Maytag MMW9730FZ Manuel utilisateur

Marque: Maytag

Modèle: MMW9730FZ

Catégorie: Cuisinières

Taper: Manuel utilisateur

BUILT-IN ELECTRIC MICROWAVE

OVEN COMBINATION - LOWER OVEN

USER INSTRUCTIONS

THANK YOU for purchasing this high-quality product. Register your new oven at www.maytag.com. In Canada, register your oven

at www.maytag.ca.

For future reference, please make a note of your product model and serial numbers. These can be located on the right-hand side of

the microwave oven frame inside the microwave oven door.

Model Number _________________________________________ Serial Number __________________________________________

Para una versión de estas instrucciones en español, visite: www.maytag.com.

Deberá tener los números de modelo y serie. Se encuentran en el lado inferior derecho del marco del horno, dentro de la puerta.

W10875903B

Table of Contents

OVEN SAFETY ................................................................................2

FEATURE GUIDE ............................................................................3

OVEN USE ....................................................................................... 4

Electronic Oven Controls .............................................................4

Sabbath Mode..............................................................................5

Aluminum Foil ............................................................................... 6

Positioning Racks and Bakeware ................................................6

Roll-Out Rack ...............................................................................6

Oven Vent .....................................................................................7

Baking and Roasting ....................................................................7

Broiling..........................................................................................7

Convection Cooking ....................................................................7

Keep Warm ................................................................................... 9

Cook & Hold .................................................................................9

Cook Time ....................................................................................9

OVEN CARE ..................................................................................10

Self-Cleaning Cycle ....................................................................10

General Cleaning ........................................................................11

Oven Lights ................................................................................11

TROUBLESHOOTING ..................................................................11

ACCESSORIES .............................................................................12

WARRANTY ..................................................................................13

OVEN SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the oven, follow

basic precautions, including the following:

■ Proper Installation – Be sure the oven is properly installed

and grounded by a qualified technician.

■

Never Use the Oven for Warming or Heating the Room.

■

Do Not Leave Children Alone – Children should not be left

alone or unattended in area where oven is in use. They

should never be allowed to sit or stand on any part of the

oven.

■ Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the oven.

■ User Servicing – Do not repair or replace any part of the

oven unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

■ Storage in Oven – Flammable materials should not be

stored in an oven.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

■ Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■ Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

■ Keep Oven Vent Ducts Unobstructed.

■

Placement of Oven Racks – Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

■

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot

even though they are dark in color. Interior surfaces of an

oven become hot enough to cause burns. During and after

use, do not touch, or let clothing or other flammable

materials contact heating elements or interior surfaces of

oven until they have had sufficient time to cool. Other

surfaces of the oven may become hot enough to cause

burns – among these surfaces are oven vent openings and

surfaces near these openings, oven doors, and

windows of

oven doors.

For self-cleaning ovens:

■

Do Not Clean Gasket – The gasket is essential for a good

seal. Care should be taken not to rub, damage, or move

the gasket.

■

Do Not Use Oven Cleaners – No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

■ Clean Only Parts Listed in Manual.

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

FEATURE GUIDE

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked

Questions (FAQs) section of our website at www.maytag.com for more detailed instructions. In Canada, reference the Customer

Service section at www.maytag.ca. For more speciﬁc details on a feature and steps to use the feature listed, refer to the titled

section for that feature.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Keypad Feature Instructions

CLOCK Clock

This clock uses a 12- or 24-hour cycle. See “Electronic Oven Controls” section.

1. Press CLOCK until “Clock” is displayed.

2. Press the number keypads to set the time of day.

3. Press START LOWER.

LIGHT Oven cavity light

While the oven door(s) are closed, press LIGHT to turn the light(s) on and off. The oven

light(s) will come on when an oven door is opened.

KITCHEN TIMER ON/

OFF

Oven timer

The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press KITCHEN TIMER ON/OFF.

2. Press the number keypads to set the length of time in hr.-min. Leading zeros do not

have to be entered. For example, for 2 minutes, enter “2.”

3. Press KITCHEN TIMER ON/OFF to begin the countdown. If enabled, timer tone(s) will

sound at the end of countdown.

4. Press KITCHEN TIMER ON/OFF to cancel the Timer and return to the time of day.

Do not press the Cancel keypad because the oven will turn off.

START Cooking start

The Start keypad begins any oven function. If Start is not pressed within 2 minutes after

pressing a keypad, the function is canceled and the time of day is displayed.

CANCEL Oven function

The Cancel keypad stops any oven function except the Clock, Timer, and Control Lock

in the selected oven.

BAKE Baking and

roasting

1. Press BAKE.

2. Press the number keypads to set the desired temperature. If the temperature entered

is not in the range of the temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the allowable range.

3. Press START LOWER.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL LOWER when ﬁnished.

BROIL Broiling

1. Press BROIL.

2. Press the number keypads to set the desired temperature. If the temperature entered

is not in the range of the temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the allowable range.

3. Press START LOWER, and then allow the oven to preheat for 2 minutes.

4. Position the cookware in the oven and close the door.

5. Press CANCEL LOWER when ﬁnished.

OVEN USE

Odors and smoke are normal when the oven is used the ﬁrst few

times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to

the fumes given off. Exposure to the fumes may result in death

to certain birds. Always move birds to another closed and well-

ventilated room.

Electronic Oven Controls

Control Display

The display will light up when ﬁrst powered up or after a power

loss. When oven is not in use, the time of day is displayed.

Tones

Tones are audible signals, indicating the following:

One Tone

■ Valid keypad press

■ Oven is preheated (long tone).

■ Timer (long tone with reminder tone every 60 seconds)

■ Function has been entered.

Three Tones

■ Invalid keypad press

Keypad Feature Instructions

CONVECT Convection

cooking

1. Press CONVECT until the desired mode is displayed. Follow the scrolling text

directions for the desired mode or see the speciﬁc directions for the desired mode in

the “Convection Cooking” section.

2. Press START LOWER.

3. Press the number keypads to set the desired temperature. If the temperature entered

is not in the range of the temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the allowable range.

4. Press START LOWER.

5. To change the temperature, repeat steps 3 and 4.

6. Press CANCEL LOWER when ﬁnished.

KEEP WARM Hold warm

Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM.

2. Press the number keypads to set the desired temperature. If the temperature entered

is not in the range of the temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the allowable range.

3. Press START LOWER.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL LOWER when ﬁnished.

DELAY START Delayed start

The Delay Start keypad is used to enter the starting time for an oven function with

a delayed start. Delay Start should not be used for foods such as breads and cakes

because they may not bake properly.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

COOK TIME Timed cooking

Cook Time allows the oven to be set to turn on at a certain time of day, cook for a

set length of time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

COOK & HOLD Timed cooking

and keep warm

Cook & Hold allows the oven to be set to cook for a set length of time, followed

by a 1-hour Keep Warm cycle.

To set a Cook & Hold or a Delayed Cook & Hold, see the “Cook & Hold” section.

SELF CLEAN Self-cleaning

cycle

See the “Self-Cleaning Cycle” section.

CONTROL LOCK

hold 3 sec.

Oven control

lockout

1. Check that the ovens and timers are OFF.

2. Press and hold CONTROL LOCK for 3 seconds.

3. If enabled, a tone will sound and the controls will be locked.

4. Repeat to unlock. No keypads will function with the controls locked.

SETTINGS Oven use

functions

Enables you to personalize the audible tones and oven operation to suit your needs.

See the “Oven Use” section.

Four Tones

■ End-of-cycle (with reminder tone every 60 seconds)

Use the Settings keypad to change the tone settings.

Settings

Many features of the oven control can be adjusted to meet

your personal needs. These changes are made using the

Settings keypad.

Use the Settings keypad to scroll through the features that can

be changed. Each press of the Settings keypad will advance

the display to the next setting. After selecting the feature to be

changed, the control will prompt you for the required input.

Details of all of the feature changes are explained in the

following sections.

Press CANCEL LOWER to exit Settings.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit but can be changed

to Celsius.

1. Press SETTINGS until “TEMP UNIT” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

Audible Tones Disable

Turns off all tones, including the end-of-cycle tone and keypress

tones, except reminder tones. Reminder tones remain enabled

when audible tones are disabled.

1. Press SETTINGS until “SOUND” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

Sound Volume

Sets the pitch of the tone to either high or low.

1. Press SETTINGS until “SOUND VOLUME” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

End-of-Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press SETTINGS until “END TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

Keypress Tones

Activates or turns off the tones when a keypad is pressed.

1. Press SETTINGS until “KEYPRESS TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute

after the end-of-cycle tones.

1. Press SETTINGS until “REMINDER TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

12-/24-Hour Clock

1. Press SETTINGS until “12/24 HOUR” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

12-Hour Shutoff

The oven control is set to automatically shut off the oven

12 hours after the oven initiates a cook or clean function.

This will not interfere with any Timed Cook or Delayed Timed

Cook functions.

1. Press SETTINGS until “12 HR AUTO OFF” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

Languages – Scrolling Display Text

Language options are English and French.

1. Press SETTINGS until “LANGUAGE” is displayed.

2. The current setting will be displayed.

3. Press the number keypad as instructed by the scrolling

text to select the new language.

4. Press CANCEL LOWER to exit and display the time of day.

Oven Temperature Offset Control

IMPORTANT: Do not use a thermometer to measure oven

temperature. Elements will cycle on and off as needed to provide

consistent temperature, but they may run slightly hot or cool at

any point in time due to this cycling. Most thermometers are slow

to react to temperature change and will not provide an accurate

reading due to this cycling.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature can

be adjusted to personalize it for your cooking needs. It can be

changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press SETTINGS until “TEMP CALIB” is displayed.

2. The current setting will be displayed. For double ovens

only: Press the “1” keypad to toggle between the upper

and lower ovens.

3. Press START LOWER to select the choice displayed in Step 2.

Wait several seconds for the display to change or press START

LOWER, and then continue with Step 4.

4. Press the “3” keypad to increase the temperature in 5°F

(3°C) increments or press the “6” keypad to decrease the

temperature in 5°F (3°C) increments. The range is from

-30°F to +30°F (-18°C to +18°C).

5. Press START LOWER.

6. Press CANCEL LOWER to exit and display the time of day.

Demo Mode

IMPORTANT: This feature is intended for use on the sales ﬂoor

with 120V power connection and permits the control features

to be demonstrated without heating elements turning on. If this

feature is activated, the oven will not work.

1. Press SETTINGS until “DEMO MODE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL LOWER to exit and display the time of day.

Sabbath Mode

The Sabbath mode sets the oven to remain on in a bake setting

until turned off.

When the Sabbath mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off and the heating elements will not turn on or off

immediately.

NOTE: If a power failure happens while Sabbath mode is running,

the oven will show Sabbath mode is ON, but the Bake cycle will

not be ON. If the oven door is opened during this time, the oven

light will turn on.

To Enable Sabbath Mode Capability (One Time Only):

1. Press SETTINGS until “SABBATH” is displayed.

2. Press the “1” keypad. Sabbath mode can be activated

for baking.

3. Press CANCEL LOWER to save the setting and exit to display

the time of day.

NOTE: To disable the Sabbath mode, repeat steps 1 through 3

to change the status from “SABBATH ON” to “SABBATH OFF.”

To Activate Sabbath Mode:

1. Press BAKE.

2. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

3. Press START LOWER.

For timed cooking in Sabbath mode, press COOK TIME, and

then press the number keypads to set the desired cook time.

Press START LOWER.

4. Press SETTINGS. Three tones will sound. Then press “7.”

“SAb” will appear in the display.

To Adjust Temperature:

1. Press the number keypad as instructed by the scrolling

text to select the new temperature.

NOTE: The temperature adjustment will not appear on

the display and no tones will sound. The scrolling text

will be shown on the display as it was before the keypad

was pressed.

2. Press START LOWER.

To Deactivate Sabbath Mode:

Press SETTINGS, and then press “7” to return to regular baking,

or press CANCEL LOWER to turn off the oven(s).

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

ﬁnish, do not line the oven bottom with any type of aluminum

foil or liner.

For best cooking results, do not cover entire oven rack with

aluminum foil because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain

ﬁnish, do not place food or bakeware directly on the oven

door or bottom.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

■ Place food so it will not rise into the broil element. Allow

at least ¹⁄₂" (1.3 cm) between pans and the broil element.

To move a rack, pull it out to the stop position, raise the front

edge, and then lift it out. Use the following illustrations and

charts as a guide for positioning racks.

Rack Positions

Broiling

Food Rack Position

Broiled meats, poultry, ﬁsh 6

Broiling/searing meats, hamburgers, steaks 6

Baking

Food Rack Position

Large roasts, roasted meats, or poultry 1 or 2

Most baked goods, casseroles 2 or 3

Baking Layer Cakes on 1 Rack

Place the cakes on the rack as shown.

Multiple-Rack Cooking

2-rack: Use rack positions 2 and 5 for regular baking.

2-rack (convection only): Use rack positions 2 and 5

for convection baking.

Baking Layer Cakes on 2 Racks

For best results when baking cakes on 2 racks, use rack

positions 2 and 5 with the Bake function. Place the cakes

on the racks as shown.

Baking Cookies on 2 Racks

For best results when baking cookies on 2 racks, use rack

positions 2 and 5 with the Convection Bake function.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5.0 cm) of space around bakeware and oven walls. Use the

following chart as a guide.

Number of Pan(s) Position on Rack

1 Center of rack

2 Side by side

3 or 4 Refer to the previous illustration.

NOTE: Bakeware materials and color may affect results. Dark,

dull, non-stick, or glass pans may require shorter baking times.

In contrast, insulated or stainless steel pans may require longer

baking times. Follow bakeware manufacturer's recommendations.

Roll-Out Rack

The roll-out rack allows easy access to position and remove

food in the oven. The roll-out rack will ﬁt in all positions.

Open Position

A. Slide rails

B. Sliding shelf

Closed and Engaged Position

To Remove Roll-Out Rack:

1. Slide the rack in completely so that it is closed and engaged

with the sliding shelf.

2. Using 2 hands, lift up on the front edge of the rack and the

sliding shelf together. Slowly push rack and sliding shelf to the

back wall of the oven so the front edge of the sliding shelf sits

on the rack guides located on the sides of the oven.

The front edge of the rack and the sliding shelf should be

higher than the back edge.

3. Using 2 hands, lift up on the front edge of the rack and sliding

shelf together.

4. Pull out the rack and sliding shelf.

To Replace Roll-Out Rack:

1. Using 2 hands, grasp the front of the closed rack and the

sliding shelf. Position the closed rack and the sliding shelf

on the rack guide.

2. Using 2 hands, lift up on the front edge of the rack and the

sliding shelf together.

3. Slowly push the rack and the sliding shelf to the back of the

oven until the back edge of the rack pulls over the end of the

rack guide.

To avoid damage to the sliding shelves, do not place more than

25 lbs (11.4 kg) on the rack.

Do not clean the roll-out extension rack in a dishwasher. It may

remove the rack’s lubricant and affect its ability to slide.

See the “General Cleaning” section for more information.

Oven Vent

The oven vent should not be blocked or covered since it allows

the inlet of fresh air into the cooling system. Also, the bottom

vent should not be blocked or covered since it allows the inlet of

fresh air into the cooling system and the outlet of hot air from the

cooling system. Blocking or covering vents will cause poor air

circulation, affecting cooking, cleaning, and cooling results.

