Allen-Bradley C Series Guide d'installation

C Series
Marque
Allen-Bradley
Modèle
C Series
Taper
Guide d'installation
!

!
(Catalog Number 1771-IXHR Series C)
Use this document as a guide when installing the 1771-IXHR/C High
Resolution Thermocouple/mV input module.
The High Resolution Thermocouple/Millivolt input module is
sensitive to electrostatic discharge.
!
ATTENTION: Electrostatic discharge can damage
integrated circuits or semiconductors if you touch
backplane connector pins. Follow these guidelines
when you handle the module:
• Touch a grounded object to discharge static potential
• Wear an approved wrist-strap grounding device
• Do not touch the backplane connector or
connector pins
• Do not touch circuit components inside the module
• If available, use a static-safe work station
• When not in use, keep the module in its
static-shield bag
Installation Instructions
Allen-Bradley 1771-IXHR
High Resolution Thermocouple/Millivolt Input Module 5
Connect your I/O devices to the field wiring arm (cat. no. 1771-WI)
shipped with the module.
!
ATTENTION: Remove power from the 1771 I/O
chassis backplane and field wiring arm before
removing or installing an I/O module.
• Failure to remove power from the backplane or
wiring arm could cause module damage, degradation
of performance, or injury.
• Failure to remove power from the backplane could
cause injury or equipment damage due to possible
unexpected operation.
1
•
•
High Resolution Thermocouple/Millivolt Input Module10
•
•
•
•
!
•
•
•
•
!
•
•
•
•
Allen-Bradley 1771-IXHR
High Resolution Thermocouple/Millivolt Input Module 11
µ
µ µ
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Allen-Bradley C Series Guide d'installation

C Series
Marque
Allen-Bradley
Modèle
C Series
Taper
Guide d'installation
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents