NAPOLEON NEFL100CHD-1 Manuel utilisateur

NAPOLEON
Marque
NAPOLEON
Modèle
NEFL100CHD-1
Catégorie
Cheminées
Taper
Manuel utilisateur
FRENCH PG. 35
W415-2841 / F / 05.10.22
ADD MANUAL TITLE
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone 1 (866) 820-8686 • www.napoleon.com • [email protected]
CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:
CSA 22.2 NO. 46 / UL 1278
INSTALLER:
Leave this manual with the appliance
CONSUMER:
Retain this manual for future reference
Product Name / Code
(MUST use title from Price Book)
(IF MULTIPLE, _____ ILLUSTRATED)
MULTIPLE PRODUCT CODES (LEAVE BLANK IF N/A)
ADD PRODUCT IMAGE
ADD BUTTON BATTERY WARNING IF APPLICABLE
CSA /
INTERTEK
LOGO
SAFETY INFORMATION
- Do not store or use gasoline or other
fl ammable vapors and liquids in the vicinity of
this or any other appliance.
FIRE OR EXPLOSION HAZARD
If the information in these instructions are
not followed exactly, a fi re or explosion may
result causing property damage, personal
injury, or loss of life.
WARNING
!
ENGLISH
$10.00
FOR INDOOR USE ONLY
IF INSTALLATION + OPERATION, ADD SERIAL
NUMBER LABEL HERE
IF SEPARATE MANUALS, ADD “PLACE
BARCODE LABEL ON THE OWNER’S MANUAL”
Alluravision™ Series
NEFL42CHD-1 / NEFL50CHD-1 / NEFL60CHD-1 / NEFL74CHD-1 / NEFL100CHD-1
NEFL42CHS-1 / NEFL50CHS-1 / NEFL60CHS-1 / NEFL74CHS-1
INSTALLATION AND
OPERATION MANUAL
2021
TITLE: LABEL, BATTERY WARNING PART #: W385-2221
REVISION: DATE:06.06.17_X.L.
MAX SIZE: 9" X 3"
MATERIAL: CLASS IIIA-2 PERMANENT LEXAN ADHESIVE LABEL, MINIMUM THICKNESS 0.1MM
LETTERING: BLACK LETTERING ON WHITE BACKGROUND. FONT SIZE TO BE MIN. 8 POINT ARIAL (2mm),
BOLD FACE AND UPPER CASE.
TEMPERATURE RATING MINIMUM 79°C (175°F) RATING
WARNING! AVERTISSEMENT!
WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN
- SWALLOWING MAY LEAD TO SERIOUS INJURY IN AS LITTLE AS 2 HOURS
OR DEATH, DUE TO CHEMICAL BURNS AND POTENTIAL PERFORATION OF
THE OESOPHAGUS.
- IF YOU SUSPECT YOUR CHILD HAS SWALLOWED OR INSERTED A
BUTTON BATTERY, IMMEDIATELY SEEK URGENT MEDICAL ASSISTANCE.
- EXAMINE DEVICES AND MAKE SURE THE BATTERY COMPARTMENT IS
CORRECTLY SECURED, E.G. THAT THE SCREW OR OTHER MECHANICAL
FASTENER IS TIGHTENED. DO NOT USE IF COMPARTMENT IS NOT
SECURE.
- DISPOSE OF USED BUTTON BATTERIES IMMEDIATELY AND SAFELY. FLAT
BATTERIES CAN STILL BE DANGEROUS.
- TELL OTHERS ABOUT THE RISK ASSOCIATED WITH BUTTON BATTERIES
AND HOW TO KEEP THEIR CHILDREN SAFE.
AVERTISSEMENT - GARDER LES BATTERIES DE LA PORTÉE DES
ENFANTS
- L'INGESTION PEUT ENTRAÎNER DES BLESSURES GRAVES DANS MOINS DE 2
HEURES OU LA MORT, EN RAISON DES BRÛLURES CHIMIQUES ET DE LA PERFO-
RATION POTENTIELLE DE L'ŒSOPHAGE.
- SI VOUS PENSEZ QUE VOTRE ENFANT A AVALÉ OU INSÉRÉ UNE BATTERIE
BOUTON, CONSULTEZ IMMÉDIATEMENT UNE ASSISTANCE MÉDICALE URGENTE.
- EXAMINEZ LES APPAREILS ET ASSUREZ-VOUS QUE LE COMPARTIMENT DE LA
BATTERIE EST BIEN FIXÉ, PAR EX. QUE LA VIS OU AUTRE ATTACHE MÉCANIQUE
EST SERRÉE. NE PAS UTILISER SI LE COMPARTIMENT N'EST PAS SÉCURISÉ.
- ÉLIMINER LES PILES BOUTON UTILISÉES IMMÉDIATEMENT ET EN TOUTE
SÉCURITÉ. LES PILES PLATES PEUVENT ENCORE ÊTRE DANGEREUSES.
- RENSEIGNEZ-VOUS SUR LE RISQUE ASSOCIÉ AUX BATTERIES À BOUTON ET LA
FAÇON DE GARDER LEURS ENFANTS EN SÉCURITÉ.
W385-2221
This appliance has a remote that requires button
batteries that are hazardous to young children.
(NEFL50CHD-1 llustrated)
SERIENNUMMER VOM KARTON AUFBRINGEN
Seriennr.
MODELL-NR.
BRENG HET SERIENUMMER VAN DE DOOS AAN
Serienr.
MODELNR.
NANESTE SÉRIOVÉ ČÍSLO Z KARTONU
Sériové číslo:
ČÍSLO MODELU:
W415-2841 / F / 05.10.22
EN
2
safety information
• If equipped with a heater, this appliance can be hot when operated and can cause severe
burns if contacted.
• Do not operate appliance before reading and understanding operating instructions. Failure to operate
appliance according to operating instructions could cause fi re or injury.
• Do not install damaged, incomplete or substitute components.
• Do not burn wood or other materials in this appliance.
• All electric appliances have hot and arcing or sparking parts inside. Do not use it in areas where a gas
line, paint or fl ammable liquids are present.
• Any safety screen or guard removed for servicing must be replaced prior to operating the appliance.
• It is imperative that the control compartments, circulating blower and its passageway in the appliance
are kept clean. The appliance should be inspected before use and at least annually by a qualifi ed service
person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material,
etc. The appliance area must be kept clear and free from combustible materials, gasoline and other
fl ammable vapors and liquids.
• Under no circumstances should this appliance be modifi ed.
• Do not use this appliance if any part has been under water. Immediately call a qualifi ed service technician to
inspect the appliance and to replace any part of the control system which has been under water.
• If equipped with a glass door, do not operate the appliance with the glass door removed, cracked or
broken. Replacement of the glass should be done by a licensed or qualifi ed service person. Do not strike
or slam shut the appliance glass door.
• Keep the packaging material out of reach of children and dispose of the material in a safe manner. As
with all plastic bags, these are not toys and should be kept away from children and infants.
• Servicing should be done only while the appliance is disconnected from the power supply circuit.
• Always unplug appliance when not in use.
• Do not operate this appliance with a damaged cord or plug after the appliance malfunctions, has been
dropped or damaged in any manner. Return appliance to authorized service facility for examination,
electrical or mechanical adjustment, or repair.
• Do not use outdoors.
• When installing this appliance in a room where water is present, the installation must comply with codes
recognizing the increased hazard of electrical shock and electrocution.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord
away from traffi c area and where it will not be tripped over.
• Connect to properly grounded outlets only.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock or fi re, or damage the appliance.
• It is normal for your electric appliance to produce noise, especially when installed in a quiet space such
!
WARNING
!
WARNING
Insert appropriate “Bathroom Warning (Electric)” (see 3-Warnings template folder).
note:
This appliance is NOT suitable for installation in a bathroom.
note:
This appliance IS suitable for installation in a bathroom.
SUITABLE for bathroom installation:
NOT SUITABLE for bathroom installation:
note:
Cet appareil NE PEUT PAS être installé dans une salle de bain.
note:
Cet appareil PEUT être installé dans une salle de bain.
nota:
Esta artefacto NO ES adecuada para ser instalado en un baño.
nota:
Esta artefacto ES adecuada para ser instalado en un baño.
EN
W415-2841 / F / 05.10.22 3
safety information
• To prevent a possible fi re, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like
a carpet, where openings may become blocked.
• Always plug appliances directly into a wall outlet/receptacle. Never use an extension cord or relocatable
power tap (outlet/power strip).
• These appliances are tested and listed for use only with the optional accessories listed in these instructions.
Use of optional accessories not specifi cally tested for this appliance could void the warranty and/or result in
a safety hazard.
For appliances equipped with a heater:
• Risk of burns. Power to the appliance should be turned off and the appliance allowed to cool before
servicing. To disconnect power to the appliance, turn controls to off, then remove plug from outlet.
• Young children should be carefully supervised when they are in the same room as the appliance.
Toddlers, young children and others may be susceptible to accidental contact burns. A physical barrier is
recommended if there are at risk individuals in the house. To restrict access to an appliance or stove, install
an adjustable safety gate to keep toddlers, young children and other at risk individuals out of the room and
away from hot surfaces.
• Clothing or other fl ammable material should not be placed on or near the appliance.
• Due to high temperatures, the appliance should be located out of traffi c and away from furniture and
draperies.
• Ensure you have incorporated adequate safety measure to protect infants/toddlers from touching hot
surfaces.
• Even after the appliance is off, the glass and/or screen will remain hot for an extended period of time.
• Check with your local hearth specialty dealer for safety screens and hearth guards to protect children from
hot surfaces. These screens and guards must be fastened to the fl oor.
• Ensure clearances to combustibles are maintained when building a mantel or shelves above the appliance.
Elevated temperatures on the wall or in the air above the appliance can cause melting, discolouration or
damage to decorations, a TV or other electronic components.
!
WARNING
!
WARNING
!
WARNING:
Electric
This product can expose you to chemicals including lead and lead
Gas, Wood
Mantels (including Firebox)
Accessories / Metal
Accessories / Brick
Accessories / Powder Coat
Fibre
compounds, which are known to the State of California to cause cancer, and chemicals includ-
ing BBP and DEHP, which are known to the State of California to cause birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
!
AVERTISSEMENT:
Ce produit peut vous exposer à des substances chimiques incluant le
plomb et les composés de plomb qui, selon l’État de Californie, causeraient le cancer, et des
substances chimiques incluant le BBP et DEHP qui, selon d’État de Californie, causeraient des
malformations congénitales ou autres dangers pour la reproduction.
Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.
!
WARNING:
This product can expose you to chemicals including lead and lead compounds,
which are known to the State of California to cause cancer, and chemicals including carbon
monoxide, which are known to the State of California to cause birth defects or other reproduc-
tive harm. For more information, go to www.P65Warnings.ca.gov.
!
AVERTISSEMENT:
Ce produit peut vous exposer à des substances chimiques incluant le
plomb et les composés de plomb qui, selon l’État de Californie, causeraient le cancer, et des
substances chimiques incluant le monoxyde de carbone qui, selon d’État de Californie, cause-
raient des malformations congénitales ou autres dangers pour la reproduction.
Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.
!
WARNING:
This product can expose you to chemicals including wood dust, which are
known to the State of California to cause cancer, and chemicals including BBP and DEHP,
which are known to the State of California to cause birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
!
AVERTISSEMENT:
Ce produit peut vous exposer à des substances chimiques incluant le
poussière de bois qui, selon l’État de Californie, causeraient le cancer, et des substances
chimiques incluant le BBP et DEHP qui, selon d’État de Californie, causeraient des malforma-
tions congénitales ou autres dangers pour la reproduction.
Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.
!
WARNING:
This product can expose you to chemicals including chromium, which are
known to the State of California to cause cancer, and chemicals including toluene, which are
known to the State of California to cause birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
!
AVERTISSEMENT:
Ce produit peut vous exposer à des substances chimiques incluant le
chrome qui, selon l’État de Californie, causeraient le cancer, et des substances chimiques
incluant le toluène qui, selon d’État de Californie, causeraient des malformations congénitales
ou autres dangers pour la reproduction.
Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.
!
WARNING:
This product can expose you to chemicals including silica, which are
known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.
!
AVERTISSEMENT:
Ce produit peut vous exposer à des substances chimiques incluant le
silice qui, selon l’État de Californie, causeraient le cancer.
Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.
!
WARNING:
This product can expose you to chemicals including titanium dioxide, which
are known to the State of California to cause cancer, and chemicals including toluene, which
are known to the State of California to cause birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
!
AVERTISSEMENT:
Ce produit peut vous exposer à des substances chimiques incluant le
dioxyde de titane qui, selon l’État de Californie, causeraient le cancer, et des substances
chimiques incluant le toluène qui, selon d’État de Californie, causeraient des malformations
congénitales ou autres dangers pour la reproduction.
Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.
!
WARNING:
This product can expose you to chemicals including silica, which are known to
the State of California to cause cancer, and chemicals including toluene, which are known to
the State of California to cause birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
!
AVERTISSEMENT:
silice qui, selon l’État de Californie, causeraient le cancer, et des substances chimiques
incluant le toluène qui, selon d’État de Californie, causeraient des malformations congénitales
ou autres dangers pour la reproduction.
Pour de plus amples renseignements, visitez le www.P65Warnings.ca.gov.
Ce produit peut vous exposer à des substances chimiques incluant le
!
ADVERTENCIA:
Este producto puede exponerlo a productos químicos, entre ellos, plomo
y compuestos con plomo, que el Estado de California reconoce como causantes de cáncer, y
productos químicos, entre ellos, bencilbutilftalato (BBP, por sus siglas en inglés) y di(2-etilhex-
il) ftalato (DEHP, por sus siglas en inglés), que el Estado de California reconoce como caus-
antes de malformaciones congénitas u otros daños para la reproducción. Para obtener más
información, visite www.P65Warnings.ca.gov.
!
ADVERTENCIA:
Este producto puede exponerlo a productos químicos, entre ellos, polvo
de madera, que el Estado de California reconoce como causantes de cáncer, y productos
químicos, entre ellos, bencilbutilftalato (BBP, por sus siglas en inglés) y di(2-etilhexil) ftalato
(DEHP, por sus siglas en inglés), que el Estado de California reconoce como causantes de
malformaciones congénitas u otros daños para la reproducción. Para obtener más infor-
mación, visite www.P65Warnings.ca.gov.
W415-2841 / F / 05.10.22
EN
4
table of contents
1.0 general information 5
1.1 dimensions 5
1.2 listing approvals 6
1.3 general instructions 6
1.4 rating plate information 7
1.5 hardware list 7
1.6 label location 8
1.7 unpacking and testing the appliance 9
1.8 grounding the appliance 9
2.0 installation 10
2.1 minimum clearance to combustibles 10
2.2 minimum mantel clearances 10
2.3 wall mount installation 11
2.3.1 side panel installation (optional, wall mount installation only) 12
2.4 recessed installation 13
2.4.1 framing 13
2.4.2 recessed installation instructions 14
2.4.3 trim installation (optional) 15
2.5 installing the appliance into a mantel 16
3.0 electrical information 17
3.1 120V hardwiring installation (NEFL42/50/60/74CHS-1 only) 17
3.2 120V hardwiring installation (NEFL42/50/60/74/100CHD-1 only) 18
3.3 240V hard wiring installation (NEFL42/50/60/74/100CHD-1 only) 19
4.0 finishing 20
4.1 crystal ember installation 20
4.2 optional topaz glass chips and driftwood log installation (NEFL42/50/60/74/100CHD-1 only) 20
4.3 front glass installation and removal 21
5.0 wiring diagram 22
5.1 NEFL42/50/60/74CHS-1 wiring diagram 22
5.2 NEFL42/50/60/74/100CHD-1 wiring diagram 23
6.0 operation 24
6.1 operating control panel 24
6.2 operating remote control 25
7.0 maintenance 26
7.1 cleaning 26
7.2 remote battery installation 27
8.0 replacement parts 28
8.1 NEFL42/50/60/74CHS-1 29
8.2 NEFL42/50/60/74/100CHD-1 30
9.0 troubleshooting 31
10.0 warranty 33
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial, are denoted by a vertical line in the margin.
note:
EN
W415-2841 / F / 05.10.22 5
dimensions
1.0 general information
A
17 5/16”
(440mm)
D
VIEWING AREA
B
NOTE: MODEL SHOWN IS NEFL32CHS
C
CORD LOCATION
CORD LOCATION
FRONT VIEW RIGHT SIDE VIEW TOP VIEW
15 7/8”
(402mm)
11 1/16”
(281mm)
3/4”
(18mm)
Dimensions
Model No. A B C D
NEFL42CHS-1 44 7/16”
(1128mm)
4 1/4”
(108mm)
42 1/16”
(1068mm)
40 1/4”
(1022mm)
NEFL50CHS-1 52 11/16”
(1338mm)
50 5/16”
(1278mm)
48 1/2”
(1232mm)
NEFL60CHS-1 62 9/16”
(1588mm)
60 3/16”
(1528mm)
58 5/16”
(1482mm)
NEFL74CHS-1 76 3/4”
(1948mm)
74 5/16”
(1888mm)
72 1/2”
(1842mm)
NEFL42CHD-1 44 7/16”
(1128mm)
5 13/16”
(148mm)
42 1/16”
(1068mm)
40 1/4”
(1022mm)
NEFL50CHD-1 52 11/16”
(1338mm)
50 5/16”
(1278mm)
48 1/2”
(1232mm)
NEFL60CHD-1 62 9/16”
(1588mm)
60 3/16”
(1528mm)
58 5/16”
(1482mm)
NEFL74CHD-1 76 3/4”
(1948mm)
74 5/16”
(1888mm)
72 1/2”
(1842mm)
NEFL100CHD-1 102 11/16”
(2608mm)
100 5/16”
(2548mm)
98 1/2”
(2502mm)
A
17 5/16”
(440mm)
D
VIEWING AREA
B
NOTE: MODEL SHOWN IS NEFL32CHS
C
CORD LOCATION
CORD LOCATION
FRONT VIEW RIGHT SIDE VIEW TOP VIEW
15 7/8”
(402mm)
11 1/16”
(281mm)
3/4”
(18mm)
front view side view
top view
1.1 dimensions
A
17 5/16”
(440mm)
D
VIEWING AREA
B
NOTE: MODEL SHOWN IS NEFL32CHS
C
CORD LOCATION
CORD LOCATION
FRONT VIEW RIGHT SIDE VIEW TOP VIEW
15 7/8”
(402mm)
11 1/16”
(281mm)
3/4”
(18mm)
W415-2841 / F / 05.10.22
EN
6
general information
This appliance has been tested in accordance with the CSA Standards for fixed and location-dedicated electric
room appliances in the United States and Canada. If you need assistance during installation, please contact your
local dealer.
*Not applicable to NEFL42/50/60/74CHS-1
note:
This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of
local codes, with the latest edition of the National Electrical Code ANSI/NFPA 70 in the United States or the
Canadian Electrical Code, CSA C22.1 in Canada.
1.2 listing approvals
1.3 general instructions
4.6A
• Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet
are on.
•
The appliance may emit a slight, harmless odour when fi rst used. This odour is normal and it is caused by
the initial heating of internal appliance elements and will not occur again.
• If your appliance does not emit heat when called for, consult the “operation” section of this manual for further
information.
•
Use with a CSA or UL certifi ed surge protector.
•
Do not route the power cord directly underneath the appliance.
This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured
homes when installed according to these instructions.
Model No. Net Weight Gross Weight
NEFL42CHD-1 63.3 lbs (28.7kg) 82.7 lbs (37.5kg)
NEFL50CHD-1 71.7 lbs (32.5kg) 94.8 lbs (43kg)
NEFL60CHD-1 82.7 lbs (37.5kg) 109.1 lbs (49.5kg)
NEFL74CHD-1 99.6 lbs (45.2kg) 130 lbs (59kg)
NEFL100CHD-1 130 lbs (59kg) 167.6 lbs (76kg)
NEFL42CHS-1 46.7 lbs (21.2kg) 62.4 lbs (28.3kg)
NEFL50CHS-1 54.5 lbs (24.7kg) 73 lbs (33.1kg)
NEFL60CHS-1 63.3 lbs (28.7kg) 84.2 lbs (38.2kg)
NEFL74CHS-1 77.2 lbs (35kg) 103.6 lbs (47kg)
Description Electric Appliance
Type 3 Way Mounting Unit
Wall-Mount, Recess into Wall and
Assemble with mantel
Voltage 120V AC / 240V AC *
Watts MAX 1450W / 2800W *
Amps Dedicated 15 AMP Grounded Circuit
This electric appliance meets the contruction and safety standards of H.U.D. for application in manufactured
homes when installed according to these instructions.
As with most electronic devices, your new electric appliance has been designed to operate at temperatures
between 5°C (41°F) and 35°C (95°F). During the colder winter months, allow the appliance to reach room
temperature before turning it on.
EN
W415-2841 / F / 05.10.22 7
general information
The below illustration is for reference only. Refer to the appliance rating plate for accurate information.
The rating plate must remain with the appliance at all times. It must not be removed.
note:
1.5 hardware list
1.4 rating plate information
EFGH
D
AC
B
I
Description Quantity
NEFL42CHS-1
/ NEFL42CHD-1
NEFL50CHS-1
/ NEFL50CHD-1
NEFL60CHS-1
/ NEFL60CHD-1
NEFL74CHS-1
/ NEFL74CHD-1 NEFL100CHD-1
AWood Screws 8 14
BDrywall Anchors 8 14
CST4x12 Metal Screws 25
DJunction Box Cover Plate 1
EStrain Relief 1
FCord Corner 2
GCord Cover Connector 2
HCentre Screw Cover Plate 1
ISide Wall Mounting Bracket 2
W385-2460
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARD: CSA 22.2 NO. 46 AND UL 2021 / HOMOLOGUÉ
SELON LES NORMES NATIONALES CANADIENNES ET AMÉRICAINES: CSA 22.2 NO. 46 UL ET 2021
Page 1 of 1
ELECTRIC FIREPLACE. SUITABLE FOR BEDROOM AND BED-SITTING ROOM INSTALLATION.
SUITABLE FOR MOBILE HOME INSTALLATION.
FOYER À ÉLECTRIQUE. HOMOLOGUÉ POUR
INSTALLATION DANS UNE CHAMBRE À COUCHER, UNE SALLE DE BAIN ET UN STUDIO. APPROPRIÉ POUR
INSTALLATION DANS UNE MAISON MOBILE.
VOLTAGE: 120V AC / 240V AC TENSION: 120V AC / 240V AC
FREQUENCY: 60Hz FRÉQUENCE: 60Hz
POWER: 1450W / 2800W PUISSANCE: 1450W / 2800W
DATE CODE: XXXXX CODE DE DATE:
DESIGNED IN NORTH AMERICA
BY WOLF STEEL LTD.
MADE IN CHINA FABRIQUÉ EN CHINE
WOLF STEEL LTD.
24 NAPOLEON ROAD,
BARRIE, ON, L4M 0G8 CANADA
SERIAL NUMBER/NO. DE SÉRIE: NEFLXXD
MATERIAL: CLASS IIIA-2 PERMANENT LEXAN ADHESIVE LABEL, MINIMUM THICKNESS 0.1MM, NON WATER SOLUBLE ADHESIVE CAPABLE OF WITHSTANDING A
MAXIMUM TEMPERATURE OF 175°F (79°C).
SPECIFICATION: BLACK LETTERING ON SILVER BACKGROUND. MINIMUM FONT SIZE TO BE MINIMUM OF 8.5 PT (3.2mm)
MAX OVERALL SIZE: 6" x 3"
SERIAL NUMBERS TO BE ASCENDING FROM NEFLXXD 2003001 (INSERT APPLIANCE SIZE FOR "XX")
TITLE: RATING PLATE (NEFL42/50/60/74/100CHD-1) DWG#: W385-2460
DATE: 03.16.20_F.L.
MODEL
NEFL60CHD-1
REVISION:
DÉSIGNÉ EN AMÉRIQUE DU NORD
PAR WOLF STEEL LTÉE.
NEFL74CHD-1
NEFL100CHD-1
MASTER CONTRACT: 161746
CONTRAT-CADRE: 161746
NEFL42CHD-1
NEFL50CHD-1
SAMPLE
W415-2841 / F / 05.10.22
EN
8
general information
1.6 label location
Do Not Cover Label
(W385-2210)
Warning Label
(W385-1944)
Caution Label
(W385-1945)
Wiring Diagram Label
(W385-2462 / W385-2463)
Hardwiring Label
(W385-2464 / W385-2465)
Rating Plate Label
(W385-2460 / W385-2461)
Warning Label
(W385-1943)
Power Cord
Hot Surface Label
(W385-2017)
Front Glass Label
(W385-2321)
EN
W415-2841 / F / 05.10.22 9
general information
1.7 unpacking and testing the appliance
1.8 grounding the appliance
• Due to high temperatures, this electric appliance should be located out of traffic. Keep combustible materials
such as furniture, pillows, bedding, papers, clothes and curtains at least 36” (91.4cm) from the front of the
appliance.
• Never locate this electric appliance where it may fall into a bathtub or other water container.
• Wear safety gloves and safety glasses for protection during installation and maintenance.
• To prevent contact with sagging or loose insulation, the electric appliance must not be installed against vapor
barrier or exposed insulation. Localized overheating could occur and a fire could result.
• Do not expose the electric appliance to the elements (such as rain, etc.).
!WARNING
Carefully remove the appliance from the box. Prior to installing the appliance, remove all packaging material and
test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located
120V, 15 Amp minimum grounded outlet.
51.1
Grounding Methods
Metal Screw
(A)
Not allowed in Canada
Grounding Means
Adapter
Grounding Pin
Cover of
grounded
outlet box (C)
(B)
This appliance is for use on 120 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot receptacles, as shown in (B).
The green grounding plug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove plug from outlet.
The appliance is shipped with the front glass not assembled onto the appliance (see “front glass installation
and removal” section for assembly instructions). Front glass must be installed during operation.
note:
This appliance must be connected to a dedicated 15 amp circuit. The use of an extension cord is NOT
permitted.
note:
NEFL42/50/60/74CHS-1 models are for use with 120 volts; NEFL42/50/60/74/100CHD-1 models are for use
with 120 and 240 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available for conecting
three-blade grounding type plugs to two-slot receptables, as shown in (B). The green grounding plug extending
from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter
should not be used if a three-slow grounded receptable is available.
To disconnect appliance, turn controls to OFF, then remove plug from outlet.
W415-2841 / F / 05.10.22
EN
10
installation
2.0 installation
42.5
!
WARNING
• Risk of fi re! The power cord must not be pinched against a sharp edge. Secure cord to avoid tripping or
snagging to reduce the risk of fi re, electric shock, or personal injury. Do not run cord under carpeting. Do not
cover cord with throw rugs, runners, or similar items. Arrange cord away from traffi c areas and where it will not
be tripped over.
• Risk of fi re! To prevent a possible fi re, do not block air intake or exhaust in any manner. Do not use on soft
surfaces where openings may become blocked.
• Risk of fi re! Do not blow or place insulation against the appliance.
• This electric appliance is tested and listed for use only with the approved optional accessories. Use of optional
accessories not specifi cally tested for this electric appliance could void the warranty and/or result in a safety
hazard.
• If the information in these instructions is not followed exactly, a fi re or explosion may result causing property
damage, personal injury, or death. Do not store or use gasoline or other fl ammable vapors in the vicinity of this
or any other appliance.
• This appliance is heavy. It is highly recommended that two people install this appliance.
• If your appliance is equipped with a heater, ensure the heater vents cannot, in any way, be covered as it may
create a fi re hazard.
• Do not run the power cord horizontally, directly below the appliance.
Follow all national and local electrical codes.
note:
Your appliance is a wall-mounted, recessed and/or mantel installed appliance. Select a suitable location that is not
susceptible to moisture and is away from drapes, furniture and high traffic areas.
2.1 minimum clearance to combustibles
2.2 minimum mantel clearances
• When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
!WARNING
Side View (Wall Mount)
8" (203mm)
Mantel
Floor
Wall
Side View (recessed into a wall)
8" (203mm)
0"
0"
0"
Mantel
Floor
Measurements are taken from the top of the appliance:
Bottom, Sides, and Back 0”
Top 0” recessed into wall and 8” (203mm) to mantel
EN
W415-2841 / F / 05.10.22 11
installation
5. With the wall mounting bracket installed, have 2 people lift the appliance up and insert the 4 bracket hooks (2
hooks per bracket) into the 2 slots on the back of the appliance.
6. Check the appliance for stability, ensuring that the bracket will not pull free from the wall.
2.3 wall mount installation
Due to the many different materials used on different walls, it is highly recommended that you consult your local
builder before you install this appliance on the wall.
1. Select a location that is not prone to moisture and is located at least 36” (91.4cm) away from combustible
materials such as curtain drapes, furniture, bedding, paper, etc.
2. Have 2 people hold the appliance against the wall to determine the final location.
3. Place appliance face down on a soft, non-abrasive surface. Remove the bracket from the back of the
appliance by removing the screws (Fig. 2-1). Set the screws aside.
The mounting bracket must be screwed into the wall studs with at least 2 screws. If the remaining screws
cannot be screwed into a stud, ensure that plastic anchors (provided) are used to affix the bracket to the wall
and that the bracket is adequately secured.
note:
HOOK
SCREWS
HOOK
Fig. 2-1
4. Mark out location, then mount the bracket(s) onto the wall using screws (supplied). This bracket must have
the hooks facing upward and be level.
Wall Brackets
A x 6 for NEFL42/50CHS/D-1
A x 12 for NEFL60/74CHS/D-1 & NEFL100CHD-1
B x 6 for NEFL42/50CHS/D-1
B x 12 for NEFL60/74CHS/D-1 & NEFL100CHD-1
W415-2841 / F / 05.10.22
EN
12
installation
1. Install left and right panels (Fig. 2-3) by securing 4 screws (2 per panel) to bottom of appliance (Fig. 2-4).
Fig. 2-3
Fig. 2-4
7. Install 2 screws through the side wall mounting brackets (supplied) to secure the appliance to the wall (Fig.
2-2). Repeat on the opposite side.
8. Install side panels (see “side panel installation” section).
9. Place the crystals or optional topaz glass chips and driftwood logs (CHD-1 models only) along the media tray
(see “crystal ember installation” and “optional topaz glass chips and driftwood log installation” sections).
10. Install front glass (see “front glass installation and removal” section).
Fig. 2-2
For NEFL42/50CHS/D-1 models, there is only 1 wall bracket attached to the back of the appliance.
note:
Side Wall Mounting Bracket
Wood Screw (A x 1 each side)
Metal Screws (C x 2 each side)
2.3.1 side panel installation (optional, wall mount installation only)
EN
W415-2841 / F / 05.10.22 13
installation
2.4 recessed installation
2.4.1 framing
6 1/16"
152mm
4 1/2"
89mm
MIN MAX
JUNCTION BOX
A
B
A
B
FINISHING MATERIAL
(NON-LOAD
BEARING)
Model No. A B
NEFL42CHS-1
16 1/8”
(410mm)
42 9/16”
(1081mm)
NEFL50CHS-1 50 13/16”
(1291mm)
NEFL60CHS-1 60 11/16”
(1541mm)
NEFL74CHS-1 74 13/16”
(1900mm)
Measurements from body of appliance:
Sides, Back, Top 0”
Model No. A B
NEFL42CHD-1
16 1/8”
(410mm)
42 9/16”
(1081mm)
NEFL50CHD-1 50 13/16”
(1291mm)
NEFL60CHD-1 60 11/16”
(1541mm)
NEFL74CHD-1 74 13/16”
(1900mm)
NEFL100CHD-1 100 13/16”
(2561mm)
4 1/2”
[89mm]
minimum for CHS-1
models
6 1/16”
[152mm]
minimum for CHD-1
models
W415-2841 / F / 05.10.22
EN
14
installation
Due to the many different materials used on different walls, it is highly recommended that you consult your local
builder before you install this appliance on the wall.
Select a location that is not prone to moisture and is located at least 36” (91.4cm) away from combustible
materials such curtain drapes, furniture, bedding, paper etc.
1. Measure the appliance and create a rough-in with electrical supply. The electrical junction box is located on
the left side, at the back of the appliance.
2. Remove the wall mount brackets from the back of the appliance.
3. Remove the front glass (see “front glass installation and removal” section).
4. Remove the plastic panel holding bracket by removing the screws (Fig. 2-5 & 2-6).
Fig. 2-5
Fig. 2-6
5. If side covers are installed prior to recessed installation, remove the side covers by removing the screws (Fig.
2-7 & 2-8).
Fig. 2-8
Fig. 2-7
2.4.2 recessed installation instructions
6. Install trims (see “trim installation” section).
7. Hold the appliance up to ensure it will fit into the framing (see “framing” section).
8. Remove the power cord and complete hardwiring (see “hardwiring installation” section).
9. Use 4 screws (supplied) to secure the appliance into the wall (Fig. 2-9). Do not overtighten screws.
Fig. 2-9
C x 4
EN
W415-2841 / F / 05.10.22 15
installation
2.4.3 trim installation (optional)
1. Install left and right trims, and secure with screws (supplied) (Fig. 2-10).
2. Install top and bottom trims, and secure with screws (supplied) (Fig. 2-11).
Fig. 2-10 Fig. 2-11
2 sets of holes are provided for recessing into the wall. The wall structure may limit how far the appliance
can be recessed. Use the appropriate set of holes when recessing to the frame. Apply shims (not supplied)
between appliance and frame.
note:
It is recommended that the walls of the appliance enclosure be finishing (i.e. drywall) to avoid exposed insula-
tion or vapour barrier coming in contact with the appliance. This will ensure clearance to combustibles is
maintained.
note:
10. Reinstall the plastic panel holding bracket.
11. Place the crystals or optional topaz glass chips and driftwood logs (CHD-1 models only) along the media tray
(see “crystal ember installation” and “optional topaz glass chips and driftwood log installaiton” sections).
12. Install front glass (see “front glass installation and removal” section).
C x 12
W415-2841 / F / 05.10.22
EN
16
installation
1. Remove the front glass (see “front glass installation and removal” section).
2. Install the top and bottom brackets (not supplied).
3. Insert the appliance into the mantel and secure it with the brackets. For appropriate mantel installation
instructions, consult your authorized dealer.
4. Place the crystals or optional topaz glass chips and driftwood logs (CHD-1 models only) along the media tray
(see “crystal ember installation” and “optional topaz glass chips and driftwood log installation” sections).
5. Reinstall the front glass (see “front glass installation and removal” section).
MANTEL
TABLETTE
APPLIANCE
APPAREIL
1/4"
MANTEL
TABLETTE
APPLIANCE
APPAREIL
STEP 1: LIFT
ÉTAPES 1: SOULEVER
STEP 2: INSERT
ÉTAPES 2: INSÉREZ
STEP 3: SET APPLIANCE
ÉTAPES 3: RÉGLÉ APPAREIL
DO NOT SLIDE APPLIANCE
NE GLISSEZ PAS L'APPAREIL
!
!
MANTEL
TABLETTE
APPLIANCE
APPAREIL
1/4"
MANTEL
TABLETTE
APPLIANCE
APPAREIL
STEP 1: LIFT
ÉTAPES 1: SOULEVER
STEP 2: INSERT
ÉTAPES 2: INSÉREZ
STEP 3: SET APPLIANCE
ÉTAPES 3: RÉGLÉ APPAREIL
DO NOT SLIDE APPLIANCE
NE GLISSEZ PAS L'APPAREIL
!
!
MANTEL MANTEL
2.5 installing the appliance into a mantel
EN
W415-2841 / F / 05.10.22 17
If it is necessary to hard wire this appliance, a qualified electrician
must remove the cord connection and wire the appliance directly to
the household wiring. The wire and power supply breaker must be
rated for 120V minimum 15 amps.
This appliance must be electrically connected and grounded in
accordance with local codes if hard wired. In the absence of local
codes, use the latest edition of CSA C22.1 Canadian Electrical Code
in Canada or ANSI/NFPA 70 National Electrical Code in the United
States.
Before hardwiring the appliance, remove the junction box control cover by removing the fasteners as shown.
!
WARNING
• Turn off the appliance completely and let cool before servicing. Only a qualifi ed service person should service
and repair this electric appliance.
3.0 electrical information
3.1 120V hardwiring installation (NEFL42/50/60/74CHS-1 only)
WHITE (N)
BLACK (L1)
GREEN (G)
(N)
(G)
(L1)
1. Remove the securing screws from the junction box
cover plate, located on the left side, at the back
of the appliance. Discard the original junction box
cover plate and set screws aside.
2. Loosen the securing screws in the terminal block to
remove the power cord.
3. Install the strain relief into the junction box cover
plate (supplied), and feed the supply wires through
the 7/8” (22mm) hole. Use minimum 14AWG/2.
4. Insert Green or bare copper wire to the designated
G Terminal. Tighten the screw.
5. Insert White wire to the designated N Terminal. Tighten the screw.
6. Insert Black wire to the designated L1 Terminal. Tighten the screw.
7. Make sure all connections are tightened properly.
8. Reinstall the junction box cover plate using the screws removed in step 1.
TITLE: LABEL, HARDWIRING (NEFL42/50/60/74CHS-1) PART #: W385-2465
REVISION: A: Updated styling/formatting || 06.11.20_F.L. DATE: 03.16.20_F.L.
W385-2465 / A
MATERIAL: CLASS IIIA-2 PERMANENT LEXAN ADHESIVE LABEL, MINIMUM THICKNESS 0.1MM, NON WATER SOLUBLE ADHESIVE CAPABLE OF
WITHSTANDING A MAXIMUM TEMPERATURE OF 175°F (79°C).
SPECIFICATION: BLACK LETTERING ON WHITE BACKGROUND.
MAX OVERALL SIZE: 3.000" x 2.500"
HARDWIRING DIAGRAM
SCHÉMA DE BRANCHMENT
PAR CÂBLE
W
HITE
/
BLANC
(
N
)
WHITE/BLANC (N)
B
LA
C
K
/
N
O
IR
(
L1
)
BLACK/NOIR (L1)
G
REEN
/
VERT
(G)
GREEN/VERT (G)
FIREPLACE JUNCTION
JONCTION DE L'APPAREIL
POWER SUPPLY
SOURCE D'ALIMENTATION
120V
A
W415-2841 / F / 05.10.22
EN
18
electrical information
3.2 120V hardwiring installation (NEFL42/50/60/74/100CHD-1 only)
1. Remove the securing screws from the junction box
cover plate, located on the left side, at the back
of the appliance. Discard the original junction box
cover plate and set screws aside.
2. Loosen the securing screws in the terminal block
to remove the power cord.
3. Install the strain relief into the junction box cover
plate (supplied), and feed the supply wires through
the 7/8” (22mm) hole. Use minimum 14AWG/2.
4. Insert Green or bare copper wire to the designated
G Terminal. Tighten the screw.
5. Insert White wire to the designated N Terminal. Tighten the screw.
6. Insert Black wire to the designated L1 Terminal. Tighten the screw.
7. Make sure all connections are tightened properly.
8. Reinstall the junction box cover plate using the screws removed in step 1.
TITLE: LABEL, HARDWIRING (NEFL42/50/60/74/100CHD-1) PART #: W385-2464
REVISION: A: Updated styling/formatting + added "Red/Rouge (L2)" to 120V diagram || 06.11.20_F.L. DATE: 03.16.20_F.L.
W385-2464 / A
MATERIAL: CLASS IIIA-2 PERMANENT LEXAN ADHESIVE LABEL, MINIMUM THICKNESS 0.1MM, NON WATER SOLUBLE ADHESIVE CAPABLE OF
WITHSTANDING A MAXIMUM TEMPERATURE OF 175°F (79°C).
SPECIFICATION: BLACK LETTERING ON WHITE BACKGROUND.
MAX OVERALL SIZE: 3.000" x 4.000"
HARDWIRING DIAGRAM
SCHÉMA DE BRANCHMENT
PAR CÂBLE
W
HITE
/
BLAN
C
(
N
)
WHITE/BLANC (N)
B
LA
C
K
/
N
O
IR
(
L1
)
BLACK/NOIR (L1)
G
REEN
/
VERT
(G)
GREEN/VERT (G)
FIREPLACE JUNCTION
JONCTION DE L'APPAREIL
POWER SUPPLY
SOURCE D'ALIMENTATION
120V
FIREPLACE JUNCTION
JONCTION DE L'APPAREIL
POWER SUPPLY
SOURCE D'ALIMENTATION
W
HITE
/
BLAN
C
(
N
)
B
LA
C
K
/
N
O
IR
(
L1
)
R
ED
/
R
O
U
G
E
(
L2
)
G
REEN
/
VERT
(G)
WHITE/BLANC (N)
BLACK/NOIR (L1)
RED/ROUGE (L2)
GREEN/VERT (G)
240V
A
A
R
ED
/
R
O
U
G
E
(
L2
)
WHITE (N)
GREEN (G)
(N)
(G)
(L1)
RED (L2) BLACK (L1)
EN
W415-2841 / F / 05.10.22 19
electrical information
3.3 240V hard wiring installation (NEFL42/50/60/74/100CHD-1 only)
1. Remove the securing screws from the junction box
cover plate, located on the left side, at the back
of the appliance. Discard the original junction box
cover plate and set screws aside.
2. Loosen the securing screws in the terminal block to
remove the power cord.
3. Install the strain relief to the junction box cover plate
(supplied), and feed the supply wires through the
7/8” (22mm) hole. Use minimum 14AWG/3.
4. Insert Green or bare copper wire to the designated
G Terminal. Tighten the screw.
5. Insert White wire to the designated N Terminal. Tighten the screw.
6. Insert Black wire to the designated L1 Terminal. Tighten the screw.
7. Insert Red wire to the designated L2 Terminal. Tighten the screw.
8. Make sure all connections are tightened properly.
9. Reinstall the junction box cover plate using the screws removed in step 1.
WHITE (N)
BLACK (L1)
GREEN (G)
(N)
(G)
(L1)
RED (L2) (L2)
TITLE: LABEL, HARDWIRING (NEFL42/50/60/74/100CHD-1) PART #: W385-2464
REVISION: A: Updated styling/formatting + added "Red/Rouge (L2)" to 120V diagram || 06.11.20_F.L. DATE: 03.16.20_F.L.
W385-2464 / A
MATERIAL: CLASS IIIA-2 PERMANENT LEXAN ADHESIVE LABEL, MINIMUM THICKNESS 0.1MM, NON WATER SOLUBLE ADHESIVE CAPABLE OF
WITHSTANDING A MAXIMUM TEMPERATURE OF 175°F (79°C).
SPECIFICATION: BLACK LETTERING ON WHITE BACKGROUND.
MAX OVERALL SIZE: 3.000" x 4.000"
HARDWIRING DIAGRAM
SCHÉMA DE BRANCHMENT
PAR CÂBLE
W
HITE
/
BLAN
C
(
N
)
WHITE/BLANC (N)
B
LA
C
K
/
N
O
IR
(
L1
)
BLACK/NOIR (L1)
G
REEN
/
VERT
(G)
GREEN/VERT (G)
FIREPLACE JUNCTION
JONCTION DE L'APPAREIL
POWER SUPPLY
SOURCE D'ALIMENTATION
120V
FIREPLACE JUNCTION
JONCTION DE L'APPAREIL
POWER SUPPLY
SOURCE D'ALIMENTATION
W
HITE
/
BLAN
C
(
N
)
B
LA
C
K
/
N
O
IR
(
L1
)
R
ED
/
R
O
U
G
E
(
L2
)
G
REEN
/
VERT
(G)
WHITE/BLANC (N)
BLACK/NOIR (L1)
RED/ROUGE (L2)
GREEN/VERT (G)
240V
A
A
R
ED
/
R
O
U
G
E
(
L2
)
W415-2841 / F / 05.10.22
EN
20
finishing
• Power supply service must be completed prior to finishing to avoid reconstruction.
• Heat vents and air openings cannot be covered in any circumstances.
!WARNING
4.0 finishing
4.1 crystal ember installation
4.2 optional topaz glass chips and driftwood log installation
(NEFL42/50/60/74/100CHD-1 only)
The front glass must be removed and the appliance must be secured in its final location before the optional
topaz glass chips and driftwood logs are installed (CHD-1 models only) (see “front glass installation and removal”
section).
Recommended driftwood log placement for NEFL50CHD-1
The front glass must be removed and the appliance
must be secured in its final location before the crystal
embers are installed (see “front glass installation and
removal” section).
1. Remove the 2 screws from the plastic ember bed
panel before applying crystal embers and/or logs to
keep the ember bed panel plat (Fig. 4-1).
2. Carefully place crystal embers into the bottom
media tray (Fig. 4-2).
3. Apply an even layer from side to side.
4. Randomly place the large crystal embers
on top of the small crystal embers (for
NEFL42/50/60/74/100CHD-1 only).
1. Carefully place driftwood logs on the media tray.
2. Use the topaz glass chips to fill in spaces between the driftwood logs. This will improve the overall look of the
appliance.
Fig. 4-2
Recommended driftwood log placement for NEFL42CHD-1
A
A
A1
B
B1
C1
CD
Reference Log Number
A W135-0728-SER
A1 W135-0728-SER Rear Side
B W135-0729-SER
B1 W135-0729-SER Rear Side
C W135-0730-SER
C1 W135-0730-SER Rear Side
D W135-0731-SER
Fig. 4-1
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

NAPOLEON NEFL100CHD-1 Manuel utilisateur

NAPOLEON
Marque
NAPOLEON
Modèle
NEFL100CHD-1
Catégorie
Cheminées
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes