Philips BRI945/00 Manuel utilisateur

Lumea

BRI947

2a

7

3

4

6

5

14

15

16

2b

3

4

1

8

12

11

9

10

13

17

18

2c

3

4

2d

3

4

3

Skin tone table / Hauttontabelle /

Cuadro de tono de piel /

Tableau de teint de peau /

Tabella del tono della pelle / Huidtinttabel /

Tabela de tons de pele

Hair color table / Haarfarbentabelle /

Cuadro de color del pelo /

Tableau de couleur de cheveux /

Tabella dei colori dei peli / Haarkleurtabel /

Tabela de tons de pelo

2

BRI947_Emerald_SkintoneTable_A5_fc.pdf 1 16-10-18 08:53

English 6

Deutsch 30

Español 59

Français 86

Italiano 114

Nederlands 141

Português 167

English

Contents

Welcome_______________________________________________________________________________________________ 7

Device overview________________________________________________________________________________________ 7

Intended use___________________________________________________________________________________________ 8

Who should not use Lumea? Contraindication_______________________________________________________ 8

General conditions_____________________________________________________________________________________ 8

Medications/History___________________________________________________________________________________ 9

Pathologies/Disorders_________________________________________________________________________________ 10

Skin condition__________________________________________________________________________________________ 10

Location/areas_________________________________________________________________________________________ 11

Important_______________________________________________________________________________________________ 12

Danger_________________________________________________________________________________________________ 12

Warning________________________________________________________________________________________________ 12

To prevent damage____________________________________________________________________________________ 13

Caution_________________________________________________________________________________________________ 14

Electromagnetic fields (EMF)__________________________________________________________________________ 15

How IPL works_________________________________________________________________________________________ 15

Suitable body hair colors______________________________________________________________________________ 16

Recommended treatment schedule__________________________________________________________________ 16

Initial phase____________________________________________________________________________________________ 16

Touch-up phase_______________________________________________________________________________________ 16

Treatment time per area_______________________________________________________________________________ 17

What to expect_________________________________________________________________________________________ 17

After initial treatment phase __________________________________________________________________________ 17

During touch-up treatment phase____________________________________________________________________ 18

Using your Lumea Prestige before and after tanning________________________________________________ 18

Tanning with natural or artificial sunlight_____________________________________________________________ 18

Tanning with creams___________________________________________________________________________________ 18

Before you use your Lumea Prestige__________________________________________________________________ 18

Pretreating your skin___________________________________________________________________________________ 18

Skin test________________________________________________________________________________________________ 19

Using your Lumea Prestige____________________________________________________________________________ 19

Skin tone sensor_______________________________________________________________________________________ 19

Attachments___________________________________________________________________________________________ 20

Body Attachment______________________________________________________________________________________ 20

Facial Attachment_____________________________________________________________________________________ 20

Armpit attachment_____________________________________________________________________________________ 20

Bikini attachment______________________________________________________________________________________ 21

Selecting the right light intensity______________________________________________________________________ 21

Handling the device___________________________________________________________________________________ 22

Two treatment modes: Stamp & Flash and Slide & Flash_____________________________________________ 23

After use________________________________________________________________________________________________ 24

Common skin reactions________________________________________________________________________________ 24

Rare side effects_______________________________________________________________________________________ 24

Aftercare_______________________________________________________________________________________________ 25

Cleaning & storage_____________________________________________________________________________________ 26

Warranty and support_________________________________________________________________________________ 26

6

English

Recycling_______________________________________________________________________________________________ 26

Technical specifications_______________________________________________________________________________ 26

Troubleshooting_______________________________________________________________________________________ 27

Welcome

Welcome to the beauty world of Lumea! You are only a few weeks away

from silky-smooth skin.

Philips Lumea uses Intense Pulsed Light (IPL) technology, known as one of

the most effective methods to continuously prevent hair regrowth. In close

collaboration with skin experts we adapted this light-based technology,

originally used in professional beauty salons, for easy and effective use in

the safety of your home. Philips Lumea is gentle and offers convenient and

effective treatment at a light intensity that you find comfortable. Unwanted

hairs are finally a thing of the past. Enjoy the feeling of being hair-free and

look and feel amazing every day.

To fully benefit from the support that Philips offers, register your product at

www.philips.com/welcome. For further information, please go to

www.philips.com/lumea to find our experts' advice, tutorial videos and

FAQs and make the most of your Lumea.

Note: Keep these instructions with your product at all times.

Device overview

1 Light exit window with integrated UV filter

2 Attachments

a Body attachment

b Armpit attachment

c Bikini attachment

d Facial attachment

3 Skin tone sensor

4 Integrated safety system

5 Reflector inside the attachment

6 Electronic contacts

7 Opening for electronic contacts

8 Flash button

9 On/off button

10 Confirmation button

11 Toggle buttons

12 Intensity light indicators

13 Setting advice button

14 Ready to flash indicator’

15 Air ventilation slots

16 Device socket

17 Adapter

18 Small plug

19 Luxurious pouch (not shown)

7

English

Intended use

Philips Lumea Prestige is an Over-The-Counter device intended for the

removal of unwanted hair. Philips Lumea Prestige can be used by persons in

the age range of 18-65 with Fitzpatrick skin types I to V. The Lumea Prestige

can be used on: face (below the cheekbone), legs, bikini, axilla (underarm).

Philips Lumea Prestige is not designed for everyone. Please read and

consider the information in the Contraindications and Warning chapters

carefully to determine if you can use the device and on which body parts

you can use it safely.

Who should not use Lumea? Contraindication

General conditions

-

Never use the device if you have skin type VI

(You rarely to never sunburn, very dark tanning).

In this case you run a high risk of developing skin

reactions, such as hyperpigmentation and

hypopigmentation, strong redness or burns.

Note: To check if your skin type allows usage of

the device, consult the skin tone table with

number 2 on the foldout page.

-

Never use the device if you are pregnant or

breastfeeding as the device was not tested on

pregnant or breastfeeding women.

-

Never use the device if you have any active

implants such as a pacemaker, neurostimulator,

insulin pump etc.

8

English

Medications/History

Never use the device if you take any of the

medications listed below:

-

If your skin is currently being treated with or has

recently been treated in the past week with

Alpha-Hydroxy Acids (AHAs), Beta-Hydroxy

Acids (BHAs), topical isotretinoin and azelaic

acid.

-

If you have taken any form of isotretinoin

Accutane or Roaccutane in the last six months.

This treatment can make skin more susceptible

to tears, wounds and irritations.

-

If you are taking photosensitizing agents or

medications, check the package insert of your

medicine and never use the device if it is stated

that it can cause photo-allergic reactions,

photo-toxic reactions or if you have to avoid sun

when taking this medicine.

-

If you take anticoagulation medications,

including heavy use of aspirin, in a manner which

does not allow for a minimum 1-week washout

period prior to each treatment.

Never use the device:

-

If you have received radiation therapy or

chemotherapy within the past 3 months.

-

If you are on painkillers which reduce the skin's

sensitivity to heat.

-

If you take immunosuppressive medications.

-

If you have had surgery in the areas to be

treated in the last 3 weeks.

9

English

Pathologies/Disorders

Never use the device:

-

If you have diabetes or other systemic or

metabolic diseases.

-

If you have congestive heart disease.

-

If you have a disease related to photosensitivity,

such as polymorphic light eruption (PMLE), solar

urticaria, porphyria etc.

-

If you have a history of collagen disorder,

including a history of keloid scar formation or a

history of poor wound healing.

-

If you have epilepsy with flashlight sensitivity.

-

If your skin is sensitive to light and easily

develops a rash or an allergic reaction.

-

If you have a skin disease such as active skin

cancer, you have a history of skin cancer or any

other localized cancer in the areas to be treated.

-

If you have a history of vascular disorder, such as

the presence of varicose veins or vascular

ectasia in the areas to be treated.

-

If you have any bleeding disorder.

-

If you have a history of immunosuppressive

disease (including HIV infection or AIDS).

Skin condition

Never use the device:

-

If you have infections, eczema, burns,

inflammation of hair follicles, open lacerations,

abrasions, herpes simplex (cold sores), wounds

or lesions and haematomas in the areas to be

treated.

-

On irritated (red or cut), sunburned, recently

tanned or fake-tanned skin.

10

English

-

On the following areas without consulting your

doctor first: moles, freckles, large veins, darker

pigmented areas, scars and skin anomalies. This

can result in a burn and a change in skin color,

which makes it potentially harder to identify

skin-related diseases.

-

On following areas: warts, tattoos or permanent

make-up.

Location/areas

Never use the device on the following areas:

-

Around the eyes and on or near the eyebrows.

-

On lips, nipples, areolas, labia minora, vagina,

anus and the inside of the nostrils and ears.

-

If you have had surgery in the areas to be

treated in the last three weeks.

-

Men must not use the device on the face and

neck including all beard-growing areas, nor on

the whole genital area.

-

On areas where you use long-lasting

deodorants. This can result in skin reactions.

-

Over or near anything artificial like silicone

implants, subcutaneous injection ports (for

instance an insulin dispenser) or piercings.

Note: This list is not exhaustive. If you are not sure

whether you can use the device, we advise you to

consult your doctor.

11

English

Important

Danger

-

Keep the device and the adapter dry.

-

If the device is broken, do not touch any inner

part to avoid electric shock.

-

Water and electricity are a dangerous

combination. Do not use this appliance in wet

surroundings (e.g. near a filled bath, a running

shower or a filled swimming pool).

Warning

-

This device is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have

been given supervision or instruction concerning

use of the device by a person responsible for

their safety.

-

Children should be supervised to ensure that

they do not play with the device.

-

Always check the device before you use it. Do

not use the device or adapter if it is damaged.

-

The external flexible cable or cord of this

transformer cannot be replaced; if the cord is

damaged, the transformer shall be scrapped.

-

Do not use the device if the UV filter of the light

exit window and/or attachment is broken.

-

Do not use any pencil or pen to mark the areas

to be treated. This may cause burns on your skin.

12

English

-

If you have a dark-colored skin, be careful with

treating a darker area immediately after a lighter

area. The skin tone sensor may not immediately

block the treatment on the darker body area.

-

Hair removal by intense pulsed light sources can

cause increased hair growth in some individuals.

Based upon currently available data, the highest

risk groups for this response are females of

Mediterranean, Middle Eastern and South Asian

heritage treated on the face and neck.

-

Adapter, light exit window and the filter of the

attachments can become very hot after usage.

Do not touch the adapter, inner part of the light

exit window and the filter or the inner part of the

attachments without having these cool down.

-

This device has a detachable power adapter.

Only use the adapter provided with this device.

The reference number (AD2069x20020HF) can

be found on your device. The 'x' in this number

refers to the plug type for your country.

-

For hygienic reasons, the device should only be

used by one person.

Note: If you notice a skin tone change from last

treatment (e.g. due to tanning), we recommend

you to perform a skin test and to wait 30 minutes

before your next treatment.

To prevent damage

-

Store the device in a dust free and dry place.

-

Do not expose the device to temperatures lower

than 5°C or higher than 35°C during use.

13

English

Caution

-

This device is only intended for removing

unwanted body hair from areas below the

cheekbones. Do not use it for any other

purpose.Doing so may expose you to a

hazardous situation.Men most not use it on the

face and neck including all beard-growing areas

and the whole genital area.

-

This device is not washable. Never immerse the

device in water and do not rinse it under the tap.

-

Use the device only at settings suitable for your

skin type. Use at higher settings than those

recommended can increase the risk of skin

reactions and side effects.

-

Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the device.

-

The scattered light produced by the device is

harmless to your eyes. Do not look at the flash

while using the device. It is not necessary to

wear goggles during use. Use the device in a

well-lit room so that the light is less glaring to

your eyes.

-

Always return the device to a service center

authorized by Philips for examination or repair.

Repair by unqualified people could cause an

extremelyhazardous situation for the user.

-

Never leave the device unattended when it is

switched on. Always switch off the device after

use.

-

Do not use the device if any of the conditions

mentioned in chapter ‘Who should not use

Lumea? Contraindication' apply to you.

14

English

-

Tanning with natural or artificial sunlight might

influence the sensitivity and color of your skin.

Perform a skin test to determine the appropriate

light intensity setting.

-

Before you use Lumea, you should clean your

skin and make sure it is hair-free, entirely dry

and free from oily substances.

-

Do not treat the same skin area more than once

during a session. This does not improve the

effectiveness of the treatment, but increases the

risk of skin reactions.

-

Lumea should never be painful. If you

experience discomfort, reduce the light intensity

setting.

Electromagnetic fields (EMF)

This Philips device complies with all applicable standards and regulations

regarding exposure to electromagnetic fields.

How IPL works

1

With Intense Pulsed Light technology, gentle pulses of light are applied to

the skin and absorbed by the hairroot. The lighter the skin and the darker

the hair, the better the pulses of light are absorbed.

2

The pulses of light stimulate the hair follicle to go into a resting phase. As a

consequence, the hair sheds naturally and hair regrowth is prevented.

15

English

3

The cycle of hair growth consists of different phases. IPL technology is only

effective when the hair is in its growing phase. Not all hairs are in the

growing phase at the same time. This is why we recommend you to follow

the initial treatment phase (4-5 treatments, every treatment 2 weeks apart)

and then the follow-up treatment phase (touch-ups every 4-8 weeks) to

make sure all hairs are effectively treated in the growing phase.

Tip: To assure long lasting hair removal, touch-ups every 4 weeks are

recommended.

Note: Treatment with Lumea is not effective if you have light blond, grey, red

or white hairs as light hairs do not absorb enough light. Below you can see

the hair colors for which Lumea is suitable and effective.

Suitable body hair colors

Note: To check if your body hair color allows usage of the device, consult the

hair color table with number 3 on the foldout page.

Recommended treatment schedule

Initial phase

21 3 4 5 6 7 8

For the first 4 to 5 treatments, we advise you to use Lumea Prestige once

every two weeks to ensure that all hairs are treated.

Note: Replacing one of the IPL treatments with another hair removal

method (waxing, epilating, etc.) will not help to reach the desired hair

reduction.

Note: If you want to remove hairs in between the Lumea treatments, you

can use your normal hair removal method.

Touch-up phase

20

2012

After the initial treatment phase (4-5 treatments), we recommend touch-ups

every 4-8 weeks, when you see hairs growing back. This to maintain results

and enjoy smooth skin for months. The time between treatments may vary

based on your individual hair regrowth and also across different body areas.

Tip: You can write the treatment schedule in your agenda to remind yourself

of the treatments so you will not forget.

Note: Using the device more often does not enhance the effectiveness.

16

English

Treatment time per area

2

1

41

1

1 3

1.5 min.

2 min.

1

2

3 4

6.5 min.4.5 min.

1.5 min.

What to expect

After initial treatment phase

-

Afterthe first treatment, it can take 1 to 2 weeks for the hairs to fall out. In

the first weeks following the initial treatments, you still see some hairs

growing.These are likely to be hairs that were not in their growing phase

during the first treatments.

-

After 2-3 treatments, you should see a noticeable reduction in hair

growth. However, to effectively treat all hairs, it is important to keep on

treating according to the recommended treatment schedule.

17

English

-

After 4-5 treatments, you should see a significant reduction of hair

growth in the areas that you treated with Lumea. A reduction of hair

density should be visible as well.

During touch-up treatment phase

-

Keep on treating with frequent touch-ups (every 4-8 weeks) to maintain

the result.

Using your Lumea Prestige before and after

tanning

Tanning with natural or artificial sunlight

Intentionally exposing your skin to natural or artificial sunlight with the aim

of developing a tan influences the sensitivity and color of your skin.

Therefore the following is important:

-

After each treatment, wait at least 48 hours before tanning. Even after 48

hours, make sure that the treated skin does not show any redness from

the treatment anymore.

-

In case of exposing your skin to the sun (without tanning intentionally) in

the 48 hours after treatment, use a sunblock SPF 50+ on the treated

areas. After this period, you can use a sunblock SPF 30+ for two weeks.

-

After tanning, wait at least 2 weeks before you use Lumea.

-

After recent tanning, perform a skin test to determine the appropriate

light intensity setting. For instructions see chapter 'Skin test'.

-

Do not use Lumea on sunburned body areas.

Note: Occasional and indirect sun exposure does not qualify as tanning.

Tanning with creams

If you have used an artificial tanning lotion, wait until the artificial tan has

disappeared completely before you use the device.

Before you use your Lumea Prestige

Pretreating your skin

Before you use Lumea, you should pretreat your skinby removing hairs on

the surface of your skin. This allows the light to beabsorbed by the hair

parts below the skin surface to ensure effective treatment. You can either

shave, short-trim, epilate or wax. Do not use depilatory creams, as chemicals

may cause skin reactions.

18

English

If you choose to wax, please wait 24 hours before using Lumea to let your

skin rest. We recommend that you take a shower before the treatment to

ensure that all possible residue of wax has been removed from your skin.

1 Pretreat the areas you intend to treat with Lumea.

2 Clean your skin and make sure it is hair-free, entirely dry and free from

oily substances.

Note: if shaving causes skin irritation, we advise you not to use the device

until skin irritation is resolved.

Skin test

When you use Lumea Prestige for the first time or after recent tanning,

perform a skin test on each area to be treated. The skin test is necessary to

check your skin's reaction to the treatment and to determine the correct

light intensity setting for each bodyarea.

1 Attach the right attachment for the area you want to treat. See chapter:

'Attachments'.

Note: do not try the device on difficult or sensitive areas (ankle and bony

area).

2 Turn on the device. Make sure that you select setting 1.

3 Place the device at a 90° angle on the skin so that the integrated safety

system is in contact with your skin.

The integrated safety system prevents unintentional flashing without skin

contact.

4 Press the flash button to release a flash.

5 Slide the device over the skin to the next area to be treated.

6 Increase the setting by one level, apply a flash and slide the device to the

next area. Repeat this for all levels, as long as each level still feels

comfortable. See the table in: 'Selecting the right light intensity'.

7 After the skin test, wait 24 hours and check your skin for any reaction. If

your skin shows reactions, choose the highest setting that did not result

in any skin reaction for subsequent use.

Using your Lumea Prestige

Skin tone sensor

The Lumea Prestige has integrated skin tone sensor which measures the

skin tone at the beginning of each session and occasionally during the

session. If it detects a skin tone that is too dark for treatment with

Lumea,the 'ready to flash' light starts blinking orange and the device

automatically disables to prevent you from developing skin reactions. This

means that it does not flash when you press the flash button.

19

English

Attachments

For optimal results and safety it is important to change attachments per

body area. Lumea Prestige offers full body specific treatment having up to

four different tailored attachments.

To place the attachment, simply snap it onto the light exit window.

To remove the attachment, pull it off the light exit window.

Note: The device might not work any more and show an error when there is

dirt on the attachment connector. Clean the contact leads when this occurs.

Body Attachment

The body attachment has the largest treatment window and a curved-in

design to cover effectively and treat areas below the neckline. Especially

large areas such as legs, arms and stomach.

Facial Attachment

The facial attachment has a precise flat design with extra integrated filter for

safe and precise treatment on the sensitive skin on upper lip, chin and

sideburns.

Note:

- Do not treat your eyebrows with Lumea.

- When you treat the area above your upper lip, be careful that you do not

flash on the lip.

Armpit attachment

The armpit attachment has a specifically curved-out design to treat hard to

reach armpit hairs.

20

English

Bikini attachment

The bikini attachment has a specialized design for effective treatment of

bikini areas. It has a curved-out design with transparent bikini filter. Hair in

this area tends to be typically thicker and stronger than leg hair, therefore

the bikini area attachment has a special filter for treating the coarser hair in

the bikini area.

Selecting the right light intensity

Lumea provides 5 different light intensities and advises you on the right

setting you should use based on your skin tone. You will always be able to

change to a light intensity setting you find comfortable.

1 Press the on/off button to turn on the device. The device starts to

operate at light intensity setting 1.

Note: To adjust the light intensity setting manually without using the skin

advice, use the toggle button until you have reached the required setting.

The corresponding intensity light level lights up white.

2 Press the SmartSkin sensor ( ) and put the device to your skin.

3 After the device scanned your skin, the suggested intensity lights will

blink white to indicate which intensities you can use based on your skin

tone.

4 Press the confirmation button (

) to confirm that you want to use the

suggested setting advice to start using the device.

Philips Lumea will automatically use the highest suggested intensity,

indicated by a continuous lighting led indicator.

Lumea gives you the freedom to select the light intensity that you find

most comfortable. If you want to set the light intensity setting manually,

please consult the table below. This table shows settings that for the

majority of users provides a comfortable, but still effective setting.

5 Using Lumea should never be painful. If you experience discomfort,

reduce the light intensity setting. You can do this by using the up-down

buttons.

Note: The device automatically disables when your skin tone is too dark

(skin type VI), to prevent you from developing skin reactions. The ‘ready

to flash’ light will blink orange to indicate if the skin tone is too dark.

6 After moving to another body area or recent tanning, perform a skin test

to determine the right light intensity setting. To re-activate the setting

advice feature, press the magnifying glass symbol.

Note: Since body areas might differ in skin color, you need to select the

right setting for each body area separately.

21

English

La page charge ...

Philips BRI945/00 Manuel utilisateur

Philips BRI945/00 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents