Rand McNally TND 730 Guide de démarrage rapide

Taper
Guide de démarrage rapide
Quick Start Guide .......................1
Guide de Démarrage Rapide .... 20
Guía de Inicio Rápido ............... 40
.......................
1
Guide de Démarrage Rapide
....
20
...............
40
1
Important Information About Your IntelliRoute
®
TND
730 LM
RAND MCNALLY DOCK: Keep your device up to date by downloading the Rand McNally Dock for your home
computer at www.randmcnally.com/dock and connecting your device with the USB cable provided.
WI-FI
®
: Some features of this device require wireless connectivity, which requires a supporting feature (such as a
smartphone with tethering) and data plan from your wireless service provider. As the user, you are responsible for all data
charges. Please contact your wireless service provider to make sure you do not exceed the limits of your data plan.
POWER BUTTON: Press and hold the orange power button to turn the device on or off. The power button can also
be used for quick access to certain features while the device is running. See Preferences > General > Quick Power
Press for options. A red light indicates the battery is charging; a green light indicates the battery is fully charged.
RESET: Use the reset button on the back of the device to restart. This will cancel the current route, but preferences,
address book, and other personal data will be saved.
LEARN MORE: Access Tutorial & Tips under Preferences > General on your device for more information, or visit
www.randmcnally.com/support to download the user manual.
Some screens include help tips. Tap this button to access.
WARNING: This product contains chemicals known to the State of California to cause cancer and/or other harm.
2
Install the Mount
NOTE: Follow all local regulations governing the placement of the mount. Select an area with a line of sight to the sky
and GPS satellites to ensure reliable GPS information.
1. Clean and dry the mounting area.
2. Remove the suction cup protective fi lm.
3. Adjust the angle of the mount using the thumbscrew.
4. Pull the suction cup lever up to release suction.
5. Plug the power cord into the device and the
vehicle’s 12-volt power source.
6. Slide the device onto the mount.
7. Place and hold the mount suction cup against the
mounting surface.
8. Press the suction cup lever down until it snaps into place.
9. Adjust the device so that it can be easily seen and does not block the driver’s line of sight.
3
1
4
5
8
6
7
2
3
Main Menu
1
Enter truck information and access
truck-specifi c use tools.
2
Show location on the map and view
navigation instructions.
3
Choose a destination.
4
Select device, route and map preferences.
Access the tutorial.
5
Mute/unmute the speaker.
6
Adjust speaker volume.
7
Indicates charge when running on battery.
8
Change driver profi le, trailer load,
or driver status.
Note: You can select different color schemes in Preferences > General > Skin Style. The following screen images
appear in the “Ice” style. Some screens may appear different, based on model number.
Note: From other screens, tap the Main Menu icon in the bottom right corner to return to the Main Menu.
4
Enter Truck Information and Set Warnings
1. Tap Truck Tools > Truck Info or Warnings.
2. Tap
and to view options.
3. Tap the option button to be changed.
4. Enter new settings.
5. Tap
to save changes.
Set Routing and Device Options
1. Tap Preferences.
2. Tap the General, Route or Map tab.
3. Tap
and
to view options.
4. Tap the option button to be changed.
5. Enter new settings.
6. Tap
to save changes.
On the left,
tap on an
option
On the left,
tap on an
option
On the
right,
enter
settings
for the
option
On the
right,
enter
settings
for the
option
5
Destination
1
Route to a new location. (See page 6.)
2
Return to a previously entered address.
3
Access the Address Book.
4
Plan a multi-stop trip.
5
Route to a point of interest. (See page 10.)
6
Run an Internet search for a location by name or keyword.
(NOTE: This feature requires a Wi-Fi connection.)
1 2 3
4 5 6
6
Route to a New Location
1. Tap Choose Destination > New Location.
2. Tap Address.
3. Enter the name of the city. (NOTE: As you type, the
keyboard displays only the next possible letter.)
4. Prompts appear in the top bar. Tap the city to select. Or,
tap List to view cities beginning with the letter(s)
you entered.
5. Enter the street name. (NOTE: If the letters you need do
not appear, tap Expand Search.)
6. Enter the house number. (NOTE: To enter the house
number before the street, tap the house number
button in the previous step.)
See Confirm Destination Window (page 7.)
Tips
You can also route to a new location by City Center,
Intersection, or Latitude/Longitude, or choose
Address > Zip Code Search.
View recent destinations by tapping Choose Destination > History. View recent cities by tapping Choose
Destination > New Location > Address > History.
View saved locations by tapping Choose Destination > Address Book.
7
Confi rm Destination Window
1
Destination address.
2
Begin route to destination.
3
Compare a primary and alternate route and choose one.
4
Add the location as a via point on the way to
a previously entered destination.*
5
Save the location to the Address Book.
6
Cross reference to printed Rand McNally
Motor Carriers’ Road Atlas.
7
View the map.
8
Change the starting location for a route to the
location displayed here.
9
Return to Main Menu.
10
Return to previous window.
*To manage via points, Tap Choose Destination > Multi-
Stop Trips. You can add up to 50 destinations in a multi-stop
trip, and optimize routing for trips of up to 10 stops.
NOTE: This window may include
additional buttons based on the
type of destination selected.
1
3
5
6 7
9
8
10
2
4
8
Route Map Window
1
Repeat spoken next-maneuver instructions.
2
Name of street you will turn onto next.
3
Show arrival time, remaining time, or other options.
4
Slide out to show upcoming exit information.
5
Directions list slideout. Tap Route Display Options
to select detail view, highway view, trip summary,
or summary map view.
6
Zoom in/zoom out.
7
Access Wi-Fi connected services.
8
Return to Main Menu.
9
Current direction. Tap to select a map display option (Heading Up, North Up, or 3D View). Also displays Wi-Fi
®
status.
10
View current road name, upcoming cross road name, or city, county and state. Also displays advanced lane guidance
and weather (when activated). Tap to change.
11
View and save current location, detour, or cancel a route.
12
Tap on the current speed to display the Virtual Dashboard. (NOTE: Turns red for speed warnings; set in Truck
Tools > Warnings.)
1
3
4
5
6
8
7
9
2
10
11
12
14
13
16
15
9
Route Map Window - continued
13
Current speed limit—orange for truck limit, white for general limit. Tap to open a “Tell Rand” about speed limits.
14
View the Traffi c Window (enabled with Traffi c Everywhere).
15
Mute the speaker.
16
Minimize icons to show simply the map and next maneuver.
Junction View
When on a route, Junction View displays when you have an upcoming
maneuver. Once past the maneuver, Junction View closes and the previous
window displays.
1
Signs to follow for the next maneuver.
2
Number and direction of lanes for the next maneuver.
3
Distance to the upcoming maneuver. Distance decreases as you
approach the ramp.
4
Lane assist arrow.
5
Mute the speaker.
6
Return to previous window.
1
3
2
4
56
10
Find a Point of Interest (POI)
Tap Choose Destination > Points of Interest.
1
Find popular truck-friendly POIs near your current location.
Search for a POI:
2
Near your truck
3
In a particular city
4
Along your route
5
Along the last 30 minutes of your driving day
(using the time remaining in Truck Tools > Timers)
6
Near your destination
POI Categories
7
Select a category.
8
Find restaurants, hotels, and other subcategories.
9
View custom POIs that have been uploaded through
the Rand McNally Dock.
8
7
9
1
3
4
5 6
2
11
Local Search
Tap Choose Destination > Local Search.
(
Note: This feature requires a Wi-Fi connection.)
Search for a location by name or keyword near:
1
Your truck
2
A particular city
3
Your destination
4
Search for local restaurants.
5
Access recent searches.
Find a Point of Interest (POI) - continued
10
Tap location to select.
11
View and edit ratings and comments.
12
Tap to search by available services.
13
Apply or remove services fi lter for search results.
14
Search POI by name.
10
11
12 13
14
1 2 3
4 5
12
Virtual Dashboard
1
Current direction of travel.
2
Displays current time at the yard, current location
and your destination.
3
Sunrise and sunset times based on vehicle location
(latitude/longitude) and day.
4
Current speed (above) and posted speed limit (below).
5
Elevation at current location.
6
Percentage of current trip completed, distance to next
maneuver, and the number of miles and time spent
on the trip to this point.
7
Return to the Route Map Window.
8
Gather trip information for up to three trips. Includes odometer settings, hours, and speeds.
9
Reset trip information for the selected trip (Tab 1, Tab 2 or Tab 3).
10
Select to automatically reset the information in each tab after the vehicle has remained stationary
for the specifi ed number of hours.
11
View fuel logs and add fuel purchase information.
12
Match with truck's odometer to automatically update new fuel logs.
Tap the pencil to edit.
1
3
4
5
6
7
9
10
11
8
2
12
13
View Timers and Logs
1. Tap Truck Tools > Timers, Logs, Trails, Fuel.
2. Tap Timers to view timers, odometer readings, and average speed.
3. Tap on a field to change or reset the number.
NOTE: Countdown timers are controlled by the Driver Status
(Driving, On Duty, or Off Duty) selected on the Main
Menu.
To switch driver profiles, tap the driver information field.
4. Tap Logs to view a list of mileage logs by quarter.
5. Tap on a quarter to view individual logs by state.
NOTE: You can export logs to your computer through the
Rand McNally Dock.
14
View Trails and Fuel
1. Tap Truck Tools > Timers, Logs, Trails, Fuel.
2. Tap Trails to record a “bread-crumb” path of GPS
coordinates where your truck has traveled.
3. Tap any record to view the trail, edit the name
or set the color.
4. Tap Show on Map to display the trail on the
Route Map Window.
5. Tap Fuel to view a list of fuel logs by quarter.
6. Tap on a quarter to view individual logs by state.
7. Tap Add Fuel to record the date, location and cost
of fuel purchase.
8. Tap on a field to make changes.
9. Check Taxable to include the purchase in the fuel log.
10. Tap Save.
15
Wi-Fi
For information on setting up a Wi-Fi hotspot through your cellular phone or laptop computer, please visit
www.randmcnally.com/wifi help for basic instructions, or contact your wireless carrier.
NOTE: Wi-Fi connectivity requires a supporting feature and data plan from your wireless service provider.
As the user, you are responsible for all data charges. Please contact your wireless service provider to make sure
you do not exceed the limits of your data plan.
Once you have established a Wi-Fi hotspot:
1. From the Main Menu, tap Preferences. Or tap the Wi-Fi
connected services icon on the map screen.
2. Tap Wi-Fi in the bottom right corner.
3. Tap Enable Wi-Fi to search for available hotspots.
4. Tap the hotspot you want to connect to.
5. Enter the network password.
6. Tap Disable Wi-Fi to turn Wi-Fi connectivity off.
(NOTE: Disable to save battery power.)
16
Weather, Fuel Prices, and Traffi c Everywhere
Note: These features require a Wi-Fi connection.
Tap the Wi-Fi connected services icon (
) on the map screen.
Tap each tab to view live information.
Weather:
1
Tap to view details for current weather alerts.
2
View weather information at your destination.
3
Display weather on the map as you drive.
Fuel Prices:
4
Check to show fuel prices on the map screen.
5
Sort results by distance or price.
6
Set fi lters for type and brand of fuel.
7
Choose to search near your vehicle or along your route.
Traffi c Everywhere:
Live traffi c information is available as a premium service on the Rand McNally Dock. (See page 17.)
1
3
2
4
6
7
5
17
More Information
For a detailed description of the features of your device, please see the IntelliRoute
®
TND
730 LM User Manual. The User
Manual can be downloaded from the Rand McNally Dock, and is also available at www.randmcnally.com/support.
Rand McNally Dock
The Rand McNally Dock enables you to receive software upgrades and access map updates, construction updates, and
additional features. Simply download the Dock software for your PC or Mac at www.randmcnally.com/dock and
connect your device using the USB cable provided.
With the Rand McNally Dock, you can also:
Purchase Traffic Everywhere
Export mileage and fuel logs to your home computer
Upload custom POIs, such as red light cameras, to your device
Download the User Manual
Access the Rand McNally support site and online store
Read product news and announcements
Send feedback and suggestions to Rand McNally through “Tell Rand”
18
Pay attention to road conditions and street signs, and obey all traffic and safety laws. Traffic laws and current traffic conditions must always be observed and take precedence
over the instructions issued by the TND
product navigation system. The User should be aware of situations where current traffic conditions and the instructions from the navigation
system may be in conflict. Some states prohibit the use of windshield mounts and may otherwise restrict the usage of navigation and other electronic devices in the vehicle. It is the User’s
responsibility to ensure compliance with all laws and regulations. The use of the navigation system does not relieve the User of his/her responsibilities. The User is ultimately responsible for the
vehicle under his/her control and should be aware of the surroundings at all times.
If after reading these statements the User decides not to accept these terms, the User should not use the TND
product.
Rand McNally hereby grants you (“User”) a single-user non-exclusive, non-transferable license to use the Rand McNally IntelliRoute
®
TND
trucking navigation product (hereinafter referred to
as the “TND
product” (including software and associated data) ) for User’s own internal business or personal use and not for resale, sublicense or commercial use.
This TND
product and the software incorporated in it and related documentation are furnished under license and may be used only in accordance with this license. Except as permitted by
such license, the contents of this TND
product and software may not be disclosed to third parties, copied or duplicated in any form, in whole or in part, without the prior written permission
of Rand McNally. This TND
product and software contain proprietary and confidential information of Rand McNally and its licensors. Rand McNally grants User a limited license for use of this
TND
product and the software incorporated in the TND
product for its normal operation. By using the TND
product, User acknowledges that the content of this document and the TND
product are the property of Rand McNally and its licensors and are protected by U.S. copyright, trademark and patent laws and international treaties.
THE USER MAY NOT:
• Use the TND
product on a network or file server, time-sharing or to process data for other persons.
• Use the TND
product to create any routing tables, files, databases or other compendiums.
• Copy, loan or otherwise transfer or sublicense the TND
product, its software or content.
• Modify, or adapt the TND
product in any way, or decompile, disassemble, reverse engineer or reduce to human readable form the TND
product and software incorporated therein.
Alter, remove or obscure any copyright notice, trademark notice, or proprietary legend from the TND
product, its software or content.
This license will terminate automatically if User fails to comply with any of the terms of this license and User agrees to stop using the TND
product. Rand McNally may revise or update the
TND
product and is not obligated to furnish any revisions or updates to User.
RM Acquisition, LLC d/b/a Rand McNally warrants that the TND™ product, and the component parts thereof, will be free of defects in workmanship and materials for a period of one (1) year
from the date of first use as determined by contact with GPS satellites. This warranty may be enforced by the first consumer purchaser (“Customer”), provided that the product is utilized within
the U.S.A. or Canada.
Rand McNally will, without charge, repair or replace (with a new or newly reconditioned unit), at its option, defective TND™ products or component parts. For repair or replacement of
defective TND™ products, Customer must contact Rand McNally at 1-800-333-0136 for return authorization and instructions. Customer will be required to have the product registered via
the Rand McNally Dock or, if Customer is unable to register the product electronically, Customer will be required to provide proof of date of first Customer purchase, such as a duplicate copy
of a sales receipt, for the warranty to be valid. When the product is connected to the Rand McNally Dock, the Dock will record the date of first use of the device based on contact with GPS
satellites. The Customer must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Rand McNally’s expense, if the product is
repaired or replaced under warranty.
Repairs or replacements have a 90-day warranty. If the product sent in is still under its original warranty, then the new warranty is 90 days or to the end of the original one (1) year warranty,
depending on which is longer.
This warranty gives the Customer specific rights. Other rights may be available to Customer which vary from state to state.
Warnings, End-User License Agreement, and Warranty
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Rand McNally TND 730 Guide de démarrage rapide

Taper
Guide de démarrage rapide