Miller RFCS-14 Le manuel du propriétaire

Catégorie
Système de soudage
Taper
Le manuel du propriétaire

Ce manuel convient également à

Foot Controls
RFCS-5, RFCS-5HD, RFCS-6M,
RFCS-14, And RFCS-14HD
OM-844 183973P
2020-06
OWNER’S MANUAL
For product information,
Owner’s Manual translations,
and more, visit
www.MillerWelds.com
Miller Electric manufactures a full line
of welders and welding-related equipment.
For information on other quality Miller
products, contact your local Miller distributor to receive the latest full
line catalog or individual specification sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller, or visit us at
www.MillerWelds.com on the web.
Thank you and congratulations on choosing Miller. Now you can get
the job done and get it done right. We know you don’t have time to do
it any other way.
That’s why when Niels Miller first started building arc welders in 1929,
he made sure his products offered long-lasting value and superior
quality. Like you, his customers couldn’t afford anything less. Miller
products had to be more than the best they could be. They had to be the
best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owners Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety Precautions. They
will help you protect yourself against potential hazards on the worksite.
We’ve made installation and operation quick
and easy. With Miller, you can count on
years of reliable service with proper
maintenance. And if for some reason the unit
needs repair, there’s a Troubleshooting
section that will help you figure out what the
problem is, and our extensive service
network is there to help fix the problem.
Warranty and maintenance information for
your particular model are also provided.
Miller is the first welding
equipment manufacturer in
the U.S.A. to be registered to
the ISO 9001 Quality System
Standard.
Working as hard as you do
every power source from
Miller is backed by the most
hassle-free warranty in the
business.
From Miller to You
Mil_Thank1
202001
TABLE OF CONTENTS
SECTION 1 INSTALLATION AND OPERATION 1...............................................
1-1. Safety Symbol Definitions 1.............................................................
1-2. Software Licensing Agreement 1.........................................................
1-3. Information About Default Weld Parameters And Settings 1...................................
1-4. Typical Connection 2..................................................................
1-5. Remote Amperage Control For Welding Power Source Without
Remote Control Switch 2...............................................................
1-6. Remote Amperage Control For Welding Power Source With Remote Control Switch
But Without Output (Contactor) Control 3..................................................
1-7. Remote Amperage Control For Welding Power Source With Remote Control Switch
And Output (Contactor) Control 4.........................................................
1-8. Adjusting Potentiometer Timing 5.........................................................
1-9. Changing Cord Location On RFCS-5HD, RFCS6MHD, And RFCS-14HD Models 5..............
SECTION 2 ELECTRICAL DIAGRAMS 6......................................................
SECTION 3 PARTS LIST 7...................................................................
WARRANTY
OM-844 Page 1
SECTION 1 INSTALLATION AND OPERATION
1-1. Safety Symbol Definitions
DANGER! Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
DANGER ! - Indique une situation dangereuse qui, si elle
n’est pas évitée, entraînera la mort ou des blessures
graves. Les éventuels risques sont représentés par les
symboles joints ou expliqués dans le texte.
Fsafe1 2013-10
Arc rays can burn eyes and skin wear a welding helmet
with correct filter, and cover exposed skin with nonflam-
mable clothing.
Le rayonnement de l’arc peut provoquer des brûlures au
niveau des yeux ou de la peau – porter un casque protec-
teur muni d’un écran de filtre approprié et porter des vête-
ments non inflammables pour protéger toutes parties
exposées.
Fsafe11 2018-01
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
Indique une situation dangereuse qui, si elle n’est pas
évitée, entraînera la mort ou des blessures graves. Les
éventuels risques sont représentés par les symboles
joints ou expliqués dans le texte.
Fsafe2 2013-10
Wear safety glasses with side shields.
Porter des lunettes de sécurité avec écrans latéraux.
Fsafe8 2013-10
NOTICE
Indicates statements not related to personal injury.
Signale des consignes non associées aux dommages
corporels.
Indicates special instructions.
Fournit des instructions spéciales.
Fsafe3 2013-10
Welding sparks can cause fire or explosion. Move flam-
mables away. Do not weld on closed tanks or barrels, or
on containers that have held combustibles they can
explode. Clean tanks or barrels properly.
Les étincelles de soudure peuvent provoquer un incendie
ou une explosion. Ne pas souder de cuves ou de ton-
neaux, au risque qu’ils explosent. Nettoyer soigneuse-
ment les cuves ou tonneaux.
Fsafe9 2018-01
Beware of electric shock from wiring. Disconnect input
power before installing this kit. Reinstall all panels and
covers.
Attention aux décharges électriques au contact des
câbles. Couper l’alimentation électrique avant d’installer
ce kit. Réinstaller tous les panneaux et couvercles.
Fsafe7 2013-10
CALIFORNIA PROPOSITION 65 WARNINGS
WARNING: Cancer and Reproductive Harm www.P65W
arnings.ca.gov
PROPOSITION CALIFORIENNE 65 AVERTISSEMENTS
AVERTISSEMENT : cancer et troubles de la reproduction www.P65W
arnings.ca.gov
.
Fsafe26 2018-01
1-2. Software Licensing Agreement
The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at
https://www
.millerwelds.com/eula
and are incorporated by reference herein.
1-3. Information About Default Weld Parameters And Settings
NOTICE Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical welding
parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are for reference
purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriateness of all parameters
and settings should be evaluated and modified by the end user as necessary based upon application-specific requirements. The end user is solely
responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld parameters and settings, and ultimate
quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warranties including any implied warranty of fitness
for a particular purpose.
OM-844 Page 2
1-4. Typical Connection
Ref. 801736
! Turn Off welding power
source before connecting
foot control.
1. Foot Control
2. Remote 14, Remote 5, Or
Remote 6 Receptacle
Insert plug into matching 14-sock-
et, 5-socket, or 6-socket recep-
tacle, as applicable, on welding
power source. Tighten collar.
1
2
1-5. Remote Amperage Control For Welding Power Source Without
Remote Control Switch
Ref. 155790-H
On
0 A DC
Off
Select Maximum
Amperage Percentage.
Select Weld Process Select Range And Polarity
33 A DC
Combination Front Panel
And
Remote Control
Approximately
50% = Approx. 33 A DC
Press pedal lightly to turn
weld output and gas flow
on. Press pedal further to
increase weld output.
Release pedal to turn off
weld output and gas flow.
OM-844 Page 3
1-6. Remote Amperage Control For Welding Power Source With Remote Control Switch
But Without Output (Contactor) Control
. See welding power source
Owner’s Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Ref. 122023-B / 801736
OR
Example Of Full Remote Amperage Control
Set Switch
In Example:
Min = 30 A In Range A or 40 A In
Range B (Unit Minimum)
Max = 95 A In Range A or 200 A In
Range B (Control Setting)
Control Setting
Does Not Matter
Unit Maximum
In Example:
Min = 30 A In Range A or 40 A
In Range B (Unit Minimum)
Max = 225 A In Range A or 375 A In
Range B (Unit Maximum)
Unit Minimum
Unit Minimum
Control Setting
Set Desired Maximum
Amperage For Application
Set Switch
Press pedal to increase weld
output. Release pedal to
decrease weld output.
Press pedal to increase weld
output. Release pedal to
decrease weld output.
Example Of Combination Front Panel
And Remote Amperage Control
. See welding power source
Owner’s Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
OM-844 Page 4
1-7. Remote Amperage Control For Welding Power Source With Remote Control Switch
And Output (Contactor) Control
. See welding power source
Owner’s Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Ref. 217264-G / Ref. 801736
0
On
Off
0
On
Off
Example Of Full Remote Amperage Control
Control Setting
Does Not Matter
Set Switch Set Switch
Set Control
Set Switch Set Switch
Combination Front Panel
And
Remote Control
Control
Setting
(150 A)
Unit
Maximum
Press pedal lightly to turn weld
output and gas flow on. Press
pedal further to increase weld
output. Release pedal to turn
off weld output and gas flow.
Press pedal lightly to turn weld
output and gas flow on. Press
pedal further to increase weld
output. Release pedal to turn
off weld output and gas flow.
Example Of Combination Front Panel
And Remote Amperage Control
. See welding power source
Owner’s Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
OM-844 Page 5
1-8. Adjusting Potentiometer Timing
NOTICE Disconnect foot control
from welding power source/gener-
ator before adjusting potentiome-
ter.
Turn unit upside down, and remove
bottom plate.
1. Label
2. Gear
Turn gear on potentiometer shaft
counterclockwise as far as
possible.
Pull drive belt tight and mesh belt
teeth with gear teeth.
Connect free end of small spring
into end of drive belt.
Reinstall bottom plate
BEFORERE-INSTALLINGBELT,TURNGEARALL
THEWAYTOTHESTOP.
ANTESDEVOLVERAINSTALARLACORREADÉ
VUELTAALENGRANAJETODOLONECESARIO
HASTAQUESEDETENGA.
AVANTDEREPOSERLACOURROIE,FAIRE
PIVOTERL'AXEJUSQU'ÀLABUTÉE.
218006-A
1
2
1-9. Changing Cord Location On RFCS-5HD, RFCS6MHD, And RFCS-14HD Models
NOTICE Disconnect foot control
from welding power source/gener-
ator before adjusting potentiome-
ter.
1. Bottom Plate
Turn unit upside down, and remove
bottom plate.
Remove screw that holds cord in its
factory installed location.
2. Cord Slots
Position cord in desired slot.
Slide strain relief down cord and
into slot to protect cord. Secure
cord with screw in the same man-
ner in which it came from the
factory.
Reinstall bottom plate
1
2
OM-844 Page 6
SECTION 2 ELECTRICAL DIAGRAMS
183957-B
Circuit Diagram For RFCS-5, RFCS-5HD, RFCS-14, And RFCS-14HD Models
Circuit Diagram For RFCS-6M Models
208615-B
OM-844 Page 7
SECTION 3 PARTS LIST
801735-B
1
2
5
6
3
2
7
2
4
2
Quantity
Description
Part
No.
Dia.
Mkgs.
Item
No.
14 14HD
RFCS Models
6M5HD5
1 182030 Belt 1 1 1 1 1... .............. .. ................................ ...... ..... ..... .....
2 279685 Pedal / Housing / Bottom Plate w/Spring 1 1 1 1 1... .............. .. ...... ..... ..... .....
3 198036 Bottom Plate 1 1... .............. .. ................................ ....................
4 182627 Spring 1 1 1 1 1... .............. .. .............................. ...... ..... ..... .....
5 S1 183629 Switch, limit 10A 125/250V 1 1 1 1 1... ..... ..... .. ............ ...... ..... ..... .....
6 279681 Cable, Control 20Ft-3In. 1 1... .............. .. .............. ......
6 279682 Cable, Control 13Ft-3In. 1... .............. .. .............................
6 279683 Cable, Control 20Ft-3In. 1... .............. .. .............................
6 279684 Cable, Control 20Ft-3In. 1 1... .............. .. .................................... .....
7 R1 264050 Potentiometer, w/Leads 1 1 1 1 1... ..... ..... .. ............... ...... ..... ..... .....
To maintain the factory original performance of your equipment, use only Manufacturers Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
Notes
Notes
16 Gauge (.063 in)
22 Gauge (.031 in)
24 Gauge (.025 in)
20 Gauge (.037 in)
18 Gauge (.050 in)
14 Gauge (.078 in)
1/8 in (.125 in)
3/16 in (.188 in)
1/4 in (.25 in)
5/16 in (.313 in)
3/8 in (.375 in)
1/2 in (.5 in)
MATERIAL THICKNESS REFERENCE CHART
Notes
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
Effective January 1, 2020
(Equipment with a serial number preface of NA or newer)
This limited warranty supersedes all previous Miller warranties and is exclusive with no other
guarantees or warranties expressed or implied.
LIMITED WARRANTY Subject to the terms and conditions
below, Miller Electric Mfg. LLC, Appleton, Wisconsin, warrants to
authorized distributors that new Miller equipment sold after the
effective date of this limited warranty is free of defects in material
and workmanship at the time it is shipped by Miller. THIS
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS.
Within the warranty periods listed below, Miller will repair or replace
any warranted parts or components that fail due to such defects in
material or workmanship. Miller must be notified in writing within
thirty (30) days of such defect or failure, at which time Miller will
provide instructions on the warranty claim procedures to be
followed. Notifications submitted as online warranty claims must
provide detailed descriptions of the fault and troubleshooting steps
taken to diagnose failed parts. Warranty claims that lack the
required information as defined in the Miller Service Operation
Guide (SOG) may be denied by Miller.
Miller shall honor warranty claims on warranted equipment listed
below in the event of a defect within the warranty coverage time
periods listed below. Warranty time periods start on the delivery
date of the equipment to the end-user purchaser, or 12 months
after the equipment is shipped to a North American distributor, or
18 months after the equipment is shipped to an international
distributor, whichever occurs first.
1. 5 Years Parts — 3 Years Labor
* Original Main Power Rectifiers Only to Include SCRs,
Diodes, and Discrete Rectifier Modules
2. 3 Years — Parts and Labor Unless Specified
* Auto-Darkening Helmet Lenses (No Labor) (See
Classic Series Exception Below)
* Engine Driven W
elder/Generators
(NOTE: Engines are Warranted Separately by the
Engine Manufacturer.)
* Insight Welding Intelligence Products (Except External
Sensors)
* Inverter Power Sources
* Plasma Arc Cutting Power Sources
* Process Controllers
* Semi-Automatic and Automatic Wire Feeders
* Transformer/Rectifier Power Sources
3. 2 Years — Parts and Labor
* Auto-Darkening Helmet Lenses Classic Series Only
(No Labor)
* Auto-Darkening Weld Masks (No Labor)
* Fume Extractors Capture 5, Filtair 400 and Industrial
Collector Series
4. 1 Year — Parts and Labor Unless Specified
* ArcReach Heater
* AugmentedArc and LiveArc Welding Systems
* Automatic Motion Devices
* Bernard BTB Air-Cooled MIG Guns (No Labor)
* CoolBelt (No Labor)
* Desiccant Air Dryer System
* Field Options
(NOTE: Field options are covered for the remaining
warranty period of the product they are installed in,
or for a minimum of one year — whichever is
greater.)
* RFCS Foot Controls (Except RFCS-RJ45)
* Fume Extractors Filtair 130, MWX and SWX Series,
ZoneFlow Extraction Arms and Motor Control Box
* HF Units
* ICE/XT Plasma Cutting Torches (No Labor)
* Induction Heating Power Sources, Coolers
(NOTE: Digital Recorders are Warranted
Separately by the Manufacturer.)
* Load Banks
* Motor-Driven Guns (except Spoolmate Spoolguns)
* PAPR Blower Unit (No Labor)
* Positioners and Controllers
* Racks (For Housing Multiple Power Sources)
* Running Gear/Trailers
* Subarc Wire Drive Assemblies
* Supplied Air Respirator (SAR) Boxes and Panels
* TIG Torches (No Labor)
* Tregaskiss Guns (No Labor)
* Water Cooling Systems
* Wireless Remote Foot/Hand Controls and Receivers
* Work Stations/Weld Tables (No Labor)
5. 6 Months — Parts
* Batteries
6. 90 Days — Parts
* Accessories (Kits)
* ArcReach Heater Quick Wrap and Air Cooled Cables
* Canvas Covers
* Induction Heating Coils and Blankets, Cables, and
Non-Electronic Controls
* MDX Series MIG Guns
* M-Guns
* MIG Guns, Subarc (SAW) Torches, and External
Cladding Heads
* Remote Controls and RFCS-RJ45
* Replacement Parts (No labor)
* Spoolmate Spoolguns
Miller’s True Blue® Limited Warranty shall not apply to:
1. Consumable components; such as contact tips,
cutting nozzles, contactors, brushes, relays, work
station table tops and welding curtains, or parts that
fail due to normal wear. (Exception: brushes and
relays are covered on all engine-driven products.)
2. Items furnished by Miller, but manufactured by others,
such as engines or trade accessories. These items are
covered by the manufacturers warranty, if any.
3. Equipment that has been modified by any party other than
Miller, or equipment that has been improperly installed,
improperly operated or misused based upon industry
standards, or equipment which has not had reasonable
and necessary maintenance, or equipment which has
been used for operation outside of the specifications for
the equipment.
4. Defects caused by accident, unauthorized repair, or
improper testing.
MILLER PRODUCTS ARE INTENDED FOR COMMERCIAL
AND INDUSTRIAL USERS TRAINED AND EXPERIENCED IN
THE USE AND MAINTENANCE OF WELDING EQUIPMENT.
The exclusive remedies for warranty claims are, at Miller’s
option, either: (1) repair; or (2) replacement; or, if approved in
writing by Miller, (3) the pre-approved cost of repair or
replacement at an authorized Miller service station; or (4)
payment of or credit for the purchase price (less reasonable
depreciation based upon use). Products may not be returned
without Miller’s written approval. Return shipment shall be at
customer’s risk and expense.
The above remedies are F.O.B. Appleton, WI, or Millers
authorized service facility. Transportation and freight are the
customer’s responsibility. TO THE EXTENT PERMITTED BY
LAW, THE REMEDIES HEREIN ARE THE SOLE AND
EXCLUSIVE REMEDIES REGARDLESS OF THE LEGAL
THEORY. IN NO EVENT SHALL MILLER BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF
PROFIT) REGARDLESS OF THE LEGAL THEORY. ANY
WARRANTY NOT PROVIDED HEREIN AND ANY IMPLIED
WARRANTY, GUARANTY, OR REPRESENTATION,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE, ARE EXCLUDED AND DISCLAIMED BY
MILLER.
Some US states do not allow limiting the duration of an implied
warranty or the exclusion of certain damages, so the above
limitations may not apply to you. This warranty provides
specific legal rights, and other rights may be available
depending on your state. In Canada, some provinces provide
additional warranties or remedies, and to the extent the law
prohibits their waiver, the limitations set out above may not
apply. This Limited Warranty provides specific legal rights, and
other rights may be available, but may vary by province.
Warranty Questions?
Call
1-800-4-A-MILLER
for your local
Miller distributor.
Your distributor also gives
you ...
Service
You always get the fast,
reliable response you
need. Most replacement
parts can be in your
hands in 24 hours.
Support
Need fast answers to the
tough welding questions?
Contact your distributor.
The expertise of the
distributor and Miller is
there to help you, every
step of the way.
mil dom warr 2020-01
ORIGINAL INSTRUCTIONS PRINTED IN USA © 2020 Miller Electric Mfg. LLC 202001
Miller Electric Mfg. LLC
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
International HeadquartersUSA
USA Phone: 920-735-4505 Auto-Attended
USA & Canada FAX: 920-735-4134
International FAX: 920-735-4125
For International Locations Visit
www.MillerWelds.com
Model Name Serial/Style Number
Purchase Date (Date which equipment was delivered to original customer.)
Distributor
Address
City
State Zip
Please complete and retain with your personal records.
Always provide Model Name and Serial/Style Number.
Contact a DISTRIBUTOR or SERVICE AGENCY near you.
Welding Supplies and Consumables
Options and Accessories
Personal Protective Equipment (PPE)
Service and Repair
Replacement Parts
Training (Schools, Videos, Books)
Welding Process Handbooks
Contact the Delivering Carrier to:
For Service
Owner’s Record
File a claim for loss or damage during
shipment.
For assistance in filing or settling claims, contact
your distributor and/or equipment manufacturer’s
Transportation Department.
Contact your Distributor for:
To locate a Distributor or Service Agency visit
www.millerwelds.com or call 1-800-4-A-Miller
Register your product at www.millerwelds.com/support/
productregistration
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Miller RFCS-14 Le manuel du propriétaire

Catégorie
Système de soudage
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues