Haier Beverage Dispenser HVCE24 Manuel utilisateur

Marque: Haier

Modèle: Beverage Dispenser HVCE24

Catégorie: Boissons glacées

Taper: Manuel utilisateur

Ce manuel convient également à

Built-In / Freestanding Wine Cellar

Construire Dans / Indépendant Vin Cave

Construido En / Bodega Aislada

User Manual

Model # HVCE15, HVCE24

Guide de l’Utilisateur

Modéle # HVCE15, HVCE24

Manual del Usuario

Para Modelo de # HVCE15, HVCE24

HVCE24

Quality

Innovation

Style

When using this appliance, always exercise basic safety

precautions, including the following:

1) Read all of the instructions before using this appliance.

2) Use this appliance only for its intended purpose as described in this use

and care guide.

3) This wine cellar must be properly installed in accordance with the

installation instructions before it is used. See grounding instructions in the

installation section.

4) Never unplug your wine cellar by pulling on the power cord. Always grasp

the plug firmly and pull straight out from the outlet.

5) Repair or replace immediately, all electric service cords that have become

frayed or otherwise damaged. Do not use a cord that shows cracks or

abrasion damage along its length, the plug or the connector end.

6) Unplug your wine cellar before cleaning or before making any repairs.

Note: If for any reason this product requires service, we strongly

recommend that a certified technician performs the service.

7) If your old wine cellar is not being used, we recommend that you remove

the door and leave the shelves in place. This will reduce the possibility

of danger to children.

8) Do not operate your wine cellar in the presence of explosive fumes.

9) Do not store foods in wine cellar as interior temperature may not be cool

enough to prevent spoilage.

SAVE THESE INSTRUCTIONS

English

SAFETY PRECAUTIONS

Thank you for using our Haier product.

This easy-to-use manual will guide you in

getting the best use of your wine cellar.

Remember to record the model and serial

number. They are on a label in back of the

wine cellar.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain warranty service.

DANGER

Risk of child entrapment. Before you throw away your

old wine cellar, take off the doors. Leave the shelves in

place so that children may not easily climb inside.

English

PAGE

Safety Precautions ..................................................................1

Parts And Features .................................................................4

Installing Your Wine Cellar......................................................5

Unpacking Your Wine Cellar.................................................................5

Leveling Your Wine Cellar.....................................................................5

Electrical Requirements .........................................................................5

Use of Extension Cord..........................................................................5

Wine Cellar Features And Use.................................................6

Initial Set Up .......................................................................................6

Shelving..............................................................................................7

Interior Light ........................................................................................7

Normal Operating Sounds....................................................................7

Wine Cellar Installation...........................................................8

Installation Limitations...........................................................................8

Dimensions..........................................................................................8

Door Reversal......................................................................................9

Replace Light Bulbs ............................................................................11

Proper Wine Cellar Care and Cleaning..................................12

Cleaning and Maintenance.................................................................12

Power Interruptions.............................................................................12

Vacation and Moving Care.................................................................12

Troubleshooting ....................................................................13

Limited Warranty..................................................................14

TABLE OF CONTENTS

bottle

capacity

adjustable

temp.

control

shelving*

interior

light

door

handle

door trim

leveling

legs

reversible

door

tinted

glass

HVCE15

26 electronic

(not

shown)

glide-out

with

woodtrim

yes

manual

(not

shown)

tube type

grip

brushed

metal or

black

(not

shown)

yes UV-blue

gray

HVCE24

50 electronic

(not shown)

glide-out

with

woodtrim

yes

manual

(not

shown)

tube type

grip

brushed

metal or

black

(not

shown)

yes UV-blue

gray

* Quantity and style will vary per model purchased.

English

HVCE24 HVCE15

PARTS AND FEATURES

Unpacking Your Wine Cellar

1. Remove all packaging material. This includes the foam base and all adhesive

tape holding the wine cellar accessories inside and outside.

2. Inspect and remove any remains of packing, tape or printed materials before

powering on the wine cellar.

Leveling Your Wine Cellar

• Your wine cellar has four leveling legs which are located in the front and rear

corners of your wine cellar. After properly placing your wine cellar in its final

position, you can level your wine cellar.

• Leveling legs can be adjusted by turning them clockwise to raise your wine

cellar or by turning them counterclockwise to lower your wine cellar. The wine

cellar door will close easier when the leveling legs are extended.

Electrical Requirements

• Make sure there is a suitable power outlet (115 volts, 15 amps outlet) with

proper grounding to power the wine cellar.

• Avoid the use of three plug adapters or cutting off the third grounding in

order to accommodate a two plug outlet. This is a dangerous practice

since it provides no effective grounding for the wine cellar and may result

in shock hazard.

Use of Extension Cord

• Avoid the use of an extension cord because of potential safety hazards under

certain conditions. If it is necessary to use an extension cord, use only a 3-wire

extension cord that has a 3-blade grounding plug and a 3-slot outlet that will

accept the plug. The marked rating of the extension cord must be equal to or

greater than the electrical rating of the appliance.

English

INSTALLING YOUR WINE CELLAR

HVCE15 / HVCE24

• Once you have plugged the unit into an electrical outlet, let the unit run for

at least 30 minutes to acclimate itself before making any adjustments. During

this time the Red Wine light will stay on. Temperature inside the cooler, if not

adjusted, will be at 55°-60°F.

• The wine cellar can be set to any temperature you desire to accommodate

your wine storage requirements. To set the temperature, press both the “White

Wine” and “Red Wine” buttons simultaneously and hold for approximately 3

seconds. Now you are in temperature set mode. Decrease the temperature by

pushing the “White Wine” button and increase the temperature by pressing

the “Red Wine” button. Pressing the appropriate button 3 times will adjust the

temperature 3 degrees, pressing 4 times equals 4 degrees, 5 times equals 5

degrees, and so on. Once you have selected the temperature you desire, push

the "On/Off" button. Now the wine cellar is programmed and the LED readout

will return to current internal temperature reading.

• There will be a 3 degree variance +/- between the temperature you select and

the temperature indicated on the LED readout. This occurs because the wine

cellar activates and deactivates trying to maintain your desired temperature.

There is often a 10° variance between the top and bottom shelves of the wine

cellar. Therefore, if you have set the wine cellar for 50° and have a mix of

red and white wines, you may want to put the white wine on the bottom shelf

where the temperature will be 45° F, and place the red wine on the top shelf

where the temperature will be 55° F.

Initial Setup

Temperature

English

WINE CELLAR FEATURES AND USE

Installation Limitations

• Do not install your wine cellar in any location not properly insulated or heated,

e.g. garage etc. Your wine cellar was not designed to operate in temperature

settings below 55˚ Fahrenheit.

• Select a suitable location for the wine cellar on a hard, even surface away

from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking

appliances etc. Any floor unevenness should be corrected with the leveling legs

located on the front and rear bottom corners of the wine cellar.

Dimensions

• Built-in wine cellars need to be ventilated from the front. This feature allows the

unit to be built-in in an enclosed area. The bottom front grille should be clear of

all obstructions. This is absolutely necessary for the air to circulate and for the

unit to operate efficiently. The dimensions for installation are as

follows (WxDxH):

Shelving (will vary by model purchased)

• The shelves are chrome-plated glide-out with wood trim. They are designed

for flexibility and easy cleaning. The shelves are designed to allow free

air movement.

Interior Light

• To complement the look of your wine collection, a soft light has been built

into the wine cellar. The light switch is on the front bottom, or on the electronic

control panel.

Normal Operating Sounds You May Hear

• Boiling water, gurgling sounds or slight vibrations that are the result of the

refrigerant circulating through the cooling coils.

• The thermostat control will click when it cycles on and off.

English

WINE CELLAR INSTALLATIONS

Unit Dimensions

Built-In Dimensions

22-1/8"

English

MODEL W D1 D2 H

HVCE15 14-7/8" 20-5/8" 22-1/8" 34-1/4"

HVCE24 23-7/8" 21-15/32" 22-15/16" 34-1/4"

MODEL W D H

HVCE15 15" 24" 34-1/2"

HVCE24 24" 24" 35"

14-7/8"

20-5/8"

34-1/4"

22-15/16"

23-7/8"

21-15/32"

Door Reversal

1. Upper Hinge Hole Cover 1

2. Upper Hinge Hole Cover 2

3. Upper Hinge Screw Cover

4. Upper Hinge Cover Screw

5. Hinge Cover

6. Upper Hinge Screw

7. Upper Hinge

8. Lower Hinge

9. Lower Hinge Screw

10. Lower Hinge Cover

11. Door Seal

12. Hole Cover

13. Upper Hinge Axes Bushing

14. Door Bushing

15. Axis Bushing Screw

16. Lower Hinge Axes Bushing

17. Handle

18. Spring Gasket

19. Flat Gasket

20. Handle Screw

1. Remove the screw cover from the upper hinge cover. Use a Phillips

head screwdriver to remove the screw that holds the upper hinge cover in place.

Remove the upper hinge cover.

Loosen and remove the screws that hold the upper hinge in place.

Note: Make sure you hold door to prevent it from falling or

being damaged.

Lift and set aside for now.

Remove both of the upper hinge hole covers (left side) and set aside.

English

2. Remove the hole cover from the upper left side of door.

Remove the upper hinge block from right side of door.

Replace upper hinge block on the left side of door.

Replace the hole cover to the hole on the right.

3. Remove lower right hinge cover

Loosen and remove the screws that hold the lower right hinge in place

Remove the doorstopper on the bottom left and replace them on the bottom

right (where hinge was just removed).

Unscrew and move pin from right side position on hinge to left side position on

hinge. (Requires 9/32" hex socket.)

Place lower hinge removed from lower right to lower left side and fasten

in place with the screws.

Replace lower hinge cover.

4. Lay door down on a sturdy surface

Remove door seal (gasket) from rear side on door

Note: Do not use sharp instrument (knife, etc.).

Remove hole covers on right front side of door.

Use Phillips screwdriver to remove the two (2) screws that hold the door handle

in place on left side.

Note: Do not lose washer.

Place 1st screw through top hole on right side and screw into handle.

(Do not tighten completely at this time.)

Place 2nd screw through bottom hole and screw into handle and tighten.

Now tighten the 1st (upper) screw completely.

Replace hole cover previously removed into the open holes on left front

side of door.

5. Take door in hand and place bottom left hole in door over bottom left hinge pin

and put into place.

Note: Make sure you hold door to prevent it from falling or

being damaged.

Take previously removed upper hinge and place it in upper left hole of door.

Take screws and tighten upper hinge to cabinet of unit.

Note: Make sure door is level and closes properly (no gaps).

If it does not, loosen upper hinge screws slightly and adjust door and

retighten. Do this until door is level and closes properly.

Replace hinge cover and tighten with screw. Replace screw cover.

English

Replacing Light Bulb

1. Turn off the wine cellar and unplug the power cord.

2. To remove the light bulb cover use a Phillips head screw driver to remove the

3 screws.

3. Make sure the light bulb is cool before removing it. Replace using a light bulb

10 watts or less.

4. After the bulb is secure, install the light bulb cover and replace the three screws.

5. Turn unit on to its original setting after plugging in the power cord.

Cleaning and Maintenance

Warning: • To avoid electric shock always unplug your wine cellar

before cleaning. Ignoring this warning may result in death

or injury.

Caution: • Before using cleaning products, always read and follow

manufacturer’s instructions and warnings to avoid personal

injury or product damage.

General: • Prepare a cleaning solution of 3-4 tablespoons of baking

soda mixed with warm water. Use sponge or soft cloth,

dampened with the cleaning solution, to wipe down your

wine cellar.

• Rinse with clean warm water and dry with a soft cloth.

• Do not use harsh chemicals, abrasives, ammonia,

chlorine bleach, concentrated detergents, solvents or

metal scouring pads. SOME of these chemicals may

dissolve, damage and/or discolor your wine cellar.

Door Gaskets: • Clean door gaskets every three months according to

general instructions. Gaskets must be kept clean and pliable

to ensure a proper seal.

• Petroleum jelly applied lightly on the hinge side of gaskets

will keep the gasket pliable and ensure a good seal.

Power Interruptions

• Occasionally there may be power interruptions due to thunderstorms or other

causes. Remove the power cord from wall outlet when a power outage occurs.

When power has been restored, replug power cord to wall outlet.

Vacation and Moving Care

• For long vacations or absences, unplug the wine cellar and clean the wine

cellar and door gaskets according to “General cleaning” section. Prop doors

open, so air can circulate inside. When moving always move the wine cellar

vertically. Do not move with the unit lying down. Possible damage to the sealed

system could occur.

English

PROPER WINE CELLAR CARE & CLEANING

Wine Cellar does not operate

• Check if wine cellarr is plugged in.

• Check if there is power at the AC outlet by checking the circuit breaker.

Wine appears too warm

• Frequent door openings.

• Allow time for recently added wine to reach desired temperature.

• Check gaskets for proper seal.

• Adjust temperature control to colder setting.

Wine temperature is too cold

• If temperature control setting is too cold, adjust to a warmer setting.

Wine Cellar runs too frequently

• This may be normal to maintain constant temperature during high temperature

and humid days.

• Doors may have been opened frequently or for an extended period of time.

• Check gasket for proper seal.

• Check to see if doors are completely closed.

Moisture build-up on interior or exterior of the Wine Cellar:

• This is normal during high humidity periods.

• Prolonged or frequent door openings.

• Check door gaskets for proper seal.

Wine Cellar door does not shut properly:

• Level the wine cellar.

• Check for blockages, e.g. wine bottles, shelves.

English

TROUBLESHOOTING

What is covered and for how long?

This warranty covers all defects in

workmanship or materials for a period of:

12 months labor

12 months parts

5 years sealed system

The warranty commences on the date

the item was purchased and the original

purchase receipt must be presented to the

authorized service center before warranty

repairs are rendered.

EXCEPTIONS:

Commercial or Rental Use warranty

90 days labor (carry-in only)

90 days parts

No other warranty applies

What is covered.

1. The mechanical and electrical parts,

which serve as a functional purpose of this

appliance for a period of 12 months. This

includes all parts except finish

and trim.

2. The components of the sealed system, e.g.

hermetic compressor, condenser

and evaporator from manufacturing

defects for a period of 5 years from the

date of purchase. Any damages to such

components caused by mechanical abuse

or improper handling or shipping will not

be covered.

What will be done?

1. We will repair or replace, at our

discretion, any mechanical or electrical

part which proves to be defective in

normal usage during the warranty period

so specified.

2. There will be no charge to the purchaser

for parts and labor on any covered items

during the initial 12 month period. Beyond

this period onlyparts are covered in the

remaining warranty. Labor is not provided

and must be paid by the customer.

3. Contact your nearest authorized service

center. For the name of the nearest service

center please call 1-877-337-3639.

THIS WARRANTY COVERS APPLIANCES

WITHIN THE CONTINENTAL UNITED

STATES,PUERTO RICO AND CANADA.

IT DOES NOT COVER THE FOLLOWING:

Damages from improper installation.

Damages in shipping.

Defects other than manufacturing.

Damage from misuse, abuse, accident,

alteration, lack of proper care and

maintenance or incorrect current or voltage.

Damage from other than household use.

Damage from service by other than an

authorized dealer or service center.

Decorative trims or replaceable light bulbs.

Transportation and shipping.

Labor (after the initial 12 months).

THIS LIMITED WARRANTY IS GIVEN IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED

OR, INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

The remedy provided in this warranty

is exclusive and is granted in lieu of all

other remedies.

This warranty does not cover incidental or

consequential damages, so the above limita-

tions may not apply to you. Some States do

not allow limitations on how long an implied

warranty lasts, so the above limitations may

not apply to you.

This warranty gives you specific legal rights,

and you may have other rights, which vary,

from state to state.

Haier America

New York, NY 10018

English

LIMITED WARRANTY

Français

Lors de l’utilisation de cet appareil, prendre toutes les mesures de

sécurité de base, y compris les suivantes:

1) Lire l’ensemble des instructions avant d’utiliser l’appareil.

2) N’utiliser cet appareil que pour l’usage pour lequel il est prévu, tel qu’il est

indiqué dans le guide d’utilisation et d’entretien.

3) Ce réfrigérateur à vin doit être installé correctement, selon les instructions

d'installation, avant d'être utilisé. Voir les instructions de mise à la terre

dans la section d'installation.

4) Ne jamais débrancher le réfrigérateur à vin en tirant sur le cordon

d'alimentation. Saisissez toujours la fiche fermement et la tirez-la

directement de la prise de courant.

5) Réparez ou remplacez immédiatement tous les cordons d'alimentation qui

sont frangés ou endommagés. N'utilisez pas de cordon qui présente des

fissures ou de l'abrasion sur le fil ou aux extrémités.

6) Débranchez votre réfrigérateur avant de le nettoyer ou d'en faire l'entretien

général. Note: N'essayez pas de faire les réparations vous-mêmes.

Contactez un agent de service qualifié pour toute réparation.

7) Si vous remplacez un vieux réfrigérateur à vin, enlevez les portes avant de

l'entreposer ou de le jeter et laissez les étagères en place. Cela réduira les

dangers potentiels pour les enfants.

8) Ne faites pas fonctionner le réfrigérateur à vin en présence

d'émanations explosives.

9) N'enregistrez pas les nourritures dans le refroidisseur de vin car la tempéra

ture intérieure peut ne être assez fraîche pour empêcher ladétérioration.

VEUILLEZ CONSERVER

CES INSTRUCTION

MESURES DE SECURITE

DANGER

Les enfants pourraient se retrouver coincés dans votre réfrigérateur

à vin usagé avant que vous ne puissiez vous en débarrasser.

Retirer les portes. Laisser les étagères en place de manière à ce

que les enfants ne puissent pas grimper facilement à l’intérieur.

Nous vous remercions d’avoir choisi ce

produit Haier. Ce guide d’utilisation

facile d’emploi permet une utilisation

optimum du réfrigérateur á vin.

Ne pas oublier de prendre note du

numéro de modèle et de série. Ils

sont inscrits sur plaquette apposée sur

l’arrière du réfrigérateur à vin.

Numéro de modèle

Numéro de série

Date d’achat

Agrafer le ticket de caisse au guide. Il devra être présenté pour tout

service après-vente sous garantie.

Français

PAGE

Mesures de Sécuriteé ............................................................... 1

Pièces et Caractéristiques......................................................... 4

Installation du Réfrigératuer á Vin ...........................................5

Désemballage du Réfrigérateur á Vin ...................................................... 5

Réglage du Réfrigérateur á Vin............................................................... 5

Caractéristiques Electriques.................................................................... 5

Utilisation de Rallonges ......................................................................... 5

Caractéristques du Réfrigérateur á Vin..................................... 6

Montage Initial ..................................................................................... 6

Tablettes............................................................................................... 7

Lumière Intèrieure.................................................................................. 7

Bruits de Fonctionnement lors d'une Exploitation Normale ......................... 7

Installation du Compartiment à Vin..........................................8

Limitations............................................................................................8

Dimensions...........................................................................................8

Changer l'emplacement de la Porte ........................................................9

Remplacer les Ampoules......................................................................11

Entretien et Nettoyage du Réfrigérateur á Vin........................ 12

Nettoyage et Maintenance................................................................... 12

Coupures de Courant .......................................................................... 12

Entretien lors des Vacances ou d'un Déménagement ............................... 12

Guide de Dépannage............................................................. 13

Garantie ................................................................................ 14

SOMMAIRE

* Quantité et modèle changer par modèle acheter.

capacité

bouteille

commande

température

réglable

rayonage

lumière

intérieure

poignée

de porte

équilibre

de porte

mise à

niveau

des

jambes

porte

réversible

verre

teinté

HVCE15

26 électronique

(non

montrer)

glissement

dehors

avec le

woodtrim

oui

manuel

(non

montrer)

type

poignée

de tube

métal

balayé

ou noir

(non

montrer)

si bleu

UV-gris

HVCE24

50 électronique

(non

montrer)

glissement

dehors

avec le

woodtrim

oui

manuel

(non

montrer)

type

poignée

de tube

métal

balayé

ou noir

(non

montrer)

si bleu

UV-gris

Français

HVCE24 HVCE15

PIÉCES ET CARACTÉRISTIQUES

Désemballage du Réfrigérateur á Vin

1. Retirer l’ensemble du material d’emballage. Ceci comprend la base en mousse

ainsi que l’ensemble du materiel adhesif qui maintient les accessoires du

réfrigérateur à vin l’intérieur tout comme à l’extérieur.

2. Inspecter et enlever tout restant d’emballage, de scotch ou de matériaux

imprimés avant de brancher le réfrigérateur à vin.

Réglage du Réfrigérateur á Vin

• Votre refroidisseur de vin a quatre jambes de mise à niveau qui sont plac dans

les coins avant et arrière de votre refroidisseur de vin.

• Pour régler les pieds de mise à niveau, les tourner dans le sens des aiguilles

d’une montre afin de surélever le réfrigérateur á vin et dans le sens inverse des

aiguilles d’une montre pour l’abaisser. La porte du réfrigérateur á vin se ferme

plus facilement lorsque les pieds de mise à niveau sont surélevés.

Caractéristiques Electriques

• Pour l’alimentation du réfrigérateur á vin, veiller à utiliser une prise de courant

convenable (prise de 115 volts,15 amp) raccordée à la terre.

• Eviter d’utiliser des adaptateurs à trois fiches ou de sectionner la troisième fiche

reliée à la terre dans le but d’utiliser un branchement à deux fiches. Cette

pratique pourrait s’avérer dangereuse dans la mesure où le réfrigérateur á vin

n’est pas relié convenablement à la terre, et risquerait de causer des risques

d’électrocution.

Utilisation de Rallonges

• Éviter d’utiliser une rallonge électrique car, dans certains cas, cela peut

entraîner des risques pour la santé. S’il est nécessaire d’utiliser une rallonge,

utiliser uniquement une rallonge possédant une fiche male à deux broches plus

terre à une extrémité et une prise femelle de même type à l’autre extrémité. La

capacité électrique de la rallonge doit être égale ou supérieure à la capacité

de l’appareil.

Français

INSTALLATION DU RÉFRIGÉRATEUR Á VIN

La page charge ...

Haier Beverage Dispenser HVCE24 Manuel utilisateur

Marque: Haier

Modèle: Beverage Dispenser HVCE24

Catégorie: Boissons glacées

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Haier Beverage Dispenser HVCE24 User manual
español: Haier Beverage Dispenser HVCE24 Manual de usuario

Documents connexes

Autres documents

Amana AWCE50AR Manuel utilisateur