajustes de Fabrica para

Imagen/Sonido

 Frontal Ambient Sonido

 Tono

 V-Guide (Control Paternal)

 Mode de Jeugo

 Relacion Imagen

 Entrada de Audio/Video

Componente 480i

 Entradas de Audio/ Video

(Frontal (AV1), Posterior (AV2)

 Entrada de S-Video

 Cronómetro para Dormir (3 horas)

 Reajuste de TV

 Sistema de sintonía de 181

canales

VHF Canales 2-13

UHF Canales 14-69

Cable TV (CATV) 1, 14-125

 Sintonía Fina Automática

VHF y Canales de Cable

 24-Teclas Control Remoto

0~9 Selección de Canales

Numerados

Búsqueda de Canales

Volume Mute

Power Recall

Display Sleep

Caption Reset

Menu V-Guide

Input

TAMAÑO DEL TUBO DE IMAGEN (Pantalla de Realmente Plana)

(Medido Diagonalmente) . . . . . . . . . . . . . . . . . . . . . . . 24-pulgadas

RESOLUCIÓN DE IMAGEN . . . . . . . . . . . . . . . . . . . . . . . . 260 Líneas

Entrada de Video

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Líneas

ENTRADA . . . . . . . . . . . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75Ω

FRECUENCIA DE OPERACION . . . . . . . . . . . . . . . . . . . . . . . . 60Hz.

TENSION DE ALIMENTACION . . . . . . . . . . . . . . . . . . . . . . . . . 120

V~CONSUMO DE CORRIENTE . . . . . . . . . . . . . . . . . . . . . . 78 watts

DIMENSIÓN HORIZONTAL (Ancho) . . . . . . . . . . 26.6 in. (677mm)

DIMENSIÓN VERTICAL (Alto) . . . . . . . . . . . . . . . 20.6 in. (524mm)

DIMENSIÓN EN PROFUNDIDAD (Grosor) . . . . . .18.9 in. (480mm)

PESO (APROX.) . . . . . . . . . . . . . . . . . . . . . . . . 60.1 lbs. (27.3 Kg.)

SONIDO (2 Bocinas) . . . . . . . . . . . . . . . . . . . . . Tamaño: 5x9 cm

AMPLIFICADOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Interon 1W/canal

ENTRADAS DE AV . . . . . . . . . . . . . . . . . . . . . Entrada de Video (2)

. . . . . . . . . . . . . . . . .Entrada de Audio (2-R/L – Frontal/Posterior)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S-Video

ENTRADAS DE COMPONENT 480i

AUDIO/VIDEO . . . . . . . . . . . . . . . . . . . . . Entrada (Y, Pb, Pr – R/L)

PRECAUCION : Las Regulaciones de FCC declaran, que las

modificaciones no apropiadas o cambios no

autorizados a esta unidad, pueden anular la

autoridad del usuario para operar la unidad.

¿ Necesita ayuda?

Visite nuestro sitio en internet www.sanyoctv.com o Llame 1-800-877-5032

CARACTERÍSTICAS

ESPECIFICACIONES

Este símbolo impreso, significa que el producto esta listado por Underwriters’s Laboartories Inc. El

diseño y manufactura de este producto, reúne los rígidos estándares de U.L., contra riesgos de

incendio, accidentes o descargas eléctricas.

La page est en cours de chargement...

Sanyo DS24425 Le manuel du propriétaire

Marque: Sanyo

Modèle: DS24425

Catégorie: Téléviseurs LCD

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Sanyo DS24425 Owner's manual
español: Sanyo DS24425 El manual del propietario

Sanyo DS24425 Le manuel du propriétaire

Sanyo DS24425 Le manuel du propriétaire

dans d''autres langues

Documents connexes