A. Slide rails

B. Sliding shelf

A. Slide rails

B. Rack

C. Sliding shelf

A. Control panel

B. Oven vent

C. Oven

Baking and Roasting

Preheating

When beginning a Bake cycle, the oven will begin preheating

after START LOWER is pressed. The oven will take approximately

13 to 19 minutes to reach 350°F (177°C) with all of the oven

racks provided with your oven inside the oven cavity. Higher

temperatures will take longer to preheat. The preheat cycle rapidly

increases the oven temperature. The actual oven temperature

will go above your set temperature to offset the heat lost when

your oven door is opened to insert food. This ensures that when

you place your food in the oven, the oven will begin at the proper

temperature. Insert your food when the preheat tone sounds. Do

not open the door during preheat before the tone sounds.

Oven Temperature

While in use, the oven elements will cycle on and off as needed

to maintain a consistent temperature, but they may run slightly

hot or cool at any point in time due to this cycling. Opening the

oven door while in use will release the hot air and cool the oven

which could impact the cooking time and performance. It is

recommended to use the oven light to monitor cooking progress.

Before baking and roasting, position racks according to the

“Positioning Racks and Bakeware” section. When roasting, it is

not necessary to wait for the oven preheat cycle to end before

putting food in unless it is recommended in the recipe.

Broiling

When broiling, preheat the oven for 5 minutes before putting food

in unless recommended otherwise in the recipe. Position food

on grid in a broiler pan, and then place it in the center of the oven

rack. Close the oven door to ensure proper broiling temperature.

NOTE: Odors and smoke are normal the ﬁrst few times the oven

is used or if the oven is heavily soiled.

Changing the temperature when broiling allows more precise

control when cooking. A lower broil setting causes cooking to

occur slower. Thicker cuts and unevenly shaped pieces of meat,

ﬁsh, and poultry may cook better at lower broil settings. Place the

food in the upper or lower oven. Refer to the “Positioning Racks

and Bakeware” section for more information.

On lower settings, the broil element will cycle on and off to

maintain the proper temperature.

■ For best results, use a broiler pan and grid. It is designed

to drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be

ordered. Please refer to the “Accessories” section for

more information.

Convection Cooking

During convection cooking, the fan provides hot air circulation

throughout the oven. The movement of heated air around the

food can help to speed up cooking by penetrating the cooler

outer surfaces. Food cooks more evenly, browning and crisping

outer surfaces while sealing moisture inside.

During the Convect function, the ring element, bake and broil

elements, and the fan operate to heat the oven cavity. If the oven

door is opened during convection cooking or preheating, the

fan turns off immediately and the element(s) will turn off after

30 seconds. Once the door is closed, the element(s) will turn

back on.

NOTE: It is normal for the convection fan to run during non-

convection cycles as well as during preheat.

■ It is important not to cover foods so that surface areas remain

exposed to the circulating air, allowing browning and crisping.

■ Keep heat loss to a minimum by only opening the oven door

when necessary. It is recommended to use the oven light to

monitor cooking progress.

■ Choose cookie sheets without sides and roasting pans with

lower sides to allow air to move freely around the food.

■ Test baked goods for doneness a few minutes before the

minimum cooking time with a method such as a toothpick.

■ Use a meat thermometer to determine the doneness of meats

and poultry. Check the temperature of pork and poultry in 2 or

3 different places, including the thickest part.

■ Before convection cooking, position the rack(s) according to

the “Positioning Racks and Bakeware” section.

■ When using more than one rack, position bakeware/cookware

on the racks to allow movement of the fan-circulated air

around the food. See the “Positioning Racks and Bakeware”

section.

■ If the oven is full, extra cooking time may be needed.

■ For optimal cooking results, do not cover food.

■ When roasting poultry and meat, use a broiler pan and grid.

It is not necessary to wait for the oven to preheat, unless

recommended in the recipe.

To order a broiler pan, see the “Assistance or Service” section.

Convection Baking

Use Convect Bake for single- or multiple-rack baking. When

convection baking, reduce your recipe baking temperature

by 25°F (15°C).

1. Press CONVECT until “CONVECT BAKE” is displayed.

2. Press START LOWER.

3. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

4. Press START LOWER. The oven will begin preheating. There

are 2 preheat modes on Convect Bake function. Use Rapid

Preheating when using a single rack only and use the standard

Preheating when using multiple racks. It is possible to switch

between “Rapid Preheating” and “Preheating” by pressing

START LOWER for the selected oven during the preheating.

5. Place the food in the oven and close the oven door when

preheat is completed.

6. Press CANCEL LOWER when ﬁnished.

7. Remove food from the oven.

NOTE: The temperature may be changed at any time by pressing

the number keypads to enter the desired temperature and then

pressing START LOWER. Changing the temperature once food is

placed in the oven could affect the performance.

Convection Broil

When convection broiling, enter your normal broiling temperature.

The oven door must be closed when using Convect Broil.

It is not necessary to preheat the oven for Convect Broil.

1. Place the food in the oven and close the oven door.

2. Press CONVECT until “CONVECT BROIL” is displayed.

3. Press START LOWER.

4. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

5. Press START LOWER.

6. Press CANCEL LOWER when ﬁnished.

7. Remove food from the oven.

NOTE: The temperature may be changed at any time by pressing

the number keypads to enter the desired temperature and then

pressing START LOWER. Changing the temperature once food is

placed in the oven could affect the performance.

A. Broiler grid

B. Broiler pan

Convection Roasting

When convection roasting, enter your normal roasting

temperature. The roasting time should be 15-30% less

than in conventional cooking.

It is not necessary to preheat the oven for Convect Roast.

1. Place the food in the oven and close the oven door.

2. Press CONVECT until “CONVECT ROAST” is displayed.

3. Press START LOWER.

4. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

5. Press START LOWER.

6. Press CANCEL LOWER when ﬁnished.

7. Remove food from the oven.

NOTE: The temperature may be changed at any time by pressing

the number keypads to enter the desired temperature and then

pressing START LOWER. Changing the temperature once food is

placed in the oven could affect the performance.

Convection Recipe

When using Convection Recipe, enter your normal cooking

temperature. The oven door must be closed when using

Convection Recipe.

It is not necessary to preheat the oven for Convection Recipe

Meats option.

1. For Convection Recipe Meats only: Place food in the oven and

close the oven door.

2. Press CONVECT until “CONVECT RECIPE” is displayed.

3. Press START LOWER.

4. Press CONVECT to cycle between the options. Press START

LOWER to select the displayed option.

5. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

6. Press START LOWER.

7. Press the number keypads to enter the desired cook time,

and then press START LOWER.

NOTE: For Baked Foods and Others options only: The

temperature will automatically be adjusted by decreasing the

temperature entered by 25°F (15°C). For baked foods only, do

not decrease the temperature on the recipe by 25°F (15°C); the

oven will automatically decrease the temperature entered by

25°F (15°C).

For Meats and Others options only: The cook time will

automatically be adjusted to 80% of the time entered and the

adjusted cook time will appear on the display, but temperature

will not be adjusted.

NOTE: Preheating can cause overcooking. If preheat is

required for the recipe, add 15 minutes to the cook time.

Place food in the oven at appropriate time.

8. For Baked Foods and Others options only: The preheating will

start and once complete, the unit will sound a tone. Place the

food in the oven and close the oven door.

9. At the end of the cooking time set, the oven will turn off

automatically, the end-of-cycle tone will sound, and “Cooking

Complete” will appear in the text area. It's also possible to

press CANCEL LOWER to ﬁnish the cycle.

10. Remove food from the oven.

Keep Warm

IMPORTANT: Food must be at serving temperature before placing

it in the warmed oven. Food may be held up to 1 hour; however,

breads and casseroles may become too dry if left in the oven

during the Keep Warm function. For best results, cover food.

The Keep Warm feature allows hot cooked foods to stay at serving

temperature.

To Use:

1. Press KEEP WARM.

2. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

NOTE: The temperature may be changed at any time by

pressing the number keypads to enter the desired temperature

and then START LOWER.

3. Press START LOWER.

4. Place food in the oven.

5. Press CANCEL LOWER when ﬁnished.

6. Remove food from the oven.

To Cancel Keep Warm:

1. Press CANCEL LOWER.

2. Remove food from oven.

Cook & Hold

Cook & Hold allows the oven to be set to cook for a set length

of time, followed by a 1-hour Keep Warm cycle.

Delay Cook & Hold allows the oven to be set to start cooking after

a length of time you set, cook for a set length of time, followed by

a 1-hour Keep Warm cycle.

Delay Start should not be used for foods such as breads and

cakes because they may not bake properly. Do not use delayed

baking if oven is already hot.

NOTE: During the Cook & Hold function, the Delay Start and

Cook Time are applied to the baking itself and not for the

“Holding Warm” phase.

1. Press BAKE.

2. Use the number keypads to enter the desired temperature.

NOTE: The temperature may be changed at any time by using

the number keypad to enter the desired temperature and then

pressing START LOWER. Changing the temperature once food

is placed in the oven could affect the performance.

3. Press COOK & HOLD.

4. Use the number keypads to enter the desired cook time.

5. (Optional) If a Delay Start is desired, press DELAY START.

Use the number keypads to enter the desired time for delay.

Repeat steps 1 through 3.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

1. Press START LOWER. The oven will preheat and a beep will

sound when the preheat is done.

2. Place the food in the oven and close the oven door when

preheat is complete.

3. At the end of the time set, the oven will keep warm

automatically, the end-of-cycle tone will sound.

NOTE: The set cooking time can be changed at any time

during the cooking cycle by: pressing COOK TIME, entering

the desired time using the number keypads, pressing START

LOWER, and then pressing COOK & HOLD.

Once the cook time countdown is complete, “Cooking

complete – Holding warm” will scroll in the text area until

the door is opened, Cancel Lower is pressed, or 1 hour has

passed.

4. Press CANCEL LOWER to complete the cycle.

5. Remove food from the oven.

NOTE: To cancel the hold function without canceling the cooking

cycle, press COOK & HOLD after the cook & hold function is

enabled. The display will not display anything. Once the cook

time countdown is complete, “Cooking complete” will scroll in

the text area.

Cook Time

To Set a Timed Cook:

1. Press the keypad for any cooking function except Broil

or Keep Warm.

2. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

3. Press COOK TIME.

4. Press the number keypads to enter the length of time to cook.

5. Press START LOWER. The display will count down the time.

When the time ends, the oven will shut off automatically.

The temperature and/or time setting can be changed

at any time.

To change the temperature, repeat steps 2 through 5

and press START LOWER.

To change the time setting, repeat steps 3 through 5.

6. Press CANCEL LOWER to clear the display.

To Set a Delayed Timed Cook:

1. Press DELAY START.

2. Press the number keypads to enter the number of hours

and/or minutes you want to delay the start time.

3. Press the keypad for any cooking function except Broil

or Keep Warm.

4. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures

allowed, the minimum or maximum allowed temperature will

be displayed. Enter a temperature in the allowable range.

5. Press START LOWER.

6. Press the number keypads to enter the length of time to cook.

7. Press START LOWER.

When the start time is reached, the oven will automatically turn on.

To change the temperature after the delay countdown, repeat

steps 4 and 5. To change the time after the delay countdown,

press COOK TIME, and then repeat steps 6 and 7.

When the set cook time ends, the oven will shut off automatically.

8. Press CANCEL LOWER to clear the display.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

OVEN CARE

Self-Cleaning Cycle

IMPORTANT: The health of some birds is extremely sensitive

to the fumes given off during the Self-Cleaning cycle. Exposure

to the fumes may result in death to certain birds. Always move

birds to another closed and well-ventilated room.

Keep the kitchen well-ventilated during the Self-Cleaning cycle

to help get rid of heat, odors, and smoke.

Do not block the oven vent(s) during the Self-Cleaning cycle.

Air must be able to move freely. Depending on your model,

see the “Oven Vent” or “Oven Vents” section.

Do not clean, rub, damage, or move the oven door gasket.

Prepare Oven:

■ Remove the broiler pan, grid, cookware and bakeware, all

cooking utensils, oven racks and aluminum foil and, on

some models, the temperature probe from the oven.

■ Use a damp cloth to clean inside door edge and the 1½"

(38 mm) area around the inside oven cavity frame, being

certain not to move or bend the gasket.

■ Wipe out any loose soil to reduce smoke and avoid damage.

At high temperatures, foods react with porcelain. Staining,

etching, pitting, or faint white spots can result. This will not

affect cooking performance.

IMPORTANT:

■ Oven temperature must be below 500°F (260°C) to program

a Self-Cleaning cycle.

How the Cycle Works:

IMPORTANT: The heating and cooling of porcelain on steel in the

oven may result in discoloring, loss of gloss, hairline cracks, and

popping sounds.

The Self-Cleaning cycle uses very high temperatures, burning

soil to a powdery ash.

Once the oven has completely cooled, remove ash with a damp

cloth. To avoid breaking the glass, do not apply a cool damp

cloth to the inner door glass before it has completely cooled.

The oven light will not light during the Self-Cleaning cycle.

To stop the Self-Cleaning cycle at anytime, press CANCEL

LOWER. If the temperature is too high, the oven doors will

remain locked.

When the oven is locked, the doors of the oven cannot be opened.

To avoid damage to the doors, do not force the doors open when

the oven is locked.

Before self-cleaning, make sure the doors are completely

closed, or the doors will not lock and the Self-Cleaning cycle

will not begin.

NOTE: 12 hours must pass before the next Self-Cleaning cycle

can begin.

The oven is preset for the recommended Self-Cleaning cycle;

however, the time can be changed. Suggested clean times are

3 hours for light soil and between 4 hours and 5 hours for

average-to-heavy soil.

Use the following chart as a guide to determine the desired

cleaning level.

Cleaning Level Total Cleaning Time

(Includes a 30-Minute Cool-Down Time)

1 3 hours

2 3 hours 20 minutes

3 3 hours 40 minutes

4 4 hours

5 4 hours 30 minutes

6 5 hours

To Self-Clean:

1. Close the oven doors, and then press SELF CLEAN.

2. Choose the cleaning level desired by pressing the appropriate

number keypad as instructed by the scrolling text.

3. Press START LOWER.

The oven door will automatically lock.

When the Self-Cleaning cycle is complete and the oven cools,

the oven door will unlock.

4. When the oven is completely cooled, remove ash with

a damp cloth.

To Delay Start Self-Clean:

1. Close the oven doors, and then press DELAY START.

2. Press the number keypads to enter the desired amount

of time by which you want to delay the start.

3. Press SELF CLEAN.

4. Choose the clean level desired by pressing the appropriate

number keypad as instructed by the scrolling text.

5. Press START LOWER.

The oven door will automatically lock after the Delay Start

countdown.

When the Self-Cleaning cycle is complete and the oven

cools, the oven door will unlock.

6. When the oven is completely cooled, remove ash with

a damp cloth.

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are

OFF and the oven is cool. Always follow label instructions on

cleaning products. For additional information, you can visit the

Frequently Asked Questions (FAQs) section of our website at

www.maytag.com. In Canada, refer to the Customer Service

section at www.maytag.ca.

Soap, water, and a soft cloth or sponge are suggested ﬁrst,

unless otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

(on some models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire oven is cool. These spills may

affect the ﬁnish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner, or nonabrasive scrubbing

pad: Gently clean around the model/serial/rating plate because

scrubbing may remove numbers.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

STAINLESS STEEL AND BLACK STAINLESS STEEL

(on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-ﬁlled scouring pads, abrasive cleaners, steel-wool pads,

gritty washcloths, or abrasive paper towels. Damage may occur

to stainless steel surfaces, even with one-time or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ affresh

Stainless Steel Cleaner Part Number W10355016:

See the “Accessories” section for more information.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust

removers, ammonia, or sodium hydroxide (lye) because paint

surface may stain.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel wool pads, gritty washcloths, or abrasive

paper towels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly

on panel.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad

■ For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

OVEN CAVITY

Do not use oven cleaners.

Food spills should be cleaned after the oven cools. At high

temperatures, foods react with porcelain. Staining, etching,

pitting, or faint white spots can result.

Cleaning Method:

■ Self-Cleaning cycle:

See “Self-Cleaning Cycle” ﬁrst.

Oven Lights

The oven light(s) are standard 25-watt appliance bulbs. Before

replacing, make sure the oven is cool and the controls are

turned off.

To Replace:

1. Disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, and then bulb cover by turning clockwise.

5. Reconnect power.

TROUBLESHOOTING

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer

to the warranty page in this manual and scan the code there with your mobile device, or visit http://www.maytag.com/product_help.

In Canada, visit http://www.maytag.ca.

In the U.S.A.:

Maytag Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

In Canada:

Maytag Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Problem Possible Causes and/or Solutions

Nothing will operate

Oven isn’t wired properly: See the Installation Instructions.

Household fuse is blown or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker.

If the problem continues, call an electrician.

The control displays an F9 or F9 E0 error code: The electrical outlet in the home may be miswired.

Contact a qualiﬁed electrician to verify the electrical supply.

Oven will not operate

Delay Start is set: See the “Cook Time” section.

Control Lock is ON: Press and hold CONTROL LOCK for 3 seconds to unlock.

Control is in Demo mode: See the “Electronic Oven Controls” section. Demo mode is used for display

models in a showroom.

Electronic oven control set incorrectly: See the “Electronic Oven Controls” section.

ACCESSORIES

For accessories in the U.S.A., you can visit our website at www.maytag.com or call us at 1-800-688-9000.

In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.

affresh

Stainless Steel Cleaning Wipes

(stainless steel models)

Order Part Number W10355049

affresh

Stainless Steel Cleaner

(stainless steel models)

Order Part Number W10355016

affresh

Kitchen and Appliance Cleaner

Order Part Number W10355010

Granite Cleaner and Polish

Order Part Number W10275756

Porcelain Broiler Pan and Grid

Order Part Number 4396923

Premium Broiler Pan and Roasting Rack

Order Part Number W10123240

Problem Possible Causes and/or Solutions

Oven temperature too high

or too low

Oven temperature needs adjustment: See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Display shows messages

Power failure (display shows incorrect time): On some models, reset the clock if needed. See the

“Clock” keypad feature in the “Feature Guide” section.

Error code (display shows letter followed by number): Power off, wait 10 seconds, and then power

on. Press CANCEL to clear the display. See “Control Display” in the “Electronic Oven Controls” section.

If it reappears, call for service. See the “Warranty” section for contact information.

Self-Cleaning cycle did not

work on all spills

Several cooking cycles between Self-Cleaning cycles or spills on oven walls and doors: Run

additional Self-Cleaning cycles. The affresh

Kitchen and Appliance Cleaner can be used for stubborn

soils. See the “Accessories” and “Self-Cleaning Cycle” sections for more information.

Oven cooking results not

what expected

The set temperature was incorrect: Double-check the recipe in a reliable cookbook.

Oven temperature needs adjustment: See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Oven was not preheated: See the “Baking and Roasting” section.

Racks were positioned improperly: See the “Positioning Racks and Bakeware” section.

Not enough air circulation around bakeware: See the “Positioning Racks and Bakeware” section.

Batter distributed unevenly in pan: Check that batter is level in the pan.

Darker browning of food caused by dull or dark bakeware: Lower the oven temperature 25°F (15°C)

or move rack to a higher position in the oven.

Lighter browning of food caused by shiny or light-colored bakeware: Move rack to a lower position

in the oven.

Incorrect length of cooking time was used: Adjust cooking time.

Oven door was not closed: Be sure that the bakeware does not keep the door from closing.

Oven door was opened during cooking: Oven peeking releases oven heat and can result in longer

cooking times.

Rack is too close to bake burner, making baked items too brown on bottom: Move rack to higher

position in the oven.

Pie crusts browning too quickly: Use aluminum foil to cover the edge of the crust and/or reduce

baking temperature.

11/14

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions

can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver

section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit

https://www.maytag.com/product_help.

2. All warranty service is provided exclusively by our authorized Maytag Service Providers. In the U.S. and Canada,

direct all requests for warranty service to:

Maytag Customer eXperience Center

In the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Maytag dealer to determine whether another

warranty applies.

MAYTAG

BUILT-IN OVEN

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the

Customer eXperience Center:

■ Name, address and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase including dealer or retailer name and address

TEN YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR)

For one year from the date of purchase, when this major

appliance is installed, operated and maintained according to

instructions attached to or furnished with the product, Maytag

brand of Whirlpool Corporation or Whirlpool Canada, LP

(hereafter “Maytag”) will pay for factory speciﬁed replacement

parts and repair labor to correct defects in materials or

workmanship that existed when this major appliance was

purchased, or at its sole discretion replace the product. In the

event of product replacement, your appliance will be warranted

for the remaining term of the original unit’s warranty period.

SECOND THROUGH TENTH YEAR LIMITED WARRANTY

(CERTAIN COMPONENT PARTS ONLY -

LABOR NOT INCLUDED)

In the second through tenth years from the date of original

purchase, when this major appliance is installed, operated and

maintained according to instructions attached to or furnished

with the product, Maytag will pay for factory speciﬁed parts for

the following components to correct non-cosmetic defects in

materials or workmanship in these parts that prevent function of

this major appliance and that existed when this major appliance

was purchased. This is a limited 10-year warranty on the below

named parts only and does not include repair labor.

■ Electric Bake/Broil (Excludes Convection Element)

■ Cavity (Rust Through and Broken Welds Only)

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. Service must be provided by a Maytag designated

service company. This limited warranty is valid only in the

United States or Canada and applies only when the major

appliance is used in the country in which it was purchased. This

limited warranty is effective from the date of original consumer

purchase. Proof of original purchase date is required to obtain

service under this limited warranty.

1. Commercial, non-residential, multiple-family use, or use inconsistent with

published user, operator or installation instructions.

2. In-home Instruction on how to use your product.

3. Service to correct improper product maintenance or installation, installation

not in accordance with electrical or plumbing codes or correction of

household electrical or plumbing (i.e. house wiring, fuses or water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water ﬁlters, etc.).

5. Defects or damage caused by the use of non-genuine Maytag parts

or accessories.

6. Conversion of your product from natural gas or L.P. gas.

7. Damage from accident, misuse, abuse, ﬁre, ﬂoods, acts of God or use with

products not approved by Maytag.

8. Repairs to parts or systems to correct product damage or defects caused

by unauthorized service, alteration or modiﬁcation of the appliance.

9. Cosmetic damage including scratches, dents, chips, and other damage to

appliance ﬁnishes unless such damage results from defects in materials and

workmanship and is reported to Maytag within 30 days.

10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive

environments including but not limited to high salt concentrations, high

moisture or humidity or exposure to chemicals.

11. Food loss due to product failure.

12. Pick-up or delivery. This product is intended for in-home repair.

13. Travel or transportation expenses for service in remote locations where an

authorized Maytag servicer is not available.

14. Removal or reinstallation of inaccessible appliances or built-in ﬁxtures (i.e.

trim, decorative panels, ﬂooring, cabinetry, islands, countertops, drywall,

etc.) that interfere with servicing, removal or replacement of the product.

15. Service or parts for appliances with original model/serial numbers removed,

altered or not easily determined.

The cost of repair or replacement under these excluded circumstances shall

be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or ﬁtness, so this limitation may not apply to you. This warranty gives you speciﬁc

legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations

contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you

should ask Maytag or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. MAYTAG

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of

incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you speciﬁc legal rights, and you

also may have other rights that vary from state to state or province to province.

https://www.maytag.com/

product_help

INSTRUCTIONS D'UTILISATION DU FOUR

À MICRO-ONDES ÉLECTRIQUE ENCASTRÉ

COMBINÉ – FOUR INFÉRIEUR

MERCI d'avoir acheté ce produit de grande qualité. Enregistrer le four sur www.maytag.com. Au Canada, enregistrer le four sur

www.maytag.ca.

Pour référence ultérieure, consigner par écrit les numéros de modèle et de série de votre produit. Ces derniers peuvent se trouver

dans le coin droit du cadre du four à micro-ondes, à l'intérieur de la porte du four à micro-ondes.

Numéro de modèle _____________________________________ Numéro de série ________________________________________

Table des matières

SÉCURITÉ DU FOUR ...................................................................15

GUIDE DES CARACTÉRISTIQUES .............................................17

UTILISATION DU FOUR ...............................................................19

Commandes électroniques du four ...........................................19

Mode Sabbat ..............................................................................20

Papier d’aluminium ....................................................................20

Positionnement des grilles et des

ustensiles de cuisson au four ....................................................21

Grille déployante ........................................................................21

Évent du four ..............................................................................22

Cuisson au four et rôtissage ......................................................22

Cuisson au gril ............................................................................22

Cuisson par convection .............................................................23

Maintien au chaud ......................................................................24

Cuisson et maintien au chaud ...................................................24

Durée de cuisson .......................................................................25

ENTRETIEN DU FOUR .................................................................26

Programme d’autonettoyage .....................................................26

Nettoyage général ......................................................................27

Lampes du four ..........................................................................27

DÉPANNAGE .................................................................................28

ACCESSOIRES .............................................................................29

GARANTIE .....................................................................................30

SÉCURITÉ DU FOUR

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

CONSERVEZ CES INSTRUCTIONS

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

AVERTISSEMENT : Pour réduire le risque d’incendie, de

choc électrique, de blessures corporelles ou de dommages

lors de l’utilisation du four, il convient d’observer certaines

précautions élémentaires dont les suivantes :

■ Installation appropriée – S’assurer que le four est

convenablement installé et relié à la terre par un technicien

qualifié.

■ Ne jamais utiliser le four pour chauffer ou réchauffer

une pièce.

■

Ne pas laisser les enfants seuls – Les enfants ne doivent

pas être laissés seuls ou sans surveillance dans la pièce

où le four est en service. Ne jamais laisser les enfants

s’asseoir ou se tenir sur une partie quelconque du four.

■ Porter des vêtements appropriés – Les vêtements amples

ou détachés ne doivent jamais être portés pendant

l’utilisation du four.

■ Entretien par l’utilisateur – Ne pas réparer ni remplacer

toute pièce du four si ce n’est pas spécifiquement

recommandé dans le manuel. Toute autre opération

d’entretien ou de réparation doit être confiée à un

technicien qualifié.

■ Ne pas utiliser d’eau pour éteindre un feu de graisse –

Étouffer le feu ou les flammes ou utiliser des extincteurs

polyvalents à produits chimiques secs ou un extincteur à

mousse.

■ Utiliser seulement des mitaines sèches de four – Des

mitaines de four mouillées ou humides sur des surfaces

chaudes peuvent provoquer des brûlures provenant de la

vapeur. Ne pas laisser les mitaines de four toucher les

éléments chauffants. Ne pas utiliser une serviette ou un

tissu épais.

■ Exercer une grande prudence lors de l’ouverture de la

porte. Laisser l’air chaud ou la vapeur s’échapper avant

d’enlever ou de remplacer un plat.

■

Ne pas faire chauffer des contenants fermés –

L’accumulation de pression peut causer une explosion du

contenant et des blessures.

■ Ne jamais obstruer les ouvertures des évents.

■ Placement des grilles du four – Toujours placer les grilles

du four à l’endroit désiré, lorsque le four est froid. Si la

grille doit être déplacée lorsque le four est chaud, ne pas

laisser des mitaines de four toucher l’élément chauffant

dans le four.

■

Remisage dans le four – Des matériaux inflammables ne

doivent pas être remisés dans un four.

■

NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU

LES SURFACES INTÉRIEURES DU FOUR – les éléments

chauffants peuvent être chauds

même s’ils ont une teinte

foncée. Les surfaces intérieures de four deviennent assez

chaudes pour causer des brûlures. Pendant et après

l’utilisation, ne pas toucher ou laisser des vêtements ou

autres matériaux inflammables venir en contact avec les

éléments chauds ou les surfaces intérieures chaudes du

four avant qu’ils aient eu assez de temps pour refroidir.

D’autres surfaces du four peuvent devenir assez chaudes

pour causer des brûlures. Ces surfaces comprennent les

ouvertures de l’évent du four et la surface près de ces

ouvertures, les portes du four et les hublots des portes

du four.

Fours autonettoyants :

■ Ne pas nettoyer le joint de la porte – Le joint de la porte est

essentiel pour l’étanchéité. Veiller à ne pas frotter,

endommager ou déplacer le joint.

■

Ne pas utiliser les produits commerciaux de nettoyage de

four – On ne doit pas utiliser un produit commercial de

nettoyage de four ou un enduit de protection des surfaces

internes du four quel qu’en soit le type, sur les surfaces du

four ou les surfaces voisines.

■ Nettoyer uniquement les pièces indiquées dans le manuel.

■

Avant d’exécuter le programme d’autonettoyage du four,

enlever la lèchefrite et sa grille et les autres ustensiles.

Avertissements de la proposition 65 de l'État de Californie :

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

cancers.

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

malformations et autres déficiences de naissance.

GUIDE DES CARACTÉRISTIQUES

Ce manuel couvre différents modèles. Le modèle que vous avez peut comporter toutes les caractéristiques énumérées ou seulement

certaines d'entre elles. Se reporter à ce manuel ou à la section Foire Aux Questions (FAQ) de notre site Web www.maytag.com pour des

instructions plus détaillées. Au Canada, consulter la section service à la clientèle à www.maytag.ca. Pour obtenir plus d’information sur

une caractéristique ou sur les étapes pour utiliser les caractéristiques mentionnées, consulter la section titre de la caractéristique.

AVERTISSEMENT

Risque d'empoisonnement alimentaire

Ne pas laisser des aliments dans un four plus d'une

heure avant ou après la cuisson.

Le non-respect de cette instruction peut causer un

empoisonnement alimentaire ou une maladie.

Touche Caractéristique Instructions

CLOCK (horloge) Horloge

Cette horloge peut utiliser un programme de 12 ou 24 heures. Voir la section

“Commandes électroniques du four”.

1. Appuyer sur CLOCK (horloge) jusqu’à afﬁcher “CLOCK” (horloge).

2. Appuyer sur les touches numériques pour régler l'heure du jour.

3. Appuyer sur START LOWER (mise en marche four inférieur).

LIGHT (lumière) Lampe de

la cavité du four

Alors que la(les) porte(s) du four sont fermées, appuyer sur OVEN LIGHT (lampe du

four) pour allumer ou éteindre la (les) lampe(s). La (Les) lampe(s) du four s'allument à

l'ouverture de la porte.

KITCHEN TIMER ON/

OFF (marche/arrêt

minuterie)

Minuterie

du four

La minuterie peut être réglée en heures ou en minutes jusqu’à concurrence de 9 heures

et 59 minutes.

1. Appuyer sur KITCHEN TIMER ON/OFF (marche/arrêt minuterie).

2. Appuyer sur les touches numériques pour régler la durée en hr-min. Les zéros de

gauche peuvent ne pas être entrés. Entrer “2” pour 2 minutes par exemple.

3. Appuyer sur KITCHEN TIMER ON/OFF (marche/arrêt minuterie) pour commencer

le compte à rebours. Si activés, le (les) signal (signaux) sonore(s) de la minuterie

retentissent à la ﬁn du compte à rebours.

4. Appuyer sur KITCHEN TIMER ON/OFF (marche/arrêt minuterie) pour annuler

la minuterie et revenir à l’heure du jour. Ne pas appuyer sur la touche Cancel

(annulation), sinon le four s’éteindra.

START

(mise en marche)

Démarrage

de la cuisson

La touche Start (mise en marche) met en marche n’importe quelle fonction du four. Si,

après avoir appuyé sur une touche, on n’appuie pas sur Start (mise en marche) dans

les 2 minutes qui suivent, la fonction est annulée et l’heure s’afﬁche.

CANCEL

(annulation)

Fonction du four

La touche Cancel (annulation) désactive toutes les fonctions du four à l'exception

de l'horloge, de la minuterie et du verrouillage des commandes du four sélectionné.

BAKE

(cuisson au four)

Cuisson au four

et rôtissage

1. Appuyer sur BAKE (cuisson au four).

2. Utiliser les touches numériques pour régler la température souhaitée. Si la

température entrée ne se trouve pas dans la fourchette des températures autorisées,

la température minimale ou maximale autorisée s'afﬁche. Entrer une température

dans la fourchette autorisée.

3. Appuyer sur START LOWER (mise en marche four inférieur).

4. Pour modiﬁer la température, répéter les étapes 2 et 3.

5. Appuyer sur CANCEL LOWER (annulation four inférieur) après avoir terminé.

Touche Caractéristique Instructions

BROIL

(cuisson au gril)

Cuisson au gril

1. Appuyer sur BROIL (cuisson au gril).

2. Utiliser les touches numériques pour régler la température souhaitée. Si la

température entrée ne se trouve pas dans la fourchette des températures autorisées,

la température minimale ou maximale autorisée s'afﬁche. Entrer une température

dans la fourchette autorisée.

3. Appuyer sur START LOWER (mise en marche four inférieur), et laisser le four

préchauffer pendant 2 minutes.

4. Placer les ustensiles de cuisine dans le four et fermer la porte du four.

5. Appuyer sur CANCEL LOWER (annulation four inférieur) après avoir terminé.

CONVECT

(convection)

Cuisson par

convection

1. Appuyer sur CONVECT (convection) jusqu’à afﬁcher à l’écran le mode souhaité.

Suivre les instructions sur le texte en déﬁlement pour le mode désiré ou voir les

instructions spéciﬁques pour le mode désiré à la section “Cuisson à convection”.

2. Appuyer sur START LOWER (mise en marche four inférieur).

3. Utiliser les touches numériques pour régler la température souhaitée. Si la

température entrée ne se trouve pas dans la fourchette des températures autorisées,

la température minimale ou maximale autorisée s’afﬁche. Entrer une température

dans la fourchette autorisée.

4. Appuyer sur START LOWER (mise en marche four inférieur).

5. Pour changer la température, répéter les étapes 3 et 4.

6. Appuyer sur CANCEL LOWER (annulation four inférieur) après avoir terminé.

KEEP WARM

(maintien au chaud)

Maintien au

chaud

Les aliments doivent être à la température de service avant d’être placés dans le four chaud.

1. Appuyer sur KEEP WARM (maintien au chaud).

2. Utiliser les touches numériques pour régler la température souhaitée. Si la température

entrée ne se trouve pas dans la fourchette des températures autorisées, la température

minimale ou maximale autorisée s'afﬁche. Entrer une température dans la fourchette

autorisée.

3. Appuyer sur START LOWER (mise en marche four inférieur).

4. Pour changer la température, répéter les étapes 2 et 3.

5. Appuyer sur CANCEL LOWER (annulation four inférieur) après avoir terminé.

DELAY START

(mise en marche

différée)

Mise en marche

différée

La touche Delay Start (mise en marche différée) sert à entrer l’heure de mise en marche

pour un four équipé d'une fonction de mise en marche différée. Le mise en marche

différée ne doit pas être utilisée pour les aliments tels que pains et gâteaux, car ils

risquent de ne pas bien cuire.

Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section “Durée

de cuisson”.

COOK TIME

(durée de cuisson)

Cuisson minutée

La fonction de durée de cuisson permet d’allumer le four à une certaine heure de la

journée, d'effectuer une cuisson pendant une durée déterminée et/ou d’éteindre le four

automatiquement.

Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section “Durée

de cuisson”.

COOK & HOLD

(cuisson et maintien

au chaud)

Cuisson minutée

et maintien au

chaud

La fonction Cook & Hold (cuisson et maintien au chaud) permet de régler une cuisson au four

pendant une durée déterminée suivie d'un programme de maintien au chaud d'une (1) heure.

Pour régler une cuisson et maintien au chaud ou une cuisson différée et maintien au chaud,

voir la section “Cuisson et maintien au chaud”.

SELF CLEAN

(autonettoyage)

Programme

d'autonettoyage

Voir la section “Programme d’autonettoyage”.

CONTROL LOCK

hold 3 sec.

(commandes

verrouillées appuyer

pendant 3 sec.)

Verrouillage des

commandes du

four

1. Vériﬁer que toutes les fonctions du four et de la table de cuisson sont désactivées,

y compris les fonctions de minuterie et de cuisson minutée.

2. Appuyer sans relâcher sur CONTROL LOCK (commandes verrouillées) pendant

3 secondes.

3. Si cette fonction est activée, un signal sonore retentit et les commandes sont verrouillées.

4. Répéter pour déverrouiller. Aucune touche ne fonctionne lorsque les commandes

sont verrouillées.

SETTINGS

(réglages)

Fonctions

d'utilisation

du four

Permet de personnaliser les signaux sonores audibles et le fonctionnement du four pour

convenir à vos besoins. Voir la section “Utilisation du four”.

UTILISATION DU FOUR

Des odeurs et de la fumée sont normales lorsque le four est utilisé

la première fois, ou lorsqu’il est très sale.

IMPORTANT : Certains oiseaux sont très sensibles aux

émanations de fumée. L’exposition aux émanations peut entraîner

la mort de certains oiseaux. Toujours déplacer les oiseaux dans

une autre pièce fermée et bien aérée.

Commandes électroniques du four

Afﬁchage des commandes

L’afﬁchage clignote lorsqu’il est mis en marche ou après une

coupure de courant. Lorsque le four n’est pas en marche, l’heure

du jour est afﬁchée.

Signaux sonores

Les signaux sonores indiquent ce qui suit :

Un seul signal sonore

■ Appui sur une touche valide

■ Le four est préchauffé (signal sonore long).

■ Minuteur de cuisine (signal sonore long avec signal sonore

de rappel toutes les 60 secondes)

■ Fonction entrée.

Trois signaux sonores

■ Appui sur une touche non valide

Quatre signaux sonores

■ Fin de programme (avec signal sonore de rappel toutes

les 60 secondes)

Appuyer sur la touche Settings (réglages) pour modiﬁer

les réglages des signaux sonores.

Réglages

De nombreuses caractéristiques du module de commande du four

peuvent être ajustées pour répondre à vos besoins. On effectue

ces changements à l’aide de la touche Settings (réglages).

Utiliser la touche Settings (réglages) pour faire déﬁler les

caractéristiques qui peuvent être modiﬁées. L’afﬁchage passe au

réglage suivant à chaque pression supplémentaire sur Settings

(réglages). Après avoir sélectionné la caractéristique à modiﬁer,

le tableau de commande demande à l’utilisateur d’effectuer la

manoeuvre nécessaire. Les sections suivantes détaillent toutes les

modiﬁcations de caractéristiques.

Appuyer sur CANCEL LOWER (annulation four inférieur) pour sortir

du mode Settings (réglages).

Fahrenheit et Celsius

Le four est préréglé pour un afﬁchage de la température en degrés

Fahrenheit, mais on peut le permuter en degrés Celsius.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que

“TEMP UNIT” (unité de température) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Désactivation des signaux sonores

Désactive tous les signaux sonores, y compris le signal sonore de

ﬁn de programme et les signaux sonores d’appui sur une touche,

sauf les signaux sonores de rappel. Les signaux sonores de rappel

restent actifs lorsque les sons sont désactivés.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “SOUND”

(signaux sonores) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Volume sonore

Règle le timbre du signal sonore à bas ou élevé.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “SOUND

VOLUME” (volume sonore) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Signal sonore de ﬁn de programme

Active ou désactive les signaux sonores qui retentissent à la ﬁn

d’un programme.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “END TONE”

(signal de ﬁn) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Signaux sonores d’appui sur une touche

Active ou désactive les signaux sonores lorsqu’on appuie sur une

touche.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “KEYPRESS

TONE” (signal de pression sur une touche) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Désactivation des signaux sonores de rappel

Désactive les courts signaux sonores qui retentissent toutes les

minutes après les signaux sonores de ﬁn de programme.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que

“REMINDER TONE” (signal de rappel) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Horloge 12/24 heures

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “12/24

HOUR” s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Arrêt au bout de 12 heures

La commande du four est réglée pour éteindre le four

automatiquement 12 heures après que le four a activé une fonction

de cuisson ou de nettoyage. Ceci ne perturbera aucune fonction

de cuisson minutée ou différée.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “12 HR

AUTO OFF” (arrêt auto au bout de 12 heures) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur) pour

quitter ce mode et afﬁcher l’heure.

Langues – Menu d’afﬁchage déroulant

Les options de langues sont l’anglais et le français.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que

“LANGUAGE” (langue) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur les touches numériques comme indiqué par le

texte déroulant aﬁn de sélectionner la nouvelle température.

4. Appuyer sur CANCEL LOWER (annulation four inférieur) pour

quitter ce mode et afﬁcher l’heure.

Commande de décalage de température du four

IMPORTANT : Ne pas utiliser de thermomètre pour mesurer

la température du four. Les éléments chauffants s’allument

et s’éteignent en alternance pour maintenir une température

constante, mais leur température peut varier légèrement dans

un sens ou dans l’autre du fait de cette alternance. De nombreux

thermomètres réagissent lentement à un changement de

température, et ne donneront pas une mesure exacte du

fait de cette alternance.

Le four fournit des températures précises; toutefois, il peut cuire

plus rapidement ou plus lentement que votre four précédent,

c’est pourquoi la température peut être ajustée à vos besoins de

cuisson. Elle peut être modiﬁée en degrés Fahrenheit ou Celsius.

Ajustement de la température du four :

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “TEMP

CALIB” (calibrage de la température) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche. Fours doubles

uniquement : Appuyer sur la touche “1” pour passer du four

supérieur au four inférieur et inversement.

3. Appuyer sur START LOWER (mise en marche four inférieur)

pour sélectionner le choix afﬁché à l’étape 2. Attendre quelques

secondes pour laisser l’afﬁchage changer ou appuyer sur

START LOWER (mise en marche four inférieur), puis passer

à l’étape 4.

4. Appuyer sur la touche “3” pour augmenter la température

par tranches de 5°F (3°C), ou appuyer sur la touche “6” pour

diminuer la température par tranches de 5°F (3°C). La plage de

température doit se situer entre -30°F et +30°F (-18°C à +18°C).

5. Appuyer sur START LOWER (mise en marche four inférieur).

6. Appuyer sur CANCEL LOWER (annulation four inférieur) pour

quitter ce mode et afﬁcher l’heure.

Mode démo

IMPORTANT : Ce mode est conçu pour le personnel de vente

en rayon avec une alimentation de 120V et permet de présenter

le fonctionnement des caractéristiques du tableau de commande

sans pour autant activer les éléments de chauffage. Si cette

caractéristique est activée, le four ne fonctionnera pas.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “DEMO

MODE” (mode de démonstration) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur CANCEL LOWER (annulation four inférieur)

pour quitter ce mode et afﬁcher l’heure.

Mode Sabbat

Le mode Sabbat maintient le réglage de cuisson au four tant que

le four n’est pas éteint.

Lorsque le mode Sabbat est réglé, seul le programme de cuisson

au four fonctionne. Tous les autres programmes de cuisson et de

nettoyage sont désactivés. Aucun signal sonore ne retentit et les

afﬁchages n’indiquent pas les changements de température.

Lorsque la porte du four est ouverte ou fermée, la lampe du four

ne s’allume ou ne s’éteint pas et les éléments de chauffage ne

s’allument ou ne s’éteignent pas immédiatement.

REMARQUE : Si une panne de courant se produit lorsque le mode

Shabbath est en fonction, le four indiquera que ce mode est en

fonction, mais le programme de cuisson ne fonctionnera pas. La

lumière du four s’allumera si la porte est ouverte pendant cette

période.

Activation du mode Sabbat (une seule fois) :

1. Appuyer sur SETTINGS (réglages) jusqu’à afﬁcher “SABBATH”.

2. Appuyer sur la touche 1. Le mode Sabbat peut être utilisé pour

la cuisson au four.

3. Appuyer sur CANCEL LOWER (annulation four inférieur) pour

sauvegarder les réglages et quitter pour afﬁcher l’heure.

REMARQUE : Pour désactiver le mode Sabbat, répéter les

étapes 1 à 3 pour changer l’état de “SABBATH ON” (mode

Sabbat actif) à “SABBATH OFF” (mode Sabbat inactif).

Activation du mode Sabbat :

1. Appuyer sur la touche BAKE (cuisson au four).

2. Utiliser les touches numériques pour régler la température

souhaitée. Si la température entrée ne se trouve pas dans

la fourchette des températures autorisées, la température

minimale ou maximale autorisée s’afﬁche. Entrer une

température dans la fourchette autorisée.

3. Appuyer sur START LOWER (mise en marche four inférieur).

Pour une cuisson minutée au mode Sabbat, appuyer sur COOK

TIME (durée de cuisson), puis sur les touches numériques pour

régler la durée de cuisson désirée. Appuyer sur START LOWER

(mise en marche four inférieur).

4. Appuyer sur SETTINGS (réglages). Trois signaux sonores

retentissent. Ensuite, appuyer sur “7”. “SAb” apparaît sur

l’afﬁchage.

Réglage de la température :

1. Appuyer sur les touches numériques comme indiqué par le

texte déroulant aﬁn de sélectionner la nouvelle température.

REMARQUE : Le changement de température n’apparaît pas

sur l’afﬁchage et aucun son n’est émis. Le texte déroulant

s’afﬁche tel qu’il était avant que l’on n’appuie sur la touche.

2. Appuyer sur START LOWER (mise en marche four inférieur).

Désactivation du mode Sabbat :

Appuyer sur SETTINGS (réglages), puis “7” pour revenir à

la cuisson au four traditionnelle ou appuyer sur CANCEL

LOWER (annulation four inférieur) pour éteindre le four.

Papier d’aluminium

IMPORTANT : Pour éviter des dommages permanents au ﬁni

du fond du four, ne pas recouvrir le fond du four avec du papier

d’aluminium ou un revêtement quelconque.

Pour assurer une bonne circulation de l’air et des résultats de

cuisson optimaux, ne pas recouvrir la grille entière de papier

d’aluminium.

La page charge ...

Maytag MMW9730FZ Manuel utilisateur

Marque: Maytag

Modèle: MMW9730FZ

Catégorie: Cuisinières

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MMW9730FZ User manual

Maytag MMW9730FZ Manuel utilisateur

Maytag MMW9730FZ Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents