Miller ARCSTATION WELD TABLE - 60SX Le manuel du propriétaire

Catégorie
Système de soudage
Taper
Le manuel du propriétaire

Ce manuel convient également à

ArcStation 60SX
OM-244997D 201812
Place serial number or
lot code sticker here.
For product information,
Owner’s Manual translations,
and more, visit
www.MillerWelds.com
File: Accessory
Miller Electric manufactures a full line
of welders and welding related equipment.
For information on other quality Miller
products, contact your local Miller distributor to receive the latest full
line catalog or individual specification sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller, or visit us at
www.MillerWelds.com on the web.
Thank you and congratulations on choosing Miller. Now you can
get the job done and get it done right. We know you don’t have
time to do it any other way.
That’s why when Niels Miller first started building arc welders in
1929, he made sure his products offered long-lasting value and
superior quality. Like you, his customers couldn’t afford anything
less. Miller products had to be more than the best they could be.
They had to be the best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and
service that meets the high standards of quality and value
established in 1929.
This Owners Manual is designed to help you get the most out of
your Miller products. Please take time to read the Safety
precautions. They will help you protect yourself against potential
hazards on the worksite. We’ve made installation and operation
quick and easy. With Miller you can count on years of reliable
service with proper maintenance. And if for some reason the unit
needs repair, there’s a Troubleshooting section that will help you
figure out what the problem is. The parts list will then help you to
decide the exact part you may need to fix the problem. Warranty
and service information for your particular model are also provided.
Working as hard as you do
every power source from
Miller is backed by the most
hassle-free warranty in the
business.
From Miller to You
Mil_Thank2
201707
TABLE OF CONTENTS
SECTION 1 SAFETY PRECAUTIONS READ BEFORE USING 1..................................
1-1. Symbol Usage 1........................................................................
1-2. Welding Table Hazards 1................................................................
1-3. Proposition 65 Warnings 1...............................................................
1-4. Principal Safety Standards 1.............................................................
SECTION 2 CONSIGNES DE SÉCURITÉ LIRE AVANT UTILISATION 2............................
2-1. Symboles utilisés 2.....................................................................
2-2. Dangers liés à la table de soudure 2.......................................................
2-3. Proposition californienne 65 Avertissements 2...............................................
2-4. Principales normes de sécurité 2..........................................................
SECTION 3 ASSEMBLY 3.....................................................................
3-1. Hardware Description 3..................................................................
3-2. 60SX Welding Table Specifications 4.......................................................
3-3. Parts Layout 4.........................................................................
3-4. 60SX Welding Table Assembly 4..........................................................
A. Tools Needed 4.......................................................................
B. Table Tops 5..........................................................................
C. Support Rails 5.......................................................................
D. Center Subframe And End Subframes 6..................................................
E. Connecting Center And End Subframes To Rails And Installing Leveling Feet 7..................
F. Installing Bottom Trays 8...............................................................
G. Rotating Welding Table Upright 8........................................................
H. Installing Stiffener Brackets And Work Lead Tab 9..........................................
I. Grounding The Welding Table 9..........................................................
WARRANTY
OM-244997 Page 1
SECTION 1 SAFETY PRECAUTIONS READ BEFORE USING
weld table_2018-01
Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.
1-1. Symbol Usage
DANGER! Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or ex-
plained in the text.
NOTICE Indicates statements not related to personal injury.
. Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-
bols and related instructions below for necessary actions to avoid the
hazards.
1-2. Welding Table Hazards
Only qualified persons should install, operate, maintain, and repair this equipment. A qualified person is defined as one who, by pos-
session of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training and experience, has
successfully
demonstrated ability to solve or resolve problems relating to the subject matter, the work, or the project and has received
safety training to recognize and avoid the hazards involved.
READ INSTRUCTIONS.
D Read and follow all labels and the Owner’s
Manual carefully before installing, operating, or
servicing unit. Read the safety information at
the beginning of the manual and in each
section.
D Use only genuine replacement parts from the manufacturer.
D Perform installation, maintenance, and service according to the
Owner’s Manuals, industry standards, and national, state, and
local codes.
D Do not repair, modify, or disassemble the weld table or use with
parts or accessories not supplied by the manufacturer. Use only
approved components and accessories from the manufacturer.
D Be sure all hardware is properly tightened.
D Do not use the welding table until you are sure it is correctly as-
sembled and working properly.
D Before each use, inspect the weld table for damage and verify it
is secure and installed properly.
ELECTRIC SHOCK can kill.
Touching live electrical parts can cause fatal shocks
or severe burns.
D Incorrectly installed or improperly grounded
equipment is a hazard. Properly install,
ground, and operate this equipment according to its Owner’s Manual
and national, state, and local codes. Also read American National
Standard Z49.1, Safety in Welding, Cutting, and Allied Processes,
from American Welding Society (www.aws.org).
FIRE OR EXPLOSION hazard.
D Do not install or place unit on, over, or near
combustible surfaces.
D Do not install unit near flammables.
D Use the welding table only for the recommended application.
Do not use the welding table for non-welding operations, such as
painting, sawing wood, or any activity that could produce flam-
mable materials.
D Before each use, empty the debris in the collection tray into a fire-
proof container.
FALLING EQUIPMENT can injure.
D Do not exceed the maximum weight rating of
welding table, drawers, or shelves (see Spe-
cifications). Spread weight evenly on welding
table, and in drawers and shelves. Do not use
the welding table, tray, drawers, or shelves to
stand on or support heavy equipment.
D Use correct procedures and equipment of adequate capacity to
lift and support unit.
D If using lift forks to move unit, be sure forks are long enough to
extend beyond opposite side of unit.
D Do not use powered equipment to drag unit.
D Do not move or install welding table where it could tip. Install the
welding table on a firm, level surface and away from flammable
materials. Lock wheels to keep table in position.
D Follow the guidelines in the Applications Manual for the Revised
NIOSH Lifting Equation (Publication No. 94110) when manu-
ally lifting heavy parts or equipment.
1-3. Proposition 65 Warnings
WARNING: Cancer and Reproductive Harm www.P65W
arnings.ca.gov
1-4. Principal Safety Standards
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www
.global.ihs.com).
Applications Manual for the Revised NIOSH Lifting Equation, The Na-
tional Institute for Occupational Safety and Health (NIOSH), 1600
Clifton Rd, Atlanta, GA 30329-4027 (phone: 1-800-232-4636, website:
www.cdc.gov/NIOSH).
OM-244997 Page 2
SECTION 2 CONSIGNES DE SÉCURITÉ LIRE AVANT
UTILISATION
weld table_2018-01_fre
Pour écarter les risques de blessure pour vousmême et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives
aux précautions de sécurité et au mode opératoire.
2-1. Symboles utilisés
DANGER! Indique une situation dangereuse qui si on
l’évite pas peut donner la mort ou des blessures graves.
Les dangers possibles sont montrés par les symboles
joints ou sont expliqués dans le texte.
Indique une situation dangereuse qui si on l’évite pas
peut donner la mort ou des blessures graves. Les dan-
gers possibles sont montrés par les symboles joints ou
sont expliqués dans le texte.
AVIS Indique des déclarations pas en relation avec des blessures
personnelles.
. Indique des instructions spécifiques.
Ce groupe de symboles veut dire Avertissement! Attention! DANGER
DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES
CHAUDES. Consulter les symboles et les instructions ci-dessous y
afférant pour les actions nécessaires afin d’éviter le danger.
2-2. Dangers liés à la table de soudure
L’installation, l’utilisation, l’entretien et les réparations ne
doivent être confiés qu’à des personnes qualifiées. Une
personne qualifiée est définie comme celle qui, par la
possession
d’un diplôme reconnu, d’un certificat ou d’un
statut professionnel, ou qui, par une connaissance, une for-
mation et une expérience approfondies, a démontré avec
succès sa capacité à résoudre les problèmes liés à la tâche,
le travail ou le projet et a reçu une formation en sécurité afin
de reconnaître et d’éviter les risques inhérents.
LIRE LES INSTRUCTIONS.
D Lire et appliquer les instructions sur les
étiquettes
et le Mode d’emploi avant l’instal-
lation, l’utilisation ou l’entretien de l’appareil.
Lire les informations de sécurité au début du
manuel et dans chaque section.
D N’utiliser que les pièces de rechange recommandées par le
constructeur.
D Effectuer l’installation, l’entretien et toute intervention selon les
manuels d’utilisateurs, les normes nationales, provinciales et de
l’industrie,
ainsi que les codes municipaux.
D Ne pas réparer. modifier ou démonter la table de soudure ou l’utiliser
avec des pièces ou accessoires non fournis par le fabricant. Utiliser
uniquement des composants approuvés par le fabricant.
D S’assurer que toute la quincaillerie est bien serrée.
D Ne pas utiliser la table de soudure avant d’être certain qu’elle est
bien montée et qu’elle fonctionne correctement.
D Avant chaque utilisation, inspecter la table de soudure pour
déceler tout signe de dommage et s’assurer qu’elle est bien
installée et maintenue correctement.
UNE DÉCHARGE ÉLECTRIQUE peut
entraîner la mort.
Le contact d’organes électriques sous tension peut
provoquer des accidents mortels ou des brûlures
graves.
D Un appareil mal installé ou mal raccordé à la terre est dangereux.
Installer, mettre à la terre et utiliser correctement cet appareil,
conformément
à son manuel d’utilisation et aux codes nationaux,
provinciaux et municipaux. Lire également la norme Z49.1 de
l’American National Standard Institute (ANSI), Safety in Welding,
Cutting, and Allied Processes, (Règles de sécurité en soudage,
coupage et procédés connexes) de l’American Welding Society
(www.aws.org).
Risque D’INCENDIE OU D’EXPLOSION.
D Ne pas placer l’appareil sur, au-dessus ou
à proximité de surfaces inflammables.
D Ne pas installer l’appareil à proximité de pro-
duits inflammables.
D Utiliser uniquement la table de soudure pour ce dont elle est
conçue. Ne pas utiliser la table de soudure pour des tâches qui
ne sont pas liées à la soudure, comme la peinture, la coupe du
bois ou toute autre activité qui pourrait produire des matières in-
flammables.
D Avant chaque utilisation, vider les débris du plateau collecteur
dans un contenant à l’épreuve des flammes.
LA CHUTE DE L’ÉQUIPEMENT peut
provoquer des blessures.
D Ne pas dépasser les limites de poids de la
table de soudure, des tiroirs ou des étagères (se
reporter à la fiche technique). Distribuer le poids
de manière uniforme sur la table de soudure, dans les tiroirs et sur les
étagères. Ne pas utiliser la table de soudure, le plateau, les tiroirs ou
les étagères pour soutenir de l’équipement lourd.
D Utilisez les procédures correctes et des équipements d’une ca-
pacité appropriée pour soulever et supporter l’appareil.
D En utilisant des fourches de levage pour déplacer l’unité, s’assu-
rer que les fourches sont suffisamment longues pour dépasser
du côté opposé de l’appareil.
D Ne pas utiliser d’équipement motorisé pour tirer l’unité.
D Ne pas déplacer ou installer la table de soudure à un endroit où
elle pourrait se renverser. Installer la table de soudure sur une
surface ferme et de niveau, loin des matières inflammables.
Verrouiller les roues pour maintenir la table en position.
D Suivre les consignes du Manuel des applications pour l’équation
de levage NIOSH révisée (Publication Nº94–110) lors du levage
manuelle de pièces ou équipements lourds.
2-3. Proposition californienne 65 Avertissements
AVERTISSEMENT : cancer et troubles de la reproduction www.P65W
arnings.ca.gov
.
2-4. Principales normes de sécuri
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www
.global.ihs.com).
Applications Manual for the Revised NIOSH Lifting Equation, The Na-
tional Institute for Occupational Safety and Health (NIOSH), 1600
Clifton Rd, Atlanta, GA 30329-4027 (phone: 1-800-232-4636, website:
www.cdc.gov/NIOSH).
OM-244997 Page 3
SECTION 3 ASSEMBLY
3-1. Hardware Description
247 341-A
OM-244997 Page 4
3-2. 60SX Welding Table Specifications
Total Maximum Load Capacity Maximum Shelf Load Capacity Maximum Tool Chest Drawer
Capacity (Each Drawer)
1000 lb (454 kg) 100 lb (45 kg) 40 lb (18 kg)
3-3. Parts Layout
1 300 606 Top, solid 3/8 in. thick (1)
or
300 607 Top, X-pattern 3/8 in. thick (1)
2 244 936 Subframe, end (2)
3 244 965 Foot, mtg (6)
4 244 935 Subframe, center (1)
5 244 949 Front/Rear Rail (4)
6 244 950 Tray, bottom (2)
7 245 618 Bracket, stiffener (2)
8 245 672 Cap, tube small (4)
9 245 673 Cap, tube large (2)
10 245 874 Tab, work lead (1)
244 952 Hardware (1)
3
2
5
4
6
1
1
7
8
9
10
3-4. 60SX Welding Table Assembly
A. Tools Needed
1/2 in.
hex bit 3/16 in.
hex wrench 3/16 in.
level
OM-244997 Page 5
B. Table Tops
1 Table Tops
Wipe off rust inhibitor from table
tops.
Place table tops flat on the floor.
. Tops for 60SX model are
shown; solid tops use the same
tapped hole layout.
. X-pattern top can be on either
side. Check the following
instructions to be sure how
tops will be positioned after
assembly.
Use a mallet to tap tops together so
they touch at the center.
1
Four holes must be
together in center of tops.
Tools Needed:
C. Support Rails
1 Tapped Holes For Front/Rear
Rails
2 Front/Rear Rails
Place four front/rear rails on table
tops as shown, but do not fasten
rails to tops yet.
2
2
1
1
1
1
1
1
11
Bottom View
OM-244997 Page 6
D. Center Subframe And End Subframes
1 Tapped Holes For Center
Subframe And End
Subframes
2 Center Subframe
3 End Subframes
Place center and end subframes on
table top as shown. Fasten one
subframe at a time to ease
installation.
Table top hardware will
be used at this point.
Use eight bolts CC and eight
washers WW. Install bolts into table
top ends.
Use eight bolts AA and eight
washers WW. Install bolts into
slotted holes for the center and end
subframes and rails.
Tighten all bolts.
2
Tools Needed:
3
hex bit 3/16 in.
1
1
1
1
1
1
CC and WW
AA and WW
3
Bottom View
OM-244997 Page 7
E. Connecting Center And End Subframes To Rails And Installing Leveling Feet
1 Center Subframe
2 End Subframes
Use 16 bolts AA and 16 locknuts ZZ
at each angle bracket as shown to
connect center and end subframes
and rails.
Tighten all bolts and locknuts.
3 Leveling Foot
Install six leveling feet to bottom of
leg assembly tubes.
Do not tighten leveling feet at this
time.
Tools Needed:
1
2
2
AA and ZZ
1/2 in.
hex bit 3/16 in.
3
OM-244997 Page 8
F. Installing Bottom Trays
! Use two people to rotate
welding table.
It is recommended that a piece of
cardboard be placed on the floor to
prevent damaging the finish on the
end subframes. Rotate the welding
table on its side as shown.
. Install shelves so that the wider
flange is on the end subframe
and the narrower flange is on
the center subframe.
Use four bolts AA and four locknuts
ZZ to install shelves to bottom
brackets of the center and end
subframes.
Use two bolts EE and locknuts ZZ
to fasten trays to the center
subframe.
Tighten all bolts and locknuts.
Proceed to Subsection G.
Tools Needed:
1/2 in.
hex bit 3/16 in.
AA and ZZ
EE and ZZ
AA and ZZ
G. Rotating Welding Table Upright
! Use two people to rotate
welding table.
Rotate the welding table to its
upright position.
OM-244997 Page 9
H. Installing Stiffener Brackets And Work Lead Tab
1 Stiffener Brackets
Use three bolts EE and three
locknuts ZZ and install two cross
members to rear of center and end
subframes.
2 Tapped Holes For Work Lead
Ta b
3 Work Lead Tab
Attach work lead tab with one bolt
DD to bottom side and at the rear of
the tops using any one of the four
tapped holes.
4 Leveling Foot (6)
. To level the 60SX, adjust
leveling feet for the center
subframe first. Then adjust
leveling feet for the end
subframes.
Adjust leveling feet until the welding
table is stable and the tops are
level. Do not tighten jam nuts on
feet at this time.
After setting the welding table in
place, make final adjustments to
leveling feet keeping the tops level
and the feet solid on the floor.
Tighten jam nuts on feet at this time.
Tools Needed:
1
1
1/2 in.
hex bit 3/16 in.
EE and ZZ
EE and ZZ
EE and ZZ
2
2
Top View
Rear
2
2
3
DD
4
I. Grounding The Welding Table
! Connect welding table to a
good electrical ground
(independent of the welding
leads) unless a qualified
person assures it is safe to
work on an ungrounded
workpiece.
1 Ground Bolt
2 Tapped Hole For Ground Bolt
Use the supplied ground bolt to
connect the welding table to a good
electrical ground according to
national, state, and local codes.
Tools Needed:
hex bit 3/16 in.
1
2
Effective January 1, 2018
(Equipment with a serial number preface of MJ or newer)
This limited warranty supersedes all previous Miller warranties and is exclusive with no other
guarantees or warranties expressed or implied.
LIMITED WARRANTY Subject to the terms and conditions below,
Miller Electric Mfg. LLC, Appleton, Wisconsin, warrants to its original
retail purchaser that new Miller equipment sold after the effective date of
this limited warranty is free of defects in material and workmanship at
the time it is shipped by Miller. THIS WARRANTY IS EXPRESSLY IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS.
Within the warranty periods listed below, Miller will repair or replace any
warranted parts or components that fail due to such defects in material
or workmanship. Miller must be notified in writing within thirty (30) days
of such defect or failure, at which time Miller will provide instructions on
the warranty claim procedures to be followed. If notification is submitted
as an online warranty claim, the claim must include a detailed
description of the fault and the troubleshooting steps taken to identify
failed components and the cause of their failure.
Miller shall honor warranty claims on warranted equipment listed below
in the event of such a failure within the warranty time periods. All
warranty time periods start on the delivery date of the equipment to the
original end-user purchaser, and not to exceed twelve months after the
equipment is shipped to a North American distributor or eighteen
months after the equipment is shipped to an International distributor.
1. 5 Years Parts — 3 Years Labor
* Original Main Power Rectifiers Only to Include SCRs,
Diodes, and Discrete Rectifier Modules
2. 3 Years — Parts and Labor
* Auto-Darkening Helmet Lenses (Except Classic
Series) (No Labor)
* Engine Driven W
elder/Generators
(NOTE: Engines are Warranted Separately by the
Engine Manufacturer.)
* Inverter Power Sources
* Plasma Arc Cutting Power Sources
* Process Controllers
* Semi-Automatic and Automatic Wire Feeders
* Transformer/Rectifier Power Sources
3. 2 Years — Parts and Labor
* Auto-Darkening Helmet Lenses Classic Series Only
(No Labor)
* Auto-Darkening Weld Masks (No Labor)
* Fume Extractors Capture 5, Filtair 400 and Industrial
Collector Series
4. 1 Year — Parts and Labor Unless Specified
* AugmentedArc and LiveArc Welding Systems
* Automatic Motion Devices
* Bernard BTB Air-Cooled MIG Guns (No Labor)
* CoolBelt and CoolBand Blower Unit (No Labor)
* Desiccant Air Dryer System
* External Monitoring Equipment and Sensors
* Field Options
(NOTE: Field options are covered for the remaining
warranty period of the product they are installed in,
or for a minimum of one year — whichever is
greater.)
* RFCS Foot Controls (Except RFCS-RJ45)
* Fume Extractors Filtair 130, MWX and SWX Series
* HF Units
* ICE/XT Plasma Cutting Torches (No Labor)
* Induction Heating Power Sources, Coolers
(NOTE: Digital Recorders are Warranted
Separately by the Manufacturer.)
* Load Banks
* Motor-Driven Guns (except Spoolmate Spoolguns)
* PAPR Blower Unit (No Labor)
* Positioners and Controllers
* Racks
* Running Gear/Trailers
* Spot Welders
* Subarc Wire Drive Assemblies
* TIG Torches (No Labor)
* Tregaskiss Guns (No Labor)
* Water Cooling Systems
* Wireless Remote Foot/Hand Controls and Receivers
* Work Stations/Weld Tables (No Labor)
5. 6 Months — Parts
* Batteries
6. 90 Days — Parts
* Accessory (Kits)
* Canvas Covers
* Induction Heating Coils and Blankets, Cables, and
Non-Electronic Controls
* M-Guns
* MIG Guns, Subarc (SAW) Torches, and External
Cladding Heads
* Remote Controls and RFCS-RJ45
* Replacement Parts (No labor)
* Spoolmate Spoolguns
Miller’s True Blue Limited Warranty shall not apply to:
1. Consumable components; such as contact tips,
cutting nozzles, contactors, brushes, relays, work
station table tops and welding curtains, or parts that
fail due to normal wear. (Exception: brushes and
relays are covered on all engine-driven products.)
2. Items furnished by Miller, but manufactured by others,
such as engines or trade accessories. These items are
covered by the manufacturer’s warranty, if any.
3. Equipment that has been modified by any party other than
Miller, or equipment that has been improperly installed,
improperly operated or misused based upon industry
standards, or equipment which has not had reasonable
and necessary maintenance, or equipment which has
been used for operation outside of the specifications for
the equipment.
MILLER PRODUCTS ARE INTENDED FOR COMMERCIAL AND
INDUSTRIAL USERS TRAINED AND EXPERIENCED IN THE USE
AND MAINTENANCE OF WELDING EQUIPMENT.
The exclusive remedies for warranty claims are, at Millers option,
either: (1) repair; or (2) replacement; or, if approved in writing by
Miller, (3) the pre-approved cost of repair or replacement at an
authorized Miller service station; or (4) payment of or credit for the
purchase price (less reasonable depreciation based upon use).
Products may not be returned without Miller’s written approval.
Return shipment shall be at customer’s risk and expense.
The above remedies are F.O.B. Appleton, WI, or Miller’s authorized
service facility. Transportation and freight are the customer’s
responsibility. TO THE EXTENT PERMITTED BY LAW, THE
REMEDIES HEREIN ARE THE SOLE AND EXCLUSIVE
REMEDIES REGARDLESS OF THE LEGAL THEORY. IN NO
EVENT SHALL MILLER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING LOSS OF PROFIT) REGARDLESS OF THE LEGAL
THEORY. ANY WARRANTY NOT PROVIDED HEREIN AND ANY
IMPLIED WARRANTY, GUARANTY, OR REPRESENTATION,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE, ARE EXCLUDED AND DISCLAIMED BY MILLER.
Some US states do not allow limiting the duration of an implied
warranty or the exclusion of certain damages, so the above
limitations
may not apply to you. This warranty provides specific
legal rights, and other rights may be available depending on your
state. In Canada, some provinces provide additional warranties or
remedies, and to the extent the law prohibits their waiver, the
limitations set out above may not apply. This Limited Warranty
provides specific legal rights, and other rights may be available, but
may vary by province.
Warranty Questions?
Call
1-800-4-A-MILLER
for your local
Miller distributor.
miller_warr 2018-01
Your distributor also gives
you ...
Service
You always get the fast,
reliable response you
need. Most replacement
parts can be in your
hands in 24 hours.
Support
Need fast answers to the
tough welding questions?
Contact your distributor.
The expertise of the
distributor and Miller is
there to help you, every
step of the way.
ORIGINAL INSTRUCTIONS PRINTED IN USA 2018 Miller Electric Mfg. LLC 201801
Miller Electric Mfg. LLC
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
International HeadquartersUSA
USA Phone: 920-735-4505 Auto-Attended
USA & Canada FAX: 920-735-4134
International FAX: 920-735-4125
For International Locations Visit
www.MillerWelds.com
Model Name Serial/Style Number
Purchase Date (Date which equipment was delivered to original customer.)
Distributor
Address
City
State Zip
Please complete and retain with your personal records.
Always provide Model Name and Serial/Style Number.
Contact a DISTRIBUTOR or SERVICE AGENCY near you.
Welding Supplies and Consumables
Options and Accessories
Personal Safety Equipment
Service and Repair
Replacement Parts
Training (Schools, Videos, Books)
Technical Manuals (Servicing Information
and Parts)
Circuit Diagrams
Welding Process Handbooks
Contact the Delivering Carrier to:
For Service
Owner’s Record
File a claim for loss or damage during
shipment.
For assistance in filing or settling claims, contact
your distributor and/or equipment manufacturer’s
Transportation Department.
Contact your Distributor for:
To locate a Distributor or Service Agency visit
www.millerwelds.com or call 1-800-4-A-Miller
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Miller ARCSTATION WELD TABLE - 60SX Le manuel du propriétaire

Catégorie
Système de soudage
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues