Philips SC2001/00 Manuel utilisateur

Marque: Philips

Modèle: SC2001/00

Catégorie: Appareils de soins de la peau

Taper: Manuel utilisateur

Ce manuel convient également à

SC2001/01

www.philips.com/welcome

SC2001/01

ENGLISH 6

FRANÇAIS 28

Table of contents

Introduction 7

Benefits 7

Intense Pulsed Light (IPL) technology for home use 7

Effective hair regrowth prevention for everyday smoothness 7

Gentle treatment, even on sensitive body areas 8

Cordless operation for maximum freedom and flexibility 8

Lamp does not require replacement 8

How Philips’ Intense Pulsed Light technology works 8

Hair growth 8

Working principle 8

General description 8

Important 9

Danger 9

Warning 9

To prevent damage: 10

Caution 10

Keep the following things in mind to avoid compromising the lifetime of

your Philips Lumea: 10

For whom is Philips Lumea not suitable? 10

Contraindications 10

Never use the appliance if you are pregnant or breast feeding. 10

Never use the appliance if you have an unsuitable skin and/or hair

colour, i.e.: 10

Never use the appliance if you suffer from any of the diseases listed

below, i.e.: 11

Never use the appliance if you take any of the medications listed below,

i.e.: 11

Never use the appliance on the following areas: 11

Never use the appliance on sunburnt, recently tanned (last 48 hours)

or fake-tanned skin: 12

Electromagnetic fields (EMF) 12

Charging 12

Preparing for use 13

Preparing treatment areas 13

Setting the light intensity 13

Recommended light intensities (1-5) 14

Important 14

Tanning advice 14

Using the appliance 15

First use and skin test 15

Subsequent use 16

Guidelines for treatment 18

Average treatment time 18

Using the appliance on the legs 18

Using the appliance in the bikini area 19

Using the appliance on the underarms 19

How to achieve optimal results 19

Maintenance phase 19

Possible side effects and skin reactions 19

After use 20

Cleaning and maintenance 20

ENGLISH

Storage 21

Replacement 21

Replacement parts 21

Environment 22

Removing the rechargeable batteries 22

Guarantee and service 23

Technical specifications 23

Troubleshooting 24

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit

from the support that Philips offers, register your product at www.philips.

com/lumea.

Light-based hair removal is one of the most effective methods to

treat unwanted body hair with longer-lasting results. It is different from

current home hair removal methods because it significantly reduces

hair regrowth. Philips has been investigating this method together with

leading dermatologists for over 10 years. You can now use this innovative

technology comfortably in the privacy of your own home, whenever and

wherever you want.

This appliance has been specifically designed and optimised for use by

women, but can be used by men as well.

It is intended for removing body hair on areas mentioned below:

- Underarms

- Arms

- Stomach

- Bikini area

- Legs

Do not use Philips Lumea on the face.

Philips Lumea is designed for use by one person only.

For more information about Philips Lumea, see www.philips.com/lumea.

Check our homepage regularly for updates.

Benefits

This appliance provides the following benefits:

Intense Pulsed Light (IPL) technology for home use

Philips Lumea uses a light-based technology called ‘Intense Pulsed Light’

(IPL). IPL is also used in the professional beauty market for hair removal

and has been in use for the last fifteen years. Philips Lumea now brings this

innovative technology to the comfort of your home.

Effective hair regrowth prevention for everyday smoothness

This method provides you with long-lasting hair regrowth prevention and

silky-smooth skin. Our studies have shown a significant hair reduction

already after two treatments. Optimal results were generally achieved after

four to five treatments. A reduction in hair density is visible from treatment

to treatment. How fast the effect becomes visible and how long the results

last varies from person to person. For more information, see section ‘How

to achieve optimal results’ in chapter ‘Using the appliance’.

ENGLISH 7

Gentle treatment, even on sensitive body areas

Philips Lumea has been developed in close cooperation with leading

dermatologists for an effective and gentle treatment, even on the most

sensitive body areas.

Cordless operation for maximum freedom and flexibility

Because the appliance runs on rechargeable batteries, it is portable and can

be used anywhere.

Lamp does not require replacement

Philips Lumea is equipped with a high performance lamp which does

not require replacement. This lamp can generate over 80,000 flashes and

should enable you to continuously maintain results for more than 5 years*

while saving money on expensive replacement lamps.

*Based on average usage scenario and recommended treatment regime for

one user.

How Philips’ Intense Pulsed Light technology works

Hair growth

Hair growth rates differ from person to person, depending on age,

metabolism and other factors. However, everyone’s hair normally grows in

3 phases.

1 Growing phase (anagen phase)

The hair grows actively from the root. In this phase the concentration of

melanin is highest. Melanin is responsible for the pigmentation of the hair.

Melanin concentration is also the determining factor for the efficacy of this

method. Only hairs in the growing phase are susceptible to treatment with

light.

2 Degradation phase (catagen phase)

Hair growth stops and the root shrinks before the hair sheds.

3 Resting phase (telogen phase)

The old hair separates from its hair follicle and sheds. The follicle remains

at rest until the biological clock tells it to become active again and grow a

new hair.

Working principle

The appliance works by heating up the hair and root beneath the skin.

The melanin in the hair and hair root absorbs the released light pulses. The

darker the colour of the hair, the more light can be absorbed. This process

stimulates the hair to go into the resting phase.

The hair now sheds naturally and the hair growth is inhibited. Hairs can

take one or two weeks to shed. Optimal hair removal cannot be obtained

with a single session, since only hairs in the growing phase are susceptible

to treatment with light. During a treatment, hairs on the treated area are

usually in different stages of the hair growth cycle. To effectively treat all

hairs you have to repeat the treatment every two weeks for a few times.

An integrated optical filter ensures that no UV light reaches the skin

and guarantees that the appliance is safe for the skin.

General description (Fig. 2)

A Light exit window with integrated UV filter

B Body Attachment

C Metallic frame inside the attachment

ENGLISH8

D Safety system (safety ring with contact switches)

E Flash button

F Intensity lights (1- 5)

G % Intensity increase button

H ^ Intensity decrease button

I Charging light and battery low indication

J On/off button

K ’Ready to flash’ light

L Appliance socket

M Adapter

N Small plug

O Air vents

Also included: pouch and cleaning cloth

Important

Read this user manual carefully before you use the appliance and save it for

future reference.

Danger

- Water and electricity are a dangerous combination. Do not use this

appliance in wet surroundings (e.g. near a filled bath, a running shower

or a filled swimming pool).

- Keep the appliance and the adapter dry.

- If the appliance is broken, do not touch any inner part to avoid electric

shock.

- Never insert any objects into the appliance.

Warning

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, unless they have

been given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- The appliance is not intended for children under the age of 15 years.

Teenagers aged between 15 and 18 years can use the appliance with

the consent and/or assistance of their parents or the persons who have

parental authority over them. Adults from 19 years and older can use

the appliance freely.

- Only charge the appliance with the adapter supplied.

- Do not use the appliance or the adapter if it is damaged.

- The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

- If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

- Do not use the appliance if the UV filter of the light exit window is

broken.

ENGLISH 9

To prevent damage:

- Make sure nothing obstructs the air flow through the ventilation slots.

- Never subject the appliance to heavy shocks and do not shake or drop

it.

- If you take the appliance from a very cold environment to a very warm

environment or vice versa, wait approximately 3 hours before you use

it.

- Store the appliance in the pouch so that it does not become dusty.

- Never leave the appliance unattended when it is switched on. Always

switch off the appliance after use.

- Do not expose the appliance to direct sunlight or UV light for several

hours.

- Do not flash against any other surface than the skin. This can cause

severe damage to the attachment and/or the light exit window. Only

flash when the appliance is in contact with skin.

Caution

- This appliance is only intended for removing unwanted body hair from

areas below the neck. Do not use it for any other purpose.

- Use this appliance only at settings suitable for your skin type. Use at

higher settings than those recommended can increase the risk of skin

reactions and side effects.

Keep the following things in mind to avoid compromising the

lifetime of your Philips Lumea:

- Do not expose the appliance to temperatures lower than 15°C or

higher than 35°C during use.

- The appliance is equipped with a built-in overheat protection. If the

appliance overheats, it does not flash. Do not switch off the appliance,

but let it cool down for approx. 15 minutes before you continue with

your treatment.

- Always return the appliance to a service centre authorised by Philips

for examination or repair. Repair by unqualified people could cause an

extremely hazardous situation for the user.

- Never use the appliance in any of the cases mentioned in the section

‘Contraindications’.

For whom is Philips Lumea not suitable?

Philips Lumea is not designed for everyone. If any of the following is true

for you, then this appliance is not suitable for you to use!

Contraindications

Never use the appliance if you are pregnant or breast feeding.

Never use the appliance if you have an unsuitable skin and/or

hair colour, i.e.:

- If your natural hair colour in the treatment areas is light blond, white,

grey or red.

- If you are of skin type VI (you rarely or never get sunburnt and you tan

very darkly; your skin colour is brownish black or darker). In this case

you run a high risk of developing skin reactions, such as strong redness,

burns or discolourations, when you use Philips Lumea.

ENGLISH10

Never use the appliance if you suffer from any of the diseases

listed below, i.e.:

- If you have a skin disease such as active skin cancer, you have a history

of skin cancer or any other localised cancer in the areas to be treated.

- If you have pre-cancerous lesions or multiple atypical moles in the areas

to be treated.

- If you have a history of collagen disorder, including a history of keloid

scar formation or a history of poor wound healing.

- If you have a history of vascular disorder, such as the presence of

varicose veins or vascular ectasia in the areas to be treated.

- If your skin is sensitive to light and easily develops a rash or an allergic

reaction.

- If you have infections, eczema, burns, inflammation of hair follicles,

open lacerations, abrasions, herpes simplex, wounds or lesions and

haematomas in the areas to be treated.

- If you have had surgery in the areas to be treated.

- If you have epilepsy with flashlight sensitivity.

- If you have diabetes, lupus erythematodes, porphyria or congestive

heart disease.

- If you have any bleeding disorder.

- If you have a history of immunosuppressive disease (including HIV

infection or AIDS).

Never use the appliance if you take any of the medications

listed below, i.e.:

- If your skin is currently being treated with or has recently been treated

with Alpha-Hydroxy Acids (AHAs), Beta- Hydroxy Acids (BHAs),

topical isotretinoin and azelaic acid.

- If you have taken any form of isotretinoin Accutane

or Roaccutane

in the last six months.This treatment thins the skin and can therefore

make it more susceptible to tears, wounds and irritations.

- If you are on painkillers, which reduce the skin’s sensitivity to heat.

- If you are taking photosensitising agents or medications, check the

package insert of your medicine and never use the appliance if it is

stated that it can cause photo-allergic reactions, photo-toxic reactions

or if you have to avoid sun when taking this medicine.

- If you take anticoagulation medications, including heavy use of aspirin, in

a manner which does not allow for a minimum 1-week washout period

prior to each treatment.

- If you take immunosuppressive medications.

Never use the appliance on the following areas:

- In the face.

- On nipples, areolas, labia minora, vagina, anus and the inside of the

nostrils and ears.

- Men must not use it on the scrotum and face.

- Over or near anything artificial like silicone implants, pacemakers,

subcutaneous injection ports (insulin dispenser) or piercings.

- On moles, freckles, large veins, darker pigmented areas, scars, skin

anomalies without consulting your doctor. This can result in a burn and

a change in skin colour, which makes it potentially harder to identify

skin-related diseases (e.g. skin cancer).

- On warts, tattoos or permanent make-up. This can result in a burn and

a change in skin colour.

ENGLISH 11

- On areas, where you use long-lasting deodorants. This can result in skin

reactions. See chapter ‘Using the appliance’, section ‘Possible side effects

and skin reactions’.

Never use the appliance on sunburnt, recently tanned (last 48

hours) or fake-tanned skin:

- All types of tanning can influence the safety of the treatment. This

applies to exposure to natural sunlight as well as artificial tanning

methods, such as tanning lotions, tanning appliances etc. If you are

tanned or are planning to tan, see chapter ‘Preparing for use’, section

‘Tanning advice’.

Note: This list is not exhaustive. If you are not sure whether you can use the

appliance we advise you to consult a doctor.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic

fields (EMF). If handled properly and according to the instructions in this

user manual, the appliance is safe to use based on scientific evidence

available today.

Charging

Fully charge the batteries before you use the appliance for the first time

and when the batteries are empty. Fully charging the batteries takes up to 1

hour and 40 minutes.

Charge the appliance when the charging light lights up orange during use to

indicate that the battery is low. When this happens, the remaining capacity

is at least 30 flashes.

Fully charged batteries provide at least 320 flashes at light intensity 5.

Fully charge the appliance every 3 to 4 months, even if you do not use the

appliance for a longer time.

Charge the appliance in the following way:

1 Switch off the appliance.

2 Insert the small plug into the appliance and put the adapter in the

wall socket.

, The charging light flashes green to indicate that the appliance is

charging.

, When the batteries are fully charged, the charging light

lights up green continuously.

Notes:

- The adapter and the appliance feel warm during charging. This is

normal.

- You cannot use the appliance during charging.

- This appliance is equipped with battery-overheat protection and does

not charge if the room temperature exceeds 40°C.

Never cover the appliance and adapter during charging.

3 After charging, remove the adapter from the wall socket and pull the

small plug out of the appliance.

ENGLISH12

Preparing for use

For optimal results and greatest effect, prepare the areas on which you

intend to use the appliance in the manner described below.

Preparing treatment areas

1 Shave the areas you intend to treat as long as you still experience

hair regrowth.

Note: If your last depilation method involved removing hairs by the roots (e.g

epilating, waxing etc.), wait until you notice significant hair regrowth before you

use Philips Lumea. Do not use depilatory creams instead of shaving.

Please note that treatment on unshaved or improperly shaved

areas has a number of undesired effects:

- The light exit window and attachment may become contaminated with

stray hairs and dirt. A contaminated light exit window and attachment

can reduce the life and efficacy of the appliance. In addition, burns or

black spots that appear on the light exit window and attachment due

to contamination can cause the treatment to become painful or cause

skin reactions like redness and discolouration.

- Hairs on your skin can burn, which can result in an unpleasant smell.

2 Clean your skin and make sure it is hair-free, entirely dry and

free from oily substances (e.g. present in cosmetic products like

deodorants, lotions, perfumes, tanning creams and sunscreens).

3 Check the appliance, especially the light exit window and attachment,

for trapped hair, dust and fibres. If you see any contamination, clean

the appliance according to the instructions in chapter ‘Cleaning and

maintenance’.

Notes:

- If shaving causes wounds or lesions, your skin may be more sensitive

and the light treatment may sometimes feel uncomfortable.

- Once the hairs stop growing back, which usually happens after 4-5

treatments, you no longer have to shave before you use the appliance.

Setting the light intensity

Philips Lumea is an appliance developed for consumer use at home and

therefore not comparable with professional light-based appliances with

respect to pain sensation. The pulses of light delivered by Philips Lumea

are gentler than those from professional appliances and therefore you can

expect a convenient and effective treatment.

You have to adjust the light intensity to your skin and body hair colour and

to a level you find comfortable.

The recommended light intensities table below helps you to establish the

right light intensity.

1 Consult the table below to determine which light intensities are most

suitable for your skin and body hair colour and to check if this method

is suitable for you (if it is not, this is indicated with x in the table).

2 Each body area and possibly even parts of a body area may require a

separate appropriate light intensity according to the recommended

light intensities table below. The method is more effective at higher

intensities, but you should reduce the light intensity if you experience

any pain or discomfort.

ENGLISH 13

Persons with darker skin run a higher risk of skin irritation because their

skin absorbs more light. Therefore lower intensities are recommended

for persons with darker skin.

The light pulse can feel warm or hot on the skin but should never be

painful. To prevent skin reactions, see chapter ‘Using the appliance’,

section ‘Possible side effects and skin reactions’.

Recommended light intensities (1-5)

In the table below, ‘x’ means that the appliance is not suitable for you.

Skin colour and

characteristics:

White

(always

sunburn,

tanning)

Beige

(easy

sunburn,

minimal

tanning)

Light brown

(sometimes

sunburn, good

tanning)

Mid

brown

(rarely

sunburn,

fast and

good

tanning)

Dark

brown

(rarely

sunburn,

very good

tanning)

Brownish

black and

darker (rarely

to never

sunburn, very

dark tanning)

Body hair colour:

dark blond/light

brown/brown/

dark brown/black

4/5 4/5 4/5 3/4 1/2/3 x

white/grey/red/

light blond

x x x x x x

Important

To check whether Philips Lumea is suitable for you, see section ‘For whom

is Philips Lumea not suitable?’.

If your skin has been exposed to natural sunlight or an artificial tanning

method, it may be darker than during the previous treatment. Check the

table above to determine which settings are suitable for your skin colour.

Tanning advice

Sun exposure before treatment

- Wait at least 48 hours after sunbathing before you use the appliance.

Sunbathing can cause skin to darken (tan) and/or can cause sunburn

(reddening of the skin).

- After these 48 hours, check the skin for any remaining sunburn. Do not

use Philips Lumea as long as sunburn persists.

- When the sunburn has disappeared, perform a skin test (see chapter

‘Using the appliance’, section ‘First use’) on the area to be treated to

determine the appropriate light intensity.

- If your skin is tanned, perform a skin test (see chapter ‘Using the

appliance’, section ‘First use’) on the area to be treated to determine

the appropriate light intensity. A failure to do so causes a risk of

developing skin reactions after treatment with Philips Lumea.

Sun exposure after treatment

- Wait at least 24 hours after treatment before you expose treated

areas to the sun. Even after 24 hours, make sure that the treated skin

does not show any redness from the treatment anymore before you

expose it to the sun.

ENGLISH14

- Cover treated areas when you go out into the sun or use a sunblock

(SPF 30+) in the two weeks after treatment.

- Exposing treated areas to sunlight without protection immediately

after treatment can increase the risk of adverse side effects and skin

reactions. See chapter ‘Using the appliance’, section ‘Possible side effects

and skin reactions’.

Tanning with artificial light

- Follow the instructions in ‘Sun exposure before treatment’ and ‘Sun

exposure after treatment’ above.

Tanning with creams

- If you have used an artificial tanning lotion, wait until the artificial tan

has fully disappeared before you use Philips Lumea.

Note: For more details on unwanted skin reactions, see chapter ‘Using the

appliance’, section ‘Possible side effects and skin reactions’.

Using the appliance

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Setting the light intensity’ to determine which light intensities

are most suitable for your skin and body hair colour. Use the appliance in

a well-lit room; this reduces the perceived brightness of the flash. Shave

the area you intend to treat before you use the appliance (see chapter

‘Preparing for use’, section ‘Preparing treatment areas’).

If the treatment becomes intolerably painful at any point in time, reduce

the light intensity setting until the treatment is comfortable again. If you

notice skin reactions stronger than slight redness, stop the treatment

immediately and read section ‘Possible side effects and skin reactions’ in

this chapter.

First use and skin test

1 Attach the body attachment to the appliance.

The body attachment can be used to treat unwanted body hair on all

body areas below the neck (for exceptions, see chapter ‘Important’, section

‘Contraindications’).

2 Choose an area close to the area you intend to treat.

ENGLISH 15

3 Press the on/off button to switch on the appliance.

, The appliance always starts automatically at the lowest setting.

4 Apply one flash at the lowest recommended intensity for your skin

type (for instructions on how to release a flash, see steps 6 to 9

of section ‘Subsequent use’ in this chapter).

5 As long as it feels comfortable (not painful), increase the setting by

one level within the recommended range for your skin type and

apply one flash for each setting. Do not apply more than one flash on

the same spot.

6 After the skin test, wait for 24 hours and check your skin for

any reaction. If your skin shows reactions, choose the highest setting

that did not result in any skin reaction for subsequent use.

When you use the appliance for the first time, we advise you to perform

a skin test on the area to be treated to check your skin’s reaction to the

treatment and to get accustomed to light-based treatment.

Subsequent use

1 Before every treatment, clean the attachment, the light exit window

and the metallic frame inside the attachment of Philips Lumea. For

more information see chapter ‘Cleaning and maintenance’.

2 Press the on/off button to switch on the appliance.

Note: It is normal that the appliance and the attachment become warm during

use.

3 Start each treatment by selecting the light intensity very carefully,

based on your skin’s sensitivity and on how comfortable treatment

feels.

Your skin may react differently on different days/occasions for a number of

reasons. See section ‘Possible side effects and skin reactions’ in this chapter

for more information.

ENGLISH16

4 Press the % button to increase the intensity. To lower the intensity,

press the ^button.

, Every time you press the button, the corresponding intensity

light starts to flash. This takes a few seconds.

5 Place the appliance in a 90° angle on the skin so that the attachment

and the safety ring are in contact with the skin.

6 Press the safety ring fully onto the skin with slight pressure.

Note: The safety ring has contact switches that together are the safety system

of the appliance. This safety ring prevents unintentional flashing without skin

contact.

, The ‘ready to flash’ light on the back of the appliance lights up green

when all contact switches of the safety ring are in contact with the

skin and the appliance is charged. This may take up to 3.5 seconds.

Tip: For easier use, stretch the area of skin you want to treat. On areas with

softer skin, you may need to exert more pressure on the appliance to push in

all contact switches.

7 Press the flash button to release a flash.

Note: The visible light produced by the appliance is the reflection of the flash

on the skin and is harmless to your eyes. It is not necessary to wear goggles

during use.

8 Let go of the flash button after the appliance has flashed.

9 For the next flash, repeat steps 6 to 9. After each flash it takes up to

3.5 seconds until the appliance is ready to flash again.

Do not treat exactly the same area multiple times during one session.

This does not improve the effectiveness of the treatment, but increases

the risk of skin reactions.

ENGLISH 17

10 To avoid untreated areas, always make sure there is some overlap

with the previously treated area when you place the appliance on the

skin.The effective light only comes out of the light exit window. Make

sure the flashes are produced close to each other.

11 Switch off the appliance after you have finished the treatment.

12 Check the light exit window and the attachment for hairs and dirt and

clean the appliance after use (see chapter ‘Cleaning and maintenance’).

Guidelines for treatment

Average treatment time

Area Approx. treatment time

Underarms 1.5 minutes per underarm

Bikini line 1.5 minutes per side

Entire bikini area 5 minutes

One lower leg 12 minutes

One full leg 20 minutes

Note: The average treatment times above have been observed during research

and tests. Individual treatment times may vary from person to person.

Note: Fully charged batteries offer at least 320 flashes at intensity 5. How long

you can use the appliance depends on the size of the area to be treated and

the intensity setting used.

Using the appliance on the legs

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Setting the light intensity’ to see which settings are suitable for

your legs.

- You can move the appliance up and down or across the leg, whichever

is more convenient to you.

Note: Bony areas like shinbone and ankles are more sensitive than other areas

of the body. When you press the attachment hard onto these areas, the skin

can be more susceptible to skin reactions, such as skin irritation and redness.

See section ‘Possible side effects and skin reactions’ in this chapter. Press the

attachment onto the skin just hard enough to make the ‘ready to flash’ light go

on, but not harder.

Tip: The appliance may leave imprints on the skin in the treated areas. These

imprints may show you where you can make the treated areas overlap.

If you use the appliance to treat both your lower and upper legs, you may

have to recharge the appliance during the treatment. This is normal. How

long you can use the appliance depends on the size of the treatment area

and the intensity setting used.

Tip: Many users combine leg treatments with other activities around the house

such as watching TV or listening to music. You can also try this to make the

experience more enjoyable and relaxing.

ENGLISH18

Using the appliance in the bikini area

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Setting the light intensity’ to see which settings are suitable for

your bikini area.

In principle, Philips Lumea is safe and gentle enough for treatment of the

entire bikini area (e.g. for ‘Brazilian’ or ‘Hollywood’ style). Use a lower setting

on darker pigmented, more sensitive skin in the bikini area. Do not use the

appliance on inner labia, vagina and anus. Men who wish to treat their pubic

area must not use the appliance on the scrotum.

Note: For hygienic reasons, always clean the attachment before you start

treating another body area.

Using the appliance on the underarms

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Setting the light intensity’ to see which settings are suitable for

your underarms.

Make sure you remove any deodorant, perfume, cream or other skin care

product from your underarms before treatment.

Tip: To achieve optimal results on your underarms, stand in front of a mirror to

get a good view of the area to be treated and the ‘ready to flash’ light. Raise

your arm and place your hand in your neck to stretch the skin in the underarm

area. In this way the safety ring can be pressed more easily onto the skin,

which makes the treatment easier to perform.

Note: The reflected light does not harm your eyes. If the scattered light is

unpleasant, close your eyes when you release a flash.

How to achieve optimal results

- It is normal that hairs are still visible after the first few treatments (see

chapter ‘Introduction’, section ‘Working principle’ for more information).

- To remove all hairs successfully and prevent the hair follicle from

becoming active again, the treatments have to be repeated once every

two weeks for the first two months. Your skin should be smooth and

hair-free by then. Please read section ‘Maintenance phase’ to find out

how you can keep these results.

Maintenance phase

- To ensure that your skin stays smooth and hair-free, we advise you

to repeat the treatment every four to six weeks. The time between

treatments may vary based on your individual hair regrowth and also

across different body areas. If too many hairs grow back between

treatments, simply shorten the treatment interval again, but do not

treat any area more often than once every two weeks. When you use

the appliance more frequently than recommended, you do not increase

the effectiveness but you do increase the risk of skin reactions.

Possible side effects and skin reactions

Common skin reactions:

- Your skin may show slight redness and/or may prickle, tingle or feel

warm. This reaction is absolutely harmless and disappears quickly.

- A skin reaction similar to sunburn may occur on the treated area for a

short while. If this does not disappear within 3 days, we advise you to

consult a doctor.

ENGLISH 19

- Dry skin and itching may occur because of the combination of shaving

and light treatment. This is harmless and disappears within a few days.

You can cool the area with an ice pack or a wet cloth. If dryness

persists, you can apply a non-scented moisturiser on the treated area

24 hours after the treatment.

Rare side effects:

- Burns, excessive redness and swelling: these reactions occur very rarely.

They are the result of using a light intensity that is too high for your

skin colour. If these reactions do not disappear within 3 days, we advise

you to consult a doctor. Wait with the next treatment until the skin has

healed completely and make sure you use a lower light intensity.

- Skin discolouration: this occurs very rarely. Skin discolouration manifests

itself as either a darker or lighter patch than the surrounding area. This is

the result of using a light intensity that is too high for your skin colour. If

the discolouration does not disappear within 2 weeks, we advise you to

consult a doctor. Do not treat discoloured areas until the discolouration

has disappeared and your skin has regained its normal skin colour.

- Skin infection and inflammation: This occurs very rarely and may be

caused by using the appliance on wounds or cuts that resulted from

shaving, on already existing wounds or on ingrown hairs.

- Excessive pain: this can occur during or after treatment if you have

used the appliance on unshaved skin, if you use the appliance at a light

intensity that is too high for your skin colour, if you flash the same

area more than once and if you use the appliance on open wounds,

inflammations, infections, tattoos, burns, etc. See chapter ‘Important’,

section ‘Contraindications’ for more information.

After use

- Do not apply any perfumed cosmetics to the areas treated immediately

after treatment.

- Do not use deodorant immediately after treating the underarms. Wait

until any skin redness has disappeared completely.

- See chapter ‘Preparing for use’, section ‘Tanning advice’ for information

about sun exposure and artificial tanning.

Cleaning and maintenance

To ensure optimal results and a long life for the appliance, clean the

appliance before and after each use and, if necessary, also during the

treatment. The appliance loses its effectiveness if you do not clean it

properly.

Never clean the appliance or any of its parts under the tap or in the

dishwasher.

Never use scouring pads, abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the appliance.

Never scratch the light exit window or the metallic frame inside

the attachment.

Note: Make sure that the contact switches of the safety ring do not get

congested with dirt.

Note: Stop using the appliance when it is no longer possible to clean the light

exit window or the attachment.

ENGLISH20

La page charge ...

Philips SC2001/00 Manuel utilisateur

Marque: Philips

Modèle: SC2001/00

Catégorie: Appareils de soins de la peau

Taper: Manuel utilisateur

Ce manuel convient également à

SC2001/01

Télécharger le PDF

rapport

dans d''autres langues

English: Philips SC2001/00 User manual

Philips SC2001/00 Manuel utilisateur

Ce manuel convient également à

Philips SC2001/00 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents