Dell OpenManage Integration Version 7.1 for Microsoft System Center Mode d'emploi

Marque: Dell

Modèle: OpenManage Integration Version 7.1 for Microsoft System Center

Catégorie: Logiciel de gestion de réseau

Taper: Mode d'emploi

OpenManage Integration for Microsoft System

Center Version 7.1 for System Center

Conguration Manager and System Center

Virtual Machine Manager

User’s Guide

Remarques, précautions et avertissements

REMARQUE : Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre produit.

PRÉCAUTION : Une PRÉCAUTION indique un risque d'endommagement du matériel ou de perte de données et vous indique

comment éviter le problème.

AVERTISSEMENT : Un AVERTISSEMENT indique un risque d'endommagement du matériel, de blessures corporelles ou même

de mort.

de ses liales. Les autres marques peuvent être des marques commerciales de leurs propriétaires respectifs.

2019 - 01

Rév. A00

Table des matières

1 Introduction to OMIMSSC..............................................................................................................................7

OMIMSSC features............................................................................................................................................................7

2 Use cases of OMIMSSC ............................................................................................................................... 8

Use cases for deployment scenarios............................................................................................................................... 8

Deploying Windows OS using OMIMSSC console extension for SCCM.............................................................10

Deploying hypervisor using OMIMSSC console extension for SCVMM..............................................................10

Redeploying Windows OS using OMIMSSC............................................................................................................ 11

Deploying non-windows OS using OMIMSSC console extensions....................................................................... 11

Creating Storage Spaces Direct clusters by using predened Operational Templates............................................ 12

Use cases for maintaining devices..................................................................................................................................12

Updating the rmware of servers and MX7000 devices.......................................................................................12

Conguring replaced components............................................................................................................................14

Exporting and importing server proles...................................................................................................................14

3 Views in OMIMSSC......................................................................................................................................15

Launching Server View.................................................................................................................................................... 15

Launching Modular Systems view..................................................................................................................................16

Launching OpenManage Enterprise Modular console........................................................................................... 17

Input/Output Modules............................................................................................................................................... 17

Launching Cluster View....................................................................................................................................................17

Launching iDRAC console................................................................................................................................................18

Launching Maintenance Center......................................................................................................................................18

Launching Jobs and Logs Center................................................................................................................................... 19

4 Managing proles........................................................................................................................................ 20

About credential prole................................................................................................................................................... 20

Predened credential prole.....................................................................................................................................20

Creating credential prole.........................................................................................................................................20

Modifying credential prole....................................................................................................................................... 21

Suppression d'un prol de référence........................................................................................................................ 21

About hypervisor prole (for SCVMM users).............................................................................................................. 22

Creating hypervisor prole........................................................................................................................................22

Modifying hypervisor prole..................................................................................................................................... 23

Deleting hypervisor prole........................................................................................................................................ 23

5 Discovering devices and synchronizing servers with MSSC console............................................................ 24

About reference server conguration............................................................................................................................24

About reference Modular System conguration.......................................................................................................... 24

Discovering devices in OMIMSSC................................................................................................................................. 24

Device discovery in OMIMSSC console extension for SCCM............................................................................. 25

Device discovery in OMIMSSC console extension for SCVMM..........................................................................25

Table des matières

System requirements for managed systems.......................................................................................................... 25

Discovering servers using auto discovery...............................................................................................................25

Discovering servers using manual discovery.......................................................................................................... 26

Discovering MX7000 by using manual discovery...................................................................................................27

Synchronization of OMIMSSC console extension with enrolled SCCM................................................................... 27

Synchronization of OMIMSSC console extension with enrolled SCVMM..........................................................28

Synchronizing with enrolled Microsoft console......................................................................................................28

Resolving synchronization errors................................................................................................................................... 28

Viewing System Lockdown Mode..................................................................................................................................28

Deleting servers from OMIMSSC.................................................................................................................................. 29

Deleting Modular Systems from OMIMSSC...........................................................................................................29

6 Preparing for operating system deployment................................................................................................ 30

À propos de l'image WinPE.............................................................................................................................................30

Fourniture d'un chier WIM pour SCCM................................................................................................................30

Fourniture d'un chier WIM pour SCVMM.............................................................................................................30

Extraction des pilotes DTK....................................................................................................................................... 30

Mise à jour d'une image WinPE.................................................................................................................................31

Preparing for operating system deployment on SCCM console.................................................................................31

Task sequence-SCCM...............................................................................................................................................32

Dénition d'un emplacement de partage par défaut pour le support de démarrage Lifecycle Controller...... 33

Création d'un support de séquence de tâches (ISO de démarrage)...................................................................34

Preparing for non-Windows operating system deployment........................................................................................34

7 Managing Operational Templates................................................................................................................. 35

Predened Operational Templates.................................................................................................................................36

Creating Operational Template from reference servers.............................................................................................. 36

Windows OS component for OMIMSSC console extension for SCCM............................................................. 38

Windows component for OMIMSSC console extension for SCVMM................................................................ 38

Non-Windows component for OMIMSSC console extensions............................................................................38

Creating Operational Template from reference Modular Systems.............................................................................39

Viewing Operational Template........................................................................................................................................40

Modifying Operational Template.................................................................................................................................... 40

Deleting Operational Template........................................................................................................................................ 41

Assigning Operational Template and running Operational Template compliance for servers.................................. 41

Déploiement d'un Operational Template sur des serveurs..........................................................................................42

Assigning Operational Template for Modular Systems................................................................................................42

Deploying Operational Template for Modular System................................................................................................. 43

Unassigning Operational Template.................................................................................................................................43

8 Firmware update in OMIMSSC.................................................................................................................... 45

About update groups.......................................................................................................................................................45

Predened update groups.........................................................................................................................................45

Custom update groups..............................................................................................................................................46

Viewing update groups..............................................................................................................................................46

Creating custom update groups...............................................................................................................................46

Table des matières

Modifying custom update groups............................................................................................................................ 46

Deleting custom update groups................................................................................................................................47

À propos des sources de mise à jour............................................................................................................................. 47

Source de mise à jour prédénie et par défaut...................................................................................................... 48

Sources de mise à jour prédénie et par défaut pour les clusters d'Storage Spaces Direct............................ 48

Sources de mise à jour prédénie et par défaut pour les systèmes modulaires.................................................48

Validation des données à l'aide d'un test de connexion.........................................................................................48

Setting up local FTP.................................................................................................................................................. 49

Setting up local HTTP............................................................................................................................................... 49

Viewing update source.............................................................................................................................................. 49

Creating update source.............................................................................................................................................49

Modifying update source.......................................................................................................................................... 50

Deleting update source............................................................................................................................................. 50

Integration with Dell EMC Repository Manager(DRM)............................................................................................... 51

Integrating DRM with OMIMSSC ............................................................................................................................51

Setting polling frequency................................................................................................................................................. 51

Viewing and refreshing device inventory....................................................................................................................... 51

Applying lters..................................................................................................................................................................53

Removing lters......................................................................................................................................................... 53

Mise à niveau et rétrogradation des versions de micrologiciel à l'aide de la méthode d'exécution de mise à

jour.....................................................................................................................................................................................53

Updates using CAU....................................................................................................................................................54

9 Creating clusters using Operational Template.............................................................................................. 56

Creating logical switch for Storage Spaces Direct clusters........................................................................................56

Création de clusters d'Storage Spaces Direct..............................................................................................................56

10 Managing devices in OMIMSSC.................................................................................................................58

Server recovery................................................................................................................................................................58

Protection vault..........................................................................................................................................................58

Exporting server proles...........................................................................................................................................59

Importing server prole.............................................................................................................................................60

Applying rmware and conguration settings on replaced component....................................................................60

Collecting LC logs for servers......................................................................................................................................... 61

Viewing LC logs..........................................................................................................................................................62

File description........................................................................................................................................................... 62

Exportation de l'inventaire.............................................................................................................................................. 63

Cancelling scheduled jobs...............................................................................................................................................63

11 Conguration et déploiement......................................................................................................................64

Cas d'utilisation................................................................................................................................................................ 64

Création d'un modèle opérationnel................................................................................................................................ 65

Dossiers de programme d'installation............................................................................................................................66

Attribuer un modèle opérationnel...................................................................................................................................66

Déployer un modèle opérationnel...................................................................................................................................67

Composant de système d'exploitation Windows pour l'extension de console OMIMSSC pour SCCM................68

Table des matières

Composant Windows pour l'extension de console OMIMSSC pour SCVMM......................................................... 68

Composant non-Windows pour l'extension de console OMIMSSC pour SCCM/SCVMM....................................68

Découverte dans une console MSSC inscrite..............................................................................................................69

Importation du prol du serveur.....................................................................................................................................69

Exporter le prol du serveur........................................................................................................................................... 69

Achage de journaux LC................................................................................................................................................69

Collecter les journaux LC.................................................................................................................................................70

Remplacement de pièce..................................................................................................................................................70

Interrogation et notication............................................................................................................................................ 70

Lancement d'iDRAC.........................................................................................................................................................70

Lancer le module d'entrée/sortie................................................................................................................................... 70

Résolution des erreurs de synchronisation.................................................................................................................... 71

Synchronisation d'OMIMSSC avec la console Microsoft inscrite...............................................................................71

Attribuer et déployer...................................................................................................................................................71

Exécuter une mise à jour............................................................................................................................................71

12 Appendix.................................................................................................................................................... 72

13 Accessing documents from the Dell EMC support site................................................................................76

Contacter Dell...................................................................................................................................................................76

Table des matières

Introduction to OMIMSSC

OpenManage Integration for Microsoft System Center (OMIMSSC) provides integration into System Center suite of products. OMIMSSC

enables full lifecycle management of Dell EMC PowerEdge servers by using integrated Dell Remote Access Controller (iDRAC) with

Lifecycle Controller (LC), and of Modular Systems (Dell EMC PowerEdge MX7000) by using OpenManage Enterprise Modular Edition.

OMIMSSC oers operating system deployment, Storage Spaces Direct cluster creation, hardware patching, rmware update, and device

maintenance. Integrate OMIMSSC with Microsoft System Center Conguration Manager (SCCM) for managing devices in traditional data

center, or integrate OMIMSSC with Microsoft System Center Virtual Machine Manager (SCVMM) for managing devices in virtual and

cloud environments.

For information about SCCM and SCVMM, see the Microsoft documentation.

OMIMSSC features

Tableau 1. Features for this release

Feature Description

Discover and maintain Modular Systems

Discover, congure, and update rmware of Dell EMC PowerEdge

MX7000 Modular Systems by using Operational Templates.

Create Storage Spaces Direct clusters on System Center 2016

Virtual Machine Manager

Create hyper-v clusters with predened Operational Templates and

Storage Spaces Direct feature enabled on Dell EMC Storage

Spaces Direct Ready Nodes (built on Dell EMC PowerEdge servers

that have been precongured, tested, and certied to run Microsoft

Storage Spaces Direct) from Microsoft System Center Virtual

Machine Manager 2016.

Predened Operational Templates

Predened Operational Templates contains Dell EMC congurations

for creating Storage Spaces Direct clusters and parameters specic

to NIC card vendors.

Conguration compliance report for Modular Systems

Hardware conguration compliance check for Modular Systems

against Operational Template with comparison reports.

UEFI mode

Supports operating system deployment by using UEFI boot mode.

Boot Optimized Storage Solution (BOSS) conguration

Supports BOSS card conguration.

Introduction to OMIMSSC 7

Use cases of OMIMSSC

This chapter covers high-level details for discovering, deploying operating system, creating clusters, and maintaining Dell EMC devices

using OMIMSSC.

Use cases for deployment scenarios

Use OMIMSSC to deploy Windows and non-Windows operating system in SCCM or SCVMM environments using Operational Templates.

REMARQUE : Ensure that you upgrade the device rmware versions to the latest versions available at ftp.dell.com or

downloads.dell.com before deploying the operating system.

REMARQUE : Non-windows operating system deployment is not supported on 11th generation of servers.

Here is a pictorial representation of the operating system deployment use cases in OMIMSSC.

8 Use cases of OMIMSSC

Use cases of OMIMSSC 9

Deploying Windows OS using OMIMSSC console extension for

SCCM

À propos de cette tâche

To deploy Windows OS through SCCM console using OMIMSSC, perform the following steps:

REMARQUE : Before deploying OS on a host server, ensure that in SCCM, the Client status of the server is No.

Étapes

1 Download the latest Dell EMC Deployment ToolKit (DTK) and create a Windows Preinstallation Environment (WinPE) boot WIM image.

For more information, see the WinPE update.

2 Import this .WIN image into the SCCM console, and create a boot image in SCCM. For more information, see the Microsoft

documentation.

3 Create a task sequence in SCCM. For more information, see Creating task sequence.

4 Create a task sequence media image in SCCM. For more information, see the Microsoft documentation.

REMARQUE : To enable unattended OS deployment when creating task sequence media, in Select the type of media,

select Allow unattended operating system deployment check-box.

5 Découvrez le serveur de référence à l'aide de la page Découverte. Pour plus d'informations, reportez-vous à la section Découverte de

serveurs par découverte manuelle.

6 Créez un Operational Template en capturant tous les détails du serveur découvert. Pour plus d'informations, reportez-vous à la section

Création d'un modèle opérationnel à partir de serveurs de référence.

7 Attribuez un Operational Template sur un périphérique géré et vériez la conformité au modèle. Pour plus d'informations, reportez-vous

à la section Attribution d'un modèle opérationnel et exécution de la conformité au modèle opérationnel.

8 Déployez un Operational Template pour rendre le modèle de périphérique conforme. Pour plus d'informations, reportez-vous à la

section Déploiement d'un modèle opérationnel.

9 Achez l'état de tâche du déploiement de système d'exploitation dans la page Centre des tâches et des journaux. Pour plus

d'informations, reportez-vous à la section

Lancement du Centre des tâches et des journaux.

Deploying hypervisor using OMIMSSC console extension for

SCVMM

À propos de cette tâche

The dierent scenarios for hypervisor deployment are as follows:

Tableau 2. Hypervisor deployment scenarios

Condition Action

If you require the latest factory drivers. While creating a hypervisor prole, enable Lifecycle Controller (LC)

driver injection.

If you want to retain the existing hardware conguration. While creating the Operational Template, clear the check box for all

the components that do not require any changes.

To deploy hypervisor through SCVMM console using OMIMSSC, perform the following steps:

Étapes

1 Download the latest Dell EMC Deployment ToolKit (DTK) and create a Windows Preinstallation Environment (WinPE) boot ISO image.

For more information, see the WinPE update.

2 Create a physical computer prole, and a host group in SCVMM. For more information, see the SCVMM documentation.

Use cases of OMIMSSC

3 Create a hypervisor prole in the OMIMSSC console extension for SCVMM. For more information, see Creating a hypervisor prole.

4 Découvrez le serveur de référence à l'aide de la page Découverte. Pour plus d'informations, reportez-vous à la section Découverte de

serveurs par découverte manuelle.

5 Créez un Operational Template en capturant tous les détails du serveur découvert. Pour plus d'informations, reportez-vous à la section

Création d'un modèle opérationnel à partir de serveurs de référence.

6 Attribuez un Operational Template sur un périphérique géré et vériez la conformité au modèle. Pour plus d'informations, reportez-vous

à la section

Attribution d'un modèle opérationnel et exécution de la conformité au modèle opérationnel.

7 Déployez un Operational Template pour rendre le modèle de périphérique conforme. Pour plus d'informations, reportez-vous à la

section Déploiement d'un modèle opérationnel.

8 Achez l'état de tâche du déploiement de système d'exploitation dans la page Centre des tâches et des journaux. Pour plus

d'informations, reportez-vous à la section Lancement du Centre des tâches et des journaux.

Redeploying Windows OS using OMIMSSC

À propos de cette tâche

To redeploy Windows OS on a server by using OMIMSSC console extension for SCCM or OMIMSSC console extension on SCVMM,

perform the following steps:

Étapes

1 Delete the server from the Microsoft console. For more information, see Microsoft documentation.

2 Rediscover the server or synchronize OMIMSSC with the registered Microsoft console. The server is added as an unassigned server in

OMIMSSC. For more information about discovery, see Discovering servers using manual discovery. For more information about

synchronization, see Synchronizing with enrolled Microsoft console.

3 Créez un Operational Template en capturant tous les détails du serveur découvert. Pour plus d'informations, reportez-vous à la section

Création d'un modèle opérationnel à partir de serveurs de référence.

4 Attribuez un Operational Template sur un périphérique géré et vériez la conformité au modèle. Pour plus d'informations, reportez-vous

à la section Attribution d'un modèle opérationnel et exécution de la conformité au modèle opérationnel.

5 Déployez un Operational Template pour rendre le modèle de périphérique conforme. Pour plus d'informations, reportez-vous à la

section Déploiement d'un modèle opérationnel.

6 Achez l'état de tâche du déploiement de système d'exploitation dans la page Centre des tâches et des journaux. Pour plus

d'informations, reportez-vous à la section Lancement du Centre des tâches et des journaux.

Deploying non-windows OS using OMIMSSC console

extensions

À propos de cette tâche

To deploy non-windows OS using OMIMSSC, perform the following steps:

REMARQUE

: Steps to deploy non-windows OS through OMIMSSC is common in both the Microsoft consoles.

Étapes

1 Découvrez le serveur de référence à l'aide de la page Découverte. Pour plus d'informations, reportez-vous à la section Découverte de

serveurs par découverte manuelle

2 Créez un Operational Template en capturant tous les détails du serveur découvert. Pour plus d'informations, reportez-vous à la section

Création d'un modèle opérationnel à partir de serveurs de référence.

3 Attribuez un Operational Template sur un périphérique géré et vériez la conformité au modèle. Pour plus d'informations, reportez-vous

à la section Attribution d'un modèle opérationnel et exécution de la conformité au modèle opérationnel.

4 Déployez un Operational Template pour rendre le modèle de périphérique conforme. Pour plus d'informations, reportez-vous à la

section Déploiement d'un modèle opérationnel.

Use cases of OMIMSSC

REMARQUE :

If the DHCP lookup fails while deployment, then the server times out and the server is not moved into Managed Lifecycle

Controller Lifecycle Controller (ESXi) collection in SCCM.

Creating Storage Spaces Direct clusters by using

predened Operational Templates

To create clusters by using OMIMSSC, perform the following steps:

1 Découvrez le serveur de référence à l'aide de la page Découverte. Pour plus d'informations, reportez-vous à la section Découverte de

serveurs par découverte manuelle.

2 Edit the predened Operational Template. For more information, see Modifying Operational Template.

3 Create a logical switch. For more information, see Creating logical switch.

4 Create Storage Spaces Direct cluster. For more information, see Creating Storage Spaces Direct clusters.

Use cases for maintaining devices

Maintain the discovered devices in OMIMSSC.

Updating the rmware of servers and MX7000 devices

À propos de cette tâche

Here is a pictorial representation of the rmware update workow.

Use cases of OMIMSSC

Use cases of OMIMSSC 13

You can update the selected devices by using the following update sources:

• Online FTP or local FTP source

• Online HTTP or local HTTP source

• Local Dell Repository Manager (DRM) source

Étapes

1 Create or select a default update source. For more information about update source, see Update source.

REMARQUE : Ensure that you update the update source with the latest catalog by using the polling and notication

feature. For more information about polling and notication, see Polling and notication.

If you are updating Storage Spaces Direct clusters, select a predened update source specic for Storage Spaces Direct clusters.

These update sources are displayed only in the Maintenance Center page.

If you are updating MX7000 devices, select a predened update source specic for Modular Systems. These update sources are

displayed only in Maintenance Center page.

2 Create or select the default update groups. For more information about update groups, see Update groups.

3 Discover or synchronize the devices with a registered Microsoft console, and ensure that the device inventory is up-to-date. For more

information about discovery and synchronization, see Device discovery and synchronization . For more information about server

inventory, see

Launching server view.

4 Update the device by using one of the following options:

• Select the required devices, and click Run Update. For more information, see Upgrading or downgrading rmware versions using

run update method.

REMARQUE

: To downgrade the rmware of device components, select the Allow Downgrade check-box. If this

option is not selected, there is no action on the component that requires a rmware downgrade.

• Select the rmware update component in Operational Template and deploy this template. For more information about Operational

Template, see Operational Template.

Conguring replaced components

To match the rmware version, or the conguration settings of the replaced component to that of the old component, see Applying

rmware and conguration settings.

Exporting and importing server proles

À propos de cette tâche

Export the server prole at a particular instance, and then import the prole to reinstate the server:

Étapes

1 Create a protection vault. For more information about creating protection vault, see Creating protection vault.

2 Export a server prole. For more information about exporting server prole, see Exporting server prole.

3 Import server prole to the same server from which it was exported. For more information about importing server prole, see

Importing server prole.

REMARQUE

: You can import the server prole including the RAID conguration only if the RAID conguration is

exported to the prole.

14 Use cases of OMIMSSC

Views in OMIMSSC

View all the devices discovered in OMIMSSC in Conguration and Deployment page along with their hardware and rmware inventory

information. Also, view all the jobs with status in Jobs and Logs Center page.

Sujets :

• Launching Server View

• Launching Modular Systems view

• Launching Cluster View

• Launching iDRAC console

• Launching Maintenance Center

• Launching Jobs and Logs Center

Launching Server View

The Server View page lists all unassigned and host servers that are discovered in OMIMSSC under Unassigned Servers and Hosts tabs.

À propos de cette tâche

In Unassigned Servers tab, view the iDRAC IP address, service tag, model, generation, processor speed, memory of the server, template

compliance status for assigned Operational Template, Modular System’s service tag if it is a modular server, and hardware compatibility

information. On hovering over the Hardware Compatibility column, you can view the versions of BIOS, iDRAC, LC, and driver packs of the

device. For more information about hardware compatibility, see About rmware update.

In Hosts tab, view host name, iDRAC IP address, service tag, model, generation, processor speed, memory of the server, Modular System’s

service tag if it is a modular server, cluster’s Fully Qualied Domain Name (FQDN) if the server is part of a cluster, template compliance

status for assigned Operational Template, and hardware compatibility information. On hovering over the Hardware Compatibility column,

you can view the versions of BIOS, iDRAC, LC, and driver packs of the device. For more information about hardware compatibility, see

About rmware update.

You can perform the following tasks on Server View page:

• Discover servers

• View updated information, by refreshing the page.

• Delete servers from OMIMSSC.

• Synchronize with enrolled Microsoft console.

• Resolving synchronization errors.

• Assign Operational Template and run Operational Template compliance.

• Deploy Operational Template

• Correlate servers to cluster group and the Modular System to which the server belongs to.

• Launch iDRAC console

To view servers:

Étapes

1 In OMIMSSC console extension, click Conguration and Deployment, and then click Server View.

2 To view bare-metal servers, click Unassigned Servers tab.

Views in OMIMSSC 15

3 To view host servers, click Hosts tab.

a To view host groups in nested format as grouped in SCCM or SCVMM, click Select Console Hosts drop-down menu.

The Select Console Hosts drop-down menu lists all the host groups present in SCCM along with an internal group name. If you select

the internal group name, all the hosts that are discovered and managed in SCCM and OMIMSSC are displayed.

Étapes suivantes

After discovering servers, consider the following points:

• The Operational Template column is displayed as Not Assigned, after the servers are discovered. To update rmware and deploy

operating system on these servers, assign and deploy Operational Templates. For more information, see Managing Operational

Templates.

• The discovered servers are added to predened groups in OMIMSSC. You can create custom update groups based on functional

requirements. For more information, see About update groups.

• When you log in to OMIMSSC as a delegated admin, you can view all the host and unassigned servers that are not specic to this user.

Hence, ensure that you have the required privileges before performing any operations on the servers.

• If there are multiple Microsoft consoles enrolled in OMIMSSC, and then host servers are specic to the Microsoft console where they

are managed. And the unassigned servers are common to all consoles.

Launching Modular Systems view

The Modular Systems View page lists all the Modular Systems that are discovered in OMIMSSC.

À propos de cette tâche

View the CMC IP address, service tag, model, rmware version, template compliance status of Modular System for an assigned Operational

Template, number of servers, Input/Output (I/O) Modules, and storage devices present on that Modular System. Congure the hardware

and update Modular System rmware, by deploying the Operational Template.

You can perform the following tasks on Modular Systems View page:

• Discover Modular Systems using manual discovery

• Delete Modular System

• To view latest inventory information, refresh the page.

• Assign Operational Template for Modular System

• Deploy Operational Template for Modular System

• View I/O modules

• Launching I/O modules

To view Modular System discovered in OMIMSSC:

Étapes

1 In OMIMSSC, click Conguration and Deployment, and then click Modular Systems View.

All the Modular Systems discovered model names are displayed.

2 To view a specic Modular System, click a model name under Modular Systems View.

All the Modular Systems of that model are displayed with their service tag.

3 To view all devices present in that Modular System, click service tag.

All the servers, Input Output modules, and storage devices along with their details are displayed.

REMARQUE

: Only after a deep discovery of a Modular System, all devices in the Modular System and their information

are displayed.

• By default the Servers tab is displayed.

All the servers that are discovered in this Modular System are displayed.

• To view all the Input Output Modules present in a Modular System, click I/O Modules tab.

• To view all the storage devices present in the Modular System, click Storage Devices tab.

Étapes suivantes

After discovering Modular Systems, consider the following points:

Views in OMIMSSC

• The Operational Template column is displayed as Not Assigned, after the Modular Systems are discovered. To update rmware and

deploy operating system on these Modular Systems, assign and deploy Operational Templates. For more information, see Managing

Operational Templates.

• View the count of Input/Output, storage devices, and servers present in Modular Systems after a shallow discovery. Perform a deep

discovery, to view more details about the components in a Modular System.

Launching OpenManage Enterprise Modular console

À propos de cette tâche

To launch OpenManage Enterprise Modular console, perform the following steps:

Étapes

1 In OMIMSSC, expand Conguration and Deployment, and click Modular Systems.

2 Click Device IP of the Modular System.

Input/Output Modules

All the network Input/Output Modules along with their IP address, service tag, Input/Output type, model, rmware version and slot

information are displayed.

À propos de cette tâche

Launch I/O Modules console from Input/Output Modules page.

To view information about Input/Output Modules, perform the following steps:

Étapes

1 In OMIMSSC, click Conguration and Deployment, and then click Modular Systems View. Expand the Modular Systems View, and

click service tag.

All service tag of that model are displayed.

2 To view the Input/Output module, click I/O Modules tab.

Launching Input Output Modules console

À propos de cette tâche

Pour lancer la console du module d'entrée/sortie, eectuez les étapes suivantes :

Étapes

1 Dans OMIMSSC, développez Conguration et déploiement, cliquez sur Vue Systèmes modulaires. Développez le modèle au niveau

des périphériques individuels.

Tous les périphériques sous ce modèle s'achent.

2 Cliquez sur Modules d'E/S.

3 Cliquez sur l'adresse IP du périphérique.

Launching Cluster View

The Cluster View page lists all the clusters discovered in OMIMSSC. View cluster’s Fully Qualied Name (FQDN), service tag, and number

of servers present in that cluster. Also, create a logical switch for clusters, and then create Storage Spaces Direct clusters using the

predened Operational Template.

À propos de cette tâche

You can perform the following tasks on Cluster View page:

• Creating logical switch (only for SC2016 VMM users)

• Creating Storage Spaces Direct clusters (only for SC2016 VMM users)

Views in OMIMSSC

• Launching iDRAC console

• To view latest clusters discovered, refresh the page

To view cluster groups discovered in OMIMSSC:

Étapes

1 In OMIMSSC, click Conguration and Deployment, and then click Cluster View.

All the dierent types of clusters are grouped and listed.

2 To view information about specic type of clusters, expand the cluster type.

All the clusters of this type are listed on the left pane.

3 To view servers present in a cluster, click a cluster name.

Launching iDRAC console

À propos de cette tâche

To launch iDRAC console, perform the following step:

Étape

Dans OMIMSSC, développez Conguration et déploiement et sélectionnez l'une des options suivantes :

• Cliquez sur Vue Serveur. En fonction du serveur (s'il s'agit d'un hôte ou d'un serveur non attribué), cliquez sur l'onglet Serveurs

non attribués ou Hôtes, puis cliquez sur l'adresse IP iDRAC du serveur.

L'onglet Serveurs non attribués s'ache par défaut.

Pour acher l'onglet Hôtes, cliquez sur Hôtes.

• Cliquez sur Vue Cluster. Développez le type de cluster et développez le groupe de cluster au niveau du serveur.

L'onglet Serveur s'ache.

Launching Maintenance Center

The Maintenance Center page lists all the discovered devices in groups and the resources that are required for maintaining devices in

OMIMSSC. In Maintenance Center page, view the device’s rmware inventory, manage the devices by keeping their rmware up-to-date

as per the recommendations, revert the server to an earlier state if it has crashed, bring up a replaced component to the same

conguration of the old component, and export server logs for troubleshooting any issues. In Update Settings page view all the update

sources, polling and notications for latest updates from default update source, update groups of devices that require similar management,

and all the protection vaults required for server congurations.

À propos de cette tâche

REMARQUE

: By default, OMIMSSC is packaged with a catalog le that displays an earlier version of the comparison report for

predened FTP and HTTP update source. Hence, download the latest catalog to display the latest comparison report. To

download the latest catalog, edit and save the FTP and HTTP update source.

You can perform the following tasks on Maintenance Center page:

• Create update source

• Set polling frequency

• Select predened update groups or Create custom update groups.

• View and refresh rmware inventory

• Upgrade and downgrade rmware versions using run update method

• Create protection vaults

• Export server proles

• Import server proles

• Exporting inventory

To view Maintenance Center page:

Étape

In OMIMSSC, click Maintenance Center.

Views in OMIMSSC

The Maintenance Center page is displayed.

Launching Jobs and Logs Center

View information about jobs initiated in OMIMSSC along with status of job's progress, and its subtask. Also, you can lter and view jobs of a

particular job category.

À propos de cette tâche

You can view jobs that are initiated from OMIMSSC, in OMIMSSC Admin Portal and OMIMSSC console extension.

• OMIMSSC Admin portal—displays jobs that are initiated from all OMIMSSC consoles and users

• OMIMSSC console—displays jobs specic to a user and a console

Job names are either generated by the system or provided by users, and the subtasks are named after the IP address or hostname of the

managed systems. Expand the subtask to view the activity logs for that job. Jobs are classied under four groups:

• Running—displays all the jobs that are currently running and in-progress state.

• History—displays all the jobs run in the past with its job status.

• Scheduled—displays all the jobs that are scheduled for a future date and time. Also, you can cancel these scheduled jobs.

• Generic Logs—displays OMIMSSC Appliance-specic, common log messages that are not specic to a task, and other activities.

Every job is displayed with a user name and a console FQDN from where it was initiated.

– Appliance Log Messages—displays all OMIMSSC Appliance-specic log messages such as restarting OMIMSSC Appliance. You

can view this category of messages only from OMIMSSC Admin Portal.

– Generic Log Messages—displays log messages that are common across dierent job categories that are listed in Running,

History, and Scheduled tabs. These logs are specic to a console and a user.

For example, if a rmware update job is in-progress for a group of servers, the tab displays log messages that belong to creating the

Server Update Utility (SUU) repository for that job.

The various states of a job that is dened in OMIMSSC are as follows:

• Canceled—job is manually canceled, or after OMIMSSC Appliance restarts.

• Successful—job is completed successfully.

• Failed—job is not successful.

• In Progress—job is running.

• Scheduled—job has been scheduled for a future date and time.

REMARQUE

: If multiple jobs are submitted simultaneously to the same device, the jobs fail. Hence, ensure that you

schedule jobs for same device at dierent times.

• Waiting—job is in a queue.

• Recurring Schedule—job is scheduled at regular intervals.

Étapes

1 In OMIMSSC, click Jobs and Log Center.

2 To view a specic category of jobs, such as Scheduled, History, or Generic, click the required tab.

Expand a job to view all the devices included in that job. Expand further to view the log messages for that job.

REMARQUE

: All the job-related generic log messages are listed under the Generic tab and not under the Running or

History tab.

3 (Optional) Apply lters to view dierent groups of jobs and status of job in Status column.

Views in OMIMSSC

Managing proles

Proles contain all the data that is required for performing any operations in OMIMSSC.

Sujets :

• About credential prole

• About hypervisor prole (for SCVMM users)

About credential prole

Credential proles simplify the use and management of user credentials by authenticating the role-based capabilities of the user. Each

credential prole contains a user name and password for a single user account.

OMIMSSC uses credential proles to connect to the managed systems’ iDRAC. Also, you can use credential proles to access the FTP site,

resources available in Windows shares, and to work with dierent features of iDRAC.

You can create four types of credential proles:

• Device Credential Prole—used to log in to iDRAC or CMC. Also, you can use this prole to discover a server, resolve synchronization

issues, and deploy operating system. This prole is specic to a console. You can use and manage this prole only in a console where it

is created.

• Windows Credential Prole—used for accessing share folders in Windows operating system

• FTP Credential Prole—used for accessing an FTP site

• Proxy Server Credentials—used for providing proxy credentials for accessing any FTP sites for updates.

REMARQUE

: All proles other than device prole are shared resources. You can use and manage these proles from any

of the enrolled consoles.

Predened credential prole

SYSTEM DEFAULT FTP account is a predened credential prole available in OMIMSSC. The predened credential prole is of type FTP,

having User Name, and Password as anonymous. Use this prole to access ftp.dell.com

Creating credential prole

À propos de cette tâche

When creating a credential prole, consider the following points:

• During auto discovery, if a default credential prole is not available for iDRAC, and then the default iDRAC credentials is used. The

default iDRAC user name is root, and password is calvin.

• To get information about the modular systems, the modular server is accessed with default CMC prole. The default CMC prole user

name is root and password is calvin.

• (Only for SCVMM users) When a device type credential prole is created, an associated RunAsAccount is created in SCVMM to

manage the device, and the name of the RunAsAccount is Dell_CredentialProfileName.

• Ensure that you do not edit, or delete the RunAsAccount in SCVMM.

20 Managing proles

La page charge ...

Dell OpenManage Integration Version 7.1 for Microsoft System Center Mode d'emploi

Marque: Dell

Modèle: OpenManage Integration Version 7.1 for Microsoft System Center

Catégorie: Logiciel de gestion de réseau

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Dell OpenManage Integration Version 7.1 for Microsoft System Center User guide

Dell OpenManage Integration Version 7.1 for Microsoft System Center Mode d'emploi

Dell OpenManage Integration Version 7.1 for Microsoft System Center Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents