TECHNICAL FILE
R03.001_01/07/2016
Novonivel® Access Slimm
Materials
Aluminium
Page 1 of 2
Transition prole designed to solve differences of level in low
thickness oorings, ceramic or vinil oorings, carpets, etc The
prole has a wide face side in smoothed curve with small grooves
that favor the slip resistance. It is delivered with countersunk holes
to improve the xing by using screws (not included). To be installed
after work.
Material: Anodized aluminum
Lenght: 2,5 lm
Dimensions: h: 10 mm / h: 12 mm
a: 50 mm / a: 80 mm
Finishes: Matt silver
General Features
Applications
Novonivel® Access is a ramp prole to avoid discontinuities between different oorings. This prole is
reinforced on the rear, so is able to support trafc of loads. To be installed with screws to improve the
xing.
This prole is perfect for rehabilitation or reform works as it is to be installed after nishing the work.
Alloy:
6063 (AA y ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness: Excellent
Appearance and color: EN 12373-1
Technical Features
Novonivel® Access is a prole made by extrusion of aluminium. These proles have been anodized,
improving mainly by this process their corrosion and mechanical resistance and their appearance.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
TECHNICAL FILE
R03.001_01/07/2016
Technical information
You can nd out more information about the technical features of the Emac®’s products by downloa-
ding its Technical Files in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novonivel® Access Slimm
Cleaning and maintenance
Indoors Floorings Recyclable
Page 2 of 2
Outdoors
Novonivel® Access Slimm is easy to install once the work is nished.
1. Clean the surface to install Novonivel® Access Slimm
2. Place the prole into the desired location
3. Pre-drill the position of the holes for the xing screws
4. Remove the prole and drill the holes
5. Place again the prole and install it with the xing screws (not supplied)
Installation
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
-
1
-
2
